Performance Rubber & Additives - obs.schall-messen.de

Performance Rubber & Additives

Portfolio Germany

Accelerators AntioxidantsBatch-Off-Release Agents Blowing AgentsCarbon BlacksCo-AgentsPolybutenesPolymerbound AcceleratorsPolymersProcessing AidsSilicone Rubber Stearic Acid

2

Content

Polymers 5

EP(D)M – Ethylene-Propylene Rubber 5 IIR – Isobutene-Isopropene Rubber 5NBR - Acrylonitrile-Butadiene Rubber 6 HNBR – Hydrogenated Butadiene Acrylonitrile Co-Polymer 8 BR – Butadiene Rubber 9 SBR – Styrene Butadiene Rubber 9 CPE – Chlorinated Polyethylene 9CSM – Chlorosulfonated Polyethylene 10FKM – Fluorocarbon Rubber 10

Carbon Blacks 12

Reinforcing Grades 12Semi Reinforcing Grades 13Conductive Grades 13 Class A Grades 13 Low PAH Grades 13Endure Series 14

Blowing Agents 14

Processing Aids 15

Flow Improver 15 Lubricants 15

Polybutenes 16

Polymerbound Accelerators 16

Sulfenamides 16Thiazoles 16 Dithiocarbamates 16 Guanidines 16 Thiurams 16 Thioureas 17 Special Accelerators 17 Vulcanizing Agents 17 Metal Oxide 17 Scorching Retarders 17

3

Stearic Acid 17

Batch-Off-Release Agents 18

Liquids 18 Dispersions 18 Powders 18

Antioxidants 18

Accelerators / Pure substances 19

Co-Agents 20

Biesterfeld TAC 20

Silicone Rubber 20

HCR Bases 20 HCR Compounds and FSR Compounds 21 LSR 21 FSR Bases 22 F-LSR 23 RTV 23

Silicone Rubber Additives 24

Flame Retardants, Heat Stabilizer, Processing Aids 24Silicone Rubber Color Masterbatches 24

4

Our Partners ...

5

Polymers

EP(D)M – Ethylene-Propylene Rubber

Copolymers EPM

EPDM

EPDM (Bimodal)

EPDM (Metallocene)

Cure rateProduct Application informationEthylen Content

Diene Content

MWDMooney Viscosity

Vistalon 404Vistalon 703Vistalon 706Vistalon 722Vistalon 785Vistalon 805Vistalon 1703 PVistalon 2504 NVistalon 3666Vistalon 7500Vistalon 7700Vistalon 8600Vistalon 9600Vistalon 8700Vistalon 8800Vistalon 8800 DVistalon 5601Vistalon 7001Vistalon 9301

high temperature applicationhigh green strengthhigh flex crack resistanceelectric properties, green strengthhoses, beltsvery high green strengthgreen strength, surfaceelectric properties, brake padssoft parts, blendsfast curing, good CSfast curing, good CS, high loadingvery fast curing, Spongevery fast curing, Spongevery fast curing, excellent CSvery fast curing, Spongevery fast curing, Spongegreen strength, high perform.rapid extrusion, inj.-mouldingroofing and sheeting

44,5 %72,5 %65,0 %72,0 %49,0 %78,0 %76,8 %55,5 %64,0 %55,5 %55,5 %57,5 %57,5 %63,0 %53,5 %54,0 %68,5 %73,0 %69,0 %

------

0,9 % *3,8 %4,5 %5,7 %7,0 %8,9 %9,0 %8,0 %10,0 %10,0 %5,0 %5,0 %2,8 %

very widenarrowbimodalnarrownarrownarrow

very widewide

mediumbimodalbimodalbimodalbimodalbimodalbimodalbimodaltailoredtailorednarrow

28 ML(1+4)125°C21 ML(1+4)125°C42 ML(1+4)125°C17 ML(1+4)125°C30 ML(1+4)125°C33 ML(1+4)125°C25 ML(1+4)125°C25 ML(1+4)125°C

52 ML(1+4)125°C (x)82 ML(1+4)125°C83 ML(1+8)150°C81 ML(1+4)125°C93 ML(1+8)150°C78 ML(1+4)125°C

73 ML(1+4)125°C (x)105 ML(1+8)125°C72 ML(1+4)125°C60 ML(1+4)125°C67 ML(1+4)125°C

IIR – Isobutene-Isopropene Rubber

Exxon Chlorobutyl CIIR

Exxon Bromobutyl BIIR

Exxpro

Butyl

Density (g/cm3)

Grade

Mooney Viscosity, ML (1+8) 125°C

Antioxydant Content Functional Content

10662211222222442255303534333745065S268S365S

0,920,930,930,930,930,930,930,930,920,920,92

38 ± 432 ± 432 ± 446 ± 546 ± 545 ± 535 ± 545 ± 529 - 3546 - 5630 - 36

0,02 %0,02 %0,02 %0,02 %0,02 %

---

0,03 %0,03 %0,03 %

non stainingnon stainingnon stainingnon stainingnon staining

---

non stainingnon stainingnon staining

1,26±0,081,08±0,151,03±0,301,08±0,151,03±0,300,47±0,050,75±0,071,10±0,100,85 - 1,251,50 - 1,902,00 - 2,60

w-% Chlorinemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Unsaturationmol-% Unsaturationmol-% Unsaturation

