FIREPLACE INSERTS FROM BRUNNER

Panorama-Kamin42/42/42/42lifting door (easy-lift) State: 2018-02-01

Dimension sheets - Panorama-Kamin 42/42/42/42 lifting door (easy-lift)

State: 2018-02-01

… with fire table

Dimension sheets - Panorama-Kamin 42/42/42/42 lifting door (easy-lift)

State: 2018-02-01

… with fire table mounting frame

We suggest for CAD planing Palette CAD. Permanent updated drawings: www.brunner.deFrames / front versions are marked colored.

Planning and installation - Panorama-Kamin 42/42/42/42 lifting door (easy-lift)

Ulrich Brunner GmbHZellhuber Ring 17 - 18D-84307 EggenfeldernTelefonat: +49 / (0)87 21 / 7 71-0Telefax: +49 / (0)87 21 / 7 71-100info@brunner.de | www.brunner.de

BRUNNER Produkte werden ausschließlich vom qualifizierten Fachbetrieb angeboten und verkauft.Technische und Sortiments-Änderungen sowie Irrtum vorbehalten. State: 2018-02-01

Tested according to EN 13229 WValues measured at Rated capacitySuitable for all construction types according to rules OKEEI 107

Data for functional demonstrationRated heat power kW 8Fire wood volume kg/h 2.5Combustion performance kW 10Flue gas mass flow g/s 7Flue gas temperature after:

attached steel smoke hood °C 200Necessary supply pressure Pa 12Combustion air consumption m3/h 22Efficiency % 81Combustion air connection Ø mm 125

Heat distributionInsert / heat accumulator % 50 / -Glass pane (single / double) % 50 / -

Cross-section of gratings 1)

Supply air cm2 500 / 0 / 0Warm air cm2 500 / 0 / 0

Minimal oven surface for closed construction typeHeat dissipating surface m2 4

Minimal distances of the fireplaceto insulation layer cm 6to mounting floor cm 6

Thermal insulation without / with air gratings 2)

Mounting wall cm 6 / 4Floor cm 0Ceiling cm 19 / 14Brick lining for combustible wall cm 10

WeightFireplace / combustion chamber kg 148 / 25

Meets requirement/limit values for:Germany/ Austria / Suisse / Norway 1.BImSchV (Stufe 2) / 15a

BVG (2015) / LRV / NS 3059

1) for fireplace inserts / flue gas pipe / metallic reheating surface2) Values determined with upper air sections; stove cladding is heat emitting.