PARTs MANUALmanuals.crary.com/manuals/airreel/12087_r0307.pdfNEW HOLLAND 970-973, 73C/74C CAsE iH 2020 PARTs MANUAL Manual PN 12087 Rev 030107 Companion to 12070 NEW HOLLAND 970-973

NEW HOLLAND 970-973, 73C/74CCAsE iH 2020

PARTs MANUAL

Manual PN 12087Rev 030107Companion to 12070

NEW HOLLAND970-97373C/74C

CAsE iH 2020

HOW TO REACH Us

Please Send us your Warranty CardPlease take time to fill in the information requested on the card. When you send in the completed card to us, we register your Air Reel and start coverage under our limited warranty.Two serial number stickers are included with each Air Reel. The decals are located on the Air Reel manifold. One sticker is to be placed on the warranty registration card and mailed back to Crary Industries. The second sticker is to be placed in the owner/s manual for future reference.

ADDREss HOURs TELEPHONE FAX NUMBER

E-MAiL iNTERNET

Crary Industries 237 12th St. NW P.O. Box 849 West Fargo, ND 58078-0849

Mon. - Fri.

8 A.M to 5 P.M. Central Time

For Parts and Service: 1-800-247-7335 Fax: 1-701-282-9522

For Service: [email protected] Visit us on the web @ www.crary.com

Page iiiNew Holland Air Reel Parts Catalog

Serial number decal

PARTS ORDeRINg INFORMATIONFor service assistance or parts, contact your nearest authorized Crary dealer or the factory. Your nearest authorized Crary dealer will need to know the serial number of your Air Reel to provide the most efficient service. See below for information on how to identify and record the serial number for your Air Reel.

ILLUSTRATION AND TeXTThe arrangement of this parts catalog is for easy identification of the Air Reel parts. All parts are illustrated in either as-sembled or exploded views. All illustrations are located on the left hand page with the associated parts information (text) on the right. Except for some common hardware, all parts are identified with an item number which corresponds to the “Item” column on the parts information page. The text pages list the reference number, part number, part description and the quantity required.

RePLACeMeNT PARTS

Only genuine Crary replacement parts should be used to repair the Air Reel. Crary replacement parts are available from your Crary Dealer. To obtain prompt, efficient service, remember to give the dealer the correct part description and serial number of the Air Reel.

When ordering parts for your unit provide the following:

1. The SeRIAL NUMBeR of your Air Reel.

2. The PART NUMBeR of the part.

3. The PART DeSCRIPTION.

4. The QUANTITY needed.

SeRIAL NUMBeR LOCATION

Always give your authorized Crary dealer the serial number of your Air Reel when ordering parts, requesting service, or any other information. Please record the serial number in the space provided below and on the warranty and registra-tion card.

Serial Number ________________________

WARNINGWe urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fit on this unit.

MANUFACTURED BY CRARY INDUSTRIES

MANUFACTURED IN U.S.A.XXXXXX

WEST FARGO, NORTH DAKOTA 58078 U.S.A.SERIAL NUMBER

Page iv New Holland Air Reel Parts Catalog

ContentsAIR MANIFOLD ASSeMBLY, 16’, 18’, 20’ ..............................................................2AIR MANIFOLD ASSeMBLY, 22’ ............................................................................4AIR MANIFOLD ASSeMBLY, 25’ ............................................................................6AIR MANIFOLD ASSeMBLY, 30’ ............................................................................8IDLeR geAR ASSeMBLY, 970-973 SeRIeS .......................................................10HUB/PINION geAR ASSeMBLY, 73C/74C, CIH 2020 ........................................10AIR TUBe ASSeMBLY .........................................................................................12ReeL BAT ARM ASSeMBLY ................................................................................14eCCeNTRIC MOUNT ASSeMBLY.......................................................................16eCCeNTRIC MOUNT PLATe/ ROLLeR ASSeMBLY, RH ...................................18eCCeNTRIC MOUNT PLATe/ ROLLeR ASSeMBLY, LH ....................................18ReeL BAT ASSeMBLY,16’, 18’, 20’, 22’, 25’ ........................................................20ReeL BAT ASSeMBLY, 30’ ..................................................................................22BAT TUBe/ ReeL ASSeMBLY .............................................................................24eCCeNTRIC ARM ASSeMBLY ............................................................................26eCCeNTRIC ARM & HYDRAULIC MOTOR ASSeMBLY ....................................28ReeL ARM MOUNT KIT HYDRAULIC FORe AND AFT.......................................30ReeL ARM MOUNT KIT MANUAL FORe AND AFT ............................................32SWITCH MOUNT PLATe ASSeMBLY .................................................................34FAN HOSe ASSeMBLY .......................................................................................34geARBOX/FAN ....................................................................................................36geARBOX (RePLACeMeNT PARTS) .................................................................38DRIVeLINe, 73C/74C, CIH 2020 .........................................................................40DRIVeLINe, 970-973 SeRIeS .............................................................................42geARBOX MOUNT DRIVe KIT, 73C/74C, CIH 2020 HeADeRS ........................44geARBOX MOUNT DRIVe KIT 970-973 HeADeRS ..........................................44RIgHT HAND DRIVe KIT, 73C/74C, 2020 CIH HeADeR ....................................46RIgHT HAND DRIVe KIT, 970-973 HeADeR ......................................................46AUXILIARY ReeL TINe KIT (OPTIONS) .............................................................48geARBOX/FAN eXTeNSION KIT (OPTIONS) ....................................................50DeCALS ...............................................................................................................52

New Holland 970-973 73C/74C

CAsE iH 2020

Parts Catalog Air Reel

Page � New Holland Air Reel Parts Catalog

AIR MANIFOLD ASSEMBLY, 16’, 18’, 20’ 03/07

Page �New Holland Air Reel Parts Catalog

22393 (16’), 22396 (18’), 22397 (20’), AIR MANIFOLD ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 11001 DeCAL, SAFeTY (CAUTION) 12 11002 DeCAL, WARNINg 13 15031 WASHeR, 3/8” FLAT ZP 24 15057 BOLT, 3/8 X 1” CR5 NC ZP 145 15388 NUT, 3/8” Ne NYLOCK ZP 166 15486 BOLT, 3/8 X 3-1/2” gR5 CRg 27 16155 DeCAL, SeRIAL NUMBeR 18 17406 STAMP STeeL PILLOWBLOCK 49 17407 BeARINg INSeRT, 1” HeX 4

10 17444 SeT COLLAR, 1” HeX 2

1122183 SHIeLD, DRIVe SHAFT (16‘) 122184 SHIeLD, DRIVe SHAFT (18‘) 122185 SHIeLD, DRIVe SHAFT (20‘) 1

1222184 SHIeLD, DRIVe SHAFT (16’) 1

22179SHIeLD, DRIVe SHAFT (18’) 1SHIeLD, DRIVe SHAFT (20’) 1

1322184 SHIeLD, DRIVe SHAFT (16’) 122187 SHIeLD, DRIVe SHAFT (18‘) 122188 SHIeLD, DRIVe SHAFT (20‘) 1

14 22364 WeLDMeNT, IDLeR MOUNT CLAMP RH 115 22365 WeLDMeNT, IDLeR MOUNT CLAMP LH 1

1624269-12 MANIFOLD, F.A.R. (16‘) 124272-12 MANIFOLD, F.A.R. (18‘) 124273-12 MANIFOLD, F.A.R. (20‘) 1

17 24910-12 WeLDMeNT, RH eND CLAMP (W/MOTOR MOUNT) 118 24975-12 WeLDMeNT, LH eND CLAMP (W/MOTOR MOUNT) 1

1925568-00 SHAFT, ReeL DRIVe (16‘) (179.06”) 125565-00 SHAFT, ReeL DRIVe (18‘) (203.13”) 125564-00 SHAFT, ReeL DRIVe (20‘) (227.13”) 1

20 25760-00 ASSeMBLY, HUB/PINION geAR (See Pg. 10 FOR DeTAILS) 4

21 15176 SCReW, 11/32 X 7/8 HWH AB THReAD ZP 322 11012 DeCAL, CRARY AIR ReeL 123 17224 DeCAL, CeNTeR MANIFOLD DIReCTION 1

16722 STRIPPINg, AIR ReeL (16’) (NOT SHOWN) 7.5 ft.16722 STRIPPINg, AIR ReeL (18’ AND 20’) (NOT SHOWN) 9 ft.

03/07 AIR MANIFOLD ASSEMBLY, 16’, 18’, 20’


AIR MANIFOLD ASSEMBLY, 22’ 03/07


22398 (22’), AIR MANIFOLD ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 11001 DeCAL, SAFeTY (CAUTION) 12 11002 DeCAL, WARNINg 13 11012 DeCAL, CRARY AIR ReeL 14 14022-00 COUPLeR, 1” HeX SHAFT 15 15031 WASHeR, 3/8” FLAT ZP 26 15057 BOLT, 3/8 X 1” CR5 NC ZP 147 15356 NUT, 5/16” NYLOCK 28 15388 NUT, 3/8” Ne NYLOCK ZP 169 15436 BOLT, 5/16” X 1-1/4” HeX 2

10 15486 BOLT, 3/8 X 3-1/2” gR5 CRg 212 17224 DeCAL, CeNTeR MANIFOLD DIReCTION 113 17406 STAMP STeeL PILLOWBLOCK 414 17407 BeARINg INSeRT, 1” HeX 415 17444 SeT COLLAR, 1” HeX 216 22184 SHIeLD, DRIVe SHAFT 117 22189 SHIeLD, DRIVe SHAFT 118 22193 SHIeLD, DRIVe SHAFT 119 22364 WeLDMeNT, IDLeR MOUNT CLAMP 120 22365 WeLDMeNT, IDLeR MOUNT CLAMP 121 24274-12 MANIFOLD, F.A.R. 1

22 24910-12 WeLDMeNT, RH eND CLAMP (W/MOTOR MOUNT) 1

23 24975-12 WeLDMeNT, LH eND CLAMP (W/MOTOR MOUNT) 1

24 25563-00 SHAFT, ReeL DRIVe (240”) 125 25575-00 SHAFT, ReeL DRIVe (11.38”) 1


27 15176 SCReW, 11/32 X 7/8 HWH AB THReAD ZP 416722 STRIPPINg, AIR ReeL (NOT SHOWN) 10.25 ft.

03/07 AIR MANIFOLD ASSEMBLY, 22’







10 15486 BOLT, 3/8 X 3-1/2” gR5 CRg 212 17224 DeCAL, CeNTeR MANIFOLD DIReCTION 113 17406 STAMP STeeL PILLOWBLOCK 414 17407 BeARINg INSeRT, 1” HeX 415 17444 SeT COLLAR, 1” HeX 216 22191 SHIeLD, DRIVe SHAFT 117 22189 SHIeLD, DRIVe SHAFT 118 25579-00 SHIeLD, DRIVe SHAFT 219 22364 WeLDMeNT, IDLeR MOUNT CLAMP 120 22365 WeLDMeNT, IDLeR MOUNT CLAMP 121 24277-12 MANIFOLD, F.A.R. 1



24 25563-00 SHAFT, ReeL DRIVe (240”) 125 25572-00 SHAFT, ReeL DRIVe (46.75”) 1


27 15176 SCReW, 11/32 X 7/8 HWH AB THReAD ZP 416722 STRIPPINg, AIR ReeL (NOT SHOWN) 13 ft.






10 15486 BOLT, 3/8 X 3-1/2” gR5 CRg 311 16155 DeCAL , SeRIAL NUMBeR 112 17224 DeCAL, CeNTeR MANIFOLD DIReCTION 113 17406 STAMPeD STeeL PILLOWBLOCK 514 17407 BeARINg INSeRT, 1” HeX (NOT SHOWN) 515 17444 SeT COLLAR, 1” HeX 216 22186 SHIeLD, DRIVe SHAFT (56”) 117 22188 SHIeLD, DRIVe SHAFT (82.5”) 118 22189 SHIeLD, DRIVe SHAFT (92”) 119 22193 SHIeLD, DRIVe SHAFT (74.12”) 120 22364 WeLDMeNT, IDLeR MOUNT CLAMP RH 221 22365 WeLDMeNT, IDLeR MOUNT CLAMP LH 122 24280-12 MANIFOLD, F.A.R. 1



25 25563-00 SHAFT, ReeL DRIVe (240”) 126 25570-00 SHAFT, ReeL DRIVe (107.38) 127 25577-00 SHIeLD, DRIVe SHAFT (12”) 1


29 15176 SCReW, 11/32 X 7/8 HWH AB THReAD ZP 416722 STRIPPINg, AIR ReeL (NOT SHOWN) 18 ft.


Page 10 New Holland Air Reel Parts Catalog

IDLER GEAR ASSEMBLY, 970-973 SERIES 03/07

HUB/PINION GEAR ASSEMBLY, 73C/74C, CIH 2020 03/07

Page 11New Holland Air Reel Parts Catalog

03/07 IDLER GEAR ASSEMBLY, 970-973 SERIES

22164, IDLER GEAR ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 15356 NUT, 5/16” Ne NYLOCK ZP 32 15436 BOLT, 5/16 X 1-1/4” gR5 HHCS NC ZP 33 17669 RADIAL BeARINg - 17MM 14 17670 SHOULDeR BORe ADAPTeR 15 17703 ILDeR geAR, 1.575 BORe 16 21978 PINION ReTAINeR RINg 2

03/07 HUB/PINION GEAR ASSEMBLY, 73C/74C, CIH 2020

25760-00, ASSEMBLY HUB/PINION GEARITEM PART NUMBER DESCRIPTION QTY

1 13768-00 HUB, PINION geAR 12 25658-12 RINg, PINION ReTAINeR 23 17703 geAR, IDLeR 14 15436 BOLT, 5/16 X 1-1/4 HeX 15 15356 NUT, 5/16 NYLOCK 46 15154 BOLT, 5/16 X 2-1/2 HeX 3

Page 1� New Holland Air Reel Parts Catalog

AIR TUBE ASSEMBLY 03/07

Page 1�New Holland Air Reel Parts Catalog

AIR TUBE ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

115008 BOLT, 3/8 X 2” gR5 HeX CAPSCReW ZP (16’-25’) 815008 BOLT, 3/8 X 2” gR5 HeX CAPSCReW ZP (30’) 10

215031 WASHeR, 3/8” FLAT ZP (16’-25’) 2415031 WASHeR, 3/8” FLAT ZP (30’) 30

315047 NUT, 3/8” CeNTeR LOCKNUT ZP (16’-25’) 815047 NUT, 3/8” CeNTeR LOCKNUT ZP (30’) 10

4 15176

SCReW, 11/32 X 7/8 HWH AB THReADeD ZP (16’) 54SCReW, 11/32 X 7/8 HWH AB THReADeD ZP (18’) 60SCReW, 11/32 X 7/8 HWH AB THReADeD ZP (20’) 69SCReW, 11/32 X 7/8 HWH AB THReADeD ZP (22’) 75SCReW, 11/32 X 7/8 HWH AB THReADeD ZP (25’) 87SCReW, 11/32 X 7/8 HWH AB THReADeD ZP (30’) 105

5 17313

FOAM SeAL, AIR TUBe (16’) 18FOAM SeAL, AIR TUBe (18’) 20FOAM SeAL, AIR TUBe (20’) 23FOAM SeAL, AIR TUBe (22’) 25FOAM SeAL, AIR TUBe (25’) 29FOAM SeAL, AIR TUBe (30’) 35

6 22153

AIR TUBe WeLDMeNT (16’) 16AIR TUBe WeLDMeNT (18’) 18AIR TUBe WeLDMeNT (20’) 21AIR TUBe WeLDMeNT (22’) 23AIR TUBe WeLDMeNT (25’) 27AIR TUBe WeLDMeNT (30’) 33

7 22164ASSeMBLY, IDLeR geAR (16’-25’) (See Pg. 10) 8ASSeMBLY, IDLeR geAR (30’) (See Pg. 10) 10

8 22346ReeL BAT ARM ASSeMBLY (16’-25’) (See Pg. 14) 4ReeL BAT ARM ASSeMBLY (30’) See Pg. 14) 5

9 22405 DOUBLe AIR TUBe ASSeMBLY 2

03/07 AIR TUBE ASSEMBLY


REEL BAT ARM ASSEMBLY 03/07


03/07 REEL BAT ARM ASSEMBLY

22346, REEL BAT ARM ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 12528 BeARINg CAP, PLASTIC 62 15030 WASHeR, 1/4” FLAT ZP 123 15140 BOLT, 5/16” X 2” gR5 HCS ZP 64 15178 NUT, 5/16” CeNTeRLOCK NC ZP 125 15282 BOLT, 5/16 X 1-1/2 gR5 HeX CPS ZP 66 15356 NUT, 5/16” Ne NYLOCK ZP 447 15396 BOLT, 5/16 X 7/8 NC HHCS gR5 ZP 448 17404 BeARINg BASe, PLASTIC 69 17634 SeCTION, INTeRNAL geAR 8

10 21550 ReeL eCCeNTRIC ARM 611 21509 BeARINg W/CAP 6


ECCENTRIC MOUNT ASSEMBLY 03/07


ECCENTRIC MOUNT ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 15047 NUT, 3/8” CeNTeR LOCKNUT ZP 32 15057 BOLT, CARR 3/8 X 1” gR5 NC ZP 33 15260 WASHeR, 3/8” SAe FLT ZP 3

