REPAIR PARTS PRICE LIST

FOX PRODUCTS CORPORATION Oboe, English Horn, Bassoon & Contrabassoon

October 1, 2000

FOX PRODUCTS CORPORATION 6110 S. SR 5, P.O. BOX 347, SOUTH WHITLEY, IN 46787 U.S.A.

Telephone: (260) 723-4888 FAX: (260) 723-6188 WWW.FOXPRODUCTS.COM MAIL@FOXPRODUCTS.COM

i

General Information

Scope: Using this list with our Accessory Price Lists (Bassoon & Oboe) will provide a complete picture of all of the merchandise we sell in the normal course of business. This list does not attempt to catalogue every part that is available. Almost everything we keep in inventory is available for sale. If you believe we may have something that you need and you can’t find it on our price lists, do not hesitate to call.

Terms: All prices are list prices and are therefore subject to appropriate dealer discounts. Prices are F.O.B. South Whitley (meaning you pay shipping) and are subject to change without notice. Should an item be listed on multiple price lists at conflicting prices, the higher price prevails. Payment must be made in U.S. Funds and can be made by check (drawn on a U.S. bank), money order, wire transfer, or credit cards (MasterCard, Visa or Discover Card). No warranties, express or implied, are made for the parts contained herein, and our liability for any defective merchandise is limited to replacement of the defective part.

Domestic Shipping: Shipments are usually sent by United Parcel Service. However, some smaller orders are sent by U.S. Mail to save you shipping costs. Please note that UPS does not deliver to Post Office boxes, therefore, all orders to P.O. boxes will be sent by United States Mail. Finally, express delivery service is available, please call for prices.

International Shipping: Shipments will be sent as per your instructions.

Advice & Assistance: If you need technical assistance with any double reed problem please give us a call. We may have the answer to your problem or can direct you to someone who does. In many cases our parts can be used to fix instruments of other makers.

All prices are subject to change without notice.

Address all orders and inquiries to:

Fox Products Corporation 6110 S. SR 5, P.O. Box 347

South Whitley, IN 46787 U.S.A. Phone: (260) 723-4888

Fax: (260) 723-6188

ii

Table of Contents

General Information ................................................................................................................................... i

Table of Contents ...................................................................................................................................... ii

Historical Information ............................................................................................................................ iii

BASSOON PARTS .................................................................................................................................... 1 GUARDS AND OTHER ATTACHMENTS .......................................................................................... 1 BELL RINGS .......................................................................................................................................... 1 WHISPER KEY LOCKS ........................................................................................................................ 2 BODY SCREWS ..................................................................................................................................... 2 BOCAL PARTS ...................................................................................................................................... 2 BOOT CAPS ........................................................................................................................................... 2 U-TUBES AND RELATED PARTS ...................................................................................................... 3 SPRINGS ................................................................................................................................................. 3 KEY ROLLERS ...................................................................................................................................... 3 HINGE SCREWS .................................................................................................................................... 4 TONE HOLE LINERS ............................................................................................................................ 5 TENONS & SOCKETS........................................................................................................................... 5 POSTS ..................................................................................................................................................... 6 PAD CUPS .............................................................................................................................................. 6

CONTRABASSOON PARTS ................................................................................................................... 7 CONTRABASSOON KEY PARTS ........................................................................................................ 7

BASSOON KEY PARTS .......................................................................................................................... 8 STANDARD KEYS ................................................................................................................................ 8 SPECIAL ROLLER SPATULAS .......................................................................................................... 10 SPECIAL KEYS.................................................................................................................................... 10

OBOE PARTS ......................................................................................................................................... 12

OBOE KEY PARTS ................................................................................................................................ 15

BULK MATERIALS ............................................................................................................................... 18

iii

Historical Information This list is useful as an approximate guideline for the age of Fox and Renard bassoons and oboes. Information concerning specific instruments can be obtained directly from Fox Products. Serial numbers are assigned early in the production process and do not necessarily reflect the shipping dates. The number indicated for each year represents the serial number of an instrument shipped at the beginning of that year. Nearby serial numbers may have been shipped a couple of months sooner or later. Both Fox and Renard bassoons use the same sequence of numbers. Fox and Renard oboes and Fox contrabassoons each use their own separate serial number sequences. Fox and Renard English horns were introduced in August of 1999 and also have their own serial number sequences. Fox and Renard Bassoons1951 No. 1 1952 No. 2 through No. 13 Records for 1953 and 1954 are incomplete 1955 No. 245 1956 No. 318 1957 No. 365 1958 No. 444 1959 No. 502 1960 No. 551 (First plastic bassoon: No. 638) 1961 No. 640 1962 No. 763 1963 No. 890 1964 No. 1018 1965 No. 1169 1966 No. 1372 1967 No. 1623 (First short bore model: No. 1894) 1968 No. 1973 1969 No. 2355 1970 No. 2678 1971 No. 2995 (First Renard Bassoon: No. 3013) 1972 No. 3402 1973 No. 3934 1974 No. 4438

1975 No. 5059 1976 No. 5815 1977 No. 6405 1978 No. 7030 1979 No. 7765 1980 No. 8511 1981 No. 9165 1982 No. 9965 1983 No. 10805 1984 No. 11385 1985 No. 12120 1986 No. 12906 1987 No. 13695 1988 No. 14495 1989 No. 15408 1990 No. 16410 1991 No. 17305 1992 No. 18439 1993 No. 19613 1994 No. 20819 1995 No. 22030 1996 No. 23240 1997 No. 24575 1998 No. 26032 1999 No. 27970 2000 No. 29939

Fox and Renard Oboes: 1975 No. 255 1976 No. 380 1977 No. 539 1978 No. 740 1979 No. 934 1980 No. 1195 1981 No. 1455 1982 No. 1765 1983 No. 2082 1984 No. 2489 1985 No. 2988 1987 No. 3916 1988 No. 4514

1989 No. 5254 1990 No. 6112 1991 No. 6990 1992 No. 7775 1993 No. 8717 1994 No. 9700 1995 No. 10846 1996 No. 12016 1997 No. 13120 1998 No. 14413 1999 No. 15700 2000 No. 16819

1

BASSOON PARTS

GUARDS AND OTHER ATTACHMENTS Standard Guards No. 67.1 Neck Strap Ring, nickel or silver (old screw-in style) ............................................ $19.50 No. 65.2 Neck Strap Ring, plated mounted, nickel or silver ................................................. $36.00 No. 65.3 Neck Strap ring, plate mounted, nickel or silver, for use with balance hanger ...... $36.00 No. 69 Low E (Pancake Key) Guard, nickel or silver ........................................................ $19.50 No. 75 A Tone Hole Guard, nickel or silver ...................................................................... $19.50 No. 83 G' Tone Hole Guard, nickel or silver .................................................................... $19.50 No. 85 Foot Guard for G and B( Trill Spatulas, nickel or silver ......................................... $19.50 No. 87 Low D Guard, nickel or silver ................................................................................ $36.00 No. 89 Wing Stop Block, for bass joint, nickel or silver ................................................... $19.50

Special Guards No. 29 B( Guard, nickel or silver ........................................................................................ $36.00 No. 29C B( Spectacle Guard nickel or silver ........................................................................ $72.00 No. 30 A(/B( Trill Guard, nickel or silver .......................................................................... $60.00 No. 90 C' Trill Key Guard, nickel or silver ........................................................................ $24.00 No. 932B Palm Guard for Bassoon, nickel or silver ............................................................... *

Body Locks * Please see our Bassoon Accessory Price List for the Body Lock and the Replacement Pin & Spring prices No. 1232 Bassoon Body Lock, nickel or silver ...................................................................... * No. 1232A Replacement Pin & Spring for Body Lock, nickel or silver .................................... * No. 155.5 Coil Spring, for body lock ...................................................................................... $0.60 No. 155.6 Body Lock Wing Bushing ....................................................................................... $3.41

Crutches and Crutch Brackets Please see our Bassoon Accessory Price List for crutches and brackets No. 71.1 Thumb Screw for Crutch Bracket, nickel or silver .................................................. $2.75 No. 73.6 Lock Nut for Screw Stem Crutch, silver ................................................................. $21.00

