Pacific Coast Marine Windshields Brad Franklin Quote no 2689915
10/14/2021
Quote Quote number: 2689915
300 Technology Center Way Ste. 550 Rock Hill, SC 29730
Phone: +1 866-472-1013
Vonore TN 37885 United States
Phone: +1 423-371-9523 Email:
Revised from quote: 2682819
Dear Brad Franklin
Thank you for your recent enquiry. Further to our discussions,
please find enclosed our quotation as per your requirements.
We trust the enclosed information is of interest, and look forward
to hearing back with your comments. If you require any further
information on this or any of our products and services, please do
not hesitate to contact me.
Yours sincerely
Quote Quote number: 2689915
Total Price (USD)
8153635209 GA37P A 125 MEAF 460 60 GRAPH 1 17,645.00
17,645.00
Oil Injected Screw Compressor - Air Cooled -Capacity: 227.6 CFM @
125PSI -Motor: 50HP, NEMA Premium TEFC Motor - Voltage:
460V/3ph/60Hz -132 PSI Maximum Operating Pressure -Advanced
Microprocessor Control: Elektronikon Touch -Long Life RDX (Roto
Duty Extend) Synthetic Oil -Pack Unit: External air treatment
recommended -Footprint: 51.6"L x 35"W x 70.5"H
8102227798 FX110(E9)230/60-F-- 1 3,344.00 3,344.00
8102372012 DD110+ (NPT1 1/2) 1 445.00 445.00
1280566572 LV 500-165 1 3,352.50 3,352.50
1280548023 KIT:SRV-GAG 400-500GA 165PSI 1 120.00 120.00
8102044040 EWD 50 NPT 110V 1 185.00 185.00
OTMSERVNO PO
Grand Total (excl TAX AND SHIPPING) USD 25,591.50
Payment & delivery conditions
Payment terms: 30 days net
Incoterms & location: EXW - Rock Hill
Delivery Terms Equipment will be delivered in our standard
packaging unless otherwise stated (off-loading and positioning to
be done by others). Optional items may impact delivery. Delivery
time can be confirmed upon acceptance of your order/final
instructions to proceed.
Quote Quote number: 2689915
GA 37/45 PRODUCT DESCRIPTION ATLAS COPCO COMPRESSORS
Model: GA 37 & GA 45 Oil Injected Rotary Screw Air Compressor
THE ULTIMATE SMART SOLUTION, DRIVEN BY EFFICIENCY Atlas Copco’s
GA37/45 compressors bring you outstanding sustainability,
reliability and performance, while minimizing the total cost of
ownership. Built to perform even in the harshest environments,
these compressors keep your production running efficiently.
GA PREMIUM COMPRESSOR
• Premium quality at the lowest initial investment
• Elektronikon® Touch compressor controller with integrated
SMARTLink connectivity
PACK UNITS FEATURE:
• Heavy-duty, 4,000 hour, two-stage inlet filter, SAE fine
efficiency rating
• Inlet filter differential pressure indicator
• High efficiency and 100% maintenance-free gear-drive system
• High efficiency, EPAct compliant Nema Premium Efficiency TEFC
drive motor
• ASME coded air/oil separator tank
• High efficiency, three stage air/oil separation with 8,000 hour
separator element
• 8,000 hour, spin-on type oil filter
• Factory filled with synthetic oil
• CSA/UL approved control cubicle
• Full acoustical sound attenuating enclosure
• Designed for 115ºF maximum ambient operating temperature
• Air-cooled versions are equipped with: o Aluminum block
aftercooler with integrated moisture separator o Low noise radial
type cooling fan
• Water-cooled versions are equipped with: o Efficient brazed plate
heat exchangers o Moisture separator
AVAILABLE OPTIONS:
Date: 10/14/2021 6/28
• Mounted DD+ or UD+ filters (available on full feature units
only)
• Integrated master system controller (EQ4i or EQ6i)
• High ambient version (131ºF maximum)
• Power Duct Fan
ELEKTRONIKON® Mk5s TOUCH CONTROL MODULE:
The Mk5s ELEKTRONIKON TOUCH® control system provides energy
efficient load/no load control. The graphic based controller has a
4.3” HD color display and uses icons for touch and swipe
navigation. The unit can be programmed in a choice of 32 languages.
