Quicke Dimension – Premium Loaders Original … and Implement Retail Price...Quicke Dimension – Premium Loaders . Original Implements. Quicke Dimension . Series. alo.uk.com. Retail

Quicke Dimension – Premium Loaders Original Implements

Quicke Dimension Series

alo.uk.com

Retail Price List V2.0

March2016

User GuideSpecification Quicke Dimension series Recommendations PageTechnical Data Counterweight and Bucket Recommendations C1Loader Prices, Subframe Codes, Types and Widths Implement – Loader Recommendations C2LCS ErgoDrive, EasyDrive, ElectroDrive and Options Implements PageLCS Live3 (similtaneous tip/crowd 3rd service) and Options Buckets – H, HT, HD, HV, HDV C3AAC Sensor and Hose Burst Kit Special Buckets – Hydraulic Conversion Kits Multipurpose (4 in 1), Hy-Tipping, Grading and Precision QD Loader Options Bucket Grabs – QD Loader Tool Carrier and Adapter Options Multibenne, Powergrab SE, Powergrab BOHQD Bearing Box and Older Loader Options Forks and Grabs –

Tractor Make Manure fork, Silograb, Silocut SGII and Maxi GrappleCase IH 12 13 Bale Handling – Round bale handling & Square bale handler C7Claas Square bale forks (fixed and hinged), Deutz 15 16 Lifting – Pallet Forks,Fendt Lifting – Big Bag Lifter, Single, Dual and Triple Bag

Fiat and Ford (US subframes only) Other Implements – JCB Fastrac 3 Point Linkage Hitch, Stone Fork, Silo SplitJohn Deere 20 21 Skidsteer Implements –

Kubota Buckets, Bales Spikes, Pallet Forks and Weld On HooksImplement Selection Advert Hook Types - Loader

Landini 24 25 Euro, Alo Type 3, Trima and MX Hooks (including dimensions)

Massey Ferguson 26 27 Hook Types - TelehandlerMcCormick 28 29

New Holland 30 31Same 32 33Valtra 34 35 Other Info Page Zetor Helpful Information

Q88 and Q98 loaders - High horsepower tractors Weights of Material Chart, Conversion ChartsBelarus, Hurlimann, Kioti, Lamborghini, Older Renault, Steyr & Ursus Contact Info, Carriage Charges and important info Inside back

Claas Scorpion, JCB Q-Fit, Manitou, Matbro Pin and Cone, Merlo, Volvo Large BM

C11

C12

8

19

C4

C11

C5

C6

C10

C8

C9

CONTENTS

1234

Page

Contact Alo UK

37

5

Page

6

18

10

2322

17

11

9

7

14

36

2

Ordering Information1 Take down the Model and type of implement you require

Model example - Silograb 170 (170 = 1.70m wide)Not a recommended match 2 Make and Model of front loader or handler for some AgLine implements

The loader will NOT fit the tractor. 3 Type of hook system required

8,150 US/UM subframes available only 4 Note the discount code A or B and retail priceUS/UM subframes only 5 Email your order to your area manager or to [email protected].

The price specified at the intersection comprises of the following components:

1 Only use the recommendations in this price list.

1

Should you wish to discuss your choice in more detail, please contact your local Alo UK Area Manager (phone numbers are in the inside back cover) or contact the Alo UK Sales Office direct on 01299 250922, Fax 01299 250944, E-mail: [email protected]

Alo UK price list covers all UK markets excluding Northern Ireland. All prices are in Pounds Sterling.All prices are excluding VAT. We hold a policy of continuous improvement. We reserve the right to change product specification and prices at any time without prior notice.

Some loaders may require extended bearing boxes and are FOC when ordered with loader.Extra cost when ordered afterwards – see notes .

4 Rear counterweight must be used with front loaders in accordance with regulation EN 12525 (See page C 1)

Use the recommendatiins as a guide to chose to correct implement for you tractor

Ensure the implement is right for your machine

Ensure you check that your implement selection is recommended for your loader or the work to carry out.

Choose the implement you require

Loaders

Alo UK will not accept any responsibility if damage or failure occurs as a consequence or an incorrect implement to tractor/telehandler combination. I.E. Implement too large for loader/handler, .loader/handler is too large for implement

2

The Machinery Directive 2006/42/EC applies to all material handling machinery and should be interpreted in conjunction with all ROPS (Roll Over Protection Structure) and *FOPS (Falling Object Protection Structure) to ensure operator protection. Please familiarise yourself with Machinery Directive 2006/42/EC.*Do not mount a non-parallel loader to a tractor without FOPS*

3Hydraulic Valves

A guide to using this dealer price list Please read this information carefully

This price list has been designed to ensure choosing a Quicke® loader and Original Implement™ and correctly matching them to the tractor in a simple operation.Use the following guidelines to assist you…

AgLine

2nd year warranty on Silocut SG covers structure only and does not include any wearing part(s) or hydraulic components.

Short subframes (price code DS or DM) usually mount from the front bolster of the tractor to the front of the transmission. Long subframes (price code DSX or DMX) run the entire length of the tractor, to the rear axle. Tractor front grille-guards (if applicable) are included in the price. Some ‘DMX’ subframes are priced as ‘DM’. Occasionally additional items (e.g. Exhaust elbows, Power beyond plates etc) may also be required but not necessarily specified; therefore it is important to check with our sales office before calculating the final price. On some occasions, it may be necessary to obtain optional parts from the tractor manufacturer.When a shaded intersection is shown, a US or UM subframe is used

ErgoDrive LCS mono-lever control valve comes in either Open Centre (OC) or Load Sensing (LS) configuration.EasyDrive LCS Code “EY” (EasyDrive) is also available or upgrade to ElectroDrive LCS Pro.Hose kit options may also be available for you tractor.Note – a conversion kit may be required depending on loader/hydraulic combinationFinally, choose from our large selection of implements at the rear of the price list.

Choose a loader compatible to your requirements from the specification sheet on page 2 and 3 of the price list.

Select the appropriate price sheet for the tractor to which the loader is to be fitted.

1

Select the tractor model from the left-hand column and the loader model along the top row of the sheet. If there is a price specified at the intersection of the column and row, this is a recommended match for the tractor and loader.Four other possibilities should be noted here…

Parallel Loader.

Subframe. (Also refer to page 4)

Price includes Euro implement carrier, mechanical latching (c/w Clic-On) and factory fit 3rd service and Electric SoftDrive .

Price includes Euro tool carrier, mechanical latching (c/w Clic-On), factory fit 3rd service.

Non parallel Loader.

d. Loader format not available

c. Shaded Intersection

b. Black Intersection

a. No price specified

2

Loader Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78 Q88 Q98Standard equipment →

Max recommended tractor weight Kg 4000 4000 4500 5200 6000 4000 4000 4000 4500 4500 4500 5200 5200 6000 6000 7000 7000 9000 13000

Tractor size 50-80 50-80 60-100 80- 120 100-150 50-80 50-80 50-80 60-100 60-100 60-100 80-120 80-120 100-150 100-150 120-190 120-190 >150 >200

Lift height to pivot pin A m 3.50 3.50 3.75 4.00 4.25 3.50 3.50 3.65 3.75 3.75 3.90 4.00 4.00 4.25 4.25 4.50 4.50 4.95 4.95

Lift height under level bucket B m 3.20 3.20 3.45 3.70 3.95 3.20 3.20 3.35 3.45 3.45 3.60 3.70 3.70 3.95 3.95 4.20 4.20 4.65 4.65

Lift capacity max lift height 80 cm from pivot pin X Kg 1220 1450 1500 1640 1970 1310 1590 1310 1630 1920 1600 1720 2010 2120 2450 2120 2430 2770 2600

Lift capacity 1.5 m lift height 80 cm from pivot pin Kg 1250 1500 1560 1680 1980 1440 1740 1360 1800 2110 1720 1930 2250 2250 2590 2370 2700 3050 3210

Lift capacity ground level 80 cm from pivot pin Kg 1390 1660 1730 1860 2130 1530 1840 1380 1910 2250 1800 2070 2410 2330 2680 2540 2900 3340 3610

Lift capacity max lift height at pivot pin Kg 1760 2060 2150 2310 2710 1520 1800 1520 1900 2210 1890 2060 2370 2440 2780 2490 2820 3070 2880

Lift capacity 1.5 m lift height at pivot pin Kg 1980 2310 2430 2560 2910 1640 1950 1560 2060 2390 1980 2200 2530 2520 2870 2650 3000 3400 3590

Lift capacity ground level at pivot pin Kg 2310 2690 2810 2920 3220 1920 2270 1750 2400 2770 2220 2520 2890 2790 3170 2990 3380 3930 4210

Max tear-out force 800 mm out from pivot pin 2410 2410 2800 2840 3360 2380 2380 2330 2770 2770 2830 2810 3850 3360 4470 3870 4480 4460 4450

Rollback angle (degrees) C Min 44 44 43 46 45 44 44 44 43 43 44 45 45 45 45 44 44 44 42

Dump angle (degrees) D Min 58 58 59.7 55.5 52 58 58 58 59.7 59.7 54.5 55.5 55.5 52 52 52 52 48.5 50

Implemet cylinder dimensions 75/40 75/40 80/40 80/40 85/40 7540/40

7540/40

7540/40

8040/40

8040/40

8040/40

8040/40

9040/40

8540/40

9540/40

9040/40

10050/50

10050/50

10050/50

Lift cylinder dimensions 70/40 75/40 80/40 85/50 90/50 65/40 70/40 65/40 75/40 80/40 75/40 80/40 85/50 85/50 90/50 90/50 95/50 95/50 100/50

Lifting time to max lift height at 60 l/min Sec 3.8 4.4 5.0 5.7 6.9 3.3 3.8 3.4 4.4 5.0 4.4 5.1 5.7 6.2 6.9 6.9 7.7 9.5 9.9

Parallel device

3rd service

Softdrive

Loader to subframe securing system

Loader weight Kg 450 450 515 554 628 521 521 544 585 585 595 621 621 721 721 760 760 838 935

Euro Combi tool carriers available for Euro No 8/Alo 3 hooks, Euro No 8/Trima SMS hooks and Euro No8/MX, Euro/Faucheux - additional £200. Lift heights for loaders mounted on to US and UM subframes are approximate. Heights will differ!

Lock & Go Lock & Go

No Yes

Yes Yes

No Yes

Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go

NON PARALLEL PARALLEL (Self Levelling)

Euro T/C c/w clic on, 3rd service and Lock & Go

3

Max system pressure: 250 barMax tank pressure: 20 barPilot oil pressure: 23 barMax recommended flow, fixed pump: 120 L/minMax recommended flow, variable pump: 150 L/minRegulated flow to loader: Max 90 L/min

Some Quicke Dimensions features at a glance

Technical dataReference values for specification charts.

Use the above diagram as a reference chart for the specification page.Depending on make and model of tractor, lift heights for loaders may differ to specification!

Hydraulic Data.

NEW LCS TECHNICAL DATA

OPEN CENTRE HYDRAULIC SYSTEMSNormally, manufacturers specified values are obtained at a hydraulic oil pressure of 185 bars with a flow rate of 60

litres per minute.

Please note that on tractors with open centre hydraulic systems, 60 litres per minute is normally quoted at rated

engine RPM (i.e 2150 rpm).

Non-Parallel loaders Excellent visibility Strong construction Clic-On quick attach

A

B

80cm

C

D

X

Great hitching visibilityParallel loaders

PT

LS

T

P

Serial

Load Sensing Open Centre

4

DS DM DL DXL US UM Codes PricesQ31 £3,870 • • •Q33 £4,170 • n/a DSQ41 £4,370 • • DSXQ51 £5,070 • • DMQ61 £5,870 • n/a DMX £1,795

DL £2,295Q36 £5,120 • • • DXL £2,495Q38 £5,420 • n/a SP1 £4,795Q39 £5,520 • SP2 £6,000Q46 £5,620 • •Q48 £5,920 • n/a S SX M MX £1,795Q49 £6,120 • n/aQ56 £6,320 • • •Q58 £6,620 • n/a OC & LS £1,075Q66 £7,120 • •Q68 £7,420 • n/a SHK £575Q76 £7,720 • • HK (deluxe) £1,275Q78 £8,020 • HK3 (live 3) £775Q88 £9,920 •Q98 £10,920 n/a • EY £1,575

Note - Q21 and Q26 are no longer available. E £1,875Utilise Versa-X series.

Subframe widthsLoaderModel

LoaderPrice

Subframe Compatibility

n/a

n/a

Electric Controlled

Delta System

US UM System

n/a

n/a

n/a

n/an/a n/a

Certain models from the Quicke Dimension range are available with US and UM bearing boxes, so that they can

mount to their respective subframes.US loader width – 900mm

UM loader width – 1040mm1. Previous model Quicke loader mounted to US or UM

subframes where the customer wants to update the loader but not the tractor.

2. If a Delta subframe is not available for an older tractor model.

n/a

Loader Prices, Subframe Codes and PricesSubframe Codes

Hydraulic Codes

£1,595

Hose Set

Cable Controlledn/a

n/a

Para

llel L

oade

rsN

on P

aral

lel

1200mm standard width

"DL" Extra wide For large high horsepower

tractors

DXL Super wide1420mm

1040mm

"DM" Delta wide"UM" System

"US" System

900mm

A. Subframe saddle close to loader beam pivot point.B. 30 mm upright.

C. 200 or 250 mm deep upright.D. Lock & Go connection.

BenefitsVertical point coupling.

Larger dimensioned subframe.Maximum space for tractor servicing.

Long subframeDelta DMX type

D

A

C

B

Short subframeDelta DM type

5

OCLS

Part No TJ107 Part No 5034083

To upgrade loader package when ErgoDrive listed add £500

or when HK listed add £300

To upgrade loader package when ErgoDrive listed add £800

or when HK listed add £600

Price

Couplers

Do

you

need

a C

onve

rsio

n K

it fo

r you

r loa

der o

r tra

ctor

?

LCS MultiCoupler MC4Single multicoupler for

LCS control valve. Mounts directly to control valve, incorporates electrical

connector

Part number5220530

CANbus Electro-Hydraulic Valve Retro fit Options

Price £120 Price £150

ErgoDrive LCS Kits

£1,075

Electric Joystick and Control Valve

Monolever and Control Valve

Monolever c/w 3rd service and electric Softdrive switch

MC4 replaces individual flat face couplers

LCS EasyDriveCANbus Electro-Hydraulic Valves

LCS ElectroDrive Professional Standard Hose Sets

Price £295

Standard kit connects to aux' valve including

mid-mount valves.May require additional

components from tractor manufacturer.

Price £1,575 Price

You can adapt EasyDrive to operate a front linkage.

EasyDrive LCS has similar functions as

ErgoDrive plus Bucket Shake.Kits include joystick mounting brackets.

£1,875Price £575

Loader hoses connect via individual flat face couplers

Tortoise mode, Bucket shake, Visual AAC, On/Off 3rd service, Locked 3rd service

function, Continuous 3rd service function, Fast function, 3rd service speed configuration, Programmable quick

select button plus more configuration settings..

For the professional user If available for your tractor

Deluxe Hose SetsRelay Kit for high current solenoids Low Hydraulic Flow Accumulator If available for your tractor

Relay Kit to operate higher current 3rd/4th service

diverter valves in conjunction with LCS EasyDrive or

ElectroDrive

For EasyDrive and ElectroDrive Operates via the tractors

own armrest joystick.May require additional

components from tractor manufacturer.Consists of -

Diverter valve, hoses, switches, harness

This accumulator kit must be ordered for tractors that have

low hydraulic flow1. Transferring pre-2005 loaders on to new tractor.

