Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Threaded Valves Part Numbers FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
16 0200 - 11005 S S R R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 16 Threaded Valves
0025 1/4" 0100 1" 0250 2-1/2"
0038 3/8" 0125 1-1/4" 0300 3"
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -11A18 S20 & S20FS 11003 S70 & S90
11A00 S40 11A01 S51
11A04 S80 11034 HP6000
11005 S85 11033 HX10000
S
C
B
S
B
R V
T P
R T
G
- -N None M
C General Cleaning (S85 Only)
N None
H Vented Ball (S85 Only)
- -
Consult Factory
6 SeatsRPTFE
* Not all Sizes or Materials are available in all Models, consult factory or see price pages for offerings in each model
Bare Stem - Actuator Capable (HP6000 & HX10000)
S20, S20FS, S40, S80, S85, S70, S90, S82 Model Valves come standard with Lockable Lever
HP6000 and HX10000 Models are offered with a Lever or Bare Stem for the actuator capable versionOval Handle available for some models, see Specialty Products Section
PTFE (S51 Only)
PEEK (HP10000 Only)
PVDF (HP6000 Only)
PTFE (S51 Only)
Brass (S51 Only)
WCB Carbon Steel (S90 Only)
316 Stainless Steel
5 Ball & Stem
4 Body
Brass (Chrome Plated) Ball with Brass Stem (S51 Only)
316 Stainless Steel Ball with 316 Stainless Steel Stem
10Special
Features
(Optional)
NOTES:
S51 Model comes with standard with a Lever
7 Seals
8Service
Modification
9Ball
Modification
Graphite (S20FS Only)
RPTFE
PART NUMBER - VALVE SELECTION
2 Size*
3Base Code
(Model)
Example: 160200-11005SSRR-NN = 2" S85, Stainless Steel Body, Stainless Steel Ball and Stem, RPTFE Seats, RPTFE Seals
Website Link
Link to Brochure
Link to Brochure
Link to Brochure
Link to Brochure
Link to Brochure
Link to Brochure
Link to Brochure
Link to Brochure
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
5000-6000 -3Pcs- Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0100 - 11A00 S S R T - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 5000 / 6000 Model - 3 Piece Valves Brochure Link O&M Link
0025 1/4" 0100 1" 0250 2-1/2"
0038 3/8" 0125 1-1/4" 0300 3"
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
11A00 11A13
11A01
S
C
- -
- -
Not Available in this Model
316 Stainless Steel (5000)
WCB Carbon Steel (6000)
PART NUMBER - VALVE SELECTION
Example: 140100-11A00SSRT-NN = 1" 5000 with NPT (Threaded Ends), Stainless Steel Body, Stainless Steel Ball and Stem, RPTFE Seats, PTFE Seals.
2 Size*
3Base Code
Model/Ends
Model 5000/6000 w/ NPT Ends Model 5000/6000 w/ NPT x SW Ends
Model 5000/6000 w/ SW Ends
Website Link
5 Ball & Stem
6 Seats
4 Body
7 Seals
8Service
Modification
9Ball
ModificationN None
S 316 Stainless Steel Ball with 316 Stainless Steel Stem
R RPTFE
T PTFE
N None
10Special
Features
(Optional)
NOTES:
Stainless Steel Socketweld End Caps are made of CF3M (316L) materialStainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M5000/6000 Series valves come standard with a Lockable Lever
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Micro Pure -3Pcs- Part No FTUS18020100
Page 3
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0100 - 11003 L L T T - C N - 0001
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 Micro Pure 3 Piece Valves
0500 1/2" 0150 1-1/2" 0300 3"
0075 3/4" 0200 2" 0400 4"
0100 1" 0250 2-1/2"
- -
11003 11062
11004
J
U
J
U
- -
- -0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0210 Polished 8-12 Ra ???? Consult Factory
316L Stainless Steel Ball w/ 316 Stainless Steel Stem
L 316L (CF3M) Stainless Steel
PART NUMBER - VALVE SELECTION
Example: 140100-11003LLTT-CN-0001 = 1" S7500 with Tri-Clamp Ends, SS Body, Ball and Stem, PTFE Seats, PTFE Seals, General Cleaned, PTFE Cavity Fillers
2 Size*
3Base Code
(Model)
Model S7500 (Clamp Ends) Model S75/700 (Clamp End x Tube End)
Model S7700 (Tube Ends)
Brochure LinkWebsite Link O&M Link
4 Body
5 Ball & Stem L
6 Seats T PTFETFM 1600
UHMWPE
7 Seals T PTFETFM 1600
UHMWPE
S7500/S7700 Series valves come standard with Internal Surface Finish of 15-20 Ra Maximum Per SFV-1General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
9Ball
ModificationN None
10Special
Features
(Optional)
Oxygen Cleaned
H Vented Ball (Upstream)
NOTES:
S7500/S7700 Series valves come standard with a Lockable Lever
8Service
ModificationC General Cleaned X
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
7000-8000 Model -3Pcs- Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0200 - 11001 S S R R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 3 Piece Valves Website Link BrochureDM7000
DM8000Brochure
0025 1/4" 0100 1" 0250 2-1/2"
0038 3/8" 0125 1-1/4" 0300 3"
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2" 0600 6"
- -
11000 110M0
11001 110M1
11002 110M2
11023 110M3
11024 110M4
11013 110M7
11017 Model 7000/8000 w/ ANSI 150 Flanged Ends 110?? Special End Connection Combinations
S A Alloy 20
C
R U
J TFM 1600 T PTFE
K
R U
J TFM 1600 T PTFE
- -N None X
C General Cleaning
N None
H Vented Ball
- -0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0009 Polished to 30-35 Ra 0210 Polished 8-12 Ra ???? Consult Factory
0032 Polished to 20-25 Ra
Website Link7000 Model
8000 Model
General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
Special Materials of Construction are available on request.
