2
Performance Chassis P2020 for Tamiya TA05 P2020 Advanced Performance Continuing to push the performance envelope. Shaded Images are existing parts 1 P2020 Installation: (main chassis and steering) Assembly Notes: The P2020 Chassis set re-uses many of the existing M3 screws that are included in the original TA05 kit. Direction #1 uses original M3x8 flathead screws for all locations unless otherwise indicated while Direction #2 uses M3x10 flathead screws for all locations except on the motor mount. Original TA05 screws are all indicated in grey, P2020 kit screws are shown in black. B - See back of direction book M3 Jam Nut M2.5 x 10 Brass Spacer M3 Washer M3x14 Flathead Screw M3x12 Flathead Screw M3x24 Flathead Screw M3x10 Flathead Screw B B Steering Adjustments: Note direction of draglink and ball studs.

Performance Chassis for Tamiya TA05 2020 · 2007. 5. 23. · Performance Chassis P 2020 for Tamiya TA05 manceP2020 Continuing to pu s h the p elope. Shaded Images are existing parts

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

  • Performance Chassis P

    20

    20 for Tamiya TA05

    P2020

    Advanced

    Perform

    ance

    Continui

    ng to push

    the

    performan

    ce envelop

    e.

    Shaded Images are existing parts

    1 P2020 Installation: (main chassis and steering)Assembly Notes:The P2020 Chassis set re-uses many of the existing M3 screws that are included in the original TA05 kit. Direction #1 uses original M3x8 fl athead screws for all locations unless otherwise indicated while Direction #2 uses M3x10 fl athead screws for all locations except on the motor mount. Original TA05 screws are all indicated in grey, P2020 kit screws are shown in black.

    B - See back of direction book

    M3 Jam Nut

    M2.5 x 10 Brass Spacer

    M3 Washer

    M3x14 Flathead Screw

    M3x12 Flathead Screw

    M3x24Flathead Screw

    M3x10Flathead Screw

    B

    B

    Steering Adjustments:Note direction of draglink and ball studs.

  • 2 P2020 Installation: (upper deck and optional motor guard)

    Shaded Images are existing parts

    Upper Deck Installation:#1 - Place the rear of the upperdeck through the front belt from the servo side of the TA05.#2 - Tilt the upperdeck counterclockwise while rotating the deck clockwise toward the correct orientation. This rotation should lift the center gear out of the motor mount allowing you to shift the gear into the gear slot in the upper deck.#3 - After center gear is placed into the gear slot slowly rotate the upper deck into the correct position guiding the belts at the front and rear over the deck and past the differential pulleys. (you may have to lightly stretch the belts to get the deck in place, be careful not to overstrech the belts as this action should be minmal.)

    A - Antenna Mount Installation: Optional on Upper Deck with provided M3x6 Pan Head Screw

    A

    M3 Washer

    M3 WasherM3

    Aluminum Washer

    M3x6 Panhead Screw

    ©2007 1230P N Jefferson Street Anaheim CA 92807714.630.9015 • 714.630.6250FAX • http://www.penguinrc.com

    B Battery Installation Information: P2020 Replacement PartsP2021 P2020 Main Chassis $85.99P2022 P2020/TA05 Upper Deck $43.99P2023a P2020 Steering Parts Kit $11.99P2024 P2020 Motor Mount Spacer Kit $10.99P2025 P2020 Graphite Motor Guard $11.99P2029a P2020 Standard Battery Mount Kit $12.99

    P2020 Optional PartsP2023 P2020/TA05 Steering Drag Link $6.99P2026 P2020/TA05 Front Shock Tower $16.99P2027 P2020/TA05 Rear Shock Tower $19.99P2027t1** P2020 Rear Toe Plate Kit (0˚, 1˚, 2˚) $ tbdP2027t2** P2020 Rear Toe Plate Kit (-0.5˚, 0.5˚, 1.5˚) $ tbdP2028 P2020/TA05 Front Bumper Brace $17.99P2029b P2020 Velcro™ Battery Mount Kit $12.99 ** Not Currently Available

    For further information regarding Penguin r/c products or additional information regarding the tuning of R/C vehicles please feel free to visit

    our web site at http://www.penguinrc.com or by email at [email protected].

    A - Battery Bar stand-off location for use with stock TA05 battery bar.B - Rail direction and chassis placement holes for use with LTO style battery.C - Rail direction and chassis placement holes for use with Stick style battery.

    A

    A

    BC CB

    BC CB

    B C

    Front

    M3 Jam Nut

    M3x6 Flathead Screw

    M3x9.5Aluminum Washer

    M3x6 Flathead Screw

    Existing BatteryPin Stud

    M4.5x20Aluminum Standoff

    Existing Plastic Spacer

    Battery Rail

    Chassis

    Chassis

    Battery Rail Exploded View:

    Battery Standoff Exploded View: