Upload
truongdang
View
216
Download
0
Embed Size (px)
Citation preview
PCM
rese
rves
the
righ
tto
chan
geth
isda
taat
allt
imes
.Thi
sdo
cum
entw
aspr
inte
dw
ithto
xic-
free
ink
PCM Industry Built for Life
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 2
Built for Life
Your industrial partnerFor the past 75 years, PCM has been providing advanced pumptechnologies to the industry sector. Our unmatched expertisecan be traced back to our origins: the company was founded bythe inventor of the progressing cavity pump.
Unique expertiseToday, we are one of the world’s leadingmanufacturers of positive displacement pumps and fluid-handling equipment. As a leader we offer a complete range of solutions that othermanufacturers cannot match.
Vertical integrationPut our expertise to work for you. When you want asingle source for the best in positive displacementpump technologies as well as complete mastery ofevery level of the fluid handling solution—fromcomponents to pumps, systems to services—PCMis the partner. No other company brings togethersuch a wide and deep knowledge under one roof.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 3
3
Proactive innovation
Inventor of the PCPRené Moineau, the founder of PCM, invented the world’s firstProgressing Cavity Pump (PCP) in 1930. It was the start of theinnovation and technical excellence that made PCM famous.
The elastomer expertsThe ability of an elastomer to withstand the pumping action and thefluids being handled has a direct impact on the efficiency and reliabilityof a pumping system. While many other pump manufacturers usethird-party elastomers, we mix and produce our own to ensure thehighest quality and maximum compatibility. And thanks to over 75 years of experience in elastomers, we have a unique database of formulas and compatibilities.
Fluid knowledgeThe design of our pumps starts in the Flow Technology Center. Insteadof inventing pumps and trying to adapt them to your needs, our FlowTechnology Center focuses on fluids to identify the best pump design.
Focus on life cycle efficiencyPumps lie at the heart of an incredibly wide range of industrialapplications. The better adapted a pump, the more efficiently itoperates. Poorly adapted pumps may cause production losses,maintenance downtime and unnecessary energy consumption.We use Life Cycle Cost (LCC) analysis to identify the most cost-effectivepumping solution, and LCC is not reserved for new pump acquisitions.Studies estimate that changing equipment and/or control systems canincrease energy savings by 30 to 50 per cent.
Eco-designTo reduce the Life Cycle Costs and environmental impact of our pumps,we embraced Eco-Design more than half a decade ago. PCM Eco-Design lessens the environmental impact of our pumpingsolutions, by taking a Life Cycle Cost (LCC) approach to design,optimizing it at every stage, from suppliers and manufacturing throughto decommissioning. In doing so, we enable you to meet youroperational and environmental requirements at the same time.
René Moineau
Pump purchase price
Globalmaintenance cost
Productionlosses
Energy cost
Others
Ecolobe™: the first eco-design lobe pump
Elastomer press
Flow Technology Center
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 4
Built for Life
Technologies for everychallengeWe offer one of the widest ranges of positive displacementpumps in the industry. When combined with our Life Cycle Cost(LCC) approach to pump design, this enables us to provide youwith the right pump technology for your fluids and operatingenvironment.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 5
Preci-Pompe
Lobe (rubber-coated)
Delasco
Moineau
Pump technologies
Progressing cavity pumps: Unbeatable competitiveness
Ideal for fragile, abrasive and viscous fluids, PCMEcoMoineau™ progressing cavity pumps offer low Life CycleCosts, thanks to their low energy consumption, inherentreliability and high suction capabilities.
Peristaltic pumps: Easiest maintenance
The gentle pumping action of PCM peristaltic or hosepumps is adapted to shear sensitive fluids. Their simplicityand robustness also make them ideal for medium flow,medium pressure pumping of abrasive, fragile and corrosive
fluids. They are low cost and easy to maintain, because only the hose isin contact with the fluid.
Lobe pumps: smallest footprintIdeal for handling viscous and abrasive fluids, including highsolids content, PCM Ecolobe rubber-coated lobe pumpsfeature a design that eliminates the maintenance problemsthat commonly affect other industrial lobe pumps.
Maintenance can be performed in place without dismantling the piping.
Dosing pumps: High metering accuracy
When your applications require a high level of accuracy,reliability and economical efficiency, PCM dosing pumps arethe answer. Featuring rugged, simple design they offermaximum compatibility with most chemical reagents.
5
Preci-Pompe™ range
Delasco™ range
Lobe range
Moineau™ range
Product range Technology
Floating stator
Fixed stator
Soft hose
Reinforced hose
Q max m3/h
15
250
20
65
P max bar
10
48
3
15
Visco max cP
5,000
1,000,000
15,000
50,000
T max °C
90
120
120
110
Tri lobe 750 10 500,000 90
Diaphragm 0.35 12 1,500 90
Plunger 2 350 5,000 150
Higher values available upon request. Please contact us for more information.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 6
Built for Life
Best of our worldsEach PCM skid combines our technological andprocess expertise in a ready-to-use system. Theyprovide the best pump technology according to theproduct and application.