2. Operating additional diverter on 3 point linkage

Price £1,275

Valve type above, may not be as shown for your tractor

Individual couplers are supplied standard with new loaders

6

Or

Or

What is Live 3

SPECIAL ORDER ONLYElectroDrive Pro, Live3

c/w Hose kit* with individual couplers

Live3 enables the operator to use the loader's implement cylinders and the 3rd service

simultaneously, so you can open and close the implement while tipping and crowding. This

decreases working time when operating with hydraulic implements. Some 3rd service fuctions

not available with Live3

Price

Part number5034283

Price Contact Alo UK

Live 3 - simultaneous tip/crowd 3rd service operation

Live3 is only available in conjuction with latest LCS ElectroDrive Professional

system.Contact Alo UK for more

info

LCS ElectroDrive c/w Live 3

Live 3 Pricing

£2,755

Live3 valve c/w Hose kit* with individual couplers

Live3 valve c/w Hose kit* with Multicoupler MC2**

Retro Fit Live3

*Order hose set

1. Hose kit as a retro fit kit. Hose kit is ordered as per

loader model.

2. Order loader with hose set pre-installed in loader

beam

Price Contact Alo UK

Retro fit Live3 is only compatable with and

existing LCS ElectroDrive Professional which has

Live3 electrical connection on the master unit.

Contact Alo UK

LCS MultiCoupler MC2**

Part number5220541

Not required if ordered with hose kit (as above**) Price £215

Loader comes c/w all Live 3 hoses factory * installed (when ordered as a package).ElectroDrive Professional Live 3

valve set mounts to the tractor in the same way as the standard LCS ElectroDrive valve

Single multicoupler for Live3 valve. Mounts

directly to Live3 valve, incorporates electrical

connector

£2,905

What you getLCS ElectroDrive Professional c/w Live 3 valvetogether with specific hose kit for your loader

model.The standard 3rd service is not required with Live 3

ElectroDrive Pro, Live3 c/w Hose kit* with

Multicoupler MC2**

7

Operation mode 1

Operation mode 2

Operation mode 3

The following functions will not operate with HBP -SoftDrive (all LCS systems)

Float function (all LCS systems)New AAC Sensor (ElectroDrive) [loader lowering,

bucket return works] Bucket shake (ElectroDrive)

Hose Burst Protection

Part No 5220738 Part No 5220850

Price £165 Price £900

AAC Sensor

SafeThe bucket movement and loader beam movement are programmed to be synchronised. First, the bucket moves into the pre-set position (set time between 1 to 8 sec). After the bucket has reached the pre-set position, the loader beam will start lowering.

SingleThe bucket will move to the pre-set position, either from dumped or from rolled-back position.The loader beam will not move during the bucket movement.

Only for LCS ElectroDrive Professional from serial no: 40632 and new joystick version from P/N 5101130 >

Specialist EquipmentAAC Sensor (ElectroDrive Pro only) Hose Burst Protection

The sensor controlled AAC (Automatic Angle Control) enables the driver to automatically return the implement to a preset tilt angle.

The Hose Burst Protection kit (HBP) prevents unintentional dropping of the loader or implement in the event of hydraulic hose failure.

Will only mount to premium series loader modelsOne kit mounts to all loader models. Retrospective fit/dealer installation

Designed according to Agricultural machinery – Front loader – Safety standard EN12525:2000+A2:2010

Quick

Lower the loader beam and the bucket willreturn to the pre-set position.

Showing positions of “hold” valves on cylinders.

8

1 4

Part No 5034021 Part No 5034067

2 5

Part No 5034071 Part No 5033973

3 6

Part No 5044970 Part No 5033977

This kit allows LCS Quicke Dimension loaders to mount

onto the previous valve system using ½” quick

release couplings.

Allows LCS loader with Multicoupler and flat face

individual couplers to connect to an existing valve type.

Ideal when using one loader on two tractors - 1 x pre-LCS and

one x LCS. Kit. Kit 1 or 2 also required

Control Valve Conversions Kits

Individual Coupler Kit

Multicoupler Kit

Hose Interface Kit

Pre-LCS LOADER ONTO LCS HYDRAULICS (Old loader to new valve)

LCS LOADER ONTO pre-LCS HYDRAULICS (New loader to old valve) LCS LOADER ONTO pre-LCS HOSE SET (New loader to old valve)Old style 1/2" male coupling interface

This kit allows LCS Quicke Dimension loaders to mount onto the Pre-LCS hose sets using the Multicoupler MC4

and individual flat face couplers.

Female 7 pin - Male multi pin

Flat face female couplings and male Deutsch plug

1/2" female couplings and male 7 pin plug

½” Coupler Kit

Female 7 pin - Male multi pin

£125Price

Male 7 pin - Female multi pinOld style Walvoil or Nord Hydraulic control valve

This kit allows pre-LCS Quicke Dimension loaders to

mount onto the LCS valve system using the

Multicoupler MC4

£295Price

Price £225

Price £295Valve not inc'.

Interface Kit

This kit allows pre-LCS Quicke Dimension loaders to

mount onto the LCS valve system using individual flat

face couplers

This kit allows LCS version Quicke Dimension loaders to

mount onto the previous valve system fitted with Hydro

Quick/MultiDoc.

Male 7 pin - Female multi pin

£80Price Price £195

Hydro Quick Coupler Kit

to fit to

to fit to

Updateto

A 9

(a) 5215241 Part No PricePrice £450 (b) 5220526 5220576 £150

5220450 DS 5220519 DS5220451 DM 5220518 DM5220452 DL 5220517 DL

Part No Price5220293 £65 Price £250 Price £375

Part No Price313411 £120 5048217 £295

QD Loader OptionsSoftDrive c/w Electric Shut Off SoftDrive Electric Control Additional SoftDrive Kit

Required Informationserial number or

loader model, loader widthloader age if LCS ready

Includes - accumulators and In cab electric shutoff

solenoid kit

In cab electric shutoff solenoid kit

(for Dimension series loaders with existing manual control

SoftDrive)

(a) Pre LCS, (b) LCS loaders Additional SoftDrive kit for older Quicke Dimension

loaders Q20 - Q85X loadersMounts in conjuction with existing kit.

Retrospective fitmentRetrospective fitment £125

4th service valve and hoses to tool carrier

Retrospective fitmentRetrospective fit Retrospective fit

SoftDrive 3rd Service Options 4th Service Kit

Retrospective fit

Rocker switch kit to activate SoftDrive on a second tractor

Only required if joystick in second tractor does not have

SoftDrive "toggle" switch.

Standard fitment(LCS ready loaders)

See Other Options page for older loader options

Coloured loadersPlease check for colour

availability with your Alo UK Area Manager.

Coloured Q-Link£100

Coloured Loader

£200

Separate 3rd Service Handle Loader Lights

When loader is operated by tractor

auxilary valve mechanical lever, via

hose kit option

Additional lights for your Quicke loader which are

integrated under the knee plates to follow the position of

the loader beam.(Cannot be used in conjuction with

4th service)

c/w control knob clamp, 7 pin plug and bracket.

LED loader illumination kit for dealer installation.

4th service cannot be used in conjunction with ESVDoes not

include joystick

10

Price £200 5201251 £400 Price £200 5201318 £400

Price £200 830585 £400 Price £200 830600 £400

5220693 Euro 85220699 Euro + 55220704 Euro + 35220708 Euro + MX (a) 5201088

Retrospective fit Price £450 Retrospective fit (b) 5033992

See Other Options page for older loader options

(a) Pre LCS, (b) LCS loaders

Alo No 3 Connection Options Trima No 5 (SMS) Connection Options

Mailleux/MX Connection Options Faucheux/McConnel Connection Options

Hydraulic Locking - Q Lock.

Trima No 5 implements

Euro-Combi 8 + MX

Mailleux/MX Implements

Euro-Combi 8 + FX

Faucheuximplements

Will fit Euro No 8 implement hooks

and MX implement hooks.

DM width only

*Factory fit tool carrier


and Alo No 3 implement hooks.


Will fit from Euro No 8 tool carrier

to Alo No 3 implement hooks.

Will fit Euro No 8 implement hooks and Trima No 5

(SMS) implement hooks

QD Loader Tool Carrier/Adapter Options

Euro-Combi 8 + 3 Alo No 3 Implements Euro-Combi 8 + 5


Will fit from Euro No 8 tool carrierto Trima No 5

hooks.Retrospective fit adapterRetrospective fit adapter

*Note - Tool carrier prices are for 'Factory Fitment' or 'Special Order'. Tool carriers ordered after delivery incur additional costs.

*Note - Tool carrier prices are for 'Factory Fitment' or 'Special Order'. Tool carriers ordered after delivery incur additional costs.

Part Nos listed are for DM width loaders and LCS

ready loaders

Switch Kit Rocker switch kit to activate Q-Lock on a

second tractor

Retrospective fit adapter


and Faucheux implement hooks

DM width only

Will fit from Euro No 8 tool carrier to Faucheux (McConnel)implement hooks.

*Special order tool carrier Retrospective fit adapter

Will fit from Euro No 8 tool carrierto Mailleux/MX

implement hooks.

Selecto Fix OptionsImplement PartLoader Part

Coupler connectedto implement hoses.

Quick coupling mountsto tool carrier. 3/8"

£60

Flat face easy to clean

£50 10550380 £250 10550180

Loader requires 3rd

service

11

1 2 3

Q755 4500123Q770 4500124Q950 4500063Q960 Q970 4500064Q980 4500065

Part No Price Q985 4500066

Price £0 60008211 £17 each Price £895

4 5 6

5201154 £395Part No Price

Q310 upto 670 * 3140105201155 £265 Q465 675 695 * 314070

Q720 750 910-940 960 1060 ** 5048136Part No Price Q760 770 950 970-990 10 ** 5048137

5201227 £195 10301570 £90 Other Loader makes 314100

97 8

Part No Price Part No PriceQ230, 330 & 430 313403 Q230, 330 & 430 313404 Euro Combi 246799Q310 340 415 445 450 600 313413 Q310 340 415 445 450 600 313414 Euro No 8 246800Q675 695 700 900 10 10550218 Q675 695 700 900 10 series 313325 £295 E/C 8-5-3 300 to 10 series

4th service required at extra cost (See No 8 )

Hydraulic Locking

Single action multi coupler

Valve Part

* On L/H bearing box** Mounted to crosstube

Complete For use with allhose kit options.

(requires 5201154Hydro Quick).

Does not include Hydro Quick valve

Older loader Series

£450

Other Optional Equipment

Shock Absorbers (older loaders)

DM Subframe Lock & Go ActivatorsQD Loader Bearing Boxes

Factory fitment

DM Bearing Boxes ConversionLCS Conversion maybe rqd'

Extended

No Extra Cost when ordered with new loader

Only for specified loadersExtra cost applied when

ordered after delivery POA .

Activators for Delta subframe on second tractor. 2 required.

↓Older loader options ↓

Note:Activators do not come with

new subframes.

Hydro Quick Pre LCS Hydro Quick Bracket Set Pre LCS

Retrospective fit

Older loader options

Half option

£450

Loader PartHalf option

Hydraulic Services Pre-Dimension loaders

700 series up to 10 series

Solenoid 4th Service kit complete

3rd Service

£495

4th Service

Older loader Series

£495

Solenoid 3rd Service kit complete

Older loader Series

Parallel loaders only

Converts 700/900 UM to mount to DM

Does not include Hydro Quick valve part

Will not fit to LCS valve

12

Type

Width

Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →

Tractor model NBMax front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt

X 6,540 7,040 7,740 7,790 SX OC

X 7,740 8,290 8,990 SX OC

X 7,040 8,290 8,790 DM OC

16,9 x 24 7,040 7,740 8,290 8,590 8,790 DM LS

16,9 x 28 8,540 9,790 10,090 10,390 DM LS

A, F 12,4 x 24 6,540 6,840 7,790 8,090 8,190 DM OC LS

A, F 380/70 R24 7,040 7,740 8,190 8,290 8,590 8,790 8,990 DM OC LS

F 540/65 R24 7,740 8,540 8,990 9,290 9,790 DM OC LS

F 540/65 R28 8,540 9,790 10,090 10,390 DM OC LS

D 480/70 R30 9,790 10,090 10,390 DM LS HK

480/70 R30 10,390 DM LS HK

D, L 480/70 R30 9,990 10,290 10,590 DM HK EY

L 480/70 R30 10,590 DM HK EY

A 12.4 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC

A 13.6 x 24 6,840 7,040 7,740 8,090 8,190 8,290 8,590 8,790 8,990 DM OC

A 11.2 R24 6,540 7,790 DM OC

R 11.2 x R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 14,9 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

M, Q, S 280/85 R24 6,540 7,790 DM OC

Q, S 14,9 x 24 6,540 6,840 7,790 8,190 DM OC

A, N 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS

A, P 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS EY

A 11,2 x 24 6,540 7,790 DM OC

A 13,6 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 14,9 x 24 7,040 7,740 8,190 8,290 8,590 8,790 DM OC

A DMX subframe priced as DM M Subframe will fit with Folger front linkage Q State if front axle support is cast or welded.D Q66 must have extended bearing boxes. N ErgoDrive will not fit with mid-mount valve R Subframe designed for tier 3 tractorsF Check tractor hydraulic system - LS or OC P ErgoDrive not available S Serial Number of tractor requiredL HK requires loader interface prep (tier 3) CNH 8110-330489 or special HK with front hitch X US subframe - NOT DM Lock & Go* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Prices - £ Sterling

Hyd

raul

ic

Opt

ion

956, 1056 XL CMFD

Case IH

Subf

ram

e

785, 885, 985, 795, 895, 995, 4220 - 4240

PARALLELNON-PARALLEL

Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)

DM DM

JX 95 and Tier 3

CS 68, CS 75

5120 (Maxxum)

CVX 140, 150, Tier 3 Models (Steyr)

CS 100, CS 110

CS 78, 80, 86, 90, 94, and 85, 95, 100, 105 pro

JX 75, JX 80, JX 85, JX 90 and Tier 3

CVX 160, 175, 195 Tier 3 Models (Steyr)

CX 95 - 105

JX 55 - JX 70 and Tier 3

Farmall 55C, 65C, 75C

5130 - 5250 (Maxxum)

Farmall 95U, 105U, 115U

Farmall 85A, 95A, 105A, 115A

Farmall 75A. 90A, 100A, 110A

844, 856XL CMFD

CVX 120, 130, 150, 1135, 1145, 1155 (Steyr)

CS 120, CS 130, CS 150

Also check out the Versa-X range Also check out the Versa-X rangeFarmall 65A 75A

CX 70 - CX 85

Also check out the Versa-X range




CVX 170, 195, 1170, 1190 (Steyr)

Farmall 85C, 95C and 105C EP

Farmall 95U Pro, 105U Pro, 115U Pro

13

Type

Width



A 320/70 R24 6,540 7,790 8190 DM OC

A 13,6 x 24 6,540 6,840 7,040 7,740 7,790 8090 8190 8290 8790 DM OC

A 540/65 R24 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,790 DM OC

C, G, H, K, T 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DM HK LS

C, G, H, K, T 480/65 R28 7,940 8,740 9,190 9,490 9,990 DM HK LS

H, K, T 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS

H, K, T 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DM HK LS

H, K, T 14,9 x 28 7,740 8,540 8,990 9,290 9,790 DM LS

H, K, T 14,9 x 28 7,940 8,740 9,190 9,490 9,990 DM HK LS

H, K, T 540/65 R28 7,940 8,740 9,190 9,490 9,990 DM HK LS

B, G 16,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM LS

B, G 480/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

B,G 540/65 R30 10,390 10,690 DM LS

G 540/65 R28 8,740 9,990 10,290 10,590 10,890 DMX LS

G 540/65 R28 10,590 10,890 DMX LS

C, E G, H 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

C, G, H 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC

J, K,T 540/65 R28 8,740 9,990 10,290 10,590 DM HK EY

J, K,T 600/65 R28 8,740 9,990 10,290 10,590 DM HK EY

K, T, U 600/65 R28 9,040 10,290 10,590 10,890 DM EY E

K, T, U 600/65 R28 10,890 11,190 DM EY E

J, K, T 600/65 R28 10,590 10,890 DM HK EY

A DMX subframe priced as DM G Will not fit tractors with wide weight carrier T Order loader ready harness from CNH harness #84167030 and 2 relays #82017871.B Tractor must be equipped with power beyond plate H Deluxe Hose kit only with Multi Controller arm rest U Hydraulic sets do not fit tractors with mid-mount valve. Use standard hose setC Additional kit 10377122 req'd for axle suspension J Deluxe hose kit and hose kit for factory fitted mid-mount valve available. E Check type of front hitch mounted to tractor K Tractor must be ordered with loader ready Multi Controller joystick* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

