Upload
others
View
38
Download
1
Embed Size (px)
Citation preview
Configuration Guide for Panasonic KX-NS1000
1 | P a g e XO Communications Confidential
Panasonic KX-NS1000 V.4.2 Configuration Guide
Configuration Guide for Panasonic KX-NS1000
2 | P a g e XO Communications Confidential
Table of Contents 1 Introduction .................................................................................................... 3 2 Executive Summary ....................................................................................... 4
3 Software and Hardware Equipment Requirements for Testing ...................... 5 4 Test Configurations ........................................................................................ 6 4.1 Lab Configuration 6 5 Panasonic Configuration ................................................................................ 7
Configuration Guide for Panasonic KX-NS1000
3 | P a g e XO Communications Confidential
1 Introduction
This document contains the test results of the SIP Trunking used to certify Panasonic IP PBX. This test verified the basic interoperability, features of the appliance, and the integration of the architecture framework. This certification test plan is to be executed in XO’s Plano Certification Laboratory (Plano Lab) which is equipped with different test equipments and is capable to simulate XO’s VoIP network environment.
Configuration Guide for Panasonic KX-NS1000
4 | P a g e XO Communications Confidential
2 Executive Summary
This report provides the test results found to date for the Panasonic IP PBX SIP Trunking evaluation. The following is a summary addressed the issues and limitation found while performing the test.
“Diversion” header is not working properly so that the Call Forward originated from PSTN and forwarded back to another PSTN number, the 3rd party can only see the 2nd party calling ID instead of the 1st party.
Call Transfer with or without REFER works fine. But the Blind Call Transfer with REFER works but has to use a specific dialing : When the 1st party is talking to the 2nd party, the 2nd party must do the following to make Blind Transfer working - <press Transfer Key>, <press *61 when hearing dial tone>, <press a PSTN number>, <press #>.
Due to no analog port in the machine under test, fax and analog calls are not tested.
Registration Method
Static registration is utilized between the Panasonic IP phones and the XO call agent.
XO SIP Service Packages Supported
Pkg Codec DTMF Fax
1 G.711 RFC 2833 / in-band DTMF T.38 / G.711 pass-through
2 G.729a/G.711 RFC 2833 / in-band DTMF T.38 / G.711 pass-through
Configuration Guide for Panasonic KX-NS1000
5 | P a g e XO Communications Confidential
3 Software and Hardware Equipment Requirements for Testing
1. Panasonic KX-NS1000 Software version : 4.2
2. 2 Panasonic IP Phones
Model no.: KX-NT 551, KX-NT 556
Configuration Guide for Panasonic KX-NS1000
6 | P a g e XO Communications Confidential
4 Test Configurations
4.1 Lab Configuration
The following diagram is the configuration used during lab testing.
4693873331
IP Phone – 192.168.0.20
Panasonic
Signal
192.168.0.101
IAD FE 0/1205.158.163.82
255.255.255.248
XO Network
4693873330
IP phone 192.168.0.10
XO Lab Setup for
Panasonic IPPBx Testing
Media
192.168.0.102
192.168.0.199
207.155.151.90
Note: Above lab setup only shows main lab network elements. Above setup shows NAT configuration is required on XO router (IAD) when IPPBX and IP phones have private IPs.
For detail, please refer to the attachment of IAD configuration.
Configuration Guide for Panasonic KX-NS1000
7 | P a g e XO Communications Confidential
5 Panasonic Configuration
Main screen
Configuration Guide for Panasonic KX-NS1000
8 | P a g e XO Communications Confidential
Virtual slot
Configuration Guide for Panasonic KX-NS1000
9 | P a g e XO Communications Confidential
Virtual Port - (Virtual SIP Gateway – Shelf Property)
*Make sure SIP Client port number should be 5060.
Configuration Guide for Panasonic KX-NS1000
10 | P a g e XO Communications Confidential
IP Address for Signaling IP Address of IPPBX - (NAT) internal: 192.168.0.101, external: 207.155.151.90 IP Address for Media IP Address of IPPBX – 192.168.0.102 Default Gateway -> IP Address of XO Router (IAD) – 192.168.0.1
Configuration Guide for Panasonic KX-NS1000
11 | P a g e XO Communications Confidential
VOIP port setting – Main IP Address -> XO NBS IP Address
Configuration Guide for Panasonic KX-NS1000
12 | P a g e XO Communications Confidential
VOIP port setting - Account
Configuration Guide for Panasonic KX-NS1000
13 | P a g e XO Communications Confidential
VOIP port setting – Registration (Disable – due to static SIP)
Configuration Guide for Panasonic KX-NS1000
14 | P a g e XO Communications Confidential
VOIP port setting - Option
Configuration Guide for Panasonic KX-NS1000
15 | P a g e XO Communications Confidential
VOIP port setting - Calling party
Configuration Guide for Panasonic KX-NS1000
16 | P a g e XO Communications Confidential
VOIP port setting - RTP/RTCP (DSCP bit configuration)
Configuration Guide for Panasonic KX-NS1000
17 | P a g e XO Communications Confidential
VOIP port setting - Codec settings:
Configuration Guide for Panasonic KX-NS1000
18 | P a g e XO Communications Confidential
VOIP port setting - Codec settings (continue): (shows Fax / DTMF configuration)
Configuration Guide for Panasonic KX-NS1000
19 | P a g e XO Communications Confidential
VOIP port setting - “Supplementary Service” – CNIP (receive) – ‘Yes’ to display inbound CNAM; Blind/Attended Transfer (REFER) is enabled.
Configuration Guide for Panasonic KX-NS1000
20 | P a g e XO Communications Confidential
Trunk settings:
Configuration Guide for Panasonic KX-NS1000
21 | P a g e XO Communications Confidential
COS settings for trunk:
Configuration Guide for Panasonic KX-NS1000
22 | P a g e XO Communications Confidential
DID settings:
Configuration Guide for Panasonic KX-NS1000
23 | P a g e XO Communications Confidential
Group priority setting
Configuration Guide for Panasonic KX-NS1000
24 | P a g e XO Communications Confidential
Numbering plan
Incoming call distribution group (Hunt group)
Configuration Guide for Panasonic KX-NS1000
25 | P a g e XO Communications Confidential
Normal “Hunt Group”
“Extension No Answer Redirection Timer” to find next member
Configuration Guide for Panasonic KX-NS1000
26 | P a g e XO Communications Confidential
“Overflow No Answer”
Configuration Guide for Panasonic KX-NS1000
27 | P a g e XO Communications Confidential
Extension settings:
Configuration Guide for Panasonic KX-NS1000
28 | P a g e XO Communications Confidential
Call forward settings done from extension: (below screen shot was for call forward always to 9725786857)
Intercept (to VM)
Configuration Guide for Panasonic KX-NS1000
29 | P a g e XO Communications Confidential
Intercept time (‘0’ indicates ‘default system time’ = 10 sec for lab)
Voice Mail
Configuration Guide for Panasonic KX-NS1000
30 | P a g e XO Communications Confidential
CLIP
Configuration Guide for Panasonic KX-NS1000
31 | P a g e XO Communications Confidential
Auto Attendant
Panasonic Software Version under test :