RESUME COVER PAGE

PATRICK BROPHY

Position of Interest: Work-Pack developer

Availability / Notice Period: Available immediately

Australian Visa Status: Australian Citizen

INTERVIEW SYNOPSIS:

Highly Experienced in the O&G industry for over 15 years primarily in Offshore Maintenance, FPSO's, Platforms, LNG process plants, Operations and Major Shutdowns. I began in my career as a Mechanical Fitter at Karratha Gas Plant. During this time, been tasked as a Shutdown Co-ordinator, Project Engineer, Mechanical Technician, Operations Technician, most recently Co-ordinating and planning work scopes for various Woodside Energy maintenance and shutdown projects.

Contact: Patrick Brophy

patrickbrophy1@hotmail.com 0419907767

Safety Quality and Cost Focused

CAREER SUMMARY Qualified offshore mechanical and operations technician with 15 years Oil & Gas experience primarily in offshore major maintenance and FPSO operations. I have extensive experience with turbines, pumps and compressors, and my most recent roles have included supervisory, shutdown planning, Mechanical co-ordination and project engineering responsibilities. Currently I work for CAMCO Engineering subcontracting through Wood Group WGPSN to Woodside Energy, on the KLE Project. The project scope is for replacement of all Marine Loading Arms on the Berth 1 & Berth 3 LPG, LNG jetties. The role is Perth based with some site responsibilities. The main focus is on understanding the full scope of work - Development of mechanical Job Cards and Work packs, procurement of materials and labour, then execution of work scope.

Prior to Camco I was a Woodside energy Employee where my last role was Maintenance Leader-Mechanical Co-ordinator. I was responsible for the planning and execution of all topsides mechanical scopes for a Major FPSO Shutdown (OKHA). Attention to detail and quality of work were paramount for this role. My Mechanical experience, SAP planning and resourcing skills, IT computer skills, process knowledge, ability to read P&ID's and isometric drawings all were part of the reason I was selected for this role. When developing Work packs, having quality relevant information with the latest revision standards, procedures and drawings is of utmost importance, along with risk assessing the job from the beginning. I have experience writing procedures, closeout certificates, permits, checklists, photographs, torque sheets, drawings, and safety audits. I am a current Work scope Authorisor in the ISSOW system at Karratha Gas Plant. I have Mechanical and Operations experience, and understand the whole scope when It comes to planning a task for execution. I logically walk through job sequence steps, and can see how possible conflicting activities could occur and disrupt the work flow process. I have worked to deadlines previously and can handle high pressure situations by prioritizing my workload and systematically approaching one task at a time from start to finish. I track my progress via a spreadsheet register or database so progress can be easily tracked.

I believe my industry experience, extensive mechanical experience, good interpersonal and communication skills, strong work ethic and commitment to safety and continuous improvement, would make me an ideal candidate for a position within your organization.

EMPLOYMENT HISTORY

MECHANICAL CO-ORDINATOR\PROJECT ENGINEER Nov 2015 – Present CAMCO Engineering – Woodside Energy, KLE project – Marine Loading Arm replacement project. Perth WA Project Engineer based at both Perth and site for the purpose of providing technical support to office based engineering activity as well as Site Supervision of work scope during execution phase. Mechanical Co-coordinator/Project Engineer responsibilities:

• Responsible for review and approval of drawings, including designing and drafting accurate engineering drawings with Accurate details, red line mark ups and scope identification.

• Verify all management plans of contractors are aligned to the objectives of the Client. • Provide quality representation at client, supplier and contractor meetings • Conduct vendor evaluation and audit of suppliers, and contractors engaged to conduct business. • Responsible for improvement actions raised, Non-conformance, and Preventative Action items. • Verify contractor work packs are 100% accurate and reliability of documentation and • Ensure all parties responsible for carrying out work at site have been suitably inducted and are aware of required quality

Outcome, Performance management, competency management. • Develop- work packs, documents, templates, Xcel registers, procedures, ITP's, ITR's, work method statements, quality

Control for completed work packs, squad checks. • Coordinate onsite Permits – ISSOW Work Scope Authorizer • Provide technical support and assistance to the project manager and tradesperson. • On site, inspection, QA/QC, responsible for identifying root cause of engineering technical issues, identifying solutions and

Creating an engineering inspection report, with solutions and detailed SOW • Ensure works are undertaken within the scope provided by the client to the specification or higher • Ensure that when developing method statements, developing work packs, planning and ordering tools and equipment,

Health Safety & Environment factors are considered first and foremost. • Procurement of quality materials and tooling, cost focus, vendor quote management and negotiation.

MAINTENANCE LEADER SD MECHANICAL Jul 2014 – April 2015 Woodside Energy Ltd – Operations, Maintenance, Shut Down Planning. Perth WA

Position: Manage all mechanical topsides SAP work scopes for Okha FPSO, Singapore dry dock shutdown planning, estimating and supervision, quality and cost focus.

• SAP PM Front end management of all mechanical shut down work orders, operations, and materials, development of

mechanical work scopes, work orders, and project work orders. • Work pack development – develop detailed work scopes, step by step description, source controlled documents, drawings

(mark up isolations), mark up photo's, develop procedures, work requests and permit development, accurate bill of materials.

• Ordering long lead components and materials, creating purchase orders. • Liaise with supply chain, procurement and cataloguing. • Update SAP master data, via X1 notifications, revise and update procedures. • Worked directly with engineering team system owners to develop top sides work scopes and present to Singapore

shipyard to provide an accurate quote for materials, isolations and labour. • Conducted regular site visits to photograph and estimate resources for shut down work orders, communicate progress to

offshore managers, plan and manage team IAR's (flight bookings). • Daily communication with shut down planner for primavera planning logic updates, accountable for deadlines, sound

understanding of maintenance business process. • Presented progress reports and facilitated weekly meetings, communicated with managers. • Maintenance and operations background – proficient SAP skills, ISSOW isolation philosophy, draining and purging

requirements, mechanical disassembly, rigging and scaffolding requirements, correct documents, reference latest revision standards and procedures, reference ANSI piping specs, identifying and ordering correct materials, flange management and integrity, management of change.

• Finding solutions and implementing continuous improvement ideas, challenging scopes, maximizing value by developing templates, spreadsheets, scope document sheets, updating master data, challenging materials, quality and cost focus.

PRODUCTION MAINTENANCE TECHNICIAN / TRAINEE PROCESS OPERATOR Jul 2013 – Jul 2014 Woodside Energy Ltd WA FPSO Nganhurra

Position: Offshore FPSO trainee process operator/maintenance technician, utilities area authority, maintain and monitor engine room equipment, attain Process Operations competency, fire and emergency team.

• Utilities Area – manage permits, hazards and work scopes in accordance with ISSOW. • Follow operating procedures, demonstrate strong safety culture and encompass values. • Monitor systems, identify faults in machinery and equipment, maintain all utilities systems on a daily basis, utilise SAP to

report, repair and record history. • Crude cargo management and off-take operations; IGG operation, diesel bunkering. • Respond to alarms, investigate and take action. • Weekly fire pump, essential generator and emergency generator startup and testing. • Starting and stopping of machinery equipment. • Monitor, flow, temperature and pressure of systems. • Bilge transfers and pump line ups. • Chemical dosing and handling materials in accordance with MSDS. • SAP PM weekly operations plan. • RO water purification plant operation and maintenance. • Operate and monitor diesel and lubrication oil purifiers. • Prepare tanks for confined space entry. • BA team – confined space gas testing. • Gas testing of confined spaces, bump testing and calibration of gas detectors. • Maintained marine logs daily, area rounds and routines, and checklists. • Emergency Fire team member – contribute to emergency drills. • Manage competencies, training records, assignments and process system addendums.

PRODUCTION MAINTENANCE TECHNICIAN MECHANICAL – MAJOR MAINTENANCE Jan 2007 – Jul 2013 Woodside Energy Ltd WA North Rankin, Goodwyn Alpha, FPSO Nganhurra

Position: Leading Technician responsible for safe and efficient execution of campaign SAP maintenance plan, supervising and organizing teams of contractors, core crew backfill, shutdown execution, work order management from estimating and resourcing, to history and closeouts.

