Embed Size (px)
Citation preview
Maximum IP Backhaul Capacity & Agility!
Native Ethernet MW Backhaul
Everything Goes All-IP... So Do MW Transport Networks
The capacity crunch effected from the ever-increasing demand for broadband services poses significant challenges on access and backhaul technologies.
Mobile LTE/LTE-A networks rapidly evolve to flat all-IP architectures, while operators adopt new radio access design paradigms by also deploying small cells and HetNets, all relying on end-to-end Ethernet connectivity.
Along with backhaul network transformation, Carrier Ethernet and IP/ MPLS services are rapidly being provisioned as the preferred transport technologies. Convergence around all-IP is already happening, while the SDN evolution is under way.
Packet Microwave (MW) is the technology of choice for backhaul applications, having the lowest cost-per-bit and the fastest deployment cycle among other transmission alternatives. Packet MW transport solutions addressing the requirements of next-generation IP networks, by offering excessive capacity with market-leading 4096-QAM modulations and by providing a converged backhaul aggregation base for small-cell expansions, is the smartest investment for the future.
[Fig. 1] The OmniBAS™ highly-valued solution: All services over one transport technology
Converging to All-IP with OmniBASTM
OmniBAS™ is a next generation packet MW portfolio for operators demanding a cost-effective and technologically-advanced solution for their backhaul network.
OmniBAS™ ideally: ● implements the MW access & aggregation segments of 3G+ / LTE / LTE-A / heterogeneous networks,
● extends the reach of fixed broadband to rural areas, and ● rapidly deploys IP communication and control links for utility companies and governmental agencies.
It allows highly-flexible IP link configurations, from all-outdoor and split-mount at tail sites, to high nodal implementations at central sites, all from the same platform.
Facilitating an evolved approach toward smooth all-IP migration, OmniBAS™ enables operators to deliver high-speed IP services utilizing the market-leading modulations of 4096-QAM.
Traditional circuit-based services are seamlessly emulated with Pseudo-Wire (PW) technology and are delivered with assured high quality.
Incorporating highly-efficient packet traffic handling mechanisms and radio bandwidth utilization techniques, OmniBAS™ assures carrier-class service delivery with highest availability. The uniform handling of all types of traffic flows over IP allows the finest of QoS granularity, achieves optimum usage of radio capacity and enables a true convergence to all-IP.
Revolutionize Your Network!
Enable business
● Remove backhaul bottleneck ● Facilitate the delivery of new compelling services
● Increase customer base & ARPU ● Keep control of your network with end-to-end OAM
Invest wisely
● Build future-proof backhaul networks with 2 Gbit/s per link
● Seamlessly support legacy services and leverage SDH infrastructure
● Optimize Total Cost of Ownership (TCO) with add-on features
Expand capabilities
● Inject flexibility in last-mile access applications
● Implement nodal configurations for aggregating traffic from macro and small cells
● Prepare for SDN / NFV evolution
One TransportTechnology
One TransportTechnologyAll ServicesAll Services One SolutionOne Solution
From
1 u
p to
8Fr
om 1
up
to 8
radi
os p
er s
yste
mra
dios
per
sys
tem
small-cell aggregationsmall-cell aggregationConverged macro &Converged macro &
Split-mount &
Split-mount &
all-outdoor options
2 Gbit/s per link2 Gbit/s per link
Ethernet
IP / MPLS
Legacy Traffic PWEs
Ethernet
IP / MPLS
Legacy Traffic PWEs
Carrier Ethernet
IP Convergence & SDN evolution
Radio Efficiency
Carrier Ethernet
IP Convergence & SDN evolution
Radio Efficiency
Solution DescriptionOmniBAS™ is a native Ethernet wireless transport platform employing state-of-the-art MW packet technology. It achieves excessive throughput – up to 2 Gbit/s on a single link – for LTE and other data-demanding backhaul applications.
