Parade - Alumasc Water Management Solutions · Gatic Parade floor access covers provide easy access to under floor services using lifting keys to remove the cover. Cover sections

Stainless Steel and Aluminium Access Covers and Frames

Technical Details

Parade

Uniclass July 2014L217241

CI/SfB (52.9)

2 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]

TextFeatures and benefits

MaterialsThe majority of the Gatic Parade range of floor access covers for hard floor finishes can bemanufactured in either aluminium or stainless steel, giving you the freedom to choose thematerial most suitable to your particular project.

ConfigurationTo ensure total versatility our floor access covers can be used singly, in continuous runs as ductcovers or over large areas as a multispan cover.

SizesGatic Parade floor access covers are custom made to your exact specification, between statedmaximum and minimum sizes. Custom made products can be manufactured without incurring a time or cost surcharge - All products are manufactured to tolerances in accordance with BS EN 22768-1:1993 – ISO 2768-1: 1989 – Class C.

QualityEvery aspect of Gatic Parade floor access covers has been designed and manufactured with quality in mind:

n Covers are precision made to avoid distortion.

n Lifting blocks are anchored to the inner frame.

n Stainless steel securing bolts are stiletto heel proof.

n Top edge seal on aluminium covers helps prevent dirt, grout or grinding waste ingress.

n Base plates and reinforcement are galvanised steel to resist corrosion, contact our Technical Department if products are to be used in a corrosive environment such as swimming pools.

FittingQuick and easy to install ensuring minimum disruption, full installation instructions provided.Access to network of skilled installation experts is available if required.

Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 3

Gatic Parade floor access covers provide easy access to under floor services using lifting keys to remove the cover. Cover sections are tapered for easy removal and frame sections give a good key to bedding mortar.

Load bearing capacitiesVarious load bearing capacities, from light duty or pedestrian to a heavy duty pneumatic wheelloading, up to 5 tonne, ensure the suitability of the Gatic Parade range of access covers whatever the location.

Fire ratingsFire ratings up to three hours are available on most floor access covers.

WeightThe weight of the access cover should be taken into account where ease of handling is animportant consideration. In all cases reference should be made to the Manual HandlingOperations Regulations 1992, which implement European Directive 90/269/EEC. If loads areexcessive, consideration should be given to the use of hydraulic lifters, or our AUH/ALIFT or SSH/ALIFT range.

AUH/ALIFT and SSH/ALIFT are gas spring assisted hinged access covers designed specifically for situations where either frequent access is required or ease of handling is critical.

Optional extrasIn order to give users exactly the floor access cover you require a number of optional extras areavailable:

n Double Seals on the AUL, SSL, AUM, SSM, SSH, AUH/ALIFT and SSH/ALIFT to provide the highest levels of hygiene and security.

n Brass, stainless steel or coloured high impact pvc show edges on aluminium ensure aesthetic choice.


TextGatic Parade – Technical Details Introduction

GATIC PARADE is a comprehensive range of single, duct and multispan high quality Aluminium and Stainless Steel Access Covers. The Gatic Parade range can be used in any situation where ease of access to services and a high quality floor finish is required.

Cover infillCovers are designed to accept various infill to match the surrounding surface. When grinding of the surface is required to polish marble or terrazzo, up to 2mm can be removed from the top of the aluminium or brass cover and frame, without detriment to the unit.

MaterialAluminium Covers are produced from Aluminium Alloy grade 6063 which is noted for its high resistance to corrosion and impact.

GATIC ALUMINIUM PARADE Covers can have either Aluminium (Type AUL, Type AUM or Type AUH/ALIFT), or a brass edge showing on the surface (Type AUL/B – AUM/B).

Gatic Parade Stainless Steel Covers are to grade 304 or 316 (Type SSL – SSM – SSH/PS – SSH/ALIFT).

SealingAll standard covers are fitted with double seals to prevent the ingress of dirt and water into the pit.

Base plateAll covers are fitted with a solid Galvanised Steel Base Plate and reinforcing to assist installation at site.

Locking boltsDouble Sealed Covers are fitted with socket head locking bolts. Unsealed covers are fitted with blanking bolts.

KeysStandard lifting keyholes utilise a threaded key for security during cover removal.

InstallationEach consignment of goods is accompanied by written installation instructions.

InterchangeabilityStandard sized covers are normally interchangeable.


Load classificationCovers are designed to withstand the working loads as shown in the following chart when correctly installed. Where stated, wheel loadings apply to slow moving vehicles with pneumatic tyres.