10Special
Features
(Optional)
NOTES:
*Direct Mount Valves (DM7000/DM8000) are only Available in 1/2" - 2" Size Range. See Price Pages for sizes and End ConnectionsSpecial End Connections like other Schedule BW end caps are available on request - Consult FactoryNot all End Connections are available in all sizes - See price pages
7000 & 8000 Model Valves come standard with a Lockable Lever. DM7000 & DM8000 come bare stem.
A Alloy 20 Ball and Alloy 20 Stem
9Ball
Modification
Stainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
7
8Service
Modification
Oxygen Cleaning
SealsRPTFE UHMWPE
6 Seats
RPTFE UHMWPE
Tek-Fil
Model DM7000/DM8000 w/ BW Ends (Sch40)
PART NUMBER - VALVE SELECTION
Example: 140200-11001SSRR-NN = 2" 7000 with SW (Socketweld Ends), Stainless Steel Body, Stainless Steel Ball and Stem, RPTFE Seats, RPTFE Seals
2 Size*
3Base Code
(Model)
Model 7000/8000 w/ NPT Ends Model DM7000/DM8000 w/ NPT Ends
Model 7000/8000 w/ SW Ends Model DM7000/DM8000 w/ SW Ends
Model 7000/8000 w/ BW Ends
Model DM7000/DM8000 w/ Ext SW Ends
Model DM7000/DM8000 w/ Ext BW Ends (Sch40)
Model DM7000/DM8000 w/ ANSI 150 Flanged Ends
Model 7000/8000 w/ Extended SW Ends
Model 7000/8000 w/ Extended BW Ends (Sch40)
Model 7000/8000 w/ NPT x SW Ends
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem
4 Body316 Stainless Steel (7000 & DM7000)
WCB Carbon Steel (8000 and DM8000)
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Chlorine 8000 - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0100 - 11000 C H R R - C H
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 Chlorine Service Model 8000 - 3 Piece Valves
0025 1/4" 0100 1" 0250 2-1/2"
0038 3/8" 0150 1-1/2" 0300 3"
0050 1/2" 0200 2" 0400 4"
0075 3/4"
- -
11000 11013
11001 110??
- -
- -0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0009 Polished to 30-35 Ra 0210 Polished 8-12 Ra ???? Consult Factory
0032 Polished to 20-25 Ra
Technical Bulletin - TB1007 Chlorine Service Ball Valves
PART NUMBER - VALVE SELECTION
Example:140100-11000CHRR-CH = 1" 8000 with NPT Ends, Carbon Steel Body, Hastelloy C Ball and Stem, RPTFE Seats, RPTFE Seals, General Cleaned, Vented Ball
2 Size
3Base Code
(Model)
Model 8000 w/ NPT Ends Model 8000 w/ NPT x SW Ends
Model 8000 w/ SW Ends Special End Connection Combinations
6 Seats R RPTFE
4 Body
5 Ball & Stem H Hastelloy C Ball and Stem
C WCB Carbon Steel (8000)
Oxygen Cleaned
7 Seals R RPTFE
8Service
ModificationC General Cleaned X
M Monel Ball and Stem
J
J
TFM 1600
TFM 1600
Designed to comply with recommendations from the Chlorine Institute Pamphlet 6, Piping Systems for Dry Chlorine
9Ball
ModificationH Vented Ball
10Special
Features
(Optional)
NOTES:
8000 Series Valves come standard with Lockable LeverConsult Factory for Other End Connection OptionsGeneral Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Tank Bottom TK7000 - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0200 - 11026 S S R R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 Tank Bottom Model TK7000 - 3 Piece Valves Brochure Link
0100 1" 0200 2" 0400 4"
0150 1-1/2" 0300 3"
- -
11005 11007
11006 11026
R K
J U
J
U
- -C
X
- -0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0009 Polished to 30-35 Ra 0210 Polished 8-12 Ra ???? Consult Factory
0032 Polished to 20-25 Ra
PART NUMBER - VALVE SELECTION
Example:140200-11026SSRR-NN = 2" TK7000 with Tank Bottom x ANSI 150 Flanged Ends, Stainless Steel Body, Ball and Stem, RPTFE Seats, RPTFE Seals.
2 Size*
3Base Code
(Model)
Model TK7000 w/ Tank Bottom x NPT End Model TK7000 w/ Tank Bottom x BW End (Sch 40)
Model TK7000 w/ Tank Bottom x SW End Model TK7000 w/ Tank Bottom x ANSI 150 Flanged
Website Link
4 Body S 316 Stainless Steel
5 Ball & Stem S 316 Stainless Steel Ball and Stem
6 SeatsTek-Fil
UHMWPE
RPTFE
TFM 1600
7 Seals R RPTFETFM 1600
UHMWPE
8Service
ModificationN None
General Cleaned
Oxygen Cleaned
Special Materials of Construction are available on request.
