- SHORT • ACCOUNTS FOR TOLERANCE STACK UP …nappco.com/assets/images/Sherex RIV_FLOAT_SHORT.pdf• accounts for tolerance stack up injointdesignand misalignmentduringservice ofthe

29Sherex Fastening Solutions • Phone: 866-474-3739 • Fax: 716-875-0358 • www.sherex.com • E-mail: [email protected]

RIV-FLOAT® -SHORT

Sherex Fastening Solutions • Phone: 866-474-3739 • Fax: 716-875-0358 • www.sherex.com • E-mail: [email protected]

• The RIV-FLOAT® series provides easy, accurate, and fast attachment of components in off-center applications.

Sherex Fastening Solutions • 400 Riverwalk Pkwy, Suite 600 • Tonawanda, NY 14150 • Phone: 866-474-3739 • www.sherex.com

RIV-FLOAT - SHORT

Standard Rivet Nut Installed Cross Section of a StandardRivet Nut Installed

®

Floating internal threads allow for component attachments in off center applications

The NEW Low-Profile addition to the RIV-FLOAT® family

RIV-FLOAT® - SHORT is installed with Flex-5 Hydro-Pneumatic toolwith RIV-FLOAT® - SHORT Anvil

RIV-FLOAT® - SHORT Installed CROSS SECTION OF RIV-FLOAT® - SHORT Installed

CENTERINGNOSEPIECE

Sherex rivet nuts are compatible with the following hardware:GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8

Please contact Sherex when using other grade fasteners.

features and benefits

• Accounts for tolerance stack up in joint design and misalignment during service of the joint.• New Low-Profile design provides greater backside clearance.• Allows for installation post finish in applications where riveted nut plates or cage nuts are typically used.• Mechanically locked RIV-FLOAT®-Short available with prevailing torque feature to IFI SPEC 100/107.• .020” Radial Float.• RoHS Compliant.

RIV-FLOAT® Short is covered under U.S. Patent No. 9,309,914


RIV-FLOAT - SHORT

Standard Rivet Nut Installed Cross Section of a StandardRivet Nut Installed

®

Floating internal threads allow for component attachments in off center applications

The NEW Low-Profile addition to the RIV-FLOAT® family

RIV-FLOAT® - SHORT is installed with Flex-5 Hydro-Pneumatic toolwith RIV-FLOAT® - SHORT Anvil

RIV-FLOAT® - SHORT Installed CROSS SECTION OF RIV-FLOAT® - SHORT Installed

CENTERINGNOSEPIECE

Sherex rivet nuts are compatible with the following hardware:GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8

Please contact Sherex when using other grade fasteners.


Ensure easy, accurate, and fast attachmentof components in off center applications.

L HD HT D IL Hole Size

Min. Max. ± .01 ± .012 ± .003 Max. Ref. +.006/ -.000

RFSK2-0832-100 8-32 UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433RFSK2-1024-100 10-24 UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433RFSK2-1032-100 10-32 UNF 0.020 .020 .100 .394 .480 .025 .431 .246 .433


Min. Max. ± .25 ± .30 ± .07 Max. Ref. +.15/ -.00

RFSK2-470-2.5 M4x0.7 ISO 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00RFSK2-580-2.5 M5X0.8 ISO 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00


Min. Max. ± .01 ± .015 ± .003 Max. Ref. +.006/ -.000

RFSL2-0832-100 8-32 UNC 0.020 .020 .100 .406 .555 .033 .431 .246 .433RFSL2-1024-100 10-24 UNC 0.020 .020 .100 .406 .555 .033 .431 .246 .433RFSL2-1032-100 10-32 UNF 0.020 .020 .100 .406 .555 .033 .431 .246 .433


Min. Max. ± .30 ± .38 ± .08 Max. Ref. +.15/ -.00

RFSL2-470-2.5 M4x0.7 ISO 0.50 0.50 2.50 10.30 14.10 .85 10.95 6.25 11.00RFSL2-580-2.5 M5x0.8 ISO 0.50 0.50 2.50 10.30 14.10 .85 10.95 6.25 11.00

RadialFloat

Grip Range

SHEREXPart NumberMetric - Steel

Thread SizeRadialFloat

Grip Range

Part NumberMetric - Steel


Grip Range

RFSL SERIES - LARGE FLANGE

RFSK SERIES - SMALL FLANGE

Part NumberInch - Steel


Grip Range


Thread Size

Prints andTechnical Dataare available atwww.sherex.com

Patent Pending

• ACCOUNTS FOR TOLERANCE STACK UP IN JOINT DESIGNANDMISALIGNMENT DURINGSERVICE OF THE JOINT

• NEWLOW-PROFILE DESIGNPROVIDES GREATER BACKSIDE CLEARANCE

• ALLOWS INSTALLATIONPOST FINISH INAPPLICATIONS WHERE WELDNUTSOR CAGE NUTS ARE TYPCIALLY USED

• MECHANICALLY LOCKEDRIV-FLOAT® - SHORT AVAILABLE WITHPREVAILINGTORQUE FEATURE TO IFI SPEC 100/107

• 0.020” RADIAL FLOAT

• ROHS COMPLIANT

Features and Benefits of RIV-FLOAT® - SHORT

Uninstalled Installed

GRIP RANGE

SHEREX AEROSPACEPART NUMBERS

RFSK2-0832-100MLZN

RFSK2-1032-100MLZN

rfsk inch thread small flange series (unit - inches)