Light Duty: Pedestrian traffic, (including wheeled trollies, sack trucks, etc).Type AUL and Type SSL.

Medium Light Duty: Up to 3 tonne slow moving pneumatic tyre wheel load, (cars and light delivery vehicles).Type AUM and Type SSM.

Medium Duty: Up to 5 tonne slow moving pneumatic tyre wheel load, (including cars and light delivery vehicles).Type SSH/PS – For external paving slabs including granite & concrete.Type AUH/ALIFT – Aluminium AssistLift Covers for ceramic tiles, marble, terrazzo, resin, wood and all hard floors.Type SSH/ALIFT – Stainless Steel AssistLift Covers for ceramic tiles, marble, terrazzo, resin, wood and all hard floors. Fire ratingsThe following Fire Ratings have been tested in accordance with BS 476: Part 20: 1987

COVER WEIGHTS WHEN FILLED WITH CONCRETE (APPROX)

Cover Type Single Duct Multispan

Type AUL & SSL 1 Hour • •

Type AUM & SSM 3 Hours 2 Hours 2 Hours

Type SSH/PS 3 Hours 2 Hours 2 Hours

AUH/ALIFT & SSH/ALIFT 3 Hours • •

Cover Type Cover Weight

AUL & SSL 90 kg/m2

AUM & SSM 155 kg/m2

SSH/PS 220 kg/m2

Cover Type Cover Operating Wt.

AUH/ALIFT & SSH/ALIFT 20 kg


Single Covers & Frames – Type AUL / AUL/B and SSL

Loading

Light Duty pedestrian traffic (Including small wheeled trollies, sack trucks, etc.)Typical floor finishCeramic tiles, marble, terrazzo, concrete resin, wood, and all hard floors.

Optionsn Aluminium (Type AUL) n Aluminium with Brass edge (AUL/B) n Stainless Steel (Type SSL)

*delete as appropriate

Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 750 x 750 for this loading Group.

Specification…… in No. ………. X………… single recessed cover and frame, Type AUL or AUL/B or SSL*, with 1 hour fire rating to BS476: Part 20: 1987*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts*

floor finish (eg. ceramic tiles)

structural concrete frame anchor lug aluminium frame carrier

reinforcement

double sealsouter frame

secured to timber

timber supportfor outer frame

secured to floor joist

stainless steel socket

floor board

floor joist

frame width: 61.5 mm3.5 mm nominalframe width: 61.5 mm75mm

recommended rebate: 200 mm

reco

mm

ende

d re

bate

: 60

mm

fram

e de

pth:

50

mm

stainless steelshow edge

stainless steel cover frame

socketheadsecuring bolt

stainless steel corner plate

hardwood flooring

�oor �nish(eg. ceramic tiles)

aluminiumshow edge

top edge seal

structural concrete in�ll reinforcement

overall frame size

double seals

frame width: 56 mm4 nominal 4 nominal

clear opening frame width: 56 mm


timber support forouter frame secured

to �oor joist

reco

mm

ende

d re

bate

: 60

mm

fram

e de

pth:

50

mm

socket head securing bolt

ply in�ll

blanking bolt used on non-sealed covers decorative

edge

hardwood �ooring

�oor board

�oor joist

steelbase plate

Type AUL

Type SSL

Type AUL

Type SSL

Pit Clear OpeningLength x Span

150 x 150300 x 300450 x 300600 x 300750 x 300450 x 450600 x 450750 x 450 600 x 600750 x 600750 x 750


TextDuct & Trench Covers & Frames – Type AUL / AUL/B and SSL

Loading

Light Duty pedestrian traffic (Including small wheeled trollies, sack trucks, etc.)Typical floor finishCeramic tiles, marble, terrazzo, concrete resin, wood, and all hard floors.

Optionsn Aluminium (Type AUL) n Aluminium with Brass edge (AUL/B) n Stainless Steel (Type SSL)


clip-on anchor lug showingalternative positions top edge seal socket head securing bolt

double seals

4 nominal

clear openingrecommended �xing rebate for anchor lug = 165 mm

reco

mm

ende

d re

bate

: 60

mm

fram

e de

pth:

50

mm

frame width: 56 mm


overall frame size

blanking boltused onnon-sealedcovers

�oor �nish (e.g ceramic tiles)stainless steel

show edgestainless steel cover frame

aluminium frame carrier



reinforcement

double seals


3.5 mm nominalframe width: 61.5

structural concrete

75mm

frame anchor lug

recommended rebate: 200mm

reco

mm

ende

d re

bate

: 60

mm

fram

e de

pth:

50m

m

Type AUL

Type SSL

Type AUL

Type SSL

Standard Sizes AvailableComplex layouts of duct or trench runs can be created – Sizes from 100 to a maximum clear opening span of 600mm for this loading group.