9Ball
ModificationN None
10Special
Features
(Optional)
H Vented Ball
NOTES:
TK7000 Model Valves come standard with Lockable LeverStainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Triad Series - 3Piece - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
18 0075 - 11010 S S J G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 18 Triad Series - 3 Piece Valves
0025 1/4" 0100 1" 0250 2-1/2" (SP Triad Only)
0038 3/8" 0125 1-1/4" 0300 3"
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
11010 11084
11011 11094
11081 11007
11047 11095
11022 11077
11008 11063
11009 SP Triad - Standard Port w/ SW Ends 110?? Other End Combinations Available - Consult Factory
S
C
J U
K Tek-Fil P PEEK*R T
G U
R RPTFE K Tek-Fil
J T
- -N None X
C General Cleaning M
N None
H Vented Ball
- -0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0009 Polished to 30-35 Ra 0210 Polished 8-12 Ra ???? Consult Factory
0032 Polished to 20-25 Ra
O&M Manual
8Service
Modification
Oxygen Cleaning
NACE MRO 175 2003 (Upgraded Bolting)
PTFE
6 Seats
TFM 1600 UHMWPE
RPTFE PTFE
7 Seals
TFM 1600
FP Triad - Full Port w/ BW (Sch80)
9Ball
Modification
Special Materials of Construction are available on request.
10Special
Features
(Optional)
NOTES:
Triad Model Valves come standard with a Lockable Lever.Special End Connection combinations not listed above are available, please consult factory for Part Number and Price
Stainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
Not all End Connections are available in all sizes - See price pages
**Not all Size are available in Full Port or Standard Port - See price Pages for size offerings
*17-4 SS Stem Required with PEEK Seats
Special End Connections like other Schedule BW end caps are available on request - Consult Factory
PART NUMBER - VALVE SELECTION
Example:180075-11010SSJG-NN = 3/4" FP Triad (Full Port), NPT Ends, Stainless Steel Body, Ball and Stem, TFM 1600 Seats, Graphite Seals.
2 Size**
3
Base Code
(Model
&
End
Connection)
FP Triad - Full Port w/ NPT Ends FP Triad - Full Port w/ NPT x SW Ends
FP Triad - Full Port w/ SW Ends FP Triad - Full Port w/ NPT x Ext BW (Sch80) Ends
FP Triad - Full Port w/ Ext SW Ends FP Triad - Full Port w/ SW x 600# Flanged Ends
SP Triad - Standard Port w/ NPT Ends
Website Link Brochure Link
FP Triad - Full Port w/ Ext BW (Sch80) Ends
FP Triad - Full Port w/ ANSI 600 RF Flanged Ends FP Triad - Full Port w/ BW (Sch40) (NonStandard)
Graphite UHMWPE
4 Body316 Stainless Steel
WCB Carbon Steel
SP Triad - Standard Port w/ NPT x SW Ends
D 316 Stainless Steel Ball with 17-4 SS Stem5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Triad HP Series -3Pcs- Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
18 0075 - 11010 S S J G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 18 Triad HP Series - 3 Piece Valves (High Pressure) O&M Link
0025 1/4" (Full Port Only) 0100 1" (Standard Port Only)
0038 3/8" (Full Port Only) 0125 1-1/4" (Standard Port Only)
0050 1/2" (Full Port Only) 0150 1-1/2" (Standard Port Only)
0075 3/4" (Standard Port Only) 0200 2" (Standard Port Only)
- -
110C1
110C2
110G3
110G7
110??
S
C
- -N None X
C General Cleaning
N None
H Vented Ball
- -0009 Polished to 30-35 Ra 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0032 Polished to 20-25 Ra 0210 Polished 8-12 Ra ???? Consult Factory
Brochure
Not all End Connections are available in all sizes - See price pagesGeneral Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
Special Materials of Construction are available on request.
P PEEK
G Graphite
Stainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
10Special
Features
(Optional)
NOTES:
Triad HP Model Valves come standard with a Lockable Lever.
Special End Connection combinations not listed above are available, please consult factory for Part Number and PriceSpecial End Connections like other Schedule BW end caps are available on request - Consult Factory
8Service
Modification
Oxygen Cleaning
9Ball
Modification
7 Seals
6 Seats
5 Ball & Stem D 316 Stainless Steel Ball with 17-4 SS Stem
4 Body316 Stainless Steel
WCB Carbon Steel
HP Triad - Standard Port w/ NPT x SW Ends
PART NUMBER - VALVE SELECTION
Example:180075-110C1SDPG-NN = 3/4" HP Triad (Standard Port), NPT Ends, Stainless Steel Body, Ball and 17-4PH Stainless Steel Stem, PEEK Seats, Graphite Seals.
2 Size*
3
Base Code
(Model &
End
Connection)
HP Triad - Standard Port w/ NPT Ends
HP Triad - Standard Port w/ SW Ends
HP Triad - Standard Port w/ NPT x Ext SW Ends
Other End Combinations Available - Consult Factory
Website Link
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Flanged Series Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
15 0400 - 11002 S S J G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 15 Flanged Series - Floating Ball Valves Website Link
0050 1/2" (Full Port Only) 0200 2" 0600 6"
0075 3/4" (Full Port Only) 0250 2-1/2" (Full Port Only) 0800 8"
0100 1" 0300 3" 1000 10"
0150 1-1/2" 0400 4" 1200 12"
- -
11000 11001
11002 F30 - Full Port - ANSI 300 RF Flanged Ends 11021 RF30 - Standard Port - ANSI 300 RF Flanged Ends
RF15 / RF30 Brochure
S A Alloy 20
C ? Special Materials (Consult Factory)
D
A
J U
K Tek-Fil P PEEK*
R T
G U
R RPTFE K Tek-Fil
J T
- -
N None X
C General Cleaning M
- -
0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
0009 Polished to 30-35 Ra 0210 Polished 8-12 Ra ???? Consult Factory
0032 Polished to 20-25 Ra
Special Materials of Construction are available on request.
