Upload
nguyenkhue
View
214
Download
0
Embed Size (px)
Citation preview
Agenda
1. Fall Facts
2. Patient Selection
3. Fall Risk Assessment
4. Footwear
5. AFO Casting
6. MBB Dispensing
7. Keys to Success
Fall Facts
• Leading cause of injury related death in seniors
• Leading cause of hospitalization for injury in adults 65+
• Cause of 95% of hip fractures
• 67% of fall victims (65+) are discharged to nursing facilities; 50% of whom will never live independently again
• Direct medical costs associated with falls >$30B annually
Reference: www.cdc.gov
Patients to look out for
• 65 and older
• Already fallen
• Use assistive devices such as walkers or canes
• Difficulty rising from a chair
• Unsteady on their feet
• Ill-fitting shoes
Patient Assessment
• Fall Risk Assessment
• Shoe Fitting Assessment
• Biomechanical Examination
• Comprehensive Diabetic Foot Exam (CDFE)
Assessing Footwear
• Are shoes causing pain • Are they poorly fitted • Are the soles/heels slippery • Are the soles too thick/heavy • High-risk styles
o High heels o Mules o Slippers o Flip-flops o Sandals
Postural Sway
• Constant displacement and correction of the center of gravity over the base of support
• Factors found to be correlated with increased postural sway include: o Reduced peripheral sensation
o Poor near visual acuity
o Slow reaction time
Casting Materials
CONTENT OF CASTING KIT 1. Medium Mid Leg STS Sock (2) 2. Foot Board 3. Casting Foam 4. Scissors 5. Letter Opener 6. Plastic Bag (2) 7. Indelible Pencil 8. Plastic Tube 9. Cutting Strip
• Other items needed: o Tape o Gloves o Water
Positioning the patient
• The patient should be seated, semi-weight bearing, with the hip, knee and ankle all at 90°.
• Be aware of the patient’s positioning before and during the casting. Prevent patient tendency to gradually change position before casting is complete.
Using a foot board
Casting using a contoured foot board enables the AFO to fit better inside a shoe.
The importance of a good cast The Moore Balance Brace is custom made to the cast that is sent. Accuracy in casting is a requirement for the brace to fit properly.
Casting with an STS Sock
STEP 1 With the foot at 90° to the leg, place cutting strip on dorsum of foot.
Casting with an STS Sock
STEP 8 Snip a small hole at the base of the cutting tube for easier removal of the cast later.
Casting with an STS Sock
STEP 10 After gently massaging the STS sock with wet gloves, hold the patient’s
limb in the desired position until the STS sock becomes hard.
TIP - Positioning the patient
Patients commonly look down and watch as you cast,
especially as the sock hardens. This will alter their
positioning. Encourage them to remain in a neutral
position.
Casting with an STS Sock
STEP 12 Starting from the hole you made at the base of the cutting tube, cut upward to allow for the removal of the cast.
Casting with an STS Sock
STEP 14 Place a rubber band around the cast which will help it remain in it’s correct form as it hardens.
Examples of bad casts
Didn’t allow enough time for cast to set prior to shipping and cast became disfigured.
Take time to ensure the best results
If you are unsure about the quality of the cast you have taken, take another one. You will save time and money and your patient will appreciate not having to return on another day for a second casting session.
Shoeing the MBB • The right shoe is critical for the
success of the MBB. • Recommendation: SafeStep shoe
catalog has category called “Balance Improvement” o New Balance 812 o Orthofeet 910, 916, o Brooks Addiction Walker o Apex Berries
Shoeing the MBB
• Order shoes along with the MBB
• Alternatively carry a size run of balance shoes
• Educate MBB patients about the importance of wearing appropriate shoes
Donning the MBB
1. Replace shoe insole with MBB spacer.
2. Place MBB into shoe, snug against the heel.
3. Show the patient how to grasp the MBB so that they can slide their foot into both the shoe and the MBB.
o If the foot doesn’t slide smoothly into the shoe/MBB, re-evaluate shoe size and width.
Donning the MBB
4. Show the patient how to grasp the MBB so that they can slide their foot into both the shoe and the MBB.
o If the foot doesn’t slide smoothly into the shoe/MBB, re-evaluate shoe size and width.
5. Once foot into MBB/shoe, show patient how to adjust the tongue of the MBB and to pull the Velcro straps over and across the ankle.
6. Allow the patient to adjust the tightness of the straps
7. After fastening the 2 velcro straps, the patient should be ready to walk
Walking for the first time with the MBB
• Require patient to continue using their cane or walker.
• Ask if MBB hurts, rubs or causes any discomfort.
o If so, check shoe fit.
• Check that straps of MBB not too tight.
o Most common complaint upon first walking
• Encourage a “break in” period, though don’t prevent continuous use if MBB feels good and offers improved stability.
Keys to success
• Look for patients at risk for falling • Schedule separate fall risk assessment
appoinment • Educate about shoe fit and other risk factors for
falling • Educate using an MBB sample • If indicated, cast for MBB on fall risk assessment
visit • Encourage additional treatment modalities (PT,
home health care, exercise)
SafeStep
MBB Post-Webinar Starter Kit
• MBB Sample
• STS Casting Socks
• Fall Risk Assessment Tear off Pad
• Exercise Guide
• Compliance Docs
• Order Forms
• UPS Labels
• MBB Patient Brochures
• MBB Poster
• SafeStep Shoe Catalog