Parking Garage LED Fixtures & Retrofit Kits

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 05.06.2014

DESCRIPTION

ORDERING INFORMATION

QG2 1 2 5M 52

Series Light DistPattern

# ofQubes

Color Temp

QG2 1 2 52 5200K

Example: QG2-1-UNVL-2-5M-52-0

The QubePark LED evenly illuminates walkways and parking garages. The classic design of this lumi-

naire seamlessly blends into all forms of architecture. Highly efficient and long-lasting, the QubePark

LED is an ideal replacement for HID. Exceptional high-brightness LEDs result in higher light levels and

significant energy savings. High-efficiency 5200K, 70 CRI LEDs mounted to a metal-core circuit board

and aluminum heat sink, ensure optimal thermal management and long life (L85 124,000 hrs).

FEATURES AND SPECIFICATIONSEquivalent to 175 Metal Halide fixture

Occupancy sensor dims fixture when no occupancy is detected

Mark7 (0-10V) dimming available

Type 5 medium light distribution

Comes fully equipped with power supply

5-year warranty

l

l

l

l

l

l

Input Voltage

ENERGY DATA

5M 5 Medium

Input Voltage (V AC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Correlated Color Temp (K)

L70 Calculated Life (hrs)*


Minimum CRI

Operating Temperature (°C)

120 - 480

70

6250

89

5200K

289,000

124,000

70

-40 to 45

UNVL 120-277

UNVH* 277-480

Parking Garage Luminaire

QubePark

SPECIFICATIONSDimensions (in)

Units/carton

Net Weight (lb)

Environmental Rating

14.15 x 17.0 x 4.0

1

10.25

Wet

Options

0 10V Dimming

1 Occupancy Sensor

Variant

CERTIFICATIONUL Listed USA and Canada File# E338791

DesignLights Consortium qualified

l

l

** Measured at 277VAC

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

* Not DesignLights Consortium qualified

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 04.30.2014

US LED | | | | |

DESCRIPTION

Wall Pack Luminaire2-Qube, 120-277V Input

ORDERING INFORMATIONExample: DSCO2-1-UNV-50-2-00

Eco-Night2 is a wall-mounted LED luminaire designed for outdoor area lighting applications. Using

a mere 67 Watts of power and delivering 6250 lumens, the Eco-Night2 is an ideal replacement for

150-250 Watt metal halide wall pack fixtures. The Eco-Night2’s long L70 life expectancy will not only

minimize or eliminate maintenance and replacement costs, but will also promote environmental res-

toration through reduced CO2 emissions and reduced waste/landfill. Backed by US LED’s standard

5-year warranty, Eco-Night2 is a sound investment in performance, longevity and contributing to the

global green movement.

FEATURES AND SPECIFICATIONSLow voltage Class 2 design

Internal Qube LED module features advanced heat sink

Uses at least 70% less power than equivalent metal halide

5-year warranty

l

l

l

l

ENERGY DATA5000K

120 - 277

67

6250

93

112,000

52,000

80

-40 to 50


Input Voltage (V AC)




L70 Calculated Life (Hrs)*

L85 Calculated Life (Hrs)

Minimum CRI


DSCO2 1 UNV 50 2 00

Series ColorTemp

DSCO2 1 2 00 Standard 50 5000K

Input Voltage120-277

UNV

Variant # of Qubes

SPECIFICATIONS

Dimensions (in)

Units/carton

Net Weight


18.22 x 9.12 x 13.88

1

17.05 lbs

Wet

Options


CERTIFICATIONUL Listed USA and Canada File# E338791

DesignLights Consortium qualified

Dark Sky Friendly Fixture

LM-79

l

l

l

l


Project

Catalog #

Type

Specifications and dimensions subject to change without notice.PRELIMINARY DATA

DATASHEET 04.23.2014

2-Qube Flood Light Fixture

ORDERING INFORMATION

QF3 50

Series Color Light DistPattern

CurrentColorTemp

QF3 50 5000K

Example: QF3-1-UNVL-5M-50-1050

DESCRIPTIONQubeFlood3 is a flood light LED luminaire designed to be mounted vertically or horizontally in

outdoor applications. High-performance LEDs provide light where you need it, at a fraction of the

operating cost of HID technologies. With a lifetime of more than >200,000 hours*, QubeFlood3 is the

ideal replacement for 250W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are

available for easy and fast installation.

FEATURESSlip-fitter, Pole Mount and Trunnion Mount options available

Type 3M, 5M and lambertian light distribution pattern

5-year warranty

l

l

l

QubeFlood3

CERTIFICATIONUL pendingl

ENERGY DATAInput Voltage (V AC)







Minimum CRI


SPECIFICATIONSDimensions

Units/carton

Net Weight


14.25” x 14.25” x 3.75”

1

11 lbs

Wet

120-277/277-480

96

10,300

107

5000K

>200,000

182,000

70

-40 to 40

UNVL 120-277

UNVH 277-480

1050 Standard Flux

† Special order, not stocked

1 Bronze

2 White †

3 Black †



5M

3M

12 Lambertian

PRODUCT DESCRIPTION

Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Luxeon T High Power LED’s in 3 clusters.