Stainless Steel Spiral Wound Graphite Body Seal is standard on F15/F30 unless otherwise requested.Flat Face Flanged Ends or RTJ Flanged Ends are available on request.
Cavity Fillers only Available in F15 and F30 Models
H Vented BallN None
General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
10Special
Features
(Optional)
NOTES:
15 Series Valves come standard with a Lockable Lever. Recommended to add a Gear Operator for 6" Full Port and up. Not all sizes are available in Standard Port (RF15/RF30) Models - See price pages*17-4 Stem is Required when using PEEK seats
8Service
Modification
Oxygen Cleaning
NACE MRO 175 2003 (Upgraded Bolting - F15/F30)
9Ball
Modification
7 Seals
Graphite UHMWPE
TFM 1600 PTFE
6 Seats
TFM 1600 UHMWPE
RPTFE PTFE
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem 316 Stainless Steel Ball with 17-4 SS Stem
Alloy 20 Ball and Alloy 20 Stem
4 Body316 Stainless Steel
WCB Carbon Steel
PART NUMBER - VALVE SELECTION
Example:150400-11002SSJG-NN = 4" F30, Full Port, ANSI 300 RF Flanged Ends, Stainless Steel Body, Ball and Stem, TFM 1600 Seats, Graphite Seals.
2 Size
3Base Code
(Model)
F15 - Full Port - ANSI 150 RF Flanged Ends RF15 - Standard Port - ANSI 150 RF Flanged Ends
F15 / F30 BrochureF15 / F30 Website Link RF15 / RF30 Website Link
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Flanged Metal Seated - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
15 0400 - 11000 S 6 6 G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 15 Flanged Metal Seated - Floating Ball Valves Brochure O&M
0050 1/2" 0200 2"
0075 3/4" 0300 3"
0100 1" 0400 4"
0150 1-1/2" 0600 6"
- -
11000
11002 F30 - Full Port - ANSI 300 RF Flanged Ends
S
C
6
5
- -
- -
???? Consult Factory
N None M NACE MRO 175 2003 (Upgraded Bolting)
Stainless Steel Spiral Wound Graphite Body Seal is standard on F15/F30 unless otherwise requested.
Ball
ModificationN None
Flat Face Flanged Ends or RTJ Flanged Ends are available on request.Special Materials of Construction are available on request.
A351-CF8M w/ HVOF Chrome Carbide & 660 Stainless Steel Stem
A351-CF8M w/ HVOF Chrome Carbide & 17-4PH (ASTM A564 Type 630) Stem (Temperature Limitation of 650°F)
6
10Special
Features
(Optional)
NOTES:
15 Series Valves come standard with a Lockable Lever. Recommended to add a Gear Operator for 3", 4" and 6". FCI 70-2 Class IV is standard shutoff. Consult Factory for price adder on Class V or Class VI shutoffMetal Seated F15 and F30 model valves are Unidirectional Only
8Service
Modification
9
7 Seals G Graphite
6 Seats A351-CF8M w/ Chrome Carbide
4 Body316 Stainless Steel
WCB Carbon Steel
5 Ball & Stem
PART NUMBER - VALVE SELECTION
Example:150400-11000S66G-NN = 4" F15, Full Port, ANSI 150 RF Flanged Ends, Stainless Steel Body, Stainless Ball w/ HVOF Chrome Carbide coating,
660 Stainless Stem, Stainless Steel with HVOF Chrome Carbide coated Seats, Graphite Seals.
2 Size
3Base Code
(Model)
F15 - Full Port - ANSI 150 RF Flanged Ends
Technical Bulletin TB1010Website Link
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Chlorine Flanged - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
15 0300 - 11000 C H J R - C H
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 15 Chlorine Trim Flanged - Floating Ball Valves
0050 1/2" 0200 2"
0075 3/4" 0300 3"
0100 1" 0400 4"
0150 1-1/2" 0600 6"
- -
11000 11001
11002 F30 - Full Port - ANSI 300 RF Flanged Ends 11021 RF30 - Standard Port - ANSI 300 RF Flanged Ends
- -
- -
???? Consult Factory
All Chlorine Service valves have upstream vented ball and are cleaned and bagged to Flow-Tek WI-125
F15 / F30 Body seals will be RPTFE unless specified otherwise.
For Monel Ball and Stem consult factory for special pricing and delivery.
*For Fire Safe design, special ordered to have a Monel Spiral Wound Graphite body seal on the F15/F30 Model
PART NUMBER - VALVE SELECTION
Example:150300-11000CHJR-CH = 3" F15, Full Port, ANSI 150 RF Flanged Ends, Carbon Steel Body, Hastelloy Ball and Stem, TFM 1600 Seats, RPTFE Seals, Cleaned, Vented
2 Size*
3Base Code
(Model)
F15 - Full Port - ANSI 150 RF Flanged Ends RF15 - Standard Port - ANSI 150 RF Flanged Ends
Technical Bulletin - TB1007 Chlorine Service Ball Valves
H Hastelloy Ball and Stem Monel Ball and StemM
4 Body
5 Ball & Stem
WCB Carbon SteelC
9Ball
ModificationH
10Special
Features
(Optional)
NOTES:
