Performance Editor Essential Owner’s Manual

iPadMIDI

i-MX1 or i-UX1

Performance Editor Essential MOTIF XF, MOTIF XS, S90 XS/S70 XS, MOXF6/MOXF8, MOX6/MOX8

• Copying of the commercially available music sequence data and/or digital audio files is strictlyprohibitedexceptforyourpersonaluse.

• Thesoftwareandthisowner’smanualareexclusivecopyrightsofYamahaCorporation.

• Copyingofthesoftwareorreproductionofthismanualinwholeorinpartbyanymeansisexpresslyforbiddenwithoutthewrittenconsentofthemanufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software anddocumentation and cannot be held responsible for the results of the use of this manual and thesoftware.

• Thescreendisplaysas illustrated in thisOwner’sManualare for instructionalpurposes,andmayappearsomewhatdifferentfromthescreenswhichappearonyourdevicer.

• Apple,iPadaretrademarksofAppleInc.,registeredintheU.S.andothercountries.

• ThecompanynamesandproductnamesinthisOwner’sManualarethetrademarksorregisteredtrademarksoftheirrespectivecompanies.

©2011-2013YamahaCorporation.Allrightsreserved.

ForinformationabouttheMIDIsettingsoftheMOTIFXF,MOTIFXS,S90XS/S70XS,MOXF6/MOXF8,andMOX6/MOX8refertotherespectivemanuals.

What is Performance Editor Essential?ThisapplicationletsyouedittheVOICE/ARP/EFFECT/MEQparametersinthePerformancemodeoftheMOTIFXF,MOTIFXS,S90XS/S70XS,MOXF6/MOXF8,MOX6/MOX8fromyouriPad.SelectaPerformanceontheinstrument,edittheparametersoftheselectedPerformanceontheiPad,thenstoretheeditedparametersontheinstrument.

TheinstructionsinthismanualusetheMOTIFXFasanexample.Dependingonyourparticularmusicalinstrument,theremaynotbeequivalentdisplaysorbuttons.

Utility windowForsettingtheparameterscommontoallthedisplays.

VOICE displayForassigningtheVoicestotherespectivePerformanceParts.

XY CONTROL displayLetsyoucontrolthespecifiedparameterchangeandMIDIControlChangemessagessimultaneouslybydraggingintheXYPadarea.

EFFECT display

Chorus displayReverb displayMaster Effect display

ARP display MIXING window

MEQ display

ByusingaYamahai-MX1ori-UX1,connecttheinstrumenttoaniPad.TheMOTIFXFcanbeconnectedviawirelessNetworkMIDI.FordetailsaboutwirelessMIDIconnectivity,refertothe“NewFunctionsinMOTIFXFVersion1.20”Manual.

NOTE•Beforeediting,enterthePerformancemode.•Afterediting,storetheeditedPerformance.•Youcanconnecti-MX1/i-UX1todevicesfeaturing

theLightningconnectorviaAppleLightningto30-pinAdapter.

Performance Editor Essential Owner’s Manual 2

Title bar and Utility windowThiswindowletsyousettheparameterscommontoallthedisplays. EachlampflashesaccordingtotheMIDIin/out

messages.

TappingthisopensorclosestheUtilitywindow.

Setthistothesamenumberasthatoftheinstrument.

Selectstheconnectedinstrument.

TappingthiscallsuptheOwner’sManual.

Tappinghereinitializesallthesettings.

DeterminestheconnectionmethodbetweentheiPadandMIDIinstrument.cable:Shouldbeselectedwhenconnectedviathei-MX1ori-UX1.wireless:ShouldbeselectedwhenconnectedviawirelessNetworkMIDI.NOTEWhensetto“wireless,”maketheWi-FisetupinSettings>Wi-FiinyouriPad.

Determinestheknobbehavior.rotary:Draggingaroundtheknobwillrotateitinthesamedirection.linear:Draggingverticallyupwardfromtheknobrotatestheknobclockwise,anddraggingdownwardrotatescounter-clockwise.