Balance Hanger * Please see our Bassoon Accessory Price List for Balance Hanger prices No. 67BH Bassoon Balance Hanger, nickel or silver ............................................................... * No. 67BH5 Thumb Screw for Balance Hanger, nickel or silver ................................................ $8.50 No. 67BH6 Bushing for boot joint ............................................................................................. $3.25

Bassoon End Pin No. 810 Bassoon End Pin Assembly, nickel or silver ............................................................ $120.00 No. 810 Bassoon End Pin Assembly, unplated ..................................................................... $115.00 No. 810A Bassoon End Pin Bracket only, nickel or silver ....................................................... $94.00 No. 810A Bassoon End Pin Bracket only, unplated ................................................................ $89.00 No. 810B Bassoon End Pin only ............................................................................................. $15.00 No. 810.1 Rubber Tip for #810B End Pin ............................................................................... $3.22 No. 810.2 Thumb Screw for #810 Spike Assembly, 1/4”-20 thread ........................................ $9.12

BELL RINGS #103 Plastic Bell Ring ..................................................................................................... $24.00 Fox bell rings are molded from ivory colored plastic. They are molded to finished dimensions to fit Fox and Renard bassoons and do not require machining to fit. Fox bell rings are usually too large to fit most other makes of bassoons. “Semi-finished” bell rings are not available. #103.1N Metal Bell Ring, nickel plating ................................................................................ $18.99 #103.1S Metal Bell Ring, silver plating ................................................................................ $24.69 Metal bell rings must be shrunk onto a bell using special shrinking dies.

2

WHISPER KEY LOCKS *Please see our Bassoon Accessory Price List for Whisper Key Lock prices

Left Hand Whisper Key Lock No. 159 Left Hand Lock Kit, nickel or silver ....................................................................... * The kit includes a plated key, posts, arbor, spring, screws and whisper key tab. Installation requires keymaking skills. No. 159.1 Spring for Left Hand Whisper Key Lock, black oxide plated ................................. $2.60 No. 159.5 Casting for Left Hand Whisper Key Lock ............................................................... $18.10

Right Hand Whisper Key Lock Type I, (plunger style) No. 161-I Right Hand Whisper Key Lock, nickel or silver ..................................................... * No. 161.3 Handle only, for Type I Lock, nickel or silver ........................................................ $16.37 No. 161.5 Handle & Pin, for Type I Lock, nickel or silver ...................................................... $40.16 Type II (slide style) No. 161-II Right Hand Whisper Key Lock, slide style, nickel or silver ................................... * Slide Spring ............................................................................................................ $2.93 Slide & Handle Assembly, nickel or silver ............................................................. $28.00 Type II (rotary style) No. 161-III Right Hand Whisper Key Lock, rotary style, nickel or silver ................................. * Shoulder Screw, nickel or silver ............................................................................. $21.45

BODY SCREWS Guard Screws 0810.1x250 Guard Screws (#1x5/16" O.H. Wood Screw) ............................................. per each $0.63 ................................................................................................................. per dozen $6.26 ..................................................................................................................... per 100 $52.20 ................................................................................................................... per 1000 $522.00 The #1 wood screws are the used for all guards except where a metal band is involved, such as for a right hand whisper key lock.

Post Locking Screws 0800.465 Post Locking Screws ............................................................................... per dozen $4.82 ..................................................................................................................... per 100 $40.20 ................................................................................................................... per 1000 $402.00 Standard post locking screws are used both for locking posts and for attaching right hand whisper key locks to the boot band. The thread size is 0.082" x 40tpi 0800.75 Long Post Locking Screws ..................................................................... per dozen $4.82 The long post locking screws are used for attaching the plate mounted neck strap rings to the boot band. The thread size is 0.082" x 40tpi

BOCAL PARTS No. 61.1 Bocal Button ........................................................................................................... $4.50 No. 61.2B Bocal Ring, brass .................................................................................................... $2.10 No. 61.2N Bocal Ring, nickel silver ......................................................................................... $3.48 No. 93 Bocal socket for Wing Joint .................................................................................... $37.28 No. 947.5 Bocal ring for Contrabassoon Bocal, brass ............................................................. $3.58

BOOT CAPS No. 81N Boot Cap, nickel plated ........................................................................................... $138.00 No. 81S Boot Cap, silver plated ............................................................................................ $150.00 Note: Boot caps on older Fox instruments were inconsistent in size. If a new cap does not fit an older bassoon return it with the boot and we will make a cap to fit. No. 81.2 End Casting for boot cap ........................................................................................ $29.92 Hint: Many damaged caps can be fixed up by removing the old end casting, repairing the band and installing a new casting.

3

U-TUBES AND RELATED PARTS No. 79S U-tube, student models ........................................................................................... $47.57 No. 79P U-tube, Professional models ................................................................................... $129.40 The U-tube plate on both student and professional U-tubes is provided oversize and will need to be trimmed to fit the individual instrument. If informed in advance we can stamp a serial number on the U-tube plate. No. 79.1S U-tube, unmounted, student models ....................................................................... $31.72 No. 79.1P U-tube, unmounted, professional models ................................................................ $113.54 The unmounted u-tube is the tube itself without a plate. No. 77.1 U-tube Stud, for wood instruments ......................................................................... $3.06 No. 77.2 U-tube Nut, standard type ....................................................................................... $3.60 No. 77.3 U-tube Nut, tall knurled type ............................................................................ ...... $7.90 No. 77.4 U-tube Stud, for plastic models, brass .................................................................... $2.44 All Fox U-Tubes studs and nuts use #10-24 thread. Studs for wood instruments are silver soldered to the underside of the end plate. Studs for plastic instruments are threaded directly into the end of the boot.

SPRINGS Wire Springs 0340.[dia] Bassoon Spring Wire .................................................................................. per foot

Bassoon Sizes: .024", .031", .035", .039", .045" $0.60

8810.060 Set of Wire Springs for Bassoon ............................................................................. Includes: 7 - .024" x 2" 7 - .031" x 2" 4 - .035" x 2" 3 - .039" x 2" 5 - .045" x 2"

$2.60

No. 148 Spring Staking Screw .............................................................................................. $1.34 No. 163AS Extra Short Spring Hook ......................................................................................... $0.67 No. 163A Short Spring Hook .................................................................................................. $0.67 No. 163B Medium Spring Hook ............................................................................................. $0.67 No. 163C Long Spring Hook .................................................................................................. $0.96

Flat Springs No. 106 Flat Spring, .020" x 1.685", beryllium copper ........................................................ $0.37 No. 107 Flat Spring, .009" x 1.125", beryllium copper ........................................................ $0.37 No. 110 Flat Spring, .012" x 1.685", beryllium copper. ........................................................ $0.37 No. 111 Flat Spring, .012" x 1.125", beryllium copper ........................................................ $0.37 No. 112 Flat Spring with 2-holes, (Whisper key) beryllium copper ...................................... $4.70 No. 368A Standard Flat Spring Screws, #0-80 Thread ........................................................... $0.53 No. 375 Long Flat Spring Screws, #0-80 Thread ................................................................. $0.55 No. 147 Flat Spring Bearings ............................................................................................... $2.40 8810.050 Set of Bassoon Flat Springs ....................................................................................

Includes: 5 - #105, .016" x 1.685" 1 - #107, .009" x 1.125" 1 - #110, .012" x 1.685" 1 - #111, .012" x 1.125" 1 - #112, 2-hole

$5.31

KEY ROLLERS All of our rollers are made from 3/16" black delrin. Rollers and arbors are supplied long and must be shortened to fit the key. Roller arbors use #1-64 thread.

Standard Rollers 8700.1 Standard Roller & Arbor .......................................................................................... $3.12 No. 129B Standard Roller, only, .760" LOA............................................................................ $2.02 No. 113B Arbor only, for Standard Roller, .081"dia x .875" LOA .......................................... $1.10

Oval Rollers We do not supply “oval” rollers pre-shaped. Oval rollers must be made from standard rollers to fit the key at hand. Hint: Hold the roller on a tapered mandrel chucked in a bench motor while filing it to shape.