15 Series Valves come standard with a Lockable Lever. Recommended to add a Gear Operator for 6" Full Port and up.
Other Seat Materials are available on request
Designed to comply with recommendations from the Chlorine Institute Pamphlet 6, Piping Systems for Dry Chlorine
Upstream Vented Ball
6 Seats J TFM 1600
7 Seals R RPTFE
8Service
Modification
G Graphite*
General CleanedC
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
TKF15 Tank-Flanged - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
15 0600 - 11019 S S J R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 15 Flanged Metal Seated - Floating Ball Valves Brochure
0250 2-1/2" 0800 8"
0300 3" 1000 10"
0400 4" 1200 12"
0600 6"
- -
J R
K P
- -
- -
???? Consult Factory10Special
Features
(Optional)
NOTES:
15 Series Valves come standard with a Lockable Lever.Recommended to add a Gear Operator for 6" Full Port and up.Other Seat Materials are available on requestSee Flanged end Section for Optional Special FeaturesConsult Factory for TKF30 (300# flanged end version)
RPTFE G
8Service
ModificationN None
9Ball
ModificationN None
Graphite7
316 Stainless Steel Ball and 17-4PH Stem
6 SeatsTFM 1600
Tek-Fil
RPTFE
PEEK
5 Ball & Stem S 316 Stainless Steel Ball and Stem D
Seals R
4 Body S 316 Stainless Steel
PART NUMBER - VALVE SELECTION
Example:150600-11019SSJR-NN = 6" TKF15, Full Port, ANSI 150 RF Flanged End x Tank Bottom Buttweld End, Stainless Steel Body, Ball and Stem, TFM 1600 Seats, RPTFE Seals.
2 Size*
3Base Code
(Model)11019 TKF15 - Full Port - ANSI 150 RF Flanged End x Tank
Website Link
6"-12"
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Multiport - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod- Flow Plan
17 0200 - 11A02 S S J J - N D - 0021
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 17 Multiport Series O&M 3HP Brochure
0025 1/4" 0100 1" 0250 2-1/2" 0800 8" (MPF150 Only)
0038 3/8" 0125 1-1/4" 0300 3" 1000 10" Standard Port (MPF150)
0050 1/2" 0150 1-1/2" 0400 4" Special Order
0075 3/4" 0200 2" 0600 6"
- -
11A17 MPT-230 - 3 Way - NPT Ends - Full Port 11A20
11A25 MPC-230 - 3 Way - Clamp Ends - Full Port 11A28
11A44 MPB-230 - 3 Way - Butt Weld (Sch 40) - Full Port 11A45
11A42 MPS-230 - 3 Way - SocketWeld - Full Port 11A43
11A02 MPF-150 - 3 Way - ANSI 150 RF Flanged - Full Port 11A32
11A03 11A12
11A01 11005
11A07 MPC-130 - 3 Way - Clamp Ends - Standard Port 11A?? MPx-2#0 - Special End Connection Combinations
S ? Special Materials
C
J U
K Tek-Fil T PTFE
J U
K Tek-Fil T PTFE
- -
A L-Port M
D T-Port O
- -0017 L Port - 3 Way - Flow Plan "A" 0027 LL Port - 4 Way - Flow Plan "M"
0018 L Port - 3 Way - Flow Plan "B" 0028 L Port - 4 Way - Flow Plan "N"
0019 T Port - 3 Way - Flow Plan "D" 0029 Straight Port - 4 Way - Flow Plan "O"
0020 T Port - 3 Way - Flow Plan "E" 0030 T Port - 4 Way - Flow Plan "P"
0021 T Port - 3 Way - Flow Plan "F" 0034 L Port - 3 Way - Flow Plan "A" - w/ Cavity Fillers
0022 T Port - 3 Way - Flow Plan "G" 0037 T Port - 3 Way - Flow Plan "D" - w/ Cavity Fillers
0023 T Port - 3 Way - Flow Plan "H" 0039 T Port - 3 Way - Flow Plan "F" - w/ Cavity Fillers
0024 T Port - 3 Way - Flow Plan "I" 0044 LL Port - 4 Way - Flow Plan "M" - w/ Cavity Fillers
0025 T Port - 3 Way - Flow Plan "J" 0144 L Port - 3 Way - Flow Plan "A" - w/ Antistatic Grounding
0026 T Port - 3 Way - Flow Plan "K" ???? Special Modification not listed (Consult Factory)
Not all Sizes or all End Connections are available in all Models - See price pages
6 Seats
3HP Website
MPF-300 - 3 Way - ANSI 300 RF Flanged - Full Port MPF-300 - 4 Way - ANSI 300 RF Flanged - Full Port
316 Stainless Steel
WCB Carbon Steel
Ball & Stem S
Flow Plan
&
Special
Features
(Optional)
TFM 1600
Inventory Lookup - for L-Port first search part number ending in NA-0017, for T-Port search part number ending in ND-0019
MPB-240 - 4 Way - Butt Weld (Sch 40) - Full Port
MPS-240 - 4 Way - SocketWeld - Full Port
MPF-150 - 4 Way - ANSI 150 RF Flanged - Full Port
4 Body
Special Materials of Construction are available on request. (minimum order quantities may apply)
MPT-130 and MPC-130 are only offered with TFM Seats & Seals.
N None
LL Port (4 Way Only)
Straight Port (4 Way Only)
10
UHMWPE
5
PART NUMBER - VALVE SELECTION
Example:170200-11A02SSJJ-ND-0021 = 2" MPF150, ANSI 150 RF Flanged Ends, Stainless Steel Body, Ball and Stem, TFM 1600 Seats and Seals, Flow Pattern F.
