7/24/2019 Paints and Varnishes - General Tests Methods - Vol 1.2 - Index

1/61021

Contents

Vol. 1 Part 2

ISO 8130-1:1992 Coating powders Part 1: Determination of particle

size distribution by sieving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

ISO 8130-2:1992 Coating powders Part 2: Determination of density

by gas comparison pyknometer (referee method). . . . . . . . 11

ISO 8130-3:1992 Coating powders Part 3: Determination of density

by liquid displacement pyknometer. . . . . . . . . . . . . . . . . . . . . . . 19

ISO 8130-4:1992 Coating powders Part 4: Calculation of lower

explosion limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ISO 8130-4:1992 Coating powders Part 4: Calculation of lower

/Cor 1:1993 explosion limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ISO 8130-5:1992 Coating powders Part 5: Determination of flow

properties of a powder/air mixture . . . . . . . . . . . . . . . . . . . . . . . . 37ISO 8130-6:1992 Coating powders Part 6: Determination of gel

time of thermosetting coating powders at a given

temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

ISO 8130-6:1992 Coating powders Part 6: Determination of gel

/Amd 1:1998 time of thermosetting coating powders at a given

temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

ISO 8130-7:1992 Coating powders Part 7: Determination of loss

of mass on stoving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

ISO 8130-8:1994 Coating powders Part 8: Assessment of the

storage stability of thermosetting powders . . . . . . . . . . . . . . . 69

ISO 8130-9:1992 Coating powders Part 9: Sampling . . . . . . . . . . . . . . . . . . . . . 81

ISO 8130-10:1998 Coating powders Part 10: Determination of

deposition efficiency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

ISO 8130-11:1997 Coating powders Part 11: Inclined-plane flow test. . . . . 101

ISO 8130-12:1998 Coating powders Part 12: Determination of

compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

ISO 8130-13:2001 Coating powders Part 13: Particle size analysisby laser diffraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

7/24/2019 Paints and Varnishes - General Tests Methods - Vol 1.2 - Index

2/61022

ISO 8130-14:2004 Coating powders Part 14: Terminology. . . . . . . . . . . . . . . . . 131

ISO 9038:2002 Test for sustained combustibility of liquids. . . . . . . . . . . . . . . . 141

ISO 9117-1:2009 Paints and varnishes Drying tests Determination

of through-dry state and through-dry time. . . . . . . . . . . . . . . . 159

ISO 9117-2:2010 Paints and varnishes Drying tests Part 2:Pressure test for stackability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

ISO 9117-3:2010 Paints and varnishes Drying tests Part 3:

Surface-drying test using ballotini. . . . . . . . . . . . . . . . . . . . . . . . . 181

ISO 9117-4:2012 Paints and varnishes Drying tests Part 4:

Test using a mechanical recorder . . . . . . . . . . . . . . . . . . . . . . . . . 191

ISO 9117-5:2012 Paints and varnishes Drying tests Part 5:

Modified Bandow-Wolff test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

ISO 9117-6:2012 Paints and varnishes Drying tests Part 6:

Print-free test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

ISO 9227:2012 Corrosion tests in artificial atmospheres

Salt spray tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

ISO 9514:2005 Paints and varnishes Determination of the

pot life of multicomponent coating systems

Preparation and conditioning of samples and

guidelines for testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

ISO 10890:2010 Paints and varnishes Modelling of biocide

release rate from antifouling paints bymass-balance calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263

ISO 11341:2004 Paints and varnishes Artificial weathering

and exposure to artificial radiation Exposure to

filtered xenon-arc radiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277

ISO 11503:1995 Paints and varnishes Determination of resistance

to humidity (intermittent condensation) . . . . . . . . . . . . . . . . . . . 301

ISO 11507:2007 Paints and varnishes Exposure of coatings to

artificial weathering Exposure to fluorescent

UV lamps and water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313

ISO 11997-1:2005 Paints and varnishes Determination of resistance

to cyclic corrosion conditions Part 1:

Wet (salt fog)/dry/humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

ISO 11997-2:2000 Paints and varnishes Determination of resistance

to cyclic corrosion conditions Part 2:

Wet (salt fog)/dry/humidity/UV light . . . . . . . . . . . . . . . . . . . . . . . 351

ISO 11998:2006 Paints and varnishes Determination of

wet-scrub resistance and cleanability of coatings. . . . . . . . 363

7/24/2019 Paints and Varnishes - General Tests Methods - Vol 1.2 - Index

3/61023

ISO 12137:2011 Paints and varnishes Determination of

mar resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381

ISO 13076:2012 Paints and varnishes Lighting and procedure

for visual assessments of coatings. . . . . . . . . . . . . . . . . . . . . . . . 393

ISO 13736:2008 Determination of flash point Abel closed-cupmethod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403

ISO 13803:2000 Paints and varnishes Determination of reflection

haze on paint films at 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431

ISO 14680-1:2000 Paints and varnishes Determination of pigment

content Part 1: Centrifuge method. . . . . . . . . . . . . . . . . . . . . . 445

ISO 14680-2:2000 Paints and varnishes Determination of pigment

content Part 2: Ashing method. . . . . . . . . . . . . . . . . . . . . . . . . . 455

ISO 14680-3:2000 Paints and varnishes Determination of pigment

content Part 3: Filtration method. . . . . . . . . . . . . . . . . . . . . . . . 463

ISO 15181-1:2007 Paints and varnishes Determination of release rate

of biocides from antifouling paints Part 1: General

method for extraction of biocides. . . . . . . . . . . . . . . . . . . . . . . . . 473

ISO 15181-2:2007 Paints and varnishes Determination of release rate

of biocides from antifouling paints Part 2:

Determination of copper-ion concentration in the

extract and calculation of the release rate. . . . . . . . . . . . . . . . . . 489

ISO 15181-3:2007 Paints and varnishes Determination of release rateof biocides from antifouling paints Part 3:

Calculation of the zinc ethylene-bis(dithiocarbamate)

(zineb) release rate by determination of the

concentration of ethylenethiourea in the extract. . . . . . . . . . 507

ISO 15181-4:2008 Paints and varnishes Determination of release

rate of biocides from antifouling paints Part 4:

Determination of pyridine-triphenylborane (PTPB)

concentration in the extract and calculation of the

release rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527

ISO 15181-5:2008 Paints and varnishes Determination of release

rate of biocides from antifouling paints

Part 5: Calculation of the tolylfluanid and

dichlofluanid release rate by determination of the

concentration of dimethyltolylsulfamide (DMST) and

dimethylphenylsulfamide (DMSA) in the extract. . . . . . . . . . . 547

7/24/2019 Paints and Varnishes - General Tests Methods - Vol 1.2 - Index

4/61024

ISO 15181-6:2012 Paints and varnishes Determination of release rate

of biocides from antifouling paints Part 6:

Determination of tralopyril release rate by quantitation

of its degradation product in the extract. . . . . . . . . . . . . . . . . . 571

ISO 15184:1998 Paints and varnishes Determination of filmhardness by pencil test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593

ISO 15528:2000 Paints, varnishes and raw materials for paints

and varnishes Sampling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603

ISO 15710:2002 Paints and varnishes Corrosion testing by

alternate immersion in and removal from a

buffered sodium chloride solution. . . . . . . . . . . . . . . . . . . . . . . . . 625

ISO 15711:2003 Paints and varnishes Determination of resistance

to cathodic disbonding of coatings exposed to

sea water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 639

ISO 15880:2000 Paints, varnishes and binders Determination

of MEQ value of water-based coating materials

and binders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 661

ISO 16053:2010 Paints and varnishes Coating materials and

coating systems for exterior wood Natural

weathering test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671

ISO 16773-1:2007 Paints and varnishes Electrochemical impedance

spectroscopy (EIS) on high-impedance coatedspecimens Part 1: Terms and definitions. . . . . . . . . . . . . . . . 697

ISO 16773-2:2007 Paints and varnishes Electrochemical impedance

spectroscopy (EIS) on high-impedance coated

specimens Part 2: Collection of data. . . . . . . . . . . . . . . . . . . . 709

ISO 16773-3:2009 Paints and varnishes Electrochemical impedance

spectroscopy (EIS) on high-impedance coated

specimens Processing and analysis of data

from dummy cells. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 731

ISO 16773-4:2009 Paints and varnishes Electrochemical impedance

spectroscopy (EIS) on high-impedance coated

specimens Part 4: Examples of spectra of

polymer-coated specimens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 745

ISO 16862:2003 Paints and varnishes Evaluation of sag resistance . . . . . 769

ISO 17132:2007 Paints and varnishes T-bend test . . . . . . . . . . . . . . . . . . . . . . . 785

ISO 17872:2007 Paints and varnishes Guidelines for the

introduction of scribe marks through coatings on

metallic panels for corrosion testing. . . . . . . . . . . . . . . . . . . . . . . 801

7/24/2019 Paints and Varnishes - General Tests Methods - Vol 1.2 - Index

5/61025

ISO 20566:2005 Paints and varnishes Determination of the scratch

resistance of a coating system using a laboratory

car-wash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819

ISO 20567-1:2005 Paints and varnishes Determination of stone-chip

resistance of coatings Part 1: Multi-impact testing. . . . . 835ISO 20567-2:2005 Paints and varnishes Determination of stone-chip

resistance of coatings Part 2: Single-impact test

with a guided impact body. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 853

ISO 21227-1:2003 Paints and varnishes Evaluation of defects on

coated surfaces using optical imaging Part 1:

General guidance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869

ISO 21227-2:2006 Paints and varnishes Evaluation of defects on

coated surfaces using optical imaging

Part 2: Evaluation procedure for multi-impact

stone-chipping test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 887

ISO 21227-3:2007 Paints and varnishes Evaluation of defects on

coated surfaces using optical imaging

Part 3: Evaluation of delamination and corrosion

around a scribe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 903

ISO 21227-4:2008 Paints and varnishes Evaluation of defects on

coated surfaces using optical imaging Part 4:

Evaluation of filiform corrosion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 919ISO 23811:2009 Paints and varnishes Determination of percentage

volume of non-volatile matter by measuring the

non-volatile matter content and the density of the

coating material, and calculation of the theoretical

spreading rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933

ISO 28199-1:2009 Paints and varnishes Evaluation of properties

of coating systems related to the application process

Part 1: Relevant vocabulary and preparation of

test panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953

ISO 28199-1:2009 Paints and varnishes Evaluation of properties of

/Cor 1:2009 coating systems related to the application process

Part 1: Relevant vocabulary and preparation of

test panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 979

ISO 28199-2:2009 Paints and varnishes Evaluation of properties

of coating systems related to the application

process Part 2: Colour stability, process hiding

power, re-dissolving, overspray absorption, wetting,surface texture and mottling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 981

7/24/2019 Paints and Varnishes - General Tests Methods - Vol 1.2 - Index

6/61026

ISO 28199-3:2009 Paints and varnishes Evaluation of properties of

coating systems related to the application process

Part 3: Visual assessment of sagging, formation of

bubbles, pinholing and hiding power. . . . . . . . . . . . . . . . . . . . . . 997

ISO/TR 29662:2009 Petroleum products and other liquids Guidancefor flash point testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1013