Standard Sizes AvailableRecessed duct covers and frames, Type AUL or AUL/B or SSL*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts* as per drawing.

600 c.o. maximum span

removable support beam 100 c.o. minimum span

any

leng

th



150 x 150300 x 300450 x 300600 x 300750 x 300450 x 450600 x 450750 x 450 600 x 600750 x 600750 x 750900 x 750900 x 900

Single Covers & Frames – Type AUM / AUM/B and SSM

Loading

Medium Light Duty Up to 3 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).

Typical floor finishCeramic tiles, marble, terrazzo, concrete, resin, wood, and all hard floors.

Optionsn Aluminium (Type AUM) n Aluminium with Brass edge (AUM/B) n Stainless Steel (Type SSM)


Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 900 x 900 for this loading group.

Specification…… in No. ………. X………… single recessed cover and frame, Type AUM or AUM/B or SSM*,with 3 hour fire rating to BS476: Part 20: 1987*,Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts*

hard paving aluminiumshow edge

overall frame size

timber supportfor outer frame

secured to �oor joist

frame width: 56 mm4 mm nominal

clear opening

reco

mm

ende

d re

bate

: 85

mm

fram

e de

pth:

75

mm

4 mm nominal

frame width: 56 mm




hardwood �ooring

�oor board

�oor joist

reco

mm

ende

d re

bate

: 85

mm

fram

e de

pth:

75

mm

oor �nish (e.g ceramic tiles)

reinforcementouter frame secured to timber

double seals

structural concrete

3.5 mmnominal

3.5 mmnominal frame width: 61.5 mm

oor board

oor joist75mm frame width: 61.5 mm


frame anchor lug

stainless steel sockettimber supportfor outer frame

secured to oor joist

stainless steel outer frame

stainless steel show edge

aluminium frame carrier



hardwood

ooring

Type AUM

Type SSM

Type AUM

Type SSM


Duct & Trench Covers & Frames – Type AUM / AUM/B and SSM

Loading





Standard Sizes AvailableComplex layouts of duct or trench runs can be created. Sizes from 100 to a maximum clear opening span of 900mm for this loading group.

SpecificationRecessed duct covers and frames, Type AUM or AUM/B or SSM*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts* as per drawing.

hard paving clip-on anchor lug showingalternative positions

top edge seal steel base platesockethead

securing bolt

overall frame size


double seals

4 mm nominal

clear openingframe width: 56 mm

recommended rebate for anchor lug: 175 mm

reco

mm

ende

d re

bate

: 85

mm

fram

e de

pth:

75

mm

stainless steelsocket

�oor �nish (e.g ceramic tiles)

stainless steelouter frame

double seals

reinforcement

stainlesssteel socket

3.5 mm nominal3.5 mm nominalframe width: 61.5 mm


frame anchor lug

75mm

reco

mm

ende

d re

bate

: 85

mm

fram

e de

pth:

75

mm

structural concrete

stainless steel show edge

aluminiumframe carrier



Type AUM

Type SSM

Type AUM

Type SSM


Multispan Covers & Frames – Type AUM / AUM/B and SSM

1300

1450

1600

1750

1900

2000

2150

2300

2450

2600

3000

2850

2700

3150

3300

3450

3600

3750

3900

Pit clear opening length (L) mm

Beam centres mm

Pit

clea

r op

enin

g sp

an (S

) mm

4 p

arts

3 b

eam

s3

par

ts 2

bea

ms

2 p

arts

1 b

eam

2 parts 3 parts 4 parts

A B C D E

2750

2900

6 part (2x3) recessed multispan cover with 2 removable support beams






L = Pit clear opening length S = Pit clear opening spanCover BeamInset lines denote pit opening

