Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED
CONFIRMED MINUTES23-OCT-2018
PITTSBURGH, PENNSYLVANIA
These minutes are not final until confirmed by the Committee in writing or by vote at a subsequent meeting. Information herein does not constitute a communication or recommendation from the Committee and shall not be considered as such by any agency.
TUESDAY, 23-OCT-2018
1.0 OPENING COMMENTS – OPEN/CLOSED
1.1 Call to Order / Quorum Check – OPEN/CLOSED
The Supplier Support Committee (SSC) was called to order at 5:00 p.m., by Jonathan Hebben, SSC Chairperson
A quorum was established with the following representatives in attendance:
Supplier Support Committee Leadership Team Members Present
NAME COMPANY NAME
Dale Harmon Cincinnati Thermal Spray Past Chair AdvisorJonathan Hebben Avcorp Composite Fabrication ChairRonald Hendriks Chemetall GmbHLisa Jensen-Donahoe Arconic Co-Vice ChairJeremy Needs Ultra ElectronicsSteve Payne Praxair Surface Technologies SecretaryDennis Reidy CIL Metal FinishingJeff Tomczak TechmetalsGary White Orbit Industries, Inc.
Suppliers/Guests Present
NAME COMPANY NAME
Roy Adkins Braddock MetallurgicalJames Ahlemeyer Ducommun New YorkMark Airey Robert Stuart ltdZubair Alam ExactathermHarolton AlexanderDavid Arnold Metal TechJeffrey Asselta Precision Gear Inc.Atanasio Atanasio Honeywell Aerospace - South BendAmy Azzano Azzano RexnordAndy Bakewell E M Inspection Co LtdAlban Bakia ArconicRob Balizet Canton Drop ForgeThomas Banks Hohman Plating & Manufacturing, LLC.Mike Barsoski Orion IndustriesJennifer Bendle Specialty Steel Treating, Inc.Paul Binford Orion IndustriesKara Bjorkman Hixson Metal FinishingAmy Blanes SOLAR ATMOSPHERES OF CAMichelle Bodnar Dupont
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED
Matthew Boldman PAS TechnologiesDavid Bonito Technical Manufacturing CorporationSteven Booker DuPontLorie Bouke Skills Inc.James Brinker Magnetic Inspection LaboratoryGeorge Bufkin DAVRO Inc. Graham Buswell SPS Aerostructures LtdAnthony Calabrese Technical Manufacturing CorporationRachell Cameron BRADDOCK METALLURGICALMichael Cauchy Arconic Engine SystemsAlex Chavez Cassavant Assembly and Processing,
LLC.Darryl Clark Crestview AerospacePatrick Collins Honeywell Aerospace - South BendFrancisco Contreras Gastelum Ellison Surface Technologies MexicoKennia Corona Brazonics Inc.Joshua Crockett Ellison Surface TechnologiesSean Crossley Magnetic Inspection Laboratory IncJason Crutchley Lear Romec div of Crane CoNatalie Cullen Kreisler ManufacturingGeorge Dean Fountain Plating CoJames Dowd REL Inc. Iain Duncan RFC AerospaceKurt Enderle Aircraft X-Ray Lab IncEdward Engelhard Solar Atmospheres Inc.Bob Ferry FPM HEAT TREATINGTJ Fitzmaurice TSI TitaniumAaron Fitzsimmons Advanced Technical CeramicsNathanial Flynn Carpenter TechnologyJames Fontalvo Norral Inc.Kenneth Forest Nor-Ral Inc.Holly Frampton Skills IncAvary Fresella Vaupell CompositesTony Garcia Blanchard Metals ProcessingCindy Godfrey National PeeningLisa Golden Metallurgical Processing IncAdam Gorczewski Oerlikon BalzersBruce Gormley SolvayRob Guido Conax TechnologiesCynthia Hagan NSL Analytical Serices IncNicholas Hallick Strite Precision Machining LimitedHiro Hamada Toyotanko Co. Ltd.Mark Hammond Aavid ThermacoreNancy Henchey B&E PRECISION AIRCRAFT
COMPONENTS/ NEW ENGLAND HEAT TREATING SERVICES
Marty Hendricks Ellison Surface TechnologiesElizabeth Herman Kaman Composites-Vermont, Inc.Lisa Heyl Lynn Welding Company, Inc.Mary Jane Hornung Cobham Mission SystemsDrew Huisman Magnetic Inspection Laboratory (MIL INC)Elsa Hurtado Russell Plastics Technology Co IncRossana Iannacone MW.FEP S.p.A.James Jensen Moeller Mfg. Company, LLCDouglas Johnson Applied Thermal Technologies, Inc.George W. Johnson Silvex, Inc.Kyle Johnson Silvex Inc.