OmniBAS™ incorporates sophisticated Radio Resource Control (RRC), for best optimization of the available radio capacity, as well as hitless adaptive modulation (4-QAM up to 4096-QAM), which increases throughput and service availability in all weather conditions. Capacity is boosted by combining cutting-edge Link Aggregation (RLA), or XPIC techniques, with advanced packet optimization like dense IP headers compression.
The table below gives the OmniBAS™ maximum line rates for various channel sizes and link configurations:
Maximum Line Rate (Gbit/s)
Modulation
Channel
56 MHz(1+0)
56 MHz (XPIC)2 x 56 MHz (2+0)112 MHz (1+0)(1)
4096-QAM 0.91 1.80
2048-QAM 0.83 1.65
1024-QAM 0.75 1.50
Besides capacity maximization, RLA in particular allows for easier network management, as many links can be combined in a single radio link, while it offers increased availability by automatically balancing load over all available air links.
Network configurations are flexible, ranging from all-outdoor single links to nodal implementations for traffic aggregation sites, while utilizing E1, STM-1 and Gigabit Ethernet interfaces.
The OmniBAS™ platform, which is offered in split-mount and all-outdoor configurations, comprises:
● OmniBAS™-2Wc, the new addition to the family, is a compact 1 RU indoor unit (IDU) available in two versions, with one or two embedded modems. It employs a fanless chassis design providing hardened characteristics in extreme environments.
● OmniBAS™-2W and OmniBAS™-4W, which are compact (1 RU) IDUs with modular architecture(2) – the higher nodal 2 RU solution (OmniBAS™-8W)(3). The available radio configurations include: 1+0 ... 8+0, 1+1 / 2+2 / 3+3 / 4+4, XPIC(4) 2+0 ... 4+4 / 8+0, depending on IDU model.
● Complete family of outdoor units (ODUs) covering a wide range of operating frequencies (6 / 7 / 8 / 11 / 13 / 15 / 18 / 23 / 26 / 28 / 32 / 38 GHz). Support for modulations up to 4096-QAM.
● OmniBAS™ all-outdoor radio, which is based on the OSDR platform, supporting up to 4096-QAM modulations and 1+0, 1+1 and 2+0 configurations.
● OmniBAS™-4P half-rack 1 RU IDU supporting up to four OSDR radios through PonE-enabled Gigabit Ethernet interfaces.
● Antennas, either integrated or standalone.
OmniBAS™ provides redundancy for ODU / modem / controller / Gigabit Ethernet, also allowing the implementation of RSTP and the more advanced controls of Ethernet protected rings, as per ITU-T G.8032, of carrier-grade sub-50 ms recovery switching time. The efficient timing capabilities include traditional G.703-based synchronization and Ethernet synchronization based on Synchronous Ethernet and IEEE 1588v2 standards. End-to-end Ethernet service management is ensured through standards-based OAM functions and a powerful NMS system.
(1) In roadmap.(2) For 2 or 4 radios.
(3) For 8 radios.(4) Available for OmniBAS™-4W/-8W, OmniBAS™-2Wc in roadmap.
ODU
OmniBAS™-4P
OmniBAS™-2Wc
Radios Modular IDUsCompact IDUs
OSDR (all-outdoor)
OmniBAS™-4W
OmniBAS™-2W
OmniBAS™-8W
[Fig. 2] Typical backhaul architecture with OmniBAS™ family of products
● Native Ethernet-based PtP radio sys-tems.
● Massive full-duplex throughputs - up to 2 Gbit/s with IP packet optimization tech-niques - over a single channel (with XPIC).
● Market-leading hitless adaptive modula-tion from 4-QAM to 4096-QAM.
● Robust RF performance, Tx power boost with Pre-Distortion for increased link range and availability.
● Nodal solution up to eight radios from a single chassis.
● Protected XPIC (2+2) even on a 1 RU chassis.
● Radio Link Aggregation up to 4 radios.
● Ethernet ring protection (ITU-T G.8032).
● Comprehensive set of L2 (Ethernet) and QoS features.
● Ethernet OAM suite.
● Carrier Ethernet compliant services.
