Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
1
REV: 13-10-01
Part Ⅰ
Package Outline Drawing
I-1
Table of Contents
Part Ⅰ - Package Outline Drawing
DIP-8 PACKAGE OUTLINE DRAWING ----------------------------------------------------------- Ⅰ-1 DIP-14 PACKAGE OUTLINE DRAWIN ------------------------------------------------------------ Ⅰ-2 DIP-16 PACKAGE OUTLINE DRAWING ---------------------------------------------------------- Ⅰ-3 DIP-18 PACKAGE OUTLINE DRAWING --------------------------------------------------------- Ⅰ-4 DIP-20 PACKAGE OUTLINE DRAWING --------------------------------------------------------- Ⅰ-5 SOP-8 Exposed Pad(Heat Sink)PACKAGE OUTLINE DRAWING ------------------------- Ⅰ-6 SOP-8 PACKAGE OUTLINE DRAWING --------------------------------------------------------- Ⅰ-7
SOP-14 PACKAGE OUTLINE DRAWING -------------------------------------------------------- Ⅰ-8
SOP-16 (150 mil) PACKAGE OUTLINE DRAWING -------------------------------------------- Ⅰ-9 SOP-16 (150 mil) Exposed Pad (Heat Sink) PACKAGE OUTLINE DRAWING ---------- Ⅰ-10
SOP-16 (300 mil) PACKAGE OUTLINE DRAWING -------------------------------------------- Ⅰ-11
SOP-20 PACKAGE OUTLINE DRAWING -------------------------------------------------------- Ⅰ-12
SOP-24 PACKAGE OUTLINE DRAWING -------------------------------------------------------- Ⅰ-13
SOT-23 PACKAGE OUTLINE DRAWING -------------------------------------------------------- Ⅰ-14
SOT-23-5 PACKAGE OUTLINE DRAWING ------------------------------------------------------ Ⅰ-15
SOT-23-6 PACKAGE OUTLINE DRAWING ------------------------------------------------------ Ⅰ-16
SOT-89 PACKAGE OUTLINE DRAWING -------------------------------------------------------- Ⅰ-17
SOT-89 5PIN PACKAGE OUTLINE DRAWING ------------------------------------------------- Ⅰ-18
SOT-143 PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-19
SOT-223 PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-20
MSOP-8 PACKAGE OUTLINE DRAWING -------------------------------------------------------- Ⅰ-21 MSOP-8 Exposed Pad(Heat Sink)PACKAGE OUTLINE DRAWING ----------------------- Ⅰ-22 MSOP-10 PACKAGE OUTLINE DRAWING ------------------------------------------------------ Ⅰ-23 MSOP-10 Exposed Pad(Heat Sink)PACKAGE OUTLINE DRAWING --------------------- Ⅰ-24 TO-92 PACKAGE OUTLINE DRAWING ----------------------------------------------------------- Ⅰ-25
TO-220 PACKAGE OUTLINE DRAWING --------------------------------------------------------- Ⅰ-26
I-2
TO-220B PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-27 TO-220-5L PACKAGE OUTLINE DRAWING ----------------------------------------------------- Ⅰ-28
TO-252-3L PACKAGE OUTLINE DRAWING ---------------------------------------------------- Ⅰ-29 TO-252-4L PACKAGE OUTLINE DRAWING --------------------------------------------------- Ⅰ-30
TO-252-5L PACKAGE OUTLINE DRAWING --------------------------------------------------- Ⅰ-31 TO-263-3L PACKAGE OUTLINE DRAWING ---------------------------------------------------- Ⅰ-32 TO-263-5L PACKAGE OUTLINE DRAWING ---------------------------------------------------- Ⅰ-33 QFN 12L-3x3x0.6-0.65mm PACKAGE OUTLINE DRAWING ------------------------------- Ⅰ-34 QFN 12L-3x3x0.75-0.5mm PACKAGE OUTLINE DRAWING ------------------------------- Ⅰ-35 QFN 12L-3x3x0.9-0.5mm PACKAGE OUTLINE DRAWING --------------------------------- Ⅰ-36 QFN 12L-4x4x0.75-0.8mm PACKAGE OUTLINE DRAWING -------------------------------- Ⅰ-37 QFN 12L-4x4x0.9-0.8mm PACKAGE OUTLINE DRAWING --------------------------------- Ⅰ-38 QFN 16L-3x3x0.6-0.5mm PACKAGE OUTLINE DRAWING --------------------------------- Ⅰ-39 QFN 16L-3x3x0.75 -0.5mm PACKAGE OUTLINE DRAWING ------------------------------- Ⅰ-40 QFN 16L-3x3x0.9-0.5mm PACKAGE OUTLINE DRAWING --------------------------------- Ⅰ-41 QFN 16L-4x4x0.75-0.65mm PACKAGE OUTLINE DRAWING ----------------------------- Ⅰ-42 QFN 16L-4x4x0.9-0.65mm PACKAGE OUTLINE DRAWING ------------------------------- Ⅰ-43 QFN 20L-4x4x0.75-0.5 mm PACKAGE OUTLINE DRAWING ------------------------------ Ⅰ-44 QFN 20L-4x4x0.9-0.5 mm PACKAGE OUTLINE DRAWING -------------------------------- Ⅰ-45 DFN 6L-2x2x0.75-0.65mm PACKAGE OUTLINE DRAWING -------------------------------- Ⅰ-46 DFN 8L-3x3x0.75-0.65mm PACKAGE OUTLINE DRAWING -------------------------------- Ⅰ-47 DFN 10L-3x3x0.75-0.5mm PACKAGE OUTLINE DRAWING -------------------------------- Ⅰ-48 DFN 12L-3x3x0.75-0.45mm PACKAGE OUTLINE DRAWING ------------------------------- Ⅰ-49 DFN 12L-3x3x0.75-0.5mm PACKAGE OUTLINE DRAWING -------------------------------- Ⅰ-50 DFN 12L-3x3x0.75-0.5mm (Without Heat Sink) PACKAGE OUTLINE DRAWING ----- Ⅰ-51 SC70-3L PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-52 SC70-5L PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-53 SC70-6L PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-54 TSOT-23 PACKAGE OUTLINE DRAWING ------------------------------------------------------- Ⅰ-55 TSOT-23-5 PACKAGE OUTLINE DRAWING ---------------------------------------------------- Ⅰ-56 TSOT-23-6 PACKAGE OUTLINE DRAWING ---------------------------------------------------- Ⅰ-57 TSSOP-8 PACKAGE OUTLINE DRAWING ------------------------------------------------------ Ⅰ-58
I-3
TSSOP-16 PACKAGE OUTLINE DRAWING ---------------------------------------------------- Ⅰ-59 TSSOP-16 Exposed Pad(Heat Sink) PACKAGE OUTLINE DRAWING ------------------ Ⅰ-60
I-4
Part I Package Outline Drawing (unit:mm)
DIP-8 PACKAGE OUTLINE DRAWING
GAUGE PLANE
0.38
A
A1A2
L
D1A
b2
A
e
eB
eA
E1
D E
cWITH PLATING
SECTION A-ABASE METAL
b
2.54 BSCe
L
eB
eA
2.92
7.62 BSC
3.81
10.92
D 9.01
E
E1
D1
7.62
6.10
0.13
c
b2
b
0.20
1.14
0.36
10.16
8.26
7.11
0.35
1.78
0.56
MILLIMETERS
MIN.
