Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
IE3
IE2
IE1
IE4
PERMANENT MAGNETSYNCHRONOUS MOTOR
PM MOTOR DRIVE SYSTEM
IE4 SUPER PREMIUM EFFICIENCY*
0.4 – 55kW
IE4 SUPER PREMIUM EFFIENCY
We serialize the PM motor which equals to IEC60034-30 highest e�ciency IE4 SUPER PREMIUM. And it is 3–8% more e�ciency than IE1.
Same frame as Induction Motor
The same frame size and full length as induction motor, so it is compatible with Induction motor.
length
frame size
79
83
81
770.75 2.2 5.5 11 18.5 30 45
85
87
89
91
93
95
97
E�ciency (%)
Output (kW)
* Equals to IEC60034-30 Ed.2’s IE4 e�ciency which is under revision deliberation.
4 Poles 60Hz
CKGB-0401
AB
D
KL
KE
E
F F XB
L
D
KL
E E
KE F F XB
L
D
KL
KE
E
F
L
D
KL
KE F
L
R
B Q
QRQRQRQR
W
S
T
I
HI
H
I
HH
U
QK
F XB
E E
R
B Q
QKKA
F XB
E
Z
Z
JKZ
Z
JKJK
0.4Applied Inverter Model VF-S15 VF-AS1
Applied Motor Output0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55
R
B Q
QK
R
B Q
QK
E
4–∅Z hole4–∅Z hole
∅KD hole ∅KD hole ∅KD hole ∅KD hole
0100200300400500600700800
140
120
100
80
60
40
20
0180 540 1800 2160
Loss (W)
Torque (%)
Speed (min−1)
5.5kW
Induction motor (standard e�ciency) PM Motor
Figure 1 Figure 2 Figure 3 Figure 4 Bearing Details
C0 −
0.5
C0 −
0.5
C0 −
0.5
C0 −
0.5
Standard speci�cation
Outline Dimension
Energy Saving Evolved Motor Technique
Allowable Torque
Inverter
Stator
PermanentMagnet
325W760WRotor
* Figure.
Allowable Continues TorqueBreakdown Torque
Typical Application: Variable Torque Load (Pump, Fan, etc)
TOSHIBA’s PM motor is designed for performing high torque and high e ciency through minimizing the amount used of permanent magnets by optimum arrangement of the magnets.
Comparing with induction motor, PM motor turns loss reduction signi�cantly into reality as no loss occurring in rotor. Also, it lowers the rise in temperature, so long life and superior energy saving e�ect is expected.
TOSVERT ™ VF-S15/ VF-AS1 has “PM Motor Control Mode” function to control PM motor.
580, Horikawa-cho, Saiwai-ku, Kawasaki-City, Kanagawa, 212-0013, JapanThe information in this brochure is subject to change without notice.
Precautions
• Please read the instruction manual before installing or operating our products.
• This product is intended for general purpose uses in industrial application. It cannot be used applications where may cause big impact on public uses, such as power plant and railway, and equipment which endanger human life or injury, such as nuclear power control, aviation, space ¥ight control, tra¦c, safety device, amusement, or medical. It may be considerable whether to apply, under the special condition or an application where strict quality control may not be required. Please contact our headquarters, branch, or local o¦ces printed on the front and back covers of this catalogue.
•When exporting our products separately or combined with your equipment, please be sure to satisfy the objective conditions and inform conditions listed in the export control policies, so called Catch All restrictions, which are set by the Ministry of Economy, Trade and Industry of Japan, and the appropriate export procedures must also be taken.
• Please use our product in applications where do not cause serious accidents or damages even if product is failure, or please use in environment where safety equipment is applicable or a back-up circuit device is provided outside the system.
57%Loss reduction
TOSHIBA INDUSTRIAL PRODUCTS AND SYSTEMS CORPORATION
Frame No.
Output(kW) Poles Figure
No.Dimension (mm) Bearing No. Approx.
weight (kg)B C D E F H I L R Z XB JK KA KD KE KL Q QK QR S W T U D.E N.D.E71M 0.4
41 86 71 150 56 45 148 — 242 120 7 45 3 — 22 105 132 30 22 1.3 14 5 5 3 6203 6203 13
80M 0.75 1 95 80 150 62.5 50 155 — 264.5 140 10 50 3 — 22 108.5 134 40 32 0.5 19 6 6 3.5 6204 6204 1690L 1.5
6
2 113.5 90 198 70 62.5 190 — 311.5 168.5 10×12 56 5 — 27 120.5 147 50 40 0.5 24 8 7 4 6205 6304 13.5100L 2.2 2 128 100 198 80 70 200 — 350.5 193 12×14 63 5 — 27 120.5 147 60 45 0.5 28 8 7 4 6206 6304 17112M 3.7 2 134 112 214 95 70 219 261 386 200 12×14 70 5 — 27 127.5 154 60 45 1.5 28 8 7 4 6207 6305 23132S 5.5 2 152 132 252 108 70 257 303 449.5 239 12×14 89 5 — 35 158.5 189 80 63 0.5 38 10 8 5 6308 6306 36132M 7.5 2 171 132 252 108 89 257 303 487.5 258 12×14 89 5 — 35 158.5 189 80 63 0.5 38 10 8 5 6308 6306 41160M 11 3 205 160 304 127 105 305 351 625 323 14.5×18.5 108 5 22 52 204.5 257.5 110 90 2 42 12 8 5 6310 6208 67160L 15 3 227 160 304 127 127 305 351 625 345 14.5×18.5 108 5 — 52 204.5 257.5 110 90 2 42 12 8 5 6310 6208 74
180M18.5
4 235.5 180 382 139.5 120.5 371 431 671.5 351.5 14.5 121 — — 60 270 335 110 90 0.5 48 14 9 5.5 6310C3 6210C3135
22 140180L 30 4 254.5 180 382 139.5 139.5 371 431 709.5 370.5 14.5 121 — — 91 270 335 110 90 1.5 55 16 10 6 6312C3 6210C3 175
200L37
4 279.5 200 420 159 152.5 410 470 799.5 425.5 18.5 133 — — 91 290 355 140 110 1.5 60 18 11 7 6313C3 6312C3245
45 250225S 55 4 286 225 464 178 143 457 517 812.5 432 18.5 149 — — 91 335 425 140 110 1.5 65 18 11 7 6315C3 6312C3 305
ITEM SPECIFICATION
Inverter Input Voltage Class 200 V or 400 V
Rated Output (kW) 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55
Frame No. 71M 80M 90L 100L 112M 132S 132M 160M 160L 180M 180L 200L 225S
Rated Torque (N.m) 2.12 3.98 7.96 11.7 19.6 29.2 39.8 58.4 79.6 98.2 117 159 196 239 292
Poles (Rated Frequency) 4 Poles (60Hz) 6 Poles (90Hz)
Rated / Full Load Speed (min−1) 1800 / 2160
Time Rating Continuance
Thermal Class Class B Class F
Degree of Protection IP44
Ambient Conditions
Ambient Tempreture -10 – 40˚C (operating temperature limit)
Humidity Up to 90%RH (No Condensation)
Altitude Up to 1000m
Installation Indoors; Protects from Corrosive Gas / Explosive Gas / Steam
Coating Color Equals to Munsell N1.5
Note: Please be sure use with following Inverter.
2013 - 11