The Elektronikon™ controller has following functions: Controlling
the compressor, Protecting the compressor, Monitoring components
subject to service and Automatic restart after voltage failure
(ARAVF) to provide efficient operation of the compressor. Standard
features include SMARTLINK 3G connectivity, built-in phase sequence
relay. A partial description for the module's capabilities
include*:
Compressor Status indication Service Indicators
• Automatic operation • Air filter
• Voltage on • Oil filter
• General alarm/shutdown • Oil separator
• 1 Ethernet & 2 CAN connections Configuration Parameters
• Remote control and connectivity • Time
• 10 digital inputs • Date
• 5 temperature and 2 pressure analog inputs • Format of date
• 9 digital outputs • Multiple language display
• RS485 connection • Units for pressure
• IO expansion connection • Units for temperature
• Auto restart after power failure Available Data (factory
disabled)
• Element outlet temperature • Motor start mode
• Delivery air pressure • Extra digital input
• Running hours and hours to next service • Pressure band
• Loaded hours
• Dew point (full feature units only) Full Feature Only
• Outlet dew point
Quote Quote number: 2689915
Model: GA37 125 AP - 460V 50 hP C90
Inlet reference conditions
2. Ambient air temperature 68 °F
3. Relative humidity 0 %
Performance (1)
2. Free Air Delivery 227.6 cfm
3. Total Electrical Power at reference conditions 43.4 kW
4. Total Specific Energy Requirement 19.1 kW / 100 scfm
5. Total Electrical power input at unload 11.4 kW
6. Mean Sound pressure level with tolerance (2) 67 / 3 dB(A)
Limitations
3. Minimum effective working pressure 58 °F
4. Maximum effective working pressure 132 °F
5. Maximum altitude 3281 ft
Cooling data
2. Discharge air temperature (ambient + °F) 13 °F
Electrical Data
2. FLA 71.4 A
Design data
2. Motor Efficiency at Full Load (No Load) 93 (89.1) %
3. Typical oil content of compressed air < 3 ppm
4. Typical oil consumption at ref conditions 8.8 oz/100h
Physical data
1. Dimensions (L x W x H) 51.6 x 35 x 70.5 inches
2. Shipping Dimensions (L x W x H) 65 x 42.9 x 79.3 inches
3. Weight (Shipping) 1539 (1870) Lbs.
4. Air discharge size 1 1/2 in NPT
5. Condensate drain size (OD) 6 mm.
6. Oil sump capacity 4.7 gallons
1. Performance (free air delivery) measured according to ISO1217.
2. Operating Sound Level: Operating sound levels for machines
equipped with recommended standard motors and enclosures are
guaranteed ±3 dB(A) when measured in free field conditions at a
distance of 1 meter according to CAGI PNEUROP Test Code. 3. Maximum
altitude at which the data sheet performance remains valid. Above
this elevation there may be limitations on performance 4. Consult
factory for performance data if HAV option is included on
unit
Quote Quote number: 2689915
General Description
The FX range of refrigerant dryers offers a reliable, cost
effective and simple solution to those who need quality compressed
air for their manufacturing processes. To avoid condensation, and
therefore all chance of equipment and end-product corrosion and
damage, compressed air needs to be dry — exactly what FX dryers are
designed to do.
The FX dryer range is simple, yet robust and reliable. It is a
no-frills range that relies on proven technology, solid components
and uncomplicated design; these features combined deliver a
constant dew point and reliable performance at any flow — in almost
every manufacturing application.
Quote Quote number: 2689915
Working Principle
Refrigerant drying means that the compressed air is cooled, which
allows a large amount of the water condense and be separated. After
cooling and condensing, the compressed air is reheated to around
room temperature so that condensation does not form on the outside
of the pipe system. This heat exchange between ingoing and outgoing
compressed air, and as such reduces the required cooling capacity
of the refrigerant circuit.
Cooling takes place via closed refrigerant system. FX refrigerant
dryer, a freestanding machine that is used for dew points between
+4°C and +3°C.