● Seamless transport of legacy services with Pseudo-Wires.
Hig
hlig
htsIncreasing Backhaul Agility
The OmniBAS™ family of products constitutes a single IP technology investment for current and future needs, providing superior deployment flexibility – from all-outdoor units to higher nodal compact solutions – for the most demanding backhaul network applications.
OmniBAS™ OSDR is intended for zero-footprint last-mile IP backhaul of 3G+/4G and small-cell deployments.
OmniBAS™-2Wc/-2W are the cost-optimized IDUs for tail links requiring up to two radios, whereas OmniBAS™-4W is more appropriate for nodal sites of up to four radios. The OmniBAS™-8W further enhances deployment agility by supporting eight radios in a 2 RU IDU and by providing full hardware redundancy.
OmniBAS™-4W/-8W constitute the ideal solution for excessive throughput requirements, as they both support protected (2+2) XPIC nodes.
OmniBAS™-8W perfectly fits sites with high-aggregation needs as it offers 6+6 Gigabit Ethernet / (1+1) 10 Gigabit Ethernet(1), up to 64 x E1 and four STM-1 VC-12 interfaces. OmniBAS™-8W can be flexibly positioned at the aggregation network and/or close to the control site (RNC / BSC), where it restores the PWEs back to their initial TDM form.
The OmniBAS™ all-outdoor and split-mount nodes are fully compatible and can be used according to operator site requirements.
Figure 2 illustrates the wide range of deployment scenarios enabled by the OmniBAS™ comprehensive portfolio, making clear its agility advantages in an all-IP backhaul network.
OmniBAS-2Wc/-2W
2G/3
G/LTE
OmniBAS-4W
2G/3
G/LTE
4G
Large Hub
Medium Hub
BSC/RNC/ASN-GW/MME/S-GW
OmniBAS-4W
STM-1
GbE
XPIC 2+2
OmniBAS-8W
MEN
SDH
Low RAN High RAN
End-to-end Network Management (uni|MS)
ODU
ODUODU
ODUODU
OmniBASOSDR
(1) In roadmap.
Backhaul Convergence with OmniBASTM CBANConverged Backhaul Aggregation Node
The OmniBAS™ product family enables operators to establish a solid foundation in their macro-cell backhaul network, enrich it, in order to unify the aggregation layer for HetNets and finally accelerate small-cell deployment.
The OmniBAS™-8W/-4W indoor units, besides the modems for connecting ODUs (in split-mount node configurations), can be equipped with Power on Ethernet modems to support a wide variety of all-outdoor MW and mmWave radios.
Such a Converged Backhaul Aggregation Node (CBAN) application (see Figure 3 below) is a state-of-the-art solution that flexibly leverages best-of-breed MW and mmWave technologies in order to effectively address today’s backhaul challenges.
In addition, OmniBAS™-4P provides four Gigabit Ethernet interfaces, PonE enabled, for connection to any outdoor radio of the current Intracom Telecom portfolio
Technologies & Applications
OmniBAS™ CBAN supports any ODUs / OSDRs (all-outdoor radios) / UltraLink™-FX80 / StreetNode™ V60-PTP mix, up to eight connected systems in total.
OmniBAS™ CBAN Benefits
● Unified macro and small-cell backhaul
● High scalability
● Optimized backhaul performance end-to-end
● Unified management suite (uni|MS™) for network and services
● Simplified network planning, operation and maintenance
● Enabler for network sharing & managed backhaul models
[Fig. 3] Connection capabilities of a CBAN node
OSDR
OSDR
ODU
UltraLink-FX80
StreetNode V60-PTP
StreetNode
OmniBAS CBAN
PtP(MW)
PtP(E-Band)
PtP(V-Band)
PtP(MW)
Ethernet
SDH
End-to-end Network Management (uni|MS)
PoE
PoE
PoE
PoE
PoEIF
PtMP(MW)
PtP/PtMP(MW)
CBAN Connected With Topology Application
OmniBAS™ ODUs PtP links (split-mount) Macro and/or small-cell backhaul over the licensed MW spectrum.OSDR (Outdoor Software-
Defined Radio) platformPtP links (all-outdoor)
PtMP aggregation hubs (FO-HUBs) Small-cell backhaul using StreetNode™ PtMP terminals over licensed, area-wide bands (26 / 28 / 32 / 42 GHz).
