Upload
duongthuy
View
236
Download
0
Embed Size (px)
Citation preview
Page 1 of 13
PISCES INTERNATIONAL PLACEMENT
POEA LICENSE No: 057-LB-030708-R
MAIN OFFICE: UNIT 101 (F) 8284 Dr. A. Santos Ave., San Dionisio, Sucat Road, Parañaque City
Telephone Nos: 825-6599 / 820-0399 Cellphone Nos: 0922-821-8036 / 0922-821-8034
E-mail Address: [email protected] Website : www.piscesplacement.com
Branch Offices: CAGAYAN DE ORO : JMC Bldg., J.V. Sereña St., Carmen Cagayan de Oro City
Telephone / Cellphone No: 088-858-6765 / 0922-821-8035
CEBU :LDM Bldg., MJ Cuenco Ave., cor. Legaspi St. Cebu City
Telephone / Cellphone Nos: 032-238-3492 / 0922-821-8032
DAVAO :2/Flr. Unit 6 & 7 RC Bldg., G. de Guzman St. Davao City
Telephone / Cellphone No: 082-221-5113 / 0922-821-8033
PENDING JOB ORDERS (As of 13 JULY 2011)
TRANS TELECOMS COMPANY (Accre. # 10144965) – Riyadh, KSA
PRINCIPAL WILL CONDUCT FINAL INTERVIEW ON:
MAIN OFFICE - JULY 13-16 & 23, 2011
DAVAO Branch – 18-19 JULY 2011
CEBU Branch – 20-21 JULY 2011
PESO BACOLOD – 22 JULY 2011
ADSL TECHNICIANS (100) – must have at least three years (Local copper access network) experience with a recognized
carrier, (Previous STC experience advantageous). (The applicant will be tested on his knowledge). Willing to work in the
Kingdom of Saudi Arabia, (Previous similar verified experience in KSA advantageous, other GCC Countries are not
considered as KSA experience). Preference will be given to those applicants that have previously worked on STC project,
worked previously in KSA and have Arabic language skills. Working knowledge from MDF through cross connection points (cabinets) to protectors (DPs) and internal customer wiring. (Local copper access network – Primary & Secondary – “E” &
“D” sides). Knowledge of MSAN’s within the copper access network (Fibre fed Multiplexer cabinet). Identify fault locations
within the copper access network . Able to terminate copper cables on various termination blocks. Able to run cross
connection jumper wiring. Experience of installing and commissioning ADSL Modems in customer premises. An
understanding of Cisco routers is advantageous. Ability to read understand and implement written job requirements. An
understanding of access network drawings and plans with the ability identify various network elements. Familiar with MS
Office (Word, Excel & E mail). Familiar with any work management system. English speaking, (Arabic very advantageous).
Valid Driver's License is a required.
GSM ENGINEERS (5) – Excellent and Strong knowledge in wireless cellular Network specially GSM, UTMS and LTE
Networks. At least 2 years of experience as an Installation Engineer / Technician for rollout of RBS equipment at site.
Experience with Ericsson & Huawei rollout of other radio transmission equipment is an advantage. Strong troubleshooting
skills. WCDMA Basic principle. RNC/nodeb troubleshooting experience. Excellent communication skill. Ability to Working Well Under pressure. Strong service mind and sense of responsibility. Highly motivated, mature, professional and willing to
provide 100% performance
SDH/DWDM ENGINEERS (5) – Skilled / trained engineers with experience on SDH & DWDM Optical network installation
and commissioning. Experience in DWDM/CWDM, and SDH, technical standards and applications. Must have significant
understanding and working knowledge of Transmission Networks Fundamentals and principles, PDH, SDH, Optical, Ethernet,
IP, DWDM,WDM. Commissioning of Huawei OSN 3500,7500/Optix Series and DWDM Equipment. Should have expertise
on ring topology, cut over’s, Expansion Project, and protocols. Be familiar with Huawei NG-SDH Equipment, software
upgrade of optical Network Equipment. Strong skills and knowledge in use of computer, telecommunications products. Good
analytical ability, presentation and interpersonal skills Very good team player with colleagues, service providers and
customer. Good communication skills - written, spoken and presentation. Good knowledge in English, both written and
spoken GSM TECHNICIANS (16-20) – At least 2 years of experience as an Installation Technician for rollout of RBS ,
RNC/NodeB and Transmission equipment at site. Experience with Ericsson & Huawei rollout of other radio transmission
Page 2 of 13
equipment is an advantage. Strong troubleshooting skills. WCDMA Basic principle. Excellent communication skill. Ability to
Working Well Under Pressure. Strong service mind and sense of responsibility. Highly motivated, mature, professional and
willing to provide 100% performance.
FTTH TECHNICIANS – The ideal candidate will have worked in a similar role for at least 3 years and will have
demonstrable experience of working with fibre optic cables in a telecommunications environment. He must be able to splice
fibres using a Fusion Splicer along with a having a working knowledge of testing with an Optical Time Domain Reflectometer
(OTDR) and Power Metre Light Source. Experience of working within Copper and ADSL systems is also highly desirable.
The potential candidate will have worked in a similar capacity in an external telecommunications environment and will also
possess excellent verbal communication skills. In addition, he will possess well developed Customer Care skills.The candidate
will have a full driving license and be expected to pass a Saudi driving test very soon after arrival. He will be in good physical
health and have a highly flexible and adaptable attitude to his work.
UP SCALE CLUB & SPA - Riyadh, K.S.A.
ABSOLUTELY FREE PLACEMENT FEE
With over 20,000 square meters top quality indoor and outdoor facilities, up scale is one of the premiere clubs in the Middle East. Up Scale also offers an array of associated products and services in KSA, all
designed to improve fitness and health. FITNESS SUPERVISORS – 25-35 years of age. At least 2-3 years as fitness supervisor, plus several years working experience at a leading health club, franchise club such as Fitness First, Gold’s Gym etc. or in a 5 star hotel health club.