Quote Quote number: 2689915
5. Condensed fan
Date: 10/14/2021 12/28
Scope of supply
Reliable Refrigerant Circuit
A closed circuit where the refrigerant flow is. Refrigerant
compressor brings gaseous refrigerant to high pressure and high
temperature. To ensure that only gaseous refrigerant only enters
the compressor, a refrigerant separator is installed before it. It
also includes the condenser that cools slightly the refrigerant,
thus changes the refrigerant from gas to liquid state. The
refrigerant’s pressure should be reduced, thus lowering its
temperature and increasing its cooling capacity. The capillary tube
does this, and to protect from harmful particles, a Capillary
filter is designed for the FX. Finally, to regulate the amount of
refrigerant passing through the air-refrigerant heat exchanger,
ensuring a stable pressure dew point, and eliminating the chance of
the condensate freezing.
Energy efficient Air Circuit
Hot saturated air enters the dryer and is cooled down by the
outgoing air via air-air heat exchanger. Reducing the temperature
of the inlet air reduces the load on the refrigerant circuit. The
air-refrigerant heat exchanger transfers the heat from compressed
air to the cold refrigerant, forcing water vapour in the compressed
air to condense. These condensates are separated in the water
separator, equipped with electronic drain. On the air outlet, the
cooled compressed air is reheated to prevent condensation into the
pipe works, and now equipped with a pressure dew point sensor
Quote Quote number: 2689915
• Air-air heat exchanger lowers the load in the refrigerant
circuit
• High efficiency refrigerant compressor
• Air-air heat exchanger, pre heats the cold compressed air
• Hot gas bypass, to prevent freezing at partial load
• Efficient water separator and automatic drain
• Pressure dew point sensor for an accurate pressure dew point
measurement
Easy connectivity
Potential free contact, to allow remote monitoring on customer’s
data control system
Quote Quote number: 2689915
Date: 10/14/2021 14/28
Filters UD+, DD+, DDp+, PD+, PDp+, QD+ ATLAS COPCO QUALITY AIR
SOLUTIONS
General Description
Untreated compressed air can be contaminated by dust, water, and
oil. In almost all applications,
contamination of the air supply can cause serious performance
decline and increase maintenance costs in terms of actual repairs
and lost productivity. Therefore, filtration is a crucial
component
of your air system. Atlas Copco has developed filtration solutions
that protect your air-powered tools,
your processes, and your final products. Our extensive offer
includes different filter types and a range of purity grades to
meet your specific requirements. We design filtration solutions to
provide compressed air
purity that meets or exceeds levels set forth by the International
Standard Organization. (ISO). Filters are
tested in accordance with these standards:
• ISO 8573-1: 2010 Filtration Qualification
• ISO 8573-2 sampling and measuring OCO
• ISO 12500-1: inlet conditions for Oil Aerosol
• ISO 12500-3: inlet conditions for Dust
Among its filter ranges, Atlas Copco offers more than 200 filters
that span from coalescing filters for
general purpose protection to active carbon filters used for
removal of oil vapor and hydrocarbon odors:
• UD+, a high-efficient coalescing filter type, combining DD+ and
PD+ in one. Its unique low density provides a 40% pressure drop
reduction. The maximum oil carry-over of this unique filter is
0,0009 mg/m³.
• DD+, a coalescing filter type, removes contaminants such as
liquid water, oil aerosol up to 0.1ppm and particle size down to 1
micron.
• PD+, a coalescing filter type, removes contaminants such as
liquid water, oil aerosol up to 0.01ppm and particle size down to
0.01 micron.
• DDp+ particulate filter type, dust protection, particle size down
to 1 micron.
• PDp+ particulate filter type, dust protection, particle size down
to 0.01 micron.
• QD+, activated carbon filter type, removes oil vapor, hydrocarbon
odor contaminants.
Regardless of your quality air and filtration needs, Atlas Copco
undoubtedly offers a filter that is perfect
for your application.
Working Principle
Particles in the air stream that pass through a filter can be
removed in several different ways. If the particles are larger than
the openings between the filter material, they are separated
mechanically
(“sieving”). This usually applies for the particles larger than
1mm. The filter efficiency in this regard
increases with the tighter filter material, consisting of fine
fibers. Particles smaller than 1mm are collected on the fiber
material by three physical mechanism:
1. inertial impaction 2. interception 3. diffusion
Impaction occurs for relatively large particles and for high gas
velocities. Due to a large inertia of a heavy particle, it does not
follow the streamlines but instead travels straight
ahead and collides with fiber. Interception occurs when a particle
does follow the streamline, but the
radius of the particle is larger than the distance between the
streamline and the fiber perimeter. Particle deposition due to
diffusion occurs when a very small particle does not follow the
streamlines but moves
randomly across the flow due to Brownian motion. It becomes
increasingly important with smaller
particle size and lower the velocity. Oil and water in aerosol form
behave like the other particles and can be separated using a
coalescing filter. In the filter, these liquid aerosols coalesce to
larger droplets that
sink to the bottom due to gravity.
