Embed Size (px)
Citation preview
Quality Parts and Services
PARTS CATALOG 2017
TABLE OF CONTENTS
FITTINGS ................................................................... 1
TUBE FITTINGS .......................................................... 6
TUBE TO MALE PIPE ................................................................. 6
TUBE TO FEMALE PIPE .............................................................. 7
TUBE TO TUBE UNION .............................................................. 8
TUBE CONNECTORS/ADAPTERS ................................................ 9
DUOLOK TO 37O FLARE (AN) ................................................... 10
TUBE TO O-RING FACE SEAL ................................................... 11
TUBE TO SAE .......................................................................... 12
CAP AND PLUG ....................................................................... 13
COMPONENTS ......................................................................... 14
REGULATORS ............................................................ 15
GFI REGULATORS ................................................................... 15
MISC. REGULATORS ................................................................ 20
VALVES, PRDS, & PLUGS ........................................... 22
CYLINDER VALVES .................................................................. 22
QUARTER TURN/3-WAYS ........................................................ 28
CHECK VALVES ....................................................................... 30
PRDs & PLUGS ........................................................................ 31
MODULES, SOLENOIDS, & RELAYS ............................ 33
PRESSURE SENSORS ................................................. 38
FILTERS .................................................................... 39
INJECTORS ............................................................... 44
FUELING COMPONENTS ............................................ 47
RECEPTACLES ......................................................................... 47
FUELING NOZZLES .................................................................. 52
BREAKAWAY COUPLINGS ....................................................... 54
ELECTRICAL HARNESSES .......................................... 55
GAUGES .................................................................... 58
MISC. PARTS ............................................................ 59
1
FITTINGS Female SAE x Male NPT Adapter
(SS-6404)
SAE Countersunk plug
(SS-6408)
Female SAE x Male SAE Adapter
(SS-6410)
37o AN x Female NPT Adapter
(SS-2405)
Male NPT x Male SAE Adapter
(SS-6401)
37o AN x Male NPT Adapter
(SS-2404)
Male SAE x Male SAE (SS-6464)
37o AN x Male SAE Adapter
(SS-6400)
SAE Plug (SS-6408-HHP)
Hex Nipple (SS-5404)
2
Hex Coupling Female Pipe Thread (SS-1405)
Branch Tee (SS-5604)
Pipe Plug (SS-5406)
Male Tee (SS-5600)
Female Pipe Thread x Male Pipe Thread Adapter (SS-4505)
Pipe Cross (SS-5652)
Reducing Bushing (SS-5405)
Elbow (SS-5504)
Pipe Tee (SS-5605)
45o Elbow (SS-5505)
