pdf.pngSpring 2013 Sowa Metalworking Solutions Flyer

2013 Spring FlyerPricing valid from April 1 to June 30, 2013

VISIT THE SOWA TOOL

CLEARANCE CENTREHUNDREDS OF GREAT DEALS!

WWW.SOWATOOL.COM

Canadians Supporting Canadians

TURNING INSERTCLEARANCE

• All the most popular styles,grades & breakers.

• Hundreds of different inserts.• Only while quantities last.

Download the list at WWW.SOWATOOL.COM

Over 40% Off!

Visit the Sowa YouTube Channel for all of our new Mitee-Bite product demonstration videos.

www.youtube.com/user/Sowamarketing

PITBULL CLAMPSThe Revolutionary Pitbull® Clamp remains the lowest profile, highest holdingforce clamp in the industry today.High vertical and horizontal clamping forces are generated, considering the sizeof the Pitbull®Clamps.It uses a standard cap screw and an oil resistant O-ring.The Pitbull® Clamp is available in 5 sizes and several styles, a tool steel knifeedge for aggressive stock removal, a tool steel blunt edge for general purposeand a brass version to help prevent marring the workpiece.

Holding ClampsModel Description A B C Force per Pack Code No. SALE $26010 Tool Steel, Blunt Edge .150” .140” .375” 650 lbs 8 604-080 86.4926030 Tool Steel, Blunt Edge .200” .187” .500” 1500 lbs 8 604-083 91.8026050 Tool Steel, Knife Edge .300” .280” .750” 3600 lbs 6 604-085 89.01

**For our listing of top selling Mitee-Bite products see pages H32-H40 of theSowa Metalworking Solutions Catalogue

Save 10%

Also check out the article from Shop MetalworkingTechnology Magazine. Straitline Components talksabout using Mitee-Bite low profile clamping and themajor impact it has had on their business.

www.sowatool.com

Distributed by:

2

Model Jaw Width Opening Jaw Height Code No. SALE $ 3˝ 6˝ 8˝ 2˝ 382-015 902.164˝ 7˝ 12˝ 2.4˝ 382-025 1,387.894˝ 7˝ 16˝ 2.4˝ 382-030 1,571.225˝ 8˝ 12˝ 2.6˝ 382-040 1,702.12

Features/Benefits:• High accuracy• Unlimited clamping range• High quality alloy steel• High clamping pressure• No jaw lift• All vises are matched

GS PLAIN BASE MODULAR VISES 5 PC COBALT METRICCOUNTERSINK SETS

SCREW JACK SETS

ModelNo. Set Includes Code No. SALE $

VSJ-A VSJ-70 70-85mm Adj. Capacity Screw Jack - 2 pcs. 333-400 162.26VSJ-150 100-150mm Adj. Capacity Screw Jack - 2 pcs.Pads included: 1A, 2A, 3A, 4A, 5A, 6A - 1ea.

VSJ-B VSJ-150 100-150mm Adj. Capacity Screw Jack - 2 pcs. 333-410 268.66VSJ-250 140-230mm Adj. Capacity Screw Jack - 2 pcs.Pads included: 1A, 2A, 3A, 4A, 5A, 6A - 1ea.

Features:• Material: S45C• Support heavy weight• Suitable for irregular workpieces.• Rapid Setting & Fixed

• M35 Cobalt• Wide flutes provide good chip evacuation• Positive cut• Constant profile aids regrinding of the tool• Self-centering of the cutting mill (three bearing points)• Virtually eliminates vibration

SpecialDescription Code No. NET $Cobalt sets include 6.3mm, 10.4mm, 16.5mm, 20.5mm, 25.0mm82º 121-860 199.0090º 121-865 199.00TiN Coated sets include 10.4mm, 16.5mm, 20.5mm, 25mm, 31mm82º 121-870 279.40

Made InFrance

121-86590º

121-87082º

DIGITAL PROTRACTORSLEVEL TYPE

Range Resolution Accuracy Code No. SALE $ 360º 0.1º ±0.1º 287-520 100.24360º 0.1º ±0.1º 287-521* 112.21

* Comes with magnetic base

Code No.: 113-651List: $198.00 $143.28

POCKET REFERENCE BOOK4TH EDITION

Information for do-it-yourselfers, engineers, craftsmen,students, teachers, managers, maintenance & industrialpersonnel, and travelers. The ultimate reference andproblem solver. The uses for this book are endless! 864pages of valuable information in an easy to use pocketreference book. 3.2” x 5.4” x 0.8”

• Automotive • Geology• Steels & Metals • Math• Electrical • Welding• Tools • Conversion tables• Weights & Properties • and much moreof materials

Code No.: 180-175List: $19.99

$17.25

Features:• This protractor provides an immediate digitalreading of any angle in a full circle with 0º-90º-0º-90º-0º readings.

• ABS/ZERO button allows two measuring modes, Standard and Alternate Reference

• Four 90º quadrants for display purposes• HOLD button for freezing a reading in an unreadable position• V-grooves on top and bottom for use on curved surfaces

LARGE DISPLAY CALIPERS

Features:• Extra large (5/8”) LCD readout• Inch - Metric conversion• Automatic Off feature extendsbattery life

• Automatic On feature is activated by moving slider. The origin position is retained through the off/on cycle

Range Resolution Accuracy Code No. SALE $ 0-8”/0-200mm .0005”/0.01mm ±.0015” 286-575 100.660-12”/0-300mm .0005”/0.01mm ±.0015” 286-580 169.47

ARTICULATED MAGNETIC BASE

Features:• Arm has 3 articulating joints that can be locked with the single hand knob

• For Indicators with 3/8 stems and/or Lug backs with 1/4” hole dia.