Depending on the purpose of the filter, we have designed different
type of filter element:
1. Wrapped for wet particles: Wrapped media offer durability in wet
and oil contaminated environments. The patented Nautilus technology
combines multiple wrapped layers to ensure
constant air quality in the harshest conditions.
2. Pleated for solid particles: Pleated technology is the preferred
method to capture dry particulate in compressed air. Over time,
particles will clog the filter media. Pleated surfaces have a
larger surface area and therefore give you a longer filter service
lifetime as well as a lower pressure drop.
3. Macro-structured activated carbon: Macro-structured activated
carbon has a larger surface compared to the typical carbon dust
filter media. Thanks to its supreme adsorption capacity, it
delivers a steady performance over a longer period.
Quote Quote number: 2689915
2. InPASS bypass (only for inPASS filter range)
• Built-in by-pass system
4. Non-stick float drain
Features & Benefits
Energy Savings
• Considerable reduction of air turbulence and pressure drop
Reliable operation
• High-performance stainless-steel filter cores
• Internal ribs to protect the element from damage and route oil
droplets
• High performance automatic drain
• Ribbed housing for easy removal of the bowl during
maintenance
• Push on element
• Anti-re-entrainment barrier is color coded to easily indicate
filter grade
• Bypass for the inPASS range: internal bypass in the housing for
easy maintenance
Quote Quote number: 2689915
Condensate Drain
Atlas Copco’s EWD range is superior to timer operated drains in
several key ways. First, Atlas Copco’s EWDs have wide passage ways
and timer operated drains have narrow ones; narrow passage ways
increase the likelihood that the unit will become blocked, thereby
not allowing the unit to drain properly. Second, timer operated
drains are inferior in their design and often result in drains
becoming stuck open, which wastes air and decreases overall
efficiency. Lastly, timer controlled drains open at constant
intervals and each time they open, an average of 25cfm of
compressed air is wasted, which can become very expensive; Atlas
Copco’s EWDs wastes absolutely no compressed air.
Atlas Copco’s range of EWD electronically controlled condensate
drains is synonymous with safe, dependable and economical
condensate management.
The intelligent drain function monitors condensate build-up with
liquid level sensors and evacuates the condensate only when
necessary, thereby avoiding compressed air waste and providing for
considerable energy savings.
The EWD drain device offers security and confidence, enabling you
to solve all condensate discharge problems even in heavily
contaminated systems.
How is an EWD better than a timer
operated drain?
1. Condensate enters the drain and collects in the sump.
2. The diaphragm valve is closed due to the solenoid valve allowing
pressure compensation through the pilot supply line. The
pressurized space above the diaphragm is larger than that below it,
ensuring and absolutely leak-proof seal.
3. Once the condensate level reaches the upper limit the solenoid
valve is engaged, closing the pilot supply line. The pressure on
top of the diaphragm is allowed to escape and the diaphragm lifts
off the valve seat.
4. Then the pressurized condensate forces its way into the
discharge pipe.
5. As the condensate drains away, the level probe monitors the
speed at which the level drops, calculating exactly when to shut
the diaphragm so that no air escapes.
6. If a problem develops, such as a blocked outlet or faulty
diaphragm, the drain switches to “fault mode”. Both the flashing
alarm light and the volt free contact are activated and the drain
switches to a “timer” mode until the problem is resolved.