Optional hardware includes optic packages to meet any distribution requirement: Type 2, Type 2 Wide, Type 3, 15, 25, 50,

75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high

wattage HID lamps in a small footprint. Available as both retrofit and new architectural track and combo recessed fixtures.

LED retrofit kits up to 1,000 watt equivalent available

Superior active cooling coupled with proprietary thermal management design ensures the M21LED Module maintains

efficiency at high temperatures, color consistency and low light degradation through its rated life of 100,000Hrs

10 Year Warranty LEDs & Magnetic Levitation Cooling Fan, 5 Year Driver Warranty

Lumen maintenance regulator circuit

LED chips slightly degrade over time. The M21LED Module has a sophisticated regulator circuit which maintains lumen output

over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation

degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for

100,000hrs +!

561 Energy Saver Program

When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation,

dimming 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful

program saves 3 hours of operation per night over 1100 hours per year!

Wattage selection: Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full

output and therefore can adjust down to the setting you want.

Approximate wattages:

100%- 60w equivalent to 175w Metal Halide



25%-30w equivalent to 50w Metal Halide

Future Proof Module

As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED

Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire

manufacturers to plan and design new luminaire ranges for the coming

years.

Benefits

New Lumen Maintenance Circuit

Increased efficacies

Color consistency increased

Dimming options include 0-10V, Wireless

Rated Life 100,000Hrs

High Lumen Output

Substantial energy savings

Enables Intelligent controls and networking

Small Footprint-4.50”

Applications

Offices (areas such as hallways, receptions, boardrooms, etc.)

Hotel lobbies and receptions areas

Retail high-end shops

Commercial/Industrial Interior Space (warehouse, garage)

Commercial/Industrial Exterior Space (parking lots, streets, roadways)

Additional protection

24V Line Voltage Variation regulation

Under Voltage Protection 21v Minimum

Over Voltage Protection 30V shut off

Reset 27V or lower

Over Temp-thermistor-90C shut off

Below 85C turns back on

END USER MODULE ADAPTERS & Fixtures

The M21LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings.

It is available in new Track and Recessed fixtures.

Brite Energy Solutions

Tom Knoblock

308-367-4542

[email protected]

mailto:[email protected]

www.terraluxillumination.com

TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 1

The TerraLUX Linear LED Engine is a fully-integrated, self-contained, plug-and-play LED solution for lighting fixture man-

ufacturers and retrofit installations. The Engine is AC-mains compatible, dimmable, and requires no additional drivers

or special sockets. A compact form-factor, flexible mounting options, and complete integration of drive electronics and

optics, combined with TerraLUX’s patented LEDSense® thermal management circuitry means simple, low-cost integra-

tion, fast time to market, and reliable, long-term operation and lumen maintenance. The TerraLUX Linear LED Engine is

an ideal solution for a wide variety of applications including wall sconces, ceiling fixtures, and recessed applications.

Linear Line Voltage LED Engine

120V or 100-277V AC input

Dimmable with standard phase-dimmers (120V version) or 0-10V dimming systems (100-277V)

Available in 3 sizes : 4”, 6” and 8”

Patented LEDSense® Thermal Management simplifies integration and ensures reliability and lumen maintenance

Available in 2,700K, 3,000K, 3,500K and 4,000K

>50lm/W at 3000k CCT and 85 CRI (120V)

L70 = 60,000 hours

IP-65 Rated

UL Recognized Component

UL 1598C Classified (LED Retrofit Kit)

ENEC Certified Product

5-year warranty

FCC Compliant

RoHS Compliant, Pb Free

INTRODUCTION

FEATURES

Product Specification

http://www.terraluxillumination.com/assets/PIA-12-Logo.jpg



PRODUCT CHARACTERISTICS

Notes:

Typical Performance @ 25°C Heatsink temperature, Tc. See Relative Light Output vs Temperature and LEDSense® graphs, page 3, for temperature & Power de-rating.

All specifications subject to tolerance of ± 10%

(*) Power draw may be affected by installation with a dimmer—120V version only

PHOTOMETRY

Relative Candela Distribution (3000K—120° lambertian)

Max Candela Value : 154.7

Vertical Plane 90°-270° (Max)

Vertical Plane 0°-180°

Horiz. Cone 5° (Max)



LEDSense® OPERATION, THERMAL DERATING, & LUMEN MAINTENANCE

TerraLUX Linear LED Engines employ TerraLUX’s patented LEDSense® Thermal Management Technology to automati-

cally provide maximum light output in various fixtures and operating conditions while assuring long-term lumen

maintenance. LEDSense® regularly measures the operating temperature and ensures compliance with a pre-

programmed temperature and drive-current profile. This profile is based on the LED manufacturer’s LM-80 data report

and minimum L70/60,000 hour lumen maintenance curves (extrapolated per IES TM-21-11). LEDSense® is always ac-

tive, and will compensate for variation in thermal conditions due to heatsinking, ambient air, Engine positioning, or any

other variable that affects the operating temperature. The Thermal De-rating curve below identifies the relative light

output that can be expected under various thermal conditions. The LEDSense® Power Curve identifies the reduction in

input power over temperature.



