3 . W i e n e rProduktionstechnikK o n g r e s s 28. - 29.9 .2016

www.produkt ionstechnik .a t

HOST

www.i ft .a t

Edith BerghoferTel.: +43 1 7740274 41Mail: berghofer@ift.at

CONFERENCE VENUE

www.hofburg .com

11:00 – 12:15, 8th Parallel session - TECHNOLOGY

„Research on the Cutting Texture by Turn-milling Process“Prof. Yukitoshi IharaDepartment of Mechanical EngineeringOsaka Institute of Technology, Japan „History and State of the Art of Production Technologies in Slovenia“Prof. Janez Kopac, Prof. Franci PusavecDepartment for Management of Production TechnologiesUniversity of Ljubljana, Slovenia

„Gentle solutions for very hard tasks. (P)ECM technology - More than just deburring!“Richard Keller, Member of the BoardEMAG ECM GmbH

11:00 – 12:15, 7th Parallel session - MACHINES

11:00 – 12:15, 9th Parallel session - AUTOMATION

„Automation and digitalization of manufacturing“Bernd Grieb, Managing DirectorFASTEMS SYSTEMS GmbH „Flexible automation in praxis; Chance for higher productivity“Gennaro Teta, Managing Director, omnino AG „Traceability as basis of Industry 4.0“Horst Lang, Head of Global Engineering QualitySebastian Lichtenberger, Global EngineeringFesto AG & Co.KG

12:30 – 13:45 Lunch break

„Human Centered Assembling Systems using Industry 4.0-Technologies“Michael Ebeling, Managing DirectorKOSTWEIN Maschinenbau GmbH „A Methodology to optimize the Single-Item and small batch Production System“Philipp Kreuzer, COOKresta Industrial Plants GmbHFarhang Akhavei, Institute of Production Engineering and Laser Technology, TU Wien „Quality in the Sense of Big Data and Industry 4.0?“Dr. Edgar Dietrich, Q-DAS GmbH „Smart Factory @ Magna Steyr“Christoph Krammer, MAGNA STEYR AG & Co.KG

13:45 – 14:55 Keynote presentations 3rd session

14:55 – 15:15 Coffee break

September 28th - 29th, 2016Hofburg Vienna

3. Wiener Produktionstechnik Kongress

ADAPTIVE & SMART MANUFACTURINGMACHINE - TECHNOLOGY - AUTOMATION

PROGRAM

„Light as a Key Capability“Dr. Peter Leibinger, Vice ChairmanTRUMPF GmbH + Co. KG „Control cabinet production & engineering 4.0.“ Maximilian Brandl, Managing DirectorEPLAN Software & Service and CIDEON HoldingDr. Thomas Steffen, Managing Director R & DRITTAL GmbH & Co.KG „Digitalization - challenges for a component manufacturer“F. Peter Mitterbauer, CEO & ChairmanMIBA AG „Industry 4.0 - Impact for the Austrian machinery business“Christian Knill, President & CEOKnill Energy Holding GmbH

15:15 – 17:15Keynote presentations 4th session

19:00 200-Years-Jubilee Celebration

PARTNERS

COPYRIGHTAutomation: IFT / Martin FuchsHofburg - exterior view: Hofburg Wien / Manfred SeidlHofburg - ceremony hall: Hofburg Wien / Lukas KirchgasserPortrait Prof. Altmütter: Technisches Museum WienPortrait Prof. Bleicher: TU Wien / R. Tanzer

REGISTRATION

HOSTTU WienInstitute for Production Engingeering and Laser TechnologyGetreidemarkt 9, Building BA, 8th Floor1060 Vienna, AUSTRIA

CONTACT

www.i ft .a t

Hofburg ViennaInternational Congress CentreHeldenplatz1014 Wien, AUSTRIA

REGISTRATIONwww.produktionstechnik .at/anmeldung

2001 8 1 6 - 2 0 1 6

J A H R E

PROGRAM

WEDNESDAY,SEPTEMBER 28th, 2016

09:30 – 10:00 Greetings

12:00 – 13:15 Lunch break

„Developments in Production Technology. From the Past to recent Times.“Prof. Fritz Klocke, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen UniversityFraunhofer Institute for Production Technology „Industry 4.0 – On the way to a digital enterprise“Roland Bent, Vice PresidentPhoenix Contact GmbH & Co. KG, Blomberg „Industrial Data Platform for Industrie 4.0“Hubert Tardieu, CEO AdvisorAtos SE

„Recent Advancement of Manufacturing Technologies: Integration of Traditional and Non-traditional Processing“Prof. Kazuo YamazakiDepartment of Mechanical and Aerospace Engineering University of California

10:00 – 12:00 Keynote presentations 1st session

„Industrie 4.0 in the high volume production towards fl exibility“Dr. Sabine Herlitschka, CEO & CTOInfi neon Technologies Austria AG „Latest machining technologies using technology cycle“Dr. Eng. Masahiko Mori, PresidentDMG MORI CO., LTD. „SMART Manufacturing – Vision or Reality?“Jacek Kruszynski, Vice President EngineeringWalter AG, Tübingen, Germany