4 24919 ASSeMBLY, RH eCCeNTRIC MOUNT PLATe/ROLLeR (See Pg. 18) 1

24920 ASSeMBLY, LH eCCeNTRIC MOUNT PLATe/ROLLeR (NOT SHOWN) (See Pg. 18) 1

03/07 ECCENTRIC MOUNT ASSEMBLY


ECCENTRIC MOUNT PLATE/ ROLLER ASSEMBLY, RH 03/07

ECCENTRIC MOUNT PLATE/ ROLLER ASSEMBLY, LH 03/07


24920, ECCENTRIC MOUNT PLATE/ROLLER ASSEMBLY, LEFT HANDITEM PART NUMBER DESCRIPTION QTY

1 15008 BOLT, 3/8 X 2 gR5 HeX CAPSCReW ZP 32 15031 WASHeR, 3/8” FLAT ZP 33 15047 NUT, 3/8 CeNTeR LOCKNUT ZP 34 15250 WASHeR, 5/16” FLAT ZP 95 17629 RADIAL BeARINg 66 21588 ROLLeR BUSHINg 37 21797 PLASTIC ROLLeR 3”SM, VIRgN UHMW 38 24905-12 PLATe, eCCeNTRIC ROLLeR MOUNT 1

24919, ECCENTRIC MOUNT PLATE/ROLLER ASSEMBLY, RIGHT HANDITEM PART NUMBER DESCRIPTION QTY

1 15008 BOLT, 3/8 X 2 gR5 HeX CAPSCReW ZP 32 15031 WASHeR, 3/8” FLAT ZP 33 15047 NUT, 3/8 CeNTeR LOCKNUT ZP 34 15250 WASHeR, 5/16” FLAT ZP 95 17629 RADIAL BeARINg 66 21588 ROLLeR BUSHINg 37 21797 PLASTIC ROLLeR 3”SM, VIRgN UHMW 38 24905-12 PLATe, eCCeNTRIC ROLLeR MOUNT 1

03/07 ECCENTRIC MOUNT PLATE/ROLLER ASSEMBLY, LH

03/07 ECCENTRIC MOUNT PLATE/ ROLLER ASSEMBLY, RH

Page �0 New Holland Air Reel Parts Catalog

REEL BAT ASSEMBLY, 16’, 18’, 20’, 22’, 25’ 03/07

Page �1New Holland Air Reel Parts Catalog

03/07 REEL BAT ASSEMBLY, 16’, 18’, 20’, 22’, 25’

REEL BAT ASSEMBLY

ITEM PART NUMBER DESCRIPTIONKIT # 25413

16’

KIT # 25416

18’

KIT # 25417

20’

KIT # 25418

22’

KIT # 25421

25’1 15178 NUT, 1/2” CeNTeRLOCK NC ZP 12 12 12 12 122 15282 BOLT, 5/16 X 1-1/2 gR5 HeX CPS ZP 12 12 12 12 123 24888 SHAFT, BAT SPLICe 2 2 2 2 2

424923 BAT/TUBe ReeL TINe (60”) 1 1

24924 BAT/TUBe ReeL TINe (65”) 1


24931 BAT/TUBe ReeL TINe (86”) 1 1 1



24925 BAT/TUBe ReeL TINe (66”) 1 1

24934 BAT/TUBe ReeL TINe (96”) 1 17 27983-00 ASSeMBLY, LH eND SHAFT 1 1 1 1 18 27984-00 ASSeMBLY, RH eND SHAFT 1 1 1 1 1

NOTEThe kit is shipped with the bat tubes disconnected.

Page �� New Holland Air Reel Parts Catalog

REEL BAT ASSEMBLY, 30’ 03/07

Page ��New Holland Air Reel Parts Catalog

03/07 REEL BAT ASSEMBLY, 30’

REEL BAT ASSEMBLY

ITEM PART NUMBER DESCRIPTIONKIT # 25424

30’1 15178 NUT, 5/16” CeNTeRLOCK NC ZP 162 15282 BOLT, 5/16 X 1-1/2 gR5 HeX CPS ZP 163 24888 SHAFT, BAT SPLICe 34 24929 BAT TUBe/ReeL TINe (77”) 25 24931 BAT TUBe/ReeL TINe (86”) 16 24934 BAT TUBe/ReeL TINe (96”) 17 27983-00 ASSeMBLY, LH eND SHAFT 18 27984-00 ASSeMBLY, RH eND SHAFT 1

NOTEThe kit is shipped with the bat tubes disconnected.


BAT TUBE/ REEL ASSEMBLY 03/07


03/07 BAT TUBE/ REEL ASSEMBLY

ITEM PART NUMBER DESCRIPTION

BAT TUBE ASSEMBLY

24922

24923

24924

24925

24926

24929

24931

24933

24933

1 12529 TINe, PLASTIC ReeL 10 10 11 12 12 14 15 17 172 15597 SCReW, 12-24 X 2” FLAT HD. 10 10 11 12 12 14 15 17 17

3

24875-12

TUBe, ReeL BAT

1

24876-12 1

24877-12 1

24878-12 1

24879-12 1

24882-12 1

24884-12 1

24886-12 1

24887-12 1


ECCENTRIC ARM ASSEMBLY 03/07


03/07 ECCENTRIC ARM ASSEMBLY

22347, ECCENTRIC ARM ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 12528 BeARINg CAP, PLASTIC 62 15030 WASHeR, 1/4” FLAT ZP 123 15219 BOLT, 5/16 X 1” gR5 HHCS NC ZP 124 15250 WASHeR, 5/16” FLAT 125 15300 BOLT, 5/16 X 5/8 gR5 HeX CPS ZP 246 15356 NUT, 5/16” Ne NYLOCK ZP 487 15403 BOLT, 5/16 -18” X 1-3/4” gR5 HCS ZP 68 15754-00 BOLT, 5/16 -18” X 2-1/4” gR5 HCPS 69 17404 BeARINg BASe, PLASTIC 6

10 21550 ReeL eCCeNTRIC ARM 611 21976 eCCeNTRIC, RINg FAR 112 24318-12 SHIeLD, eND-6 BAT 113 21509 BeARINg W/CAP 6