2 Size*
3
Base Code
(Model
&
End
Connection)
MPT-240 - 4 Way - NPT Ends - Full Port
MPC-240 - 4 Way - Clamp Ends - Full Port
MPT-130 - 3 Way - NPT Ends - Standard Port 3HP - 3 Way - NPT Ends - Standard Port (L Port)
Website Link Brochure
Special End Connections like other Schedule BW end caps are available on request - Consult Factory
NOTES:
316 Stainless Steel Ball with 316 Stainless Steel Stem
General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
C General Cleaned
7 SealsTFM 1600 UHMWPE
9Ball
Modification
8Service
Modification
Multiport Series Valves come standard with a Lockable Lever.
Special End Connection combinations not listed above are available, please consult factory for Part Number and Price
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
V Port - 7000-8000-3Pcs-Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0100 - 11001 S S K R - N B
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 Technical Bulletin TB1006 - V Control Selection
0025 1/4" 0100 1" 0250 2-1/2"
0038 3/8" 0125 1-1/4" 0300 3"
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2" 0600 6"
- -
11000 110M0
11001 110M1
11002 110M2
11023 110M3
11024 110M4
11013 110M7
11017 Model 7000/8000 w/ ANSI 150 Flanged Ends 110?? Special End Connections or Combinations
- -N None X
C
J 15° V-Port F 90° V-Port G
A 30° V-Port E 120° V-Port C Custom Cut (Requires -???? Special Feature)
B 60° V-Port P 45° V-Port D
- -0001 Cavity Fillers 0009 Polished to 30-35 Ra 0055 Special Trust Washer Material
0005 Slotted = 1/16" 0032 Polished to 20-25 Ra 0088 Upstream Vented w/ V-Port
0006 Slotted = 1/32" 0031 Polished 10-15 Ra ???? Custom Cut - ##° to Full or ##° at ##%
0117 Slotted = 1/8" 0210 Polished 8-12 Ra ???? Consult Factory
7 Seals R RPTFE
Not all End Connections are available in all sizes - See price pagesGeneral Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002ASpecial Materials of Construction or Special V Port Angles are available on request.
Ball
Modification
75° V-Port
Slotted Cut (Requires -???? Special Feature)
Stainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
Other Seat materials are available, consult factory for media and application compatibility.
S C316 Stainless Steel (7000 & DM7000) WCB Carbon Steel (8000 and DM8000)
10Special
Features
(Optional)
NOTES:
7000 & 8000 Model Valves come standard with a Lockable Lever. DM7000 & DM8000 come bare stem.Direct Mount Valves (DM7000/DM8000) are only Available in 1/2" - 2" Size Range. See Price PagesSpecial End Connections like other Schedule BW end caps are available on request - Consult Factory
8Service
Modification
Oxygen Cleaning
General Cleaning
9
K Tek-Fil
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem
6 Seats
4 Body
Model DM7000/DM8000 w/ SW Ends
Model 7000/8000 w/ BW Ends Model DM7000/DM8000 w/ BW Ends (Sch40)
Model 7000/8000 w/ Extended SW Ends Model DM7000/DM8000 w/ Ext SW Ends
Model 7000/8000 w/ Extended BW Ends (Sch40) Model DM7000/DM8000 w/ Ext BW Ends (Sch40)
PART NUMBER - VALVE SELECTION
Example: 140100-11001SSKR-NB = 1" 7000 with SW (Socketweld Ends), Stainless Steel Body, Stainless Steel Ball and Stem, Tek-Fil Seats, RPTFE Seals, 60° V-Port Ball.
2 Size*
3Base Code
(Model)
Model 7000/8000 w/ NPT Ends Model DM7000/DM8000 w/ NPT Ends
Model 7000/8000 w/ SW Ends
Model 7000/8000 w/ NPT x SW Ends Model DM7000/DM8000 w/ ANSI 150 Flanged Ends
V-Port - 3 Piece Valves V Control Brochure
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
V Port - MicroPure-3Pcs-Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
14 0050 - 11003 L L T T - C J
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 14 Micro Pure 3 Piece Valves
0500 1/2" 0150 1-1/2" 0300 3"
0075 3/4" 0200 2" 0400 4"
0100 1" 0250 2-1/2"
- -
11003 11062
11004
J
U
J
U
- -
J 15° V-Port F 90° V-Port G
A 30° V-Port E 120° V-Port C Custom Cut (Requires -???? Special Feature)
B 60° V-Port P 45° V-Port D
- -0001 Cavity Fillers 0055 Special Trust Washer Material
