Upload
cindy-burrell
View
128
Download
0
Embed Size (px)
Citation preview
PALMETTO
Wood Products
About Palmetto
Distributorship located in Columbia, South Carolina
Over 3 decades of manufacturing sustainable wood products. We live the
“green” philosophy.
Over 100,000 SF of manufacturing and storage space: sawmill, dry kilns,
production and warehouse facilities
Maintain 2-3 million board feet of unfinished lumber for processing (on
site)
Vertically Integrated; “from forest to final inspection”
JIT manufacturer; minimal finished goods inventory
Serving the Storage, Utility, Educational, Hospitality, Retail,
Commercial, Municipal and OEM Markets: Bed Bath, TJX, IKEA, Ocean
Spray and many others
Custom Boxes and Crates
Palmetto is one of the few remaining
domestic distributors of wooden boxes
Max dimensions: 48”x 24” x 20”
Single color logo capability, max 18”x 12”
Stapled or nail pine
Custom Edge-Glued Panels
Eastern White Pine: up to 28”wide and 72”long (3/4”)
Minimum order requirements
Shelving SystemsSteel/Wood Stockroom and Backroom Shelving
Purpose built for retail market but used everywhere since 1982.
Wood & Steel Stockroom
Wood/Steel Stockroom
Key Selling Features
Cost effective
Simple, easy installation; no clips, bolts,
rails, pins posts….just 3 components-shelf,
upright, x-brace
Upright design allows for “sharing” in a
shelving run
Easily adjustable and reconfigurable shelving;
2” OC
Offered in a wide range of sizes
Construction and Components
Uprights – Preassembled, all rust proof, corrosion
resistant, galvanized steel construction. Strong,
continuously roll-formed posts with spreaders that are
swedge-locked in place; no welds to break. Engagement
tabs are 2” OC.
Available 9, 12, 15, 18, 22, 24 inch deep (28 special
order)
Heights: 3-14 feet (special heights are available in 6”
increments and)
Components Wood Stockroom Shelf
Construction and Components
Wood Shelves – ¾” edge-glued Eastern white pine
with crimped on galvanized steel end channels;
notched to engage upright tabs. Lesser grade vis-à-
vis all wood system shelving. Smooth sanded
surface but unfinished.
Sizes: 9,12,15,18,22,24 inch deep (28 inch special order).
24,36,42,48 inch wide
Can be treated with fire-retardant paint ($.40/SF upcharge)
Considered light/medium duty shelf; see deflection chart….the
wider the shelf, the more it will deflect.
Components Galvanized steel shelf
Components
Perforated Steel Shelf
Construction and Components
Steel shelf – Rust proof, corrosion resistant galvanized
steel. Shelf is hemmed front and back and reinforced
with hat section for strength. Fully assembled using
toggle-lock construction (patented process); no welds
to break.
Sizes: 9,12,15,18,22,24 inch deep (no 28”) and
24,36,42,48 inch wide
Load capacity similar to wood shelf…see chart.
Shelf can be perforated to meet specific fire codes;
net upcharge $3.50/shelf, 3 week lead time.
Other Components
X-Bracing: Used for lateral stability. Galvanized
steel construction. (Refer to Install Instructions)
Every free-standing unit gets 1 XB if the unit is
under 10 ft. high and 2 XB if 10 ft. and above.
X-Brace every other section of shelving in a
run; same rules apply as above.
Back-to-back shelving sections can share x-
braces
Use XB with “S” designation if the unit is 3’or
4’ high
Other Components Hang rod assembly: Used for hanging
merchandise or product. Consists of two
galvanized steel end brackets and either one or
two, 1” diameter plated steel pipes. Available
for 18, 22, or 24 inch units.
Other Components
Back-to-back Clip: Used for additional stability on back-to-
back free-standing or mobile shelving units.
Use one near top and one near bottom of
the joining uprights. (see install sheet)
Floor Bracket: Galvanized steel “L” bracket, generally
used to anchor uprights on a seismic application.
Does not include 3/8 x 3 anchors
Can also be used on any free-standing
unit to anchor to the floor
One bracket required per post
Other Components
Metal Kickplate: Galvanized steel 5”high x
24, 36, 42 or 48 inches long. Keeps debris
and/or product from collecting below
bottom shelf.