• Supervise teams of contractors – organising work packs and permits, holding safety discussions. • Quality control, ensuring safe work is undertaken in accordance with iSSoW. • Diagnose faults in machinery and equipment; report, repair and record. • Highly experienced in SOLAR turbine maintenance, engine/gearbox change out, fault diagnosis, water washing, engine

start-up, following operating procedures, and hand over certificates. • Work to a campaign SAP PM maintenance plan, operate totally self-sufficient, organising all aspects of work, sourcing

materials, creating permits, liaise with operations, liaise with deck crew/cranes for lifts, work execution to a high safety standard, permit close out.

• Highly experienced in maintaining offshore pedestal cranes, servicing, hydraulics, rope greasing and change out, inspections, rota bolt tensioning, diesel engine maintenance, function load testing and certification.

• Overhaul and maintain all valves and process pipe work, ensuring flange management and technical integrity of pipe work is maintained.

• Competent in maintaining, diagnosing and overhaul of all offshore mechanical systems and equipment. • Hydraulic bolt tensioning, torqueing, gasket and bolt identification, flange management and integrity. • Operate drills, saws, welders, fabrication of mechanical components. • Work with industrial chemicals and materials in accordance with MSDS. • Hold performance discussions, manage personal development, competencies and training.

Mechanical Fitter - Valve Technician 2005 – 2007 Transfield Worley WA Karratha Gas Treatment Plant

• Overhaul and certify pressure safety valves, replace internal seals, lap valve seats, setting and adjusting pressures, leak

testing, site trips to remove and replace valves. • Slinging and dogging crane, operate workshop crane, drive forklift, and write permits. • Operate all workshop machinery, machining skills – lathe, mill, surface grinder, pedestal drills, grinding, dynamic balancing

testing pump shafts, welding, sheet metal, fabrication principals, and precision measurement. • Shutdown experience – vessel spading, control valve overhaul, surface grinding turbine shims to high tolerance.

Offshore Mechanical Maintenance Technician 2004 – 2005 Woodside Energy Ltd WA Goodwyn Alpha Platform

• Core crew mechanical maintenance team. • SAP weekly maintenance plan execution. • Turbine engine change out and maintenance, pedestal crane maintenance, process filter replacement, valve and spool

maintenance, managing permits, fabrication of brackets, vessel spading confined space entry, pump overhaul, mechanical seals, bearing replacement, heat exchangers, bolt tensioning, inspections, technical integrity, lifeboat maintenance, general rigging, dogging and deck operations.

• Major shutdowns.

Apprentice Mechanical Fitter 2000 – 2004 Woodside Energy Ltd WA Karratha Gas Treatment Plant

• Preventative maintenance of fixed plant machinery. • Working on Frame 5 turbine overhaul during LNG train major shutdowns, reciprocating compressors, centrifugal

compressors, auxiliary systems, control valves, fin fans belts and bearings, fire and gas system maintenance, nitrogen plant, diesel generators, hydrostatic testing, pump overhaul, mechanical seal replacement on cryogenic pumps, LNG loading arms, and hydraulic system maintenance.

• Accessing spools and valves and managing pallets of mechanical equipment. • Machining workshop – 6 months (operate mill, lathes, surface grinder, welder).

QUALIFICATIONS Certificate III in Process Plant Operations – 2014 Certificate III in Process Plant Technology PMA – 2014 VCAT1 ISO Vibration Analysis – 2012 Certificate III in Engineering Mechanical Trade Certificate – 2004

CERTIFICATES & LICENCES

• ICE Line Supervisor - Relationship (2015) • Estimate Activity Resources (2015) • Continuous Improvement: Customer Driven End-to-End Processes (2015) • Continuous Improvement: Visualizing Performance (2015) • iSSoW KGP Work scope Authorizer (2016) • NGA Site Assessment Utilities (All 18 Systems) Site Assessment (2014) • AMSA Medical Fitness (2014) • Code of Conduct (2014) • H&S Conversations (2014)