(x) - contains process oil: Vistalon 8800: 15phr / Vistalon 3666: 75phr * - VNB

Product

6

NBR – Acrylonitrile-Butadiene Rubber

Standard Grades

Low acrylonitrile content

Medium acrylonitrile content

Medium high acrylonitrile content

NBR 1845

NBR 1855

NBR 1865

NBR 2645

NBR 2655

NBR 2665

NBR 2675

NBR 3335

NBR 3345

NBR 3365

NBR 3385

45±355±365±3

45±355±365±375±3

35±345±365±385±10

0,80,80,8

0,80,80,80,8

0,80,80,80,8

0,50,50,5

0,50,50,50,5

0,50,50,50,5

17-2017-2017-20

27-3027-3027-3027-30

31-3531-3531-3531-35

17,617,617,6

22,523,523,523,5

22,522,523,524

450450450

450450450450

45045045045

Automotive transmission belts, hoses, O rings, gaskets, seals, packers

Fuel and oil hoses, gaskets, oil seals, packers, conveyor belts

Cables, hoses, conveyor and driving belts, gaskets, oil seals, shoe products, industrial and automotive molded parts

Mooney viscosity ML 1+4 (100 °C)



Volatile matter content, %, max



Ash content, %, max

Ash content, %, max

Ash content, %, max

Acrylonitrile content, %



Tensile strength at stretching, MPa, min



Relative elongation at break, %, min



Application

Application

Application

Copolymer of acrylonitrile (17-20 %) and 1,3-butadiene obtained by emulsion polymerization method with the use of phyto-genous fatty acid soaps as emulsifier in accordance with the ecologically clean technology, contains non-staining antioxidant. Medium oil and fuel resistance, medium gas impermeability. Operating temperature range from - 60° C to + 100 °C

Copolymer of acrylonitrile (27-30 %) and 1,3-butadiene obtained by emulsion polymerization method with the use of phyto-genous fatty acid soaps as emulsifier in accordance with the ecologically clean technology, contains non-staining antioxidant. High oil and fuel resistance, heat resistance. Operating temperature range from - 30° C to + 120 °C

Copolymer of acrylonitrile (31-35 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. High oil and fuel, abrasion, heat resistance, medium gas impermeability. Operating temperature range from -20° C to +120 °C

Product

Product

Product

7

High acrylonitrile content

Special Grades

NBR 4045

NBR 4055

NBR 4065

NBR 2675 FC

NBR 3335 FC

NBR 3345 FC

grade 1

grade 2

45±355±365±3

75±3

35±3

45±3

50-6566-80

0,80,80,8

≤0,8

≤0,8

≤0,8

0,80,8

0,50,50,5

≤0,5

≤0,5

≤0,5

11

36-4036-4036-40

27-30

31-35

31-35

28-3228-32

42525

2,1±0,8

1,1±0,5

1,3±0,5

2525

425425425

18,6±2,3

16,3±0,5

17,6±2,2

2,9±1,2

3,1±1,2

3,1±1,2

4,3±1,3

5,2±1,6

4,8±1,4

9,0±2,4

13,5±3,3

12,2±3,0

450450

Oil and fuel hoses, gaskets, seals, reinforced hoses for transfer oil, petroleum products

NBR FC are the special products which designed for injection moulding application.During the process of high-temperature moul-ding and vulcanization of rubber goods these grades significantly reduce tendency to residue formation on the curing surface of rubber moulds and allow cycle time reduction

Cables, reinforced hoses, wires, gaskets, shoes, belts




NBR 26

PVC 30




Ash content, %, max

Ash content, %, max

Ash content, %, max


Acrylo-nitrile content, %






Application

Cure characteristics (MDR 2000 Rheometer of Alpha Technologies, 160 º C - 30min)

Minimal torque (ML), dNm

Maximum torque (MH), dNm

Scor-ching time (ts1), min

50% curing time (t50), min

90% curing time (t90), min

Application

Application

Copolymer of acrylonitrile (36-40 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. Very high oil resistance, heat resistance, medium gas impermeability. Suitable for injection moulding, mould pressing and extrusion. Operating temperature range from - 10° C to + 120 °C

NBR/PVC

The NBR-PVC compound is a homogeneous of an acrylonitrile butadiene copolymer with PVC. The rubber is obtained as a result of joint coagulation of butadiene-acrylonitrile latex with polyvinylchloride latex. Contains non-staining antioxidant. The main advantage in relation to traditional nitrile rubbers is its exceptional resistance to ozone. Operating temperature range from - 30° C to + 120 °C

NBR FC

Fast curing, low mold fouling and easy processing

Product

Product

8

HNBR – Hydrogenated Butadiene Acrylonitrile Co-Polymer

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

Zhanber

ACN content (%)


Hydrogenation Degree (%)

Iodine value (mg/100mg)