Attaches with 2 TEK screws through pre-
drilled holes in uprights.
Shelving Systems
Solid Wood Display & Storage Shelving
For diverse use in retail for merchandise display, commercial
and consumer storage applications
All Wood Shelving System
All Wood Shelving System
Key Selling Features versus Steel
Palmetto wood shelving can be cut/modified to take
full advantage of wall-to-wall space; efficient use of
available storage space!
Wood is a sustainable, renewable product that
requires far less energy to produce than steel
Wood is a natural insulator that helps to protect
stored items from heat and moisture, and dampens
sound transmittal.
Rust and corrosion resistant material
Shelving is adjustable on 1” increments and easy to
assemble and reconfigure
Aesthetics, “only wood is wood”
Stronger Design vs. Aluminum Channel
Key Features Palmetto (steel) shelf end design and
machined wood ends adhere to the original
Lundia design currently sold and
manufactured throughout the world. Check
shelf thickness = .730”vs .688” competitor
Palmetto is the exclusive distributor
Freight advantage East Coast versus West
Coast
Shelf Detail
3/4” THICK PINE SHELF
SHELF CHANNEL
SHELF CHANNEL
SHELF ASSEMBLY
UPRIGHTPOST
SHELFPIN
.735
.600
.520
.530
.688
TYPICAL SHELF TO POST CONNECTION
SHELF BRACKET
SHELF CHANNELMAT’L: .037 STEEL
SHELF MACHINING DETAILMAT’L: 3/4” EDGE-GLUED PINE
SHELF CHANNELASSEMBLY DETAIL
SHELF ASSEMBLY
Construction and Components
Shelves: ¾ inch edge-glued, display grade Eastern
white pine. Shelf end channels are powder coated,
roll formed steel for strength and durability.
Shelving
Available unfinished, clear finished
or in a tinted white wash finish. All
shelving is sanded smooth and
finished in a nontoxic, FDA
approved UV topcoat.
Sizes: 9,12,15,18,22,24 inch depths
(28” special order) and 24,36,42,48
widths.
Solid Wood Uprights
Constructed of furniture grade Western
hemlock; strong and resistant to twisting
and warping.
Posts/Stiles measure 1 5/16” x 1 1/2” and
are drilled with 3/16” holes, 1” OC. A 3/8”
x 5/8” plow runs the full length to accept
shelves. Horizontal spreaders (3-4) are
mortised, glued and nailed to provide a
rigid structure.
All components are sanded smooth and all
edges are eased.
Solid Wood Uprights Depth: 9/12/15/18/22/24 (28 special)
Height: 3-10’ in one foot increments (custom
heights available priced at next highest size)
Pins: Rustproof alloy, 3/16 x 1 1/4, 5/16 head
Lateral Support Components
X-Brace – Galvanized steel (same as
Stockroom shelving XB), generally used
on storage applications.
FSKIT – Free-standing kit Is constructed of
(2) hemlock headboards and (2)
footboards attached to the uprights with
connector hardware at predrilled
locations. Provides lateral strength,
enhanced aesthetics and pass through
display/storage.
FSKIT
Free-Standing Kit takes the place
of an x-brace. When ordering,
specify that uprights be drilled to
accommodate and FSKIT.
Top rails are 1 1/2 inches high,
bottom rails are 3” high. Provides
a “finished” appearance.
Hang Rod Components
Hang rod components are ordered
separately; requires (2) supports
and (1-2) pipes. Available
12,15,18,22 or 24” deep. Spruce
construction.
Kickboard
Eastern white pine 3 3/8 x 24,36,42,48 inches; ends are
slotted for mounting.
Additional Components
Mounting Pins: additional pins are sold by
the pound (80/lb.) WPIN@ $8.51 net
Floor Bracket
Back-to-back clip for wood uprights
End and Back Panels
End Panels and back panels are quoted on demand as a custom product.
All Dressed Up Custom Options
FIELD CUSTOMIZED FOR RETAIL
APPLICATIONS
GROCERY STORE APPLICATION
RETAIL DISPLAY
WINE APPLICATION