• On/Off switch

Model Pull Action Code No. SALE $Type II 132lbf 287-192 56.98

Save 30%

Save 30%

Save 30%

Save 30%

Save 30%

HSSE-V3% VanadiumFor tough materials including: • High Carbon Steel• High Alloy• Titanium• Aluminum

Set consists of the following: Taps - 6-32 to 1/2"-13Drills - #36, #29, #25, #21, #7, F, 5/16, U, 27/64

YELLOW RINGTAP & DRILL SET

3

CORNER ROUNDING END MILLS

IMPACT HARDNESS TESTER

Code No. SALE $ 286-526 2,621.58

COOLANT PROOFDIGITAL CALIPER

Features:• Coolant resistant• Inside, outside, step anddepth measurements

• Inch/Metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button

Range Graduation Code No. SALE $ 0-8”/0-200mm .0005”/0.01mm 200-950 186.97

Specifications• Air Inlet (N.P.T.): 1/4”• Air Consumption (Loading): 13 cfm • Exhaust System: Rear• Aluminum Alloy housing

Air NetHorse Collet Pressure O.A.L. WeightPower RPM Size (psi) (in.) (lb) Code No. SALE $ 0.9 9,000 1/4”(6mm) 90 9-1/4 2.28 174-056 151.27

105º DIE GRINDERTP-9059

Offering interactive math, the new latest edition CD continuesto combine the complete contents of the Handbook with thepower, versatility, and convenience of Adobe PDF. These compact files can be viewed, navigated, and printed exactly asthey appear by anyone with Adobe Acrobat Reader, which isincluded free on this disk. Now more than ever the CD combined with print edition is the most powerful tool you'llneed to easily and effectively perform your job!

Features:• Used for determining the hardness of ferrous and non-ferrous metals

• Hardness is displayed in an “L” value that can be converted into Brinell, Rockwell, Vickers, andShore Hardness.

Specifications:• Range: 330-890HL• Impact capacity: 11 Nmm• Dimensions: ø20 x 150mm• Testing direction: Arbitrary• Power: DC 6.0 V• Mass of impact body: 5.5g• Diameter of carbide ball: 3mm

MACHINERY’S HANDBOOK &CD-ROM COMBO

8PC DRIVE PIN PUNCH SET

MAGNETIC SINE PLATES

Precision ground, hardened to HRC58 andnormalized by a sub-zero treatment. Rolls arehardened and ground to an accuracy of0.001mm. High precision of parallelismwithin 0.002mm and squareness within0.005mm. Set-up and dressing time reduced to a bare minimum due to simplicityof set up. (Angle 0°, 60°)

Model Width x Length Height Code No. SALE $ YCT-47M Magnetic 100 x 175 mm 60 mm 230-770 764.40YCT-66M Magnetic 150 x 150 mm 60 mm 230-775 840.84

• Made of tool steel • Knurled body for better grip• Hardened both ends, Rc 45 to 52• 4" length• Supplied in fitted pouch with clear size markings

SpecialDescription Code No. NET $ 1/16, 3/32, 1/8, 5/32, 3/16, 7/32 606-250 20.491/4, 5/16

Features:• Range Per Rev. .1”• Stem Dia. 3/8• Dial face dia. 1.65”• Lug Back• Jeweled bearings

• High Speed Steel

AGD1 DIAL INDICATORS

Range Graduation Dial Reading Code No. SALE $ 0-.25” .001” 0-100 286-700 49.560-.25” .001” 0-50-0 286-702 49.56

Save 30%

Save 40%

Save 10%

Save 30%

Save 30%

Save 30%

Save 30%

Save 40%

Kit Contents Insert Code No. SALE $

2” Face Mill c/w 10 APKT 1604 PDSR M PM30P 149-907 217.172-1/2” Face Mill c/w 10 APKT 1604 PDSR M PM30P 149-908 254.703” Face Mill c/w 10 APKT 1604 PDSR M PM30P 149-909 279.274” Face Mill c/w 10 APKT 1604 PDSR M PM30P 149-910 319.325” Face Mill c/w 10 APKT 1604 PDSR M PM30P 149-911 613.26

x10

Consists of:1 - APFM 16-90 Face Mill10- APKT 1604 Inserts

APFM FACE MILL KITS

Radius Shank Dia. Largest Dia. Code No. SALE $ 3⁄32˝ 3⁄8˝ 1⁄2˝ 136-751 11.271⁄4˝ 3⁄4˝ 1˝ 136-757 30.87

Code No. SALE $ 180-180 252.63

4

2 FOR 1 CALIPER PROMO

• New latch clamping system ensures strong cutting force and easy insert replacement• Double sided inserts have 8 cutting edges

Only 16 left available!

Only 17 left available!

RM8 MILLING KITS

INSERT SURPLUS

• Works best on straight edges on most materials. • Made of H.S.S. hardness 62-64RC.• Included angle 55º• Packs of 10

S35 DEBURRING BLADE

SpecialCode No. NET $ 165-030 1.15/pc

ClearanceInsert Description Code No. Price $

TURNINGCNMG432-F2 PT20C 147-790 6.42WNMG332-F2 PT20S 147-952 5.82SCMT32.52-F3P KT10C 147-955 5.94CCMT432-F3P PT15C 148-003 7.80CNMA542 KT15C 148-670 10.02

MILLINGADKT1505PDSR PM10C 147-880 10.80APKT160464R-M PM30P 148-402 10.80OFKT05T3SN-F2 KM20C 147-760 13.50TCMT32.52T1-F3P MM30P 147-986 6.78

SpecialDescription Code No. NET $

3” 45º Milling Kit 500-2471pc RMT8AA4300R-M 6-Flute Rich Mill (2100118)20pc SNMF1206ANN-MM PC3525 Inserts (2100586)

List $1,659.40


4” 45º Milling Kit 500-248 499.001pc RMT8AA4400R-M 8-Flute Rich Mill (2100120)20pc SNMF1206ANN-MM PC3525 Inserts (2100586)

List $2,007.90

Limited

Supply!

18

Ø3.0 Ø4.0~Ø6.0 Ø8.0~Ø10.0 Ø12.0 (inch)

DesignationPC3500 PC3545 PC6510 PC5300 at

Grade Dimensions (inch)