ZN28255ZN35053ZN35056ZN35058ZN350512ZN35153ZN35156ZN35158ZN35253ZN35256ZN35258ZN35355ZN39057ZN43056ZN43058ZN43156ZN43259

2836363636363636343434353942424242

50356585

>110356080356080507065856590

9099999999959595909090859999999590

23-314-104-104-104-1011-1711-1711-1723-3123-3123-3152-604-104-104-1011-1718-26

Powder and pre-crosslinked NBR

NBR 33CL

PNBR 33CL

PNBR 3355

PNBR 3365

35-85

49-61

50-60

61-70

0,5

0,8

0,8

0,8

0,5

/

/

/

31-35

31-35

31-35

31-35

23,5

/

/

/

450

/

/

/

/

6 to 12

6 to 10

6 to 10

/

99

99

99

SIBUR can produce cross linked grades on request in two forms: bales or powder



Ash content, %, max

Acryloni-trile con-tent, %



Anti-agglo-merator (PVC)*, %

The size of particles is less than 1,00 mm*, %, not less

Application

Copolymer of acrylonitrile (36-40 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. Very high oil resistance, heat resistance, medium gas impermeability. Suitable for injection moulding, mould pressing and extrusion. Operating temperature range from - 10° C to + 120 °C

NBR NT Typen

NBR-2645 NT

NBR-3335 NT

NBR-3345 NT

NBR-3375 NT

27-3031-3531-3531-35

42-4832-3842-4872-78

Colored compounds for injections moulding, carbon black compounds, automotive moulded parts, sealings, conveyor belts, industrial and hydraulic hoses, shoe soles, etc.

ACN content, wt % ML1+4 100°C Application

Copolymer of acrylonitrile (31-35 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. High oil and fuel, abrasion, heat resistance, medium gas impermeability. Operating temperature range from -20° C to +120 °C

Product

Product

Product Type

9

BR – Butadiene Rubber

CHIMEI Kibipol

CHIMEI Kibipol

CHIMEI Kibipol

CHIMEI Kibipol

PR-255PR-040PR-040SPR-060

low cis BR (<35 %)high cis BR (>97 %)high cis BR (>97 %)high cis BR (>97 %)

MV 1+4: 54MV 1+4: 45MV 1+4: 45MV 1+4: 63

Li-catalyzedNd-catalyzedNd-catalyzedNd-catalyzed

Colorless, odorlessWhite, modern tyre quality White, shoe soles, modern tyre qualityWhite, modern tyre quality

Cis content


Catalyst Properties

SBR – Styrene Butadiene Rubber

ESBR

CHIMEI Kibipol SSBR


Styrene content Functional Content

1500 stabilized1502 stabilized1778 oil extendedPR-1205 Li catalyzedPR-6256 oil extendedPR-6345 oil extendedPR-6404PR-3216PR-3285

5252

41-51474770

6265

23,5 %23,5 %23,5 %18,0 %25,0 %34,0 %

21,0 %28,0 %

stainingnon stainingnon stainingnon stainingnon staining

non staining

Dark brown, tyre qualityPale, industrial qualityPale, industrial purposeWhite (for EC label tyres)TyresTyresTyresTyresTyres

CPE – Chlorinated Polyethylene

CM 3660 T

CM 3690

CM 3685

CM 3675

CM 3665

CM 3660

CM 3655

CM 3650

CM 4085

CM 3055

CPE 135A

CPE 135A-PS

MF 1032

35 - 3735 - 3735 - 3735 - 3735 - 3735 - 3735 - 3735 - 3739 - 4129 - 3135 - 3735 - 3731 - 33

60 - 75 85 - 95 80 - 90 70 - 80 60 - 70 55 - 65 50 - 60 45 - 55 80 - 100 50 - 60 80 - 100 80 - 100 50 - 60

≤ 60≤ 60≤ 60≤ 55≤ 55≤ 55≤ 55≤ 55≤ 55≤ 65≤ 60≤ 60≤ 65

Wire and cable, hoses Rubber compounding Rubber compounding Wire and cable, hoses Wire and cable, hoses, clean surface, high extruding speedWire and cable, hoses, clean surface, high extruding speed Cable jacketingCable jacketingHigh level flame and oil resistanceSuitable for magnetic materialsPVC impact modifierPVC impact modifier, higher plastification speed Impact modifier for ABS and PU

Mooney Viscosity ML (1+4) 125°C

Chlorine Content (%)

Shore A Typical application

Grade

Grade

Product

Product

Product

10

CSM – Chlorosulfonated Polyethylene

CSM 20

CSM 30

CSM 40

CSM 40

CSM 4085

CSM 45

CSM 6525

33043305

22-31

35-4541-5051-60

85-95

32-4283-97

29 ± 2%

43 ± 2%35 ± 2%35 ± 2%

36 ± 2%

23,5 ± 1,5%27 ± 2%

Adhesives, tapes, soft coatings, natural rubber modification

Adhesives, hard coatings, pipelines, anticorrosion liningAutomotive hoses, rubber seals, wire and cable Automotive hoses, rubber seals, wire and cable rubber compounds, rubber rollers

High perform. automot. hoses, oil seal products, special tapes

Magnetic rubber, radiation shield, high rigidity products Automobile accesories, drive belts, pump & hidraulic hoses