Physical education graduate from an established university or college with certification in fitness instruction or with fitness
industry experience as a fitness instructor of at least 5 years with leading fitness industry service providers, and with fitness
industry seminar certification to show ongoing successful fitness education. Good working knowledge of stretching, cardio
vascular (CV) machine workouts, plus machine and free weight workouts. Certification within the last year for first aid/CPR.
Pleasant manner, good spoken and written English and or Arabic. In good physical condition and appearance (overweight out
of shape candidates not accepted). Skilful in working with people of other cultures
FITNESS INSTRUCTORS – 25-35 years of age. Several years working experience at a leading health club, franchise club such as Fitness First, Gold’s Gym etc. Or in a 5 star hotel health club. Physical education graduate from an established
university or college with certification in fitness instruction or with fitness industry experience of at least 5 years with leading
fitness industry service providers, and with fitness industry seminar certification to show ongoing successful fitness education.
Good working knowledge of stretching, cardio vascular (CV) machine workouts, plus machine and free weight workouts.
Certification within the last year for first aid /CPR. Pleasant manner, good English and or Arabic. In good physical condition and appearance (overweight out of shape candidates not accepted). Skilful in working with people of other cultures
MALE RECEPTIONISTS - 25-35 years of age. Several years working experience at a leading health club, franchise club
such as Fitness First, Gold’s Gym etc. Or in a 5 star hotel health club. College graduate, with pleasing personality, good in
communication skills.
ASAMCO ARABIA ALUMINUM MANUFACTURING CO.
(Accre #10135167) - Riyadh, K.S.A.
PLANNING ENGINEER (2) – BS Architecture or BS Civil Engineering. Minimum 2 years work related experience.
Familiar in Primavera 3.1 or Primavera 6 (P6)
QA/QC ENGINEER (2) – BS Architecture or BS Industrial Engineering, Mechanical Engineering or Civil Engineering.
Minimum 2 years related experience. Knowledgeable on aluminum profile and fixation
CONTRACT ENGINEER (2) – BS Architecture or BS Civil Engineering. Minimum 2 years related experience. Familiar on
FIDIC contract condition
COST CONTROLER – BS Architecture or Bachelor of Science In Civil Engineering. Minimum 2 years work related experience. Familiar with CONEX and MANEX Analysis, cost budgeting, cost risk assessment and Cost performance index,
Progress Payment Methodology and Cash Flow Forecasting, WBS Structuring (linked to program and progress payment
methodology) Primavera 3.1 or P6.
AUTOCAD DRAFTSMAN – BS Architecture or BS Civil Engineering / Mechanical Engineering. Minimum 2 years work
related experience. Well versed on AutoCAD operation. Can prepare Design Concept as per Client's requirements.
EXECUTIVE SECRETARY (Male) – College grad, w/ minimum 2 years experience in the same field. Fluent in English &
has excellent communication skills. Must have pleasing personality.
TECHNICAL DOCUMENT CONTROLLER - To establish, implement, monitoring and control regular incoming/outgoing
correspondence. Establishing efficient management systems for traceability of all document including numbering and type
prefix structure .Numbering document, procedure include protocols and arrangement for the web based communication
.condition. Well versed on preparing technical report and monitoring. Knowledgeable on Computer software available for
Document Controller. With 2 years Experience in construction industries
ALUMINUM INSTALLER/FABRICATOR (45) – High School or Vocational graduate. Minimum 2 years work related
experience. Previously works as an Aluminum Site Installer. Familiar on aluminum curtain wall, ACP cladding fixation.
Page 3 of 13
Familiar in factory aluminum tools and equipment e.g. CNC Machine, Metal bender or miter saw machine..etc. Can interpret
cutting list or plan requirements
ELECTRICIAN – High School or Vocational graduate. Minimum 2 years related work experience. Previously work as a
building/factory maintenance electrician. Can trouble shoot building/factory electrical wiring and equipment. Familiar to
electrical codes, system and diagram.
MECHANICAL TECHNCIAN – with 2 years experience in FACTORY. Familiar with the CNC machine, Mitter saw and
other aluminum factory machine. Knowledgeable on preparing trouble shooting report.
STRUCTURAL ENGINEER – BS in Civil Engineering. Minimum 2 years experience in the same field. Familiar in STAAD
software, operating and application or any software applicable for aluminum and glazing. Knowledgeable in Aluminum
Curtain wall, ACP cladding or aluminum louver Design Calculation is advantage.
HBK CONTRACTING CO. (Accre # 10137344) – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
TENTATIVE SCHEDULE OF INTERVIEW - JULY 29-31, 2011
FABRICATION SUPERVISOR -Piping/Vessel (2) FABRICATION QC INSPECTOR (2)
WELDING FOREMAN MECHANICAL PAINTING FOREMAN (2)
FABRICATOR - Piping/Vessels/Structures (5) MIG WELDER (5) HEAVY DUTY TRUCK DRIVER (25) MECHANICAL DRAFTSMAN (FABRICATION PROJECTS) PAINTING FOREMAN
SECRETARY / DOCUMENT CONTROLLER
SAUDI CRANES & STEEL WORKS FACTORY - Jubail, K.S.A.
ERECTION ENGINEER (Mechanical) – Mechanical Engineering graduate, experience on overhead crane manufacturing,
installation, erection, assembly, overhauling (cranes), mechanical design experience, crane girder manufacturing experience &
machining of the part & precise fitting experience.
