Painting Specification

PAINTING SPECIFICATION

CPI SEPARATOR FOR MGDP

February 20, 2015

Rev. 1

Document No.: MTDF-BBS-MR-0275-3320-A0106-1001 Page 1 of 4

MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1

Table of Contents

1. PAINT MATERIALS FOR CLIENT APPROVAL ............................................................... 2

Table 1.1. International Manufacturer ....................................................................................... 2

2. PLANT COLORS AND IDENTIFICATION ......................................................................... 2

Table 2.1. Colors For CPI Separator .......................................................................................... 3

Tabel 2.2. Colors For Safety Identification ................................................................................. 3

Annex B – System L1-SS Brand: International Paint ................................................................... 4



February 20, 2015

Rev. 1


MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1

1. PAINT MATERIALS FOR CLIENT APPROVAL

Materials specified or referenced by manufacturer’s name and/brand are intended to describe the

type and quality level of material desired and are not intended to be restrictive or to exclude similar

items by other manufacturer. Alternate material require approval from the ENGINEER before being

used. Any approval given by the ENGINEER for alternate materials and/or application methods is

subject to change if the performance of the alternate materials or application method is later found

to be inferior to the specified materials and methods.

Approval is limited to application over surfaces operating at and application conditions less severe

than the conditions stated in the published literature of the paint material manufacturer.

Equipment fabricator shall refer paint supplier product datasheet before applying painting.

Table 1.1. International Manufacturer

Type & Paint

Supplier

Inorganic

Zinc

Silicate

Epoxy

Zinc Rich

Epoxy

Mastic

Acrylic

Urethane

Phenolic

Epoxy

Silicone

Acrylic

Silicone

Alumunium

Epoxy MIO

Carboline

Carbo Zinc 11

Carbo Zinc 859

Carboguard 890

Carbothane 134 HG

Phenoline 1205

Thermaline 4900

Thermaline 4700

Supplier to provide detail to

contractor/ owner

Akzonobel/

International

Paint

Inter Zinc 22

Inter Zinc 52

Interseal 670 HS

Interthane 990

Interthane 228;

Interline 850

Intertherm 875

Intertherm 50


contractor/ owner

PPG Amercoat

Dimetcote 9 Series

Amercoat 68 HS

Amerlock 400/2

Amercoat 450 H Series

Amercoat 90 HS

Amercoat 874 HS

Amercoat 878


contractor/ owner

2. PLANT COLORS AND IDENTIFICATION

Painting colors on CPI Separator shall be as per Tabel 2.1.

Structure shall be color coded to warn personnel of potensial physical hazard for safety. Safety

identification color coding shall be in accordance with the Table 2.2.

Except for safety color coding and unless otherwise stated in following tables, the finish colors shall

be light ivory for equipment and structural stell.

1. External Coating for CPI Separator

Annex B – System L1-SS Brand:

International Paint



February 20, 2015

Rev. 1


MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1

Table 2.1. Colors For CPI Separator

Item Name Surface Preparation Priming Coat

Intermediate Coat

Top Coat Color

RAL No DFT

Micron

CPI SEPARATOR

Near White Metal Blast

Cleaning (SSPC SP 10)

High solid epoxy “Interseal 670 HS“

(DFT 125 µ) Thinner GTA 220

Mist Coat “Intethane 990”

(DFT 30 µ) Thinner GTA733

Aliphatic polyurethane

“Interthane 990” (DFT 50 µ)

Thinner GTA733

Light Gray RAL 7038 Min. 175 µ

Tabel 2.2. Colors For Safety Identification

This table describes the colors required for safety of Operators.

Safety Identification Colors

Item To Be Painted Color RAL Code

Dangerous obstructions Black/Yellow Lines sloped at 45° minimum 50% of surface yellow

RAL 9005/1021

Dangerous or exposed parts of machinery Alert Orange RAL 2003

Fire-Fighting equipment Fire Red RAL 3000

First aid equipment Dark Green RAL 6028

Rigging/Lifting items: Davits, Lifting beams, overhead traveling cranes and portal cranes

Static parts Yellow/Black Lines sloped at 45° minimum 50% of surface yellow

RAL 1021/9005

Moving parts Alert Orange RAL 2003

Top & Bottom of handrails for ladders and stairways, where indicated

Yellow RAL 1021

Platform Maintenance Deck Yellow RAL 1021

Road Marking White RAL 9010

Identification for “Stop” and “Danger”,e.g. flammable liquid containers, emergency stop switches, fire protection equipment and apparatus

Red RAL 3002

Identification for marking hazardous parts of machines which may cut, crush, or other wise injure

Alert Orange RAL 2003

Identification for “Safety” and location of “First Aid”, and “Safety Equipment

Dark Green, White lettering RAL 6028, RAL 9010



February 20, 2015

Rev. 1


MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1

Annex B – System L1-SS Brand: International Paint

Documents

Painting Specification