Mooney Viscosity ML (1+4) 100°C

Type Chlorine content

Typical application

Bisphenol-Curable Dipolymers

Tecnoflon® N 215/U

Tecnoflon® N 535

Tecnoflon® N 935

Tecnoflon® NH

Tecnoflon® FOR 210

Tecnoflon® FOR 421/U

Tecnoflon® FOR 432

Tecnoflon® FOR 4353

Tecnoflon® FOR 531

Tecnoflon® FOR 5312K

Tecnoflon® FOR 532


Tecnoflon® FOR 5351/U

Tecnoflon® FOR 539

Tecnoflon® FOR 60K/U

Tecnoflon® FOR 610

Tecnoflon® FOR 65BI


Fluorine

Content (%)

Mooney

Viscosity, ML (1+10) 121°C

TR10 (°C) Description

666666666666666666666666666666666666

1027621241024192046424524242131

3738

-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17

Base polymerBase polymer, FDA compliantBase polymer, FDA compliantBase polymer, FDA compliantCure incorporatedCure incorporatedCure incorporatedCure incorporated, FDA compliantCure incorporatedCure incorporated, metal adhesionCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporated, FDA compliant

FKM – Fluorocarbon Rubber

Product

Product

11

Bisphenol-Curable Dipolymers, HS Grades

Bisphenol-Curable Low-Temperature Terpolymers

Bisphenol-Curable Terpolymers

Peroxide-Curable

Tecnoflon® N 90HS

Tecnoflon® FOR 501HS




Tecnoflon® T 636/L


Tecnoflon® FOR 6363A

Tecnoflon® FOR TF636

Tecnoflon® TN 50A

Tecnoflon® TN



Tecnoflon® FOR 7380K


Tecnoflon® P 457

Tecnoflon® P 757

Tecnoflon® P 459

Tecnoflon® P 959

Fluorine

Content (%)

Fluorine

Content (%)

Fluorine

Content (%)

Fluorine

Content (%)

Mooney


Mooney


Mooney


Mooney


TR10 (°C)

TR10 (°C)

TR10 (°C)

TR10 (°C)

Description

Description

Description

Description

6666666666

6666

65,566

686870

68,568

68,5

67677070

4523234038

22213031

236749213250

21452448

-17-17-17-17-17

-19-19-19-19

-14-14-7-13-14-13

-15-15-5-5

Base polymer, FDA compliantCure incorporatedCure incorporatedCure incorporatedCure incorporated

Base polymerCure incorporatedCure incorporatedCure incorporated

Base polymerBase polymer, FDA compliantCure incorporatedCure incorporatedCure incorporated, metal adhesionCure incorporated

FDA compliantFDA compliantFDA compliantFDA compliant

Based on an innovative polymerization technology that allows curing without Ca(OH)2. Benefits include enhanched scorch safety, improved mechanical properties, lower compression set and shorter post-cure time.

Due to the specific monomer composition, these grades show improved cold-temperature flexibility compared to bisphenol terpolymers and dipolymers

Product

Product

Product

Product

12

Peroxide-Curable Low-Temperature

Peroxide-Curable Extreme Low-Temperature

Specialty Grades

Tecnoflon® PL 458

Tecnoflon® PL 958

Tecnoflon® PL 557

Tecnoflon® PL 455

Tecnoflon® PL 855

Tecnoflon® VPL 55540

Tecnoflon® VPL 85540

Tecnoflon® TN Latex

Tecnoflon® NM Powder

Tecnoflon® FPA1

Tecnoflon® M1

Tecnoflon® M2

Fluorine

Content (%)

Fluorine

Content (%)

Mooney


Mooney


TR10 (°C)

TR10 (°C)

Description

6666

65,56464

6565

2953351954

2545

-24-24-29-30-30

-40-40

Water-based FKM Terpolymer emulsion (70 % solids), alternative to solvent-based fluoro-elastomer coatingsFKM Copolymer used as processing aid for polyolefinsFluorinated processing aid for rubber, improves flowabilityCurative (Bisphenol AF crosslinker)Curative (Phospohonium salt accelerator)

Carbon Blacks

Reinforcing Grades

VULCAN 10HD

VULCAN 9

VULCAN 9H

VULCAN 6

VULCAN 7H

REGAL 300

VULCAN 3

VULCAN M

VULCAN 3H

VULCAN J

VULCAN 1345

VULCAN 1391

STSA (m²/mg)

Type Iodine

(mg/g)

Specific Surface Structure

N134N115/SAFN121N220/SAFN234N326/HAF-LSN330/HAFN339N347/HAF-HSN375n.a.n.a.

1291231141041137876878291122157

1421601211211208282909090124202

979611198101688810097969499

10111313211412572102120124114110134

132123119115124111104110104115128145

crushed OAN (ml/100g)

OAN

(ml/100g)

Tint strength % ITRB

Product

Product

Product

Product

13

Semi Reinforcing Grades

STERLING SO-1

STERLING SO

STERLING V

STERLING 105

STERLING VH

REGAL SRF

SPHERON 4000

STSA

(m²/mg)

Type ASTM-D1765

Iodine (mg/g)


N539/FEF-LSN550/FEFN660/GPFN683/APFN650/GPF-HSN772/SRF-LM-NS

39403636353129

43433635363032

82847387825748

111121901331226552

58596055565754

crushed OAN (ml/100g)

OAN (ml/100g)


Conductive Grades

VULCAN P

VULCAN XC-72

BLACK PEARLS 2000

STSA

(m²/mg)

Type ASTM-D1765

Iodine (mg/g)


N294/SCFN472/ECFn.a.