SERVICE ENGINEER - Degree in Electrical / Mechanical Engineering. A dynamic & result oriented professional with more than three years of experience in after-sales-service, customer support, cranes spare parts and maintenance with a strong
background of sales. Experience in any crane manufacturing industries is a must.. Proficient in leading a team of technicians
on all technical matters to analyze product performance and provide technical feedback to the clients. Directing the team in
ensuring customer satisfaction by maintaining excellent turn around time (TAT) for delivery & service quality norms.
Familiarity with DIN, FEM AWS CMAA, ASTM, BS and other similar standards would be a definite advantage. To be able to
resolve the complaints/maintenance requests by maintaining a healthy relationship with customers. Identify and pursue new
business opportunities. Customer support and coordination with the client. Prepare quotations and all bidding activities. Good
Knowledge of Cranes spare parts. Good communication and presentation skills. Computer literate.
SPARE PARTS ENGINEER – Diploma in Engineering. Field experience / work experience on spares. Preparation of
various spare parts packages and cataloging. Recommended spare parts data package – cataloging experience. Maintaining and
monitoring the inventory. Estimation / preparation of quotations / review of P.O’s. Thorough computer knowledge MECHANICAL SUPERVISOR - Diploma in Engineering (mechanical). Minimum 5 Yrs field experience on Over head
crane assembly, fitting, Erection etc. Thorough knowledge about crane functions and components. Working experience on
trouble shooting, mechanical repairs, modernization, Erection, alignment inspection etc. Good communication skills. Must
understand the mechanical drawings. Basic Electrical knowledge
ELECTRICIAN TEAM LEADER (2) – ITI. Minimum 6 Yrs clear hand on experience on Overhead cranes. Must be able to
command a group of Electricians. Must read and understand wiring diagrams. Knowledge about the basic crane controls and
frequency control operations. Good communication skills (English)
CRANES ELECTRICIAN (4) – ITI. Minimum 5 Yrs clear hand on experience on Overhead cranes. Must read and
understand wiring diagrams. Knowledge about the basic crane controls and frequency control operations. Good
communication skills
MECHANICAL FITTER (3) – Minimum 5 Yrs clear hand on experience on Overhead cranes. Must have the ability to read
manufacturing drawings. Ability to complete installation work for various projects. Ability to work on installation and modifications to plant and equipment. Ability to assist in Crane assembly, repairs and testing.
SAND BLASTER – Min. 5 years experience in similar position. Possessing thorough knowledge of all the sand blasting
operations including safety guidelines. Good in communicating in English.
GHANIM AL MAZROA CONSULTANTS ENGINEER (Accre. # 10100031)
– Riyadh, K.S.A.
SAUDI ELECTRIC CO. PROJECT – Riyadh, K.S.A. SR. CONTRACT REPRESENTATIVES – BSCE/EE/ME grad/10 yrs exp in procuring contracts/developing bid
documents/contract documents for Civil/Electrical/mechanical works or projects/operation/maintenance
Page 4 of 13
services/related projects/services/10 yrs exp in developing scopes of work/technical specifications /computer
literate
CONTRACT REPRESENTATIVES – BSCE/ME grad/min 5 yrs exp in procuring contracts/developing bid
documents/contract documents for Civil/Electrical/mechanical works or projects/operation/ maintenance services/related projects/services/10 yrs exp in developing scopes of work/ technical specifications/3 yrs exp in
handling/negotiating/resolving contract disputes/claims/ computer literate
ARCHITECTURAL DRAFTSMAN – Minimum five [5] years relevant experience. Knowledge in Manual drafting. Knowledge in Autocadd, Photoshop, 3D programs, MS office (Word, Excel, Powerpoint) & other related softwares &
programs. Able to work independently or with a team, with less supervision.
INDUSTRIAL ENGINEER – Bachelor of Industrial Engineering. 10 years experience. Experience dealing with
applications of modern performance management. Experience in Strategic Planning. Experience in the design and analysis and
development processes. Ability to work on applications of comprehensive ERP. Understand, absorb and deal with total quality
programs. Proficient in both oral & written English. Excellent experience in the use of Microsoft Office programs.
SAUDI ELECTRIC CO. PROJECT – Dammam, K.S.A. CIS APPLICATION DEVELOPER – Have done system documentation and user manual writing at least one time. 30-45 years old. Must have experience in ASP.NET programming (3 years), Visual Basic.NET (4 years),Web Designing (4 years)
Active Server Pages programming (VB) 4 years, Visual Studio 2003 & 2005 (4 years),
SQL Server (3 years), Crystal Report and .NET programming (3 years). Working in workflow system such as Adobe and
archival system such as FileNet of similar product. Excellent command in both written and spoken English. B.S. Degree in
Computer Science or related fields acceptable to Saudi Electricity Company.
ALFARDAN MARINE SERVICES – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
MARINE TECHNICIAN (5) – Min. 5 years experience, preferably w/ overseas work experience, age between 28-38 years
old, and married with children
ALFARDAN GROUP HOLDING CO. – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
AUTO DENTER (3) AUTO SPRAY PAINTER
- Minimum 5 years experience. Experience MUST have been gained in branded Body-Shops like BMW, Mercedes,
Toyota, Nissan, etc. Candidates with prior Gulf experience are preferred. Age should be 28-35 years old, married &
w/ kids
HEAVY EQUIPMENT TECHNICAN – Male, 27-38 years old, specific Scania, Terex, Volvo Heavy Equipment experience is required, GCC experience is an advantage
PRESTIGE CARS CO. – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
LIMOUSINE DRIVER (35-40) – at least college level, can communicate well in English, polite & courteous, presentable &
w/ pleasing personality. Minimum 3 years experience as Driver preferably in a Hotel or rent a car company. Drivers w/
experience in driving limousine is an advantage. Must have valid professional driving license. Age should not be more than 35
years old.