SNCF 1206ANN-MM 0.500 0.260 0.5501206ANN-MF 0.500 0.260 0.550

SNMF 1206ANN-MM 0.500 0.260 0.5501206ANN-MF 0.500 0.260 0.550

SNCF 1507ANN-MM 0.625 0.289 0.0591507ANN-MF 0.625 0.289 0.059

SNMF 1507ANN-MM 0.625 0.289 0.0591507ANN-MF 0.625 0.289 0.059

SN F ANN

RMT8A Insert

RMT8A Cutter

RMT8AA4000/5000

Stock item, Under preparing for stock P M K S N

Stock item, Under preparing for stock

DesignationStock

RMT8AA 4300R/L4400R/L4500R/L4600R/L4800R/L41000R/L41200R/L

RMT8AA 4300R/L-M4400R/L-M4500R/L-M4600R/L-M4800R/L-M41000R/L-M41200R/L-M



5 3 3.78 2.205 1.0 0.374 0.248 0.866 2.0 3.526 4 4.803 2.874 1.3 0.500 0.319 0.866 2.0 5.068 5 5.748 3.386 1.5 0.626 0.394 1.181 2.5 9.4610 6 6.732 4.882 2.0 0.748 0.433 1.181 2.5 14.312 8 8.74 5.118 2.5 1.000 0.551 1.496 2.5 19.3616 10 10.748 7.087 2.5 1.000 0.551 1.496 2.5 31.0220 12 8.819 9.449 2.5 1.000 0.551 1.496 2.5 49.066 3 2.953 2.205 1.0 0.374 0.248 0.866 2.0 3.528 4 3.996 2.874 1.3 0.500 0.319 0.866 2.0 5.0610 5 4.961 3.386 1.5 0.626 0.394 1.181 2.5 9.4614 6 5.965 4.882 2.0 0.748 0.433 1.181 2.5 14.318 8 7.953 5.118 2.5 1.000 0.551 1.496 2.5 19.3622 10 9.961 7.087 2.5 1.000 0.551 1.496 2.5 31.0228 12 11.969 9.449 2.5 1.000 0.551 1.496 2.5 49.065 3 3.937 2.205 1.0 0.374 0.248 0.866 2.0 3.966 4 4.961 2.874 1.3 0.500 0.319 0.866 2.0 5.728 5 5.945 3.386 1.5 0.626 0.394 1.181 2.5 9.4610 6 6.929 4.882 2.0 0.748 0.433 1.181 2.5 14.312 8 8.937 5.118 2.5 1.000 0.551 1.496 2.5 19.816 10 10.945 7.087 2.5 1.000 0.551 1.496 2.5 31.6820 12 12.953 9.449 2.5 1.000 0.551 1.496 2.5 48.846 3 2.953 2.205 1.0 0.374 0.248 0.866 2.0 3.968 4 3.996 2.874 1.3 0.500 0.319 0.866 2.0 5.7210 5 4.961 3.386 1.5 0.626 0.394 1.181 2.5 9.4614 6 5.965 4.882 2.0 0.748 0.433 1.181 2.5 14.318 8 7.953 5.118 2.5 1.000 0.551 1.496 2.5 19.822 10 9.961 7.087 2.5 1.000 0.551 1.496 2.5 31.6828 12 11.969 9.449 2.5 1.000 0.551 1.496 2.5 48.84

R L ØD ØD1 ØD2 Ød F lbsa b E

Rich Mill-RMTRMT8A Cutter | RMT8A Insert

18

Ø3.0 Ø4.0~Ø6.0 Ø8.0~Ø10.0 Ø12.0 (inch)

DesignationPC3500 PC3545 PC6510 PC5300 at

Grade Dimensions (inch)

SNCF 1206ANN-MM 0.500 0.260 0.5501206ANN-MF 0.500 0.260 0.550

SNMF 1206ANN-MM 0.500 0.260 0.5501206ANN-MF 0.500 0.260 0.550

SNCF 1507ANN-MM 0.625 0.289 0.0591507ANN-MF 0.625 0.289 0.059

SNMF 1507ANN-MM 0.625 0.289 0.0591507ANN-MF 0.625 0.289 0.059

SN F ANN

RMT8A Insert

RMT8A Cutter

RMT8AA4000/5000

Stock item, Under preparing for stock P M K S N

Stock item, Under preparing for stock

DesignationStock





5 3 3.78 2.205 1.0 0.374 0.248 0.866 2.0 3.526 4 4.803 2.874 1.3 0.500 0.319 0.866 2.0 5.068 5 5.748 3.386 1.5 0.626 0.394 1.181 2.5 9.4610 6 6.732 4.882 2.0 0.748 0.433 1.181 2.5 14.312 8 8.74 5.118 2.5 1.000 0.551 1.496 2.5 19.3616 10 10.748 7.087 2.5 1.000 0.551 1.496 2.5 31.0220 12 8.819 9.449 2.5 1.000 0.551 1.496 2.5 49.066 3 2.953 2.205 1.0 0.374 0.248 0.866 2.0 3.528 4 3.996 2.874 1.3 0.500 0.319 0.866 2.0 5.0610 5 4.961 3.386 1.5 0.626 0.394 1.181 2.5 9.4614 6 5.965 4.882 2.0 0.748 0.433 1.181 2.5 14.318 8 7.953 5.118 2.5 1.000 0.551 1.496 2.5 19.3622 10 9.961 7.087 2.5 1.000 0.551 1.496 2.5 31.0228 12 11.969 9.449 2.5 1.000 0.551 1.496 2.5 49.065 3 3.937 2.205 1.0 0.374 0.248 0.866 2.0 3.966 4 4.961 2.874 1.3 0.500 0.319 0.866 2.0 5.728 5 5.945 3.386 1.5 0.626 0.394 1.181 2.5 9.4610 6 6.929 4.882 2.0 0.748 0.433 1.181 2.5 14.312 8 8.937 5.118 2.5 1.000 0.551 1.496 2.5 19.816 10 10.945 7.087 2.5 1.000 0.551 1.496 2.5 31.6820 12 12.953 9.449 2.5 1.000 0.551 1.496 2.5 48.846 3 2.953 2.205 1.0 0.374 0.248 0.866 2.0 3.968 4 3.996 2.874 1.3 0.500 0.319 0.866 2.0 5.7210 5 4.961 3.386 1.5 0.626 0.394 1.181 2.5 9.4614 6 5.965 4.882 2.0 0.748 0.433 1.181 2.5 14.318 8 7.953 5.118 2.5 1.000 0.551 1.496 2.5 19.822 10 9.961 7.087 2.5 1.000 0.551 1.496 2.5 31.6828 12 11.969 9.449 2.5 1.000 0.551 1.496 2.5 48.84

R L ØD ØD1 ØD2 Ød F lbsa b E

Rich Mill-RMTRMT8A Cutter | RMT8A Insert

x20

AIR TAPPING UNITS

Tap Range Speed (rpm) Work Range Code No. SALE $ #10 - 1/2” 400 700mm 326-700 2,407.13#10 - 1/2” 400 200-700mm 326-705 2,676.83

• Air tapping spindle• Parallel arm• Table mounting column• Air combination• 6 ANSI Tap Collets Included• Radial jib• Without stand plate• Air pressure: 6~8 kgs/cm3

• Requires: 5HP compressor

FREE 6” DIAL CALIPER

Buy one 8” Digitial Caliper (286-502) @ List $137.60 -25%

Order by Promo Code # 500-246

Features:• Sturdy Aluminum diecast housing can be

used in the harshest of manufacturing environments.