Quote Quote number: 2689915
Model: EWD 50 (A)
Limitations for operations EWD 50 (A) 1. Minimum working pressure
11.6 psi(g)
2. Maximum working pressure 232 psi(g)
3. Minimum allowable inlet temperature 34 °F
4. Maximum allowable inlet temperature 140 °F
5. Suitable for oil free condensate Yes
Reference conditions A
2. Ambient air temperature 104 °F
Performance data (1) (for reference conditions A)
1. Maximum compressor capacity
2. Maximum refrigeration dryer capacity 212 cfm
3. Maximum filter capacity 1059 cfm
Reference conditions B
2. Ambient air temperature 95 °F
Performance data (1) (for reference conditions B)
1. Maximum compressor capacity
2. Maximum refrigeration dryer capacity 275 cfm
3. Maximum filter capacity 1377 cfm
Design data 1. Dimension of compressed air connections: Inlet ½
G/NPT
Outlet ¼ G/NPT
Width 2.8 in
Height 4.5 in
Width 5.1 in
Height 3.5 in
6. Shipping weight 2.2 lb
(1) At reference conditions (2) Referred to an absolute pressure of
1 bar and 20°C (3) According to ISO 8573-2 in a typical
installation
Quote Quote number: 2689915
Atlas Copco – The Connected Efficiency Journey
Our promise to you is we do more. And together with you, we are
more! No other company offers more technologies to produce and
manage air, but we don’t try to be a total solutions provider and
we’re not a ‘one-stop-shop’. Instead, we innovate in the focused
areas where we are confident we can provide a complete solution
that has the lowest cost of ownership, maximizing efficiency and,
most importantly, offer a complete service package that is second
to none.
Quote Quote number: 2689915
Date: 10/14/2021 26/28
Standard Conditions of Sale GENERAL – Unless otherwise expressly
agreed in writing by a duly authorized representative of Atlas
Copco these terms and conditions supersede all other communications
and agreements and notwithstanding any conflicting or different
terms and conditions in any order or acceptance of Purchaser, all
sales and shipments shall exclusively be governed by these terms
and conditions. When used here in “affiliates” shall mean Atlas
Copco AB and its wholly-owned subsidiaries. Section headings are
for purposes of convenience only. “Products” as used herein shall
include products, parts and accessories furnished Purchaser by
Atlas Copco. Orders shall be subject to acceptance at Atlas Copco
Compressors LLC’s principal corporate offices in Rock Hill, South
Carolina.
DELIVERY – Unless otherwise agreed in writing, Products
manufactured, assembled or warehoused in the continental United
States are delivered F.O.B. shipping point, and Products shipped
from outside the continental United States are delivered F.O.B.
point of entry. Where the scheduled delivery of Products is delayed
by Purchaser or by reason of any of the contingencies referred to
in Section 5. Atlas Copco may deliver such Products by moving it to
storage for the account of and at the risk of Purchaser. Shipping
dates are approximate and are based upon prompt receipt of all
necessary information and approvals from Purchaser. Atlas Copco
reserves the right to make delivery installments.
SECURITY AND RISK OF LOSS - Upon request from Atlas Copco,
Purchaser agrees to execute a security agreement covering the
Products sold or other assets and to perform all acts which may be
necessary to perfect and assure a security position of Atlas Copco.
Notwithstanding any agreement with respect to delivery terms or
payment of transportation charges, the risk of loss or damage shall
pass to Purchaser and delivery shall be deemed to be complete upon
delivery to a private or common carrier or upon moving into
storage, whichever occurs first, at the point of shipment for
Products assembled, manufactured or warehoused in the continental
United States or at the point of entry for Products shipped from
outside the continental United States.
PAYMENT – If Purchaser fails to pay any invoice when due, Atlas
Copco may defer deliveries under this or any other contract with
Purchaser, except upon receipt of satisfactory security for or cash
in payment of any such invoice. A service charge of the lesser of
1% per month or the highest rate permitted by applicable law shall
be charged on all overdue accounts. Failure on the part of
Purchaser to pay invoices when due shall, at the option of Atlas
Copco, constitute a default in addition to all other remedies Atlas
Copco may have under these conditions of sale or applicable law.
If, in the judgment of Atlas Copco, the financial condition of
Purchaser at any time prior to delivery does not justify the terms
of payment specified. Atlas Copco may require payment in advance or
cancel any outstanding order, whereupon Atlas Copco shall be
entitled to receive reasonable cancellation charges. If delivery is
delayed by Purchaser, payment shall become due on the date Atlas
Copco is prepared to make delivery. Should manufacture be delayed
by Purchaser, pro rata payments shall become due if and to the
extent required at Atlas Copco by its contracts with the
manufacturer. All installment deliveries shall be separately
invoiced and paid for without regard to subsequent deliveries.