ECCENTRIC ARM & HYDRAULIC MOTOR ASSEMBLY 03/07


03/07 ECCENTRIC ARM & HYDRAULIC MOTOR ASSEMBLY

ECCENTRIC ARM AND HYDRAULIC MOTORITEM PART NUMBER DESCRIPTION QTY

1 12491 MOTOR, HYDRAULIC geAR SAe A 2 BLT/8.0 CID 12 15014 BOLT, 1/2 X 1-1/2 gR5 HeX CAPSW ZP 23 15034 WASHeR, 1/2” FLAT ZP 124 15049 NUT, 1/2” CeNTeR LOCKNUT ZP 85 15356 NUT, 5/16” NYLOCK 26 15436 BOLT, 5/16” X 1-34” HeX 27 15562 BOLT, 1/2 X 2-1/2 HeX SKT B-HD CPS 68 16067 ADAPTeR, -10M O-RINg/-10MJIC 45 Deg 29 16091 T-BOLT CLAMP 8-1/4” 1

10 21520 PIVOT STRAP BUSHINg 611 21924 TUBe CAP - 8” (NOTCHeD) 112 22347 eCCeNTRIC ARM ASSeMBLY -6 BAT ReeL (See Pg. 26)13 22489 BRACe CLAMP ASSeMBLY 114 14022-00 COUPLeR, 1” HeX SHAFT 1


REEL ARM MOUNT KIT HYDRAULIC FORE AND AFT 03/07

RIGHT HAND REEL ARM

LEFT HAND REEL ARM


03/07 REEL ARM MOUNT KIT HYDRAULIC FORE AND AFT

23900, REEL ARM MOUNT KIT (LEFT AND RIGHT HAND)ITEM PART NUMBER DESCRIPTION QTY

1 15009 BOLT, 3/8” X 3” gR5 HeX CAPSCReW ZP 22 15047 NUT, 3/8” CeNTeR LOCKNUT 103 15049 NUT, 1/2” CeNTeRLOCK gRB ZP 24 15057 BOLT, CARR. 3/8” X 1” gR5 NC ZP 85 15092 BOLT, 1/2” X 2-1/2” gR5 HeX CAP ZP 26 15375 COTTeR PIN, 1/8 X 1.00” ZP 27 16544 CLeVIS PIN, 3/8” X 2” LONg 28 17843 eLeCTRIC ACTUATOR 19 22259 ReeL SUPPORT PAD-RH 1

10 22260 ReeL SUPPORT PAD-LH 111 22479 ASSeMBLY, PIVOT CLAMP 112 23501 HALF CLAMP 213 23898 ReeL SUPPORT WLDMT LH (NH) 114 22809 gUIDe SADDLe 215 23899 ReeL SUPPORT WLDMT RH (NH) 116 41158 BUSHINg 2


REEL ARM MOUNT KIT MANUAL FORE AND AFT 03/07

RIGHT HAND REEL ARM

LEFT HAND REEL ARM


03/07 REEL ARM MOUNT KIT MANUAL FORE AND AFT

23900, REEL ARM MOUNT KIT (LEFT AND RIGHT HAND) - MANUAL FORE & AFTITEM PART NUMBER DESCRIPTION QTY

1 15009 BOLT, 3/8” X 3” gR5 HeX CAPSCReW ZP 22 15047 NUT, 3/8” CeNTeR LOCKNUT 123 15049 NUT, 1/2” CeNTeRLOCK gRB ZP 44 15057 BOLT, CARR. 3/8” X 1” gR5 NC ZP 85 15086 BOLT, 1/2” X 3” gR5 HeX HD ZP 26 15092 BOLT, 1/2” X 2-1/2” gR5 HeX CAP ZP 27 15174 BOLT, 1/2” X 4” HeX CPS g5 ZP 28 15375 COTTeR PIN, 1/8 X 1.00” ZP 29 16544 CLeVIS PIN, 3/8” X 2” LONg 2

10 17843 eLeCTRIC ACTUATOR 111 22248 ADJUSTMeNT BRACKeT WeLDMeNT (AC & NH) 212 22259 ReeL SUPPORT PAD-RH 113 22260 ReeL SUPPORT PAD-LH 114 22479 ASSeMBLY, PIVOT CLAMP 115 23501 HALF CLAMP 216 23898 ReeL SUPPORT WLDMT LH (NH) 117 22809 gUIDe, SADDLe 218 23899 ReeL SUPPORT WLDMT RH (NH) 119 41158 BUSHINg 2


FAN HOSE ASSEMBLY 03/07

SWITCH MOUNT PLATE ASSEMBLY 03/07


03/07 FAN HOSE ASSEMBLY

03/07 SWITCH MOUNT PLATE ASSEMBLY

FAN HOSE ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 12146 eLBOW, RUBBeR - 8” X 45 Deg. 12 16091 T-BOLT CLAMP 8-1/4” 23 16092 T-BOLT CLAMP 8-11/16”” 44 17437 MANIFOLD eLBOW - 8” (MR) 15 17777 8” FLeX HOSe X 8’ Lg 16 21512 eLBOW SUPPORT BAND 27 22806 FLeX HOSe CHAIN ASSeMBLY 1

24333, SWITCH MOUNT PLATE ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 12167 DeCAL, ACTUATOR SWITCH 12 13901 SWITCH, eLeCTRIC 3P COL 23 17849 eLeCTRIC SWITCH ASSeMBLY - SPLIT 6 AMP 14 17850 eLeCTRIC SWITCH ASSeMBLY - SPLIT 15 AMP 15 24332-12 PLATe, SWITCH MOUNT 1


GEARBOX/FAN 03/07

Note: Parts marked with an asterisk (*) are in-cluded in the Rotary Screen Kit (PN 23143).