• The dual pinion mechanism offers ultra smooth feel

• Preloaded pinion provides better repeatability• Thumbwheel

12˝ DIE CAST ALUMINUMDIAL CALIPER

Range Graduation Range per Rev Code No. SALE $ 0-12” .001” .100” 286-860 169.26

Features:• Extra large LCD readout• Inch - Metric conversion

DIGITAL CALIPERS

Range Resolution Accuracy Code No. SALE $ 0-6” / 0-150mm .0005” / 0.01mm ±.001” 286-500 56.210-8” / 0-200mm .0005” / 0.01mm ±.001” 286-502 96.320-12” / 0-300mm .0005” / 0.01mm ±.0015” 286-504 164.85

Save 40%

Save 30%

Save 30%

$499.00

$399.00

Save 25%

And Get 1pc 6” Dial Caliper(286-834) Absolutely FREE(List $75.20)

INCREDIBLE DEAL!!

COMPARE!

$103.20

5

12” HACKSAW FRAME

A rugged heavy-duty industrial qualityhacksaw designed for the professional.• Strong aluminum die cast handle• Guarded grip design• Comes complete with a 12” chromesteel hacksaw blade

Model O.A.L. Bow Depth Code No. SALE $ HF/12/BC 17-5/16” 4” 231-370 13.43

ALUMINUM DRUM WRENCH

An easy & convenient tool to open all typesof drums. Ends of the wrench are designedto fit perfectly onto most 2” and 3/4” drumplugs.• Hardened and tempered cast aluminum for increased strength

• Compact design for easy storage

Model Code No. SALE $ DRW/AL-01 231-398 17.03

HEAVY DUTY LEVER GREASE GUN

Top of the line grease gun designed forheavy industrial applications.• Develops 10,000 psi• Variable stroke feature• High tolerance aluminum die cast head• Complete with 6” steel extension

Model Code No. SALE $ G1R/HD/N 231-380 28.95

80PC SAE GREASE FITTINGASSORTMENT

Contents:• 1/8”-27 PTF - 25pcs straight, 10pcs 45º, 10pcs 90º• 1/4”-28 SAE-LT - 15pcs straight, 10pcs 45º, 10pcs 90º

Model Code No. SALE $ GFT/KIT/SAE-80 231-386 40.05

PISTOL GREASE GUN

One hand operated grease gun designedfor use in confined spaces.• Heavy duty aluminum die cast head• Develops 5,000 psi• 12” flexible hose

Model Code No. SALE $ G5F/N 231-384 28.95

HAND ROTARY BARREL PUMP

• Dual Directional Operation allows the pump to both empty, as well as refill containers

• Extremely heavy duty and rugged• Pump body is sturdy cast iron with precisely machined cast iron vanes for better draw and smoother delivery

• Fits 15-55 gallon barrels• Complete with suction tube, 2” cast iron bung nut, and discharge spout

Model Code No. SALE $ GNB-25/3R/SPL 231-390 78.38

MINI PISTOL GREASE GUN

One hand pistol grip grease gun with convenientpull type operating mechanism• Capacity: 3oz cartridge• 3,500 psi• Zinc plated finish• Complete with 4” steel extension

Model Code No. SALE $ G-16/ZN/N 231-382 18.68

Premium powder coated steel pump body with ribbed sectionaluminum die cast pump head for maximum strength.• Built-in 1-1/2” & 2” bung for use on drums• Plated steel lever handle with rubber grip• Complete with curved metal spout and telescopic suction tube for use on 15-55 gallon barrels

Model Code No. SALE $ LBP/04 231-388 39.23

LEVER ACTION BARREL PUMP

This series of oil cans have a modern andcontemporary design with a dome shapedbody. Most popularly used oil can style allover the world. Manufactured with a steelpump, powder coated red body, and aflexible wire braided extension.

LEVER TYPE OIL CANS

SpoutModel No. Capacity Length Code No. SALE $ MP21F 200 ml 6” 231-392 6.83MP22F 300 ml 6” 231-394 7.20MP23F 500 ml 7” 231-396 7.88

NNEEWW PPRROODDUUCCTTSS

Save 25%

Save 25%

Save 25%

Save 25%

Save 25%

Save 25%

Save 25%

Save 25%

Save 25%

6

$106.00

SINGLE BEAM DIGITALHEIGHT GAUGES

Features:• Large LCD display• Hand wheel design for fine adjustment• Inch/Metric conversion• Carbide tipped scriber• Zero setting on any position

Range Resolution Accuracy Code No. SALE $ 0-18” / 0-450mm .0005” / 0.01mm ±.0015”/.04mm 287-126 535.360-24” / 0-600mm .0005” / 0.01mm ±.0020”/.05mm 287-128 619.15

CARBIDE END MILL SETS

CHIP HOOKS

• Micrograin carbide• Bright finish

Sets contain 1pc each of 1/4”, 5/16”,3/8”, 1/2”, 5/8”, 3/4”

SpecialModel Base Dia. Mag. Pull Code No. NET $

MMS/DA-4 1-1/8” 5 kg 231-140 20.83MMS/DA-5 1-3/8” 8 kg 231-142 22.02

8” CALIPER /DRILL SET COMBO

MINI MAGNET BASES

Contents:• 8”/200mm .0005”/0.01mm Digital Caliper 286-502

• 29pc Black Oxide Jobber Drill Set 1/16”-1/2” by 64ths105-375

This range of handy magnetic stands provide a simple &inexpensive way of holding dial indicators on any flatferrous surface. To activate simply pull out the basefrom contact face. Available with or without fine fitting.


2 flute 103-846 233.004 flute 103-847 233.00

For removing chips and cleaning the chip trays on your machines.Black finished steel hooks.The Chip Hooks include a plastic protective guard.NogaGrip Handle designed for maximum comfort in your hand.