0005 Slotted = 1/16" 0088 Upstream Vented w/ V-Port
0006 Slotted = 1/32" 0031 Polished 10-15 Ra ???? Custom Cut - ##° to Full or ##° at ##%
0117 Slotted = 1/8" 0210 Polished 8-12 Ra ???? Consult Factory
Special Materials of Construction or Special V Port Angles are available on request.Due to softer seat material used in this valve series it is not recommended to control below 30% open with PTFE or TFM seats
75° V-Port
Slotted Cut (Requires -???? Special Feature)
10Special
Features
(Optional)
NOTES:
S7500/S7700 Series valves come standard with a Lockable LeverS7500/S7700 Series valves come standard with Internal Surface Finish of 15-20 Ra Maximum Per SFV-1General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
9Ball
Modification
Oxygen Cleaned
7 Seals T PTFETFM 1600
UHMWPE
8Service
ModificationC General Cleaned X
6 Seats T PTFETFM 1600
UHMWPE
4 Body L 316L (CF3M) Stainless Steel
5 Ball & Stem L 316L Stainless Steel Ball w/ 316 Stainless Steel Stem
PART NUMBER - VALVE SELECTION
Example: 140050-11003LLTT-CJ-0001 = 1/2" S75000 with Tri-Clamp Ends, SS Body, Ball and Stem, PTFE Seats, PTFE Seals, General Cleaned, 15° V-Port
2 Size*
3Base Code
(Model)
Model S7500 (Clamp Ends) Model S75/700 (Clamp End x Tube End)
Model S7700 (Tube Ends)
Technical Bulletin TB1006 - V Control SelectionWebsite Link
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
V Port - Triad -3Pcs - Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
18 100 - 11022 S S K G - N B
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 18 Triad Series - 3 Piece Valves
0025 1/4" 0100 1" 0250 2-1/2" (SP Triad Only)
0038 3/8" 0125 1-1/4" 0300 3"
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
11010 11084
11011 11094
11081 11007
11047 11095
11022 11077
11008 11063
11009 SP Triad - Standard Port w/ SW Ends 110?? Other End Combinations Available - Consult Factory
S
C
U
P PEEK*
G U
R RPTFE K Tek-Fil
J T
- -N None X
C General Cleaning M
J 15° V-Port F 90° V-Port G
A 30° V-Port E 120° V-Port C Custom Cut (Requires -???? Special Feature)
B 60° V-Port P 45° V-Port D
- -0001 Cavity Fillers 0009 Polished to 30-35 Ra 0055 Special Trust Washer Material
0005 Slotted = 1/16" 0032 Polished to 20-25 Ra 0088 Upstream Vented w/ V-Port
0006 Slotted = 1/32" 0031 Polished 10-15 Ra ???? Custom Cut - ##° to Full or ##° at ##%
0117 Slotted = 1/8" 0210 Polished 8-12 Ra ???? Consult Factory
PART NUMBER - VALVE SELECTION
Example:180100-11022SSKG-NB = 1" FP Triad (Full Port), 600# Flanged Ends, Stainless Steel Body, Ball and Stem, Tek-Fil Seats, Graphite Seals, 60° V-Port
2 Size**
3
Base Code
(Model
&
End
Connection)
FP Triad - Full Port w/ NPT Ends FP Triad - Full Port w/ NPT x SW Ends
FP Triad - Full Port w/ SW Ends FP Triad - Full Port w/ NPT x Ext BW (Sch80) Ends
Technical Bulletin TB1006 - V Control SelectionV Control Brochure
SP Triad - Standard Port w/ NPT x SW Ends
FP Triad - Full Port w/ SW x 600# Flanged Ends
FP Triad - Full Port w/ BW (Sch80)
FP Triad - Full Port w/ BW (Sch40) (NonStandard)
4 Body316 Stainless Steel
WCB Carbon Steel
FP Triad - Full Port w/ Ext SW Ends
FP Triad - Full Port w/ Ext BW (Sch80) Ends
FP Triad - Full Port w/ ANSI 600 RF Flanged Ends
SP Triad - Standard Port w/ NPT Ends
6 SeatsUHMWPE
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem D 316 Stainless Steel Ball with 17-4 SS Stem
K Tek-Fil
7 Seals
Graphite UHMWPE
TFM 1600 PTFE
8Service
Modification
Oxygen Cleaning
NACE MRO 175 2003 (Upgraded Bolting)
9Ball
Modification
75° V-Port
Slotted Cut (Requires -???? Special Feature)
**Not all Size are available in Full Port or Standard Port - See price Pages for size offerings
*17-4 SS Stem Required with PEEK Seats
General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
Special Materials of Construction or Special V Port Angles are available on request.
10Special
Features
(Optional)
NOTES:
Triad Model Valves come standard with a Lockable Lever.