MALE COUNTER STAFF (5) – College graduate, fluent in English both oral/written, must have minimum 2 years related
experience, presentable & w/ pleasing personality. Must be presentable. Age not more than 30 years old.
ALFARDAN AUTOMOBILES – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
PARTS PICKER – Male, 21-25 years old, spare parts experience in automotive industry is preferred, GCC experience is an
advantage
BMW TECHNICIAN – Male, 27-38 years old, specific BMW experience is required, GCC experience is an advantage
MAINTENANCE TECHNICIAN – Male, 27-35 years old, related maintenance work experience is preferred, GCC experience is an advantage
CASHIER (M/F) – 25-28 years old, related experience is preferred, GCC experience is an advantage.
ALFARDAN PREMIER MOTORS – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
PARTS STOCK CHECKER – Male, 24-28 years old, spare parts experience in automotive industry is preferred, GCC
experience is an advantage
Page 5 of 13
LAND ROVER/JAGUAR TECHNICAN – Male, 27-38 years old, specific Land Rover and Jaguar experience is required,
GCC experience is an advantage.
ALFARDAN GROUP – Doha, Qatar
ABSOLUTELY FREE PLACEMENT FEE
ALI M. AL QAHTANI EST. (Accre. # 10041251) – Dammam, K.S.A.
HVAC ENGINEER QC ENGINEER MOTOR REWINDER (2)
AL-MANNA METALS (Accre # 10160434) – Riyadh, K.S.A.
DIE CASTING OPERATOR CNC MAHINE CENTER OPERATOR
CNC LATHE MACHINE OPERATOR CAD/CAM PROGRAMMER DIE MAKER
YUKSEL INSAAT A.S. - Riyadh, K.S.A.
MECHANICAL ENGINEER ACCOUNTANT DRAFTSMAN (2) MECHANIC
WELDER HEAVY DRIVER BOBCAT OPERATOR
SAUDI INDUSTRIAL CONSTRUCTION & ENGINEERING PROJECTS (SICEP)
Riyadh, K.S.A.
All candidates should satisfy the requirements described under each category & the following general rules:
· Good communication & interpersonal skills in English
· Should be result oriented with ability to learn
· Ability to work under pressure
· Ability to work in a Team
· Should be medically fit
· Should be between 28 and 40 years old CIVIL SITE ENGINEER (4) – Should have a Bachelor of Science in Civil Engineering with 2 to 5 years working
experience especially in Water transmission lines & Sewage networks. Able to lead workers & guarantee performance. Should
have good experience in Computer Software (Microsoft office, Microsoft Project, Primavera, STAAD, SAP, Auto CAD 2D
& 3D). Should be able to control of cost of a project. Should have knowledge to make cost analysis of items. Able to estimate
quantity independently. Should have knowledge in project planning. Good knowledge in QA & QC. Speaks, writes &
reads English Fluently. Holds a valid Driving License.
CIVIL SURVEYORS (10) – Should have a Diploma in Civil Engineering 5 years working experience in structure, and in
Water transmission lines & Sewage networks. Should have good experience in design. Should have good experience in
detailed design of water/sewage treatment Plant & pipe line project. Should have good experience in using total station &
theodolites & auto levels etc. Able to estimate quantity independently. Should have good experience in AutoCAD 2D & 3D, also Microsoft office, & Excel. Speaks, writes & reads English Fluently. Holds a valid Driving License.
METROLOGICAL MECHANICAL ENGINEER (2) – Should have a Bachelor of Science in Power or Mechanical
Engineering with 5 years working experience in welding holding certificates of AWS/ CWI( American welding society/
Certified welding inspector). Should have experience in welding carbon steel pipes. Should have good experience in miter
cutting & micro miter work. Able to prepare effective reports. Should have experience in computer programs related to work. CARBON STEEL PIPE WELDERS (20) – Certified in carbon steel welding (6G & 6RG), with a min experience of 5 years in carbon steel pipes welding. Have experience in welding carbon steel pipes. Should have good experience in miter cutting &
micro miter work. Should have very well built healthy body. Should be very presentable & polite. Ex Yuksel / Mapa-Limak
workers will be given priority
HEAVY TRUCK (TRAILER) DRIVERS (11) – Should have very good experience in driving new model Dump Trucks &
Trailers , minimum experience 7 years. Should be presentable & polite. Should have Heavy duty digital driver license.
ALKHALEDIAH AGRICULTURAL COMPANY (Accre. # 10152921) – Riyadh, K.S.A.
ABSOLUTELY FREE PLACEMENT FEE
MAINTENANCE SUPERVISOR - Engineering Degree (preferably electro-mechanical). Minimum seven (7) years
experience in maintenance. With knowledge in electrical motors, pumps, electric heaters, exhaust fans, lightings circuitry, air conditioning and associated controls, generators and related switching, plumbing, sanitary piping. Knowledge in kitchen
equipments, swimming pools, water treatment. Carpentry, civil works is of great advantage. Driving capability is of great
advantage. Preferable Age between 35-45 years old. Fluent in English. Computer Literate (ability to use Microsoft Windows
Page 6 of 13
Programs) will be considered an asset. Capable of reading technical drawings and blueprints. Ability to recognize and
interpret technical references.