03/07 GEARBOX/FAN

22758, GEARBOX/FAN ASSEMBLYITEM PART NUMBER DESCRIPTION QTY

1 13460-00 ACTUATOR, 2” STROKe WARNeR 12 14056-00 FAN ROTOR, 16.5” X 3 CW, 7/8 STL 13 15001 BOLT, 1/4 X 3/4 HeX HD 44 15014 BOLT, 1/2 X 1-1/2 HeX HD 45 15049 NUT, 1/2” CeNTeRLOCK 46 15051 NUT, 3/8 SeRRATeD FLANge 127 15053 NUT, 1/4 SeRRATeD FLANge 88 15055 NUT, 3/4” NF CASTLe 19 15068 PIN, 5/32 X 1-1/4 COTTeR 1

10 15076 BOLT, 3/8 X 1 THReAD CUT 811 15087 NUT, 1/4” CeNTeRLOCK 212 15095 SCReW, NO. 14 X 1/2” TAPPINg HWH ZP 613 15098 WASHeR, 3/4” SAe FLAT 114 15099 WASHeR, 7/8” SAe FLAT ZP 215 15129 WASHeR, 5/8 SAe FLAT 216 15238 BOLT, 1/4 X 3/4” CRg 417 15342 BOLT, 1/4 X 1-1/2 HCS g5 ZP 218 15364 BOLT, 3/8 X 1-1/4 HeX HD 1219 15397 NUT, # 10X24 NYLOCK 420 15552 BOLT, #10-24 X 1IN. gR8 HCPS 421 16449 BeARINg, 5/8” 2-BOLT FLNg 222 21193 CASTINg, 8” FAN RH W/BUTTeRFLY 123 21194 CASTINg, 8” FAN LH W/BUTTeRYFLY 124 21444 LARge BUTTeRFLY PLATe 125 21445 HUB/MOTOR MOUNT PLATe (8IN.-B PILOT) 126 22324 geARBOX, 8.44:1 127 22655 BASe 128 23152 WeLDMeNT, BASe STRAP 129 23155 WeLDMeNT, PIVOT 130 23158 WeLDMeNT, SCReeN CLeANeR 131 23161 WeLDMeNT, SCReeN/BLADe 132 23163 WeLDMeNT, SCReeN CAP 133 25592-12 WRAP, ROTARY SCReeN 134 25638-35 WeLDMeNT, INDICTATOR 135 25641-12 WeLDMeNT, VALVe ACTUATOR 136 25644-12 WeLDMeNT, ACTUATOR MOUNT 137 7022 KeY, 3/16” 1

23143 ROTARY SCReeN KIT (PARTS MARKeD WITH ASTeRISK)


GEARBOX (REPLACEMENT PARTS) 03/07


03/07 GEARBOX (REPLACEMENT PARTS)

GEARBOX (REPLACEMENT PARTS) (22326 & 22327)

ITEM PART NUMBER DESCRIPTION

223268.831:1

QTY

223279.375:1

QTY1 16807 66 geAR, SP BeV LH 19T 1 12 NPN 66 geAR, SP BeV RH 29T 1 13 NPN 11 NUT, LOCK 3/4" NF 1 14 NPN 66 SHIM, .002 ReD 2 25 NPN 66 SHIM, .005 BLUe 2 26 NPN SPeC. HOUSINg, SUB-ASSeMBLY 1 17 NPN SPeC. HOUSINg, PINION 1 18 NPN SPeC. CAP, OPeN 2 29 NPN SPeC. CAP, CLOSeD 2 2

10 16821 SPeC. SLeeVe, INPUT 1 111 16820 SPeC. SHAFT, OUTPUT PINION 1 1

12NPN SPeC. geAR INTg HeL LH 14T 1NPN SPeC. geAR INTg HeL LH 14T 1

13NPN SPeC. geAR, HeL RH 81T 1NPN SPeC. geAR, HeL RH 86T 1

14 NPN SPeC. SPACeR 1 115 NPN SPeC. SHIM, .002 ReD 4 416 NPN SPeC. SHIM, .005 BLUe 4 417 NPN SPeC. SHIM, .002 ReD 4 418 NPN SPeC. SHIM, .005 BLUe 4 419 16815 BeARINg, BALL 206NPP OR eQUIVALeNT 2 220 16816 BeARINg, CUP LM67010 OR eQUIVALeNT 2 221 16817 BeARINg, CUP 27620 OR eQUIVALeNT 2 222 16818 BeARINg, CONe LM67048 OR eQUIVALeNT 2 223 16819 BeARINg, CONe 27687 OR eQUIVALeNT 2 224 NPN SCReW, 3/8" X 1" NC HHCS gR5 4 425 NPN SCReW, 5/16" X 1" NC HHCS gR5 20 2026 NPN SCReW, 3/8" X 1-1/4" NC HHCS gR5 8 827 NPN WASHeR, 3/4" X 1-1/2" X 1/8" 1 128 NPN WASHeR, 1-17/64" X 1-3/4" X 1/8" 2 229 NPN NUT, 3/8" NC HeX 8 830 NPN KeY, 1/4" SQUARe X 15/16" P&W 1 131 NPN KeY, 3/4" SQUARe X 1-1/2" SQUARe eND 1 132 NPN KeY, 1/4" X 1" WOODRUFF 1 133 16814 RINg, ReTAININg 5160-118 1 134 NPN RINg, BeVeLeD ReTAININg N5002-244 1 135 NPN OIL, MOBILUBe SHC 75W-90 40 OZ 40 OZ36 NPN PLATe, NAMe, CRARY 1 137 NPN PAINT, FLAT BLACK 5.12 5.1238 NPN PLUg, PIPe SOCKeT 1/4 NPT 2 239 NPN PLUg, PIPe 1/2" O-RINg BOSS 3 340 NPN PLUg, VeNTeD 1/8 NPT, 1-5 PSI BALL 1 141 16625 SeAL, 472681 OR eQUIVALeNT 1 142 16624 SeAL, 32395 OR eQUIVALeNT 2 243 NPN O-RINg, -044 1 144 NPN O-RINg, -158 2 245 NPN O-RINg, -138 2 246 NPN SCReW, 5/16" X 3/4" NC HHCS gR5 1 147 NPN TAg, LUBRICATION 1 1

16621 geARBOX geAR KIT 116622 geARBOX geAR KIT 1


DRIVELINE, 73C/74C, CIH 2020 03/07


03/07 DRIVELINE, 73C/74C, CIH 2020

26084-00, 73-C SERIES DRIVELINEITEM PART NUMBER DESCRIPTION QTY

1 15219 BOLT, 5/16” X 1” gR5 HHCS NC ZP 62 15356 NUT, 5/16” Ne NYLOCK ZP 63 13913-00 COUNTeR FLANge, 1-3/8” 6 SPLINe W/QD 14 14389-00 DRIVeLINe CLUTCH, 1-3/8” 6 SPLINe(L) 1

26084-00, ASSEMBLY DRIVELINE/CFLANGE -L (1-3/8” 6 SPLINE)ITEM PART NUMBER DESCRIPTION QTY

1 0883-0120-00 KIT, CROSS AND BeARINg W-2400 22 12209 SAFeTY CHAIN 13 12215 YOKe, INBOARD 1B 14 12218 YOKe, INBOARD 1A 15 12220 CONe, 6 RIB SAFTeY 26 12223 RINg, SC25 BeARINg 27 13913-00 COUNTeR FLANge, 1-3/8” 6 SPLINe W/QD 18 14714-00 YOKe, FLANge 19 14744-00 CLUTCH, FRICTION 1

A 14061-00 SPRINg, BeLVILLe (WSCHIeD) 1B 14062-00 SeT, FRICTION DISC 1C 14720-00 YOKe, FLANge 1D 14736-00 PLATe, THRUST 1e 14737-00 HUB, CLUTCH 1F 14738-00 BACK-UP RINg 1g 14739-00 BALL, CLUTCH 3H 14740-00 SPRINg, COMPReSSION 1I 14741-00 COLLAR, LOCK 1J 14742-00 RINg, BACKUP 1K 14743-00 RINg, SNAP 1L 15647 NUT, M10 X 1.5 HeX NYLOCK TYPe Ne 6M 15747-00 BOLT, M10 X 1.5 X 50 CLASS 8.8 HC 6

10 14732-00 PROFILe, INNeR 1B (LONg) 111 14733-00 PROFILe, OUTeR 2A (LONg) 112 14734-00 TUBe, INNeR SHIeLD (LONg) 113 14735-00 TUBe, OUTeR SHIeLD (LONg) 114 15219 BOLT, 5/16 X 1” gR5 HHCS NC ZP 615 15356 NUT, 5/16” Ne NYLOCK ZP 616 15575 PIN, M10 X 80 SPRINg 2


DRIVELINE, 970-973 SERIES 03/07


03/07 DRIVELINE, 970-973 SERIES

26083-00, 972/973- SERIES DRIVELINEITEM PART NUMBER DESCRIPTION QTY

1 15219 BOLT, 5/16” X 1” gR5 HHCS NC ZP 62 15356 NUT, 5/16” Ne NYLOCK ZP 63 13913-00 COUNTeR FLANge, 1-3/8” 6 SPLINe W/QD 14 14388-00 DRIVeLINe CLUTCH, 1-3/8” 6 SPLINe(S) 1

26083-00,ASSEMBLY, DRIVELINE/CFLANGE -S (1-3/8” 6 SPLINE)ITEM PART NUMBER DESCRIPTION QTY

1 0883-0120-00 KIT, CROSS AND BeARINg W-2400 22 12209 SAFeTY CHAIN 13 12215 YOKe, INBOARD 1B 14 12218 YOKe, INBOARD 1A 15 12220 CONe, 6 RIB SAFTeY 26 12223 RINg, SC25 BeARINg 27 13913-00 COUNTeR FLANge, 1-3/8” 6 SPLINe W/QD 18 14714-00 YOKe, FLANge 19 14744-00 CLUTCH, FRICTION 1

A 14061-00 SPRINg, BeLVILLe (WSCHIeD) 1B 14062-00 SeT, FRICTION DISC 1C 14720-00 YOKe, FLANge 1D 14736-00 PLATe, THRUST 1e 14737-00 HUB, CLUTCH 1F 14738-00 RINg, BACKUP 1g 14739-00 CLUTCH, BALL 3H 14740-00 SPRINg, COMPReSSION 1I 14741-00 COLLAR, LOCK 1J 14742-00 BACK-UP, RINg 1K 14743-00 RINg, SNAP 1L 15647 NUT, M10 X 1.5 HeX NYLOCK TYPe Ne 6M 15747-00 BOLT, M10 X 1.5 X 50 CLASS 8.8 HC 6

N 15748-00 BOLT, M12 X 1 X 1.75 X 65 CLASS 8.8 HCP (NOT SHOWN) 1

O 15749-00 NUT, M12 X 1.75 HeX NYLOCK TYPe Ne (NOT SHOWN) 1

10 14728-00 PROFILe, INNeR 1B (SHORT) 111 14729-00 PROFILe, OUTeR 2A (SHORT) 112 14730-00 TUBe, INNeR SHIeLD (SHORT) 113 14731-00 TUBe, OUTeR SHIeLD (SHORT) 114 15219 BOLT, 5/16 X 1” gR5 HHCS NC ZP 615 15356 NUT, 5/16” Ne NYLOCK ZP 616 15575 PIN, M10 X 80 SPRINg 2


GEARBOX MOUNT DRIVE KIT, 73C/74C, CIH 2020 HEADERS 03/07

GEARBOX MOUNT DRIVE KIT 970-973 HEADERS 03/07


03/07 GEARBOX MOUNT DRIVE KIT, 73C/74C, CIH 2020 HEADERS

25718, GEARBOX MOUNT DRIVE KIT ITEM PART NUMBER DESCRIPTION QTY

1 12457 BUSHINg, SD 1-3/8” 22 15013 BOLT, 1/2 X 1-1/4” gR5 HHCS NC ZP 63 15049 NUT, 1/2” CeNTeR LOCKNUT ZP 44 15097 WASHeR, 1/2” SAe FLAT ZP 85 15234 BOLT, 1/2 X 6 g5 HCS - ZP 26 15282 BOLT, 5/16 X 1-1/2 gR5 HeX CPS ZP 67 15498 KeY, 5/16 X 1-1/2 SQUARe 28 22696 SHIeLD WeLDMeNT 29 24303-12 SPACeR 8