JXC 1060 - JXC 1095, Quantum 65C - 95C

JXU 70 - JXU 115

Case IHPrices - £ SterlingNON-PARALLEL

Hyd

raul

ic

Opt

ion

Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only) Subf

ram

e

Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)

PARALLELDM DM

MAXXUM 115, 125, 140 Standard 6 cyl EP

MAXXUM 110, 120, 130 MC and CVX 4 cyl EP

MAXXUM 115, 125, 140 M/controller 6 cyl EP

MX 150, MX 170

PUMA 180, 185, 195, 200, 210, 215, 225, 230 + CVX + Multicontroller

PUMA 150, 165, 175 and CVX Tier 4B

PUMA 185, 200, 220 EP & CVX, 240 CVX T4B

MAXXUM 115, 125, 135, 145, 150 M/C CVT T4B

JXU 1070 - JXU 1100

MAXXUM 100, 110, 120, 130 MC, X Line 4 cyl

PUMA 155, 160, 165, 170 + CVX + Multicontroller

MXU 115, MXU 125, MXU 130, MXU 135 + X Line

MXM 120, MXM 130, MXM 140, MXM 155

MXU 100, MXU 110 + X Line

MXM 175, MXM 190

MX 100, MX 110, MX 120, MX 135

MX 80c, MX 90c, MX 100c

PUMA 115, 125, 130, 140, 145 + CVX + Multicontroller

MAXXUM 115, 125, 140 MC and X Line 6 cyl

MAXXUM 110, 120, 130 standard 4 cyl EP

14

Type

Width



X 6,540 7,040 7,790 8,290 8,990 SX OC

X 6,540 7,040 8,290 8,990 SX OC

C 440/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

C, H 440/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

B, C, D 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC

C, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC

A 16,9 x 30 10,590 10,890 DMX LS

G, J 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK

G 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK

E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC

L, M, N 480/65 R28 7,740 8,290 8,590 8,790 8,990 9,290 DM LS HK

E 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC

L, M 480/65 R28 9,040 10,290 10,590 10,890 DM EY HK

Q 360/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

Q 420/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

F 600/70 R28 11,090 11,390 DMX EY HK

F 600/70 R28 Turn to Q88/Q98 page

G 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

A, G 440/65R28 7,040 7,740 8,290 8,590 8,790 DM OC

K 320/85 R20 6,540 7,790 8,190 DM OC

K, P 320/85 R20 6,540 7,790 8,190 DM OC

280/70 R18 6,540 7,790 8,190 DM OC

280/70 R20 6,540 7,790 8,190 DM OC

A Will fit with Lemoine front hitch. Will also fit w/o front hitch F Deluxe hose set will only mount to tractor with Bosch hydraulics M Deluxe hose set will not fit with hydraulically extendable trailer hitchB If tractor has original 3.5T front hitch, order DM subframe only G DMX subframe priced as DM N Q46/Q48 must be ordered with extended bearing boxes with front hitch.C Subframe prepared with spacers for front hitch H Check if tractor has Arion style hydraulic system P The hydraulic set will not fit tractors with electro hydraulic valve.D If 3.5 T front hitch mounted, contact Alo UK J Hose kit mounts to midmount valve and electric joystick. Q Order Q36/Q38 with long bearing boxes for tractors with wheels larger than 420/70 R24.E Check if load sensing and or open centre L Check if tractor is fitted with factory fitted siderails X US subframe - NOT DM Lock & Go* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200





DMClaas

Arion 610, 620, 630, 640 CIS/CEBIS


Axion 810, 820, 830, 840, 850 CIS/CEBIS/C-MATIC

Ceres 75 - 95X (JD engine)

Ceres 75X, 85X 95X

Ares 816, 826, 836

Arion 510, 520, 530, 540 CIS/CEBIS

Arion 410, 420, 430

NON-PARALLEL

Atos 220, 230, 240

Ares 546, 556, 566

Celtis 426, 436, 446, 456

Nectis 217, 227, 237, 257, 267, VL

Ares 547, 557, 567, 577

Ares 616, 626, 636, 656, 696

Ares 617, 657, 697

Arion 620, 630, 640 650 CIS/CEBIS Tier 4i

Arion 530, 540, 550 CIS/CEBIS Tier 4i

Elios 210, 220, 230 and 240 Tier4i

Arion 410, 420, 430, 440, 450, 460 Tier 4

Elios 210, 220, 230 Tier 3

Axos 310, 320, 330, 340

Atos 330, 340, 350

Nectis 227, 247, 257, 267 F

Axion 810, 830, 840, 850 C-MATIC and HEXASHIFT Tier 4

Hyd

raul

ic

Opt

ion


Subf

ram

e

PARALLEL

Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)

DM

15

Type

Width



H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM OC

H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM OC

H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM LS HK

K, M 280/85 R20 DSX OC

K 320/70 R20 DSX OC

L 320/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

K, S 11.2 R24 6,540 7,790 8,190 DM OC

420/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

320 70 R24 6,540 7,790 DSX OC

N, P 320/85 R20 6,540 7,790 DM OC

R 480/70 R28 7,740 8,540 8,990 9,290 9,790 DM OC

13.6 x 24 7,740 8,990 DM OC

16.9 x 26 7,740 8,540 8,990 9,290 9,790 10,090 DM OC

A 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS OC

13.6 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM LS

16.9 x 26 7,740 8,540 8,990 9,290 9,790 10,090 DM LS

540/65 R28 8,540 9,790 10,090 10,390 10,690 DM OC

C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

B 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

A Check tractor hydraulic system - LS or OC. L If tractor has Lochmann cab contact your area manager HK Deluxe hose kit only (Ergodrive not available)B Adapted for engine type BF6M1013EC M Subframe will fit Agrolux 60, 70 manufactured after 1st Jan 2008 - Power Beyond plate may be required from Deutz on some modelsC Adapted for engine type BF6M2012C N Order aditional set 10412460 for tractor c/w air brakes (extra cost)H Q36/Q38 requires extended bearing boxes R Dynamic mudguards onlyK 4WD tractors only S Will fit tractors with 2 point foldable ROPS or Lochmann cab.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Use the Versa-X range


Check out the Versa-X range Also check out the Versa-X range


Agrotron 120, 130, 140, 150, 155, 165 MkI & MkII

Agrotron 120, 150, 165 MkIII



Agrolux 57, 67

Agrolux 77, 87, 97

Agrotrac 610, 620

Agrotron 4.70, 4.80, 4.85, 4.90, 4.95

Agrotron 6.00, 6.01, 6.05, 6.15

Agrotron 6.20, 6.30, 6.45

Agrotron 80, 85, 90, 100

Agrotron 105, 106, 108, 110, 118, 128

Agroplus 310, 315, 320, 410, 420 & Ecoline

Agrolux 4.75, 410

Agroplus 75, 85, 95, 100

Hyd

raul

ic

Opt

ion


PARALLEL Prices - £ Sterling

Subf

ram

e

DM DM

Agrofarm 85, 100

Agrofarm 420, 430 Profiline and TTV

DeutzNON-PARALLEL

Agroplus 67, 77, 87

Agrofarm 410, 420, 430

Agrolux 45, 55, 60, 65, 70, 310, 320

Check out the Versa-X range



16

Type

Width



F 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

E 540/65 R28 10,890 11,190 DM EY

C 540/65 R28 8,540 8,990 9,290 9,790 10,090 DM LS EY

G 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

G 7,740 8,540 8,990 9,290 9,790 DM LS OC

G, J 540/65 R34 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

G, J 540/65 R34 7,740 8,540 8,990 9,290 9,790 DM LS HK

G 540/65 R28 8,540 8,990 9,290 9,790 DM LS HK

E 540/65 R34 10,890 DM EY E

J, M 540/65 R34 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY OC

D, E 540/65 R28 8,740 9,990 10,290 10,590 DM HK

600/70 R30 Turn to Q88/Q98 pageJ, Q,

TU

560/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

J, Q 560/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC EY

J, Q, X 360/70 R20 6,540 7,790 DM OC EY

W 360/70 R20 6,540 7,790 DM OC EY

H 560/85 R28 7,040 7,790 8,090 8,290 8,790 DM OC EY

J, T, UV 540/65 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS EY

E, G, V 540/65 R24 7,540 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY HK

E, J, U 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS EY

E 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY E

E, J, U 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY

E 540/65 R28 9,040 10,290 10,590 10,890 DM EY E

A Check tractor hydraulic system - LS or OC. H Q36/Q38 requires extended bearing boxes U State pump flow rateD Std hose kit available J Order accumulator kit 5034083 with EasyElectroDrive (£150) V If Sauter front hitch fitted, order kit 10418625 at £150E ErgoDrive not available M Subframe will fit Agrolux 60, 70 manufactured after 1st Jan 2008 W Subframe not adapted for under slung (horizontal) exhaust pipe.F If Sauter front hitch fitted, order kit 10418133 at £150 Q Order kit 5034301 for tractors with original front hitch. X Not adapted with underslung exhaustG Electric or Deluxe hose kit only on Profiline L/S verion T Tractors w/o power beyond, order shuttle valve for LS signal. Order from SDF. Ref no: 2.3729.686.0 - Power Beyond plate may be required from Deutz on some models* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200



Agrotron M600, M610, M615, M620, M625

Agrotron M640

Agrotron TTV 1130, 1145, 1160, TTV610, 620



6180, 6190

6180P, 6190P

6140, 6150, 6160

6140, 6150, 6160 Profiline and TTV

Agrotron TTV 630, TTV7210, TTV7230, TTV7250

5100, 5110, 5120, 5130 Basic, Profiline

6120.4, 6130.4, 6140.4, 6150.4, 6160.4 P and TTV

5090.4G, 5105.4G, 5115.4G

Deutz

Agrotron 180.7

Agrotron 120, 130, 150 and Profiline

Agrotron 150.7, 165.7

5080D, 5090D and Ecoline

5090C, 5100C, 5110C

6120.4, 6130.4, 6140.4, 6150.4, 6160.4

Agrotron K90, K100, K120 and K410, K420, K430

Agrotron K110 and K610

Agrotron M650

Agrotron M410, M420

Agrotron TTV410, TTV420, TTV430

5090.4 D, 5090.4 D Ecoline and 5100.4 D


Hyd

raul

ic

Opt

ion

Subf

ram

e

NON-PARALLEL

Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)

PARALLELDM DM

17

Type

Width



405/70 R20 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS

13.6 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

480/70 R28 8,540 8,990 9,290 9,790 DM OC

405/70 R20 7,040 7,740 8,290 8,590 8,790 8,990 DM LS

405/70 R20 6,540 7,790 8,190 DM LS HK

6,540 6,840 7,040 7,790 8,190 8,290 8,790 DM LS HK

C 13.6 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK

C, F 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK

C, F 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK

C, F, N 540/65 R24 7,540 8,240 8,790 9,090 9,290 9,490 DM EY HK

A, B, H 480/65 R24 7,740 8,990 DM LS HK

A, B, H 540/65 R26 7,740 8,990 9,290 9,790 DM LS HK

540/65 R28 7,940 9,190 9,490 9,990 DM HK EY

H 540/65 R30 8,740 9,990 10,290 10,590 DM HK LS

H 540/65 R30 8,740 10,590 10,890 DM HK LS

M 540/65 R30 9,990 10,290 10,590 10,890 DM HK EY

M 600/60 R30 10,590 10,890 DM HK EY

H, K 540/65 R30 10,590 10,890 DM HK LS

Turn to Q88/Q98 page

Turn to Q88/Q98 page

A Remove front hitch arms when using loader H Fendt CANbus harness required on tier 3 version tractors for 3rd/4th service. 0074.020.208.000B State if tractor is equipped with air tank (for hose kit) J Will only mount to Profi, Profi Plus models M Order 14326171 kit with Special Hose Kit if tractor has 4 hyd outlets below grille (extra cost)C Use counterweight in combination with Q51 or Q56 K 2 front spools required with hose set N The Easy/ElectroDrive will not fit tractors without rear LS & P-connection.F Hose kit adapted to mount to Fendt mullti coupler. L Power beyond required with ElectroDrive* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200


718 Vario

916, 920, 924, 926, 930 Vario

Fendt

409, 410, 411, 412

307C, 308C, 309C

714, 716, 718 Vario SCR

309, 310, 311, 312, 313 Vario SCR

512, 513, 514, 516 Vario SCR

310, 311, 312, 313 Vario Tier 4

DMPrices - £ Sterling

Subf

ram

e

Hyd

raul

ic

Opt

ion

NON-PARALLEL


PARALLEL


DM

206S, 207S, 208P, 209P, 210P, 211P

Farmer 304, 305, 306, 307, 308 LS/LSA

Farmer 309, 310 LS/LSA

Favorit 509, 510C

411, 412, 413, 414, 415 Vario

Farmer 311, 312

720, 722, 724 Vario SCR

815, 817, 818, 820 Vario

711, 712, 714, 716 Vario

819, 822, 824, 826, 828 Vario SCR

No subframes available for 900 SCR series.