Complete processBecause our skids integrate all the equipment andaccessories needed, they provide a full industrialprocess. This cuts down on integration time andenables you to integrate advanced processes intoyour operations.
Turnkey solutionsthat simplify processengineeringOur turnkey pump skid systems simplify and accelerate theintegration of PCM pumping solutions into your industrialprocesses. Each skid includes the pump, accessories andcontrol panels. We also develop and deliver customized skidsystems for any application.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 7
Turnkey solutions
Ready to goThe quality of factory-built PCM skids is generally higher than siteassembled systems, because our factory is properly equipped andorganized for this purpose. Moreover, PCM skids are fully tested aheadof installation to ensure rapid integration into your operations. You nolonger have to spend time or money developing a system around thepumps. Nor do you have to worry about finding the right controlsystems and other accessories.
EconomicalPCM skids are an economical alternative to time-consuming on-sitesystem installation, because they eliminate the need to managemultiple suppliers and there are no hidden engineering costs. You canorder whole systems at one time, which simplifies purchasing. Bydeploying standardized skid systems across your operations, you canreduce maintenance and spare parts costs.
Transfer SystemsCake Pump Process IntegrationComplete Gavo force-feed system with integrated polymer lubricationsludge level control and lime addition.
Solid/Liquid Separation SystemsFilter Press Feed SystemComplete dewatering system that separates solids from liquids.
Dosing SystemsLime Milk Dosing SystemsComplete systems for lime milk preparation, mixing and dosing.
Chemical Dosing SystemComplete systems for chemical injection in industrial processes.
Customized systemsWe can develop customized systems to meet your exact requirements.They come with pumps, accessories and the control panel in a custom-made, fully tested skid.
7
Lime treatment using Gavo™ in a sewagetreatment plant
Stand-alone pumping station
An industrial application featuringEcoMoineau with a bypass
ChemSkid™ for ferric chloride injection
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 8
Built for Life
Testing: Making the right choiceTo ensure the performance and lifespan of a pumpor pump system, it is vital that it is engineered tomeet the needs of the materials being handled.That is why we provide viscosity, elastomer andabrasion testing.
Installation: Ensuring trouble-freeoperationOur installation services take the guesswork out ofintegrating a new pump into an existing system orinstalling a new pump from scratch. We providestart-up assistance, system integrationengineering, and training for operators.
At your serviceTo increase the added value of our pumps and pump systems,we provide a wide range of pre- and post-sales services for ourindustrial customers.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 9
Services
9
Servicing: Guaranteeing efficiencyTo make sure your pump investment meets your performanceexpectations and operates at maximum efficiency, we provide extendedwarranties, field maintenance for PCM and non-PCM pumps, repairservices and wear analysis.
Optimization: Delivering lowest operating costTo make sure the pumps you own and the ones you are going to buyoperate efficiently during their entire lifespan, we provide systemoptimization services such as Life Cycle Cost (LCC) audits, seal andmotor upgrades, and ATEX conformity.
Life Cycle Services: Extending lifespanOur life cycle services can breathe new life into your PCM pumps. Rotorand mechanical seal refurbishment adds years onto a pump’s lifespan.And when a pump does need decommissioning, we can recycle it foryou, in accordance with today's strictest environmental regulations.
Spare parts: Rapid worldwide distributionThanks to our worldwide network of sales offices and distributors, youcan obtain genuine PCM spare parts quickly. Using PCM spare partsensures that PCM products last as long as possible, benefit fromwarranty protection and maintain their CE conformity until their end oflife.
Global presenceWith production facilities in Europe, Asia and America, and sales officesand logistics centers around the world, we are always close to youroperations. We also have an extensive network of over 60 distributors in60 countries.
Revamping of a Moineau pump GBBseries with installation of the new bridge-breaker device
Start up assistance
Over 5,000 references in stock
On-site training for paper manufacturer
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 10
Built for Life
Dependable partnershipWe know just how important the reliability andperformance of your operations are to yourbusiness. You can count on PCM pumps to keepyour fluids moving smoothly as they make their waythrough the variety of demanding processes andapplications that lie at the heart of your business.
Eye on the end userIn today’s just-in-time economy, your customersexpect your industrial processes to never stopworking. With one eye on your customers’requirements and one eye on workingconstructively with your other suppliers, we ensurethat our pumps contribute to meeting andexceeding your customer services objectives.
At the heart of industryPCM serves six highly demanding industrial markets. While all ofthem share similar requirement in terms of reliability, costeffectiveness and productivity, each has special needs that PCMmeets with perfectly adapted pumping systems.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 11
Markets
New Energies
Pump systemscapable of handlinga wide range of fluidsand solids accuratelyand reliably.
MechanicalEngineering
Robust and versatile pump systems that can be easily integrated into your production chains, whether upstream during manufacturing or downstream during waste processing.