SYMBOL
A1
A2
A
0.38
2.92
MAX.
4.95
5.33
DIP-8
Note: 1. Refer to JEDEC MS-001BA 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side . 3. Dimension "D1"and "E1" do not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-5
DIP-14 PACKAGE OUTLINE DRAWING
E
eB
eA
A2A1
A
b2D1
L
AA
e
D
E1
0.38
c
WITH PLATING
SECTION A-A
BASE METAL
b
GAUGE PLANE
2.54 BSCe
L
eB
eA
2.92
7.62 BSC
3.81
10.92
D 18.67
E
E1
D1
7.62
6.10
0.13
c
b2
b
0.20
1.14
0.36
19.69
8.26
7.11
0.35
1.78
0.56
MILLIMETERS
MIN.
SYMBOL
A1
A2
A
0.38
2.92
MAX.
4.95
5.33
DIP-14
Note: 1. Refer to JEDEC MS-001AA 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side . 3. Dimension "D1"and "E1" do not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-6
DIP-16 PACKAGE OUTLINE DRAWING
E
eB
eA
A2A1
A
D1
L
eb2
A A
D
E1
0.38
c
WITH PLATING
SECTION A-ABASE METAL
b
GAUGE PLANE
2.54 BSCe
L
eB
eA
2.92
7.62 BSC
3.81
10.92
D 18.66
E
E1
D1
7.62
6.10
0.13
c
b2
b
0.20
1.14
0.36
19.69
8.26
7.11
0.35
1.78
0.56
MILLIMETERS
MIN.
SYMBOL
A1
A2
A
0.38
2.92
MAX.
4.95
5.33
DIP-16
Note: 1. Refer to JEDEC MS-001BB 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side . 3. Dimension "D1"and "E1" do not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-7
DIP-18 PACKAGE OUTLINE DRAWING
2.54 BSCe
L
eB
eA
2.92
7.62 BSC
3.81
10.92
D 22.35
E
E1
D1
7.62
6.10
0.13
c
b2
b
0.20
1.14
0.36
23.37
8.26
7.11
0.35
1.78
0.56
MIN.
SYMBOL
A1
A2
A
0.38
2.92
MAX.
4.95
5.33
MILLIMETERS
DIP-18
eB
A2A1
A
D1
L
b2
AA
e
D
E1
0.38
c
WITH PLATING
eA SECTION A-A
BASE METAL
b
E
GAUGE PLANE
Note: 1. Refer to JEDEC MS-001AC. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side . 3. Dimension "D1"and "E1" do not include inter-lead flash or protru 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
sions.
I-8
DIP-20 PACKAGE OUTLINE DRAWING
eB
A2A1
A
D1 eb2
A
L
A
D
E1
0.38
cWITH PLATING
eASECTION A-A
BASE METAL
b
E
GAUGE PLANE
2.54 BSCe
L
eB
eA
2.92
7.62 BSC
3.81
10.92
D 24.89
E
E1
D1
7.62
6.10
0.13
c
b2
b
0.20
1.14
0.36
26.92
8.26
7.11
0.35
1.78
0.56
MILLIMETERS
MIN.
SYMBOL
A1
A2
A
0.38
2.92
MAX.
4.95
5.33
DIP-20
Note: 1. Refer to JEDEC MS-001AD. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side . 3. Dimension "D1"and "E1" do not include inter-lead flash or protrusi 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
ons.
I-9
SOP-8 Exposed Pad(Heat Sink)PACKAGE OUTLINE DRAWING
Note : 1. Refer to JEDEC MS-012E. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
A
D
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATINGA1
B
C
eA A
HE
D1
E1
EXPOSED THERMAL PAD(Heat Sink)(BOTTOM CENTER OF PACKAGE)
h X
45°
SEE VIEW B
h
θ
L
D
e
H
E
C
B
A1
0° 8°
1.27 BSC
4.80
3.80
0.31
0.17
0.00
5.00
4.00
0.51
0.25
0.15
SYMBOL
A
SOP-8 Exposed Pad(Heat Sink)
MILLIMETERS
1.35
MIN.
1.75
MAX.
D1
E1
3.501.50
1.0 2.55
5.80 6.20
0.25 0.50
0.40 1.27
I-10
SOP-8 PACKAGE OUTLINE DRAWING
A
θ
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATINGA1
B
C
D
eA A
HE
h X
45°
SEE VIEW B
h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
4.80
5.80
3.80
0.33
0.19
0.10
5.00
6.20
4.00
0.51
0.25
0.25
SYMBOL
A
SOP-8
MILLIMETERS
1.35
MIN.
1.75
MAX.
Note: 1. Refer to JEDEC MS-012AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-11
SOP-14 PACKAGE OUTLINE DRAWING
Note: 1. Refer to JEDEC MS-012AB. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side on. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
8.55
5.80
3.80
0.33
0.19
0.10
8.75
6.20
4.00
0.51
0.25
0.25
SYMBOL
A
SOP-14
MILLIMETERS
1.35
MIN.
1.75
MAX.