• Procurement Via Ops Work Order (2014) • Supply Chain Basics: Requesting Materials and Services (2014) • TCMS Technical Change Management Awareness (2014) • Technical Integrity Awareness (2014) • Operate Breathing Apparatus (2013) • MSIC: Maritime Security Identification Card (Veritas) (2013) • Confined Space Rescue (ERGT) (2013) • Enter Confined Space (2013) • Fire Team Member: Fire Fighting and Operate Breathing Apparatus (2013) • Introduction to Safety Case Training (2013) • Golden Safety Rules (2013) • NGA ER Module Muster Checker Duties (2013) • Nitrogen Awareness (2013) • Operation and Maintenance Mars Compressor Set (2013) • Safe Working at Height (ERGT) (2012) • Gyrolok Instrument Fitting (2012) • TBOSIET Offshore Safety and Emergency Training (ERGT) (2011) • Operate Breathing Apparatus – ER (2010) • Plant Maintenance Basics (2008) • Plant Maintenance Repair Basics (2008) • PM Master Data Change (X1) Process (2008) • Dogging Ticket (2001) • Forklift Ticket (2001)

KEY SKILLS / COMPETENCIES

Mechanical Expertise – Highly skilled in offshore maintenance with 8 years experience Major Maintenance Mechanical Technician on Woodside offshore platforms and FPSO's. Highly experienced in overhaul of turbines and compressors, turbine engine and gearbox change out, safety system maintenance and integrity testing, deluge skid pilot/main valve overhaul and testing, valve and spool installation, milling and lathe competent, precision measurement of bearings, diesel engines, sound knowledge of ANSI piping specifications, bolt and gasket identification, flange management, hydraulic bolt tensioning, offshore pedestal cranes, hydraulics, utilities systems, instrument air systems, FPSO marine systems, condition monitoring, VCAT1 vibration spectrum analysis, extensive shutdown and project work experience, own isolations, SAP maintenance plan, general rigging, dogging and deck operations.

Operations – Operator craft; utilities competency, FPSO marine experience, operating principals and laws, interpret P&ID's, cause and effects, diagnosing faults, ISSOW permits and isolations, understand and respond to alarms, isolating equipment, mechanical equipment knowledge, understand subsea and riser principals, understand process flow path, monitor ballast systems, flare systems, DCS/ICS awareness, monitor trends, operate fire pump, deluge testing, lifeboat maintenance, confined space BA entry, start up of equipment, pumps turbines and compressor gas seal systems, valve line up's, emergency team member, helicopter landing crew, safety audits and discussions, shutdowns, gas testing, developing permitry, maintenance and overhaul of mechanical systems, integrity testing, tank ullage measurement, daily rounds, shift handovers.

Supervisory – proven ability to supervise small maintenance teams, organise work, hold safety discussions, ensure QA/QC, permit holder, SAP work order history-close out, time confirmations for contractors, weekly maintenance plan execution. Responsible for coaching and mentoring, facilitating meeting agendas with office based staff, identifying and implementing continuous improvement opportunities. Strong interpersonal skills and ability communicate fluently, coach and mentor, hold performance discussions, communicate with operations management team on a daily basis, participate in meetings.

IT Skills – proficient in SAP PM business process with 8 years experience in developing notifications, work orders, cataloguing materials, time confirmations, resourcing materials, attaching documents, marking P&ID's estimating labour, Adobe Pro, Word, Excel, Database and web based portal systems, ISSOW experience developing permits and isolations, experience developing shutdown maintenance work packs and isolation hierarchy, developed work scopes and job procedures for FPSO shutdowns.

Safety Culture – 8 years offshore has embedded a strong passion for and commitment to safety. I am competent in operating and maintaining offshore safety systems and understand the importance of technical integrity. I have the utmost respect for following procedures, promoting safety culture, and hazard identification and reporting. I have chaired and minuted safety meetings, taken responsibility for safety close out items, NOPSEMA, and Lloyd's action items. Competent offshore operations Fire and emergency team member, helicopter fire team member, oil spill response, confined space rescue, hydrocarbon atmosphere testing, BA rescue, technical integrity testing of safety systems, offshore platform safety representative – North Rankin for 2yrs. I have experience with cargo inert tank management, ballast systems, cyclone tie down and riser disconnect, first priority investigation, level two risk analysis, rescue plans, emergency drills, safety case, code of conduct, muster checker duties, dangerous goods by air, nitrogen awareness.