4

Endless Rollers “Endless” rollers are no longer used on a regular basis in spatulas. They are supplied as replacements. They can also be fitted to existing roller keys for customers who desire them. 8781.1 Endless Roller & Arbor .......................................................................................... $6.54 No. 130A Endless Roller, only, .750" LOA ............................................................................ $0.89 No. 114B Arbor for Endless Roller, only, 1/8" dia x .875" LOA ............................................ $5.65 No. 130D .200" Endless Roller for High A Bridge .................................................................... $1.25 No. 114.312 Endless Roller Arbor for High A Bridge ................................................................. $17.57 No. 129.5A Endless Roller, .375" for contrabassoon side roller ................................................. $1.31 No. 113G Endless Roller Arbor, 1/8" x 1/2", for contrabassoon side roller ............................. $3.77 "Endless" rollers are supported only at the threaded end of the arbor.

HINGE SCREWS Pivot Screws, #6-32 thread Fox bassoons use two different pivot screws. Although the thread size is the same, the tips are different and the two types are not interchangeable. A key fitted to the #131B pivot will have a pivot socket much too large for the #131 pivot. A key fitted to the #131 pivot will be too small for the #131B pivot. No. 131 Stainless Steel Pivot, old style, 19° tip taper ........................................................... $1.17

The no. 131 pivot screw is currently used on all plastic models. Prior to 1991 it was used on all models. Note the abrupt beginning of the threads.

No. 131B Stainless Steel Pivot Screw, new style, 25° tip taper ............................................... $1.01

The no. 131B pivot screw is currently used on all wood bassoon models and contras. This pivot was first made in 1991. Before that time all instruments used the #131 pivot. Note the taper continuing over the initial threads.

No. 131.3 Delrin Pivot (this uses the same design as the #131 pivot) ..................................... $2.28 Delrin pivots are much quieter than steel but will break. Hint: To remove a delrin pivot when the head breaks heat up the tip of a screwdriver and melt a slot into the pivot.

Hinge Arbors (Threaded hinge rods) Hinge arbors are available in both stainless steel and nickel silver, although not all arbors are available in both materials. Steel arbors are used in student models. They are more durable and easier to straighten when they are bent. Nickel silver arbors are used in professional models. They are quieter but can be difficult to straighten when bent. No. 135 Arbor, .093" x 1 1/4", #2-56 thread .................................................................. steel $2.84 No. 135NS Arbor, .093" x 1 1/4", #2-56 thread ..................................................... nickel silver $3.85 No. 137 Arbor, .093" x 1 3/4", #2-56 thread .................................................................. steel $3.48 No. 137NS Arbor, .093" x 1 3/4", #2-56 thread ..................................................... nickel silver $4.33 No. 139 Arbor, .093" x 2 1/4", #2-56 thread .................................................................. steel $3.78 No. 139NS Arbor, .093" x 2 1/4", #2-56 thread ..................................................... nickel silver $5.35 No. 141 Arbor, .093" x 2.815", #2-56 thread ................................................................. steel $4.28 No. 141NS Arbor, .093" x 2.815", #2-56 thread .................................................... nickel silver $4.58 No. 142 Arbor, .093" X 3", #2-56 thread ....................................................................... steel $4.21 No. 142NS Arbor, .093" X 3", #2-56 thread .......................................................... nickel silver $3.20 No. 143 Arbor, .093" x 3 5/8", #2-56 thread (High E Arbor) ......................................... steel $5.14 No. 143NS Arbor, .093" x 3 5/8", #2-56 thread (High E Arbor) ............................ nickel silver $4.58 No. 144 Arbor, .093" x 3 1/4" w/pivot, #2-56 thread.(A/B Arbor) ............................. steel $10.58 No. 29.113 Arbor, 1/8" x 1 5/8", w/pivot, #4-48 thread ......................................... nickel silver $9.44 8810.010 Set of Bassoon Hinge Arbors ...................................................................................

Includes: 10 - #135, 1 1/4" 7 - #137, 1 3/4" 3 - #139, 2 1/4" 1 - #141, 2 3/4" 1 - #143, 3 5/8" 1 - #29.113, 1/8" pivot arbor

$82.96

5

TONE HOLE LINERS Tuning of new tone hole liners is necessary following installation.

Straight Tubes: No. 3L High D Vent, nickel silver ...................................................................................... $2.54 No. 3LT Special High D Vent Liner for Thick Wall Models ................................................ $12.68 No. 5L High C Vent, nickel silver ....................................................................................... $2.54 No. 5LT Special High C Vent Liner, for Thick Wall Models ............................................... $12.68 No. 7L High A Vent, nickel silver ....................................................................................... $1.59 No. 7LT Special High A Vent Liner, for Thick Wall Models ............................................... $12.68 No. 11L F Tone Hole, nickel silver ........................................................................................ $14.88 No. 13L E Tone Hole, nickel silver........................................................................................ $17.40 No. 15L D Tone Hole, nickel silver ....................................................................................... $15.60 No. 19LR C Tone Hole Liner, hard rubber ............................................................................. $13.03 No. 25L High G Vent, nickel silver ....................................................................................... $9.60 No. 27L B Tone Hole, nickel silver ....................................................................................... $12.60 Straight tubes are installed in drilled holes; they are usually secured in place with epoxy.

Tapered Tubes: No. 11FL Tapered F Tone Hole, nickel silver .......................................................................... $16.20 No. 13EL Tapered E Tone Hole, nickel silver .......................................................................... $17.10 No. 15DL Tapered D Tone Hole, nickel silver ......................................................................... $16.50 No. 23CL Tapered C Tone Hole, nickel silver ......................................................................... $17.10 Tapered tubes are installed in sockets that have been reamed to match the taper of the tube. The proper tool is a metric taper pin reamer which has a taper of 1:50.

TENONS & SOCKETS Tenon Wrapping Thread 8090.1 Tenon Wrapping Thread, cotton, 10g ball (approx. 80m) $6.45 Tenon wrapping thread should be either cotton or linen. Never use a polyester thread. The strength and elasticity of polyester thread can squeeze a bass joint tenon, shrinking the bore.

Bass Joint Tenons 8705.0 Maple Bass Tenon, boot end ................................................................................... $14.50 8706.0 Maple Bass Tenon, bell end .................................................................................... $14.50 Replacement bass tenons come from regular production joints with defects that make the rest of the joint unusable.

Wing Joint Tenons Replacement wing joint tenons for wood instruments are not available. No. 97 Brass Wing Tenon Cap ........................................................................................... $8.53 No. 99 Brass Boot Joint Socket Liner (for wing tenon) ...................................................... $23.00 The no. 99 boot socket liner is supplied unfinished must be machined to fit.

Replacement Tenons for Polypropylene Bassoons Plastic Wing Tenon (reamed, to be machined by buyer) ......................................... $14.50 Plastic bass joint tenons .......................................................................................... NOT AVAILABLE

Plastic wing tenon replacement requires a special procedure. There is no adhesive that will bond to polypropylene. Any attempt to glue in a tenon in the same manner as would be done with a wood tenon will fail. The trick is to use the thermal expansion factor of the plastic. Cut a counterbore in the wing about 1.5" deep. Machine the replacement tenon about .005" larger than the diameter of the counterbore. Cool the tenon in a freezer for couple hours and warm the wing in hot water. The tenon will shrink while the counterbore expands and the parts can be joined. Work Fast! Be sure to replace the C insert, ream and polish the bore to the final size.

This system of tenon replacement works well for wings but does not work for bass joints. The thinner wall and shorter counterbore used on bass joints doesn’t hold as well.

6

POSTS Specify nickel or silver plating. All posts for bassoon and contrabassoon use #10-24 thread. For use on bass joints, nos. 115, 117 and 118 posts are also available with “short threads”. The price for short thread posts is the same as the regular posts. The short threads, along with a matching post hole depth, reduces penetration into the bass joint bore by the posts.

Hinge Posts No. 115 5mm post, nickel or silver ....................................................................................... $2.09 No. 117 6mm post, nickel or silver ........................................................................................ $2.14 No. 118 7mm post, nickel or silver ........................................................................................ $2.18 No. 119 11mm post, standard shape, nickel or silver ............................................................ $2.48 No. 119A 11mm, milkbottle shape, nickel or silver ................................................................. $3.01 No. 121 Double post, nickel or silver .................................................................................... $2.86 The indicated sizes are the approximate distance from surface of body to center of ball.