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED
David Jordan ChemetallChristopher Joy Orbit Industries, Inc.Goktug Kara TEI-TUSAS ENGINE INDUSTRIES INC.Viktoria Kravchenko Wesco AircraftKris Krishnamoorthy Applus RTD CanadaJohn Kunkle Arconic - HowmetShelly Lawless Meyer ToolMike Liccketto CDM Electronics Inc.Johanna Lisa Continental Heat Treating, Inc. Quality
Heat Treating, Inc.Rich Madsen Blanchard Metals ProcessingCeline Maquiaba BodycoteGiulio Massarutto MW.FEP spaPatrick McCarthy Canton Drop ForgeChristopher Mesker PCC Strucuturals, Inc.Abdul Nathani Hi-Tech Metal FinishingKen Nelson Continental Heat TreatingSharon Norton Atlas Testing LaboratoriesRodney Nuttall Calumet Electronics CorporationMauro Orlandi Magellan Aerospace MississaugaLisa Osborn Quality Plating Co. of TulsaDavid Osenar PAKO, Inc.Kurt Pachaud The Lighthouse for the BlindRozalia Papp Airgas / Air LiquideTimothy Paradise Metallurgical Processing IncJeremie Parent Technologies de Surface Ellison CanadaJuan Perez Aircraft X-Ray Lab IncDulce Petry (Sanchez) Hi-Tech Metal FinishingMatt Pleskacz SolvaySophia Polosky Kreisler Industrial CorporationG.R. Porterfield III Solar Atmospheres, Inc.RoseMary Puhr PPGChris Reed DucommunRobert Rich SPS TechnologiesElena Ritoli Metallurgical Processing IncAnthony Rizzo Hercules Heat Treating CorpBeth Robison Ducommun, Inc.Ben Rupp KaydonKevin Ryan 3M CompanyFrank Saenz Hi-Tech Metal FinishingDavid Satlawa Fountain Plating CoThomas Schaefer Cincinnati Thermal Spray-EastJohn Schmitt ATI Forged ProductsTammi Schubert Helicomb Intl. Inc. PCCNicholas Schumacher Hohman Plating and Mfg., LLCPascal Seguin Hutchinson Aerospace & IndustryDoug Shuler PyroConsulting Steve Simacek Esterline - Hytek FinishesMark Soderstrom Arconic EnginesJohn Spade Mistras Arizona Inspection IncAl Stanco Click BondRonald Stewart Ellison Surface TechnologiesLee Swanson TTM Technologies
Vern TalmadgeArconic Power & Propulsion Howmet Thermatech Coatings
Dave Thompson DCI Aerotech Div of Detroit Chrome Inc.Junji Tsuji IHI Corporation
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED
Connor Tulloch Strite Precision Machining LimitedSteve Urquizo Cassavant Assembly & Processing, LLC.Mark Soderstrom Arconic EnginesChris Urtnowski Valence Surface Technology (Coast
Plating Inc.)Israel Vasquez Linear MotionKevin Vaughan DuPontTino Volpe Senior Aerospace Metal BellowsGoran Vucinic Ruag AerostructuresKara Warrensford ArconicJames Webb Standardaero Component ServicesWilfried Weber PFW Aerospace GmbHLani Williams Danville Metal Stamping, Inc.Jack Winteringham ArconicNathan Wright C3 DataRob Yocom Imagineering Finishing TechnologiesBlanca Zilli-Huerta Bowman Plating Company, Inc
Subscriber Members/Participants Present
NAME COMPANY NAME
Richard Blyth Rolls-RoyceRusty Freelen Lockheed Martin CorporationSteve McCool Honeywell Aerospace
PRI Staff Present
Connie HessScott KlavonCrystal KurtykaRobert LizewskiJoseph PintoCynthia NixonLouise StefanakisMichele Stefanchik
1.2 Safety Information / Introductions / Routing of Attendance List / Code of Ethics
Safety information was reviewed.