309, 310, 311, 312, 313 Vario

207, 208, 209, 210, 211Vario

18

Type

Width US USModel Q31 Q33 Q41 Q51 Q36 Q38 Q46 Q48 Q49 Q56 Q66 Q76

Std Equip' →

Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,120 5,420 5,620 5,920 6,120 6,320 7,120 7,720 Std Opt

X 11,2 x 24 6,540 7,790 S OC

X 6,540 7,790 SX OC

X SX OC

X 11,2 x 25 6,540 7,790 SX OC

X 6,540 7,040 7,790 SX OC

X 12,4 x 24 6,540 7,790 SX OC

X 6,540 7,040 7,790 8,290 SX OC

X 13,6 x 24 6,540 7,040 7,790 8,290 SX OC

14,9 x 24 7,040 8,290 SX OC

14,9 x 24 7,740 8,990 SX OC

14,9 x 28 9,990 10,590 MX OC

14,9 x 28 10,590 MX OC

14,9 x 28 7,740 8,990 SX OC

X S OC

X 6,540 7,790 SX OC

X 12,2 x 24 SX OC

X 6,540 7,040 7,790 8,290 SX OC

X 6,540 7,040 7,790 8,290 SX OC

X 13,6 x 28 7,040 7,740 7,790 8,290 8,990 SX OC

X 13,6 x 28 7,740 8,290 8,990 SX OC

X 7,740 8,290 8,990 SX OC

X US and UM subframe - NOT DM Lock & Go

* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3 and 8 + 5 add £200








Ford

60-66, 60-76, 60-86, 70-66, 70-76, 72-86DT/LP/DTF, 80-66DTF, 80-76DTF, 82-86DT/LP/DTF

65-46, 65-56 and 70-56

65-88 and 65-93

65-94, 82-94 and 88-94

70-88, 72-93, 80-88 and 82-93

160-90

Fiat

F 100, 110, 115, 120, 130 and 140

UM

Hyd

raul

ic

Opt

ion

55-90, 60-90 and 65-90

115-90, 130-90 and 140-90

60-66, 65-66, 70-66 and 80-66

100-90 and 110-90

90-90

70-90, 80-90 and 85-90

US


Euro tool carrier c/w clic on, 3rd service





Subf

ram

eFiat & Ford PARALLELNON-PARALLEL

7810

4630, 4830, 5030

3430, 3930, 4130

4610 4wd

6810, 7610, 7710

5000, 6600, 5110, 5610, 6410, 6610 4wd

6410, 6610 4wd

6710, 7000, 7410, 7600

19

Type

Width



A, B, C 540/65 R34 10,590 10,890 11,190 DM E EY

A Subframe kit WITHOUT grill guard.B Subframe set fits tractors with or without original front linkage.C ElectroDrive Professional is the official recommendation.D Order tractor with high visibility roof* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200


Sub

fram

e

Hyd

raul

ic

Opt

ion


Fastrac 4160, 4190 and 4220

JCBNON-PARALLEL PARALLEL

DM DM

20

Type

Width



X 6,540 7,040 7,740 7,790 8,290 8,990 SX OC

X 7,740 8,990 SX OC

X 6,540 7,790 SX OC

7,040 7,240 7,990 8,290 8,390 8,490 8,790 8,990 DMX OC

D 320/70 R24 DM OC

D 320/70 R24 6,540 7,790 8,190 DM OC

C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM LS

A 320/85 R24 6,540 7,790 DM LS

6,540 7,790 8,190 DM LS

C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM oc

380/85 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM oc

C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM LS

B 14,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 9,290 DM LS

B 14,9 x 24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS

540/65 R28 8,540 9,790 10,090 10,390 DM LS

A 540/65 R28 8,540 9,790 10,090 10,390 DM LS

A Power beyond plate maybe required F Q36 requires extended bearing boxesB Q46 may require extended bearing boxes depending on tyre size.C Additional drawbar bracket kit 10386279 maybe required (extra cost) X US subframe - NOT DM Lock & GoD Will mount to 24/12 transmission.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Hyd

raul

ic

Opt

ion

JohnDeere

2650, 2850

3350, 3650

5500 - 5510



NON-PARALLEL PARALLEL

Subf

ram

e

DM DM

6500, 6510, 6600, 6610, 6800, 6810, 6900, 6910

6715


6010, 6100, 6110, 6200, 6210,

5620, 5720, 5820

5070M, 5080M, 5090M, 5100M

5080R, 5090R, 5100R

5215, 5315

3200, 3210, 3300, 3310, 3400, 3410

5055E, 5065E, 5075E

5075M, 5085M, 5100M, 5115M (US built)

5080G, 5090G


Also check out the Versa-X range Also check out the Versa-X range

Use the Versa-X rangeUse the Versa-X range

5415, 5515

6300, 6310, 6400, 6410

21

Type

Width



A, B, C 540/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK

A, B,C, H 540/65 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK

C, H 540/65 R28 8,540 9,790 10,090 10,390 DM LS HK

B, C, E,G, H 16.9 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK

C, E, G, H 420/70 R28 8,540 9,790 10,090 10,390 DM LS HK

C, E, G, H 16.9 R28 8,540 9,790 10,090 10,390 DM LS HK

B 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS

B 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS

B, H, J 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK

H, J, M 540/65 R28 8,540 9,790 10,090 10,390 DM LS E

B, H, J 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK

H, J 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY

H, L 540/65 R30 10,390 10,690 DM LS E

H, J 540/65 R30 10,390 10,690 DM LS EY

H, J 600/70 R28 10,390 10,690 DM LS EY

540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

540/65 R30 10,390 10,690 DM LS

C 540/65 R28 9,790 10,090 10,390 10,690 DM LS HK

600/70 R30 Turn to Q88 / Q98 page

540/65 R28 10,390 10,690 DM LS HK

600/70 R30 Turn to Q88 / Q98 pageA Power beyond plate maybe required G Non Premium tractors must be equipped with power beyond plate (order John Deere plate AL171838) B Q46 or Q48 may require extended bearing boxes depending on tyre size. H ErgoDrive will not fit if tractor has a Command Armrest. Use ElectroDriveC Additional drawbar bracket kit 10386279 maybe required (extra cost) J State it tractor is fitted with or without a front linkage.E If transfering hyd set from 6020 to 6030, an inline check valve is required (extra cost) M Q61 will not fit with La Forge front linkage* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Hyd

raul

ic

Opt

ion


JohnDeere

NON-PARALLEL PARALLEL Prices - £ Sterling

Subf

ram

e

DM DM

6120, 6215, 6220

6320, 6415, 6420,

6520, 6520, 6615, 6620, 6620, 6820, 6920 TLS

6130, 6230, 6330, 6430

6530, 6534, 6630

6090MC, 6100MC, 6110MC

6090RC, 6100RC, 6110RC

6830, 6930 TLS

6170R, 6190R, 6210R

6175, 6195M and R 6215R Tier 4

7730, 7830, 7930 and 7R and 8R

6110, 6120, 6130M and R T4F

6105, 6115, 6125M and R

6130, 6140, 6150M and R (medium)

7200, 7210, 7300, 7310, 7400, 7410, 7500, 7510

7600, 7610, 7700, 7710, 7800, 7810

7220, 7320, 7420, 7520

6135M, 6145, 6155M and R T4F (medium)

7720, 7820, 7920

7430, 7530

6170M, 6190M, 6210M

22

Type

Width



C 360/70 R20 DM OC

B 12.4 X 24 6,540 7,790 8,190 DM OC

B 12.4 X 24 6,540 7,790 8,190 DM OC

320/85 R20 DM OC

440/65 R24 6,540 6,840 7,790 8,190 DM OC

D 12.4 X 24 6,540 6,840 7,790 8,190 DM OC

A 13.6 X 24 7,040 8,290 8,790 DM OC

13.6 X 24 6,540 7,790 8,190 DM OC

A 13.6 X 24 7,040 8,290 8,790 DM OC

A 13.6 X 24 7,740 8,990 DM OC

A 420/70 R24 7,740 8,990 DM OC

A 420/70 R24 7,740 8,990 DM OC

340/85 R24 7,040 8,290 8,790 DM OC

420/70 R24 7,740 8,990 DM OC

E, FG, H 540/65R28 8,540 8,990 9,290 9,790 DM OC

A Pressure reducing 10377217 kit req'd E Confirm hydraulic pump typeB Subframe available for 2wd tractors F ErgoDrive will not fit tractors with large armrest, use Easy/ElectrDriveC Counterweight must be used with Q31 loader G If tractor is not equipped with loader ready mounts, order additional kit 60011324.D Hydraulic kit designed for tractors without trailer brake valve H If tractor is loader ready, order special hydraulic set 60012835 instead of std valve option (L/S only)* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

M 135GX

M7131, M7151, M7171

M 95S, M 105S

M 100GX, M 110GX

M 95S, M 105S

M 125X

M 128X

M 130X

M 108S

Hyd

raul

ic

Opt

ion

Subf

ram

e


Prices - £ SterlingPARALLELDM



NON-PARALLEL

M 8560, M 9960

ME 8200

ME 9000

M 8540, M 9540

KubotaME 5700

M 5040, 6040, 7040




DM

15Check out our full range later in this price list

H Series Bucket

Big Bag Lifter

Multipurpose 4 in 1 Bucket

Flexigrip

Silocut SG

Silograb

Remember to choose from ourrange of quality implements

24

Type

Width



X 6,540 7,040 7,740 7,790 8,290 SX OC

X 7,040 7,740 8,290 8,990 SX OC

X 6,540 SX OC

X 6,540 SX OC

D 320/85 R20 6,540 7,790 8,190 DM OC

420/70 R28 8,740 9,990 10,290 10,590 10,890 DMX OC

540/65 R28 10,590 10,890 DMX OC

420/70 R28 8,740 9,990 10,290 10,590 10,890 DMX OC

540/65 R28 10,590 10,890 DMX OC

8,740 9,990 10,290 10,590 10,890 DMX OC

8,740 9,990 10,290 10,590 10,890 DMX OC

14.9 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

7,940 8,740 9,190 9,490 9,990 10,290 DMX OC

C DM OC

C 12.4 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

B Turn to Q88 / Q98 pageB Easy/ElectroDrive only or Std hose kit only X US subframe - NOT DM Lock & GoC DMX subframe priced as DMD Q36/Q38 requires extended bearing boxes

* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Landpower 125, 135, 145

Landpower 165, 185


Use the Versa-X range Use the Versa-X range

Landpower 145 Tier 3

Landpower 165, 180 Tier 3

Alpine 65, 70, 75, 80 , 85 Std


Hyd

raul

ic

Opt

ion

Globus 65, 75, 80

Blizzard 85, 95T


LandiniPARALLEL

Subf

ram

e

Ghibli 80, 90, 100

Globus 55, 60, 70

NON-PARALLELDM DM

Legend 115, 120, 125, 130, 135 NG

Power Farm 60

Power Farm 75, 80, 85, 90, 95, 100, 105, 110

Legend 140, 145, 160, 165, 180, 185 NG

Powermaster 180, 200, 220

Mythos 115

Mythos 90, 100, 105

25

Type

Width



480/65 R24 7,940 8,740 9,190 9,490 9,990 DMX OC

DSX OC

D 300/70 R20 DM OC

D 300/70 R20 6,540 7,790 8,190 DM OC

6,740 7,040 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC

7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

405/70 R20 6,540 7,790 DM OC

340/85 R24 6,540 7,790 8,190 DM OC

6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS

480/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS

480/65 R24 7,740 8,540 8,990 9,290 9,790 DM OC LS

540/65 R28 8,540 9,790 10,090 10,390 DM LS

540/65 R28 10,290 10,590 10,890 DM EY

540/65 R30 10,890 11,190 DM EY

540/65 R30 10,390 10,690 DM LS

D Q36/Q38 requires extended bearing boxes

* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Vision 80, 85



DM DM




Technofarm 60, 70, 80

Technofarm 75, 85 Tier 2, 80 Tier 3

LandiniPowermondial 100, 110, 115, 120

Rex 75, 85, 95, 105 F/GE/GT Use the Versa-X range


Subf

ram

e

Hyd

raul

ic

Opt

ion


NON-PARALLEL PARALLEL

Vision 90, 100, 95, 105

4-60, 4-70, 4-75, 4-80

4-90, 4-100, 4-105

5H 80, 5H 90, 5H100, 5H 110, 5H 115

6-120C, 6-130C, 6.140C

6-145L, 6-160L, 6-175L

6-145, 6-160, 6-175

7-145, 7-165, 7-180, 7-185, 7-195, 7-205

7-175 T4i

7-190, 7-215 T4i

7-190, 7-210, 7-220, 7-230, 7-235

5-090 H, 5-100H, 5-110H, 5.115H + new cab


26

Type

Width



X 6,540 7,040 7,790 8,290 SX OC

X 6,540 7,790 8,290 SX OC

X 7,740 8,990 SX OC

14.9 R24 6,740 7,040 7,240 7,990 8,290 8,390 8,490 8,990 DMX OC

14.9 R24 6,740 7,040 7,240 7,990 8,290 8,390 8,490 8,990 DMX OC

14.9 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC

E 320/85 R20 6,540 7,790 8,190 DM OC

280/70 R20 DM OC

P DM OC

F 12.4 R24 DM OC

Q 320/70 R20 DM OC

420/70 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

13,6 R28 7,940 8,740 9,190 9,490 9,990 DMX OC

420/70 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

13,6 R28 7,940 8,740 9,190 9,490 9,990 DMX OC

E, G 480/65 R28 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A, J 14,9 x 28 6,740 7,040 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 DMX OC LS

A, H 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC LS

A, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 10,290 10,590 DMX LS OC

A, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC

A, H 16.9 R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC

7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC

7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

M 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC

M 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC EY

M, R 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC EY

A Lift arms on front hitch must be removed when using loader J Note maximum wheel size Q Subframe adapted for tractors produced after 2008 (T35019)E DMX subframe priced as DM M Check cab - Essential, Exclusif, Efficient for hyd type R If tractor has original front linkage, order 14326575.G Q36/Q38 must have extended bearing boxes. N ErgoDrive not available Exclusif and Efficient cabH Check transmission type P Subframe will not fit with underslung exhaust X US subframe - NOT DM Lock & Go* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

DM


5608, 5609

3625, 3635, 3640, 3645, 3650, 3655 and 3660 model F/S

3080, 3085, 3090, 3115, 3120, 3125, 6150

3050, 3065, 6110 - 6140 Steepnose

4435, 4445, 4455

5475 (T3)

5440, 5450

5425, 5425, 5435 + Steepnose

5410, 5420, 5430

5460 Sisu, 5465,(T2), 5470 (T2, T3), 5480 (T3)

5445, 5455, 5460 + Steepnose

5465 (T3)

4360, 4370

4260, 4270


MasseyFerguson



DMPrices - £ Sterling

Sub

fram

e

Hyd

raul

ic

Opt

ion

4225, 4235, 4245, 4255

6160, 6170, 6180

3070


375, 390, 398

2430, 2435, 2440

3050, 3065, 6110 - 6140


3615 Utility, 3625, 3635, 3645 Utility/A-series

410, 420, 430





5611, 5612, 5613

5610


3630 A, 3640 A and 3650 A

4325, 4335, 4345, 4355, 4365

27

Type

Width



540/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC LS

540/65 R28 7,940 8,740 9,190 9,490 9,990 DMX OC LS

540/65 R28 8,740 9,990 DMX OC LS

A, B, C 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC

A, B, C 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC

B, K, L 380/85 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC

A, B C, D 480/65 R28 7,940 8,740 9,190 9,490 9,990 10,290 10,590 DMX LS OC

B 14,9 x 28 8,740 9,990 10,290 10,590 DMX LS OC

A, B, C 480/65 R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC

A, C, D 480/70 R30 10,590 10,890 DMX LS

C 600/65 R28 10,590 10,890 DMX LS

14,9 x 28 7,940 8,740 9,190 9,490 9,990 DMX OC LS

M 14,9 x 28 8,440 9,240 9,690 9,990 10,490 DMX EY

A, B 480/65 R28 8,540 9,790 10,090 10,390 DM LS OC

A, B, D 480/65 R28 8,740 9,990 10,290 10,590 DMX LS OC

F 480/70 R30 10,590 10,890 DMX LS

A, D, F 480/70 R30 10,390 10,690 DM LS

A, D, F 480/70 R30 10,590 10,890 DMX LS

600/65 R28 10,590 10,890 DMX LS

M 16.9 R28 10,490 10,790 11,090 DMX EY E

M 16.9 R28 11,090 11,390 DMX EY E

M 600/65 R28 11,090 11,390 DMX EY E

470/70 R28 10,590 10,890 DMX LS

A Lift arms on front hitch must be removed when using loader F Check engine type - Tier 3B Check tractor hydraulic system - LS or OC K Check Serial NumberC Check transmission type - Dyna 6 trans' L Order additional kit 5033878 if tractor has water seperator D DM subframe for tractors with 3.5T linkage. M Check cab - Essential, Exclusive, Efficient for hyd type* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200