L

A

SB

L

A

SB

L

A

SB

L

A

S B

C

L

A

S B

C

L

A

C

S B

L

A

SB

C

D

L

A

SB

C

D

L

A

C

D

SB

5 p

arts

4 b

eam

s




L

A

S

B

C

D

L

A

S

B

C

D

L

A

C

D

E E E

S

B

4 part (2x2) recessed multispan cover with 1 removable support beam




1300

1450

1600

1750

1900

2000

2150

2300

2450

2600

2750

2900

3300

3150

3000

3450

3600

3750

3900

4300

4150

4000

4450

4600

4750

4900

650

725

800

875

950

650

725

725

800

800

950

950

800

950

950

950

950

650

725

800

875

950

700

675

850

850

1000

850

1000

850

850

850

1000

1000

650

725

725

800

800

950

950

850

850

850

1000

1000

800

800 850 850 650

800 700 700 800

800

950

800

950

800

850

950

950

1000

1000

1000

1000

850

1000

850

1000

1000

800 850 1000 850

800 850 850 850

800 850 700 850

1000

1000

1000

800

800

800

800

850

950

950

Loading


Then select product Type from opposite page.

Refer to the table to identify which cover and beam configuration you require against pit clear opening length (L) and pit clear opening span (S). All dimensions are in millimetres.

Note: For other pit clear opening sizes please refer to our technical department.


aluminiumconnecting plate

removablecrossmember

cover junctionspacer section steel support beam

removablecrossmember

through removablecrossmember atjunction of covers

87 x 30 x 6 mmaluminium channel

beam pocket rebate width: 250 mm

110 mm

loose plate on mortarbedding for correct level

pressed steel wallbox

showing beam pocket in concrete

85 m

mva

ries

acco

rdin

g to

spa

n

varie

s ac

cord

ing

to s

pan

Multispan Covers & Frames – Type AUM / AUM/B and SSM

Loading




Gatic Parade 2 hour fire rated Multispan Aluminium Recessed Covers and Frames with Removable Beams aluminium/brass* edging, top edge dirt seal, mechanically jointed corners, galvanised baseplate and reinforcement, double sealed with socket head securing bolts/unsealed with blanking bolts* to suit a pit clear opening of …… x …… suitable for Medium Light Duty – 3 tonne slow moving pneumatic wheel load Type AUM or AUM/B*

Gatic Parade 2 hour fire rated Multispan Stainless Steel Recessed Covers and Frames with Removable Beams, galvanised baseplate and reinforcement, double sealed with socket head securing bolts/unsealed with blanking bolts* to suit a pit clear opening of …… x …… suitable for Medium Light Duty – 3 tonne slow moving pneumatic wheel load Stainless Steel Grade 304/316* Type SSM

removable crossmember

cover junction spacer section

steel support beam removable crossmember

through removablecrossmember at junction

of covers


110 mm

pressed steelwallbox

loose plate on mortar bedding for correct level

85 m

mva

ries

acco

rdin

g to

spa

n

varie

s ac

cord

ing

to s

pan

3 mm stainless steelchannel section

Type AUM

Type AUM

Type SSM

Type SSM



Single Covers & Frames – Type SSH/PS

Loading

Medium Duty Up to 5 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).

Typical floor finishExternal grade paving slabs, including granite and concrete, up to 50mm thick.

Optionsn Stainless Steel (Type SSH/PS)


Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 900 x 900 for this loading group.

Specification…… in No. ………. X………… single recessed cover and frame, Type SSH/PS with 3 hour fire rating to BS476: Part 20: 1987*, Stainless Steel with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts*

stainless steel show edge aluminium frame carrier

stainless steel outer frame

fram

e de

pth:

105

mm

reco

mm

ende

d re

bate

: 115

mm



reinforcement

stainless steelsocket

3.5 mm nominal

double seals

75mm 3.5 mm nominal

structural concrete

frame anchor lug


frame width: 61.5 mm

�oor �nish (e.g. paving slabs)

Type SSH/PS


150 x 150300 x 300450 x 300600 x 300750 x 300450 x 450600 x 450750 x 450 600 x 600750 x 600900 x 600750 x 750900 x 750900 x 900

Type SSH/PS


Duct & Trench Covers & Frames – Type SSH/PS

Loading





Standard Sizes AvailableComplex layouts of duct or trench runs can be created- Sizes from 150 to a Max clear opening span of 900mm for this loading group.