Product Safety Evaluation 120V • UL Standards 8750 (Recognized Component), 1598C (LED Retrofit Kit) • CSA Standard C22.2 No. 250.0-08 100-277V • UL Standards 8750 (Recognized Component), 1598C (LED Retrofit Kit) • CSA Standard C22.2 No. 250.0-08 • ENEC License ENEC-00404 —tested according to EN 62031:2008 (Ta 55°C Tc 85°C)

Radio Frequency Emissions • FCC Part 15, Unintentional Radiators Class A. (120V) • FCC Part 15, Unintentional Radiators Class B. (100-277V)

Reduction of Hazardous Substances (RoHS) European Council Directive 2002/95/EC

Input Current Current : ≤ 120 mA

Input Voltage Range/Frequency Range 120V 90-132 VAC / 47-63Hz

100-277V 90VAC—300VAC / 47Hz—63Hz

Power Factor >=0.90

Electrical Fast Transients IEC/EN 61000-4-5 ±1 kV

Surge IEC/EN 61000-4-5 ±500V Differential mode / ±1 kV Common mode

Voltage Harmonics IEC/EN 61000-3-2

Voltage Dips and Interrupts Mains dips of 30% for 500ms, 95% for 10ms, and interruptions of 95% for 5s

Electrostatic Discharge ± 6 kV Contact mode, ± 10 kV Air Gap

Shock and Vibration Operating – Non Operating

Impact 1 m product drop, 1.3 m steel ball impact

Operating Temperature -40°C to +55°C, 0 to 95% R.H. / 153 hr

Storage Temperature -40°C to +85°C / 60 hr. followed by 20°C to 85°C, 5 to 95% R.H. / 80 hr

Ingress Protection (Water, Dust) IP65

Corrosive Environment 96 Hours Salt Fog Test (5% salt fog at 95°C) per Mil-Std 810F, Method 509.4

Dimmer Compatibility See “Dimmer Compatibility Matrix”

Dimming Standard Conformance NEMA SSL 6-2010 Relative light output vs. phase angle (120V)

Lumen Maintenance L70 =60,000hr per IES TM-21-11 (Based on LED Manufacturer’s measurement per IES LM-80-08 @ 10.000hrs). To be extended as additional data becomes available

Reliability Demonstration 100 units running continuously for 6,700 Hrs each (120V—4”)

Mean Time Between Failures (MTBF) 120V - 4”: >680,000 Hrs. ; 6”: > 275,000 Hrs. ; 8”: > 400,000 Hrs. 100-277V - 4”: >530,000 Hrs. ; 6”: > 312,000 Hrs. ; 8”: > 260,000 Hrs.

TESTS AND CERTIFICATIONS



MECHANICAL DIMENSIONS

All dimensions in inches

Thermal Measurement Point (Tc)




MOUNTING OPTION: IN-LINE



MOUNTING OPTION: OFFSET




MOUNTING OPTION: MULTI-UNIT OFFSET


Engine Dim A Dim B

4” 4.08 8.9

6” 6.08 12.9

8” 8.08 16.9



Optional Undermount Bracket Kit

All dimensions in mm

4 inch (TLMA-937000008)

6 inch (TLMA-937000009)

8 inch (TLMA-937000010)

Kit Content:

Undermount plate

2 x self drilling flat head screws (mounting to fixture)

2 x Phillips pan head (mounting light engine to plate via straight brackets provided with Retrofit Kit)



TerraLUX, Inc.

1830 Lefthand Circle

Suite B

Longmont, CO 80501

Phone: 303-442-4960

E-mail: [email protected]

www.TerraLUX.com

CONTACT INFORMATION

PRODUCT SELECTION & PART NUMBER GUIDE

(Example)

(1) Light engine delivered with Thermal Pad (UL registered Component)

(2) Retrofit Kit Content (UL 1598C Classified):

LED Light Engine + Thermal Pad

2 x straight mount brackets

2 x Offset Brackets 3 x wire nuts

2x sets of self-tapping screws (short and long)

Retrofit Instructions

(*) A more diffuse distribution is available by adding an optional diffuser (180°) distribution. Please refer to the list of optional accessories here below.

Optional Accessories :

Documents

Parking Garage LED Fixtures & Retrofit Kits