ELECTRONIC TECHNICIAN – High School Diploma or General Education degree (GED): and the ability to learn and
perform required duty. Working knowledge of satellite Television Services. Completion of approved training courses in
electronics.2 years experience in the installation, maintenance and operation, repair and operation of various type of electronic
equipment is required
PUMP TECHNICIAN H.E. MECHANIC CATERPILLAR MECHANIC
VIDEO HOME & ELECTRONIC CENTRE (Accre #10100866) – Doha, Qatar
SR. MEP PROJECT MANAGER (2) MANAGER SALES & MARKETING (Room AC)
SR. MEP PROJECT ENGINEER (3) SR. HVAC PROJECT ENGINEER
SR. PROCUREMENT ENGINEER - MEP (5) PROJECT SUPERVISOR (5)
SUPERVISOR ACCOUNTS (2) DUCT FACTORY SUPERVISOR (2)
SALES & MARKETING OFFICER - Corporate Sales (2)
SALES & MARKETING OFFICER - Key Retail Customers (2)
SALES EXECUTIVE (2) STOREKEEPER - SCLD (3)
MARKETING OFFICER - Appliances, Electronics, IT, GSM (2) STOREKEEPER - MEP (2)
FIRE ALARM/FIRE FIGHTING INSTALLATION TECHNICIAN (5)
LCD/LED TV TECHNICIAN (2) CNC MACHINE OPERATOR (2) DUCT FABRICATOR (4)
UNITED AIR CONDITIONING & ELECTRICAL COMPANY – Riyadh, KSA
HVAC ENGINEER ELECTRICIAN
UNITED COMPANY FOR CARAVAN & PREFAB HOUSES (Accre # 10177054) -
Riyadh, K.S.A.
ELECTRICAL ENGINEER – Knowledge in Designing and AutoCAD, Low Voltage and High Voltage, Fire Alarm Design,
IT wiring and Design
YOUSEF AHMED AL GOSAIBI & PARTNERS CO. LTD. – Al-Khobar, K.S.A. AC TECHNICIAN CAR ELECTRICIAN DIESEL MECHANIC
HEAVY DUTY/TRUCK/TRAILER DRIVER – Can drive heavy duty trucks (around the Kingdom), light vehicles and
Arabic speaking with sales experience in Gulf countries is preferred.
NESMA & PARTNERS CONTRACTING CO. - Mekkah, K.S.A.
QA/QC ENGINEER (CIVIL) ELECTRICAL TECHNICIAN MECHANICAL TECHNICIAN
- For all above positions - must have CHILLED TOWER & WASTE WATER PLANT, REVERSE OSMOSIS (R/O) PLANT
experience.
ELECTRICAL ENGINEER – Low Voltage, BMS System, CCTV System
SAFETY ENGINEER (MECHANICAL) – w/ Nebosh Training/certificate. 5 years work related experience
MUSLIM CLADDER (5) MUSLIM INSULATOR (5) MUSLIM INSULATION ASST. (5)
MUSLIM STEEL FIXER (30) MUSLIM PAINTER (10) MUSLIM FINISHING CARPENTER (10)
MUSLIM DUCTMAN (10) MUSLIM ELECTRICIAN ASST. (10) MUSLIM PIPE FITTER (10)
MUSLIM PIPE FITTER ASST. (10) MUSLIM SCAFFOLDER (10) MUSLIM TILER (20)
RIGGERS (Christian or Muslim)
GOLDEN TULIP ALHAMRA HOTEL – Dammam, K.S.A.
CAPTAIN WAITER (6) WAITER (6) COOK/KITCHEN HELPER (4)
DEMI CHEF (2) CHEF DE PARTE (2) BUTCHER PLUMBER
ELECTRICIAN ELECTRO-MECHANICAL TECHNICIAN
BUTCHER LAUNDRYMAN/PRESSMAN
AHMAD HAMAD ALGOSAIBI & BROS. – Al-Khobar, K.S.A.
LINUX ADMINISTRATOR NEON LIGHT INSTALLER/TECHNICIAN
AL WAROUD TRADING & CONTRACTING CO. –
Muscat, Oman
CIVIL ENGINEER (2)
ARABIAN EDUCATION & TRAINING GROUP - Riyadh, K.S.A.
ESOL INSTRUCTORS – Male instructors required for teaching E.S.L. To adult trainees in Saudi Arabia. These students
are college freshmen, civil servants, military personnel and generally public and private sector employees.
Page 7 of 13
A masters degree in TESOL/ English education or English literature , other degrees shall not be counted for
remuneration package allocation. Graduate degree supplemented by a professional certification shall be well
compensated.
Ph.d in Linguistics, English education/curriculum & instruction with English education track. Any supplement
professional credential shall be considered for extra compensation. Any other doctoral qualifications shall not be
considered in lieu of fulfillment of the position requirements. Experience in research related to TESOL, faculty tenure
shall be appreciated and recommended for appropriate compensation.
Pd.ed in teaching and learning/English teaching. TESOL also acceptable. Experience in teaching practice shall be
compensated in remuneration package.
SADEEM AGRICULTURAL CO. - Riyadh, K.S.A.
LANDSCAPE MANAGER – BS Agriculture Engineering grad or higher degree in landscaping horticulturist. Minimum 7
years experience in supervisory position in the field of grounds & landscaping operation w/ knowledge in irrigation system.
Good English communication skills & basic Microsoft programs. Preferably can speak Arabic
NURSERY MANAGER – BS Degree in Agricultural Engineering, Nursery Management or equivalent degree. Min. 8 years
experience direct field experience at commercial production nursery.
LANDSCAPE SUPERINTENDENT – BS degree in Agricultural Engineering. 7 years experience in the field of ground &
landscaping in an environment similar to Arabian Gulf region.
LANDSCAPE SUPERVISOR (8) – BS degree in Agricultural Engineering. 5 years experience of ground & landscaping in an environment similar to Arabian Gulf region.
LANDSCAPE FOREMAN (8) – Technical college diploma in Agriculture. 3 years experience in the same field. Should be
able to speak & write in English.
C&U SUPERINTENDENT – BS degree in Engineering (Civil/Electrical). 7 years experience in the field of construction & 5
years experience as Superintendent.