Sub

fram

e

Hyd

raul

ic

Opt

ion


PARALLELNON-PARALLELDM DM

6445, 6455 + Steepnose

MasseyFerguson

6497, 6499

6235, 6245, 6255, 6255, 6265 + Steepnose

6465, 6475, 6480 2.5T

6260, 6270, 6280

6290

6460, 6470 Dyna 6 T3 Sisu

6465, 6475, 6480 Dyna 6 T3 Sisu

6460, 6470 T2

6475, 6480

6485, 6490, 6495

6612, 6613, 6615 Dyna 4 Essential

6613 Dyna 6, 6614, 6615, 6616 Dyna 6 + VT

8210, 8220

7465, 7475, 7480

7497, 7499 Dyna VT

7465, 7475, 7480

7490, 7495

7485

7485, 7490, 7495

7619, 7620, 7622 Dyna 6 and Dyna-VT

7624, 7624 Dyna-VT, 7626 Dyna 6

7614, 7615 Dyna 4, 7615, 7916, 7618 Dyna 6 + VT

28

Type

Width



D 12.4 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

D 6,540 6,840 7,040 7,790 8,190 8,290 8,590 8,790 DM OC

D 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM OC

D, H 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM OC

6,540 DSX OC

6,540 DSX OC

A, BC, E 7,040 7,740 8,290 8,590 8,790 8,990 DM LS

BC, E 14.9 R28 7,740 8,990 9,290 DM LS

BC, E 14.9 R28 7,740 8,990 9,290 DM LS

A, B C, E, G 540/65 R28 8,540 8,990 9,290 9,790 10,090 10,390 DM LS

A, B C, E, G 540/65 R28 8,540 9,790 10,090 10,390 DM LS

A, B, C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

B, C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

B, K 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS

A, B, C 540/65 R28 10,390 10,690 DM LS

B, C 540/65 R28 10,390 10,690 DM LS

A Check tractor spools - Case or Bosch E Check if tractor is Tier 3B Tractor must be equipped with power beyond plate G Subframe will fit with front axle suspension (Tier 3 models).,C Will not fit tractors with wide weight carrier H Counter weight must be used with Q56D DMX subframe priced as DM K If equipped with front linkage some rework may be required.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Sub

fram

e

Prices - £ SterlingNON-PARALLEL PARALLEL

Hyd

raul

ic

Opt

ion


DM DM

CX90, CX 100, CX110 T3

MC115 and MC130 Tier 3

F 90, F 100, F 95, F105 - F/GE/XL

MC80, MC90, MC95, MC100, MC105

McCormick

F 80, F 75, F85 - F/GE/XL

C-Max 75, 80, 85, 90, 95, 100, 105, 110

CX70, CX75, CX80, CX85

CX90, CX95, CX100, CX105



MTX 165, MTX 185 Tier 2

MTX 155, MTX 175, MTX 200

MC 120 Power 6

MTX 120, MTX 135, MTX 145, MTX 150 Tier 3

MTX 120, MTX 135, MTX 150 Tier 2

MTX 110, MTX 125, MTX 140

MC 135 Power 6

MC105, MC110 Tier 3


29

Type

Width



380/70 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

K 10,390 10,690 DM LS

405/70 R20 6,540 7,790 DM OC

L 340/85 R24 6,540 7,790 8,190 DM OC

480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC LS

480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS

480/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS

540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS

540/65 R28 10,890 11,190 DM EY

D 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC

D 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC

J 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC

K 540/65 R30 8,540 9,790 10,090 10,390 DM LS

K 540/65 R30 10,390 10,690 DM LS

B, C, K 8,540 9,790 10,090 10,390 10,690 DM LS

B, C, F 10,390 10,690 DM LS

B Tractor must be equipped with power beyond plate J Q31, Q33, Q36, Q38 max wheel size 440/65 R24 ONLYC Will not fit tractors with wide weight carrier K If equipped with front linkage some rework may be required.D DMX subframe priced as DM L Q36/Q38 requires extended bearing boxesF Check S/No of XTX 215* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Hyd

raul

ic

Opt

ion


McCormickNON-PARALLEL PARALLEL Prices - £ Sterling

Sub

fram

e

DM DM

T-Max 80, 90, 100,110, 115

TTX 190, TTX 210, TTX 230

X4.50, X4.60, X4.70

X6.420, X6.430

X6.460, X6.470, X6.480 (X6L)

X4-20, X4-30, X4-35, X4-40

X5.20, X5.30, X5.40, X5.50

XTX 185, XTX 200, XTX 215

X7,440, X7.450, X7.460

X7.650, X7.660. X7.670, X7.680

X50.20, X50.30, X50.40. X50.50

X50.20M, X50.30M, X50.40M

X60.20, X60.30, X60.40, X60.50

X70.40, X70.50, X70.60




X70.70, X70.80

XTX 145, XTX 165,

30

Type

Width



A, G 11.2 x 24 6,540 7,790 8,190 DM OC

280/70 R16 DM OC

A 540/65 x R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 540/65 x R24 6,540 7,790 8,190 DM OC

A 540/65 x R24 6,840 7,040 7,740 8,290 8,590 8,790 DM OC

C 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

E, F 480/65 R28 8,990 DM LS

C 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC

B, E 480/65R28 9,790 DM LS

L 540/65 R28 9,040 10,290 10,590 10,890 DM EY HK

B, L 540/65 R28 10,890 DM EY HK

L 600/65 R28 9,040 10,290 10,590 10,890 DM EY HK

L 600/65 R28 10,890 11,190 DM EY HK

N, S 280/85 R24 6,540 7,790 8,190 DM OC

N, P, R, S 14,9 x 24 6,540 6,840 7,790 8,190 DM OC

A 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 11.2 R24 6,540 7,790 DM OC

A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

14,9 x 28 7,740 8,540 8,990 9,290 9,790 DM LS OC

540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC

T 540/65 R28 10,290 10,590 10,890 DM EY HK

T, U 600/65 R28 9,040 10,290 10,590 10,890 DM EY HK

B, T 600/65 R28 10,290 10,590 10,890 DM EY HK

T, U 600/65 R28 10,890 11,190 DM EY E

T 600/65 R28 10,890 11,190 DM EY HK

A DMX subframe priced as DM L Tractor must be ordered with factory fitted mid-mount valve for hose kit. S Serial Number of tractor requiredB Q66, Q68 must have extended bearing boxes. M HK requires loader interface prep CNH 8110-330489 or special HK with front hitch T Order loader ready harness from CNH harness #84167030 and 2 relays #82017871.C Additional kit 10377122 req'd for axle suspension N Subframe will fit with Folger front linkage U Hydraulic sets do not fit tractors with mid-mount valve. Use standard hose setF Q56, Q58 must have extended bearing boxes. P State if front axle support is cast or welded.G Q36 must have extended bearing boxes for Super steer. R Subframe designed for tier 3 tractors For Euro-C For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

New Holland

T6030, T6050 Plus/Delta, T6070 Plus

T4.75, T4.85, T4.95, T4.105, T4.115

T6030, T6050 Plus/Delta, T6070 Plus, Super Steer

T4020, T4030, T4040, T4050 Super steer

T5030, T5040, T5050, T5060, T5070

T6010, T6020 Plus/Delta, T6040 Elite

TD5040, TD5050

T6010, T6020 Plus/Delta, T6040 Elite, Super Steer

TD5010, TD5020, TD5030

TD4020F, TD4030F, TD4040F

T6050, T6070, T6080, T6090 RC & PC

T6050, T6070, T6080 T6090 S/Str RC & PC

T7030 + Super Steer

Prices - £ SterlingPARALLEL


NON-PARALLEL

Sub

fram

e

Hyd

raul

ic

Opt

ion


DM DM

T7.170, T7.185, T7.200, T7.210

T7.220 + Super Steer

T7.235, T7.250, T7.260, T7.270 + Super Steer

T4.55, T4.65, T4.75

T7040, T7050, T7060, T7070 + Super Steer

T6.120, T6.140, T6.150, T6.160 + Auto Command

T6.155, T6.165, T6.175

T5.95, T5.105, T5.115 & Electro Command

TD5.65, TD5.75

TD5.75, TD5.90 TD5.100, TD5.110 Tier 3

T7.175, T7.190, T7.210, T7.225 Tier 4B

TD5.85, TD5.95, TD5.105, TD5.115 Tier 4A

T7.230, T7.245, T7.260 and T7.270 Tier4B

T6.145, T6.155, T6.165, T6.175 Tier 4B








31

Type

Width



A 11,2 x 24 6,540 7,790 8,190 DM OC

A 13,6 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC

A 14,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

600/70 R30 DL LS

A 540/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

D 540/65 R28 8,740 9,990 10,290 10,590 DMX LS OC

B 540/65 R28 9,990 10,290 10,590 DMX LS

B 540/65 R28 9,990 10,290 10,590 10,890 DMX LS

540/65 R28 10,590 10,890 DMX LS

600/65 R30 10,590 10,890 DMX LS

A 320/70 R24 DM OC

A, J 320/70 R24 6,540 7,790 8,190 DM OC

380/70R20 6,540 7,790 DS OC

A, G, K 320/70 R24 7,040 7,790 8,090 8,190 DM OC

420/70 R24 7,240 7,940 8,490 8,990 9,190 DMX LS

13,6 x 28 7,940 8,740 9,190 9,490 9,990 DMX LS

C 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

E, F 480/65 R28 8,990 DM LS

C 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC

E 480/65R28 9,790 DM LS

B 480/70 R30 9,990 10,290 10,590 10,890 DMX LS

480/70 R30 10,590 10,890 DMX LS

7,240 7,940 8,490 8,990 9,190 DMX LS OC

7,940 8,740 9,190 9,490 9,990 DMX LS OC

D, H 420/70R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC

D 420/70R28 10,590 10,890 DMX LS OC

A DMX subframe priced as DM E To clean air filter, remove loader K 1000kg counterweight required on Q46, Q48, Q49B Q66, Q68 must have extended bearing boxes. F Q56, Q58 must have extended bearing boxes.C Additional kit 10377122 req'd for axle suspension H Check serial No when ordering subframe.D Check tractor hydraulic system - LS or OC J Will fit with Zuidberg front hitch on 85DA and 95DA* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

5640, 6640, 6840, 7740

7840, 8240, 8340

8160, 8260, 8360, M 100, M115, M 135

8560, M 160

TD 55D, TD60D, TD65D, TD70D

TS 90, TS 100, TS 110

TM115, 120, 125, 130, 135, 140, 150, 155

TM135, 140, 150, 155, 165 Super Steer

TM115, 120, 125, 130 Super Steer

TD 75D, TD 80D, TD 85D, TD 90D

TN 55A, TN 65A, TN 75A (and TN models)

TL 70, TL 80, TL 90, TL 100 and TLA

TG 210 ,TG 230, TG 255, TG 285 Super Steer

TM 165, TM 175

TD 95D

TVT 170, TVT 190, TVT 195 T3

New HollandEuro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)

TN 55, 60, 65, 70, 75, 85SA (& TNS models)

TM 175, TM 190 Super Steer

TVT 135, TVT 155, TVT 145 T3

TS 100A, TS 110A

TN 65F, 75F, 90F, TN 75FA, 85FA, 95FA

TN 55, 65, 75D & TN 60, 70, 75A, 85, 95DA

TS 100A TS 110A Super Steer

TS 115

TS 115A, TS 125A, TS 135A

TS 115A, TS 125A, TS 135A Super Steer

NON-PARALLEL







Sub

fram

e

Hyd

raul

ic

Opt

ion

PARALLELDM DM

32

Type

Width



G 360/70 R20 6,540 7,790 DSX OC

G 320/70 R24 6,540 7,790 DSX OC

6,540 7,790 8,190 DM OC

P, U 360/70 R20 6,540 7,790 DM LS EY

P, U 360/70 R20 6,540 7,790 DM LS EY

D 420/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

D 380/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

D, J 380/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

D 420/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

H 560/85 R28 7,040 7,790 8,090 8,290 8,790 DM LS EY

P, R, ST 540/65 R24 7,040 7,740 8,290 ` 8,790 8,990 9,290 DM LS

E, P, T 540/65 R24 7,540 8,240 8,790 9,090 9,290 9,490 9,790 DM EY HK

J 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS EY

E 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY E

P 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY

E 540/65 R28 9,040 10,290 10,590 10,890 DM EY E

H 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC

F,H, M 540/65 R34 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY OC

D Q36, Q38 must be equippied with extended bearing boxes P Order accumulator kit 5034083 with EasyElectroDrive (extra cost)E ErgoDrive not available R Tractors w/o power beyond, order shuttle valve for LS signal. Order from SDF. Ref no: 2.3729.686.0H ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verion S State pump flow rateJ DMX subframe priced as DM T If Sauter front hitch fitted, order kit 10418625 at £150M If Sauter front hitch fitted, order kit 10418133 at £150 U Subframe not adapted for under slung (horizontal) exhaust pipe.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Iron 100, 110, 120, 125 (4 cyl)

Iron 115, 125, 135, 155

Dorado 76, 85, 86

Fortis 120.4, 130.4, 140.4, 150.4, 160.4 Infinity and Continuo

Fortis 120.4, 130.4, 140.4, 150.4, 160.4

Fortis 180, 190 Hi-Line, 180, 190 Continuo

Explorer 85, 95

Explorer 3 85, 100, 110

Fortis 150, 160, L 150 and L 160

Fortis 150, 160 Hi-Line, L 160 Continuo

Fortis 180, 190

Explorer 3 90, 105

Explorer 90.4, 105.4, 115.4 Tier 4

Dorrado 80, 90 Classic T4i

Hyd

raul

ic

Opt

ion

Explorer 70 II, 75, 80 II, 90 II, 95 and Classic

SamePARALLELNON-PARALLEL Prices - £ Sterling


Dorado 56, 66

Dorado 3 60, 80, 90, 100

Sub

fram

e

Dorado 90.4, 90.4 Classic and 100.4 T4i

DM DM


Also check out the Versa-X rangeAlso check out the Versa-X range



Also check out the Versa-X rangeAlso check out the Versa-X range



33

Type

Width



A, M 9,790 10,090 10,390 10,690 DM LS

C, M 7,740 8,540 8,990 9,290 9,790 10,090 DM LS

M 9,790 10,090 10,390 10,690 DM LS

E, M 540/65 R34 10,890 11,190 DM EY

H 7,740 8,540 8,990 9,290 9,790 DM OC EY

H 8,540 8,990 9,290 9,790 10,090 DM LS EY

H 8,540 9,790 10,090 10,390 10,690 DM LS EY

E, H 10,890 11,190 DM EY

8,540 9,790 10,090 10,390 DM LS

N 480/70 R28 7,740 8,540 8,990 9,290 9,790 DM OC

420/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

F 480/70 R28 7,740 8,290 8,590 8,790 8,990 DM OC

420/85 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

P, D 420/85 R24 7,240 7,940 7,990 8,290 8,390 8,490 8,990 DMX OC

F 420/85 R24 7,940 8,490 8,790 8,990 9,190 DMX OC

B 480/70 R28 8,740 9,990 10,290 10,590 DMX OC

B 540/65 R30 8,740 9,990 10,290 10,590 DMX OC

P, Q 560/85 R28 7,040 7,740 8,290 8,590 8,990 DM OC

P, Q 560/85 R28 7,040 7,740 8,290 8,590 8,990 DM LS OC

A Adapted for engine type BF6M1013EC F Q46/Q48 must be equippied with extended b/boxes Q Order kit 5034301 for tractors with original front hitch.B Subframe will fill fit with or w/o original front hitch H ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verionC Adapted for engine type BF6M2012C M If Sauter front hitch fitted, order kit 10418133 at £150D Q36, Q38 must be equippied with extended bearing boxes N Dynamic mudguards onlyE ErgoDrive not available P Order accumulator kit 5034083 with EasyElectroDrive (extra cost)* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Hyd

raul

ic

Opt

ion


SameNON-PARALLEL PARALLEL Prices - £ Sterling

Sub

fram

e

DM DM

Iron 130S, 150S,

Iron 130S, 150S

Iron 130S, 140S, 150S, 150.7, 165S, 165.7

Iron 180.7

Iron 110, 115 (6 cyl)

Iron 130, 140, 160

Virtus 100, 110, 120, 130 Basic, Infinity

Iron 150, 170, 175 and Continuo

Iron 185

Iron 130S, 140S, 150S CVT

Laser 140, 160

Silver 100.4

Silver 100 6

Silver 80, 85, 95, 110-4 cyl

Silver 105 6 cyl

Silver 110 6, 115

Silver 130

Virtus J 90, 100, 110, 120

Silver3 100, 110 and Continuo

34

Type

Width



480/65 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A, E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