Street Tee (SS-5602)
Male Elbow (SS-5500)
3
Street Elbow (SS-5502)
45o Street Elbow (SS-5503)
90o Male Tube x Male Pipe
(SS-2501)
90o Male Tube x Female Pipe (SS-
2502)
Male Tube Union (SS-2403)
Reducer & Expander Female Tube x Male Tube (SS-2406)
45o Male Tube x Male Pipe
(SS-2503)
45o Male Tube (SS-2504)
90o Male Tube (SS-2500)
Tee Male Tube Ends x Male Pipe Center (SS-2601)
4
Tee Male Tube Ends x Female Pipe Center (SS-2602)
Cross Male Tube (SS-2650)
Tee Male Tube (SS-2603)
Male Tube x Bulkhead Tube (SS-2700)
Tee Male Tube End/Center x Male Pipe End (SS-2605)
90o Male Tube x Bulkhead Tube (SS-2701)
Tee Male Tube End/Center x
Female Pipe End (SS-2606)
45o Male Tube x Bulkhead Tube
(SS-2702)
5
Tee Male Tube Ends x Bulkhead Tube Center (SS-2703)
Tee Male Tube End/Center x Bulkhead Tube End (SS-2704)
Bulkhead Tube x Male Pipe
(SS-2706)
6
TUBE FITTINGS TUBE TO MALE PIPE
Male Connector (MC)
Bulkhead Male Connector (BMC)
Male Elbow - ISO Tapered
(MERT)
Male Branch Tee (MBT)
45o Male Elbow (M45E)
Male Run Tee (MRT)
Male Elbow (ME)
7
TUBE FITTINGS TUBE TO FEMALE PIPE
Female Connector (FC)
Bulkhead Female Connector (BFC)
Female Run Tee (FRT)
Female Branch Tee (FBT)
Female Elbow (FE)
8
TUBE FITTINGS
TUBE TO TUBE UNION
Union (U)
Bulkead Union (BU)
Bulkhead Reducing Union (BRU)
Reducing Union (RU)
Union Elbow (UE)
Union Cross (UCS)
Union Tee (UT)
Reducing Union Tee (RUT)
Dielectric Adapter (DA)
9
TUBE FITTINGS TUBE CONNECTORS/ADAPTERS
Bulkhead Reducer/Adapter (BR)
Female Adapter (FA)
Reducer/Adapter (R)
Port Connector (PC)
Male Adapter (MA)
Reducing Port Connector (RPC)
Female Adapter (FA)
10
TUBE FITTINGS DUOLOK TO 37O FLARE (AN)
AN Union (ANU)
AN Bulkhead Union (ANBU)
Female AN Adapter (ANF)
AN Adapter (ANA)
11
TUBE FITTINGS TUBE TO O-RING FACE SEAL
O-Ring Seal Male Connector (OMC)
O-Ring Seal Male Striaght Thread Connector (OSC)
12
TUBE FITTINGS TUBE TO SAE
Male Connector - Straight Thread Boss (MCST)
Male Adapter - Straight Thread Boss (MAST)
Male Run Tee - Straight Thread
Boss (MRTST)
Male Branch Tee - Straight
Thread Boss (MBTST)
Male Elbow - Straight Thread
Boss (MEST)
45o Male Elbow - Straight Thread
Boss (M45EST)
13
TUBE FITTINGS CAP AND PLUG
Cap (C)
Plug (P)
14
TUBE FITTINGS COMPONENTS
Nut (N)
Back Ferrule (BF)
Ferrule Set (FS)
Front Ferrule (FF)
Tube Insert (TI)
Bulkhead Locknut (BN)
15
REGULATORS GFI REGULATORS
P90-900 Regulator
100 PSI
INLET: 3/8”
NO SOLENOID
PRESSURE TRANSDUCER
REPLACES: P90-900, P71-100
FORD PN: 2L3Z-9C968-AB
P242-100 Regulator, 6.5 bar
94 PSI
INCLUDES CONNECTOR KIT P214-105
INLET: 3/8”
PRESSURE TRANSDUCER
SOLENOID: 12V
P220-100 Regulator
110 PSI
INCLUDED CONNECTOR KIT P214-105
INLET: 3/8”
PRESSURE TRANSDUCER
SOLENOID: 12V
16
P101-400 Regulator
145 PSI
INLET: 3/8”
PRESSURE TRANSDUCER
SOLENOID: 12V
P73-910 Regulator
100 PSI
INLET: 1/4”
PRESSURE TRANSDUCER
NO SOLENOID
P77-100 Regulator
115 PSI
INLET: 3/8”
NO PRESSURE TRANSDUCER
SOLENOID: 12V
17
P74-400 Regulator
120 PSI
ALL CHRYSLER CNG VEHICLES
INLET: 3/8”
SOLENOID: 12V
NO PRESSURE TRANSDUCER
P214-550 Regulator, 9 bar
130 PSI
INLET: 9/16-18 SAE (#6 ORING)
PRESSURE TRANSDUCER
SOLENOID: 12V