C&U SUPERVISOR – BS degree in Civil Engineering. 3 years experience in operation & maintenance.
C&U FOREMAN – Technical college diploma with 3 years experience in the same field
IRRIGATION SUPERVISOR – BS degree in Agricultural Engineering. 5 years experience in landscaping & irrigation
system
ELECTRICAL FOREMAN – Technical college diploma w/ 3 years experience in the same field.
HORTICULTURIST – Bachelor degree in Agricultural engineering. 7 years experience in plant propagation & landscaping.
PLANT PATHOLOGIST – BS in Agriculture (Plant Pathologist or Entomology). Min. 5 years experience on plant protection, plant diseases, pest control & plant propagation.
CHIEF MECHANIC – BS in Mechanical Engineering. Min. 5 years experience in the repair of all types of vehicles &
equipment. At least 3 years of which should be in supervisory capacity.
MECHANIC (2) – Technical college diploma/certificate in Auto Diesel Mechanic. Min. 5 years practical experience in the
same field.
SAFETY OFFICER – Technical Institute grad w/ seminars & trainings certificate. At least 2 years experience in the same
field.
PROCUREMENT OFFICER – Technical/College diploma w/ 3 years experience in procurement of materials including 2
years supervisory position. Computer literate & internet savvy.
BUYER – Should have Technical Institute diploma. 3 years experience in purchasing & canvassing. Should be able to speak
in English & Arabic. AUTO ELECTRICIAN – Technical College Diploma w/ 3 years experience in the same field.
AUTOCAD OPERATOR (2) – Should have a technical diploma level in architecture/drafting. Min. 3 years experience in
using Auto CAD Software.
DOME MAKKAH CONCRETE MIX PRODUCTS – Makkah, K.S.A.
HYDRAULIC MECHANIC (2) DIESEL MECHANIC MASON (5)
H.E. MECHANIC (2) LAB TECHNICIAN
- For all above positions – MUSLIM APPLICANTS ONLY & should have relevant work
experience in the same field.
SAUDI ARABIAN PACKAGING INDUSTRY – Dammam, K.S.A. &
Dubai, U.A.E.
QUALITY ASSURANCE INSPECTORS - Holder of college diploma/College level. Good English communication and writing skills. Familiar with ISO 9001:2000 standard. Computer literate: Microsoft excel, word and etc. Knowledge in
statistical techniques is an advantage. Minimum 5 years experience as Quality Assurance Inspector in can making industry
with expertise in can assembly and components’ manufacturing. Knowledge in lithographic printing and coating is highly
advantage.
Page 8 of 13
EXECUTIVE SECRETARY (Male) - has MPA, B.SC degree in secretary / has 5 years experience in Industrial companies
at least/age between 30 – 35/ good communication skills /office management (filing, appointment, reception, telephone calls ) /
editing skills / knowledge of Microsoft Office and telephone protocol /computer literate with the ability to learn new software
applications.
LITHOGRAPHIC PRINTER – Carton or Paper Printers who have worked on large format offset machines will also be
considered for the above position. Candidates must meet the following criteria to be considered for an interview. Age: 25 - 35
years old. High School, Candidates having a Diploma in Printing Technology or completed a full apprenticeship with leading
Metal Decorators will be given preference. Good in Speaking, Reading & Writing in English Should have a minimum of 5
years Metal Decoration experience. Candidates with previous overseas experience and having experience on Crabtree 1290 or
Fuji printing presses will have an added advantage.
ALMAHARAH SEAFOOD RESTAURANT – Doha, Qatar
OPERATIONS MANAGER – Must have at least 7 years experience in casual to fine dining restaurants (preferably 5 star
hotel restaurants), handling at least 5 branches and in the same capacity. Must have knowledge and experience in Planning,
Leading, Organizing and Control. Must have strong time management, customer service management and negotiation skills.
Must be experienced in promotions, marketing and advertising. Must have strong people management skills, including
performance management. Must be experienced in making set menus, food costing, and inventory management. Must have an
in depth knowledge on Good Manufacturing Processes and HACCP. Must have knowledge and experience in operations
policy making and implementation. Must be willing to work long hours and on a shifting schedule. Educational Requirement:
Must be a Bachelor’s Degree Holder KITCHEN MANAGER – Must have at least 5 years experience in a 5 star hotel in the same capacity. Must have strong
personality and with strong people management skills and implementation skills. Must be experienced in making set menus,
food costing, and inventory management. Must have an in depth knowledge on Good Manufacturing Processes and HACCP.
Educational Requirement: Must be a Bachelor’s Degree Holder. Age Requirement: 30 to 40 years old
SOUS CHEF – Must have at least 5 years experience in a 5 star hotel in the same capacity. Must have strong personality and
with strong people management skills and implementation skills. Must be well experience in Quality and Production Control.
Must have an in depth knowledge on Good Manufacturing Processes and HACCP. Age Requirement: 30 to 35 years old
KITCHEN ARTIST – Must have at least 2 years experience in a 5 star hotel. Must be creative. Must have ice, fruit and
vegetables carving skills. Must have strong quality and production control Skills. Education Requirement: Must at least be an
Associate in HRM or equivalent. Age Requirement: 25 to 35 years old
STOREKEEPER – Must have strong inventory management skills. Must be keen and observant to details. Must have in depth knowledge and experience in GMP and HACCP and its implementation. Must be experience in using Microsoft Office
Applications, specifically MS Excel
HVAC TECHNICIAN (2) – Must have at least 5 years experience in the same capacity.Knowledge and Experience in
troubleshooting: Kitchen Equipments, Refrigerators and Chillers, Air Conditioning Units. Knowledge in the following is an
advantage: Electrical, Welding, Plumbing, Carpentry, Masonry. Preferably with a valid GCC Driver’s License. Age
Requirement: from 25 to 35 years of age
WAITER/WAITRESSES (5) – Must have at least 2 years experience in casual to fine dining restaurants. Must have pleasing
personality. Must be able to communicate well in the English Language; to be able to communicate also in Arabic is an
advantage. Must have in depth knowledge of customer service and has experience in handling customer complaints. Must be
familiar with the customer cycle. Height requirement: at least 5”4 for females and 5”6 for males. Age requirement: from 23 to
30 years of age
BARTENDER (2) – Must have at least 2 years experience in casual to fine dining restaurants. Must have pleasing personality.