A, C, D 480/65 R28 7,940 9,190 DMX OC

A, E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC

A, C, D 480/65 R28 7,940 9,190 DMX OC

M, E 540/65 R28 8,740 9,990 10,290 10,590 10,890 DMX OC

M, C 540/65 R28 10,590 10,890 DMX OC

G, H 480/65 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

C, G, H 480/65 R24 7,040 7,790 8,090 8,190 DM OC

G, H 480/65 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

C, G, H 480/65 R24 7,040 7,790 8,090 8,190 DM OC

C, G, H 480/65 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

B 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM OC

C 540/65 R28 8,740 9,990 DMX LS

E 540/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS

A Kit 10347271 required for old type axle before S/N K36108 - Additional cost. E Subframe will fit all options except Zuidberg front hitchB Subframe will fit with or w/o original front hitch G Q36, Q38 Loader must be ordered with long b/boxesC Subframe will fit with original Zuidberg front hitch H DMX subframe priced as DMD Q56, Q58 Loader must be ordered with long bearing boxes M Kit 14321621 required for old type axle before S/N K36108 - Additional cost.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

A 83, A 93

A 65 - A95

A 65 - A95


Sub

fram

e


Hyd

raul

ic

Opt

ionValtra DM DM



C 90 - C150

M 120, M130, M150

M 120, M130, M150

A 72 - A 92

A 72 - A 92

6200, 6300, 6400

6200, 6300, 6400

600 - 900

6250, 6350, 6550, 6650, 6750, 6850

8050, 8350, 8450, 8550, 8750, 8950

8050, 8350, 8450, 8550, 8750, 8950

6250, 6350, 6550, 6650, 6750, 6850

35

Type

Width



J, L 16.9 x 28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM OC HK

L 16.9 x 28 8,990 9,290 9,790 DM LS OC

E 14.9 x 24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

B, J 16.9 x 28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS

B 16.9 x 28 7,740 8,540 8,990 9,290 9,790 DM LS

B, G 540/65 R28 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

B 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM OC

B 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS HK

B, J, N 540/65 R28 7,740 8,290 8,590 8,790 8,990 DM LS

B, J, N 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM OC HK

B, N 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY HK

16.9 x R34 Turn to Q88/Q98 page

C 540/65 R30 10,590 10,890 DMX LS

E 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX LS

E 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX OC

C 540/65 R30 10,590 10,890 DMX OC

8,740 9,990 10,290 10,590 10,890 DMX OC HK

L 460/85 R30 8,740 9,990 10,290 10,590 10,890 DMX LS HK

K 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX LS

K 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX LS

540/65 R30 10,590 10,890 DMX LS

B, K, M, N 540/65 R30 10,290 10,590 10,890 DM EY

B Subframe will fit with or w/o original front hitch J Q46, Q48 Loader must be ordered with long bearing boxes N Hydraulic sets do NOT fit tractors with mid mounted tractor valve.C Subframe will fit with original Zuidberg front hitch K Q66, Q68 Loader must be ordered with long bearing boxes c/w original front hitchE Subframe will fit all options except Zuidberg front hitch L Hose kits available for Advance models P Order check valve 36722200 from Agco in combination with hydraulic sets.G Q31, Q33, Q36, Q38 Loader must be ordered with long bearing boxes M Q66 is not recommended for T214 and T234.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

DM DM

N 91, N101, N111, N121 e and Advance

S 232, S 262, S 292, S 322, S 352

T 120 - T 190

N 82, N 92

N 122 Direct/Versu

N 142 Direct/Versu

N103.4, N113, N123, N143 HiTech (H3 & H5)

N104, N114e, N124 HiTech

N134, N154e, N174 Active, Direct, Versu

N134, N154e, N174 HiTech

T144, T154, T174e, T194, T214, T234

Hyd

raul

ic

Opt

ion


ValtraNON-PARALLEL PARALLEL Prices - £ Sterling

Sub

fram

e

T 121 - T 171 Classic, T 121 - T 191 HiTech

N 141 and Advance

N143, N163 Direct/Versu

N 93 (H3), N103 HiTech (H3 & H5)

T 151e - T 191 Advance

T 132 T 152 T 153 T 162 T 163 Direct/Versu

T 133 T 153 T 173 T 193 HiTechT153, T163, T172, T182, T183, T202, T203, T213 Direct/Versu

T 120 - T 190

T 120c - T 190c

T 120c - T 190c

Selecto Fix Upper £60

Sele

cto

Fix

Low

er£2

50

LoaderLights£295

Multicoupler MC4 £295

Hydraulic Locking £450

Make life easier;add these options to your loader

36

Type

Width



X 6,540 7,040 7,790 8,290 SX OC

X 6,540 7,040 7,740 7,790 8,290 8,990 SX OC

X 6,540 7,790 8,290 SX OC

X 6,540 7,790 8,290 SX OC

X 6,540 7,790 SX OC

X 6,540 7,040 8,290 8,990 SX OC

Z 9,990 MX OC

J 540/70R24 8,540 9,790 DM OC

A, E 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC

A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC

6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC

A, E 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

G, H 340/85 R24 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC

A, B, D 380/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC

A, B, D 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

A, BD, F 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

A, D 380/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC

A, D 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

A, D 380/85 R24 6,540 6,840 7,040 8,290 8,590 8,790 DM OC

A, D 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

J, K 540/70R24 7,740 8,990 DM OC

J 420/70R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC

A DMX subframe priced as DM F 4 Cylinder only K Subframe will fit with and without front axle suspensionB Check if tractor has metal or plastic bonnet G Adapted for tractors with 175L or 190L fuel tank X US subframe - NOT DM Lock & GoD Subframe will not fit with front linkage H Order Q36, Q38 with long bearing boxes in combination with f Z UM subframe - NOT DM Lock & GoE Check date tractor was manufactured J Subframe will fit with and without front hitch* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200

Proxima 6441, 7441, 8441, 9441

Proxima 65, 75, 85, 95

Proxima Plus 85, 95, 105

Proxima Power 85, 90, 95, 100, 105, 110, 115, 120

4320, 4340, 5320, 5340, 6340, 7340

8621, 9621

Crystal 150, 160

9145, 9245, 9540

7540, 8540, 9540

4341, 5341, 6341, 7341

6045, 6245, 7045, 7245, 7745

6011, 6211, 7011, 7211, 7711

NON-PARALLEL


Zetor DM DMPrices - £ Sterling

Sub

fram

e

Hyd

raul

ic

Opt

ion


PARALLEL

Forterra HD 130, 140, 150

Proxima 70, 80, 90, 100

Proxima Plus 90, 100, 110

Forterra HSX 100, HSX 110, HSX 120, HSX 130 and HSX 140

Forterra 8641, 9641

Forterra 10441, 11441

Forterra 12441

Forterra 100, 110

Forterra 120, 130, 140

Proxima Plus 8541, 9541, 10541

Forterra 115, 125

Forterra 95, 105

37

Type

Width DL DXLModel Q88 Q98

Std Equip' →

Tractor model NBMax front wheel ↓ 9,920 10,920 Std Opt

16.9 x 30 13,290 DL LS

B 600/65 R30 13,290 DL LS

B 600/65 R30 14,990 DXL EY

A 600/65 R28 13,490 DL HK

A 600/65 R28 13,490 DL HK

U

U 600/70 R28 17,495 SP2 EY

C 600/7 R30 13,790 DL EY

D, E, U 540/65 R34 15,990 SP1 HK E

F, G, H 600/65 R34 13,290 DL LS

G, T 540/65 R30600/70 R28 13,290 DL LS

D 600/70 R30 13,290 DL LS

600/65 R28 13,290 DL LS

N 600/70 R30 13,790 DL EY

G 14,990 DXL EY

13,790 DL EY

K L M N P Q R S T

J, K 600/65 R65 13,290 DL LS HK

J 600/65 R65 13,290 DL LS HK

J 16.9 x 30 13,490 DL HK LS

L 16.9 x 34 13,790 DL EY

16.9 x 30 13,290 DL LS

M 600/65 R28 13,790 DL EY

600/65 R28 13,490 DL HK E

14,490 DXL LS E

B 600/70 R30 13,790 DL EY

B, N 600/70 R30 13,790 DL EY

16.9 x 34 13,790 DL EY

A, P, Q 540/65 R30 13,790 DL EY HK

P, Q 540/65 R30 13,290 DL LS

P, Q 540/65 R30 13,290 DL LS HK

P, Q 540/65 R30 13,290 DL LS HK

P, Q, R 540/65 R30 13,490 DL HK LS A B C D E F G H J

7730, 7830, 7930

Ergo

Driv

e w

ill no

t fit

if tra

ctor

has

a C

omm

and

Arm

rest

. Use

Ele

ctro

Driv

e

ClaasAxion 810, 830, 840, 850 C-Matic and Hexashift Tier 4

7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R

Use

120

0kg

coun

terw

eigh

t

Hos

e se

t mou

nts

to tr

acto

r mid

-mou

nt v

alve

and

fron

t hitc

h

Del

uxe

hose

set

will

not f

it to

trac

tors

with

air

brak

es

Subf

ram

e w

ill fit

all

optio

ns e

xcep

t Zui

dber

g fro

nt h

itch

Rem

ove

front

wei

ght c

arrie

r

Prov

ide

S/N

o fo

r T70

50 a

nd T

7060

sta

ndar

d tra

ctor

s

No

grille

gua

rds

in s

ubfra

me

set

Subf

ram

e w

ill on

ly fi

t to

6499

from

S/N

o T1

9803

4 U

niqu

e su

bfra

me

conf

igur

atio

n

Sub

fram

e

T7.235, T7.250, T7.260, T7.270 + Super Steer

LandiniPowermaster 180, 200, 220

8650, 8660, 8670, 8680, 8690

Massey Ferguson

7497, 7499 Dyna VT8450, 8460, 8470, 8480

6497, 6499 Tier 3, Dyna 6

PUMA 195, 210, 215, 225, 230PUMA 180, 195, 210, 215, 225, 230 + CVX + Multicontroller

Deutz, Same

No subframes available for new 900 SCR series.

T7050, T7060 T7070 and Autocommand8670, 8770, 8870, G170, G190, G210, G240

T132, T152, T153, T162, T164, T183, T172, T182, T192, T202, T203, T213 Direct/VersuT151, T161, T171, T191 Advance

T8.275, T8 300, T8 330, T8 360, T8 390 T4

ValtraT8020, T8030, T8040, T8050 Super Steer and TG Super Steer.T8020, T8030, T8040, T8050, and TG210, TG230, TG255, TG285, TG305

S232, S262, S292, S322, S352T120, T130, T140, T160, T170, T180, T190T120c, T130c, T140c, T160c, T170cT121, T131, T151, T161, T171, T191

Hyd

raul

ic

Opt

ion

Euro t/c c/w clic on, 3rd service, Electric Softdrive and Lock & Go

MAGNUM 235, 260, 290, 315, 340 Tier 4

Case IHMAGNUM 7100, 7200 series

PARALLEL

MAGNUM MX 210 - 335, MAGNUM 180, 190, 210 and 225 Tier 4


Che

ck s

eria

l no.

Fendt819 Vario, 822 Vario, 824 Vario, 826 Vario and 828 Vario916 Vario, 920 Vario, 924 Vario, 926 Vario and 930 Vario

John Deere6170R, 6190R, 6210R Tier 3. 6175R, 6195R, 6215R Tier 4

8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410

Deutz Agtrotron TTV 630, TTV7000, Same Iron 190. Same X210, X230, X250 Continuo

New Holland

8260R, 8285R, 8310R, 8335R, 8360R

Del

uxe

hose

set

will

only

fit t

ract

ors

with

joys

tick

in a

rmre

st.

With

sta

ndar

d ho

se s

et, t

ract

or m

ust b

e eq

uipp

ed w

ith 2

x a

ux v

alve

s.

Elec

trDriv

e LC

S av

aila

ble

only

Trac

tor m

ust b

e eq

uipp

ed w

ith p

ower

bey

ond

plat

e

Subf

ram

e w

ill no

t mou

nt w

ith B

enne

tt En

g or

Dro

mon

e PU

H

Stat

e if

tract

or is

egu

ippe

d w

ith fr

ont h

itch

Adap

ted

for S

/Nos

9xx

236

001,

9xx

246

001,

930

231

001,

930

241

001

Ord

er 0

079.

089.

000

kit f

rom

Fen

dt, i

f 3rd

and

4th

ser

vice

is re

quire

d w

ith

C 1

Model Lift Capacity 3000 4000 4500 5000 5200 6000 7000 8000 9000 Areas of application H HT HD HV HDV Hy-Tip Grading Snow

Clearing

Q21 1190 1000 800 Light excavation and loading work ▲ ▲

Q31 1220 1000 1000 800 Loading of grain, wood chips and snow ▲ ▲ ▲ ▲

Q33 1450 1200 1000 1000 Loading of lighter materials at high level • • ▲

Q41 1500 1200 1000 1000 Heavy excavation and loading work • ▲ • •

Q51 1640 1200 1200 1000 Work in gravel/sand, earth and stone ▲ • •

Q61 1970 1400 1400 1200 1000 Contract work in gravel/sand, earth and stone ▲ ▲ •

Q26 1280 1000 1000 Grading work ▲ • •Q36 1310 1200 1000 1000 Professional snow

clearance ▲ ▲ • • •Q38 1590 1200 1100 ▲ • Best Choice

Q46 1630 1300 1200 1100

Q48 1620 1200 1200 1100 1100

Q49 1600 1200 1200 1100 1100

Q56 1720 1300 1200 1200 1000

Q58 2010 1400 1400 1200

Q66 2120 1500 1500 1500

Q68 2450 1500 1500 1500

Q76 2120 1500 1200

Q78 2430 1500 1500 1300

Q88 2770 1500 1500

Q98 2600 1500 1300

A counterweight increases tractor stability, traction and tractor braking force.

COUNTERWEIGHT AND BUCKET RECOMMENDATION MATRIX

BUCKET MODEL

A Good Choice

Counterweight recommendation.Tractor weight to loader model.

TRACTOR WEIGHT (kg)

This

info

rmat

ion

is a

gui

de o

nly.

Counterwieght Reguations

Which bucket should I choose?

Regulation - EN 12525: No less than 20% of the gross tractor/loader weight must apply to the

rear axle, including the counterweight.