13:15 – 14:45Keynote presentations 2nd session

14:45 – 15:15 Coffee break

15:15 – 16:55, 2nd Parallel session - TECHNOLOGY

„Simulation based optimization of details of cutting tools and cutting processes“Prof. Dirk BiermannInstitute of Machining Technology (ISF), TU Dortmund „Smart gear hobbing – how simulation can improve this complex process“Prof. Bernhard KarpuschewskiInstitute of Manufacturing Technology and Quality Management (IFQ), Otto-von-Guericke University of Magdeburg „Improving productivity in machining processes through modeling“Prof. Erhan BudakManufacturing Research Laboratory, Sabanci University „On the Maturity of Cutting Processes for the Digital Era“Prof. Gerry ByrneDirector of the Manufacturng Research Centre University College Dublin

„Industrie 4.0 für den Maschinen- und Anlagenbau“Prof. Konrad Wegener, Prof. Andreas KunzInstitute of Machine Tools and Manufacturing (IWF)Department of Mechanical and Process Engineering ETH Zürich „Die nächste Generation der Werkzeugmaschine –Evolution statt Revolution“Prof. Michael F. Zäh, Institute for Machine Tools and Industrial Management (iwb), TU München „Effi cient implementation of I4.0 with the VDMA toolbox based on use cases“Prof. Jürgen FleischerInstitute of Production Science (wbk)Karlsruhe Institute of Technology (KIT) „Innovative hydraulic and cooling supply unit for machine tools“Prof. Christian Brecher, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University

15:15 – 16:55, 1st Parallel session - MACHINES

15:15 – 16:55, 3rd Parallel session - AUTOMATION

„Cyber-physical production systems: Challenges and possi-bilities for the Central and Eastern European region“Prof. László MonostoriInstitute of Computer Science and Control, Hungarian Academy of Sciences, Fraunhofer Project Center on Production Management and Informatics

19:00 Congress Dinner

THURSDAY,SEPTEMBER 29th, 2016

„Optimal situationally adapted production systems based on an active state machine-process-model“Prof. Steffen IhlenfeldWerkzeugmaschinenentwicklung und adaptive Steuerungen, TU Dresden „Intelligent components for self-optimizing machine tools – basis for Industrie 4.0“Prof. Hans-Christian MöhringInstitute of Manufacturing Technology and Quality Management (IFQ), Otto-von-Guericke University MagdeburgJun.Prof. Petra WiederkehrInstitute of Machining Technology (ISF), TU Dortmund

„Grinding wheels - Complex tools for high effi ciency precision machining“Dr. Markus Weiß, Head of Technology DepartmentTyrolit - Schleifmittelwerke Swarovski K.G.Harald PehertstorferInstitute for Production Engineering and Laser TechnologyTU Wien „Improved machining processes by sensor and actuator integration“Prof. Frank Barthelmä, Managing DirectorSociety for Manufacturing Technology and Development Schmalkalden e.V.

09:00 – 10:40, 4th Parallel session - MACHINES

„Development of complex technical systems – challenges and approaches“ Prof. Detlef GerhardInstitute for Engineering Design and Logistics Engineering(MIVP), TU Wien „CyberCAM: the new evolutionary CAM system to solve the Smart Manufacturing challenges of Industry 4.0“Dan Frayssinet, CEODP Technology Corp. „Optimization of design- and NC-processes through real-time data of resource information from the production in the Smart Factory“Thomas Mücke, Senior ConsultantTDM Systems GmbH

„Advanced Manufacturing Research at the University of Wisconsin-Madison“Prof. Frank E. PfefferkornDepartment of Mechanical EngineeringUniversity of Wisconsin-Madison „Tools for dynamic face milling at depth of cuts upto 3 mm. / Coolant driven HSC spindle up to 40,000 min-1“Kurt Brenner, Member of the Executive BoardISCAR Germany GmbH „Coatings for Cutting of High Performance Materials“Dr. T. Cselle, CEOPLATIT AG, Selzach, Switzerland „A Study on Surface Feature Formation Mechanism when Milling Grey Cast Iron“Prof. Masakazu Soshi, Kyle OdumDepartment of Mechanical and Aerospace Engineering University of California

09:00 – 10:40, 5th Parallel session - TECHNOLOGY

„Smart Automation Solutions for Smart Manufacturing“Dr. Gernot Bachler, Business Manager Automation Software / MOTION, Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. „Industrie 4.0 – A chance to bring industrial production back to Europe“Walter Sticht, CEO & ownerSTICHT Technologie GmbH

„Effi cient manufacturing down to a lot size of 1“Dr. Jens KummetzHead of Marketing and Product Management ControlsDR. JOHANNES HEIDENHAIN GmbH

„HOERBIGER 1-1-1: Turning high-mix / low-volume manu-facturing from a constraint into a competitive advantage“Hannes Hunschofsky, COO & Head of Production DivisionHOERBIGER Compression Technology Holding

09:00 – 10:40, 6th Parallel session - AUTOMATION

10:40 – 11:15 Coffee break

11:00 – 12:15, 7th Parallel session - MACHINES

„Increasing Productivity through the Application of Hybrid Manufacturing Technologies“Prof. Bert Lauwers, Division Production Engineering, Machine Design and Automation (PMA), KU Leuven, Belgium „Adaptive and Smart Machining of Composites“Prof. Helmi AttiaMechanical Engineering DepartmentMcGill University, QC, Canada