Titlebar

SetstheMIDITransmitChannel.

SelectstheMIDIportoftheinstrumentincaseofwirelessconnection.

AssignstheMIDIControlChangenumberstoeachcontroller.

Utility window

*What is a Template?EachoftheTemplatesincludesthesettingsofallthedisplays,meaningthatyoucancallupalltheEffectsettingsjustbyselectingthedesiredTemplate.EachoftheTemplatescanberenamed,calledupandinitialized.

Whensettoon,tapping[RECEIVE]callsupaconfirmationmessage.

DeterminestheFaderbehavior.jump:TheFaderjumpstoanytappedlocationintheFaderarea.catch:TheFaderwillbe“caught”asyoudragonit.

Whensettoon,selectingaTemplate*transmitsthecorrespondingsettingsviaMIDI.

Performance Editor Essential Owner’s Manual 3

MIXING window

AdjusttheCOMMON VOLUMEbyoperatingtheslider.Tapping[-]/[+]changesthevalueinsinglesteps.

TappingthisclosestheMIXING window.

AllowsyoutoeditthePart1parameters.Likewise,theparametersfortheParts2–4canbeeditedinthecorrespondingarea.

AdjusttheCOMMON PAN/COMMON REV SEND/COMMON CHO SENDbyoperatingtheknob,orbytappingthevaluetocallupthesliderforadjustingtheparameters.

AdjustthePART PAN/PART REV SEND/PART CHO SENDbyoperatingtheknob,orbytappingthevaluetocallupthesliderforadjustingtheparameters.

AdjustthePART VOLUMEbyoperatingtheslider.Tapping[-]/[+]changesthevalueinsinglesteps.

TurnsthePart Switchon/off.Redindicates“ON”whilegrayindicates“OFF.”ThenumbercorrespondstothePartNumber.

Performance Editor Essential Owner’s Manual 4

VOICE display

Tapping[RECEIVE]startsreceptionofthesettingsfromtheinstrument.NOTETheVoicenameontheiPadmaybedifferentfromthat of the instrument during Arpeggio playbackwith“VoicewithARP”=ONand“ChangeTiming”=ON.Toremedythissituation,tap[RECEIVE].

Tapping[TRANSMIT]startstransmissionofthecurrentsettingstotheinstrument.NOTEWhen the Voice with ARP function is set to on,tapping[TRANSMIT]willchangethecurrentVoicetotheoneassignedtothenewArpeggiotype.

ChangestheArpeggiotypeofthecurrentPart.Thisisequivalenttothe[SF1]–[SF5]buttons.

LetsyoueditthePart1parameters.Likewise,theparametersfortheParts2–4canbeeditedinthecorrespondingarea.

Template NameSelectingaTemplatecallsupallthesettingsofallthedisplays.TochangetheTemplate,tap[+]/[-],ortaptheTemplateNametocalluptheTemplatelist,thentapthedesiredTemplate.

IndicatestheArpeggiotempo.Tochangethetempo,taptheTempovaluetocallupthesliderthenoperatetheslider,ortap[TAP]threetimesatthedesiredtempo.

TurnsthePart Switchon/off.Theredcolorindicates“on”whilethegraycolorindicates“OFF.”ThenumberonthebuttonreferstothePartNumber.

DeterminestheVoice Bank.Tapping[+]/[-]changestheVoiceBank.TappingtheBankNamebetween[+]and[-]callsuptheVoiceList.

DeterminestheVoice Number.Tapping[+]/[-]changestheVoicenumber.TappingtheVoicenamebetween[+]and[-]callsuptheVoiceList.

IndicatesthePart Voice Name.TappingherecallsuptheVoiceList.

TappingherecallsuptheMIXING window.

DeterminestheNote Limit LowandNote Limit High.Tapping[-]/[+]changesthevalueinsinglesteps.TappingtheNotenamebetween[-]and[+]callsupthesliderwhichletsyousettheLimitvalue.

