MODEL

2400-2700SERIES

Hopper FeedersFeedall designs and manufactures a complete line of hopper feeders which offer automatic han-dling of sliding, rolling or headed parts. The automatic hopper feeders are used with all types ofgrinders, presses, machining equipment and special machines. The automatic feeding process isproven to be more cost effective by eliminating expensive hand labor of feeding and saving timelost by handling parts manually.

Send your parts feeding problem to us.We’ll need brief sketches or blueprints, along with sampleparts to be fed. Our engineers will provide the experienceand know-how needed to propose the most efficient andeconomical solution.

THE STANDARD OF THE INDUSTRYFeedall automatic hopper feeders, made by a company thathas been serving industry since 1946, are the most versatileand widely capable in their field. Feedall feeders are backedby a one year limited warranty and qualified field servicepersonnel. CHOOSE EXPERIENCE, CHOOSE QUALITY,CHOOSE FEEDALL FOR ALL YOUR PARTS FEEDINGAPPLICATIONS.

FORM 9141M-1 Printed in U.S.A.

Model 2400-DParts fed: automotivepiston pins, feeding andinduction coil.

38379 Pelton Road • Willoughby, Ohio 44094440-942-8100 • Fax 440-942-5710

1-800-942-8101 • www.feedall.com 38379 Pelton Road • Willoughby, Ohio 44094440-942-8100 • Fax 440-942-5710

1-800-942-8101 • www.feedall.com

Model 2400-DParts fed: diesel enginevalve lifters, feeding acenterless grinder.

Model 2500-HDParts fed & oriented: automotive bumpershock tubes.

Model 2500Parts fed & oriented: transmissionhub & ring gears.

Model 2400Parts fed: steeringpinion shaft feedingan autolathe.

Model 2500Disc orientorfeeding a form-ing press.

Model 2500Parts fed:hydraulichose stemextrusionsfeeding aCNC lathe.

Use of the nomograph Diameter = 1.0 inchis illustrated by the Length = 3.0 inchesexample shown: Space required for 100

parts = 520 cubic inchesParts per cubic foot = 350

Feedall nomograph for determining hoppersize for free flowing cylindrical parts

PART DIA.- IN. PARTSPER CU. FT.

CU. IN. PER 100 PARTS

PART LEN.- IN

These features, common to all Feedalls,give you maximum productivity:

• Proper part delivery - Parts are oriented andplaced in a chute, with right or left hand take-off, or two track delivery• “Custom” elevators - Cleat height andspacing on elevators are designed to size ofparts being fed. Only minimum maintenanceis required for moving parts. Chutes, wearstrips, cleats and tooling are hardened for extralong service.• Custom designed accessories - Automaticbank controls, air operating devices, diverters,timing controls and other special equipmentmay be added with new tooling designs• Tooling plate - This feature controls the rateat which parts fall into the hopper. For addedprotection, it may be easily equipped withpolyurethane-lined baffles.• Adjustable elevation - Height of the elevatortower may be varied to suit the application.Extra high discharge heights are available.• Speed Control - Feed rate is determined bythe speed of the elevating conveyor, whichhas a self-contained mechanical variable-speed drive or infinite speed D.C. drive optional.Handweel adjustment is easily accessible.

• Feeders for smaller partsThe Standard light-duty machine is a Model

2400-C, with hopper capacity of 6 cubic feet. Ithas a 6" wide elevating belt and occupies floorspace of 30" by 60". Typical parts handled areball studs, rods, inner and outer bearingraces, trunnions and bushings.

For Larger work or higher feeding rates, theModel 2400-D has a 7 1/2" wide elevating belt.

• Heavy-duty feedersFour larger models share a basic design.

Model 2500-C has a 14 cubic foot hopper,requires floor space of 48" by 64", and uses a12" wide elevating belt. It feeds trunnions,slugs, ring and bearing parts.Model 2500-D is identical to Model 2500-Cexcept for its hopper capacity of 20 cubic feet.Model 2600 with 20 cubic foot capacity, hasan 18" wide belt and feeds pieces up to 10"long - large bearing races, motor shafts, shellblanks. Floor space: 60" by 72".Model 2700 has a 24" wide belt for feedingextra large parts from 2 1/2" to 6 1/2" indiameter. Hopper capacity is 25 cubic feetand the machine needs floor space of 60" by84".

Each machine is factory tested, using cus-tomer parts, to insure proper operation wheninstalled.

Standard delivery is 12 to 14 weeks from dateof order. Standard parts available from stock.

By serving as link between consecutivemachine stations, Feedall hopper feeders cutoperating costs through greater productivityand fewer man-hours. Automatic hopperfeeding eliminates expensive hand labor offeeding and orienting and also saves the timeotherwise lost by handling parts manually.

Feedall’s automatic hopper feeders are usedwith all types of grinders, presses, machiningequipment and special machines.The standard of the industry

Feedall automatic hopper feeders, madeby a company that has been serving industryfor more than 40 years, are the most versatileand widely capable in their field.Features every operation needs

There are standard Feedall machines withhopper capacities ranging from 6 cubic feet to40 cubic feet. The hoppers are floor-loaded byconveyor or bulk handling. The hoppersprovide temporary bulk storage, saving valu-able floor space and eliminating extra handling.Standard machines by be adapted easilyand economically to meet your specific needs.

Model 2500Parts fed: motor shaft blanks to aforging press.

Model 2500-CParts fed & oriented: clutch discs.

Model 2500-Dc/w 1600 conveyorParts fed: conduit couplings to ass’y.

Model 2400-DParts fed & oriented: automotive steering pump shaftto a centerless grinder.

Model 2500Bearing Feeder. Parts fed:inner & outer races.

Model 2400-Cc/w Auxiliary ElevatorThis machine is used when partsmust be oriented and minimal partdamages is required. Orienting iscompleted closer to hopper, thusreturn parts have a minimum dis-tance to fall back to storage

Model 2500-HDc/w two position robot pickup station. Parts fed and oriented:automotive front wheel drive spindle forgings, feeding a dualspindle CNC lathe via loader robot.