PERSPECTIVE DRAWING

Step 1Quarter the page as shown with light lines.

Where the middle line touches the border mark two points - these are called .... RVP and LVP (Right and Left Vanishing Points).

Step 2Mark out measurements 50mm down 75mm up from the centre.

Add the verticals as light construction lines. There are only three types of lines to be made, vertical lines or lines to the right VP or left VP . Draw 2 vertical lines 35mm right 50mm left of centre.

Step 3Darken in the lines as shown.

Step 4Repeat previous steps to create another building Estimate the sizes.

Step 5Darken in

Step 6Add another building draw lightly to begin with

Step 7Darken the lines

Step 8add another

Step 9and another remember to draw lightly to start

Step 10darken in lines

Step 11

shade the right hand side of the buildings as shown.

Step 12Add some light lines as shown to suggest road and pavement. Add windows

and doors to buildings.