Embed Size (px)
Citation preview
Designed for longer life - all feed contact parts are made from stainless steel, including the roller main shaft and die housing.
Shear pin hub array - protects the shaft against damage from seizing up due to tramp metal. The design enables convenient shaft removal and remote lubrication of the rolls and main bearing.
Compact profile, small footprint, and modular design - makes the mill easy to fit in your facility. The "die-area to kW" combinations provide increased efficiency and through put whilst maintaining pellet quality, fewer blockages and longer life. The PMV 919W can easily be modified to PMV919XW providing approx. 30% increase in die area or PM919TW giving an increase in die area of approx. 58%.
Optional accessories• Builtinhoistwithliftingtoolsforeasysafediechanges.
Motorized hoist is also available facilitating quick/easy die change. Can also be used for maintenance at the rear of the machine.
• Centrifeederdevice–providesuniformfeeddistribution,even with the most difficult of feed types.
• Automaticgreaselubricationsystem-forrollbearingsandmain shaft bearing.
• Fat-on-diespraysystem.• Rangeofconditionerchamberavailabletoprovide
optimum retention time for specific capacity requirments.• Computerizedpelletmillcontrolsystemforprocess
optimization.
220 GB
PELLET MILL, BELT DRIVEN
TYPE PMV919W / 919XW / 919TW
Cost-cutting, efficient pellet mill for high production
The V-belt pellet mill series PMV offer rock-bottom production costs in the simplest and most efficient pellet mill design available. Proven for more than 40 years of operation, the V-belt pellet mills have fewer parts for less wear, quiet operation and lower maintenance costs. This highly dependable pellet mill produces pellets at the minimum costs per ton.
Simplest, most rugged, most efficient pellet mill designThe power train features two rugged bearing, a main shaft and the die housing. Internal components are heat-treated stainless steel for corrosion resistance, strength, and long life. The pellet mills are noted for the massive main shaft’s durable, on-piece construction. The center main bearings can be lubricated from the rear while the mill is running. Long-term, maintenance-free operationV-belt pellet mills delivers long-term, maintenance-free operation for both severe and light duty applications. The resilient V-belt drive protects the pellet mill from severe shock load while the flywheel effect of the large driven sheave smoothes out pelleting surges.
Effective feed distribution Auniqueone-pieceadjustablefeedploughdesignusesfewerboltsforfast,easyadjustment.Ensuresuniformityoffeed distribution across the face of the die ahead of each roll.
Taper die fit- the self-piloting effect makes changing dies fast and easy. Once the die has been aligned with the housing, only 3 mm requires full power torque on the die bolts to completethepressfit.Replaceablewearringsinthehousingreduces maintenance costs.
220 GBAll data, information, statements, photographs and graphic illustrations made in this leaflet are without any obligation and raise no liabilities to or form part of any sales contracts of Andritz AG or any affiliates for equipment and/or systems referred to herein. © Andritz AG 2009. All rights reserved. no part of this copyrighted work may be reproduced, modified or distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of Andritz AG or its affiliates. Any such unauthorized use for any purpose is a violation of the relevant copyright laws. Andritz AG, Stattegger Strasse 18, A-8045 Graz, Austria.
AD
it
0709
PELLET MILL, BELT DRIVEN TYPE PMV919W / 919XW / 919TW
A
C
B
380
300
AE F
DRight rear mounted main motor(also available as left rear mounted)
PMV919 W XW TW
A 498 560 608
B 578 640 688
C 943 1043 1093
D 3815 38653925
E 600 671 696
F 343 372 403
MAIN MOTOR max. 315 kW (400 HP) 50/60 Hz 1450/1750 r.p.m.FEED SCREW Freq. contr. gear motor 3 kW (4 HP) 0-170 r.p.m. CONDITIONER Type CM901 Motor 11.0 kW (15 HP) 750/900 r.p.m. Volume 750 litres Type CM1101 Motor 22.0 kW (30 HP) 750/900 r.p.m. Volume 1000 litres Type CM901/CM901K Number of steam inlets 9 x 1" Type CM1101 Motor 22 kW (30 HP) 750/900 r.p.m. Volume 1370 litres Type CM1101K Motor 30 kW (40 HP) 750/900 r.p.m. Volume 1960 litres Type CM1101/CM1101K Number of steam inlets 8 x 2" Type 919W Type 919XW Type 919TW DIE Diameter inside ø910 mm ø910 mm ø910 mm Effective press width 190 mm 250 mm 300 mm Effective press area 0.54 m2 0.71 m2 0.86 m2
DIE VELOCITY V-belt drive, 4-pole 1450/1750 r.p.m. 5.0/10.0 m/sec V-belt drive, 6 pole 990/1190 r.p.m. 6.0/8.0 m/secPRESS ROLLERS Number 3 Roller diameter outside 370 mmCAPACITY With steam addition 20-60 t.p.h.TOTAL WEIGHT Incl. main motor Incl. conditioner 11000 kgs 12000 kgs 12300 kgs
ANDRITZ FEED & BIOFUEL A/S Denmark. TeI. +45 72160 300 [email protected] ANDRITZ FEED & BIOFUEL B.V. The Netherlands Tel. +31 40 2627777 [email protected] FEED & BIOFUEL, Division of Andritz S.A.S., France Tel. 33247506364 [email protected]
ANDRITZ FEED & BIOFUEL Ltd. England Tel. +44 1482825119 · [email protected] FEED & BIOFUEL eine Zweigniederlassung der Andritz GmbH. GermanyTel. +49 2104 9197-0 [email protected] ANDRITZ FEED & BIOFUEL Divsion Of Andritz Inc. USA Tel. +1 5705468211 [email protected]
ANDRITZ FEED & BIOFUEL Rep. Office Venezuela Venezuela Tel. +58 241 8422515 [email protected] FEED & BIOFUEL, Division of Andritz Hydro S.A. de C.V. Mexico Tel. +52 (229) 178 3669 [email protected] ANDRITZ FEED & BIOFUEL Brasil Ltda.Brasil Tel. +55 51 3333 0128 ·[email protected]
ANDRITZ FEED & BIOFUEL Division of Andritz Chile Ltda.Chile Tel.: +56 2214 5711 [email protected] ANDRITZ FEED & BIOFUEL Divsion Of Andritz Pty Ltd. Australia Tel. +61 3 8795 9800 [email protected]
ANDRITZ FEED & BIOFUELRep. office VietnamTel.: +84 8 6253 [email protected] FEED & BIOFUEL Division Of Andritz Technologies Ltd. P.R. China Tel: +86 21 64670285 [email protected]