Guide Posts & Stop Posts No. 151A Guide Post, .156" slot x .495"LOA, nickel or silver ................................................

Used with bass and bell joints lever keys. $2.88

No. 151B Guide Post, .141" slot x .516"LOA, nickel or silver ................................................ Used with wing joint lever keys

$2.77

No. 151C Guide Post, .141" slot x .656"LOA, nickel or silver ................................................ Used with wing C lever

$3.30

No. 133C Stop post, 19/32"LOA, nickel or silver ................................................................... $2.20 No. 133E Stop post, 21/32"LOA, nickel or silver ................................................................... $2.20 No. 133G Stop post, 23/32"LOA, nickel or silver ................................................................... $2.20 No. 133H Stop post, 25/32"LOA, nickel or silver ................................................................... $7.10 No. 133I Stop post, 28/32"LOA, nickel or silver ................................................................... $3.44

PAD CUPS Machined pad cups have sharp corners at the perimeter of the cup. They are used on professional model bassoons. Stamped pad cups have rounded corners at the perimeters of the cup. They are used on all student models and older Fox long bore professional models. The size indicated is the pad size for that cup. Stamped Machined No. 1 10mm $3.79 No. 1B 10mm $4.61 No. 2 11.5mm $2.11 No. 2B 12mm $5.52 No. 2R 12mm $2.17 No. 3B 14mm $12.10 No. 3 13.5mm $3.07 No. 3.5B 17mm $10.16 No. 4 21mm $4.45 No. 4B 21mm $14.39 No. 5 24mm $3.20 No. 5B 24mm $11.29 No. 6 27mm $3.88 No. 5.5B 25.5mm $13.94 No. 7 17mm $4.88 No. 6B 27mm $21.21 No. 8 25.5mm $5.12 No. 14B 33mm $15.84 No. 1-OVL Oval 10.52

7

CONTRABASSOON PARTS The parts for listed below are uniquely for contrabassoon. In addition, contrabassoon uses many other parts used on bassoon, including guard screws, pivot screws and hinge arbors, posts, etc. Contrabassoon “borrows” as much as possible from bassoon. Many parts used on Fox contras will be found listed among the bassoon parts.

Contrabassoon Guards No. 930 Right Hand Thumb Guard, silver or nickel ............................................................. $36.00 No. 930.1 Special Right Thumb Guard, silver or nickel (better with rollers) ........................... $36.00 No. 932 Contra Right Hand Palm Guard, silver or nickel .................................................... $60.00 No. 936 G Tone Hole Guard. silver or nickel ....................................................................... $36.00 No. 946 Thigh Guard, silver or nickel .................................................................................. $45.00 No. 950 Contra Adjustable Left Hand Support, complete ,silver or nickel .......................... $110.00 No. 950A Contra Adjustable Left Hand Support, Handrest only, silver or nickel ................... $60.00 No. 950B Contra Adjustable Left Hand Support, Bracket only, silver or nickel ..................... $60.00 No. 980 Contra Neck Strap Ring, silver or nickel ................................................................ $78.00

Contrabassoon End Pin No. 942C Contrabassoon End Pin ........................................................................................... $21.60 No. 942C.13 Rubber Crutch Tip for Contrabassoon End Pin ...................................................... $1.52 No. 942C.3 Contrabassoon End Pin Thumb Screw ..................................................................... $19.22 3068.0 Casting for contrabassoon end pin bracket, unfinished ........................................... $8.91 No. 942C.2 Casting for contrabassoon end pin bracket, bored, drilled & tapped ...................... $89.19

Contrabassoon Body Screws 0810.4x312 #4 x 5/16" O.H. Wood Screws (contra only) ........................................... per dozen $0.72 0810.4x625 #4 x 5/8" O.H. Wood Screws (contra only) ............................................. per dozen $3.12 The #4 wood screws are used only on contrabassoons.

Contrabassoon Water Key Spring No. 900W.4 Contrabassoon Water Key Spring ........................................................................... $2.00

Contrabassoon Posts No. 984 15mm post (contra only) , nickel or silver ............................................................... $11.17 No. 985 22mm post (contra only) , nickel or silver ............................................................... $11.34 The indicated sizes are the approximate distance from surface of body to center of ball.

Contrabassoon Key parts A listing of contrabassoon key parts is not published at this time. For price and availability information for key parts and any other unlisted contrabassoon parts please contact the factory directly.

8

BASSOON KEY PARTS

Replacement Keys Ready made keys are not available. Keywork on all Fox and Renard instruments are handmade for the individual instrument. To obtain replacement keys please return the instrument to us to have a new key made. Alternatively, the parts can be supplied to you so that you can make the key.

STANDARD KEYS No. 1P Whisper Key Pad Section #1.101 Pad Cup & Arm Assembly .......................................................... $18.53 #1.103/#1.104 Offset Arms (2-required) ............................................................. $4.00 #1.106 Camelback Extension Arm .......................................................... $7.48 No. 1S Whisper Key, Spatula Section #1.107 Whisper Key Spatula ................................................................... $11.86 #1.110 Whisper Key Lift Arm................................................................. $4.00 No. 1B Whisper Key Bridge Section #1.111 Bridge Key Upper Arm ............................................................... $4.00 #1.113 Bridge Key Lower Arm (to boot) ................................................ $6.64 No. 3 High D Key #3.102 High D Lever .............................................................................. $57.53 No. 5 High C Key (with high D key) #5.102A High C Lever ............................................................................... $44.06 No. 5 High C Key (without high D key) #5.102 High C Lever ............................................................................... $45.37 No. 7 High A Key #7.102 High A Lever............................................................................... $38.90 No. 9 E/F' Trill Key #9.102 E/F' Trill Cup Arm ..................................................................... $5.80 #9.105 E/F' Trill Spatula, for plastic models ......................................... $9.43 #9.105A E/F' Trill Spatula, for wood models ........................................... $7.48 No. 15 Ring Key/Plateau Key #15.104P Ring Key for D Tone Hole, plastic bodies .................................. $8.71 #15.104W Ring Key for D Tone Hole, wood bodies .................................... $16.36 #15.101 Lift Arm ..................................................................................... $4.00 #15.105 Plateau Key ................................................................................. $10.96 No. 17S Two-Prong Key #17.101 Contact Arm for High C .............................................................. $7.95 #17.104 Contact Arm for C ..................................................................... $7.95 #17.105 Connecting Arm .......................................................................... $4.00 No. 17P E( Vent Key #17.106 Double Connecting Arm ............................................................. $4.00 #17.108 E( Vent Cup Arm ........................................................................ $5.77

No. 19 C' Key #19.102 C' Lever ...................................................................................... $44.24

No. 21 C' Trill Key #21.102 C' Trill Key Spatula/Cup Arm .................................................... $13.83 No. 25 High G Ring Key #25.101 High G Cup Arm ......................................................................... $7.00 #25.103 Connecting Arm .......................................................................... $4.00 #27.101LB Ring Key for B Tone Hole, long bore models ............................. $20.62 #27.101SB Ring Key for B Tone Hole, short bore & thick wall models $18.36 No. 29S B( Spatula Key #29.101 B( Spatula ................................................................................... $11.20 #29.104 Lift Arm ...................................................................................... $9.42

9

No. 29P B( Pad Key #29.107 B( Pin Arm .................................................................................. $8.79 #29.108 B Cup Arm ................................................................................ $7.54

No. 29T B( Trill Key #29.111 B( Trill Key ................................................................................. $19.05 No. 31S G Key #31.101 G Spatula ..................................................................................... $22.05 #31.103 G Pin Arm ................................................................................... $8.73 No. 31P G Pad #31.105 G Key Cup Arm (for A tone hole) ............................................... $10.15 No. 33 Little Finger G' Key #33.103 L.F. G' Roller Spatula ................................................................ $41.06 #33.105 L.F. G' Cup Arm ........................................................................ $8.24

No. 35 Thumb G' Key #35.101 Thumb G' Spatula....................................................................... $10.07 #35.103 Thumb G' Cup Arm, Long Bore Models .................................... $13.18 #35.103A Thumb G' Cup Arm, Short Bore Models ................................... $19.78 No. 37S Low F Spatula #37.103 Low F Roller Spatula .................................................................. $46.63 #37.105 Low F Pin Arm ........................................................................... $8.37 No. 37P Low F Pad #37.108 Low F Cup Arm (for G tone hole)............................................... $5.93 No. 39 Little Finger F' Key #39.101 Little Finger F' Spatula ..............................................................