96127

1500

172253n.a.

97120n.a.

116174330

10487

164

crushed DBP (ml/100g)

DBP (ml/100g)


Class A Grades

Low PAH Grades

SPHERON 6400A

SPHERON 6000A

SPHERON 5000A

SPHERON SO-1A

SPHERON SOA

SPHERON SO-LP

SPHERON 4000-LP

VULCAN 6-LP

STSA

(m²/mg)

Benzo(a)- pyrene

(max value)

Type ASTM-D1765

Type ASTM-D1765

Iodine (mg/g)


PAH content* (ppm)

n.a.n.a.n.a.N539/FEF-LSN550/FEF

N550/FEFn.a.N220/SAF

1821273840

111

1620274343

7170808284

111

9592120111121

202020

3437455760

crushed DBP (ml/100g)

For each of 8 PAH included in EU list (max value)

DBP (ml/100g)

For sum of 18 PAH included in GS Mark list (max value)


* Cabot internal test method requires 48 hours toluene extraction (Soxhlet)* STSA, Iodine and OAN is the same as for normal carbon black grades without low PAH

Product

Product

Product

Product

14

Endure Series

Benefits & ApplicationsGradeProduct

Enhanced balance in hysteresis and reinforcementFor applications & needs, calling for a lower hysteresis and heat built up e.g.:Low RR long haul conveyor belts, less energy consumptionRubber Tracks; reduce heat built up induced part life failures (‚blow outs‘)

Enhanced Abrasion, Tear and Chip, Cut & Chunk Resistance For applications, benefitting from better wear Resistance for longer part life e.g.: Mining Mill Liners Top Cover of High Wear Resistant Conveyor BeltsTread of Rubber Tracks

Endure E45 CBEndure E43 CBEndure E37 CBEndure E33 CBEndure E23 CBEndure D53 CB

Endure D63 CB

E Series CB

D Series CB

Blowing Agents

Cellcom

CAP/264

Cellcom H

Cellcom OBSH

Cellcom OBSH/ASA2

Cellcom EPOB/75

Cellcom AC 7000

Cellcom EP7F/75

Type Description Decomposition Temp.

Gas volume

Micro-Capsules

TSH

OBSH pwd

OBSH pwd dustfree

OBSH polymer-bound granules

ADC pwd

ADC polymer-bound granules

high pressurized gases (e.g. butene), enclosed in polymeric shells

p-Toluenesulfonylhydrazide

P,P‘-Oxybis Benzene Sulfonyl Hydrazide

P,P‘-Oxybis Benzene Sulfonyl Hydrazide

p,p‘-Oxybis (benzenesulfo-nylhydrazide) with EPDM

Azodicarbonamide

Azodicarbonamide with EPDM

115-185°C

148-154°C

158-164°C

158-164°C

158-164°C

196-205°C

198-205°C

120-130 ml/g

125-140 ml/g

125-140 ml/g

90-105 ml/g

240-300 ml/g

200-220 ml/g

Suitable for most polymers. Shell residue may suffer the pureness of the blown product

Elastomer foaming for high hygienic (medical) purposes: NR, SBR, IIR, CR, EPDM, EVA.

Fine foam structure, no odoir, no colouring. Applicable for food and medical products. PVC, EVA, EPDM, CR, NR, SBR, NBR, NBR/PVC, PE-LD, PU

Chemical blowing agent, available in various types. Any PVC, HD-PE, LD-PE, PP, PS, HI-PS, EVA, ABS, PPO, TPE and various elastomers basing on EPDM, CR

Application DetailsProduct

15

Flow Improver

Processing Aids

MA-F44

MA-F50

MA-F60

MA-F60T

MA-F70S

Pastille colour Extra benefits besides of major function

Reacted blend of fatty acid derivatives

Zinc soaps of unsatu-rated, high molecular weight fatty acids

Blend of zinc soaps of high molecular weight fatty acids

Structure of fatty acid soaps and amides

Blend of zinc soaps of unsaturated, high molecular weight fatty acids

pale yellow

beige

yellowish

beige

beige

For high mineral/silica filled NR and synthetic rubbers. Cell structure improver for EVA foams

Very effective for physical NR and synthetic rubber peptisation, enhan-ces carbon black dispersion

Dedicated for low temperature mixing, improves NR physical peptisation

Improves NR physical peptisation, enhances calandering and extrusion, provides smooth surface and higher tear strength

Very effective for white fillers, especially for high loaded Silica com-pounds, prevents blooming

Product Description

Lubricants

MA-L16

MA-L20

MA-L22

MA-L25

MA-L33

MA-L42

MA-L48

MA-L79

Pastille colour Extra benefits besides of major function

Structure of fatty acid soaps and amides

Fatty acid ester derivative

High molecular weight, aliphatic fatty acid ester

Fatty acid ester derivative

Structure of high mole-cular weight esters and fatty acid soaps

Blend of fatty acid derivative

Blend of esters and metal soaps of natural fatty acids

Fatty Acid Ester and Polymer

pale beige

white

white

white

beige

beige/white

beige/white

white

For practically all elastomers, reduces sticking on metal surfaces, enhan-ces injection moulding