12

C 2

Gra

ding

MODEL 135

160

185

210

240

135

160

185

210

185

210

240

260

200

220

240

260

210

240

260

160

185

210

220

200P

C

200P

S

200

220

240

260

130

150

170

190

230

1000

1600

2500

150

200

Q21/26 • • • • • • • • •Q31/33/36 • • • • • • • • • ▪ • • • • • •Q38/Q39 • • • • • • • • • • • • ▪ ▪ • • • • • •

Q41/46/49 • • • • • • • • • • • • • • • ▪ ▪ • • • • • •Q48 • • • • • • • • • • • • • • • • • ▪ • • • • • • •

Q51/56/58 • • • • • • • • • • • • • • • • • • • • • ▪ • • • • • •Q61/66/68 • • • • • • • • • • • • • • • • • • • • • • • • • •

Q76/78 • • • • • • • • • • • • • • • • • • • • •Q88/98 • • • • • • • • • • • • • • • • • • • • •• Recommendation ▪ Low Density Material/Possible Recommendation

Flex

ibal

TopG

rip

Bale

Spi

ke

Silo

split

Qua

drog

rip

Twin

For

k

Lifti

ng A

rm

MODEL 160

200

130

160

HD

200

140

140

190

130

150

170

190

210

230

130

150

170

190

210

230

185

210

240

260

125

150

175

200

225

210

240

260

800

800

1000

Q21/26 • • • • • • • • • • • •Q31/33/36 • • • • • • • • • • • • • • • • • • • • • • • •Q38/Q39 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Q41/46/49 • • • • • • • • • • • • • • • • • • • • • • • • • • • ▪ • • • •Q48 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ▪ • • • • •

Q51/56/58 • • • • • • • • • • • • • • • • • • • • • • • • • • ▪ • • • • • • • • •Q61/66/68 • • • • • • • • • • • • • • • • • • • ▪ • • • • • • • •

Q76/78 • • • • • • • • • • • • • • • • • • • • • • • • • • •Q88/98 • • • • • • • • • • • • • • • • • • • • • • • • •

BUCKETS

ROUND BALE

Uni

grip

SERIES XH

High Tipping

SERIES HD

SERIES HV

SERIES HDV

SERIES MP/MPT

4 in 1

SILOCUT SG

GRABS

Prec

isio

n

IMPLEMENT - LOADER RECOMMENDATIONS

MANUREFORKS

PALLET FORKS

STO

NE

FOR

K

SILOGRAB MULTIBENNE POWERGRAB SE

MAXI-GRAPPLEWith & W/O

teeth Cou

nter

Wei

ght

SQUARE

Flex

igrip

Hin

ged

Fork

FORKS

OTHER

SERIES H

SERIES HT

Contact Alo UK for implement recommendation for loader C 3

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price1.35m 0.54 m³ Euro 11251018Q 1.35m 0.54 m³ Euro 11251108Q 1.85m 0.72 m³ Euro 11251068Q

53" 18 cu.ft SMS 11251015Q 53" 18 cu.ft SMS 11251105Q 72" 25 cu.ft SMS 11251065Q

1.60m 0.65 m³ Euro 11251028Q 1.60m 0.65 m³ Euro 11251118Q 2.10m 0.82 m³ Euro 11251078Q

Type 3 11251023Q 63" 23 cu.ft SMS 11251115Q 83" 29 cu.ft SMS 11251075Q

SMS 11251025Q 1.85m 0.72 m³ Euro 11251128Q 2.40m 0.95 m³ Euro 11251088Q

1.85m 0.72 m³ Euro 11251038Q 72" 25 cu.ft SMS 11251125Q 94" 34 cu.ft SMS 11251085Q

Type 3 11251033Q 2.10m 0.82 m³ Euro 11251138Q 2.60m 1.03 m³ Euro 11251098Q

SMS 11251035Q 83" 29 cu.ft SMS 11251135Q 102" 37 cu.ft SMS 11251095Q

2.10m 0.82 m³ Euro 11251048Q

Type 3 11251043Q

SMS 11251045Q

2.40m 0.95 m³ Euro 11251058Q94" 33 cu.ft SMS 11251055Q

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price2.00m 1.16 m³ Euro 11251148Q 2.10m 1.50 m³ Euro 11251808Q

79" 41 cu.ft SMS 11251145Q 83" 43 cu.ft SMS 11251805Q

2.20m 1.28 m³ Euro 11251158Q 2.40m 1.70 m³ Euro 11251818Q87" 45 cu.ft SMS 11251155Q 94" 60 cu.ft SMS 11251815Q

2.40m 1.70 m³ Euro 11251168Q 2.60m 1.85 m³ Euro 11251828Q94" 60 cu.ft SMS 11251165Q 102" 65 cu.ft SMS 11251825Q

2.60m 1.85 m³ Euro 11251178Q102" 65 cu.ft SMS 11251175Q

240HDV 1,435

240HV 1,335 260HDV 1,735

240H 905 HIGH VOLUME

260HV 1,435

220HV 1,035

HIGH VOLUME HEAVY DUTYSe

ries

HV

Serie

s H

DV

200HV 835 210HDV 1,135

210H 80583" 29 cu.ft Remember to quote a Counter Weight

240HD 1,385

185H 70572" 25 cu.ft 210HT 985 260HD 1,585

160H 655 160HT 785 210HD 1,08563" 23 cu.ft

185HT 885

135H 605 135HT 725 185HD 985

BUCKETSGENERAL PURPOSE GENERAL PURPOSE WITH TEETH HEAVY DUTY

Serie

s H

Serie

s H

T

Serie

s H

D


Mouth Mouth

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price1.65m 1.65m Euro 11253138Q

65" 65" SMS 11253138Q

1.90m 1.90m Euro 11253148Q75" 75" SMS 11253145Q

2.15m 2.15m 85" 85"

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No PriceEuro 11252658Q 2,045

Without 11252650Q 1,945Euro 11252668Q 2,245 Part No Price

Without 11252660Q 2,145Euro 11252678Q 2,445 Model Width Capacity Hook Part No Price

Without 11252670Q 2,345Euro 11252688Q 2,645

Without 11252680Q 2,545

965

230 2.30m 91"

1.41 m³200XH 2.00m 79"

1.60 m³

60000540 1,500

Eur

o

11251528Q220 2.20m 87"

3754th service kitBucket mounted

60000485 100

Plastic Cutting Edge kit

Steel Bolt-On Cutting Edge kit

Description

FRONT TIPPING

XH S

erie

s Rubber dampeners used to reduce noise

during operation

Will require 3rd and 4th service fuctions.

price includes hoses

Hoses included with hydraulic implements are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost

240XH 2.40m 94"

2.00 m³

260XH 2.60m 102"

2.20 m³

Also available with Trima hooks at Euro prices.0.83 m³ 11251738Q 1,155

0.65 m³

240 2.40m 94"

Special bucket mounted 4th service valve to activate flap 60003452

220XH 2.20m 87"

1.80 m³

SPECIALIST BUCKET

SPECIAL CLEARING BUCKET

Gra

ding

2.00m 79"

0.93 m³ 615

200PC 0.78 m³ 785

The Precision Bucket is different from other buckets by being narrower in the front. The high volume of the bucket and long base give better loads when travelling between sites, reducing load trips. Material can also be placed with greater accuracy with increased visibility to the cutting edge.PS Maximise bucket filling.PC Where loose material is used.

Euro 11252848Q 3,400

3,420

3,120

210MPT 0.66 m³

185MP 0.56 m³ 3,020 185MPT 0.56 m³

SPECIAL BUCKETSMULTI PURPOSE MULTI PURPOSE WITH TEETH SPECIALIST BUCKET

4 in

1

4 in

1

967m

m

967m

m

Prec

isio

n

Conical (PC) Straight (PS)

200PS

Also available for skidsteer. See skidsteer implements page

Order Selecto Fix for simple hose connection

11252448QEuro

11252168QEuro

11252158QEuro

11252148QEuro

11252468QEuro

11252458QEuro


2,820160MP 0.48 m³ 2,720 160MPT 0.48 m³

210MP 0.66 m³ 3,320

Contact Alo UK for implement recommendation for loader. C 5

Mouth Mouth Mouth

Euro hooks welded

Model Width Capacity Tines Hook Part No Price Model Width Capacity Part No Price Model Width Capacity Tines Hook Part No Price1.85m 11254081Q 1.85m

72" 11254089Q 72"

2.10m 72" 11254091Q 2.10m83" 11254094Q 83"

2.40m 11254095Q 2.40m94" 83" 11254096Q 94"

2.60m 11254103Q 2.60m102" 11254104Q 102"

94" 11254105Q

11254120Q

Hook Part No Price 11254114Q102" 11254118Q

Mouth

Part No Price60002029 150

Part No Price

Model Width Capacity Tines Hook Part No Price1.30m 0.69 m³

51" 24 cu.ft

1.50m 0.79 m³59" 27 cu.ft

1.70m 0.90 m³67" 32 cu.ft

1.90m 1.01 m³Model Width Colour Part No Price 75" 35 cu.ft

185BOH 1.85m 11254153Q 175 2.10m 1.11 m³210BOH 2.10m 11254154Q 200 83" 39 cu.ft

240BOH 2.40m 11254155Q 225 2.30m 1.22 m³260BOH 2.60m 11254156Q 250 91" 43 cu.ft

BUCKET GRABSHEAVY DUTY BUCKET GRAB

Pow

ergr

abB

OH

1500

mm

Bolt

On

Hoo

kR

ail T

ype

CNH LM

Bobcat FDI

Claas Scorpion

JCB Qfit

Manitou MTL

Merlo ZM2

Matbro (Pin and Cone)

Volvo

Hauer

SkidSteer

Schäffer

SMS

Hook Type

Powergrab BOH c/w hooks

1500

mm

Price includes loader fittings and hoses

185BOH

275

260BOH 1.40 m³ 9 3,400

MULTIPURPOSE GRAB

Mul

tiben

ne

1248

mm

185 SE* 1.01 m³ 6

Eur

o

11250728Q 2,700

* Powergrab 185SE up to Q56 loader only

KramerWeidemann

11254111Q

11254112Q 225

11254123Q

Side plate extension set Multipurpose grab

11260872 150price includes hoses

Weidemann

HEAVY DUTY BUCKET GRAB

Pow

ergr

ab SE

Price includes loader fittings and hoses

210BOH 1.15 m³ 7

240BOH 1.30 m³ 8

210 SE 1.15 m³ 7 11250738Q 2,90011254100Q

11254080Q

Hook

HEAVY DUTY BUCKET GRAB

Pow

ergr

abB

OH

1.01 m³

Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost

Hook Types for Powergrab BOH (only)

260 SE 1.40 m³ 9 11250758Q 3,400

240 SE 1.30 m³ 8 11250748Q 3,250

11254110Q

11254102QRai

l Typ

eW

ithou

t hoo

ks2,700

2,900

3,250

1.01 m³ 6Kramer

Weidemann

KramerWeidemann

10 11250848Q 2,075

210 11 11250858Q 2,275

8 11250828Q 1,675

170 9 11250838Q 1,875

7

1500

mm

Kramer

12 11250868Q 2,475

Eur

o

11250818Q 1,475

150

N.B. For high flow/pressure Telehandler, We recommend a pressure relief valve.

Type

BOLT ON CUTTING EDGE option

The NEW Powergrab BOH Adapted to mount to material handlers to suit Bolt On Hooks (BOH). Prepared for a Bolt on Cutting Edge (BCE).Pressure relief valve may be required.

3 section cutting edgeY

ello

w

Och

ra

3,650

3,500

3,150

2,950

1.40 m³

1.30 m³

1.15 m³

190

11254099Q 195

11254113Q 250

11254147Q 295

11254366Q 305

230

11254367Q 290

130

250

11254125Q 290

Pressure Relief Valve for PG BOH

11254368Q 255

11254124Q 250

11254122Q 275

Pow

ergr

abB

OH

Euro

Euro

Euro

Euro

2.10m

2.60m

2.40m

1.85m

260BOH

240BOH

210BOH

185BOH


Mouth Mouth

Model Width Hook Part No Price Model Width Capacity Tines Hook Part No Price Model Width Capacity Tines Hook Part No PriceEuro 11251838Q Euro 11250888Q Euro 11254226Q 2,595

Type 3 11251833Q Type 3 11250883Q SMS 11254226Q 2,59551" SMS 11251835Q 51" SMS 11250885Q w/o 11254227Q 2,495

Euro 11251848Q Euro 11250898Q Euro 11254229Q 2,995Type 3 11251843Q Type 3 11250893Q SMS 11254230Q 2,996

59" SMS 11251845Q 59" SMS 11250895Q w/o 11254228Q 2,8951.70m Euro 11251858Q 1.70m Euro 11250908Q Euro 11254232Q 3,395

67" SMS 11251855Q 67" SMS 11250905Q SMS 11254233Q 3,3961.90m Euro 11251868Q 1.90m Euro 11250918Q w/o 11254231Q 3,295

75" SMS 11251865Q 75" SMS 11250915Q 2.00m2.30m Euro 11251878Q 2.10m 78"

91" SMS 11251875Q 83" 2.25m2.30m 88"

91"

2.50m98" Part No Price

60002029 150

Model Width Tines Length Hook Part No Price

1.10 m³1.75m68"175 SG

770m

m

3,600

260 2.60m

102"

5 grab27cm

11250535 3,700

240T 5 grab8 lower

11250538 3,900

ROUND BALE - BRASH

Without teeth With teethc/w Hoses. Order with FOC protective backscreen.

210 2.10m

83"

4 grab24cm

Eur

o

11250533 3,200

210T 4 grab6 lower

11250536 3,400

240 2.40m

94"

4 grab24cm

11250534 3,400

240T 4 grab7 lower

11250537


1.25 m³ 16

225 SG 1.40 m³

200 SG 3,99511254234Qw/o

Max

i G

rapp

leFORKS AND GRABS

2nd year warranty does not include any wearing parts.2,575

SHEAR GRAB

11 11250928Q 2,375230 12 tines 1,035

Eur

o

250 1.33 m³

210

Remember to quote a Counter Weight

230 1.22 m³ 12 11250938Q

13 11250948Q 2,775

Max hyd pressure2 cylinders - 210 bar3 cylinders - 250 bar

18

Silocut SGII

Order pressure reduction valve if pressure exceeds above

NEW Silocut SGIIWelded sleeves for the tinesConus 3 outer tinesDacromet® corrosion protection on Bolt-on knifesNew 80mm x 80mm Backframe hook interface to accept various bolt-on hook40mm cylinder pins Improved greasing points for the main pivot pinsMore efficient cutting with the side tines closer to the side knifeStong corner braces to protect knives.

Pressure Relief ValveN.B. For high flow/pressure Telehandler, We recommend a pressure relief valve.

9 tines 805 170 0.90 m³ 9 1,975

190 10 tines 905 190 1.01 m³ 10 2,175

MANURE FORK SILAGE GRAB

150 1.50m8 tines 725 150 1.50m

0.69 m³ 7 1,575

0.79 m³

1.11 m³

170

8 1,775

Man

ure

Fork

s

Silo

grab

1172

mm

130 1.30m7 tines 655 130 1.30m

price includes hoses

Tines

Silo

cut S

GII

11254237Q 4,395

Euro version includes hoses (also available with Trima hooks)

100.80 m³125 SG

120.95 m³150 SG 1.50m59"

1.25m47"

14


Roller

89mm

129mmTines Roller Bale Size Price Model Price Model Hook Price

2

Fixing PriceClamp 150

Part No Price

Tines Hook Price Model Hook Price Model Pricewithout 335

5, MX


200 60 - 200cm max

11250390without hooks and hoses 1,980

Euro, No 3, No 5 or MX hooks/hoses (state hook type) 2,130

1 x long2 x short 115cm

11254072Q

435

11253350Q without

TG540mm

to 1030mm closed 11253358Q

1,225

1,37511254072Q + hooks

11254051QEuro

Width Part No Width Part No and Spec

Euro

120 - 160cm max

without 11250780Q

200 150 - 200cmmax

11250400Qwithout hooks and hoses 1,925

For alternative hook types see back of price list

11260637

Dimensions Part No

Qua

drog

rip

SQUARE BALE

1,125

Optional pressure relief valve 60010270 for telehandler maybe required

120Euro version with welded hooks, Type 3 with bolt on hooks

Sing

le S

pike

M

KII

Euro version with welded hooks

Backstop

16060010270


ROUND BALE ROUND AND SQUARE BALE

Topg

ripPressure Relief Valve

For Flexibal, Flexigrip and Unigrip

Part No 1,275


Euro, No 3, No 5 or MX hooks/hoses (state hook type)

Now with 2 x anti-rotation tines

N.B. For high flow/pressure Telehandler, we recommend a pressure relief valve. Reduces to 180bar

BALE HANDLINGROUND BALE

Flex

ibal

with

inte

gral

tine

s

Flex

igrip

for v

ertic

al s

tack

ing

Uni

igrip

Euro price includes hooks and hoses

Part No and Spec Bale Size Part No and Spec Bale Size Part No

160 120 - 160cmmax


130 90 - 130cm max

1,025


without 11250770Q

Euro, No 3, No 5 or MX hooks/hoses (state hook type) 1,375 1,175


Euro, No 3, No 5 or MX hooks/hoses (state hook type)

184cmmax

Ø89mm

2 Ø129mm

180cmmax






Part No Price

Model Width Hook Part No Price Hook Part No Price140(82) 11251577 445140(125) 11251578 495