Roller spatulas for this key are not available. The roller is installed in the regular spatula after the key is made.

$11.92

#39.101B Little Finger F' Spatula ............................................................... $14.23 The #39.101B is used for rollers. The contact area is thicker for roller

installation. The roller must be installed after the key is made.

#39.104 L.F. F' Cup Arm ......................................................................... $6.92

No. 41 Thumb F' Key #41.101 Thumb F' Spatula ....................................................................... $10.01 #41.103 Thumb F' Cup Arm .................................................................... $8.42

No. 41R F' Rocker #37.111 F' Rocker Arm To Pad Cup ........................................................ $8.66 #37.114 F' Rocker Pin Arm...................................................................... $7.65 No. 43 Pancake Key (Low E Key) #43.101 Upper Arm .................................................................................. $4.00 #43.103 Pancake Key Spatula ................................................................... $17.08 No. 45S Low D Key #45.102 Low D Lever ............................................................................... $33.48 #45.101A Low C to D Connector ................................................................ $4.68 No. 45P Low D Pad #45.105 Low D Cup Arm .......................................................................... $14.36 No. 47 Low E( Key #47.103 Low E( Cup Arm ......................................................................... $4.42 #47.105 Low E( Roller Spatula................................................................. $58.12 No. 49 Low C Key #49.102 Low C Lever ............................................................................... $33.25 No. 51P Low C' Pad #51.102 Low C' Cup Arm ........................................................................ $4.00 #51.104 Lower Connector ......................................................................... $4.00 No. 51S Low C' Spatula #51.105 Lift Arm ...................................................................................... $4.00 #51.107 Low C' Roller Spatula ................................................................ $56.29

10

No. 53P Low B Pad #53.102 Low B Cup Arm .......................................................................... $5.89 #53.104 Low B Connector ........................................................................ $4.00 No. 53S Low B Key #53.105 Low B Lever ............................................................................... $64.20 No. 55S Low B( Key #55.105 Low B( Lever .............................................................................. $91.69

No. 55P Low B( Pad (Bell Key) #55.102 Low B( Bell Key ......................................................................... $30.46

SPECIAL ROLLER SPATULAS WING JOINT ROLLER KEYS FOR LEFT THUMB #1.107A Whisper Key Roller Spatula ........................................................ $29.90 #19.102A C' Lever with Roller ................................................................... $60.91 BOOT JOINT ROLLER KEYS FOR RIGHT THUMB B( Roller Spatulas #29.101A B( Roller Spatula ........................................................................

(With longer roller to match roller pancake key) $36.44

#29.101B B( Roller Spatula ........................................................................ With shorter roller to match pancake key plate

$40.36

Pancake Key Roller Spatulas #43.103A Pancake Key with roller to F' ................................................... $36.12 #43.103B Pancake Key with two rollers ...................................................... $58.61 #43.103C Pancake Key with roller to B( ................................................... $34.22 Thumb F' Roller Spatulas #41.101A F' Spatula with two rollers ......................................................... $56.92 #41.101B F' Spatula with single roller ......................................................

For use with E plate or with plain low E. $36.24

#41.101C F' Spatula with Single Roller .................................................... For with pancake key with roller.

$34.69

#41.101T F' Spatula with two rollers, for thick wall models ...................... For use with #35.101T Thumb G Roller Spatula

$44.84

Thumb G' Roller Spatulas #35.101A Thumb G' Spatula with single roller........................................... $32.32 #35.101T Thumb G' Spatula with single roller, for thick wall ...................

For use with #41.101T F Double Roller Spatula $33.62

DOUBLE WIDE LITTLE FINGER F' ROLLER SPATULA #39.101A Double Wide L.F. F' Spatula w/o roller ..................................... $11.68 It is much easier and will yield better results to mount the spatula first

and install the roller later.

#39.101AR Double Wide L.F. F' Roller Spatula, roller installed .................. $33.97 #33.103A G' Roller Spatula for Wide L.F. F' ...........................................

This must be used with the double wide L.F. F. $47.72

BASS JOINT ROLLER KEYS FOR LEFT THUMB #45.102A Low D Spatula with roller ........................................................... $55.56 #49.102A Low C Spatula with roller ........................................................... $52.18 SPECIAL LITTLE FINGER SPATULAS WITH OVAL ROLLERS #33.103BR L.F. G' Spatula with oval roller .................................................. $55.41 #33.103TBR L.F. G' Spatula with oval roller, for thick wall models ............. $55.41 #37.103BR Low F Spatula with oval roller .................................................... $62.97 #47.105BR Low E( Spatula with oval roller .................................................. $57.02 #51.107BR Low C' Spatula with oval roller.................................................. $56.29

SPECIAL KEYS Whisper Key #1.101O Oval Whisper Key Pad Cup & Arm ............................................ $23.53

11

#1.112 Little Finger Whisper Key Spatula .............................................. The remaining connecting linkages for the little finger whisper key are not available.

$8.13

High A Bridge to Whisper Key with roller Set of parts to add High A Bridge with roller ............................. $33.39 The set includes the following parts:

1 - #1.105R High A Bridge Arm 1 - #1.105A Roller Bracket for High A Bridge 1 - #114.312 Endless Roller Arbor for High A Bridge 1 - #130D .200” Endless Roller for High A Bridge

No. 8 Standard High E Key #8.100 High E Link to E/F' Trill ............................................................ $12.57 #8.105A High E Spatula ............................................................................ $11.50 #8.105T High E Spatula, for Thick Wall Models ......................................

The touch area is longer than the normal #8.105A. $13.82

#9.102 High E Cup Arm (same as std E/F' trill pad arm) ....................... $5.80 No. 8 Offset High E Key #8.105 Offset High E Spatula (2-required) ............................................. $8.83 #9.102B Offset High E Cup Arm (2-required) .......................................... $12.33 #9.102C Offset High E Link ...................................................................... $8.44 #8.105B Special Spatula for Double High E or High F ............................. $8.77 No. 16 E( Trill Key (Left Hand) #16.101 E( Trill Key Spatula .................................................................... $10.96 #16.104 E( Trill Cup Arm ......................................................................... $6.21

No. 16R Right Hand E( Trill #16.104 E( Trill Cup Arm (same as L.H.) ................................................. $6.21 #16.106 R.H. E( Trill Upper Bridge Link ................................................. $11.50 #16.107 R.H. E( Trill Lower Bridge Link ................................................. $10.61 #16.108 R.H. E( Trill Spatula ................................................................... $13.28 #16.109 Clutch for Double E( Trill ...........................................................

This is supplied as a single piece which must be cut in half and notched to carry the action around a central post connecting the R.H. mechanism to the standard L.H. E Trill.

$8.53

Offset C' Trill #21.102A Offset C' Trill Spatula ................................................................ $13.10

No. 30 A(/B( Trill Key #30.100 A(/B( Trill Spatula ...................................................................... $10.61 #30.200 Arm to lift B( Pad ...................................................................... $10.37 #30.300 Connecting Arm from spatula (use #25.103) ............................. #30.400 Connecting Arm from pad ........................................................... $6.75 #30.500 Cup Arm, straight (use #33.105) ................................................ #30.600 Cup Arm, angled, for thick wall models .................................... $12.08 Pancake Key with Crown #43.5 Pancake Key Plate ....................................................................... $6.40 #43.103D Pancake Key Spatula with flat top .............................................. $19.82 Low C Extension #49.102B Low C Extension ......................................................................... $8.83 Special Keys for Single Hole G' System used on Thick Wall models #31.105B Cup Arm for A Tone Hole .......................................................... $14.19 #33.107B Pin Arm for L.F. G', (use 31.103) ............................................. #35.105B Connecting Arm from Thumb G' Spatula ................................... $9.79 #35.106B G' Rocker ................................................................................... $15.55 #35.106C Special G' Rocker Arm for instruments with A(/B( trill ............. $15.15 #35.105C Special G' Arm for instruments with A(/B( trill ......................... $9.43 Auxiliary Low C# Spatula for left thumb #51.110 Auxiliary Low C' Spatula for left thumb .................................... $10.67