ShowsthenoterangespecifiedviatheNoteLimitLowandHighparameters.

TappingherealternatelycallsuptheXY CONTROL display, VOICE display, ARP display, EFFECT displayandMEQ display.

Performance Editor Essential Owner’s Manual 5

Voice ListThislistiscalledupbytappingtheVoiceBank,VoicenumberorVoicenameforeachPart.Asshownbelow,theVoiceListfeaturestwoindicationtypes:BankorderandCategoryorder.NotethatUserVoicesarenotshownintheVoiceListbyCategory.

Voice List with the Bank order Voice List with the Voice Category order

BANK and CATEGORY tabsSelectstheindicationtypeoftheVoiceListfromtwotypes:BankorderorCategoryorder.WhenaUserVoiceisselected,theCATEGORYtabisnotavailable.

Tapping[DONE]willactuallyassigntheselectedVoicetothecurrentPart,thenclosetheList.Tapping[CANCEL]willabortselectionthenclosetheList.

TapthedesiredBanktocallupthecorrespondingVoiceList,thentapthedesiredVoicename.TheVoiceListcanbescrolled.

TapthedesiredMainCategoryandSubCategorytocallupthecorrespondingVoiceList,thentapthedesiredVoicename.TheVoiceListcanbescrolled.

DraggingupwardordownwardwillscrollthroughtheVoices.

Performance Editor Essential Owner’s Manual 6

ARP display

1

2

3 4 5 6 7 8

1 Turnson/offARP Part Switch.Theredcolorindicatestheonstatuswhilethegraycolorindicatestheoffstatus.

2 Turnson/offARP Hold.Thebluecolorindicatestheonstatuswhilethegraycolorindicatestheoffstatus.

3 SetsARPHoldtoSync Off.ThebluecolorindicatestheSyncOffstatuswhilethegraycolorindicatesadifferentstatus.

4 Tappingthe[-]/[+]changestheArpeggioTypetothefirstoneofthenewMain Category.Tappingtheindicationbetween[-]and[+]callsuptheArpeggioTypeList.

5 SelectstheArpeggio Type Bankform“Pre”or“User.”TheselectedBanklamplights.

6 Tappingthe[-]/[+]changestheArpeggioTypetothefirstoneofthenewSub Category.Tappingtheindicationbetween[-]and[+]callsuptheArpeggioTypeList.

7 IndicatestheArpeggio Type Name.TappingherecallsuptheArpeggioTypeList.

8 Tappingthe[-]/[+]changestheArpeggio Type.Tappingtheindicationbetween[-]and[+]callsuptheArpeggioTypeList.

SameasintheVOICEdisplay

LetsyoueditthePart1parameters.Likewise,theparametersfortheParts2–4canbeeditedinthecorrespondingarea.

Turnson/offARP Common Switch.

SelectsARP Sync Quantize Value.

Performance Editor Essential Owner’s Manual 7

Arpeggio Type List

Tapping[DONE]actuallyassignstheselectedArpeggioTypetothecurrentPart,thenclosestheList.Tapping[CANCEL]willabortselectionthenclosetheList.

TapthedesiredBank,MainCategoryandSubCategory,thentapthedesiredArpeggioType.

DraggingupwardordownwardscrollsthroughtheArpeggioTypes.

Performance Editor Essential Owner’s Manual 8

EFFECT display

SameasintheVOICEdisplay

LetsyousettheInsertion SwitchtoonoroffforeachPart.

TappingherecallsuptheCHORUS display.

TappingherecallsuptheREVERB display.

TappingherecallsuptheMASTER EFFECT display.

Toadjusteachvalue,dragaroundtheknobortapthevaluetocallupthesliderthenoperatetheslider.

SetstheMaster Effect ON/OFF.