SEE VIEW B
A
LVIEW B
0.25
θ
SEATING PLANEGAUGE PLANE
WITH PLATING
BASE METAL
A1
B
SECTION A-AC
D
eA A
E H
h X
45°
I-12
SOP-16 (150 mil) PACKAGE OUTLINE DRAWING
SEE VIEW B
A
LVIEW B
0.25
θ
SEATING PLANEGAUGE PLANE
A1
WITH PLATING
BASE METAL
B
SECTION A-A
C
D
eA A
E H
h X
45°
h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
9.80
5.80
3.80
0.33
0.19
0.10
10.00
6.20
4.00
0.51
0.25
0.25
SYMBOL
A
SOP-16(150mil)
MILLIMETERS
1.35
MIN.
1.75
MAX.
Note: 1. Refer to JEDEC MS-012AC. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side on. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-13
SOP-16 (150 mil) Exposed Pad (Heat Sink)PACKAGE OUTLINE DRAWING
SEE VIEW B
D
eA A
E H
h X
45°
D1
E1
A
LVIEW B
0.25
θ
SEATING PLANEGAUGE PLANE
A1
WITH PLATING
BASE METAL
B
SECTION A-A
C
h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
9.80
5.80
3.80
0.31
0.10
0.00
10.00
6.20
4.00
0.51
0.25
0.15
SYMBOL
A
SOP-16(150mil) Exposed Pad (Heat Sink)
MILLIMETERS
1.35
MIN.
1.70
MAX.
D1
E1
3.30 5.001.30 2.80
Note: 1. Refer to JEDEC MS-012AC. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side on. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-14
SOP-16 (300 mil) PACKAGE OUTLINE DRAWING
A
θ
LVIEW B
0.25
SEATING PLANE
BASE METAL
WITH PLATING
GAUGE PLANE
A1 B
C
SECTION A-A
D
Ae A
HE
h x
45°
SEE VIEW B
h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
10.10
10.00
7.40
0.33
0.23
0.10
10.50
10.65
7.60
0.51
0.32
0.30
SYMBOL
A
SOP-16(300mil)
MILLIMETERS
2.35
MIN.
2.65
MAX.
Note: 1. Refer to JEDEC MS-013AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-15
SOP-20 PACKAGE OUTLINE DRAWING
A
θ
LVIEW B
0.25
SEATING PLANE
BASE METAL
WITH PLATING
GAUGE PLANE
A1 B
C
SECTION A-A
D
Ae A
HE
h x
45°
SEE VIEW B
h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
12.60
10.00
7.40
0.33
0.23
0.10
13.00
10.65
7.60
0.51
0.32
0.30
SYMBOL
A
SOP-20
MILLIMETERS
2.35
MIN.
2.65
MAX.
Note: 1. Refer to JEDEC MS-013AC. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-16
SOP-24 PACKAGE OUTLINE DRAWING
SEE VIEW B
A
θ
LVIEW B
0.25
SEATING PLANE
BASE METAL
WITH PLATING
GAUGE PLANE
B
C
SECTION A-A
A1
D
Ae A
HE
h x
45°
h
θ
L
D
e
H
E
C
B
A1
0.500.25
0.40
0°
1.27
8°
1.27 BSC
15.20
10.00
7.40
0.33
0.23
0.10
15.60
10.65
7.60
0.51
0.32
0.30
SYMBOL
A
SOP-24
MILLIMETERS
2.35
MIN.
2.65
MAX.
Note: 1. Refer to JEDEC MS-013AD. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-17
SOT-23 PACKAGE OUTLINE DRAWING
cAA2
b
WITH PLATING
VIEW B
θ
L1
LSEATING PLANEGAUGE PLANE
0.25
A1
SECTION A-ABASE METAL
e1
eD
E
A A
E1
SEE VIEW B
0°
0.90
0.30
1.50
2.60
2.80
0.08
0.30
0.00
e
θ
L1
L
e1
c
E
E1
D
b
A2
A1
0.95 BSC
8°
0.60
1.90 BSC
0.60 REF
1.30
1.70
3.00
3.00
0.22
0.50
0.15
0.95
MIN.
SYMBOL
A 1
MAX.
SOT-23
MILLIMETERS
.45
Note: 1. Refer to JEDEC MO-178. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-18
SOT-23-5 PACKAGE OUTLINE DRAWING
cAA2
b
WITH PLATING
VIEW B
θ
L1
LSEATING PLANEGAUGE PLANE
0.25
A1
SECTION A-ABASE METAL
e1
D
E
A A
E1
SEE VIEW B
e
0°
0.90
0.30
1.50
2.60
2.80
0.08
0.30
0.00
e
θ
L1
L
e1
c
E
E1
D
b
A2
A1
0.95 BSC
8°
0.60
1.90 BSC
0.60 REF
1.30
1.70
3.00
3.00
0.22
0.50
0.15
0.95
MIN.
SYMBOL
A 1.45
MAX.
SOT-23-5
MILLIMETERS
Note : 1. Refer to JEDEC MO-178AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-19
SOT-23-6 PACKAGE OUTLINE DRAWING
cAA2
b
WITH PLATING
VIEW B
θ
L1
LSEATING PLANEGAUGE PLANE
0.25
A1
SECTION A-ABASE METAL
e1
D
E
A A
E1
SEE VIEW B
e
0°
0.90
0.30
1.50
2.60
2.80
0.08
0.30
0.00
e
θ
L1
L
e1
c
E
E1
D
b
A2
A1
0.95 BSC
8°
0.60
1.90 BSC
0.60 REF
1.30
1.70
3.00
3.00
0.22
0.50
0.15
0.95
MIN.
SYMBOL
A 1
MAX.
SOT-23-6
MILLIMETERS
.45
Note : 1. Refer to JEDEC MO-178AB. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-20
SOT-89 PACKAGE OUTLINE DRAWING
A
C
e1
e
BB1
D
D1
H
EL
0.36
0.89
3.94
2.29
1.50
4.40
0.35
0.44
e1
L
H
D
E
e
D1
C
B1
B
3.00 BSC
1.20
4.25
0.48
2.60
1.83
4.60
0.44
0.56
1.50 BSC
1.40
MIN.
SYMBOL
A 1
MAX.
SOT-89
MILLIMETERS
.60
Note: 1. Refer to JEDEC TO-243AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-21
SOT-89 5PIN PACKAGE OUTLINE DRAWIN
1.50 BSC
3.00 BSC
L 0.80
e
H
e1
E
D1
3.94
2.29
1.50
1.20
1.83
4.25
2.60
SOT-89-5
MILLIMETERS
SYMBOL
C
D
B
A
0.36
4.40
0.35
1.40
MIN.
1.60
MAX.