12

OBOE & ENGLISH HORN PARTS

Pivot Screw No. 363 Pivot Screw, for Oboe and English Horn, #2-64 thread ......................................... $0.72

Adjusting Screws #317 Adjusting Screw with teflon tip, #1-72 thread ....................................................... $2.69 #317X Adjusting Screws without teflon, #1-72 thread ...................................................... $0.98 #319 Adjusting Screw Lug, #1-72 thread ....................................................................... $0.71 0900.039 Teflon, 1mm dia ......................................................................................... per foot $0.80

Pinning (clutch) Screw #369 Pinning Screw, for pinned key assemblies , 1.2 x .25mm thread ............................ $0.85

Thumb Rests * Please see our Oboe & English Horn Accessory Price List for Thumb Rest prices. No. 376 Thumb Rest, silverplated, for oboe or English horn .............................................. * No. 376R Thumb Rest, with ring, silverplated, for oboe or English horn .............................. * No. 378 Adjustable Thumb Rest, for oboe or English horn ................................................. *

Reed Receivers No. 321 Oboe Reed Receiver .............................................................................................. $11.92 No. 595 English Horn Reed Receiver .................................................................................. $4.11

Bell Rings No. 336 Bell Ring, silver plated .......................................................................................... $13.36 No. 596 English Horn Bell Ring .......................................................................................... $24.00

Arbors No. 351M Oboe Arbor, .082"dia x .490"LOA, #1-64 thread .................................................. $3.26 No. 351N Oboe Arbor, .082"dia x .550"LOA, #1-64 thread .................................................. $2.90 No. 351P Oboe Arbor, .082"dia x .570"LOA, #1-64 thread .................................................. $4.09 No. 351Q Oboe Arbor, .082"dia x .600"LOA, #1-64 thread .................................................. $2.72 No. 351R Oboe Arbor, .082"dia x .655"LOA, #1-64 thread .................................................. $2.72 No. 351S Oboe Arbor, .082"dia x .695"LOA, #1-64 thread .................................................. $2.73 No. 351T Oboe Arbor, .082"dia x .745"LOA, #1-64 thread .................................................. $3.10 No. 351U Oboe Arbor, .082"dia x .870"LOA, #1-64 thread .................................................. $3.79 No. 352A Oboe Arbor, .093"dia x 1.210"LOA, #2-56 thread ................................................. $4.32 No. 352B Oboe Arbor, .093"dia x 1.320"LOA, #2-56 thread ................................................. $3.82 No. 352C Oboe Arbor, .093"dia x 1.730"LOA, #2-56 thread ................................................. $4.07 No. 352D Oboe Arbor, .093"dia x 1.040"LOA, #2-56 thread ................................................. $2.64 No. 352E Oboe Arbor, .093"dia x 1.270"LOA, #2-56 thread ................................................. $3.32 No. 352F Oboe Arbor, .093"dia x 1.660"LOA, #2-56 thread ................................................. $3.73 No. 352G Oboe Arbor, .093"dia x 2.920"LOA, #2-56 thread ................................................. $3.43 No. 352H Oboe Arbor, .093"dia x 4.550"LOA, #2-56 thread ................................................. $4.27 No. 352I Oboe Arbor, .093"dia x 4.730"LOA, #2-56 thread ................................................. $3.27 No. 353A Oboe Pivot Arbor, .093"dia x 2.205"LOA, #2-56 thread........................................ $5.74 No. 353B Oboe Pivot Arbor, .093"dia x 2.740"LOA, #2-56 thread........................................ $6.40 No. 365A Plain Shaft for Pinned Key Assembly, .093"dia x 7.090"LOA, ............................. $7.66 No. 365A-DT No. 365A, drilled and tapped ................................................................................. $51.66 No. 365B Plain Shaft for Pinned Key Assembly, .093"dia x 4.830"LOA ............................... $5.96 No. 365B-DT No. 365B, drilled and tapped ................................................................................. $49.82 No. 365C Plain Shaft for Pinned Key Assembly, .093"dia x 3.110"LOA ............................... $3.81 No. 365C-DT No. 365C, drilled and tapped ................................................................................. $49.64 No. 365D Plain Shaft for Pinned Key Assembly, .093"dia x 3.400"LOA ............................... $4.27 No. 365D-DT No. 365D, drilled and tapped ................................................................................. $49.64

Springs No. 360 .004" x 1 1/8" Oboe Flat Spring ............................................................................. $1.03 No. 361 .010" x 1 1/8" Oboe Flat Spring ............................................................................. $1.26 No. 362 .008" x 1 1/2" Oboe Flat Spring, for E key ........................................................... $1.73 No. 560 .006" x 25mm English Horn Flat Spring $4.91 No. 368A Standard Flat Spring Screw, #0-80 thread ............................................................. $0.53

13

No. 375 Long Flat Spring Screw, #0-80 thread .................................................................... $0.55 0340.[dia] Oboe Spring Wire ....................................................................................... per foot

Oboe Sizes: .016", .018", .020", .022", .024", .029," $0.60

No. 163AS Extra Short Spring Hook ......................................................................................... $0.67 No. 163A Short Spring Hook .................................................................................................. $0.67 No. 163B Medium Spring Hook ............................................................................................. $0.67 No. 163C Long Spring Hook .................................................................................................. $0.96

Vents Vent wells and Vent Caps are the same for both oboe and English horn. Please note that the vent caps do not come sized. For the oboe’s upper vent drill the hole in the cap out to .025" (#70 drill). For the oboe’s lower vent drill the hole in the cap out to .026" (#71 drill). For English horn both caps must be drilled out to .033" (#66 drill). No. 323 Vent Well ............................................................................................................... $3.60 No. 325 Vent Cap ................................................................................................................ $3.96

Tenon Sockets and Caps * Please see our Oboe & English Horn Accessory Price List for Cork Cap prices. No. 371 Oboe Lower Joint Tenon Socket Insert, nickel silver, for grenadilla joints ........... $37.20 No. 372 Oboe ell Tenon Socket Insert, nickel silver, for grenadilla joints .......................... $29.62 No. 373 Oboe Lower Joint Tenon Cap, nickel silver, for grenadilla joints .......................... $19.60 No. 374 Oboe Upper Joint Tenon Cap, nickel silver, for grenadilla joints ........................... $11.93 No. 366 Oboe Upper Joint Cork Cap, grenadilla, to protect cork tenons in case ................. $18.00 No. 367 Oboe Lower Joint Cork Cap, grenadilla, to protect cork tenons in case ................ $18.00 No. 1520 Oboe Cork Caps, Grenadilla, set of two ................................................................. * No. 571 English Horn Lower Joint Socket Insert, nickel silver, for grenadilla joints .......... $94.07 No. 571 English Horn Bell Socket Insert, nickel silver, for grenadilla joints ...................... $58.28 No. 573 English Horn Upper Joint Tenon Cap, nickel silver, for grenadilla joints ............. $28.72 No. 574 English Horn Lower Joint Tenon Cap, nickel silver, for grenadilla joints ............. $22.14 No. 566 English Horn Upper Joint Cork Cap, grenadilla, to protect cork tenons in case ..... $24.00 No. 567 English Horn Lower Joint Cork Cap, grenadilla to protect cork tenons in case...... $24.00 No. 1521 English Horn Cork Caps, grenadilla, set of two ..................................................... *

Bands (Socket Rings) No. 332 Oboe Lower Joint Band ......................................................................................... $5.10 No. 334 Oboe Bell Band ...................................................................................................... $5.10 No. 532 English Horn Lower Joint Band ............................................................................. $27.43 No. 534 English Horn Bell Band ......................................................................................... $32.06 No. 338 Band Strap ............................................................................................................. $3.38 0816.0X187 #0 x 3/16" F.H. Wood Screw for Band Straps ....................................................... $1.50

