2
(+34) 976 365 811 www.ecomesh.es [email protected] by Made in UE © EndeF Engineering S.L. All rights reserved. Data included in the current doc- ument is subject to change without notice. HYBRID SOLAR PANEL Developed and manufac- tured in Spain TIC technology Reduction of 40% in the aperture area against Photovoltaic + Thermal Up to 15% of efficiency improvement versus a conventional PV panel Improvement of collector efficiency at high Tª Certification tests according to EN-12975 Durability and reliability tests according to ISO 9806:2013

Panel Solar Hibrido Ecomesh - Endef

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

(+34) 976 365 [email protected]

by

Made in UE

© EndeF Engineering S.L. A l l r i g h t s r e s e r v e d . Data included in the current doc-ument is subject to change without notice.

HYBRID SOLAR PANEL

Developed and manufac-tured in Spain

TIC technology

Reduction of 40% in the aperture area against Photovoltaic + Thermal

Up to 15% of efficiency improvement versus a conventional PV panel

Improvement of collector efficiency at high Tª

Certification tests according to EN-12975

Durability and reliability tests according to ISO 9806:2013

General features

Cell size

Cell numberFront glassWeight (empty)Dimensions (LxWxT)Junction boxCable lengthCable sectionDiodes numberConnectorsFrame

156x156mm603.2mm tempered glass45.8 kg1645 x 978 x 93(+25)mmIP65 / IP67 available1000mm4mm2

3MC4 compatibleAluminium

Electric specifications

Nominal Power (Pmax)Nominal Voltage (Vmp)Nominal Current (Imp)Open circuit voltage (Voc)Short circuit current (Isc)Output ToleranceModule Efficiency

255 Wp31.65 V8.06 A38.58 V9.06 A0 + 4.99 Wp15.98%

Values tested under Standard Conditions STC (AM 1.5, Irradiance 1000 W/m2, Cell temperature 25ºC)

-0.37%/K+0.06%/K-0.47%/K

DC 1000V (TUV)-40ºC / +85ºC15AIP65II

Maximum system voltageWorking temperatureMaximum reverse currentProtection degree IPSafety class

Incidental Irrad. = 1000 W/m2

Incidental Irrad. = 800 W/m2

Incidental Irrad. = 600 W/m2

Incidental Irrad. = 400 W/m2

Incidental Irrad. = 200 W/m2

Cu

rre

nt [

A]

Voltage [V]

00 5 10 15 20 25 30 35 40

2

4

6

8

10

I-V Curve according to incidental irradiance

I-V Curve according to temperature

Cu

rre

nt [

A]

Voltage [V]

Incidental Irrad. = 1000 W/m2

Cell Temp. = 10ºCCell Temp. = 25ºCCell Temp. = 40ºCCell Temp. = 55ºCCell Temp. = 70ºC

00 5 10 15 20 25 30 35 40

2

4

6

8

10

Thermal specifications

Maximum pressureAbsorberFluid VolumeOptical performance (ηo)Heat loss coefficient, a1Heat loss coefficient, a2Pressure loss

10 barCopper1,2 L0.514.93 W/m2k0.021 W/m2k2

0.04 bar

Thermal efficiency

1,00

0,80

0,60

0,40

0,20

0,000 0,01 0,02 0,03 0,04 0,05 0,06 0,07

Without electrical prod.With electrical prod.

G*=(Tm-Tair)/G

Voltage temp. coeficient Current temp. coeficient Power temp. coeficient

Ecomesh panels are distinguised by the incor-poration of the TIC technology, which improves the global efficiency of the panel by recovering the heat lost through the frontal face. This technology has been validated, patented, tested and installed by EndeF Engineering.

Made in UE

© EndeF Engineering S.L. A l l r i g h t s r e s e r v e d . Data included in the current docu-ment is subject to change with-out notice.

(+34) 976 365 [email protected]

Cell Temp.= 25ºC