0.44
4.60
0.56
A
E
B
e1
e
L
D
D1 C
H
Note: 1. Refer to JEDEC TO-243AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-22
SOT-143 PACKAGE OUTLINE DRAWING
0.54 REFL1
0.60
0.80
1.401.20
1.92 BSC
SOT-143
θ 8°0°
0.20 BSC
1.070.75A2
MILLIMETERS
L
e1
e
E1
E
D
c
b2
b
A1
A
0.40
2.642.10
3.042.80
0.200.08
0.890.76
0.500.30
0.150.05
1.22
MAX.MIN.
SYMBOL
e1
D
e
EE1
cb/b2
A
A1
A ASEE VIEW B
SECTION A-A
WITH PLATING
BASE METAL
VIEW B
SEATING PLANEGAUGE PLANE
A2
L
L1
0.25
θ
Note: 1. Refer to JEDEC TO-253AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-23
SOT-223 PACKAGE OUTLINE DRAWING
3.30
0°
1.55
0.90
6.70
6.30
0.23
2.90
0.66
0.02
E1
θ
L
e1
e
b2
D
E
c
b
A2
A1
3.70
8°
2.30 BSC
4.60 BSC
1.65
7.30
6.70
0.33
3.10
0.84
0.10
MIN.
SYMBOL
A 1.80
MAX.
SOT-223
MILLIMETERS
c
b
AA2
WITH PLATING
VIEW B
θ
0.25
LSEATING PLANEGAUGE PLANE
A1
BASE METALSECTION A-A
D
E
e1
eA A
b2E1
SEE VIEW B
Note: 1. Refer to JEDEC TO-261AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E1" does not include inter-lead flash or protrusions 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
.
I-24
MSOP-8 PACKAGE OUTLINE DRAWING
A
A1A2
θ
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATING
b
c
ED
Ae
A
E1
SEE VIEW B
e
θ
L
c
E
E1
D
A2
b
A1
0.65 BSC
0.40
0°
0.70
8°
4.90 BSC
0.13
2.90
2.90
0.75
0.25
0.00
0.23
3.10
3.10
0.95
0.40
0.15
SYMBOL
A
MSOP-8
MILLIMETERS
MIN.
1.10
MAX.
Note: 1. Refer to JEDEC MO-187AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-25
MSOP-8 Exposed Pad (Heat Sink) PACKAGE OUTLINE DRAWING
A
A1A2
E
D
Ae
AE1
SEE VIEW B
D1
E2
EXPOSED THERMAL PAD (Heat Sink)(BOTTOM CENTER OF PACKAGE)
θ
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATING
b
c
e
θ
L
c
E
E1
D
A2
b
A1
0.65 BSC
0.40
0°
0.80
8°
4.90 BSC
0.08
0.75
0.22
0.00
0.23
0.95
0.38
0.15
SYMBOL
A
MSOP-8 Exposed Pad(Heat Sink)
MILLIMETERS
MIN.
1.10
MAX.
3.00 BSC
3.00 BSC
D1
E2
0.75
0.752.50
2.50
Note: 1. Refer to JEDEC MO-187AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-26
MSOP-10 PACKAGE OUTLINE DRAWING
A2 A
θ
L
VIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATING
A1
b
c
D
e A
E1 E
SEE VIEW BA
e
θ
L
c
E
E1
D
A2
b
A1
0.50 BSC
0.40
0°
0.70
8°
4.90 BSC
0.13
2.90
2.90
0.75
0.15
0.00
0.23
3.10
3.10
0.95
0.30
0.15
SYMBOL
A
MSOP-10
MILLIMETERS
MIN.
1.10
MAX.
Note: 1. Refer to JEDEC MO-187BA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-27
MSOP-10 Exposed Pad (Heat Sink) PACKAGE OUTLINE DRAWING
A2 A
A1
D
e B
E1 ESEE VIEW A
B
D1
E2
EXPOSED THERMAL PAD (Heat Sink)(BOTTOM CENTER OF PACKAGE)
θ
L
VIEW A
0.25
SEATING PLANE
SECTION B-BBASE METAL
GAUGE PLANE
WITH PLATING
b
c
e
c
E
E1
D
A2
b
A1
0.50 BSC
4.90 BSC
0.08
0.75
0.17
0
0.23
0.95
0.33
0.15
SYMBOL
A
MSOP-10 Exposed Pad (Heat Sink)
MILLIMETERS
MIN.
1.10
MAX.
θ
L 0.40
0°
0.80
8°
E2 0.75 2.50
D1 0.75 2.50
3.00 BSC
3.00 BSC
Note: 1. Refer to JEDEC MO-187E 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-28
TO-92 PACKAGE OUTLINE DRAWING
b SA
ED
j
e1
e
L
MILLIMETERS
TO-92
MAX.
5.33A
SYMBOL MIN.
4.32
0.47
4.19
2.66
1.39
5.20
2.66
b
D
E
e1
L
j
e
S
0.36
3.18
2.42
1.15
3.43
12.70
4.45
2.03
Note: 1. Refer to JEDEC TO-226. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "A" does not include inter-lead flash or protrusions 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
.
I-29
TO-220 PACKAGE OUTLINE DRAWING
SECTION A-A
b
A2
L
L1
b2 e
A A
E
P
Q
DH
1
A
WITH PLATING
BASE METAL
A1
c
E1
D2
THERMAL PAD
2.54
5.85
1.15
3.54
12.70
2.04
0.51
2.54 BSC
6.86
14.23
0.35
0.38
H1
Q
P
L1
L
A2
D
e
A1
E1
c
b2
b
6.85
3.42
6.35
4.08
14.73
2.92
1.77
1.39
8.90
16.51
0.61
1.01
3.56
MIN.
SYMBOL
A 4.82
MAX.
TO-220
MILLIMETERS
D1 8.38 9.02
--
9.66E 10.66
D2 11.75 12.88
D1
Note: 1. Refer to JEDEC TO-220AB. 2. Dimension "E" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "D1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-30
TO-220B PACKAGE OUTLINE DRAWING
E2
D2
THERMAL PAD
E
L L1
b
e1
e
dD
E1E1D
1F
A
CA1
A2
φ
11.75D2 12.88
6.86E2 8.90
3.556(REF)
2.743(REF)
1.524 2.032
9.880
3.708
0.304
1.143
8.250
4.250
9.906
8.480
0.690
L
F
e1
e
A2
D1
E1
A1
E
D
C
b
3.962
10.64
7.112
1.397
8.550
0.530
4.550
10.44
9.300
0.940
4.318
MIN.