Min. Max. ± .01 ± .012 ± .003 Max. Ref. +.006/ -.000



Min. Max. ± .25 ± .30 ± .07 Max. Ref. +.15/ -.00



Min. Max. ± .01 ± .015 ± .003 Max. Ref. +.006/ -.000



Min. Max. ± .30 ± .38 ± .08 Max. Ref. +.15/ -.00


RadialFloat

Grip Range



Grip Range



Grip Range





Grip Range


Thread Size


Patent Pending






• ROHS COMPLIANT



GRIP RANGE


RFSK2-0832-100MLZN

RFSK2-1032-100MLZN

rfsk metric thread small flange series (unit - millimeters)




Min. Max. ± .01 ± .012 ± .003 Max. Ref. +.006/ -.000



Min. Max. ± .25 ± .30 ± .07 Max. Ref. +.15/ -.00



Min. Max. ± .01 ± .015 ± .003 Max. Ref. +.006/ -.000



Min. Max. ± .30 ± .38 ± .08 Max. Ref. +.15/ -.00


RadialFloat

Grip Range



Grip Range



Grip Range





Grip Range


Thread Size


Patent Pending






• ROHS COMPLIANT



GRIP RANGE


RFSK2-0832-100MLZN

RFSK2-1032-100MLZN

rfsl inch thread large flange series (unit - inches)




Min. Max. ± .01 ± .012 ± .003 Max. Ref. +.006/ -.000



Min. Max. ± .25 ± .30 ± .07 Max. Ref. +.15/ -.00



Min. Max. ± .01 ± .015 ± .003 Max. Ref. +.006/ -.000



Min. Max. ± .30 ± .38 ± .08 Max. Ref. +.15/ -.00


RadialFloat

Grip Range



Grip Range



Grip Range





Grip Range


Thread Size


Patent Pending






• ROHS COMPLIANT



GRIP RANGE


RFSK2-0832-100MLZN

RFSK2-1032-100MLZN

rfsl metric thread large flange series (unit - millimeters)

CROSS SECTION OF RIV-FLOAT®-SHORT Installed

30Sherex Fastening Solutions • Phone: 866-474-3739 • Fax: 716-875-0358 • www.sherex.com • E-mail: [email protected]

RIV-FLOAT® -SHORT

riveted nut plate

• Requires three holes to be drilled (1 for the plate & 2 for the rivets).• Requires access to both sides of the work piece.• 15-20 second installation time.

cage nut

• Requires a square hole to be punched.• Requires access to both sides of the work piece.• 15-20 second installation time.

riv-float®-short

• Only 1 round hole needs to be drilled.• Access from only one side of the work is necessary for installation.• 2-3 second installation time.

single kits – riv-float®-short

• RNHT-0832RFS BAG 1 Installation Tool, 1 Mandrel, 15 RIV-FLOAT®-SHORT rivet nuts• RNHT-1032RFS BAG 1 Installation Tool, 1 Mandrel, 15 RIV-FLOAT®-SHORT rivet nuts• RNHT-M4RFS BAG 1 Installation Tool, 1 Mandrel, 15 RIV-FLOAT®-SHORT rivet nuts• RNHT-M5RFS BAG 1 Installation Tool, 1 Mandrel, 15 RIV-FLOAT®-SHORT rivet nuts

multi kits – riv-float®-short

• RNHT RFS Inch Kit 1 Installation Tool for 8-32, 1 Mandrel, 1 Installation Tool for 10-32, 1 Mandrel, 1 Installation Tool for 1/4-20, 1 Mandrel, (30) 6-32, (30) 8-32, (30) 10-32 and (20) 1/4-20 Rivfloat Shorts

• RNHT RF Metric Kit 1 Installation Tool for M4, 1 Mandrel, 1 Installation Tool for M5, 1 Mandrel, 1 Installation Tool for M6, 1 Mandrel, (40) M4, (30) M5 and (20) M6 Rivfloat Shorts

FLOATING TECHNOLOGIESRIV-FLOAT®-SHORT vs. Riveted Nut Plates vs. Cage Nuts

! "#$#%&' ( )*#+,+- &! . /0*,. +)&1&233&4,5#$6 ( /7&876 9:&! 0,*#&; 33&&<. +( 6 ( +=( :&> ?:&@2@A3&1&B; ; C2! DE4EF&1&6 6 6 G)" #$#%GH. I

Riveted Nut Plate - Requires three holes to be drilled (1 for the plate & 2 for the rivets)

- Requires access to both sides of the work piece - 15-20 second installation time

RIV-FLOAT®-SHORT - Only 1 round hole needs to be drilled

- Access from only one side of the work is necessary for installation - 2-3 second installation time

Floating Technologies RIV-FLOAT®-SHORT vs. Riveted Nut Plates

RIV-FLOAT®-SHORT is installed with a FLEX-5 Hydro-Pneumatic Tool with a RIV-FLOAT®-SHORT Anvil

Patent Pending

Cage Nut - Requires a Square Hole to be punched

- Requires access to both sides of the work piece - 15-20 second installation time

Riveted Nut Plate Cage Nut

RIV-FLOAT®-SHORT

RIV-FLOAT® Short is covered under U.S. Patent No. 9,309,914.

RIV-FLOAT®-SHORT Rivet Nuts are designed to be installed with theFLEX-5 Hydro-Pneumatic Tool with a RIV-FLOAT®-SHORT Anvil.

CENTERINGNOSEPIECE

Documents

- SHORT • ACCOUNTS FOR TOLERANCE STACK UP …nappco.com/assets/images/Sherex RIV_FLOAT_SHORT.pdf• accounts for tolerance stack up injointdesignand misalignmentduringservice ofthe