Special End Connection or end combinations not listed above are available, please consult factory for Part Number and Price
Not all End Connections are available in all sizes - See price pages
Stainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
V Port -Flanged Series- Part No FTUS18020100
Series Size - Base Code BodyBall/
StemSeats Seals -
Service
Mod
Ball
Mod-
Special
Features
15 0600 - 11000 S S K R - N A
1 2 - 3 4 5 6 7 - 8 9 - 10
1 Series 15 Flanged Series - Floating Ball Valves
0050 1/2" (Full Port Only) 0200 2" 0600 6"
0075 3/4" (Full Port Only) 0250 2-1/2" (Full Port Only) 0800 8"
0100 1" 0300 3" 1000 10"
0150 1-1/2" 0400 4" 1200 12"
- -
11000 11001
11002 F30 - Full Port - ANSI 300 RF Flanged Ends 11021 RF30 - Standard Port - ANSI 300 RF Flanged Ends
F15 / F30 Website Link F15 / F30 Brochure RF15 / RF30 Website Link RF15 / RF30 Brochure
S
C ? Special Materials (Consult Factory)
U
P PEEK*
G U
R RPTFE K Tek-Fil
J T
- -
N None X
C General Cleaning M
J 15° V-Port F 90° V-Port G
A 30° V-Port E 120° V-Port C Custom Cut (Requires -???? Special Feature)
B 60° V-Port P 45° V-Port D
- -
0001 Cavity Fillers 0009 Polished to 30-35 Ra 0055 Special Trust Washer Material
0005 Slotted = 1/16" 0032 Polished to 20-25 Ra 0088 Upstream Vented w/ V-Port
0006 Slotted = 1/32" 0031 Polished 10-15 Ra ???? Custom Cut - ##° to Full or ##° at ##%
0117 Slotted = 1/8" 0210 Polished 8-12 Ra ???? Consult Factory
PART NUMBER - VALVE SELECTION
Example:150600-11000SSKR-NA = 6" F15, Full Port, ANSI 150 RF Flanged Ends, Stainless Steel Body, Ball and Stem, Tek-Fil Seats, RPTFE Seals, 30° V-Port
2 Size
3Base Code
(Model)
F15 - Full Port - ANSI 150 RF Flanged Ends RF15 - Standard Port - ANSI 150 RF Flanged Ends
V Control Brochure Technical Bulletin TB1006 - V Control Selection
4 Body316 Stainless Steel
WCB Carbon Steel
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem
TFM 1600 PTFE
6 SeatsUHMWPE
K Tek-Fil
D 316 Stainless Steel Ball with 17-4 SS Stem
10Special
Features
(Optional)
8Service
Modification
Oxygen Cleaning
NACE MRO 175 2003 (Upgraded Bolting - F15/F30)
9Ball
Modification
7 Seals
Graphite UHMWPE
75° V-Port
Slotted Cut (Requires -???? Special Feature)
NOTES:
15 Series Valves come standard with a Lockable Lever. Recommended to add a Gear Operator for 6" Full Port and up. Not all sizes are available in Standard Port (RF15/RF30) Models - See price pages*17-4 Stem is Required when using PEEK seats
Special V Port Angles are available on request.
Stainless Steel Spiral Wound Graphite Body Seal is standard on F15/F30 unless otherwise requested.Flat Face Flanged Ends or RTJ Flanged Ends are available on request.General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A
Cavity Fillers only Available in F15 and F30 Models
Special Materials of Construction are available on request.
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301
Segmented S19 - Part No FTUS18020100
Series Size - Base Code Body -Service
Mod
Ball
Mod-
Special
Features
19 1000 - 11003 T - N N
1 2 - 3 4 - 6 7 - 8
1 Series 19 S19 Segmented Control Valves
0100 1" 0300 3" 0800 8"
0150 1-1/2" 0400 4" 1000 10"
0200 2" 0600 6" 1200 12"
- -
11001 S19 - RF Flanged - Class 150 - Soft Seated 11003 S19 - RF Flanged - Class 150 - Metal Seated
11002 S19 - RF Flanged - Class 300 - Soft Seated 11004 S19 - RF Flanged - Class 300 - Metal Seated
11000 11005
11008 S19 - Wafer - Class 150 - Soft Seated (10" only) 11007 S19 - Wafer - Class 150 - Metal Seated (10" only)
11006 S19 - RF Flanged - Class 600 - Metal Seated
S T 317 Stainless Steel
C
010 17-4PH Viton PTFE + Carbon Fiber
012 17-4PH Viton PTFE + Carbon Fiber
048 17-4PH Viton PTFE + Carbon Fiber
022 17-4PH FFKM Graphite
024 17-4PH FFKM Graphite
030 17-4PH AFLAS PTFE + Carbon Fiber
053 17-4PH AFLAS PTFE + Carbon Fiber
- -
- -
???? Consult Factory
NOTES:
Face to Face Dimensions: Wafer = Flow-Tek Internal Standard
PART NUMBER - VALVE SELECTION
Example:191000-11003T048-NN = 10" S19, Segmented, ANSI 150 RF Flanged Ends, 317 Stainless Steel Body & Segment, 17-4PH Stem, Metal Seated, PTFE Packing.
2 Size
3
Base Code
End
Connection &
Seat Type
S19 - Wafer - Class 150/300 - Metal Seated (1"-8")S19 - Wafer - Class 150/300 - Soft Seated (1"-8")
Tek-Fil / 316
Brochure Technical Bulletin - TB1013
Consult Factory for correct Bray 10 Position Lever kit if required
Stellite 6 / 316
4 Body
Leakage Class: Soft Seat = Class VI per IEC 60534-4 / ANSI / FCI 70-2
8Special
Features
(Optional)
6Service
Modification
7Ball
ModificationN None
Special Configurations and Seat Designs available - Consult FactoryBase Codes must match the Trim for soft (Tek-Fil) or Metal (Stellite 6) seated.
19 Series Segmented Valves come standard bare stem.
Leakage Class: Metal Seat = Class IV per IEC 60534-4 /ANSI / FCI 70-2
Trim
048
5
N None
Website Link
PTFE
CF8M Tek-Fil / 316 PTFE
316 (CF8M) + Hard Chrome Plated Stellite 6 / 316 PTFE
Face to Face Dimensions: Flanged = ANSI/ISA 75.08.02 (ISA S75.04) / IEC 60534-3-2
316 Stainless Steel
WCB Carbon Steel
5 Trim CF8M
316 (CF8M) + Hard Chrome Plated
CF8M
316 (CF8M) + Hard Chrome Plated Stellite 6 / 316
Graphite
Special Materials of Construction are available on request.
SegmentStem &
PostPackingGasketO RingSeat
317 (CG8M) + Hard Chrome Plated Stellite 6 / 317
PTFE
PTFE
Graphite
Tek-Fil / 316
8323 N. Eldridge Pkwy. #100
Houston, TX 77041
www.bray.com/sales-terms-and-conditions
www.flow-tek.com
Phone 832-912-2300
Fax 832-912-2301