SYMBOL
A 4
MAX.
TO-220B
MILLIMETERS
.826
d
6.604
L1 9.090 9.850
φ
4.953 5.220
Note : Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-31
TO-220-5L PACKAGE OUTLINE DRAWING
D1
THERMAL PAD
φ
E
dD
E1E1A
L
F
A1e b C
E2
D2
11.75D2 12.88
6.86E2 8.90
13.589
3.708
0.304
1.143
2.032
9.779
7.620
0.635
L
F
e
D1
E1
A1
E
D
C
b
3.962
14.351
1.397
0.460
2.921
10.668
9.398
1.016
4.064
MIN.
SYMBOL
A 4.826
MAX.
TO-220-5L
MILLIMETERS
d
φ
4.953 5.220
1.524 2.032
3.429 3.683
2.620 2.870Note : Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-32
TO-252-3L PACKAGE OUTLINE DRAWING
c2
SEE VIEW B
A
H
b3
AAe
E
DL3
L4
c
BASE METAL
WITH PLATING
SEATING PLANE
b
SECTION A-A
VIEW B
A1
LL1
UGE PLANEGA
L2
THERMAL PAD
D1
E1
MILLIMETERS
TO-252-3L
MAX.
2.38A
SYMBOL MIN.
2.19
0.13
5.46
0.61
0.89
6.22
6.73
0.89
2.67 REF
0.51 BSC
10.41
1.78
2.03
1.02
2.28 BSC
A1
b
b3
c2
E
D
c
H
L
L1
L2
L4
L3
e
0.00
4.95
0.46
0.46
5.33
6.35
9.40
1.40
0.89
--
0.64
0° 8°
6.004.60
5.463.90
D1
E1
No
te: 1. Refer to JEDEC TO-252AA and AB. 2. Dimension "E" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side .
3. Dimension "D" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch
dimensions are not necessarily exact.
I-33
TO-252-4L PACKAGE OUTLINE DRAWING
L2
WITH PLATING
BASE METAL
c
L3D
E
e A A
b3
H
A
SEE VIEW B
c2
UGE PLANEGA
L1L
A1
VIEW B
SECTION A-A
b
SEATING PLANE
THERMAL PAD
D1
E1
L4
0°
0.51
0.89
1.40
9.40
6.35
5.33
0.46
0.46
4.32
0.00
e
L3
θ
L2
L1
L
H
c
D
E
c2
b3
b
A1
1.27 BSC
8°
2.03
1.78
10.41
0.51 BSC
2.67 REF
0.71
6.73
6.22
0.89
0.61
5.46
0.13
2.19
MIN.
SYMBOL
A 2
MAX.
TO-252-4L
MILLIMETERS
.38
4.90D1 6.00
4.32E1 5.33
0.6L4 1.0
Note: 1. Refer to JEDEC TO-252AD and AB. 2. Dimension "E" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "D" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-34
TO-252-5L PACKAGE OUTLINE DRAWING
L2
GE PLANEGAU
L1L
A1
VIEW B
SECTION A-A
b
SEATING PLANE
WITH PLATING
BASE METAL
c
L3D
E
b3
e A A
H
A
SEE VIEW B
c2 THERMAL PAD
D1
E1
0°
0.51
0.89
1.40
9.40
6.35
5.33
0.46
0.46
4.32
0.00
e
L3
Note: 1. Refer to JEDEC TO-252AD and AB. 2. Dimension "E" does not include mold flash, protrusions
or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "D" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch
dimensions are not necessarily exact.
θ
L2
L1
L
H
c
D
E
c2
b3
b
A1
1.27 BSC
8°
2.03
1.78
10.41
0.51 BSC
0.71
6.73
6.22
0.89
0.61
5.46
0.13
2.19
MIN.
SYMBOL
A 2.38
MAX.
TO-252-5L
MILLIMETERS
2.67 REF
4.90D1 6.00
4.32E1 5.33
I-35
TO-263-3L PACKAGE OUTLINE DRAWING
E1
D1
SECTION A-A
b
SEE VIEW B
c
L2
E
A A
H
DL1
A
c2
b2 e
LVIEW B
L3
GAUGE PLANE
A1
SEATING PLANE
WITH PLATING
BASE METAL
THERMAL PAD
0°
0.51
--
1.78
14.61
9.65
8.38
1.14
0.38
1.14
0.00
Note: 1. Refer to JEDEC TO-263AB. 2. Dimension "E" does not include mold flash, protrusions
or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "D" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch
dimensions are not necessarily exact.
e
L3
θ
L2
L1
L
H
c
D
E
c2
b2
b
A1
2.54 BSC
8°
1.68
1.78
2.79
15.88
0.99
10.67
9.65
1.65
0.74
1.78
0.25
4.06
MIN.
SYMBOL
A 4.83
MAX.
TO-263-3L
MILLIMETERS
0.25 BSC
6.86D1
6.23E1 --
--
--
I-36
TO-263-5L PACKA GE OUTLINE DRAWING
e
LVIEW B
L3
GAUGE PLANE
A1
SEATING PLANE
WITH PLATING
BASE METAL
E1
D1
THERMAL PAD
SECTION A-A
b
SEE VIEW B
c
E
A A
H
DL1
A
c2
8.38
0°
0.51
1.78
14.61
9.65
1.14
0.38
0.00
Note: 1. Refer to JEDEC TO-263BA. 2. Dimension "E" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side . 3. Dimension "D" does not include inter-lead flash or protrusions.
4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
H
θ
L3
L1
L
e
c2
E
D
c
b
A1
15.88
8°
1.68
2.79
0.25 BSC
0.99
10.67
9.65
1.65
0.74
0.25
1.70 BSC
4.06
MIN.
SYMBOL
A 4.83
MAX.
TO-263-5L
MILLIMETERS
6.86D1 --
6.23 --E1
--
I-37
QFN 12L-3x3x0.6-0.65mm PACKAGE OUTLINE DRAWING
D2
b
12
INDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2
12 11
E
e
11
1
E22
L
120θ
E
e
L
E2
0.35
1.50
D2
D
b
1.50
0.25
0.45
1.80
1.80
0.35
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.55
MAX.
