Embed Size (px)
Citation preview
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
PBR AF 110 CNC
MACHINE INFO
Manufacturer
Type
Year of manufacture
Machine number
Control
Travels
NC-table (B-axis)
Table size
Spindle
Speed
Universal angular head
Internal coolant through the spindle
PBR AF 110 CNC | 2
2
NC – rotary table with indexing
below 0,001 degree (360.000) via round-Inductosyn HEIDENHAIN Index accuracy +/- 4s - Repeatability +/- 3s incl. 4-axis and simultaneous movement capability of 3 axes at the same time
Rotary table
with clamping surface 1.250 x 1.500 mm for a table load up to 4 t
Travel measuring system
X, Y, Z, W Manufactured by HEIDENHAIN
Coolant device through the tool
(Main spindle) incl. coolant system with a flexible hose and spray nozzle with increased delivery capacity 130 l / min, water collector plates at the table
Electronic hand wheels
Including complete workplace, angle plate, tool holder, tools, boring head, tool cabinets and pre-setting device
PBR AF 110 CNC |
ADDITIONAL EQUIPMENT
3
2 PBR AF 110 CNC |
TECHNICAL DATA
Working spindle
Diameter of the boring spindle
Taper
Diameter of the milling spindle
Milling cutter housing diameter
Traversing
Axial displacement of the main spindle - Z
Vertical displacement of the headstock - Y
Transverse displacement of the table - X
Longitudinal displacement of the carriage – W
Speed feed
Spindle speed infinitely variable, 2 stages
Feed infinitely variable X, Y, Z, W
Rapid traverse
Rotary table
Working surface
permissible workpiece weight Engine power
Main motor for spindle drive
Axis motor for feed drive
Weight
Net weight in standard version
4
2 PBR AF 110 CNC |
The machine is designed with the CNC control HEIDENHAIN TNC 430
BC 120 Color display 14‘‘, measuring system HEIDENHAIN
provided with: - Working spindle made of nitrided steel, extremely accurate Automatic tool clamping with taper ISO 50
- Machine bed with 4 bearing guides
- Bed-carriage and rack guides induction hardened and polished
- Side guideways with hardened and top steel strips. The corresponding lateral guides on the carriage run on ROTAX roller guide elements
- Precision ball screws with preloaded double nut for driving the X, Y, W and Z axis
- Hydraulic clamps for axes X,Y,W,Z,B of the hanging switchboard, controlled indipendently from each other
- Automatic precision rotary table, centered on high-precision bearings and backlash-free adjustable
- Spindle speed in two areas continuously adjustable
- Feed speed in axes X, Y, W, Z, infinitely
- Automatic lubrication by clock for all guides
- Circulating oil lubrication of the bearings and drive elements in the headstock
- Telescopic covers for horizontal guides
- Telescopic covers for the vertical guides
- Main motor 14.7 kW for spindle drive
- Direct drive motor 6.3 kW for the feed drive with electrical switching and control unit in a free-standing cabinet
- Hanging panel with all switching elements incl. speed and feed circuit
- Fine adjustment of the axes X, Y, W, Z means of an electronic cross-switch on the hanging panel
- Receiving flange-operation key operating instructions, spare parts list
- Automatic tool-clamping device
- Electrical equipment for 400 Volt, 50 Hz, protection class IP 54 with ventilation and filter station in accordance with DIN and the UVV CE- conform
5
2
MASCHINENBILDER
PBR AF 110 CNC | 6
2
FOUNDATION PLAN
PBR AF 110 CNC | 13
2
FLOOR PLAN
PBR AF 110 CNC | 14
2
TRANPORT PLAN
PBR AF 110 CNC | 15
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