SpecificationRecessed duct covers and frames, Type SSH/PS Stainless Steel with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts* as per drawing.

stainless steel show edge aluminium frame carrier

stainless steel outer frame fra

me

dept

h: 1

05 m

m

reco

mm

ende

d re

bate

: 115

mm

stainless steelcorner plate


reinforcement

stainlesssteel socket

3.5 mm nominal

double seals

75mm 3.5 mm nominal

structural concrete

frame anchor lug


frame width: 61.5 mm

�oor �nish (e.g. paving slabs)

Type SSH/PS Type SSH/PS

150 c.o. minimum spanremovable support beam


Multispan Covers & Frames – Type SSH/PS

1300

1450

1600

1750

1900

2000

2150

2300

2450

2600

2750

2900

3300

3150

3000

3450

3600

3750

3900

650

725

800

875

950

650

725

725

800

800

950

950

800

950

950

950

950

650

725

800

875

950

700

675

850

850

1000

850

1000

850

850

850

1000

1000

650

725

725

800

800

950

950

850

850

850

1000

1000

800

800 850 850 650

800 700 700 800

800

950

800

950

1300

1450

1600

1750

1900

2000

2150

2300

2450

2600

3000

2850

2700

3150

3300

3450

3600

3750

3900

Pit clear opening length (L) mm

Beam centres mm

Pit

clea

r op

enin

g sp

an (S

) mm

4 p

arts

3 b

eam

s3

par

ts 2

bea

ms

2 p

arts

1 b

eam

2 parts 3 parts 4 parts

A B C D E

2750

2900







L = Pit clear opening length S = Pit clear opening spanCover BeamInset lines denote pit opening

L

A

SB

L

A

SB

L

A

SB

L

A

S B

C

L

A

S B

C

L

A

C

S B

L

A

SB

C

D

L

A

SB

C

D

L

A

C

D

SB

4300

4150

4000

4450

4600

4750

4900

800

850

950

950

1000

1000

1000

1000

850

1000

850

1000

1000

800 850 1000 850

800 850 850 850

800 850 700 850

1000

1000

1000

800

800

800

800

850

950

950

5 p

arts

4 b

eam

s




L

A

S

B

C

D

L

A

S

B

C

D

L

A

C

D

E E E

S

B




Loading


Then select product Type from opposite page.

Refer to the table to identify which cover and beam configuration you require against pit clear opening length (L) and pit clear opening span (S). All dimensions are in millimetres.

Note: For other pit clear opening sizes please refer to our technical department.


A B

Section BB

Section AA

B

A

3 mm stainless steelchannel section


115

mm

110 mm

removablecrossmember removable crossmember

steel support beam

cover junction spacer section

varie

s ac

cord

ing

to s

pan

varie

s ac

cord

ing

to s

pan

loose plate on mortar bedding for correct level

pressedsteel wallbox

through removablecrossmember at junction

of covers

Gatic Parade 2 hour fire rated Multispan Stainless Steel Recessed Covers and Frames with Removable Beams, galvanised baseplate and reinforcement, double sealed with socket head securing bolts/unsealed with blanking bolts* to suit a pit clear opening of …… x …… suitable for Medium Duty – 5 tonne slow moving pneumatic wheel load Stainless Steel Grade 304/316* Type SSH/PS.

Type SSH/PS

Type SSH/PS

Loading






Single Assist Lift Covers & Frames – Type AUH/ALIFT and SSH/ALIFT

Loading



Optionsn Aluminium (Type AUH/ALIFT) n Stainless Steel (Type SSH/ALIFT)

Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 1000 x 1000mm for this loading group.

Specification…… in No. ………. X………… single recessed cover and frame, Type AUH/ALIFT or SSH/ALIFT*,with 3 hour fire rating to BS476: Part 20: 1987*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, hatch to be fitted with concealed hinges and gas springs double sealed with securing bolts – unsealed with blanking bolts*

structural concrete in�ll

reinforcementaluminium show edge

�oor �nishstructuralconcrete

assisted lift spring

concrete �xing73 mm

75 m

m

130 mm 60 mm

frameanchor lug

stainless steel show

edge�oor �nish

(e.g. ceramic tiles)

structural concrete in�ll

reinforcement

cover lifting pointto accept threaded

lifting key

stainless steelcover frame

allowable coveropening angle = 90∞

double sealed

cover basesocket head securing bolt


3.5 mm nominal

frame width: 70 mm

assisted lift springincorporating safetystay upon opening

fully adjustable spring bracketto provide framework support

framework screwed to aperture wall


reco

mm

ende

d re

bate

: 90

mm

118 mm

fram

e de

pth:

75

mm

fully concealedhinge mechanism

Type AUH/ALIFT

Type SSH/ALIFT

Type AUH/ALIFT

Type SSH/ALIFT


600 x 600750 x 600750 x 750900 x 750900 x 900900 x 10001000 x 1000


Documents

Parade - Alumasc Water Management Solutions · Gatic Parade floor access covers provide easy access to under floor services using lifting keys to remove the cover. Cover sections