0.20 REF
0.05
0.65
QFN 12L-3x3x0.6-0.65mm
2.90 3.10
2.90 3.10
0.60 0.70
Note : 1. Refer to JEDEC MO-220 VEEC-1. 2. All dimensions are in millimeters, θ is in degrees.
I-38
QFN 12L-3x3x0.75-0.5mm PACKAGE OUTLINE DRAWING
D2
b
12
INDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2
12 11
E
e
11
1
E22
L
14 0θ
E
e
L
E2
0.35
1.25
D2
D
b
1.25
0.18
2.90 3.10
0.50 BSC
0.45
1.80
2.90 3.10
1.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.70
MAX.
0.20 REF
0.05
0.80
QFN 12L-3x3x0.75-0.5mm
Note : 1. Refer to JEDEC MO-220 WEED-3, 5 2. All dimensions are in millimeters, θ is in degrees.
I-39
QFN 12L-3x3x0.9-0.5mm PACKAGE OUTLINE DRAWING
D2
b
12
INDEX AREA(D/2*E/2)
A1
A3
A
D
1
2
12 11
E
e
11
1
E22
L
θ
120θ
E
e
L
E2
0.35
1.50
D2
D
b
1.50
0.18
2.90 3.10
0.45 0.55
0.45
1.80
2.90 3.10
1.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.80
MAX.
0.20 REF
0.05
1.00
QFN 12L-3x3x0.9-0.5mm
Note : 1. Refer to JEDEC MO-220 VEED-3. 2. All dimensions are in millimeters, θ is in degrees.
I-40
QFN 12L-4x4x0.75 -0.8mm PACKAGE OUTLINE DRAWING
D2
b
12
INDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2
12 11E
e
11
1
E22
L
140θ
E
e
L
E2
0.47
0.75
D2
D
b
0.75
0.25
3.90 4.10
0.80BSC
0.63
2.35
3.90 4.10
2.35
0.35
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.70
MAX.
0.20 REF
0.05
0.80
QFN 12L-4x4x0.75-0.8mm
Note: 1. Refer to JEDEC MO-220 WGGB. 2. All dimensions are in millimeters, θ is in degrees.
I-41
QFN 12L-4x4x0.9-0.8mm PACKAGE OUTLINE DRAWING
D2
b
12
INDEX AREA(D/2*E/2)
A1
A3
A
D
1
2
12 11
E
e
11
1
E22
L
θ
120θ
E
e
L
E2
0.35
0.75
D2
D
b
0.75
0.25
3.90 4.10
0.75 0.85
0.75
2.25
3.90 4.10
2.25
0.35
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.80
MAX.
0.20 REF
0.05
1.00
QFN 12L-4x4x0.9-0.8mm
Note : 1. Refer to JEDEC MO-220 VGGB. 2. All dimensions are in millimeters, θ is in degrees.
I-42
QFN 16L-3x3x0.6-0.5mm PACKAGE OUTLINE DRAWING
D2
bINDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2 E
e
1
E2
2
L
14 0θ
E
e
L
E2
0.30
1.05
D2
D
b
1.05
0.18
2.90 3.10
0.50 BSC
0.55
1.80
2.90 3.10
1.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.55
MAX.
0.20 REF
0.05
0.65
QFN 16L-3x3x0.6-0.5mm
Note: 1. Refer to JEDEC MO-220 WEED-4,6,7 2. All dimensions are in millimeters, θ is in degrees.
I-43
QFN 16L-3x3x0.75 -0.5mm PACKAGE OUTLINE DRAWING
D2
bINDEX AREA(D/2*E/2)
A1
A3
A
D
1
2 E
e
1
E2
2
L
14 0θ
E
e
L
E2
0.30
1.05
D2
D
b
1.05
0.18
2.90 3.10
0.50 BSC
0.55
1.80
2.90 3.10
1.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.70
MAX.
0.20 REF
0.05
0.80
QFN 16L-3x3x0.75-0.5mm
Note: 1. Refer to JEDEC MO-220 WEED-4,6,7 2. All dimensions are in millimeters, θ is in degrees.
I-44
QFN 16L-3x3x0.9-0.5mm PACKAGE OUTLINE DRAWING
D2
bINDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2 E
e
1
E2
2
L
14 0θ
E
e
L
E2
0.30
1.05
D2
D
b
1.05
0.18
2.90 3.10
0.50 BSC
0.55
1.80
2.90 3.10
1.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.80
MAX.
0.20 REF
0.05
1.00
QFN 16L-3x3x0.9-0.5mm
Note: 1. Refer to JEDEC MO-220 VEED-4,6,7 2. All dimensions are in millimeters, θ is in degrees.
I-45
QFN 16L-4x4x0.75-0.65mm PACKAGE OUTLINE DRAWING
14 0θ
E
e
L
E2
0.30
2.00
D2
D
b
2.00
0.25
3.90 4.10
0.65 BSC
0.65
2.80
3.90 4.10
2.80
0.35
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.70
MAX.
0.20 REF
0.05
0.80
QFN 16L-4x4x0.75-0.65mm
D2
b
16
INDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2
16 15
E
e
15
1
E2
2
L
Note : 1. Refer to JEDEC MO-220 WGGC-4 2. All dimensions are in millimeters, θ is in degrees.
I-46
QFN 16L-4x4x0.9-0.65mm PACKAGE OUTLINE DRAWING
D2
bINDEX AREA(D/2*E/2)
A1
θ
A3
A
D
1
2 E
e
1
E2
2
L
14 0θ
E
e
L
E2
0.30
2.20
D2
D
b
2.20
0.25
3.90 4.10
0.65 BSC
0.65
2.80
3.90 4.10
2.80
0.35
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.80
MAX.
0.20 REF
0.05
1.00
QFN 16L-4x4x0.9-0.65mm
Note: 1. Refer to JEDEC MO-220 VGGC-2,3,4 2. All dimensions are in millimeters, θ is in degrees.
I-47
QFN 20L-4x4x0.75-0.5 mm PACKAGE OUTLINE DRAWING
20
INDEX AREA(D/2*E/2)
A1
A3
A
D
E
19
1
2
L
D2
E2
e b
θ
1
2
1920
14 0θ
E
e
L
E2
0.35
2.25
D2
D
b
2.25
0.18
3.90 4.10
0.50 BSC
0.45
2.80
3.90 4.10
2.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.70
MAX.