Delays in delivery or non-conformities in any installment shall not
relieve Purchaser of its obligations to accept any pay for
remaining installments.
FORCE MAJEURE – Atlas Copco shall not be liable for loss, damage,
detention, or delay, nor be deemed to be in default from causes
beyond its reasonable control or from fire, strike or other
concerted action of workmen, act or omission of any governmental
authori ty or of Purchaser, compliance with import or export
regulations, insurrection or riot, embargo, delays or shortages in
transportation, or inability to obtain necessary engineering
talent, labor, materials, or manufacturing facilities from usual
sources. In the event of delay due to any such cause, the date of
delivery will be postponed by such length of time as may be
reasonably necessary to compensate for the delay.
NEW PRODUCT WARRANTY – Atlas Copco warrants to the Purchaser that
all stationary compressors, portable compressors, compressed air
dyers, Atlas Copco-designed compressor parts and other Products
manufactured by Atlas Copco and affiliates shall be free of defects
in design, material and workmanship for a period of fifteen (15)
months from date of shipment to Purchaser, or twelve (12) months
from date of initial start-up, whichever occurs first, except as
set forth below or in the New Products Warranty attached hereto.
Should any failure to conform with this warranty appear prior to or
after shipment of the Product to Purchaser during the specified
periods under normal and proper use and provided the Product has
been properly stored, installed, handled and maintained by the
Purchaser, Atlas Copco shall, if given prompt notice by Purchaser,
repair or replace, the non-conforming Product or authorize repair
or replacement by the Purchaser at Atlas Copco’s expense. Replaced
Products become the property of Atlas Copco. Atlas Copco warrants
Products or parts thereof repaired or replaced pursuant to the
above warranty under normal and proper use, storage, handling,
installation, and maintenance, against defects in design,
workmanship and material for a period of thirty (30) days from date
of start- up of such repaired or replaced Products or parts thereof
or the expiration of the original Product warranty, whichever is
longer. When the nature of the defect is such that it is
appropriate in the judgment of Atlas Copco to do so, repairs will
be made at the site of the Product. Repair or replacement under
applicable warranty shall be made at no charge for replacement
parts, F.O.B. Atlas Copco Warehouse, warranty labor, serviceman
transportation and living costs, when work is performed during
normal working hours (8 a.m. to 4:30 p.m. Monday through Friday,
exclusive of holidays). Labor performed at other times will be
billed at the overtime rate then prevailing for services of Atlas
Copco personnel. The Atlas Copco warranty does not extend to
Products not manufactured by Atlas Copco or affiliates. As to such
Products, Purchaser shall be entitled to proceed only upon the
terms of that particular manufacturer’s warranty. The Atlas Copco
warranty does not apply to defects in material provided by
Purchaser or to design stipulated by Purchaser. Used Products,
Products not manufactured by Atlas Copco or affiliates and Products
excluded from the above warranties are sold AS IS with no
representation or warranty, and ALL WARRANTTIES OF QUALITY,
WRITTEN, ORAL, OR IMPLIED, other than may be expressly agreed to by
Atlas Copco in writing, INCLUDING WITHOUT LIMITATION WARRANTIES OF
MERCHANTIABILITY OR FITNESS, ARE HEREBY DISCLAIMED. Any services
performed by Atlas Copco in connection with the sale, installation,
servicing or repair of a Product are warranted to be performed in a
workmanlike manner. If any nonconformity with this warranty appears
within 45 days after the services are performed, the exclusive
obligation of Atlas Copco shall be to re-perform the services the
services in a conforming manner.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES OF QUALITY, WRITTEN, ORAL OR IMPLIED, AND ALL OTHER
WARRANTIES, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF
MERCHANTABILITY OR FITNESS ARE HEREBY DISCLAIMED. Correction of
nonconformities as provided above shall be Purchaser’s exclusive
remedy and shall constitute fulfillment of all liabilities of Atlas
Copco (including any liability for direct, indirect, special,
incidental or consequential damage) whether in warranty, strict
liability, contract, tort, negligence, or otherwise with respect to
the quality of or any defect in Products or associated services
delivered or performed hereunder.