P101-500 Regulator
130 PSI
INLET 3/8”
NO PRESSURE TRANSDUCER
SOLENOID: 12V
18
P101-200 Regulator
150 PSI
INLET: 3/8”
SOLENOID: 12V
NO PRESSURE TRANSDUCER
REPLACES: P101-300
P41-100 Regulator
180 PSI
INLET: 3/8”
PRESSURE TRANSDUCER
SOLENOID: 12V
P242-206 Regulator, 6.5 bar
95 PSI
PRESSURE SENSOR
SOLENOID: 12V
19
P214-880 Regulator, 8.5 bar
125 PSI
PRESSURE SENSOR
SOLENOID: 12V
P3-100A Regulator
120 PSI
INLET: 3/8”
NO PRESSURE TRANSDUCER
SOLENOID: 12V
P214-100 Regulator, 5.5 bar
80 PSI
INLET: 9/16-18 SAE (#6)
PRESSURE TRANSDUCER
INLET FILTER
SOLENOID: 12V
INCLUDES CONNECTOR KIT P214-105
20
REGULATORS MISC. REGULATORS
HPR3600 High Pressure Regulator, 3600 psi FUEL TYPE: CNG
INLET PRESSURE: 3600 PSI OUTLET PRESSURE: 150 ± 20 PSI PRD OUTLET: 400 PSI
LENGTH: 5.21” DIAMETER: 2.85”
FUEL INLET: 3/8” NPT FUEL OUTLET: 1/4” NPT WATER IN/OUT: 1/4” NPT
WATER IN/OUT HOSE BARS: 5/8” OD MTG THREAD: 1-18 HEX, 3/4”-16 UNF
APPLICATIONS: STATIONARY, MOBILE, INDUSTRIAL, & AUTOMOTIVE
ITT130 & ITT150 Regulator
OUTLET PRESSURE OPTIONS: 130 OR
150 PSI
1/4 NPT MALE CAPTURE PIPE PRD
INLET: 9/16-18 SAE (#6 ORING)
OUTLET: 3/4-16 SAE (#8 ORING)
NO THERMOSTAT
NO SENSOR PORT
270 PSI PRD (STANDARD)
REGULATOR PRD IS NOT SUITABLE AS A
STAND ALONE SAFETY RELIEF VALVE
ITT8165-5 Regulator
OUTLET PRESSURE: 110 PSI
1/4 NPT MALE CAPTURE PIPE PRD
INLET: 9/16-18 SAE (#6 ORING)
OUTLET: 3/4-16 SAE (#8 ORING)
NO THERMOSTAT
NO SENSOR PORT
270 PSI PRD (STANDARD)
REGULATOR PRD IS NOT SUITABLE AS A
STAND ALONE SAFETY RELIEF VALVE
21
BLKSTN CNG Regulator, With Pressure Sensor
SOLENOID: 12V PRESSURE TRANSDUCER (0-5000 PSI)
INLET PORT: 9/16-18 SAE (#6 ORING) DUAL OUTLET PORT: 3/4-16 SAE (#8
ORING)
THE FITTINGS (OUTLET & INLET) & WIRING HARNESSES ARE SOLD SEPARATELY
THE OUTLET PRESSURE SETTING IS FACTORY ADJUSTED TO YOUR SPECIFICATION(S)
BLKSTN-NS CNG Regulator, No Pressure Sensor
SOLENOID: 12V NO PRESSURE TRANSDUCER INLET PORT: 9/16-18 SAE (#6 ORING)
DUAL OUTLET PORT: 3/4-16 SAE (#8 ORING) THE FITTINGS (OUTLET AND INLET) & WIRING
HARNESSES ARE SOLD SEPARATELY THE OUTLET PRESSURE SETTING IS FACOTRY
ADJUSTED TO YOUR SPECIFICATION(S)
EVR110 & EVR135 CNG Regulator
110 OR 135 PSI
INLET PORT: 9/16-18 MALE JIC (#6) OUTLET PORT: 1/2-20 SAE (#5 ORING)
PRESSURE TRANSDUCER LOCK OFF SOLENOID INCLUDES NEW EXTERNAL PRESSURE
RELIEF DEVICE ADDITIONAL FITTINGS OR WIRING
HARNESSES SOLD SEPARATEL
22
VALVES, PRDS, & PLUGS CYLINDER VALVES
1706X1M Electronic Solenoid Cylinder Valve INCLUDES PRD OPERATING PRESSURE: 0-3600 PSI OPERATING TEMP: -40oF TO 180oF VOLTAGE: 12V
CONNECTIONS: (2) 9/16-18 SAE (#6 ORING) (THRU
PORT) 7/16-20 SAE (#4 ORING) 2”-12 UNF
1705X2 Electronic Solenoid Cylinder Valve
INCLUDES PRD & PRESSURE SENSOR
MAX PRESSURE: 3600 PSI OPERATING TEMP: -40oF TO 180oF
FORD PN: 2L3Z-9F954-BD
CONNECTIONS: (2) 9/16-18 SAE(#6 ORING)(THRU
PORT) 7/16-20 SAE (#4 ORING)
2”-12 UNF
1731X2 Solenoid Line Valve
FUEL: CNG (HYDROGEN ALSO AVALIABLE)
OPERATING PRESSURE: 250-3600 PSI
FUEL FLOW RATE: CV 1.25 NOMINAL OPERATING TEMP: -40oF TO 250oF
VOLTAGE: 12V
23
1706B CNG Internal Solenoid Valve
OPERATING PRESSURE: 0-3600 PSI OPERATING TEMP: -40oF TO 180oF
CONNECTIONS: 9/16-18 SAE (#6 ORING)
(2) 7/16-20 SAE (#4 ORING) 2”-12 UNF
1705X14 Internal Solenoid Tank Valve
INCLUDES PRD OPERATING PRESSURE: 0-3600 PSI OPERATING TEMP: -40oF TO 180oF
CONNECTIONS: (2) 9/16-18 SAE (#6 ORING)
7/16-20 SAE (#4 ORING) 2”-12 UNF
1705X4 Internal Solenoid Tank Valve
OPERATING PRESSURE: 3600 PSI OPERATING TEMP: -40oF TO 180oF PORT: 2”-12 UNF
24
1705X2 Solenoid Tank Valve
INCLUDES PRD & SENSOR OPERATING PRESSURE: 0-3600 PSI OPERATING TEMP: -40oF TO 180oF CONNECTION: 2”-12 UNF
P1700-50 Tool, Internal Solenoid Valve Override
APPLICATION: FOR DEFUELING
GFI/IMPCO CANADA SOLENOID VALVES
T6-300 Heavy Duty Manual Tank Valve
MAX WORKING PRESSURE: 7500 PSI SUITABLE FOR USE WITH:
HYDROGEN, CNG, COMPRESSED
AIR, INERT GAS, OXYGEN, & METHANE
CONNECTIONS: INLET/OUTLET: 9/16-18 SAE (#6
ORING) PRD PORT: 5/8-18 UNF
1-1/16”-12 UNF
25
V-5000-001 Valve, Electronic Cylinder; LYRA
INCLUDES HARNESS H-0000-01 INTEGRATED ALLOY PRD APPLICATION: MEDIUM & HEAVY DUTY
CONNECTIONS: CYL: 1-1/8”-12 UNF LIVE PORT: 9/16”-18 SAE (#6 ORING) INLET/OUTLET: 9/16”-18 SAE (#6 ORING)
PRD: 1/2-20 SAE (#5 ORING)/8MM
REFUELING/ENGINE PORT: 7MM
V-5000-002 Valve, Electronic Cylinder; VEGA
INCLUDES HARNESS H-0000-01 INTEGRATED ALLOY PRD APPLICATION: MEDIUM DUTY
CONNECTIONS: CYL: 1-1/8-12 UNF INLET/OUT: 9/16”-18 SAE(#6
ORING)
PRD: 1/2-20 SAE (#5 ORING)/8MM REFUELING/ENGINE PORT: 7MM
LIVE PORT: NOT AVAILABLE
V-5000-06 Valve, Electronic Cylinder; ROTAREX
APPLICATION: LIGHT DUTY PIGTAIL HARNESS SOLD SEPARATELY
UPON REQUEST
CONNECTIONS: INLET: 1-1/8 -12 UNF OUTLET: 9/16-18 SAE (#6 ORING) PRD: 3/8” MNPT
26
V-5000-522 Valve, Electronic Solenoid; EMER
MAX PRESSURE: 4500 PSI OPERATING TEMP: -40oF TO 85oF SOLENOID: 12V APPLICATION: LIGHT DUTY
CONNECTIONS: INLET: 1-1/8 -12 UNF OUTLET: 9/16-18 SAE (#6 ORING) PRD: 9/16-18 SAE (#6 ORING)
V-5000-525 Valve, Electronic Solenoid; EMER
MAX PRESSURE: 4500 PSI OPERATING TEMP: -40oF TO 85oF SOLENOID: 12V APPLICATION: MEDIUM & LIGHT DUTY
CONNECTIONS: INLET: 3/4”-14 NGT OUTLET: 1/4” NPT PRD: 9/16-18 SAE (#6 ORING)
V-5000-003 Valve, Manual Cylinder; BETA
EUTECTIC ALLOY PRD NO EXCESS FLOW LIMITER AVAILABLE
IN HIGH FLOW VERSION MAX PRESSURE: 260 BAR APPLICATION: MEDIUM & HEAVY DUTY
CONNECTIONS: CYL: 1-1/8 -12 UNF
INLET/OUT: 9/16”-18 SAE (#6 ORING) PRD: 1/2-20 SAE (#5 ORING)/8MM REFUELING/ENGINE PORT: 7MM LIVE PORT: NOT AVALIABLE
27
V-5000-005 Valve, Manual; SHERWOOD
APPLICATION: LIGHT, MEDIUM, & HEAVY DUTY CONNECTIONS:
OUTLET: 7/16”-20 FNPT PRD: .650-16 UNF CYLINDER: 1-1/8 UNF
28
VALVES, PRDS, & PLUGS QUARTER TURN/3-WAYS
S-1000-61 Quarter Turn High Pressure Ball Valve
1/4” FNPT 6000 PSIG STAINLESS STEEL
S-1000-129 Quarter Turn High Pressure Ball Valve
3/8” COMPRESSION 6000 PSIG STAINLESS STEEL
S-1000-107 Quarter Turn High Pressure Ball Valve
1/4” COMPRESSION 6000 PSIG STAINLESS STEEL
29
S-1000-130 3-Way Valve
3/8” COMPRESSION 6000 PSIG STAINLESS STEEL
S-1000-62 3-Way Valve
1/4” MNPT 6000 PSIG STAINLESS STEEL
30
VALVES, PRDS, & PLUGS CHECK VALVES
S-1000-36 High Pressure Check Valve
3/8” COMPRESSION #1 PSI SPRING, ETHYLENE
PROPYLENE 6000 PSIG STAINLESS STEEL
S-1000-96 High Pressure Check Valve 3/8” 37 DEG JIC (#6 MALE JIC X #6 FEMALE JIC) #1 PSI SPRING, ETHYLENE
PROPYLENE 6000 PSIG STAINLESS STEEL
S-1000-34 High Pressure Check Valve
BOTH CONNECTIONS: 1/4” FNPT #1 PSI SPRING, 6000 PSIG STAINLESS STEEL
31
VALVES, PRDS, & PLUGS PRDs & PLUGS
P1750-30W Pressure Relief Device (PRD), Piston Style
IN-LINE APPLICATIONS OPERATING PRESSURE: 3600 PSI FLOW RATE: 50 SCF/MIN ACTIVATION TEMP: 217oF OR 255oF
CONNECTIONS: 1/2” SAE FLARE .650-19 UNS-3B
V-5000-220 Pressure Relief Device (PRD)
CONNECTION: 1/4”-18 NPT LENGTH WHEN INSTALLED: 40MM
V-5000-221 Pressure Relief Device (PRD)
CONNECTION: 9/16-18 SAE (#6
ORING) LENGTH WHEN INSTALLED: 68.9MM
32
PRD-4E Pressure Relief Device (PRD), End Plug
CYLINDER CONNCETION: 1-1/8 -12 UNF VENT PORT: 3/4-16 SAE(#8 ORING)/(11MM) PRD VENT PORT CV: 2.4 GAL/MIN/PSI MAX WORKING PRESSURE: 4500 PSIG VENTING PORT CO-AXIAL TO THE TANK LEAD-FREE FUSIBLE ELEMENT HIGH FLOW CAPACITY
L-5000-001 Cylinder End Plug
CONNECTION: 1.125-12UNF
33
MODULES, SOLENOIDS,
& RELAYS
EV1000 IDM/Fuel Driver
OPERATES INJECTORS AND FEUL
GAUGE ONE CONNECTOR HAS 2 WIRES:
POWER AND GROUND THE OTHER CONNECTOR IS A 24 PIN
CONNECTOR: FUEL GAUGE DRIVER AND INJECTOR DRIVER CIRCUITS
EV1001 Fuel Gauge Driver Module
ONLY OPERATES FUEL GAUGE ONE CONNECTOR HAS 2 WIRES:
POWER AND GROUND THE OTHER CONNECTOR IS A 24 PIN
CONNECTOR: FUEL GAUGE IN INSTUMENT CLUSTER
B-202031 Module, High Resolution
12 PIN CONNCETOR: SERVICES FUEL
GAUGE HARNESS MAY BE NEEDED WHEN
REPLACING FUEL DRIVER MODULE
(HAR-B-107)
34
A3-300 Fuse Relay Module
CONNECTS TO: MAIN HARNESS POWER FUEL PUMP OR INJECTORS
EXTRA RELAY
FORD PN: YC3Z-14B239-AA
A3-478 Fuse Relay Module
CONNECTS TO: MAIN HARNESS POWER FUEL PUMP OR INJECTORS
FORD PN: YC3Z-14B239-AA
EV3100 Digital Fuel Gauge Kit
MORE ACCURATE DIGITAL PSI
READER LOCATED IN DASH FOR USE WITH IMPCO SYSTEM ONLY
35
A1115PFL236C Fuel Gauge Module Assembly, Freightliner
PROGRAMMED FOR FREIGHTLINER
APPLICATION
INCLUDES: CNG PIGTAIL HARNESS, 8” MODULE CNG CABLE ASSEMBLY PRESSURE SENSOR
A111036CNEO Fuel Gauge Module Assembly with Gauge
MORE GENERALIZED APPLICATION
INCLUDES: CNG PIGTAIL HARNESS, 8” CONTROL CENTER CNG CABLE ASSEMBLY PRESSURE SENSOR GAUGE
A1-121 Low Pressure Lock-off Solenoid
WORKING PRESSURE: 312 PSI COMPACT DESIGN VOLTAGE: 12V PORTS: 1/4” NPT TEMPREATURE RANGE: -40oF TO 250oF OR
170o FLUID APPLICATION: RATED FOR USE WITH FUEL,
AIR, & OTHER MEDIA ENGINEERED FOR USE IN AUTOMOTIVE,
INDUSTRIAL, & REFRIDGERATION
36
A1-123 Low Pressure Lock-off Solenoid
WORKING PRESSURE: 312 PSI VOLTAGE: 12V PORTS: 1/4” NPT TEMPREATURE RANGE: -40oF TO
250oF OR 170o FLUID APPLICATION: RATED FOR USE ON LP
GAS, NATURAL GAS, FUEL, AIR, &
OTHER FLUIDS ENGINEERED FOR USE IN
AUTOMOTIVE, INDUSTRIAL, & REFRIDGERATION
A11-111 Multi-fuel Lock-off Valve WORKING PRESSURE: 130 PSI 2-WAY NORMALLY CLOSED INLINE
SOLENOID VOLTAGE: 12V INLET/OUTLET PORTS: 1/8” FEMALE
NPT TEMPREATURE RANGE: -40oF TO
250oF OR 170o FLUID APPLICATION: RATED FOR USE WITH
FUEL, AIR, & OTHER MEDIA ENGINEERED FOR USE IN
AUTOMOTIVE, INDUSTRIAL, TEMPERATURE, & DISPENSING
CONTROL
A1-161 Low Pressure Lock-off Valve WORKING PRESSURE: 150 PSI COMPACT DESIGN HIGH FLOW SOLENOID VOLTAGE: 12V PORTS: 1/4” NPT TEMPREATURE RANGE: -40oF TO 250oF OR
170o FLUID APPLICATION: RATED FOR USE WITH FUEL,
AIR AND OTHER MEDIA ENGINEERED FOR USE IN AUTOMOTIVE,
INDUSTRIAL & REFRIDGERATION
37
A1-211B High-Pressure Lock-off Valve
RATED UP TO 3600 PSI BUBBLE-TIGHT LEAKAGE DOWN TO 40 PSI ENCAPSULATED COIL OPREATES IN DIRTY OR WET GAS VOLTAGE: 12V PORTS: 9/16-18 SAE (#6 ORING) TEMPREATURE RANGE: -40oF TO 250oF APPLICATION: COMPATIVLE WITH A WIDE
RANGE OF GASEOUS FUELS ENGINEERED FOR HIGHPRESSURE TANK
APPLICATIONS
A6-852 Solenoid Coil
VOLTAGE: 12V AMP CONNECTION USED ON OMB VALVES & GFI
REGULATORS
B-202033 Solenoid Coil
VOLTAGE: 12V REPLACEMENT FOR ROTAREX
REGULATOR & TANK VALVE
38
PRESSURE SENSORS P1-124P Pressure Sensor
PRESSURE RANGE: 0-3600 PSI OPERATING TEMP: -40oC TO 125oC CONNECTION: 3/8”-24 SAE LENGTH: 2.6” USED ON GFI REGULATORS
B-202009 Sensor, High Pressure
CONNECTION: 1/4” MNPT 3-PIN CONNECTOR M51
B-202020 Sensor, Low Pressure
CONNECTION: 7-16”-20 SAE (#4
ORING) 3-PIN CONNECTOR RAIL PRESSURE SENSOR
39
FILTERS FLTRA Filter, Coalescent Element
LENGTH: 71 MM DIAMETER: 23 MM GOES IN FLTRG
FLTRB Filter, Coalescent Element
LENGTH: 3 1/8” DIAMETER: 7/8” GRADE 10 MICRON GOES IN FLTRC
FLTRC Filter Assembly, High Pressure
INLET/OUTLET: 9/16-18 SAE (#6
ORING) LENGTH: 4 3/4” WIDEST DIAMETER: 2 1/4” USES FLTRB ELEMENT
40
FLTRF Filter, Coalescent Element
LENGTH: 2 3/4” DIAMETER: 7/8” RATED AT .01 MICRON W/ 95%
EFFICIENCY GOES IN FLTRH
FLTRD Filter, Coalescent Element
LENGTH: 2 3/8” DIAMETER: 13/16”
FLTRL Filter Element, High Pressure
LENGTH: 2 1/2” DIAMETER: 1 1/2”
41
FLTR113E Filter Element, High Pressure
GRADE 6 LENGTH: 5” DIAMETER: 1.5”
FLTR36 Filter, Low Pressure
LENGTH: 5 1/4” APPLICATION: FORD, ECONOLINE
2 CLAMPS NEEDED FOR EACH FILTER
L-0026
A3-546 Filter, Low Pressure
INLET/OUTLET: 1/2” FEMALE FLARE LENGTH: 5” GM# 52371563
42
A3-514 Filter, LPG
INLET/OUTLET: 3/8” DEG MALE JIC LENGTH: 6.11” LEACK TEST: 200 PSI FORD PN: YC3Z-9155-DA BURST PRESSURE: 1800 PSI
TSF1 CNG – ECE WEH Filter 3600 psi
FOR FUELING STATIONS AS
PREFILTER 40 MICRON 3600 PSI
FITTING CHOICES:
FEMALE THREAD/ MALE THREAD UNF
9/16”-18 LH FEMALE THREAD/MALE THREAD UNF
9/16”-18 MALE THREAD UNF 9/16”-18 ON BOTH
SIDES
TSF5 CNG – PED WEH Filter 3600 psi
FOR FUELING STATIONS AS
PREFILTER (PED) MALE THREAD/FEMALE THREAD DN 8
MM 50 MICRON 3600 PSI
43
TGT 8500 Series filter, 5000 psi
LARGE FILTER ASSEMBLY TGT-A8519C-N.3MA-BS6
LARGE REPLACEMENT FILTER TGT-284C.3MAN
SMALL FILTER ASSEMBLY TGT-A8515C-N.3MA-BS6
SMALL REPLACEMENT FILTER
TGT-233C.3MAN
TGT-F610 - TGT Grade 10 Coalescing Filter, 5000 psi
COALESCING FILTER ASSEMBLY TGT-F610
COALESCING REPLACEMENT FILTER TGT-F610-KIT
IMPROVED DESIGN HAS HEX NUT
BUILT IN FOR EASY REMOVAL AND MAINTENANCE
44
INJECTORS
INJ827 Injector, Fuel, NGI-2
BOSCH CNG INJECTOR NGI-2 LENGTH: 80 MM BOSCH PN: 0280158827 4.6 OHM 1700 CC, JETRONIC CONNECTOR
INJ821 Injector, Fuel, CNG
BOSCH CNG INJECTOR NGI-2 8.5 OHM LENGTH: 2” (50 MM) BOSCH PN: 0280158821
INJ842 Injector, Fuel, CNG
BOSCH CNG INJECTOR NGI-2 JETRONIC CONNECTOR, O-O 34MM LENGTH: 2” BOSCH PN: 0280158842
45
INJ844 Injector, Fuel, NGI-2
BOSCH CNG INJECTOR NGI-2 LENGTH: 2” BOSCH PN: 0280158844
INJ0959 Injector Set
DOUBLE INJECTOR, IN HOUSING APPLICATION: FORD, ECONOLINE INJECTOR SET WITH SENSOR
INCLUDED: INJ0960
INJ0980 Injector
SINGLE INJECTOR APPLICATION: FORD, ECONOLINE
46
N1-361 Injector Sleeve Assembly, Set of 8
INJECTOR ADAPTOR PROPANE FORD PN: YL3Z-9G512-BA
R1-202 Low Flow Injector Replacement Kit
ALL PARTS NECESSARY FOR REMOVAL & INSTALLATION OF
COMPUVALVE LOW FLOW INJECTOR ASSEMBLY
NO COOLANT LOCK-OFF FORD PN: 2L3Z-9H529-AA
APPLICATIONS: FORD CNG BI-FUEL F150 1996-
2002 FORD LPG BI-FUEL F150 2000-2002
INCLUDES: LOW FLOW INJECTOR ASSEMBLY ORING, FUEL RAIL SEAL
(2) SCREW, #8-32 UNC
TIE, CABLE R1-131 LOW FLOW INJECTOR REPLACEMENT KIT
KIT INCLUDES ALL HARDWARE
NEEDED TO COMPLETE REPLACEMENT OF LOW FLOW INJECTORS
INCLUDES: LOW FLOW INJECTOR ASSEMBLY ORING, FUEL REAIL SEAL (2) SCREW, #8-32 UNC
TIE, CABLE
47
FUELING COMPONENTS RECEPTACLES
TN1 CNG – NGV1 WEH Receptacle 3600 psi
CARS 3600 PSI WITH FEMALE THREAD UNF 9/16”-18
TN1 CNG – NGV1 WEH Receptacle 3600 psi
CARS 3600 PSI 40 MICRON FILTER
FITTING CHOICES:
WITH TUBE Ø 1/4” WITH TUBE Ø 3/8” WITH TUBE Ø 1/2”
TN5 CNG – NGV2 WEH Receptacle 3600 psi
BUS/TRUCK (ECE) 3600 PSI
FITTING CHOICES:
WITH TUBE Ø 1/2” WITH TUBE Ø 12 WITH TUBE Ø 16 WITH FEMALE THREAD UNF 7/8”-14
48
CAP1 Fill Receptacle Cap
STANDARD DUST CAP
CAP2 Fill Receptacle Cap, Electronic Dust Cover
USED FOR STARTER INTERRUPT
REC36P Receptacle, Fuel; 3600 psi
CONNECTION: 9/16-18 SAE (#6) LENGTH: 1.6” PRESSURE: 3600 PSI DUST CAP SOLD SEPARATELY
49
REC36L Receptacle, Fuel; 3600 psi
INCLUDES DUST CAP CONNECTION: 9/16-18 SAE (#6) LENGTH: 2” PRESSURE: 3600 PSI NGV1 RECEPTACLE WITH 3/4” FLATS
REC30L Receptacle, Fuel; 3000 psi
INCLUDES DUST CAP CONNECTION: 9/16-18 SAE (#6) LENGTH: 2” PRESSURE: 3000 PSI NGV1 RECEPTACLE WITH 3/4” FLATS
REC30E Receptacle, Fuel, W/ Bulkhead; 3000 psi
INCLUDES DUST CAP CONNECTION: 9/16-18 SAE (#6) LENGTH: 2 5/8” PRESSURE: 3000 PSI NGV1 RECEPTACLE W/ BULKHEAD &
FILTER
50
REC36D Receptacle, Fuel; 3600 psi
INCLUDES DUST CAP LENGTH: 2.56” PRESSURE: 3600 PSI CONNECTION: 9/16-18 SAE (#6) NGV1 RECEPTACLE W/ BULKHEAD
RECC36HF Receptacle, Fuel, High Flow; 3600 psi
INCLUDES DUST CAP 2-PIECE TN5 RECEPTACLE PRESSURE: 3600 PSI CONNECTION: 1/2” COMPRESSION
W/ BULKHEAD LENGTH: 4 1/2” DOES NOT INCLUDE INTEGRATED
FILTER
REC50CL Receptacle, Fuel, High Flow, Heavy Duty
INCLUDES STANDARD DUST CAP CONNECTION: 5/8” COMPRESSION
(DOUBLE FERRULE) SERVICE PRESSURE: 3600 PSI MAWP: 5000 PSI WEIGHT: 1.29 LBS LENGTH: 4.8”
FOR USE ON EXTREMELY HIGH-FLOW, HEAVY-DUTY APPLICATIONS
INCLUDING QUICK-FILL, SELF-SERVICE FUELING OF TRANSIT BUSES & LARGE TRUCKS
51
1708X2 Receptacle, CNG Fill Valve
CONNECTION: 11/16-16 SAE FOR
3/8 FACE SEAL GM PN: 52370380 QUANTUM PN: 101992 REV. B
H2F2S Offlad, Receptacle
CONNECTION: 1/4” MNPT
2HF2S Offload, Nozzle
CONNECTION: 1/4” MNPT
52
FUELING COMPONENTS FUELING NOZZLES
TK4 CNG – NGV1 WEH Fueling Nozzle, 3600 psi
SINGLE HOSE SYSTEM FOR FAST FILLING OF CARS (NGV1) UNF 9/16”-18 INTERNAL THREAD
(SAE J926) 250 BAR
TK 10 CNG – NGV1 WEH Fueling Nozzle, 3600 psi FOR FAST FILLING OF CARS (NGV1) 250 BAR
GRIP OPTIONS:
45o 45o WITH GAS RECIRCULATION 90o 90o WITH GAS RECIRCULATION
TK16 CNG – NGV1 WEH Fueling Nozzle, 3600 psi
SELF-SERVICE TWIN HOSE SYSTEM FOR FAST FILLING OF CARS (NGV1) 250 BAR
53
TK17 CNG – NGV1 WEH Fueling Nozzle, 3600 psi
SINGLE-HANDED OPERATION TWIN HOSE SYSTEM FOR FAST FILLING CARS (NGV1) 250 BAR
TK22 CNG – NGV2 WEH Fueling Nozzle, 3600 psi
SINGLE HOSE SYSTEM FOR FAST FILLING OF BUSES AND
TRUCKS (NGV2) 250 BAR
TK24 CNG – NGV2 WEH Fueling Nozzle, 3600 psi
EXTERNAL 3-WAY VALVE FOR FAST FILLING BUSES AND
TRUCKS (NGV2) SPECIFY WITH OR WITHOUT GAS
RECIRCULATION WHEN ORDERING 250 BAR
TK26 CNG – NGV2 WEH Fueling Nozzle, 3600 psi SELF-SERVICE TWIN HOSE SYSTEM FOR FAST FILLING OF BUSES AND
TRUCKS (NGV2) 250 BAR
54
FUELING COMPONENTS BREAKAWAY COUPLINGS
TGT-6ILB Fill breakaway, 3600 psi
DURABLE STAINLESS STEEL AND ALUMINUM
CONSTRUCTION MAY BE RECONNECTED MAXIMIZES FLOW FOR ALL NGV1 TYPE 1 AND TYPE
2 NOZZLES 3600 PSI TEMP. RANGE: -40oC TO 85oC DISCONNECTION FORCE: 150 LBS
TGT-VLB Return Breakaway, 3600 psi
DURABLE STAINLESS STEEL AND ALUMINUM
CONSTRUCTION MAY BE RECONNECTED MAXIMIZES FLOW FOR ALL NGV1 TYPE 1 AND TYPE
2 NOZZLES 3600 PSI TEMP. RANGE: -40oC TO 85oC DISCONNECTION FORCE: 150 LBS
55
ELECTRICAL HARNESSES HAR-B-061 Harness, Injector Pigtail
LENGTH: 4 1/4” OEM INJECTOR (USCAR CONNECTOR)
TO BOSH INJECTOR CONNECTOR USED WITH INJ827
HAR-I-335 Harness, Injector Pigtail
LENGTH: 4 3/8” OEM INJECTOR (USCAR CONNECTOR)
TO BOSCH INJECTOR CONNECTOR USED WITH INJ827
HAR-I-691 Harness
POWER & GROUND SUPPLY USED WITH EV1000 & EV1001
56
HAR-B-071 Harness, Solenoid Adapter
LENGTH: 6 1/4” ADAPTER FOR ROTAREX REGULATOR
SOLENOID (BLACK)
HAR-I-699 Harness, Injector Pigtail
LENGTH: 5” OEM INJECTOR (USCAR CONNECTOR)
TO INJECTOR CONNECTOR USED WITH INJ821 & INJ842
H-0000-01 Harness
USED WITH OMB VALVES,
BLACKSTONE REGULATORS, & MORE APPLICATIONS
57
HAR-B-107 Harness, Fuel Gauge
USED WITH HIGH RES. MODULE (B-
202031)
HAR-D-124 Harness, Pigtail Adaptor
FUEL INJECTOR PIGTAIL CENTER SET INDEX EXTERNAL SPRING CLIP RETAINER APPLICATION: LUCAS, BOSC,
ROTAREX, DOMESTIC, IMPORT
58
GAUGES
A1GAUGE1 Gauge, High Pressure; Back Mounted
CONNECTION: 1/4” MNPT PRESSURE RANGE: 0-5000 PSI
A1GAUGE2 Gauge, High Pressure; Bottom Mounted
CONNECTION: 1/4” MNPT PRESSURE RANGE: 0-5000 PSI
A1GAUGE3 Gauge, Low Pressure; Back Mounted
CONNECTION: 1/4” MNPT PRESSURE RANGE: 0-300 PSI
GR-PRESS-04 Gauge, 0-4000 psi
CNG PRESSURE GAUGE 0-4000 PSI WITH WARNING 2-1/16”
59
MISC. PARTS P1702-35A Cylinder Valve Connector
MANUAL ELECTRICAL GAS
CONNECTOR ON FUEL TANK SOLENOID VALVE
FORD PN: F4TZ-9N957-AA
Copper Washers
Grommets & O-Rings
60
B-801037 Silicone Cap
INTERNAL VENTED VALVE END CAP ID: 30MM
LINER/ LINER2 Rubber, Tank Liner, Neoprene
LINER: ID: 2.05”
OD: 2.375” THICKNESS: 0.38”
LINER2: ID: 2.55”
OD: 2.75” THICKNESS: 0.38”
LINER 4 Rubber, Tank Liner, Neoprene
LINER4: ID: 2.8” OD: 3.13”
THICKNESS: 0.52”
SOLD BY THE FOOT
61
Replacement Labels