Features:• Water-proof lighting head with reinforced glass resists

large temperature fluctuations of cutting oil.• 110 voltage

COOLANT-PROOF INDICATOR/MAG BASE COMBO

Contents:• 8” .001” Stainless Steel Dial Caliper 200-584

• Engineers Black Book 180-155

8” DIAL CALIPER/ENGINEERS BLACK BOOK COMBO

SpecialCode No. NET $ 500-135 87.50

Contents:• 0-.4” .0005” 0-50 Dial Indicator 200-075• BA-1F Fine Adjustment Magnetic base 225-700


50MM DIGITAL GEARTOOTH CALIPER

WATER-PROOF HALOGEN LAMPS

Model Arm Length Base Width Code No. SALE $ VHL-400L 400 x 400mm 79mm 326-335 137.83VHL-400M 220 x 220mm 79mm 326-340 137.83

Range Resolution Accuracy Code No. SALE $ 5-50mm .0005”/0.01mm ±.03mm 285-776 394.10

Code No.: 500-238List: $256.10

Save 30%

Save 30%

Save 30%

Save 25%

Model Length Code No. SALE $SP2500 400mm 165-488 25.35SP2550 600mm 165-490 28.65

• IP54 water proof series: with selaed housing & water resistant ring

• Easy to read Ø58mm dial face• Internal tolerance marker• With counter pointer• Flat back (attached) and lug back supplied• Jeweled• Accuracy ±0.0015”

Save 30%Features:

• Zero-setting at any position• Inch/Metric conversion• Measures the chordal gear tooththickness at the chordal addendum(pitch circle)

Range/Range Graduation Rev Reading Code No. SALE $0-0.4” .0005” .05” 0-50 286-754 66.43

WATER PROOF AGD2DIAL INDICATOR

NEW PRODUC

T!

7

Regular Length

Long Length

• Special geometry allows for high chip loads andfeed rates.

• 3 flute design excellent for slotting and profilingat high speeds.

• Made from premium submicron grain carbide. • Cutting diameter tolerance +.000/-.002

Cutting Shank Flute Overall Bright TiCNDia. Dia. Length Length Corner Finish Coated(in.) (in.) (in.) (in.) Radius Code No. SALE $ Code No. SALE $ 1/4 1/4 1-1/8 3 0.005 153-170 24.44 153-434 28.285/16 5/16 1-1/8 3 0.005 153-172 27.24 153-436 34.913/8 3/8 1-1/8 3 0.005 153-174 38.74 153-438 44.271/2 1/2 1-1/2 4 0.005 153-176 58.44 153-440 68.641/2 1/2 2 4 0.005 153-178 58.44 153-442 68.645/8 5/8 2-1/4 5 0.005 153-180 111.67 153-444 131.823/4 3/4 2-1/4 5 0.005 153-182 144.24 153-446 188.111 1 2-1/4 5 0.005 153-184 253.63 153-448 304.72

Cutting Shank Flute Overall Bright TiCNDia. Dia. Length Length Corner Finish Coated(in.) (in.) (in.) (in.) Radius Code No. SALE $ Code No. SALE $ 1/8 1/8 3/8 1-1/2 0.005 153-150 10.40 153-044 12.353/16 3/16 5/8 2 0.005 153-152 13.98 153-046 16.771/4 1/4 3/4 2-1/2 0.005 153-154 18.72 153-048 22.495/16 5/16 13/16 2-1/2 0.005 153-156 24.44 153-050 31.663/8 3/8 1 2-1/2 0.005 153-158 28.08 153-052 33.487/16 7/16 1 2-3/4 0.005 153-160 39.78 153-054 47.781/2 1/2 1-1/4 3 0.005 153-162 47.19 153-056 54.215/8 5/8 1-5/8 3-1/2 0.005 153-164 81.38 153-058 93.603/4 3/4 1-5/8 4 0.005 153-166 129.22 153-060 143.911 1 1-1/2 4 0.005 153-168 205.60 153-062 246.74

3-FLUTE CORNER RADIUSCARBIDE END MILLS FOR

ALUMINUM Consists of:1 - 2-1/2” AMFM Face Mill 147-8344 - VCKT 43.57.5 NA KT10U Inserts 147-425

(polished for aluminum)

ALUMI MILL KIT

PRO PART-OFF KITS

2405-KA POWER CHUCK

2-6” DIAL BORE GAUGE

Consists of:1 - PP-B Part Off Blade10 - SP300 3mm Inserts (Coated)1 - SW15S Wrench

• Made of precision ground, hardened stainless steel• Accuracy according to DIN875

Holder Inserts Code No. SALE $

PP-B 326S 1” Blade (146-232) SP300 PT30C (146-452) 149-835 199.00PP-B 332S 1-1/4” Blade (146-898) SP300 PT30C (146-452) 149-836 199.00

Size Squareness Code No. SALE $

2” x 1.6” 00 287-560 22.613” x 2” 00 287-562 24.436” x 4” 00 287-566 38.998” x 5” 00 287-568 50.89

8” x 5” (Wider Base) 00 287-576 91.07

Kit Consists of:1 - 5/8” ø B/Bar, SI-SCLCR 10-3 (#145-925)1 - 3/4” ø B/Bar, SI-SCLCR 12-3 (#145-926)1 - 1” ø B/Bar, SI-SCLCR 16-3 (#145-927)

10 - CCMT 32•51 inserts (#146-470)1 - wrench (#146-940)

Standard accessories:• Chuck and jaw mounting bolts• Reversible top jaws hardened and ground• T-nuts• Blank Draw Bar Nut• Key for chuck installation• Special insert set

TACKLE BOX WITH THE PURCHASE OF A MASTER BORING BAR KITFREE

+ =Code No.: 149-844K $230.90

* Limited quantities available

Model Size Mount Code No. SALE $ 2405-KA 8” A6 468-115 2,620.80

Range Graduation Probe Depth Code No. SALE $ 2-6” .0001” 6” 286-658 235.97

• 11pcs• 2” sub-anvil• .0001” graduation• movable probe pin with carbide ball

BEVEL EDGE SQUARES

Save 30%

Save 30%

Save 35%

Save 25%

$199.00

EXCELLENT DEAL!

Code No.: 149-928

(Boring bars will fit into the case)

KEYWAY BROACH SETS WITH COLLARED BUSHINGS

HASSAY SAVAGE

HASSAYSAVAGE

Dura-CaseModel No. Description EDP No. Code No. SALE $

#18 Metric 4 Broaches: 4mm-II, 5mm-II, 6mm-III, 8mm-III 15418 182-066 451.359 Bushings: 12mm-II, 14mm-II, 16mm-II, 18mm-II,

20mm-III, 22mm-III, 24mm-III, 26mm-III, 28mm-III18 Keyway Combinations

#40 Metric 6 Broaches: 2mm-I, 3mm-I, 4mm-II, 5mm-II, 6mm-III, 8mm-III 15440 182-068 735.0818 Bushings: 16mm-II, 18mm-II, 18mm-III, 19mm-III,

20mm-III, 22mm-III, 24mm-III, 25mm-III,26mm-III, 28mm-III, 30mm-III, 32mm-III,34mm-III, 36mm-III