General purpose, works with most fillers and cureatives. Enhances mould release

High temperature capable, very effective in polar polymers. Improves filler incorporation

General purpose, works with most fillers and cureatives. Improves mould filling

Prevents filler agglomeration in high filled compounds. Improves filler incorporation in open and closed mixing systems

Special recommendation for EPM and EPDM. Enhances mould flow

Highly effective for specialty Polymers. Particular suitable to improve flow and release of ECO compounds. It also workes very well to improve extrusion of NBR/PVC blend compounds

has excellent lubricating properties, which leads to reduction of injection pressure in the moulding process and prevents scorch

Product Description

16

Polymerbound Accelerators

Sulfenamides

Thiazoles

Dithiocarbamates

Actmix CBS-80GE F140

Actmix DCBS-80GE F140

Actmix TBBS-80GE F140

Actmix MBTS-75GE F140

Actmix ZMBT-80GE F140

Actmix ZBEC-70GE F100

Active Ingredient

Active Ingredient

Active Ingredient

Active Ingredient

Active Ingredient

Carrier

Carrier

Carrier

Carrier

Carrier

Content (% m/m)

Content (% m/m)

Content (% m/m)

Content (% m/m)

Content (% m/m)

N-cyclohexyl-2 benzothiazole sulphenamideN,N-Dicyclohexyl-2-benzothiazolesulphenamide N-tert butyl-2-benzothiazyl-sulphenamide

Dibenzothiazyldisulphide Zinc salt of 2-mercaptobenzothiazole

Zinc dibenzyldithiocarbamate

EPDM / EVAEPDM / EVAEPDM / EVA

EPDM / EVAEPDM / EVA

EPDM / EVA

808080

7580

70

GranulesGranulesGranules

GranulesGranules

Granules

Appearance

Appearance

Appearance

Appearance

Appearance

Thiurams

Guanidines

Actmix TBzTD-75GE F140

Actmix DPTT-75GE F140

Actmix DPG-80GE F140

Tetrabenzylthiuram disulphideDipentamethylene thiuram tetrasulphide

Diphenylguanidine


EPDM / EVA

7575

80

GranulesGranules

Granules

Product

Product

Product

Product

Product

Product Description

Polybutenes

INDOPOL Clear and bright viscous liquid synthetic hydrocarbon polymer (molecular weights between 180 - 6000) made by polymerization of Isobutene + N-Butene

17

Actmix CTP-80GE F500

Actmix Retarder E-80GE F200

Cyclohexylthiophthalimide N-Phenyl-N-(trichloromethylsulfenyl)-benzene sulfonamide


8080

GranulesGranules

Actmix S-80GE F120

Actmix S-80GS

Actmix S-80GN F140

Actmix IS60-75GE

Sulphur Sulphur Sulphur Insoluble Sulfur

EPDM / EVASBRNBREPDM / EVA

80808075

GranulesGranulesGranulesGranules

Active Ingredient

Active Ingredient

Active Ingredient

Active Ingredient

Active Ingredient

Carrier

Carrier

Carrier

Carrier

Carrier

Content (% m/m)

Content (% m/m)

Content (% m/m)

Content (% m/m)

Content (% m/m)

Appearance

Appearance

Appearance

Appearance

Appearance

Special accelerators

Thioureas

Actmix ZDTP-50GE F500

Actmix ZBPD-50GE F140

Actmix ETU-80GE F140

Zinc dialkyldithiophosphate Zinc o,o-dibutyl dithiophosphate

N-N‘-Ethylenethiourea


EPDM / EVA

5050

70

GranulesGranules

Granules

Vulcanizing agents

Metal Oxide

Scorching retarders

Actmix MgO 75GE F140 Magnesium oxide EPDM / EVA75 Granules

Acid Value mgKOH/g

Saponification Value mgKOH/g

Lodine Value mgKOH/g

TITRE °C Properties

Stearic Acid

Palmera B1805 Flakes

200-210 202-212 5 Max 53-59 Rubber Grade

Product

Product

Product

Product

Product

Product

18

Liquids

Active

Batch-Off-Release Agents

Alkon 6460

Alkon 7310

Alkon 7315

26%28%

-

Easy dispersed in water Uniform coatings on rubber compoundsSupperior release propertiesCustomized formulations available

Dispersions

Powders

Active

Active

Polycoat RLS-40

Polycoat LCD

Alkon 9520

Alkon 9420

Alkon 9195L

Alkon 9310AA

31,5-35,3%

36,2%

100%

Is a stable high solids slurry for a wide range of synthetic rubber. It is environmentally friendly and contains no zinc, alpha quartz or SARA reportable compounds. Compatible with SASCO Automated Slurry System

Is an effective anti-tack coating on some of the toughest polymers and environmentally friendly

Easy dispersed in waterUniform coatings on rubber compoundsMinimum foaming or sedimentationExcellent release propertiesVery strong and rigid coating