Quote Quote number: 2689915
Date: 10/14/2021 27/28
LIMITATION OF LIABILITY – IN NO EVENT SHALL ATLAS COPCO BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, however
arising, whether in warranty, strict liability, contract, tort,
negligence or otherwise, including but not limited to loss of
profits or revenue, loss of total or partial use of the Products or
facilities or services, downtime cost, or claims of the Purchaser
for such or other damages whether on account of Products furnished
hereunder or delays in delivery thereof or services performed upon
or with respect to such Products. Atlas Copco’s liability on any
claim whether in warranty, strict liability, contract, tort,
negligence or otherwise for any loss or damage arising out of,
connected with, or resulting from this contract or the performance
or breach thereof, or from the design, manufacture, sale, delivery,
resale, repair, replacement, installation, technical direction of
installation, inspection, servicing, operation or use of any
Product covered by or furnished under this contract shall in no
case (except as provided in the section entitled “Patent
Indemnity”) exceed the purchase price allocable to the Product or
Part thereof which gives rise to the claim. All causes of action
against Atlas Copco arising out of or relating to this contract or
the performance hereof shall expire unless brought within on year
of time of accrual thereof.
PRICES – Prices to the Purchaser shall be the Atlas Copco list
price in effect at time of order. Atlas Copco may, upon thirty (30)
days prior written notice to Purchaser, change prices, or other
terms of sale affecting the Products, by issuing new price
schedules, bulletins or other notices. This contract applies to new
Products only. Purchases of used equipment shall be on terms to be
agreed upon at time of sale to Purchaser. This price does not
include any Federal, state or local property, license, privilege,
sales, service use, excise, value added, gross receipts, or other
like taxes which may now or hereafter by applicable to, measured by
or imposed upon or with respect to this transaction, the property,
its purchase, sale, replacement, value, or use, or any services
performed in connection therewith. Purchaser agrees to pay or
reimburse Atlas Copco, its subcontractors or suppliers any such
taxes, which Atlas Copco, its subcontractors or suppliers are
required to pay or collect or which are required to be withheld by
Purchaser. The price shall also be subject to adjustment in
accordance with the published Price Adjustment Clauses, which price
adjustment information shall supersede the terms of this Section 8,
where inconsistent herewith.
INFORMATION FURNISHED PURCHASER – Any design, manufacturing
drawings or other information or materials submitted to the
Purchaser and not intended for dissemination by Purchaser remain
the exclusive property of Atlas Copco and may not, without its
consent , be copied or communicated to a third party.
PATENT INDEMNITY – For purposes only of this Section 10, where
used, the designation “Atlas Copco” shall be deemed to mean Atlas
Copco North America Inc. and its subsidiaries. Atlas Copco shall at
its own expense defend any suits or proceedings brought against
purchaser insofar as based on an allegat ion that Products
furnished hereunder constitute an infringement of any claim of any
patent of the United States of America, other than a claim covering
a process performed by said Products or a product produced by said
Product, provided that such Products are manufactured by Atlas
Copco, are not supplied according to Purchaser’s detailed design,
are used as sold by Atlas Copco. Purchaser shall have made all
payments then due hereunder, and Atlas Copco is notified promptly
in writing and given authority, information and assistance for the
defense of said suite or proceeding; and Atlas Copco shall pay all
damages and costs awarded in any suit or proceeding so defended,
provided that his indemnity shall not extend to any infringement
based upon the combination of said Products or any portion thereof
with other Products or things not furnished hereunder unless Atlas
Copco is a contributory infringer. Atlas Copco shall not be
responsible for any settlement of such suit or proceeding made
without its written consent. If in any suit or proceeding defended
hereunder any Product is held to constitute infringement, and its
use is enjoined, Atlas Copco shall, at its option and its own
expense, either replace said Products with non-infringing Products;
or modify them so that they become non-infringing; or remove them
and refund the purchase price and the transportation costs thereof.
THE FOREGOING STATES THE ENTIRE LIABILITY OF ATLAS COPCO AND
AFFILIATES WITH RESPECT TO PATENT INFRINGEMENT. To the extent that
said Products or any portion thereof are supplied according to
Purchaser’s detailed design or instructions, or modified by
Purchaser, or combined by Purchaser with equipment or things not
furnished hereunder, except to the extent that Atlas Copco is a
contributory infringer, or are used by Purchaser to perform a
process, or produce a product, and by reason of said design,
instructions, modification, combination, performance or production,
a suit or proceeding is brought against Atlas Copco, Purchaser
agrees to indemnify At las Copco in the manner and to the extent
Atlas Copco indemnities Purchaser in this Section 10 insofar as the
terms hereof are appropriate.