36 Keyway Combinations#1 3 Broaches: 1-1/16-I, 3/32-I, 1/8-I 15315 182-050 220.92

5 Bushings: 1/4-I, 5/16-I, 3/8-I,7/16-I, 1/2-I15 Keyway Combinations

C-1 4 Broaches: 1/8-II, 3/16-II, 1/4-III, 3/8-III 15318 182-052 386.169 Bushings: 1/2-II, 5/8-II, 3/4-II, 7/8-II, 1-III, 1-1/8-III,

1-1/4-III, 1-3/8-III, 1-1/2-III18 Keyway Combinations

C-10 4 Broaches: 1/8-II, 3/16-II, 1/4-III, 3/8-III 15336 182-062 494.1118 Bushings: 1/2-II, 9/16-II, 5/8-II, 11/16-II, 3/4-II,

13/16-II, 7/8-II, 15/16-III, 1-III, 1-1/16-III, 1-1/8-III, 1-3/16-III, 1-1/4-III, 1-5/16-III, 1-3/8-III, 1-7/16-III, 1-1/2-III, 1-9/16-III

36 Keyway Combinations

MADE IN THE USA

Features:• .100” Range Per Rev.• Hardened stainless steel

DIAL CALIPERS

Range Resolution Accuracy Code No. SALE $ 0-6” .001” ±.001” 286-834 52.640-8” .001” ±.0015” 286-838 76.02

MAGNETIC BASE

Features:• For Indicators with 3/8” stems and/or Lug backswith 1/4” hole dia.

• On/Off switch

Features:• For easily and quickly cleaning spindle holes.• Plastic body, the taper wiper is made of special cotton material therefore not damaging the spindle.

• The BT & DIN tapers are the same.

SPINDLE TAPER WIPERS

Features:• Flexible arm• LED light (VCC-21 only)

MAGNETIC CHIP COLLECTORS

Model Length Capacity Code No. SALE $ VCC-20 21” 12lb 230-640 23.59VCC-21 21” 0.7lb 230-645 24.36

• High cutting speed• Long tool life• Each insert has four cutting edges• Contains one holder plus one insert

90º ENGRAVING TOOL SET

Shank Model No. Length Insert Code No. SALE $ 3/8” 00-99616-3/8-02SW 90mm N9MT080201W-NC40 612-153 99.00

• High cutting speed• Long tool life• Each insert has four cutting edges• Suitable for centering, chamfering and engraving.• Contains one holder plus one insert

90º NC SPOT DRILL SETS

Shank Model No. Length Insert Code No. SALE $ 3/8” 00-99616-10-3/8-02S 3.54” N9MT080208CT-NC40 612-002 99.005/8” 00-99616-14-5/8-02S 4.00” N9MT11T3CT-NC40 612-010 99.00

8

Model Taper Total Length Code No. SALE $ VTW-40 #40 159mm 326-215 19.18VTW-50 #50 265mm 326-220 27.93

Save 15%

Save 30%

Save 30%

Save 30%

Save 30%

Model Pull Action Code No. SALE $With 6” rod & universal clamp 132lbf 287-200 25.76

Features:• Range Per Rev. 0.1” for 1”• Range Per Rev. 0.01” for .05”• Stem Dia. 3/8”• Dial face dia. 2.20”• Lug Back

AGD2 DIAL INDICATORS

PERMANENT MAGNETIC LIFTERS

Features:• Faster and Safer than using straps and slings.• Beveled surface for lifting round objects.• Magnets are maintenance free and never wear out.• Magnets have built-in safety factor of 3.5 times the rated load. Do Not lift more than the maximum rated load.

Model Capacity (lb) Code No. SALE $ VML-100 220 230-600 359.03VML-300 660 230-605 908.18VML-600 1320 230-610 1,486.10

SOFT JAW FORMING RINGS

The forming ring is used for cutting soft jaws byclamping and extending the thru hole to increase theaccuracy of clamping the workpiece

• High Speed Steel

Contents:• 1/16” - 1/2” by 64ths• A - Z• #1 - #60

115PC 3-IN-1 DRILL SET

Features:• Locking clamp• Carbide faces• Satin chrome finish

9

DM1226FAST DRILL RE-SHARPENING MACHINE

Patented Features

• Double-bearing grinding unit (reduces wear).• Drill tightened design with bearing device.• Adjustable trimming angle.

Standard Accessories

• ER40 Collets, 12mm-26mm (15pcs).• CBN Dia. wheel #200x1pc (for HSS drill).• 3mm and 4mm Hexagon (Hex.) wrench x 1 pc each.

DM213FAST DRILL RE-SHARPENING MACHINE

Patented Features

• Double-bearing grinding unit (reduces wear).• Drill tightened design with bearing device.• Adjustable trimming angle.

Standard Accessories

• ER20 Collets, 2.5mm-13mm (12pcs).• CBN Dia. wheel #200x1pc (for HSS drill).• 3mm and 4mm Hexagon (Hex.) wrench x 1 pc each.

Model DM213Code No. 326-130List Price $1,720.00

Sale Price $1,110.00Drill Diameter: Ø2mm - Ø13mmPoint Angle: 85° ~ 140°Power Supply: AC110 / AC220 50/60HZMotor: 90WR.P.M: 6000RPMWeight: 10 kg

Model DM1226Code No. 326-134List Price $4,003.90

Sale Price $2,574.36Drill Diameter: Ø8mm - Ø30mmPoint Angle: 85° ~ 140°Power Supply: AC110 / AC220 50/60HZMotor: 450WR.P.M: 4000RPMWeight: 25 kg

Premium Drill Sharpening Machines


Save 30%

Save 30%

Save 30%

Save 30%

GRANITE SURFACE PLATES

These plates are made of the highest quality – True Black – Fine Grained– Non-porous – Jewel Hardness – Granite available to give years of longlasting service.Specifications:Compressive Strength 7329 lbs. / in 2Water Absorptivity 0.13%

Model Capacity (lb) Code No. SALE $ VFR-06 6” 326-255 227.08VFR-08 8” 326-260 261.38VFR-10 10” 326-265 275.17VFR-12 12” 326-270 412.79

Range Graduation Code No. SALE $0-3” (3 pc set) .0001” 285-150 119.000-6” (6 pc set) .0001” 285-154 275.03

Range Graduation Dial Reading Code No. SALE $ 0-1” .001” 0-100 286-722 34.370-.05” .0001” 10-0 286-727 82.32

OUTSIDE MICROMETER SETS

Size Thickness Ship. Wt. Special(in) (in) (lb) (±) Code No. NET $

GRADE A–INSPECTION12 x 18 3 110 .00005 255-130 98.7724 x 36 4 475 .0001 255-140 325.00

10

Peripheral Surface GrindingSurface grinding with straight or recessed wheels on machines with a rotating or reciprocating table results in a larger contact area than in cylindrical grinding. Thereforeit is necessary to use softer grade wheels, particularly when large diameter and/or widewheels are used.When grinding a large number of components, the grinding is not continuous. In thiscase the components tend to dress the wheel, so a harder grade wheel should be used.