Performance Editor Essential Owner’s Manual 9

Reverb/Chorus/Master Effect displayFromthesedisplays,youcanmaketheEffectsettingsforthePerformancecurrentlyselectedontheinstrument.Thissectioncoverstheoperationsonthesedisplayshavingthesamedesign.

TappingherereturnsthescreentotheEFFECTdisplay.

Effect List

To select an Effect Type:Tap[+]/[-]inthisarea. OrtaptheindicatorsinthisareatocalluptheEffectlist,tapthedesiredCategory,tapthedesiredType,thentapthedesiredPresetsetting.Afterselecting,tap[Done]toclosetheEffectlist.

To edit the Effect parameter:Dragthesliderofthedesiredparameter,ortap[+]/[-].

Draggingupwardordownwardwillscrollthroughtheparameters.

Performance Editor Essential Owner’s Manual 10

MEQ display

SameasintheVOICEdisplay

ToadjusttheEQparametersforeachBand,tapthedesiredbandat1or2tocorrespondinglychangetheKnobcolor,thenoperatetheKnob,ortapthevaluetocallupthesliderforadjusting.

SelecttheshapeoftheHIGHbandfromShelving(leftside)andPeaking(rightside).

ToedittheEQsetting,dragthedotwiththecolorcorrespondingtothatofthedesiredband(LOW,LOWMID,MID,HIGHMIDorHIGH).

SelecttheshapeoftheLOWbandfromShelving(leftside)andPeaking(rightside).

Gain Frequency

Performance Editor Essential Owner’s Manual 11

XY CONTROL displayThePadareaonthisdisplayletsyousimultaneouslycontrolthefiveparametersspecifiedforCONTROL1–5.ThismeansthatyoucanfreelychangethesoundinrealtimeduringkeyboardperformancebycontrollingthePadarea.

SameasintheVOICEdisplay

SetshowtheControlParameterValueisdetermined.X:Thehorizontalvalueoftheballpositionwillbetransmittedastheparametervalue.Y:Theverticalvalueoftheballpositionwillbetransmittedastheparametervalue.

SetstheControl Parameter.Tap[+]/[-],ortaptheParameternamebetween[-]and[+]tocallupthelist,thentapthedesiredparameter.

PadResetstheballpositiontothecenterofthePad.

BallIndicatesthecurrentpositionofyourcontrol.

SetsthesensitivityoftheballinthePadarea.Movethesliderrightwardtoraisethesensitivity.

Draggingupwardordownwardwillscrollthroughtheparameters.

Parameter List

Performance Editor Essential Owner’s Manual 12

Ball position and Parameter valueMovingtheball transmitsthevaluesoftheparametersspecifiedforCONTROL1–5fromyour iPadtotheinstrument.Asshownbelow,twodifferentvaluerangesareavailable.

Y

X

+63

+63

-64

-64 ±0

Y

X

127

127

127

127 0

C.S.G.,DigitalMusicalInstrumentsDivision©2011-2013YamahaCorporation

304MW-C0

Parameter Name Descriptions

AEGAttack

ControlsthecorrespondingCommonparameter.

AEGDecay

AEGSustain

AEGRelease

FEGAttack

FEGDecay

FEGRelease

FEGDepth

Cutoff

Resonance

Pan

Assign1 ControlstheparametersettoAssign1intheUtilitywindow.

Assign2 ControlstheparametersettoAssign2intheUtilitywindow.

Parameter Name Descriptions

Volume

ControlsthecorrespondingCommonparameter.ReverbSend

ChorusSend

FootController1ControlstheparametersettoFootController1intheUtilitywindow.

FootController2ControlstheparametersettoFootController2intheUtilitywindow.

A.Function1 ControlstheparametersettoA.Function1intheUtilitywindow.

A.Function2 ControlstheparametersettoA.Function2intheUtilitywindow.

BreathControllerControlstheparametersettoBreathControllerintheUtilitywindow.

FordetailsaboutParameterChange,refertotherespectivemanualsoftheinstruments.

When the value range is -64 – +64: When the value range is 0 – 127: