MAGNETIC PARTICLE TEST REPORT Based on ASTM E-1444 (As revised)

RECEIVING INSPECTION

Part Name/Position

Part Number: Serial Number: A/C Model: A/C Tail:

Date: Customer: Work Order: Task Card:

SYSTEM PERFORMANCE CHECK: (IAW NDT

PROCEDURES MANUAL)

PASS NOT PASS

NDT Inspection technique, specification, standard or reference.

EQUIPMENT AND MATERIALS

Part Coating:

Yes No

Material: Geometry: Length: With (Diameter): Depth:

Pre/post

cleaning

Type:

Brand:

Magnaflux Other:_________

Application: Drying Time:

MT

equipment

used

Name:

Portable Machine

Yoke

Stationary Machine

Other:_____________________

Brand:

Magnaflux

Other:_______

Model:

Y-7

AD-945

P-1000

AD-2045

Other:_______

P/N:___________

S/N:___________

Cal Expiration

Date:

Bath/Dry

particle

Wet fluorescent M.T Particle

Brand: Magnaflux Other:_____________

Suspension: Oil Water

Bath

Concentration:

Dry Visible:

Brand:

Magnaflux

Other:________

Lighting

Black Light

P/N: __________________S/N:__________________

Intensity:_______________ Distance:_____________

When PORTABLE BLACK LIGHTS be used for remote

inspections. Black light intensity shall be recorded before and

after the inspection, as per ASTM 1444 (as revised) Table 1.

P/N: OPTIMAX 365. S/N: 1715344

Initial intensity:____________; Final Intensity:_____________

Distance:_________________

Ambient Light at dark room.

Intensity: ________________________

Distance at surface of the part.

Visible Light at the Evaluation Room

Intensity: ________________________

Distance at surface of the part. Using visible MT inspection

technique

Light meter

Equipment

P/N:_____________S/N:_____________

Exp. Date:_________________________

Black Light Sensor

P/N: _______________ S/N:__________

Exp. Date:_________________________

White Light Sensor

P/N:_____________S/N:____________

Exp. Date: _______________________

OPERATING PARAMETERS

Parameters 1st Magnetization Shot 2nd Magnetization at Right Angle 3rd Magnetiz. (As required)

Type of Current (AC or FWDC)

Magnetization Technique

(Direct or Indirect)

Magnetic Field Direction

(Circular or Longitudinal)

Magnetizing Media

Current Level (A)

Field Strength Indicator Used.

Demagnetization Level Achieved

INSPECTION RESULTS

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

FORM QA-675/00-AEM-TS-F REV. 6.0

Inspector Name: __________________________Signature and stamp:_____________ DATE: Jun-25-2012