ASSIGNMENT – Any assignment of this contract or any rights
hereunder, without prior written consent of Atlas Copco by a duly
authorized representative thereof shall be void.
TERMINATION – Any order or contract may be cancelled by Purchaser
only upon payment of reasonable charges (including an allowance for
profit) based upon costs and expenses incurred, and commitments
made by Atlas Copco.
PARTIAL INVALIDITY – If any provision herein or portion thereof
shall for any reason be held invalid or unenforceable, such
invalidity or enforceability shall not affect any other provision
or portion thereof, but these conditions shall be construed as if
such invalid or unenforceable provision or portion thereof had
never been contained therein.
REMEDIES – The remedies expressly provided for in these conditions
shall be in addition to any other remedies, which Atlas Copco may
hav e under the Uniform Commercial Code or other applicable
law.
SMARTLINK: The equipment may include a data monitoring service
called SMARTLINK. The data received by Atlas Copco may be used by
Atlas Copco and certain third party distributors and contractors
for the purpose of increasing overall customer service. Atlas Copco
will use commercially reasonable efforts to ensure that Purchaser’s
data is kept confidential. Purchaser acknowledges that the use of
the SMARTLINK is provided “as is”, that use of the service is
entirely at Purchaser’s risk, and that Atlas Copco may discontinue
the SMARTLINK service at any time. Purchaser may request
discontinuance of the SMARTLINK service at any time.
NOTE: Sale of the equipment or services described or referred to
herein at the price indicated is expressly conditioned upon the
terms and conditions set forth on the front and back of this page.
Any confirmatory action by the Purchaser hereunder, or any
acceptance of such equipment of services, shall constitute assent
to said terms and conditions. Any additional or different terms or
c onditions set forth in the Purchaser’s order or other
communications are objected to by Seller and shall not be effective
or binding unless assented to in writing by an authorized
representative of Seller.
Quote Quote number: 2689915
PAYMENT TERMS
Unless expressly agreed to in writing on a specific contract or
order, our standard payment terms are: For orders under $100,000
the payment terms shall be Net 30 days from date of shipment.
For orders over $100,000 or with lead times greater than six months
the following terms shall apply: 1. Domestic Shipments
A. 30% of order value 30 Days from date of customer’s purchase
order. B. 30% of order value after passage of 1/3 of the time from
date of customer’s order to the originally scheduled shipment
date.
C. 30% of order value after passage of 2/3 of the time from date of
customer’s order to the originally scheduled shipment date. D. 10%
of order value, net 30 days from date of shipment.
In those cases where progress payments are required, all work on
the order will cease if payment is not received in accordance with
the payment schedule.
2. Export Shipments All export shipments are subject to purchaser
arranging for an irrevocable letter of credit in favor of Atlas
Copco Compressors LLC,
from a recognized American bank. Should the order fall in a
category that requires progress payments, the letter of credit
shall be arranged to release payment in
accordance with the agreed payment schedule. 3. Payment
Retention
Payment retention will not be allowed. An irrevocable bank letter
of credit will be furnished at Atlas Copco’s expense in lieu of
retention.
4. Credit Approval All terms are subject to credit approval by
Atlas Copco Compressors LLC.
CANCELLATION SCHEDULE
Definitions: Standard Stocked Equipment - equipment as shown in the
current catalog and available for shipment from the US
Distribution
Center. Standard Non-Stocked Equipment - equipment as shown in the
current catalog but not currently stocked at the US Distribution
Center.
Engineered Equipment - equipment requiring customized features not
shown in the current catalog. Orders for Standard Stocked
Equipment
* 20% of equipment price Orders for Standard Non-Stocked
Equipment
A) Prior to release for manufacturing: * 20% of equipment
price
B) After production has started: * 40% of equipment price
C) After production has been completed: * 60% of equipment
price
Orders for Engineered Equipment A) Prior to release for
manufacturing: * 20% of the purchase price
B) After production has started * 40% of the base compressor
price
* 40% of optional equipment of purchased materials will be charged
C) After production has completed