StreetNode™ PtP / PtMP (all-outdoor) Small-cell backhaul, microwave.
UltraLink™-FX80 PtP links (all-outdoor) Small-cell backhaul over E-Band.
StreetNode™ V60-PTP PtP links (all-outdoor) Small-cell backhaul over V-Band.
01-2
016
Why Intracom Telecom
Service Excellence
Cont
inuo
us In
nova
tion
One-stop Shop
Established Wireless
Vendor
Your clear choice!
One-stop Shop ● Comprehensive portfolio of end-to-end radio access & backhaul solutions ● Proven integration & interoperability ● State-of-the-art end-to-end management suite
Established Wireless Vendor ● Growing and continuous presence for a variety of access and transmission solutions ● Growing brand name recognition for PtP and PtMP solutions
Recognized for Service Excellence ● Extensive implementation track record ● Specialized & highly experienced personnel ● Consulting, design, implementation & support ● Commitment to adding customer value
Continuous Innovation ● Innovating in the wireless access and transmission field for over one and a half decade ● Successful development and deployment of PtP and PtMP systems with numerous operators in Europe, the Middle East, the CIS, Asia and Africa ● Investing heavily on the continuous evolution of its wireless product lines ● Adopting latest standards and most advanced technologies to deliver wireless solutions that best fit customer current and future needs
About Intracom Telecom
Intracom Telecom is a global telecommunication systems and solutions vendor operating for over 35 years in the market. The company innovates in the areas of small-cell backhaul, wireless transmission and broadband wireless access and has successfully deployed its industry leading point-to-point and point-to-multipoint packet radio systems worldwide. Moreover, Intracom Telecom offers a competitive portfolio of revenue-generating telco software solutions and a complete range of ICT services, focusing on big data analytics, converged networking and cloud computing for operators and private, public and government clouds. The company invests significantly in R&D developing cutting-edge products and integrated solutions that ensure customer satisfaction. Over 100 customers in more than 70 countries choose Intracom Telecom for its state-of-the-art technology. The company employs more than 1,900 people and operates subsidiaries in Europe, Russia and the CIS, the Middle East and Africa, Asia and North America.
All information contained in this document is subject to change without prior notice. Intracom Telecom, the Intracom Telecom logo, OmniBAS, the OmniBAS logo, StreetNode, UltraLink and uni|MS are trademarks or registered trademarks of Intracom S.A. Telecom Solutions. All other trademarks are property of their respective owners.© 2016 Intracom S.A. Telecom Solutions
Intracom Telecom Regional Contacts
www.intracom-telecom.com
Europe19.7 km. Markopoulou Ave.19002 Peania, Athens Greecet: +30 2106671000 f: +30 2106671001 [email protected]
Russia & CIS16 Krasnoproletarskaya Str. Bldg. 1, Entr. 3, Moscow, 127473Russiat: +7 495 9214881 f: +7 495 7253805 [email protected]
Middle East & APACBuilding No. 3, Office No. 204P.O. Box 500517, Dubai Internet City, Dubai United Arab Emiratest: +971 4 3625666 f: +971 4 3904279 [email protected]
IndiaUnit #742-743, 7th FloorJMD Megapolis, Sector 48, Sohna RoadGurgaon 122001, HaryanaIndiat: +91 124 4180380f: +91 124 [email protected]
America3885 Crestwood ParkwaySuite 100, Duluth, GA 30096USAt: +1 770 2952500 f: +1 770 2952600 [email protected]
AfricaUnit 18 Mezzanine, Oxford Office Park3 Bauhinia Street, Highveld TechnoparkCenturion, GautengSouth Africat: +27 12 8800260 f: +27 12 [email protected]