Environment
Pump systems for the cost effective handling of industrial and municipal waste water.
Chemicals
Precision pumps for handling fragile, complex fluids, and hard working, easy to maintain pumps for transferring chemicals.
Paper
Productivity, water treatment and dosing are the main pumping challenges in the paper industry.
Minerals
Robust, easy to maintain pump systems that keep costly downtime to a minimum.
Multifaceted expertise
11
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 12
Built for Life
EnvironmentOne of the most important challenges
in environmental protection is the cost-effectivetreatment and handling of municipal and industrialwaste water. PCM pumps are used to handleindustrial and municipal waste water and sewage,dewater sludge, and meter chemical additives.
Case study: water treatment plant.
Challenge:Providing a reliable and economical solution onsludge transfer and polymer dosing.
PCM Solution:EcoMoineau progressing cavity pumps.
Results:On both applications, EcoMoineau pumps provedto be a long lasting choice requiring very limitedmaintenance.
Solid versatilityMature industries require pumps and pump systems capable ofhandling a wide range of tasks as cost-effectively as possible.Their ability to handle aggressive liquids and extreme operatingconditions are also a must.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 13
13
Markets
Mechanical EngineeringLight and heavy industries require versatile pump
systems that can be easily integrated into their production chains,whether upstream during manufacturing or downstream during wasteprocessing. Pumps need to be reliable, robust and capable of handlinga wide range of emulsions, metal particles and corrosive materials.
Case study: surface treatment/spent bath emptying.
Challenge:Find a pump capable of handling a variety of corrosive products withparticles. Dry running and self priming functionalities. Easymaintenance and mobility would be a plus, as customer had negativeexperience with AOD (Air Operated Diaphragm) pumps whose valvesrequired frequent maintenance due to clogging.
PCM Solution:Delasco hose pump on a trolley with starter control panel was thenatural choice.
Results:Flexible, highly mobile solution improved productivity and reducedmaintenance requirements and costs.
ChemicalsProduct compatibility and versatility are what the
chemical industry looks for in pumps. Manufacturers of specialtychemicals in particular, require pumps capable of handling fluids withfragile composition and complex rheology.
Case study: detergent manufacturer.
Challenge:Mixing the ingredients and filling containers.
PCM Solution:Customized chemical dosing and filling system including Delascohose pumps. The hose pump versatility allows it to be used withvarious aggressive chemicals.
Results:Customer was pleased by the TCO (total cost of ownership) of thesystem, which requires low maintenance and low energy whileallowing accurate filling of various sizes of containers.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 14
Built for Life
New EnergiesTo meet their promises of
sustainability, new energies must combineenvironmental responsibility with real-worldeconomics. To reach economically viableproduction levels, their industrial processes requirepump systems capable of handling a wide range offluids and solids accurately and reliably.
Case study: biodiesel unit.
Challenge:Customer needed to empty waste cooking oilfrom road tanker. This oil could include someabrasive particles. The pump had to fit in a smallspace and be easily serviceable.
PCM Solution:PCM installed an Ecolobe pump.
Results:The small footprint of this pump allowed it to fitin the allotted space. It has so far been workingmaintenance-free for over two years.
Constant productivityIn many industries, productivity rhymes with profitability. Theability to work non-stop in demanding operating conditions iswhat companies in these sectors expect from their pumps andpump systems.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 15
15
Markets
MineralsAbrasiveness is number one challenge in the mineral
industry. Downtime caused by equipment failure can bring an entirequarry or production facility to a halt. Consequently, robustness, easeof maintenance and spare part delivery times are of the utmostimportance.
Case study: quarry operator.
Challenge:Sand was entering the pumps and damaging the rotors, whichrequired frequent maintenance.
PCM Solution:PCM developed a special abrasion-resistant rotor coating for itsprogressing cavity pumps.
Results:Rotor lifecycle extended from six to sixteen months.
PaperThe paper industry is one of the most demandingsectors in terms of productivity, water treatment and
dosing. Most production facilities operate non-stop, and any downtimecan be costly. In addition, paper and pulp plants use incrediblequantities of water, which they must manage and treat in accordancewith strict regulations.
Case study: paper plant with 30 PCM pumps installed in the 1980s.
Challenge:Reduce annual water consumption of 2,625 m3 per pump.
PCM Solution:We retrofitted each Moineau pump with a self-contained lubricationsystem that eliminated the use of water.
Results:Water consumption of pumps reduced to zero. Over 78,000 m3 ofwater saved annually.
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 16
E-B
R11
00IN
D06
/08
PCM
rese
rves
the
righ
tto
chan
geth
isda
taat
allt
imes
.Thi
sdo
cum
entw
aspr
inte
dw
ithto
xic-
free
ink
Website: www.pcm.eu
E-mail: [email protected]
Plaquette_INDUS_V4.qxd 30/06/08 10:29 Page 1