Part No Price Part No Price

Part No Price

Model Tines Hook Part No PriceEuro 11251368

Type 3 11251363SMS 11251365Euro 11251378

Type 3 11251373SMS 11251375

Part No Price

Part No Price11260349 9511260348 95


WidthOpen 1280mm Closed 350mm

(Outside to outside of tines)11252050Q 895

Does not include backframe or tines

Extension frame

Hinged Square Bale Fork Options

Designed to ease manoeuvering and spreading of the pallet fork tines without

leaving the tractor.Ideal to clamp plallets/crate when loading or

stacking

DescriptionBig Bag Lifter adapter

5 1,095

140 140cm 2 775

190 190cm

11252335QSMS


2500kg 1,015Includes 2 x hydraulic cylinders

price includes hooks

Width

SQUARE BALE FORKS and PALLET FORKSPALLET FORK (ISO)

Hinged safety frame

Fixed frame

Pallet Fork Accessories (ISO type)

price includes welded hooks

Tine Length

11252211Q 795

Description

Euro

SQUARE BALE

95

Hin

ged

Squa

re

Bal

e Fo

rk

Type 3 11252333Q

11252338QEuro

11252348QEuro

11252345Q

SQUARE BALE

Big Bale Fork Options

Bale Spike AdapterISO type frame

Info

Pallet Fork Accessories (ISO type)

1 short1 Long

295

Requires 3rd service

Pallet Fork Accessories

Tines1 short1 Long

Bale Spike AdapterOld Alo type frame

Will not mount to ISO type backframe

295

925

Will not mount to old Alo type backframe

Big

Bal

e Fo

rk

2 x 125cm2 x 82cm

140cm

PALL

ET F

OR

K

LOA

DER

S

Tines LengthModel

11215030


Log Grab AttachentISO type frame


11251754QExtension frame 11215019

Tines

Pallet Fork Hydraulic Spreader Kit

1000kg version - Small loaders only i.e. small Versa-X, Q21/26

970mm

1220mm

1000kg 970mm

1600kg

825

975

1220mm

Euro 11252308Q

11252303QType 3

SMS 11252305Q

11252328Q

11252323Q

11252325QSMS

Type 3

Euro

MX 11252732Q

SMS

MX 11252712Q

MX 11252722Q

MX 11252732Q


Model Height Capacity Hook Part No Price Model Height Capacity Part No Price Model Height Capacity Part No Price11254361Q 425 11254363Q 825 11254364Q 1,02511254541Q 11254623Q 11254632Q 1,32511254542Q 11254624Q 11254633Q 1,30511254543Q 11254625Q 1,125 11254634Q 1,29011254641Q 11254627Q 1,105 11254635Q 1,25511254544Q 725 11254628Q 1,090 11254636Q 1,30011254547Q 690 11254629Q 1,055 11254637Q 1,27511254548Q 655 11254630Q 1,10011254549Q 700 11254631Q 1,07511254550Q 675

Model Hook Price

Model H/D/W Hook Part No Price Model Width Hook Part No Price

Part No Price

Hook PriceEuroSMS

10377123

Description1200mm Long hoses - kit for Implements to fit directly onto 3rd service valveConversion for older loader To fit hosesbetween 3rd service and tool carrier Q700/900

Big Bag Lifter. Dual & Triple models, capable of lifting two or three bags at once have the extra capacity of 1500kgs (each hook), along with the ability of extending the arm for higher bags to 51cm in 17mm increments

Dual1500

Loaders

Dual1500

Handlers

975

455

FERTILISER BAG LIFTER

BM large

Hook HookW/O

Claas Scorpion BM large

Lifti

ng A

rm

Merlo

OTHER IMPLEMENTSFERTILISER BAG LIFTER

THREE-POINT LINKAGE

SPECIAL FORK

Rear shown

Ideal for stones and cut logs

1,065

1,265Euro

11251548Q

200 2.00m 18 tines

Remember to quote a Counter Weight

147cm 1000kg

575

Single1000

Loaders

Tines

Blade Length

REAR COUNTERWEIGHT

Cou

nter

wei

ght


Single1000

Handlers

HD 170cm Euro

Capacity

Part No

11209793 895

Thre

e-po

int

linka

ge h

itch

H 725 D 780W 810

Small up to 800kg

H 725 D 1030W 810

Large 1000 - 1500kg

11251676 495

55511251661

Lower rear links

Ston

e Fo

rk

Capacities - from 800kg upto a maximum of 1500kg.

Counterweights must be filled by the end user. Model "Large" filled with concrete to position 1 = 1000kg.

Combination of steel and concrete for a weight up to 1500kg

11251435

11251438

Part No

Hose Kit Options

50

130

1214901Attaches to 3 point hitch and Euro

implements attach via pin securing.Ideal for rear and front hitch.

Silo

split

HD

Order counterweight for tractor/loader combinations as per regulation EN12525

Heavy Duty (c/w safety guard)

11251558Q

150 1.50m 15 tines

Lifti

ng A

rm

Lifti

ng A

rm

Matbro Merlo

Manitou JCB Qfit BM large

MXType 3SMSEuroW/O

ROUND BALE

FERTILISER BAG LIFTER

Manitou Merlo

Matbro

Heightadjustable

Heightadjustable

Manitou JCB Qfit

2 x 1500kg

151cmto

204cm

3 x 1500kg

151cmto

204cm

Triple1500

Handlers

Matbro

Claas Scorpion JCB Qfit

SMSEuroW/O


Model Width Capacity Hook Part No Price Model Width Tines Hook Part No Price Model Hook Part No Price1.85m 0.60 m³

73" 18 cu.ft

2.10m 0.68 m³83" 24 cu.ft

Part No Price

Mouth

Model Width Capacity Hook Part No Price1.65m Tines Hook Part No Price

65"

1.90m 75"

2.15m 85"

1.65m 65"

1.90m 75" Part No Price

2.15m 85"

SKIDSTEER IMPLEMENTS

MULTI PURPOSE (Skidsteer)

185SSkid Steer

11251721Q 710

0.66 m³

Sing

le S

pike

M

KII

Fixed frame

GENERAL PURPOSE (Skidsteer)Se

ries

S

185MP 3,020

210MP 3,320

160MP 2,720

For skidsteer connection only.Special order!

2500kg 1150

PALL

ET F

OR

K

WA

LK-T

HR

U.

950

850

1220mm4 in

1

967m

m

0.48 m³

0.48 m³

210S 11251821Q 815

1100

0.56 m³

1000

0.56 m³

210MPT 3,420

185MPT 3,120

160MPT 2,820

Walk-Thru Pallet Fork.The pallet fork frame is specifically designed to suit Skid Steer machines with a forward entry cab so that you can easily and safely enter the cab over the pallet via a sturdy step. In-between the fork frame supports is a walk way (Walk-Thru)

Width

11252461QSkid

11252451QSkid

11252441QSkid

0.66 m³

Skid

11252151QSkid

11252141QSkid

11252161Q

1060mm

Fixed frame pallet forks for SkidSteer with walk through step

PALLET FORK (Skidsteer)

Ski

d

11253974Q

11253978Q

11253980Q

11253988Q

11253990Q

11253994Q

1050

800kg

1500kg

Tines Length

140(125) 2 x 125cm

11251720Q 495

SQUARE BALE (Skidsteer)

Big

Bal

e Fo

rk

140cm Skid

60001611

Price

Left

140

Skidsteer Weld On HooksSkidsteer weld on

Sold as a pair

60001610Right

Big Bale Fork OptionsDescription

Extension frame 11215019 95

2000kg

1060mm

1220mm

1060mm

1220mmROUND BALE (Skidsteer)

4351 x long2 x short

11254051QSkid115cm

Now with 2 x anti-rotation tines

C 11

Price 100 Price 100 Price 100

Price 100 Price 100 Price 100

Price £95 Price £95 Price £75See Other Options page for older loader options

11220063 11209710 11209711

Euro Weld on Ear Euro Weld on Ear Trima Weld On Ear Weld on Ears

Weld on extension ears extend the eye of Euro and Trima hooks to increase crowd

back angle.Affects older implements with flat upright

back.

830513 11251690 11261363

11209714 11209717 11209718

MX Bolt On Hook Alo No 3 Bolt On Hook Trima No 5 SMS Bolt On Hook

65

SMS

65

Euro Standard Bolt On Hook Euro Extended Eye Euro Extended Hook and Eye

10830440

Euro

65

Type 3

830567 830105

L/H & R/H hooks

L/H & R/H hooks

Tack welded together

WELD ON HOOKS, BOLT ON HOOKS, WELD ON HOOK EARS and DIMENSIONSEuro Weld On Hooks Alo No 3 Weld On Hooks Trima No 5 Weld On Hooks HOOK TYPES and DIMENSIONS

856

420

Alo (Type 3)

690

500

Trima (No 5/SMS)

1080

79

530

Euro (No 8)

C 12

Model Type Box Size Part No Price Model Type Box Size Part No Price Model Type Box Size Part No PriceHook 40 & 80 60003104 Hook 40 & 80 60003283 Hook 40 & 80 60003107

40 x 80 60004375 40 x 80 60004375 40 x 80 6000437580 x 80 60004374 80 x 80 60004374 80 x 80 60004374

Model Type Box Size Part No Price Model Type Box Size Part No PriceHook 40 & 80 60003106 Hook 40 & 80 60003105

Model Type Price40 x 80 60004375 40 x 80 6000437580 x 80 60004374 80 x 80 60004374

HEAVY BOLT ON HOOKSJCB Q-fit Kramer/Claas Scorpion Pin and Cone

Then choose 250Then choosePin and Cone U Bolt

Merlo Manitou Volvo BM

U Bolt U Bolt265Q-fit Then choose 280Kramer

If the hook type you require is not shown above, please call your area manager of the Alo UK sales office.

Will mount to 40mm x 80mm box section frames only

Part Number

U Bolt U Bolt Volvo BM Bolt on 11209713 300275Then choose 230Then chooseMerlo Manitou

C 12

Weights of materials KG/m³ % Fill Weights of materials KG/m³ % Fill `

Aggregate (brick) 1820 100 Flour 440 85 1 cubic cm = 0.06102 cubic inches 1 cu cm = 0.06102 cu inAshes 600 85 Glass 2,600 85 1 cubic metre = 35.31467 cubic feet 1 cu m = 35.31467 cu ftAsphalt 1,600 100 Granite chippings 2,655 85 1 cubic metre = 1.31 cubic yards 1 cu m = 1.30795 cu ydBarley 609 85 Gravel (dry) 1,700 85Beet pulp (nuts) 600 85 Lime (quick loose) 850 100 1 cubic inch = 16.38706 cm 1 cu in = 16.38706 cm³Beet pulp (pressed) 900 110 Limestone (crushed) 1,526 100 1 cubic foot = 0.02832 m³ 1 cu ft = 0.02832 m³Bewers grains 1,110 85 Manure (farmyard) 900 85 1 cubic foot = 28316.846 cm³ 1 cu ft = 28316.846 cm³Brick aggregate 1,830 100 Mortar 1,600 100 1 cubic yard = 0.76455 m³ 1 cu yd = 0.76455 m³Bricks (common) 2,450 per 1,000 x Oats 410 85Brick (facing) 2,700 per 1,000 x Peat (dry) 400 100Cement (natural) 895 100 Potatoes 690 85Cement (portland) 1,440 100 Rubble 1,025 100 1 sq. cm = 0.15500 sq. inches 1 sq. cm = 0.15500 sq. inChalk 2,200 100 Refuse (dry) 398 100 1 sq. metre = 10.763 91sq. feet 1 sq. m = 10.763 91 sq. ftClay (fire) 2,080 100 Sand (dry) 1,550 100 1 sq. metre = 1.195 99 sq. yards 1 sq. m = 1.195 99 sq. ydClay (wet) 1,880 100 Sand (wet) 1,900 110 1 hectare = 2.47105 acres 1 ha = 2.47105 acresCoal (anthrace) 896 100 Sawdust 250 110 1 hectare = 0.00386 sq. miles 1 ha = 0.00386 sq. miCoal (bituminous) 1,261 100 Silage (ensiled) 730 110Coal (canneI) 1,261 100 Silage (green) 340 110 1 sq. inch = 6.4516 sq. cm 1 sq. in = 6.4516 sq. cmCoal (newcastle) 1,261 100 Slate 2,723 100 1 sq. foot = 929.0304 sq. cm 1 sq. ft = 929.0304 sq. cmCoal (welsh) 1,261 100 Slurry 1,740 85 1 sq. foot = 0.09290 sq. metres 1 sq. ft = 0.09290 sq. mCoke (loose) 597 85 Snow (fresh) 141 110 1 sq. yard = 0.83613 sq. metres 1 sq. yd = 0.83613 sq. mCoke (petroleum) 700 85 Snow (wet) 514 110 1 acre = 0.40469 hectares 1 acre = 0.40469 haCopper (concentratre) 2,300 85 Sodium chloride (dry/salt) 1,300 85Earth (dry loose) 1,112 100 Sugar beet 540 100Earth (wet packed) 1,550 100 Turnips 540 100Fertiliser (mixed) 1,000 85 Wheat 730 85Fertiliser (nitrate) 1,250 85*These figures are approximate and are used as a guide to material density

Volume Conversions

Measurment Conversions

HELPFUL INFORMATION

Weights of Materials ChartMetric to Imperial Conversions

Imperial to Metric Conversions

Metric to Imperial Conversions

Imperial to Metric Conversions

Retail Order Fixed Carriage Charge

Single option/accessory Appropriate Carriages Costs

Three or more implements Free of charge

Alo UK Area Managers. Important: The following delivery charges will apply to all orders below £2,000 retail if delivered by Alo UK.

A premium will be incurred for other carriers.

Single implement £40.00

IMPORTANT INFORMATION. (Read carefully)

Prices apply in U.K. only and include carriage to U.K. mainland address unless shown as ex-works or orders placed under £2,000 retail value (excluding

V.A.T.)Prices and specifications are subject to alteration without notice

All goods supplied remain the property of Alo UK until full payment is receivedAny delivery dates quoted are approximate only and orders not executed prior

to further price increase will be charged at prices applicable at the time of the despatch.

A refurbishment charge will apply to any goods returned to Alo UK which are not in a resaleable condition, this includes incorrectly ordered goods or

goods no longer required.Parts missing from returned kits/loaders will also be charged.

Boxed goods stored outside will incur a charge.

CLAIMS: No claim for damage or shortage can be entertained unless the carriers and ourselves are notified in writing within three days of delivery

or in the case of non-delivery, within twenty-one days of date of despatch.

IT IS RECOMMENDED THAT ALL HYDRAULIC SETS AND SUBFRAMES ARE INSTALLED BY EXPERIENCED TECHNICIANS. FAILURE TO DO SO MAY

QUESTION THE VALIDITY OF WARRANTY ON THE PRODUCT.

Placement of your order is your agreement to these conditions.

Alo UK Ltd315 Elm DriveHartlebury Trading EstateHartleburyWorcestershire. DY10 4JB. UKPhone: 01299 250922 Fax: 01299 250944E-mail: [email protected]: www.alo.uk.com, www.quicke.uk.com, www.trima.uk.com www.facebook.com/AloUKLtd

Alastair Thomson07713 [email protected]

Edward Grierson07713 [email protected]

Simon Hewitt07836 364233

[email protected]

John Pidgeon07964 005989

[email protected]

Designed and manufactured by ÅlöTM

Alo UK Ltd315 Elm Drive Hartlebury Trading Estate Hartlebury, Worcs DY10 4JB United Kingdom

Tel: 01299 25 09 22Fax: 01299 25 09 [email protected] alo.uk.comfacebook.com/AloUKLtd

Quic

ke D

imen

sionSeries

Documents

Quicke Dimension – Premium Loaders Original … and Implement Retail Price...Quicke Dimension – Premium Loaders . Original Implements. Quicke Dimension . Series. alo.uk.com. Retail