Panasonic Electric Works Europe AG Hotz Slide 1 Overview Screen creation software designed for the GT series

Panasonic Electric Works Europe AG HotzSlide 1

Overview

Screen creation software designed for the GT series


Current Version

Current Version: GTWIN 2.93 (Multi Language Version!)


Create a new Project

Create a new project.

Select GT and PLC Model.



Double-click to open a base screen.



Now the system is ready for programming!


Parts and Their Functions



Drag and drop some parts onto the base screen.

Switch

Lamp

Data Keyboard

Function Switch

Bar Graph



Double-click the switch part that has been placed on the base screen to set its attributes.

What appears on the tabs may differ depending on the part and which GT model you have selected.



If you want to allow the user to input values for devices such as a PLC with a data part, the data part must be used in

conjunction with a keyboard part or a keyboard screen.


GT Configuration

Via File Configuration, you can configure:

• GTWIN

• the GT unit

Make sure that your PLC does not use the word or bit areas, i.e. addresses assigned under "Basic Communication Area to PLC", for any other purpose!


GT Configuration

Set the communication parameters


Transfer

Once your PC and the GT unit are connected and communication is working, you can transfer data from GTWIN GT or from GT GTWIN. What appears in the "Transfer Data" dialog depends on

your GT unit.


Exercise

Exercise:

Place a lamp and a switch. The lamp should be on as long as the switch is pressed.

Place a data part that is controlled by a keyboard. Display the current value of the data part with a bar graph.


Thank youvery much

Documents

Panasonic Electric Works Europe AG Hotz Slide 1 Overview Screen creation software designed for the GT series