Structure Structure Structure Structure StructureDimensions CSKG 46H SALE $ CSKG 46K SALE $ CSKG 60K SALE $ CSKG 80K SALE $ CSKG 100K SALE $6x1/4x1-1/4 635-040 13.16 635-041 13.16 635-042 13.166x1⁄2x1-1⁄4 635-044 14.98 635-046 14.98 635-052 14.986x5/8x1-1/4 635-112 36.197x1⁄4x1-1⁄4 635-047 17.92 635-048 17.92 635-049 17.927x1⁄2x1-1⁄4 635-055 19.53 635-050 19.53 635-053 19.53 635-056 19.538x1⁄4x1-1⁄4 635-057 21.21 635-061 21.21 635-062 21.218x1⁄2x1-1⁄4 635-064 25.76 635-065 25.76 635-066 25.768x3⁄4x1-1⁄4 635-067 32.20 635-068 32.20 635-091 32.208x3/4x2 635-093 32.20 635-094 32.20 635-096 32.208x1x1-1⁄4 635-069 36.82 635-071 36.82 635-092 36.828x1x2 635-097 36.82 635-098 36.8210x3/4x3 635-101 47.39 635-102 47.3910x1x3 635-072 53.27 635-104 53.2712x3⁄4x3 635-074 72.3112x1x3 635-076 77.28 635-077 77.2812x1x5 635-079 76.7212x1-1⁄2x5 635-082 96.60 635-105 96.6014x1x5 635-109 96.6014x1-1⁄2x5 635-086 123.34 635-087 123.3414x2x5 635-110 159.46 635-111 159.46

RECESSED 2A BOTH SIDES12x2x3 2A 6x3/8 635-106 132.09 635-107 132.0912x2x5 2A 7-1/4x1/2 635-108 123.3414x2x5 2A 8x3⁄8 635-088 166.95 635-089 166.9514x2x5 2A 8x3⁄8 H 635-070 173.18

CERAMIC SURFACE GRINDING WHEELS

HSS PRENTICE DRILLS

DecimalSize Equivalent(in.) (in.) Code No. SALE $ 57⁄64 .8906 107-548 11.6329⁄32 .9062 107-550 11.6359⁄64 .9219 107-552 12.0815⁄16 .9375 107-554 12.4531/32 .9687 107-558 13.1363⁄64 .9844 107-560 13.731 1.0000 107-562 13.58

1-1⁄16 1.0625 107-570 16.801-5⁄64 1.0781 107-572 16.731-3⁄32 1.0937 107-574 16.731-1⁄8 1.1250 107-578 18.151-5⁄32 1.1562 107-582 19.351-3⁄16 1.1875 107-586 23.251-1⁄4 1.2500 107-594 25.05

1-17⁄64 1.2656 107-596 25.051-5⁄16 1.3125 107-602 31.801-3⁄8 1.3750 107-610 37.431-1⁄2 1.5000 107-626 43.88

DecimalSize Equivalent(in.) (in.) Code No. SALE $ 19⁄32 .5937 107-510 5.7039⁄64 .6094 107-512 6.235⁄8 .6250 107-514 6.60

41⁄64 .6406 107-516 7.1321⁄32 .6562 107-518 6.6843⁄64 .6719 107-520 7.1311⁄16 .6875 107-522 7.2045⁄64 .7031 107-524 7.5023⁄32 .7187 107-526 7.6547⁄64 .7344 107-528 8.033⁄4 .7500 107-530 8.63

49⁄64 .7656 107-532 8.2525⁄32 .7812 107-534 8.2551⁄64 .7969 107-536 8.6313⁄16 .8125 107-538 8.7053⁄64 .8281 107-540 10.3527⁄32 .8437 107-542 10.3555⁄64 .8594 107-544 10.357⁄8 .8750 107-546 11.40

• 1/2” shank• 3” cutting length• 6” overall length

Save 30%

Save 25%

11

For Steel, Aluminum and PlasticContains: Noga Grip 1 Handle &

10pcs N1 TiN Coated blades

GOLDEN NOGA SETNG8002 TTiiNN CCooaatteedd

PROMO B NOGA SETNG8000For Steel, Aluminum & PlasticContains: 1 Noga Grip 2 handle &

10pcs N1 (B10) blades

COBALT NOGA SETNG8100For Plastic & Hard MaterialsContains: 1 Noga Grip 2 handle &

20 pcs N10 (B10) Cobalt blades

Model Code No. SALE $NG8100 165-466 34.56



Kit Contents Code No. SALE $

1 pc MCLNR 16-4D 1” shank 149-806 110.1610 pcs CNMG 432 M PT20C

Consists of:1 - MCLNR Toolholder10 - CNMG 432 Inserts

MCLNR TURNING KIT DEBURRING KITS

Kit Contents Code No. SALE $

1 pc MWLNR 16-4D 1” shank 149-825 113.4010 pcs WNMG 432 MM PT20C

Consists of:1 - MWLNR Toolholder10 - WNMG 432 Inserts

MWLNR TURNING KIT

MACHINISTS’ CHESTMODEL 526

CARBIDE DRILL MILLS

MACHINISTS’ CHESTMODEL 52611

8 Drawer – Felt lined drawers and tool compartment.Self storing drop front panel and rugged side handles• 6 drawer dividers

Since 1911

USA MADE CHESTS AND CABINETS

Since 1911

USA MADE CHESTS AND CABINETS

Width Depth Height Weight (in) (in) (in) (lb) Colour Code No. SALE $

26-3/4 8-1/2 13-5/8 36 Brown 609-602 411.91

Width Depth Height Weight (in) (in) (in) (lb) Colour Code No. SALE $

26-3/4 8-1/2 18 47 Brown 609-615 517.82

11 Drawer – Drawers and top compartment feltlined. Front panel covers drawers.• 3 drawer dividers• Side handles

• Drill/Mills can be used for drilling, slotting, profile milling• 2 Flute - 60º & 90º included point angle• Made from submicron grain carbide• Cutting Diameter tolerance: +.000/-.002