Posts, for Oboe and English Horn Oboe posts are available only in silver plating. The dimensions given are the approximate distances from the surface of the body to the center of the ball. Thread size is M3.7 x 1mm No. 331 2.5mm Post ............................................................................................................ $2.02 No. 335 3.5mm Post ............................................................................................................ $1.28 No. 337 4mm Post ............................................................................................................... $1.55 No. 546 4.5mm Post (English Horn only) ........................................................................... $2.47 No. 339 5mm Post ............................................................................................................... $1.34 No. 341 5.5mm Post ............................................................................................................ $1.71 No. 343 6mm Post ............................................................................................................... $1.10

Pad Cups Flat top series pad cups were used on all oboes made prior to 1999 and continue to be used on Renard models. No. 301 Flat Top Pad Cup, for Oboe, .275" OD .................................................................. $4.40 No. 303 Flat Top Pad Cup, for Oboe, .317" OD .................................................................. $4.40 No. 305 Flat Top Pad Cup, for Oboe, .364" OD .................................................................. $4.40 No. 307 Flat Top Pad Cup, for Oboe, .435" OD .................................................................. $4.94 No. 308 Flat Top Pad Cup, for Oboe,. 510" OD................................................................... $4.94 No. 309 Flat Top Pad Cup, for Oboe,. 560" OD .................................................................. $4.94 Rounded top pad cups were introduced on Fox oboe models and English horns since the summer of 1999. No. 577 Rounded Top Pad Cup for Pro Oboe and English Horn, .275" OD ....................... $2.89 No. 578 Rounded Top Pad Cup for Pro Oboe and English Horn, .310" OD ....................... $2.35 No. 579 Rounded Top Pad Cup for Pro Oboe and English Horn, .372" OD ....................... $2.53

14

No. 580 Rounded Top Pad Cup for English Horn, .420" OD .............................................. $6.62 No. 581 Rounded Top Pad Cup for Pro Oboe and English Horn, .455" OD ....................... $3.37 No. 582 Rounded Top Pad Cup for Pro Oboe and English Horn, .495" OD ....................... $3.50 No. 583 Rounded Top Pad Cup for English Horn, .540" OD .............................................. $6.75 No. 584 Rounded Top Pad Cup for Pro Oboe and English Horn, .560" OD ....................... $5.84 No. 585 Rounded Top Pad Cup for English Horn, .610" OD .............................................. $6.99 No. 586 Rounded Top Pad Cup for English Horn, .645" OD .............................................. $8.32 Pad cups for E keys, (third finger right hand) No. 312 Pad Cup, for Pro Oboe, .500" OD, for Split E, ..................................................... $7.08 No. 314 Ring, for Pro Oboe, .500" OD, for Split E ............................................................. $5.98 No. 316 Pad Cup, for Student Oboe, .500" OD for one piece E ........................................... $6.43 No. 529H Pad Cup, for Pro English Horn, .500" OD, for split E ...........................................

$34.12

No. 529I Ring, for Pro English Horn, .500" OD, for split E ................................................. $24.95 No. 529J Pad Cup, for Student English Horn, .500" OD, for one piece E ............................ $27.05

English Horn Key Parts. A listing of English horn key parts is not published at this time. For price and availability information for key parts and any other unlisted English horn parts please contact the factory directly.

15

OBOE KEY PARTS

Replacement Keys Ready made keys are not available. Keywork on all Fox and Renard instruments are handmade for the individual instrument. To obtain replacement keys please return the instrument to us to have a new key made. Alternatively, the parts can be supplied to you so that you can make the key.

No. 1A, Upper Octave Key #1A Oboe Key Part, with cup ............................................................ $17.38 #1B Oboe Key Part ............................................................................ $2.01 #1C Oboe Key Casting ...................................................................... $13.08 No. 3A, Lower Octave Pad Key #3A-R Oboe Key Part, with flat top cup & lug ...................................... $29.76 #3A-F Oboe Key Part, with round top cup & lug .................................. $29.95 No. 3B, Lower Octave Key Spatula #3B Oboe Key Part, with lug ............................................................. $12.55 #3C-R Oboe Key Casting ...................................................................... $15.60 #3C-F Oboe Key Casting (used with 3rd octave key) ............................ $17.60 No. 4A 3rd Octave Key #4A Oboe Key Part, with cup ............................................................ $7.66 #4B Oboe Key Casting ...................................................................... $17.60 No. 5A, Upper (D) Trill Pad #5A-R Oboe Key Part, with flat top cup ................................................ $12.89 #5A-F Oboe Key Part, with round top cup ............................................ $12.53 No. 5B, Component of Pinned Key Assembly #1: Upper Joint Trill Spatulas #5B Oboe Key Part ............................................................................ $2.30 No. 5C Key, Component of Pinned Key Assembly #1: Upper Joint Trill Spatulas #5C Oboe Key Casting ...................................................................... $10.99 No. 5D Key, Component of Pinned Key Assembly #1: Upper Joint Trill Spatulas #5D Oboe Key Part ............................................................................ $17.85 No. 5E, D Trill Spatula (Lower Joint) #5E Oboe Key Part ............................................................................ $12.68 #5F Oboe Key Casting ...................................................................... $11.83 No. 7A, Lower (C') Trill Pad #7A-R Oboe Key Part, with flat top cup ................................................ $12.89 #7A-F Oboe Key Part, with round top cup ............................................ $12.54 No. 7B, Component of Pinned Key Assembly #1: Upper Joint Trill Spatulas #7B Oboe Key Part ............................................................................ $2.30 #7C Oboe Key Part ............................................................................ $5.63 #7D Oboe Key Casting ...................................................................... $10.99 No. 9A, B Key #9A Oboe Pad Cup Key, w/ 9B tab ................................................... $29.89 #9C Oboe Key Part, with lug ............................................................. $16.32 No. 11A, C Key #11A-R Oboe Key Part, with flat top cup ................................................ $14.44 #11A-F Oboe Key Part, with round top cup ............................................ $14.08 #11B Oboe Key Casting ...................................................................... $5.89 #11C Oboe Key Part, w/ lugs .............................................................. $27.31 No. 13A, A Key #13A Oboe Pad Cup Key, w/ pin ......................................................... $17.59 #13B Oboe Key Part ............................................................................ $2.65 No. 13F, A(/B( Trill Connector, Lower Half Fox Models #13E Oboe Key Part ............................................................................ $1.89 #13F Oboe Key Part ............................................................................ $4.07 No. 13G, A(/B( Trill Connector, Upper Half, Fox Models #13D Oboe Key Part ............................................................................ $4.67 #13G Oboe Key Part ............................................................................ $3.20

16

No. 13D, A(/B( Trill Connector, Renard Models #13E Oboe Key Part ............................................................................ $1.89 #13D Oboe Key Part ............................................................................ $4.67 No. 15A, B( Key #15A-R Oboe Key Part, with flat top cup ................................................ $14.44 #15A-F Oboe Key Part, with round top cup ............................................ $14.08 #15C Oboe Key Part, with lug ............................................................. $13.58 #15D Oboe Key Part, with lug ............................................................. $11.09 No. 15E, Bridge Key #15E Oboe Key Part ............................................................................ $14.06 No. 17A, G Key #17A Oboe Pad Cup Key ..................................................................... $13.15 No. 17B, A(/B( Trill Spatula #17B Oboe Key Casting ...................................................................... $15.97 No. 19A, Forefinger G' Key #19A-R Oboe Key Part, with flat top cup ................................................ $11.86 #19A-F Oboe Key Part, with round top cup ............................................ $11.50 #19B Oboe Key Casting ...................................................................... $14.47 #19C Oboe Key Part ............................................................................ $1.87 No. 19D, Little Finger G' Key #19D Oboe Key Part ............................................................................ $2.83 #19E Oboe Key Casting ...................................................................... $11.65 No. 21A, F' Key #21A Oboe Pad Cup Key ..................................................................... $23.42 #21B Oboe Key Part, with lug ............................................................. $9.32 #21C Oboe Key Part ............................................................................ $8.22 #21D Oboe Key Part, F Tab ............................................................... $1.46 No. 23A, F Auxiliary Key #23A-R Oboe Key Part, with flat top cup ................................................ $14.09 #23A-F Oboe Key Part, with round top cup ............................................ $13.92 #23B Oboe Key Part, with lugs ............................................................ $14.61 No. 25A, E Key #25A Oboe Pad Cup Key ..................................................................... $11.95 #25B Oboe Key Part ............................................................................ $2.74 #25E Oboe Key Part ............................................................................ $1.85 #25F Oboe Key Part ............................................................................ $2.81 No. 27A, F Key #27A-R Oboe Key Part, with flat top cup ................................................ $13.57 #27A-F Oboe Key Part, with round top cup ............................................ $13.39 #27B Oboe Key Casting ...................................................................... $13.09 No. 27C, Side F Rocker Key #27C Oboe Key Part ............................................................................ $6.22 No. 27D, Side F Key #27D Oboe Key Casting ...................................................................... $23.41 No. 29A, D Key Renard Models #29A-R Oboe Key Part, with student cup ................................................. $20.73 #29E Oboe Key Part, with lug ............................................................. $9.93 #29F Oboe Key Part ............................................................................ $8.57 No. 29A, Split Ring Key, Bottom Half, Fox Models #29A-F Oboe Key Part, with pro cup ....................................................... $29.75 No. 29B, Split Ring Key, Top Half, Fox Models #29B Oboe Key Part, with pro ring ..................................................... $21.41 #29E Oboe Key Part, with lug ............................................................. $9.93 #29F Oboe Key Part ............................................................................ $8.57 No. 29D Key, Component of Pinned Key Assembly #3: Low B, B( & Alternate E( Keys #29D Oboe Key Part ............................................................................ $6.47 No. 31A, E( Pad Key #31A-R Oboe Key Part, with lug & flat top cup ...................................... $24.85 #31A-F Oboe Key Part, with lug & round top cup .................................. $24.98

