Embed Size (px)
Citation preview
Part Modeling IIUsing Autodesk Inventor Features Options Properties
2/22/2014 Inventor - Part Model II - jcs
EXAMPLE 1
Inventor Features
Extrude
Taper
Note: Continued from Sketch Constraints I
2/22/2014 Inventor - Part Model II - jcs
a. Open (previous file)
OpenWorkspace:
File: From Sketch Constraints I
2/22/2014 Inventor - Part Model II - jcs
b. Save (frequently)
Save:
2/22/2014 Inventor - Part Model II - jcs
c. Extrude - taper
ExtrudeDistance: 1 in.
More
Taper:
Shape
Direction
• Verify:
2/22/2014 Inventor - Part Model II - jcs
d. Specify Material
Pick:
<rmb>
2/22/2014 Inventor - Part Model II - jcs
e. Properties
Density
General Properities
Inertial properties:
2/22/2014 Inventor - Part Model II - jcs
EXAMPLE 2
Inventor Features
Revolve◦ Angle
◦ Direction
Note: Continued from Sketch Constraint II
2/22/2014 Inventor - Part Model II - jcs
a. Open (previous file)
OpenWorkspace:
File From Sketch Constraint II:
2/22/2014 Inventor - Part Model II - jcs
b. Save (frequently)
Save:
2/22/2014 Inventor - Part Model II - jcs
c. Revolve – angle / direction
RevolveProfile
Axis
Extents:
180
Direction
• Verify:
2/22/2014 Inventor - Part Model II - jcs
d. Material - Properties
Pick:
<rmb>
Properties◦ Density
◦ General
◦ Inertial
2/22/2014 Inventor - Part Model II - jcs
EXAMPLE 3:
Continue From Sketch Constraints III
Revolve◦ Axis
◦ Angle
◦ Direction
2/22/2014 Inventor - Part Model II - jcs
a. Open (previous file)
OpenWorkspace:
File: From Sketch Constraints III
2/22/2014 Inventor - Part Model II - jcs
b. Save (frequently)
Save:
2/22/2014 Inventor - Part Model II - jcs
c. Revolve - axis
RevolveProfile
Axis
Extents:
• Verify:
2/22/2014 Inventor - Part Model II - jcs
d. Material - Properties
Pick:
<rmb>
Properties◦ Density
◦ General
◦ Inertial
2/22/2014 Inventor - Part Model II - jcs
EXAMPLE 4
Revolve – Sketch Axis
Continued from Sketch Constraints IV
2/22/2014 Inventor - Part Model II - jcs
a. Open (previous file)
OpenWorkspace:
File: From Sketch Constraints IV
2/22/2014 Inventor - Part Model II - jcs
b. Save (frequently)
Save:
2/22/2014 Inventor - Part Model II - jcs
c. Sketch - axis
Edit SketchSketch -
Dimension
• Verify:
2/22/2014 Inventor - Part Model II - jcs
c. Revolve - axis
RevolveProfile
Axis
Extents:
• Verify:
2/22/2014 Inventor - Part Model II - jcs
d. Material - Properties
Pick:
<rmb>
Properties◦ Density
◦ General
◦ Inertial
2/22/2014 Inventor - Part Model II - jcs
d. Material - Properties
Pick:
<rmb>
Properties◦ Density
◦ General
◦ Inertial
2/22/2014 Inventor - Part Model II - jcs
d. Appearance – Visual Style
Pick: Chrome
Realistic
2/22/2014 Inventor - Part Model II - jcs