Cutting Shank Flute OverallDia. Dia. Length Length 60º 90º(in.) (in.) (in.) (in.) Code No. SALE $ Code No. SALE $1/16 1/8 3/16 1-1/2 153-187 14.25 153-186 13.653/32 1/8 3/8 1-1/2 153-189 14.25 153-188 14.251/8 1/8 1/2 1-1/2 153-191 13.20 153-190 13.203/16 3/16 5/8 2 153-193 18.98 153-192 18.981/4 1/4 3/4 2-1/2 153-195 24.30 153-194 24.305/16 5/16 13/16 2-1/2 153-197 29.25 153-196 30.683/8 3/8 1 2-1/2 153-199 38.25 153-198 38.257/16 7/16 1 2-3/4 153-201 42.38 153-200 50.181/2 1/2 1 3 153-203 63.38 153-202 63.385/8 5/8 1-1/4 3-1/2 153-205 122.10 153-204 122.103/4 3/4 1-1/2 4 153-207 146.48 153-206 140.78

Save 25%

Save 15%

Save 15%

Save 10%

Save 10%

Printed in Canada

*CADIS22*

Pricing valid from April 1 to June 30, 2013 or while quantities last.

Sowa Tool & Machine Co. Ltd.500 Manitou DriveKitchener, OntarioN2G 4B6

Toll Free: 1-800-265-8221Phone: (519) 748-5750Fax: (519) 748-9304Email: [email protected]: www.sowatool.com

Western Canada Branch9649-49th AveEdmonton, ABT6E 5Z5

Each holder comes complete with certificate

ER 11 INCHSize Code No. SALE $3/16 337-651 15.9613/64 337-653 15.967/32 337-655 15.9615/64 337-657 15.961/4 337-659 15.96

17/64 337-661 15.96

ER 16 INCHSize Code No. SALE $1/16 337-531 15.963/32 337-532 15.961/8 337-533 15.965/32 337-534 15.963/16 337-535 15.967/32 337-536 15.961/4 337-537 15.969/32 337-538 15.965/16 337-540 15.9611/32 337-541 15.963/8 337-542 15.96

13/32 337-543 15.96

ER 20 INCHSize Code No. SALE $1/8 337-663 15.965/32 337-665 15.963/16 337-667 15.967/32 337-669 15.961/4 337-671 15.969/32 337-673 15.965/16 337-675 15.9611/32 337-676 15.963/8 337-677 15.96

13/32 337-678 15.967/16 337-679 15.9615/32 337-681 15.961/2 337-682 15.96


13/32 337-693 16.667/16 337-694 16.6615/32 337-696 16.661/2 337-697 16.66

17/32 337-698 16.669/16 337-699 16.6619/32 337-701 16.665/8 337-702 16.66


13/32 337-714 17.507/16 337-716 17.5015/32 337-717 17.501/2 337-718 17.50

17/32 337-719 17.509/16 337-721 17.5019/32 337-722 17.505/8 337-723 17.50

21/32 337-724 17.5011/16 337-725 17.5023/32 337-726 17.503/4 337-727 17.50


13/32 337-739 22.197/16 337-741 22.1915/32 337-742 22.191/2 337-743 22.19

17/32 337-744 22.199/16 337-746 22.1919/32 337-747 22.195/8 337-748 22.19

21/32 337-749 22.1911/16 337-751 22.1923/32 337-752 22.193/4 337-753 22.19

25/32 337-754 22.1913/16 337-756 22.1927/32 337-757 22.197/8 337-758 22.19

29/32 337-759 22.1915/16 337-761 22.1931/32 337-762 22.191 337-763 22.19

CT 40 CT 50Collet Series Collet Range Gauge Length Code No. SALE $ Code No. SALE $

ER11 .019-.275” 2.50” 531-400 97.79 - -ER11 .019-.275” 4.00” 531-402 97.72 - -ER11 .019-.275” 6.00” 531-404 105.42 - -ER16 .019-.406” 2.50” 531-406 97.72 - -ER16 .019-.406” 3.50” 531-408 97.72 - -ER16 .019-.406” 4.00” 531-405 101.71 531-432 145.46ER16 .019-.406” 6.00” 531-410 105.42 531-434 157.64ER16 .019-.406” 8.00” - - 531-436 181.02ER20 .039-.511” 2.50” 531-412 98.49 531-438 146.23ER20 .039-.511” 4.00” 531-414 98.49 531-440 146.23ER20 .039-.511” 6.00” 531-416 108.15 531-442 161.42ER20 .039-.511” 8.00” - - 531-444 181.86ER25 .039-.629” 2.50” 531-418 102.20 531-446 149.87ER25 .039-.629” 4.00” 531-420 102.20 531-448 149.87ER25 .039-.629” 6.00” 531-422 112.28 531-450 161.56ER25 .039-.629” 8.00” - - 531-452 185.36ER32 .078-.787” 2.50” 531-421 104.16 - -ER32 .078-.787” 3.13” 531-424 104.16 - -ER32 .078-.787” 4.00” 531-423 108.01 531-454 151.90ER32 .078-.787” 5.00” 531-426 111.86 - -ER32 .078-.787” 6.00” 531-425 115.64 531-456 156.45ER32 .078-.787” 8.00” - - 531-458 188.23ER40 .118-1.023” 2.50” 531-427 109.20 - -ER40 .118-1.023” 3.13” 531-428 109.20 - -ER40 .118-1.023” 4.00” 531-429 113.05 531-460 157.01ER40 .118-1.023” 5.00” 531-430 116.83 - -ER40 .118-1.023” 6.00” 531-431 120.75 531-462 169.12ER40 .118-1.023” 8.00” - - 531-464 193.97

FEATURES:• DIN Coolant option - standard• All Ground Body• 100% Forged Construction• Factory Balanced to save spindle life, tool life and increased

productivity• Threaded through holes for a back-up screw (tool stop) or

coolant through when removed• Wrench not included

PREMIUM BALANCED

EERR CCOOLLLLEETT CCHHUUCCKKSSUP TO 20,000 RPM

UP TO 30,000 RPMCAT 40

CAT 50

Save 30%

Build Your Own Package with these convenientchecklist style forms.Downloadable at www.sowatool.com

Contact your Sowa Dealer about package pricing.

Largest Rotary Toolinginventory in Canada.

Documents

pdf.pngSpring 2013 Sowa Metalworking Solutions Flyer