Antioxidants

Active Ingredient Meltin Point, onset (°C) Appearance

IPPD

6PPD

TMQ

N-isopropyl-N‘-phenyl-p-phenylendiamineN-(1,3-dimethyl-butyl)-N‘- phenyl-p-phenylendiaminepolymeric 2,2,4-trimethyl-1,2-dihydrochinoline

755080

dark granulesdark granulesamber coloured granules

Description

Description

Description

Product

Product

Product

Product

19

Accelerators / Pure substancesSulfenamides

Active Ingredient Colour Appearance

CBS

TBBS

DCBS

TBSI

N-cyclohexyl-2 benzothiazole sulphenamideN-tert-butyl-2-benzothiazyl sulfenamideN,N-dicyclohexyl-2-benzothiazole sulphenamideN-t-butyl-di-(2-benzothiazole) sulfenimide

off-white/greyishoff-white/greyishlight browngrayish/white

granules/oil coated powdergranules/oil coated powdergranules/oil coated powderoil coated powder

Dithiocarbamates

Guanidines

Dithiophosphate

Thiazoles

Active Ingredient

Active Ingredient

Active Ingredient

Active Ingredient

Colour

Colour

Colour

Colour

Appearance

Appearance

Appearance

Appearance

ZBEC

ZDBC

ZDEC

TDEC

DPG

ZDTP

MBT

MBTS

ZMBT

Zinc dibenzyldithiocarbamateZinc dibutyl dithiocarbamateZinc diethyl dithiocarbamateTellurium diethyldithiocarbamate

Diphenylguanidine

Zinc dialkyl dithiophosphate

2-MercaptobenzothiazoleDibenzothiazyldisulphideZinc salt of 2-mercaptobenzothiazole

whitewhitewhiteorange and yellow

off-white / greyish

yellowish

light yellowyellowlight yellow

granules/oil coated powdergranules/oil coated powdergranules/oil coated powdergranules/oil coated powder

granules/oil coated powder

vicous liquid

granules/oil coated powdergranules/oil coated powdergranules/oil coated powder

Thioureas

Thiurams

Active Ingredient

Active Ingredient

Colour

Colour

Appearance

Appearance

ETU

TBzTD

TiBTD

TMTM

N-N‘-Ethylenethiourea

Tetrabenzylthiuram disulphideTetraisobutylthiuram disulphideTetramethylthiuram monosulphide

white

whitewhiteyellow

granules/oil coated powder

granules/oil coated powdergranules/oil coated powdergranules/oil coated powder

Product

Product

Product

Product

Product

Product

Product

20

Chemical composition Concentration Consistency

Co-Agents

Biesterfeld TAC 70E Triallylcyanurat 70 % Dry liquid

Silicone Rubber HCR Bases

Biesterfeld TAC

Silicone Rubber

ApplicationsMain featuresProduct

Product

XIAMETER®RBB 2100 serie

XIAMETER® 2008 serie






XIAMETER®RBB 2150/70

Moulding, extrusion, calendering Any type of applications




Moulding, extrusion, calendering Any type of applicationsSealing, gasketing

Cables extrusion

Moulding, extrusion, calendering Any type of applicationsExtrusion, calendering Any type of applications

General Purpose Grades 20-80 Shore ATranslucent Food statusGeneral Purpose Grades 30 + 50 + 70 Shore ATranslucent Food status High Tear Resistance30-70 Shore ATranslucentFood statusVery High Tear Resistance55-70 Shore AFood statusNon Post Cure Grades 40-80 Shore ALow Compression SetFood statusWire and Cable Grades40-50 Shore ALow Temperature Grades 40-50 Shore AHigh Green Strength70 Shore A

21

Silicone Rubber HCR Compounds and FSR Compounds


SEMSIL HCR

SEMSIL FSR

Moulding, extrusion, calendering Any type of applications“


Full customisation of the compounds according to customers needs:

mechanical properties food applicationsflame retardancycolorpreforming/packagingcuring system: peroxide or platinum

Full customisation of the compounds according to customers needs:

mechanical properties food applicationsflame retardancycolorpreforming/packagingcuring system: peroxide or platinum

Silicone Rubber LSR


XIAMETER®RBL 9200 serie


XIAMETER®RBL 920X serie


DOWSIL®QP1 & QP2

DOWSIL®C6


XIAMETER®RBL 1551-55 P

SILASTIC®590

XIAMETER®RBL 1523-30

NPC 9300-xx

MouldingAny type of applications

MouldingAny type of applicationsgasketing/sealing

Moulding weatherpack/connector seals

Moulding Engine gasketMouldingMedical applicationsMouldingMedical applications

Coating SleevingMouldingHigh Voltage InsulatorsMouldingSleevingMoulding Electrical applicationsFood and Infant Care Applications

General Purpose Grades20-70 Shore ATranslucent Food statusGeneral Purpose GradesLow compression set20-75 Shore ATranslucent Food statusOil Bleeding20-50 Shore A1 to 6 % oil contentOil Resistant50-70 Shore A20 -75 Shore AUSP Class VI30-70 Shore AUSP Class VISkin contactCoating/Sleeving Grade