17

No. 31B, E( Key, component of Pinned Assembly #2: E(/C' Keys #31B Oboe Key Part ............................................................................ $2.11 #31C Oboe Key Casting ...................................................................... $15.67 No. 33A, F Resonance Pad Key #33A-R Oboe Key Part, with flat top cup ................................................ $14.96 #33A-F Oboe Key Part, with round top cup ............................................ $14.79 No. 33B, F Resonance Rocker #33B Oboe Key Part, w/ lug ................................................................ $11.13 No. 35A, Low C Key #35A-R Oboe Key Part, with flat top cup ................................................ $15.51 #35A-F Oboe Key Part, with round top cup ............................................ $15.77 #35B Oboe Key Casting ...................................................................... $17.82 #35D Oboe Key Part ............................................................................ $1.92 No. 35E, C Auxiliary Lever (Banana Key) #35E Oboe Key Casting ...................................................................... $8.04 No. 37A, C' Pad Key, not for model 333 #37A-R Oboe Key Part, with flat top cup ................................................ $31.01 #37A-F Oboe Key Part, with round top cup ............................................ $31.14 No. 37C, C' Key, Lower Section, component of Pinned Key Assembly #2: E(/C' Keys #37C Oboe Key Part ............................................................................ $2.05 No. 37D, C Key, Upper Section, component of Pinned Key Assembly #2: E/C Keys #37D Oboe Key Casting ...................................................................... $12.85 No. 37E, C' Key, Lower Half, model 333 only, component of Pinned Key Assembly #2: E(/C' Keys #37E Oboe Key Part, with cup ............................................................ $12.03 No. 39A, Low B Pad Key #39A-R Oboe Key Part, with flat top cup ................................................ $16.75 #39A-F Oboe Key Part, with round top cup ............................................ $19.36 #39B Oboe Key Part ............................................................................ $1.88 #39F Oboe Key Part, with cup, for protege ......................................... $20.28 No. 39C, Connector to Low B, component of Pinned Key Assembly #3: Low B, B( & Alternate E( Keys #39C Oboe Key Part ............................................................................ $2.03 No. 39D, Low B Key #39D Oboe Key Casting ...................................................................... $14.47 No. 41A, Bell Key #41A-R Oboe Key Part, with flat top cup ................................................ $13.36 #41A-F Oboe Key Part, with round top cup ............................................ $15.97 #41B Oboe Key Part ............................................................................ $17.24 No. 41C, Low B Bridge Key #41C Oboe Key Part ............................................................................ $10.52 #41D Oboe Key Part ............................................................................ $8.03 No. 41E Key, component of Pinned Key Assembly #3: Low B, B( & Alternate E( Keys #41E Oboe Key Part, with lugs ........................................................... $26.89 #41F Oboe Key Part ............................................................................ $6.73 #41H Oboe Key Casting ...................................................................... $19.69 No. 43A, Low B( Vent #43A-R Oboe Key Part, with flat top cup ................................................ $14.09 #43A-F Oboe Key Part, with round top cup ............................................ $13.92 Parts to add Side F Key Set of Parts to add Oboe Side F Key .......................................... $41.98 The set includes the following:

1 #27C Lever 1 6mm post 1 #27D Spatula 1 .140" x .755" nickel silver tube 1 #352G Arbor 1 .125" x .270" nickel silver tube 1 #351R Arbor 1 short spring hook 1 4mm post 1" 1/16" brass wire 1 2.5mm post

18

BULK MATERIALS

Nickel Silver Rod Per Inch Per Foot 0100.093 3/32" ............................................................................................................................................. $0.15 $1.80 0100.125 1/8" ............................................................................................................................................. $0.37 $4.44 0100.140 9/64" (Oboe hinge rod size) ......................................................................................................... $0.41 $4.92 0100.156 5/32" (Bassoon hinge rod size) .................................................................................................... $0.44 $5.28 0100.187 3/16" (Contrabassoon hinge rod size) .......................................................................................... $0.64 $7.68 0100.250 1/4" ............................................................................................................................................. $0.84 $10.08 0100.281 9/32" ............................................................................................................................................. $1.25 $15.00 0100.312 5/16" ............................................................................................................................................. $1.67 $20.04 0100.375 3/8" ............................................................................................................................................. $2.05 $24.60 (Inquire for larger sizes)

Nickel Silver Tubing Per Inch Per Foot 0150.125 1/8" (.125"OD x .082"ID) ..................................................................................... $0.43 $5.16 0150.140 9/64" (.140" OD x .093"ID) .................................................................................... $0.39 $4.68 0150.156 5/32" (.156"OD x .093"ID) ..................................................................................... $0.55 $6.60 0150.171 11/64" (.172"OD x .124"ID) ..................................................................................... $0.61 $7.32

Nickel Silver Sheet Per Foot 0550.01 .022" Thick x 4" wide ......................................................................................................... $4.44

Nickel Silver Key Stock Per Inch Per Foot 0170.3 Oboe Key Stock, .103" x 5/8" ............................................................................................ $0.33 $3.96 0160.130 Bassoon Key Stock, .130" x 3/4" ........................................................................................ $0.50 $6.00

Nickel Silver Tee Stock Per Inch Per Foot 0180.4 Oboe Tee Stock .................................................................................................................. $1.37 $16.44 0180.1 Bassoon Tee Stock ............................................................................................................. $1.85 $22.20

Dimensions of Tee Stock:

A B C D

Bassoon 0.780" 0.250" 0.500" 0.160" Oboe 0.570" 0.195" 0.550" 0.130"

Hard Rubber Rod Per Inch Per Foot 0400.250 1/4" ............................................................................................................................................. $1.49 $17.88 0400.512 5/16" ............................................................................................................................................. $1.96 $23.52 0400.375 3/8" ............................................................................................................................................. $3.82 $45.84 0400.750 3/4" ............................................................................................................................................. $5.41 $64.92 0401.0000 1" ............................................................................................................................................. $11.46 $137.52

Brass Wire Per Inch Per Foot 0330.064 3/16" 14 gage (.0641") ................................................................................................................. $0.04 $0.48

Plastic Rod Per Inch Per Foot 0410.1870 3/16" Black Delrin (Roller stock) ................................................................................................. $0.46 $5.52 0410.093 3/32" Black Nylon Rod (Action rod) ........................................................................................... $0.28 $3.36 8790.1 #410 Action Rods, 3" .................................................................................................................. $0.85

Ultra Suede Per Square

Inch Per Square

Foot 0920.1 Ultrasuede, brown ............................................................................................................... $0.14 $20.00

Heat Shrink Tubing Per Inch Per Foot 0420.125 1/8" ............................................................................................................................................. $0.13 $1.56 0420.250 1/4" ............................................................................................................................................. $0.16 $1.92