10 25764-12 SUPPORT, MOUNT PLATe 1

22677, GEARBOX MOUNT DRIVE KITITEM PART NUMBER DESCRIPTION QTY

1 12457 BUSHINg, SD 1-3/8” 22 15013 BOLT, 1/2 X 1-1/4” gR5 HHCS NC ZP 63 15049 NUT, 1/2” CeNTeRLOCK ZP 24 15097 WASHeR, 1/2” SAe FLAT ZP 85 15282 BOLT, 5/16 X 1-1/2 gR5 HeX CPS ZP 66 15498 KeY, 5/16 X 1-1/2” SQUARe 27 22696 SHIeLD WeLDMeNT 28 24303-12 SPACeR 89 24636-12 SUPPORT, MOUNT PLATe 1

03/07 GEARBOX MOUNT DRIVE KIT 970-973 HEADERS


RIGHT HAND DRIVE KIT, 73C/74C, 2020 CIH HEADER 03/07

RIGHT HAND DRIVE KIT, 970-973 HEADER 03/07


03/07 RIGHT HAND DRIVE KIT 73C/74C, 2020 CIH HEADER

03/07 RIGHT HAND DRIVE KIT, 970-973 HEADER

25719, RIGHT HAND DRIVE KITITEM PART NUMBER DESCRIPTION QTY.

1 15003 BOLT, 5/16” X 3/4” gR5 HeX CAPSCReW ZP 32 15250 WASHeR, 5/16” FLAT ZP 33 15402 NUT, 5/16” -18 TINNeR U-TYPe 34 24037-12 SLIP CLUTCH SHIeLD 15 24038-12 PLATe, SHIeLD MOUNT 16 26084-00 ASSeMBLY, DRIVeLINe/C-FLANge-L 1

24108, RIGHT HAND DRIVE KITITEM PART NUMBER DESCRIPTION QTY.

1 15003 BOLT, 5/16” X 3/4” gR5 HeX CAPSCReW ZP 32 15250 WASHeR, 5/16” FLAT ZP 33 15402 NUT, 5/16” -18 TINNeRMAN U-TYPe 34 24037-12 SLIP CLUTCH SHIeLD 15 24038-12 PLATe, SHIeLD MOUNT 16 24237-12 PLATe, BeARINg MOUNT 17 26083-00 ASSeMBLY, DRIVeLINe/C-FLANge-S 1


AUXILIARY REEL TINE KIT (OPTIONS) 03/07

Right Side

Left Side


03/07 AUXILIARY REEL TINE KIT (OPTIONS)

25605 AUXILIARY REEL TINE KIT (OPTIONS)ITEM PART NUMBER DESCRIPTION QTY

1 15031 WASHeR, 3/8” FLAT ZP 22 15047 NUT, 3/8 CeNTeR LOCKNUT ZP 23 15115 BOLT, CRg 3/8 X 2-1/2” gR5 NC SP 24 15302 STL MCH BSH, 7/8 ID NAR-RIM 10gA 4- 25602-00 RH AUX. ReeL TINe ASSeMBLY (CONSISTS OF) 15 25601-12 PIVOT STRAP/TUBe WeLDMeNT 16 12529 TINe, PLASTIC ReeL 17 15597 SCReW, 12-14 X 2” FLAT HD, THD. FORM 1- 25603-00 LH AUX. ReeL TINe ASSeMBLY (CONSISTS OF) 15 25601-12 PIVOT STRAP/TUBe WeLDMeNT 16 12529 TINe, PLASTIC ReeL 17 15597 SCReW, 12-14 X 2” FLAT HD, THD. FORM 1


GEARBOX/FAN EXTENSION KIT (OPTIONS) 03/07


03/07 GEARBOX/FAN EXTENSION KIT (OPTIONS)

24493, GEARBOX/FAN EXTENSION KITITEM PART NUMBER DESCRIPTION QTY

1 10218 30 MM BeARINg 12 13014 U-BOLT, FAN MOUNT 3/8 X 3 X 4” ZP 13 15006 BOLT, 3/8” X 1” gR5 HeX CAPSCReW ZP 24 15012 BOLT, 1/2” X 1” gR5 HeX CAPSCReW ZP 25 15014 BOLT, 1/2” X 1-1/2” gR5 HeX CAPSCReW ZP 46 15031 WASHeR, 3/8” FLAT ZP 27 15042 NUT, 3/8” HeX NUT NC ZP 48 15049 NUT, 1/2” CeNTeR LOCKNUT ZP 49 15097 WASHeR, 1/2” SAe FLAT ZP 4

10 15099 WASHeR, 7/8” SAe FLAT ZP 211 22341 KeY, 3/16” SQ X 2” PLAIN 112 24642 SHAFT/COUPLeR WeLDMeNT 113 24495-12 HUB, MACHINeD eXTeNSION 114 24510-12 PLATe, BeARINg ReTAINeR 115 24638-12 BRACKeT, eXTeNSION SUPPORT - CASe IH (SHORT) 116 24639-12 BRACKeT, eXTeNSION SUPPORT - CASe IH (LONg) 117 24640-12 BRACKeT, eXTeNSION SUPPORT - JD/NH 118 24641-12 BRACKeT, eXTeNSION SUPPORT - gLeANeR 1


DECALS 03/07

Item 1

Item 2

Item 3

Item 4

TM

THIS SIDE OF MANIFOLD IS TO BE

TOWARD THE COMBINE.

237 NW 12 TH ST BOX 849 WEST FARGO, ND 58078(701)-282-5520

P/N 17224


03/07 DECALS

DECALSITEMS PART NUMBER DESCRIPTION QTY

1 11001 DeCAL, CAUTION 12 11002 DeCAL, WARNINg 13 11012 DeCAL, CRARY AIR ReeL 14 17224 DeCAL, CTR MANIFOLD DIReCTION 1

237 12th St. NW • P.O.Box 849West Fargo, ND 58078-0849

(701)282-5520 • (701)282-9522www.crary.com

Documents

PARTs MANUALmanuals.crary.com/manuals/airreel/12087_r0307.pdfNEW HOLLAND 970-973, 73C/74C CAsE iH 2020 PARTs MANUAL Manual PN 12087 Rev 030107 Companion to 12070 NEW HOLLAND 970-973