0.20 REF
0.05
0.80
QFN 20L-4x4x0.75-0.5mm
Note : 1. Refer to JEDEC MO-220 WGGD-1, 5 2. All dimensions are in millimeters, θ is in degrees.
I-48
QFN 20L-4x4x0.9-0.5 mm PACKAGE OUTLINE DRAWING
14 0θ
E
e
L
E2
0.35
2.25
D2
D
b
2.25
0.18
3.90 4.10
0.50 BSC
0.50
2.80
3.90 4.10
2.80
0.30
MILLIMETERS
MIN.
SYMBOL
A1
A3
A
0.00
0.80
MAX.
0.20 REF
0.05
1.00
QFN 20L-4x4x0.9-0.5mm
1
2
L
D2
E2
e b
θ
1
2
INDEX AREA(D/2*E/2)
A1
A3
A
D
E
Note: 1. Refer to JEDEC MO-220 VGGD-5 2. All dimensions are in millimeters, θ is in degrees.
I-49
DFN 6L-2x2x0.75-0.65mm PACKAGE OUTLINE DRAWING
e
L
D2
b
A3
TOP VIEW BOTTOM VIEW
SIDE VIEW
E
3 1
A
SEATING PLANE
6
PIN#1
D4
E2MILLIMETERS
MIN.
SYMBOL
A3
A 0.70
MAX.
0.20 BSC
0.80
DFN 6L-2x2x0.75-0.65mm
E
e
L
E2
0.25
0.55
D2
D
b
1.10
0.20
0.65 BSC
0.45
0.85
1.60
0.35
2.00 BSC
2.00 BSC
Note : 1. DIMENSION AND TOLERANCING CONFORM TO ASME Y14.5M-1994. 2.CONTROLLING DIMENSIONS:MILLIMETER,CONVERTED INCH DIMENSION ARE NOT NECESSARILY EXACT. 3.DIMENSION b APPLIES TO METALLIZED TERMINAL AND IS MEASURED BETWEEN 0.10 AND 0.25 mm FROM TERMINAL TIP.
I-50
DFN 8L-3x3x0.75-0.65mm PACKAGE OUTLINE DRAWING
8
PIN#1
D5
E2E
4 1
b
A
SEATING PLANE
L
D2
e
A3
MILLIMETERS
MIN.
SYMBOL
A3
A 0.70
MAX.
0.20 REF
0.80
DFN 8L-3x3x0.75-0.65mm
E
e
L
E2
0.25
1.40
D2
D
b
2.20
0.25
2.90 3.10
0.65 BSC
0.45
1.60
2.90 3.10
2.40
0.35
Note : 1. Refer to JEDEC MO-220K. 2.CONTROLLING DIMENSIONS:MILLIMETER,CONVERTED INCH DIMENSION ARE NOT NECESSARILY EXACT.
I-51
DFN 10L-3x3x0.75-0.5mm PACKAGE OUTLINE DRAWING
10
PIN#1
D6
E2E
5 1
b
A3
A
SEATING PLANE
L
D2
e
MILLIMETERS
MIN.
SYMBOL
A3
A 0.70
MAX.
0.20 BSC
0.80
DFN 10L-3x3x0.75-0.5mm
E
e
L
E2
0.30
1.40
D2
D
b
2.20
0.18
2.90 3.10
0.5 BSC
0.50
1.80
2.90 3.10
2.70
0.30
Note : 1. DIMENSION AND TOLERANCING CONFORM TO ASME Y14.5M-1994. 2.CONTROLLING DIMENSIONS:MILLIMETER,CONVERTED INCH DIMENSION ARE NOT NECESSARILY EXACT.
I-52
DFN 12L-3x3x0.75-0.45mm PACKAGE OUTLINE DRAWING
12
PIN#1
D7
E2E
6 1
b
A3
A
SEATING PLANE
L
D2
e
MILLIMETERS
MIN.
SYMBOL
A3
A 0.70
MAX.
0.20 BSC
0.80
DFN 12L-3x3x0.75-0.45mm
E
e
L
E2
0.30
1.40
D2
D
b
2.20
0.18
2.90 3.10
0.45 BSC
0.50
1.80
2.90 3.10
2.70
0.30
Note : 1. DIMENSION AND TOLERANCING CONFORM TO ASME Y14.5M-1994. 2.CONTROLLING DIMENSIONS:MILLIMETER,CONVERTED INCH DIMENSION ARE NOT NECESSARILY EXACT.
I-53
DFN 12L-3x3x0.75-0.5mm PACKAGE OUTLINE DRAWING
12
PIN#1
D7
E2E
6 1
b
A3
A
SEATING PLANE
L
D2
e
MILLIMETERS
MIN.
SYMBOL
A3
A 0.70
MAX.
0.20 BSC
0.80
DFN 12L-3x3x0.75-0.5mm
E
e
L
E2
0.35
1.60
D2
D
b
2.20
0.18
2.90 3.10
0.50 BSC
0.45
1.80
2.90 3.10
2.40
0.30
Note : 1. DIMENSION AND TOLERANCING CONFORM TO ASME Y14.5M-1994. 2.CONTROLLING DIMENSIONS:MILLIMETER,CONVERTED INCH DIMENSION ARE NOT NECESSARILY EXACT.
I-54
DFN 12L-3x3x0.75-0.5mm (Without Heat Sink) PACKAGE OUTLINE DRAWING
12
PIN#1
D7
E
6 1
b
A3
A
SEATING PLANE
L
e
TOP VIEW BOTTOM VIEW
SIDE VIEW
MILLIMETERS
MIN.
SYMBOL
A3
A 0.70
MAX.
0.203 BSC
0.80
DFN 12L-3x3x0.75-0.5mm (Without Heat Sink)
E
e
L 0.60
D
b 0.20
2.90 3.10
0.500 BSC
0.70
2.90 3.10
0.30
Note : 1. DIMENSION AND TOLERANCING CONFORM TO ASME Y14.5M-1994. 2.CONTROLLING DIMENSIONS:MILLIMETER,CONVERTED INCH DIMENSION ARE NOT NECESSARILY EXACT.
I-55
SC70-3L PACKAGE OUTLINE DRAWING
0.70
0.26
1.10
1.80
1.85
0.08
0.15
0
e
L1
L
e1
c
E
E1
D
b
A2
A1
0.65 BSC
0.46
1.30 BSC
0.42 REF
1.00
1.40
2.40
2.15
0.25
0.40
0.10
-
MIN.