Must be able to communicate well in the English Language; to be able to communicate also in Arabic is an advantage. Must
be experienced in using different bar equipments.. Knowledge and experience in serving is an advantage. Height requirement:
at least 5”4 for females and 5”6 for males. Age requirement: from 23 to 30 years of age
CASHIER (2) – Must have at least 2 years experience in casual to fine dining restaurants. Must have pleasing and strong
personality. Must be able to communicate well in the English Language; to be able to communicate also in Arabic is an
advantage. Must have in depth knowledge of customer service and has experience in handling customer complaints.
Educational Requirement: Any business related course. Height requirement: at least 5”4 for females and 5”6 for males. Age
requirement: from 23 to 30 years of age
MS INTERNATIONAL MANAGEMENT CONSULTANTS - K.S.A.
SURVEYOR ENGINEER (5) ARCHITECT (5) ELECTRICAL FOREMAN (5)
HVAC FOREMAN (5) ELEVATOR FOREMAN (5) FIRE ALARM FOREMAN (5)
ROYAL PALACE – Riyadh, K.S.A.
MALE CLEANER (5) – must have experience in the same capacity preferably in a hotel
ACE CONTRACTING CO. (Accre # 10178349) – Riyadh, K.S.A.
ELECTRICAL TECHNICIAN (2) MECHANICAL TECHNICIAN (2)
Page 9 of 13
AL-OTAIBI STEEL FABRICATION FACTORY – Jubail, K.S.A.
STEEL FABRICATORS CERTIFIED WELDERS (6G/4G/3G) AUTOCAD OPERATORS
PIPE FITTERS MECHANICAL TECHNICIANS MACHINIST (all around)
VALVE TECHNICIANS
MADAM NAJAT ALGOSAIBI – Al-Khobar, K.S.A.
DRESSMAKERS (Cut & Sew)
THE BAGEL SHOP – Al-Khobar, K.S.A.
BARISTA/COFFEE MAKER – Candidate must possess at least a Vocational Diploma / Short Course Certificate, Food &
Beverage Services Management or equivalent. At least 2 years of working experience in the related field is required for this position. Preferably 2-4 Yrs Experienced Employees specializing in Food/Beverage/Restaurant Service or equivalent. With
good commands of oral and written English. Male, Age: 23 - 32 years old
COOK – Candidate must possess at least a Vocational Diploma / Short Course Certificate, Food & Beverage Services
Management or equivalent. Experience in Baking; Sandwich and Pizza Making; and Pastry. At least 4 years of working
experience in the related field is required for this position. Preferably 4-8 Yrs Experienced Employees specializing in
Food/Beverage/Restaurant Service or equivalent. With good commands of oral and written English. Male, Age: 25 - 35 years
old
BREAKFAST COOK – Candidate must possess at least a Vocational Diploma / Short Course Certificate, Food & Beverage
Services Management or equivalent. Specialized in cooking Continental and American Breakfast. At least 4 years of working
experience in the related field is required for this position. Preferably 4-8 Yrs Experienced Employees specializing in
Food/Beverage/Restaurant Service or equivalent. With good commands of oral and written English. Male, Age: 25 - 35 years
old
APTC TRADING COMPANY – DAMMAM, KSA
ELECTRONIC TECHNICIANS – must have experience in revolving doors, shuttered doors and loading dock, well
experienced in Fiber Optic Perimeter Security, CCTV cameras, Microwave, etc.
COMPUTER TECHNICIANS – must have experience in revolving doors, shuttered doors and loading dock, well
experienced in Fiber Optic Perimeter Security, CCTV cameras, Microwave, etc.
SECRETARY (Male) – minimum 3 years experience in the same capacity, must have pleasing personality, 25-35 years old,
shorthand knowledge is a plus
AHMAD HAMAD ALGOSAIBI & BROS. – Al-Khobar, K.S.A.
NETWORK ADMINISTRATOR – Computer Science/Computer Engineering graduate. At least 2 years relevant experience,
relevant background in network administration, training in information and network systems. Experienced in local & wide
area management & administration. Experience in supporting Linux & Microsoft server technologies. Knowledgeable in
Linux & Microsoft Operating System, local & wide area networks, internet, e-mail system & configuration,
telecommunications & data communication. Able to install software packages & utilities. Conversant in both spoken & written English. Knowledge of Arabic language is an advantage. Possessing a Network Administrator Certificate, Certified in Linux &
Windows Administration. 23 years old & above.
SILVER STAR LABOR SUPPLY RECRUITMENT (Accre. # 10153223)
Abu Dhabi, U.A.E.
LADY DRIVERS – must have 5 years experience in Driving (after issuance of driver’s license), must have
pleasing personality, 25-40 years old, good command of the English language, GCC experience will be an
advantage HOUSEMAIDS – knows all household chores, diligent, trustworthy, hard working, polite/courteous, must have
pleasing personality, can easily adopt to new environment, can get along easily with people, cooking and GCC
experience is preferred. 25-40 years old.
AL-MANNA METALS (Accre # 10160434) – Riyadh, K.S.A.