o Reviewed fire exits in the meeting roomo Inform PRI Staff of any emergencies
Jonathan Hebben, SSC Chairperson, introduced the SSC Leadership Team (LT), SSC Sub-Team Leads, Task Group Representatives, and first-time attendees introduced themselves.
Routing of the Attendance List - Completed
The Code of Ethics and Anti-Trust & Conflict of Interest (pg. 7 Attendees Guide) were reviewed by Jonathan Hebben, SSC Chairperson. The SSC viewed the PRI anti-trust video.
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED
1.3 AGENDA / Rules of Engagement
Jonathan Hebben, SSC Chairperson, reviewed the Agenda and the SSC Rules of Engagement
1.4 MINUTES
Motion made by Dale Harmon and seconded by Dennis Reidy to approve the 19-JUN-2018 meeting minutes as written.
2.0 SSC MEMBERSHIP CHANGES / AWARDS
The following changes have been made in consultation with Richard Blyth, NMC Chair, and will take effect after report-out at Steering.
Gary White will become the SSC Co-Vice ChairJeremy Needs will become the SSC Co-Vice ChairGary White will replace Lisa Jensen-Donahoe as the Mentoring Sub-team LeadShelly Lawless will replace Gary White as the TG Rep Sub-team Lead
The following changes will be made after Task Group approval and report-out at Steering.
Ken Nelson is the TG Rep for the AQS Task GroupGerardo Montano is the TG Rep for the Seals Task Group
The following individuals were recognized for their contributions to the SSC:
Dale Harmon as the Past ChairLisa Jensen-Donahoe as the Co-Vice Chair and Mentoring Sub-team LeadArno Toelkes as the European Supplier Rep and Survey Sub-team Lead
3.0 NMC CHAIR ADDRESS
Richard Blyth, NMC Chair, addressed the SSC General Meeting attendees.
4.0 PROPRIETARY INFORMATION PRESENTATION
Richard Blyth presented.
Question of Self Audit checklist information vs pre-audit information uploading into eAuditNet 30 days before audit. NMC and PRI Quality Manager stated that the self-audit checklist was a ‘yes’ and pre-audit information was a ‘no’. But a supplier stated that some task groups do require pre-audit information to be uploaded in eAuditNet 30 days before the audit.
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED
ACTION ITEM: Connie Hess to get clarification regarding Task Groups who require pre-audit documentation and whether or not they can issue an NCR if the Auditee does not meet the requirement. (19-Feb-2018)
5.0 OBSERVATION PRESENTATION
Bob Lizewski presented.
6.0 SUPPLIER NEWS
Jonathan Hebben presented.
7.0 2017 SUPPLIER SURVEY REPORT OUT
Steve Payne presented.
8.0 OPEN FORUM REPORT OUT
Dale Harmon presented.
9.0 NEW BUSINESS
No new business
10.0 ADJOURNMENT – 23-OCT-2018
Motion to adjourn given by Shelly Lawless and seconded by Jeremy Needs at 6:38pm.
Minutes Prepared by: Cynthia Nixon [email protected]
SUPPLIER SUPPORT COMMITTEE (SSC) MEETINGOCTOBER 2018
CONFIRMED