SYMBOL
A 1.10
MAX.
SC70-3L
MILLIMETERS
cAA2
b
WITH PLATING
VIEW BL1
LSEATING PLANEGAUGE PLANE
0.15
A1
SECTION A-ABASE METAL
e1
eD
E
A A
E1
SEE VIEW B
Note: 1. Refer to JEDEC MO-203. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusi 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
ons.
I-56
SC70-5L PACKAGE OUTLINE DRAWING
cAA2
b
WITH PLATING
VIEW BL1
LSEATING PLANEGAUGE PLANE
0.15
A1
SECTION A-ABASE METAL
e1
D
E
A A
E1
SEE VIEW B
e
0.70
0.26
1.10
1.80
1.85
0.08
0.15
0
e
L1
L
e1
c
E
E1
D
b
A2
A1
0.65 BSC
0.46
1.30 BSC
0.42 REF
1.00
1.40
2.40
2.15
0.25
0.30
0.10
-
MIN.
SYMBOL
A 1.10
MAX.
SC70-5L
MILLIMETERS
Note: 1. Refer to JEDEC MO-203AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
.
I-57
SC70-6L PACKAGE OUTLINE DRAWING
cAA2
b
WITH PLATING
VIEW BL1
LSEATING PLANEGAUGE PLANE
0.15
A1
SECTION A-ABASE METAL
e1
D
E
A A
E1
SEE VIEW B
e
0.70
0.26
1.10
1.80
1.85
0.08
0.15
0
e
L1
L
e1
c
E
E1
D
b
A2
A1
0.65 BSC
0.46
1.30 BSC
0.42 REF
1.00
1.40
2.40
2.15
0.25
0.30
0.10
-
MIN.
SYMBOL
A 1
MAX.
SC70-6L
MILLIMETERS
.10
Note: 1. Refer to JEDEC MO-203AB. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-58
TSOT-23 PACKAGE OUTLINE DRAWING
cAA2
b
WITH PLATING
VIEW B
θ
L1
LSEATING PLANEGAUGE PLANE
L2
A1
SECTION A-ABASE METAL
e1
eD
E
A A
E1
SEE VIEW B
0°
0.70
0.30
0.08
0.30
0
e
θ
L1
L
e1
c
E
E1
D
b
A2
A1
0.95 BSC
8°
0.60
1.90 BSC
0.60 REF
0.90
0.22
0.50
0.10
-
MIN.
SYMBOL
A 1
MAX.
TSOT-23
MILLIMETERS
.00
L2 0.25 BSC
2.80 3.00
2.60 3.00
1.50 1.70Note : 1. Refer to JEDEC MO-193C. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-59
TSOT-23-5 PACKAGE OUTLINE DRAWING
0°
0.70
0.30
1.50
2.60
2.80
0.08
0.30
0
e
θ
L1
L
e1
c
E
E1
D
b
A2
A1
0.95 BSC
8°
0.60
1.90 BSC
0.60 REF
0.90
1.70
3.00
3.00
0.22
0.50
0.10
-
MIN.
SYMBOL
A 1
MAX.
TSOT-23-5
MILLIMETERS
cAA2
b
WITH PLATING
VIEW B
θ
L1
LSEATING PLANEGAUGE PLANE
0.25
A1
SECTION A-ABASE METAL
e1
DE
A A
E1
SEE VIEW B
e
.00
Note : 1. Refer to JEDEC MO-193AB. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
.
I-60
TSOT-23-6 PACKAGE OUTLINE DRAWING
0°
0.70
0.30
1.50
2.60
2.80
0.08
0.30
0
e
θ
L1
L
e1
c
E
E1
D
b
A2
A1
0.95 BSC
8°
0.60
1.90 BSC
0.60 REF
0.90
1.70
3.00
3.00
0.22
0.50
0.10
-
MIN.
SYMBOL
A 1.00
MAX.
TSOT-23-6
MILLIMETERS
cAA2
b
WITH PLATING
VIEW B
θ
L1
LSEATING PLANEGAUGE PLANE
0.25
A1
SECTION A-ABASE METAL
e1
D
E
A A
E1
SEE VIEW B
e
Note : 1. Refer to JEDEC MO-193AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-61
TSSOP-8 PACKAGE OUTLINE DRAWING
A1
A
θ
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATING
A2
b
c
A
DE
e
e/2A
E1
SEE VIEW B
e
θ
L
c
E
E1
D
b
A2
A1
0.65 BSC
0.45
0°
0.75
8°
6.40 BSC
0.09
4.30
2.90
0.80
0.05
0.19
0.20
4.50
3.10
0.30
1.05
0.15
SYMBOL
A
TSSOP-8
MILLIMETERS
MIN.
1.20
MAX.
Note: 1. Refer to JEDEC MO-153AA. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-62
TSSOP-16 PACKAGE OUTLINE DRAWING
θ
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATING
A1
AA2
b
c
D
e/2e
EE1
A A SEE VIEW B
e
θ
L
c
E
E1
D
b
A2
A1
0.65 BSC
0.45
0°
0.75
8°
6.40 BSC
0.09
4.90
4.30
0.80
0.05
0.19
0.20
5.10
4.50
0.30
1.05
0.15
SYMBOL
A
TSSOP-16
MILLIMETERS
MIN.
1.20
MAX.
Note: 1. Refer to JEDEC MO-153AB. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
I-63
TSSOP-16 Exposed Pad(Heat Sink) PACKAGE OUTLINE DRAWING
D
e/2e
EE1A A SEE VIEW B
E2
D1
EXPOSED THERMAL PAD(Heat Sink)(BOTTOM CENTER OF PACKAGE)
θ
LVIEW B
0.25
SEATING PLANE
SECTION A-ABASE METAL
GAUGE PLANE
WITH PLATING
A1
AA2
b
c
e
θ
L
c
E
E1
D
b
A2
A1
0.65 BSC
0.45
0°
0.75
8°
6.40 BSC
0.09
4.90
4.30
0.80
0.00
0.19
0.20
5.10
4.50
0.30
1.05
0.15
SYMBOL
A
TSSOP-16 Exposed Pad (Heat Sink)
MILLIMETERS
MIN.
1.20
MAX.
D1
E2
2.00
1.80
4.00
3.40
Note: 1. Refer to JEDEC MO-153AB. 2. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 6 mil per side. 3. Dimension "E1" does not include inter-lead flash or protrusions. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.