MAINTENANCE ENGINEER – B.S.M.E. graduate, with at least 2 years experience in the same capacity, preferably with
experience in industrial maintenance (Electrical/Mechanical aspect), can perform preventive maintenance on electrical &
machining equipment. Good both in oral & written English.
SAUDI JORDANIAN GLASS CO. – Riyadh, K.S.A.
SUPERVISOR GLASS CNC MACHINE OPERATOR
Page 10 of 13
GLASS BEVELLING MACHINE OPERATOR (2)
GLASS DRILLING/MILLING TECHNICIAN
GLASS CUTTER GLASS LAMINATOR (2) GLASS SAND BLASTER (2)
GLASS FUSSION (2) STAINED GLASS (2) GLASS PROCESSING MACHINE TECHNICIAN STAILESS STEEL WELDER (3) FRAMELESS GLASS INSULATOR (4)
SPIDER SYSTEM GLASS INSULATOR (4) CERCON COMPANY – Riyadh, K.S.A.
CIVIL ENGINEER (3) QUANTITY SURVEYOR (2)
AUTOCAD OPERATOR (2) LAB TECHNICIAN (2) ARCHITECT (2)
ZASCO – Riyadh, K.S.A.
MECHANICAL ENGINEER ELECTRICAL ENGINEER ELEVATOR TECHNICIAN
PUMP TECHNICIAN LAUNDRY TECHNICIAN
AFT & FASTWAY GROUP – Rastanura, K.S.A.
CIVIL ENGINEER (3) – Civil engineering graduate, must have minimum 2 years experience in KSA/GCC in
Petro-Chemical Construction.
DETECON AL SAUDI COMPANY - Riyadh, K.S.A.
IP-MPLS TECHNICIANS – Minimum 2 years experience in the field of O&M of CISCO/Junifer routers. Preferred
knowledge of the following types: CISCO CRS-1 and 76xx series; JUNIPER M320 and E1440. Sound knowledge in
NETWORKING, CONFIGURATION and TROUBLESHOOTING are advantageous. CCNA qualification is essentially
required. CCIE qualification is advantageous.
SATELLITE TECHNICIANS – Minimum 2 years experience in the telecommunications industry with emphasis on satellite
communication or radio transmission systems. Experience in HPA, GCE or Servo / Satellite Tracking Systems are preferred.
O&M Satellite test equipment (sweep generators, spectrum analyzers, BER Testers, power meters, video/audio test equipment,
power senors, etc.). Sound understanding of SDH fundamental principles is advantageous.
SDH TECHNICIANS – Must have 2 years experience in O&M of telecommunication network, sound understanding of SDH
fundamental principles and systems including DWDM and MESH networks with experience in Nokia/Siemens,
Alcatel/Lucent, Huawei SDH equipment or Submarine Cable Stations, familiar with telecommunication measurements (e.g.
Bit error tests), corrective and preventive maintenance. Technical diploma is a must.
FO CABLE TECHNICIANS – Strong working knowledge of telecommunications industry with necessity in the area of fiber
splicing & testing. Sound understanding of fundamental principles of optical transmission. Basic knowledge of transmission
network such as ring types, NE Name, slot, sub slot, port, vendor, transmission capacity, etc. Basic understanding of design
parameters of outside plant installation including civil construction requirements and material specifications. Sound
knowledge of fault management practices including fiber optic splicing & fiber optic cable handling procedures, quality
requirements for joints and connects for temporary and permanent repair, emergency and permanent restoration procedures,
fiber optic network fault detection procedures. Familiar with test equipment being utilized in fiber optic cable testing and fault
tracing (i.e. Cleavers, Fusion Splicer, Mechanical Splices, etc.). Ability to use cable locator for correct, safe & efficient
according to the standard operating procedures of the company. Able to read & understand outside plant As-Built & splice
diagrams. Able to understand cable utilization plans and technical drawings & manual of test & measuring instruments used in
outside plant.
NEW JOB ORDERS (As of 13 JULY 2011)
DR.BASSAM AL-HEMSI MEDICAL CENTER – Riyadh, K.S.A.
DIALYSIS HEAD (CHARGE) NURSE (2) – female, minimum 8 years experience in the field of dialysis. Have
the certification of Saudi commission for health specialties (valid Saudi Council license). Applicants with GCC
experience is preferred STAFF NURSE (6) – female, 3-4 years experience as a Staff Nurse. Preferred to have the experience as a Dialysis
Nurse or IV, ER , ICU Nurse . Have the certification of Saudi commission for health specialties (valid Saudi
Page 11 of 13
Council license) . Applicants with GCC experience is preferred. Should have a bachelor’s degree in Nursing. CPR
certified.
ASSISTANT NURSE (6) – female, two years experience as an Assistant Nurse. Must have the certification of
Saudi commission for health specialties (valid Saudi Council license) .Should have a bachelor’s degree in Nursing CPR certified.
DAMMAM FACTORY for METAL PRODUCTS – Dammam, K.S.A.
SALESMAN – Must have experience in selling all types of blinds, curtain rods, aluminum ceiling, folding doors, should be computer literate, excellent knowledge in Microsoft Office specially power point. Very good in
presentation and have 2-3 years experience in the same field not more than 35 years of age. Knowledgeable in
Photoshop is advantage.
ALL QUALIFIED APPLICANTS MAY APPLY PERSONALLY WITH 2 SETS OF COMPREHENSIVE RESUME, DIPLOMA, CERTIFICATE OF EMPLOYMENT, SEMINARS / TRAININGS ATTENDED, 4 PCS. 2X2 PICTURE
(white background) ORIGINAL PASSPORT/NBI & OTHER CREDENTIALS.
FOR MANPOWER POOLING ONLY NO FEES TO BE COLLECTED. BEWARE OF ILLEGAL RECRUITERS
Page 12 of 13
Page 13 of 13