High Voltage

Flame Resistance

Electrical Conductive Grade

Non Post Cure LSR

22

Silicone Rubber FSR Bases


LS 2840

LS 2860

LS 5 2040

LS 5 2060

LS 5-8740

LS 5-8760

LS 5-8720

LS 4-9040

LS 4-9060

LS 4-9080

LS-2940

LS-2970

LS-4940

LS-4960

Moulding ,extrusion, calendering Oil and fuel resistance applications










Moulding applications Orings, diaphragms

Moulding applications Orings, diaphragms

Designed for Turbocharger applications calendering and extrusion

Designed for Turbocharger applications calendering and extrusion

Standard Grade 40 Shore A

Standard Grade 60 Shore A

High mechanical properties 40 Shore A




Low modulus 20 Shore A

Low compression set 40 Shore A



High Resilience/Rebound Very low compression set NPC Excellent Solvent / Fluid Resistance

High Resilience/Rebound Very low compression set NPC Excellent Solvent / Fluid Resistance

High heat stability up to 250ºC Good acid gas resistance High Tear strength Low compression set

High heat stability up to 250ºC Good acid gas resistance High Tear strength Low compression set

23

Silicone Rubber F-LSR

Silicone RTV

Applications

Applications

Main features

Main features

Product

Product

Silastic® FL 30-9201 LSR




Silastic® FL 45-9001 F-LSR

Silastic® FL 65-9001 F-LSR

XIAMETER®RTV-3081 Curing Agent

XIAMETER®RTV-3081-R Curing Agent

XIAMETER®RTV-3081-F Curing Agent

XIAMETER®RTV-3081-VF Curing Agent

XIAMETER®RTV-3481 Base


XIAMETER®RTV-3483 Curing Agent








XIAMETER®RTV-4136-M kit

XIAMETER®RTV-4131-P1 kit

XIAMETER®RTV-4250-S kit

XIAMETER®RTV-4251-S2 kit

XIAMETER®RTV-4232-T2 kit

XIAMETER®RTV-4260-V kit

XIAMETER®RTV-4234-T4 kit

Moulding Oil and fuel resistance applications






Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking

30 Shore A Fully (100 %) fluorinated Excellent resistance to fuels and oils Retain elasticity at low temperatures (Tg ~ -68°C)




45 Shore A Partialy (40 %) fluorinated Good resistance to fuels and oils

65 Shore A Partialy (40 %) fluorinated Good resistance to fuels and oils

Curing Agent condensation cureCuring Agent condensation cureCuring Agent condensation cureCuring Agent condensation cureBase condensation cureBase condensation cureCuring Agent condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureKit addition cure Kit addition cure Kit addition cure Kit addition cure Kit addition cure Kit addition cure Kit addition cure

24

Flame Retardants, Heat Stabilizer, Processing Aids

Silicone Rubber Color Masterbatches

Main features Supplier

Main features

Product

Product

TEGOSIL® Heatban 100




TEGOSIL® FR 1000

TEGOSIL® HT 2000

TEGOSIL® HT 2100

XIAMETER®RBM-9000

XIAMETER®RBM-9001

XIAMETER®RBM-9002

XIAMETER®RBM-9003

XIAMETER®RBM-9004

XIAMETER®RBM-9005

XIAMETER®RBM-9006

XIAMETER®RBM-9007

XIAMETER®RBM-9008

XIAMETER®RBM-9010

XIAMETER®RBM-2600

HCR

LSR

Increase heat stabilityIncrease heat stabilityIncrease heat stabilityIncrease heat stability LSR Flame retardantHeat transferHeat transferFlame retardantanticreping agentIncrease heat stabilityIncrease green strengthIncrease green strengthFlame retardantFlame retardantImprove filler loadingAcidic by products neutralizerMold releaseAnti blooming Agent

EVONIK

DOW

Pigments dispersion in silicone polymer for solid silicone, HTV-HCR Pigments dispersion in fluids and resins for liquid silicone, LSR-RTV

Silicone Rubber Additives

25

Imprint Published by: Biesterfeld Performance Rubber GmbH

HamburgFerdinandstraße 4120095 HamburgGermanyPhone: +49 40 32008-0Fax: +49 40 32008-442

www.biesterfeld.com

Registered Office: Hamburg, Commercial Register: Hamburg, HRB 8492, VAT ID DE811186167Managing Directors: Sascha Hennig, Carsten Harms

Our raw material information, data and graphics was obtained from the records of our raw material suppliers.Local availability of products might differ from country to country.

Disclaimer:We shall not be liable for the suitability of the goods for the purpose intended by Customer, unless the achievement of a certain outcome of the utilisation was expressly incorporated into the contract. Our advice, information or recommendations regarding application shall be provided to the best of our knowledge. As the actual application is beyond our scope of influence, and as the circumstances of such application are not completely foreseeable, written and verbal indications, suggestions etc. can only be provided on a non-binding basis. They shall in particular not release Customer from the obligation to examine our products and goods for their suitability with regard to the intended processes and purposes.

26

Notes

27

Notes

Biesterfeld Performance Rubber GmbH Ferdinandstrasse 41 20095 HamburgGermany Phone: +49 40 32008 [email protected] S

epte

mbe

r 20

19

Documents

Performance Rubber & Additives - obs.schall-messen.de