PACE QUALIFICATION SPECIFICATIONS - Defence …cradpdf.drdc-rddc.gc.ca/PDFS/unc84/p66036.pdf · etudy of epaoe Qualification specifications ... AFSC DH 1-4, AFSC DH 2-5, ... MMS Electromagnetic

•MOO MW ~ Oncarporated .

STUDY o fSPACE QUALIFICATION

SPECIFICATIONS

PART 2 of 2

CONTRACT No 36001-9--3594/01--aV

Issue : A

April 17, 1990

pathways in Technology, Engineering and Scienc e

TEL (613) 592-0748FAX (613) 592-6553

,329 March RdSi i~

1e 202

Kanata OntanoCanada, 0K ?E 1

etudy of epaoe Qualification specifications

APFEN0iX A

Document Description Cards

20/04/90Provided - Class

0

CARDNUMBER 1000 DOCUMENT CAL 351 - P

TITLE: EHF Satcom Study Briefing

AGENCY/AUTH : Canadian Astronautics Ltd

REFERENCES

ABSTRACT Directly applicable study for EHF, pesented as viewgraph presentatio n

CLASS Design SOURCE Commercia l

---------------------------------------------------------------------

SCOPE Overview description of EHF design, including system-

tradeoffs

08/04/90Provided

•CARDNUMBER 100 1

TITLE : EMC Requirements for Space Systems

AGENCY/AUTH : DOD U.S .Air Forc e

REFERENCES

ABSTRACT

CLASS Testing

DOCUMENT MIL-STD 1541 A

SOURCE Military

----------------- .. .. ..-------------------------- ._----- ..--_------------SCOPE

0

08/04/90Provided

•CARDNUI4B ER 1002 DOCUMENT MIL-STD-810 D

TITLE: Environmental Test Methods and Engineering Guidelines

AGENCY/AUTH : DOD U .S .

REFERENCES MIL-S 901, MIL-STD-167, MIL-STD-210, MIL-STD-781, MIL-STD-1165, M

ABSTRACT Compendium of test methods to be tailored for the specific appli c

CLASS Testing SOURCE Military

-----------------------..- .. .. .. ..------------- ..------- ------ . . ..----------SCOPE 1 .1 This Standard provides :

a . Guidelines for conducting environmental engineering tasks totailor environmental tests to end-item equipment applications .

b . Test methods for determining the effects of natural and inducedenvironments on equipment used in military applications .

1. .2 Application of this standard early in the development phase ofthe aquisition process is encouraged . Selected application atother points in the acquisition process may be appropriate . Themethods of this standard are not all-inclusive . Add .iti.onal,envir.onments or combinations of environments should be included inthe environmentsl test specificat:ion when appropriate . The testmethods of this standard are intended to be applied in support ofthe following objectives :

a . To disclose deficiencies and defects and verify correctiveactions .b . To assess equipment suitability for its intended operat .ional .environment .c . To verify contractual compliance .

1 .2 Limitations This standard does not address the following :

a . Electomagnetic interferenc eb . Lightning and magnetic effect sc . Nuclear weapc;is and nuclear weapons effect sd . Piece parts such as bolts, wire, transistors and IC'se . Tests of basic materialsf . Certian aspects of the safety testing of munitions, such asrough handling tests. '

08/04/90Provided

•CARDNUMBER 1003 DOCUMENT MIL-HDBK-217 E

TITLE: Reliability Prediction of Electronic Equipment

AGENCY/AUTH: DOD U.S .

REFERENCES There are four pages of referenced documents

ABSTRACT Prepared in cooperation with industr y

CLASS Program SOURCE Military

----------------------------------------------- ..---------------- .----SCOPE 1 .1 This handbook establishes uniform methods for predicting the

reliability of military electronic equipment and systems . Iprovides a common basis for reliablity predictions czuringaquisition programs for military electronic systems and equipment .It also establishes a common basis for comparing and evaluatingreliaoility predictions of related or competitive designs .

1 .3 Computerized reliability predictionRADC-ORACLE available at cost for use on specific contract s

Contact RA[)C/F2I3ET Griffiss AFB NY 13441-5700

08/04/90Provided

•CARDNUMBER 1004 DOCUMENT MIL-HDBK-47 2

TITLE: Maintainablilty Prediction

AGENCY/AUTH : DOD U.S .

REFERENCES

ABSTRACT Aids in the design development and production of equipment

CLASS Program SOURCE Military

--------------------------------------------------------------------

SCOPE Not of direct use for equipment that cannot be maintained bycor.ventional methods .

This procedure is used to predict system downtime of airborneelectronic and electro-mechanical systems involving modularreplacement at the flight line .

04/04/90

0

CARDNUMHER 1005 DOCUMENT Volume 7 1

TITLE : Space Systems and their Interaction with Earth's Space Environme

AGENCY/AUTH : Progress in Astronautics and Aeronautics

REFERENCES

ABSTRACT Current book on space environment and spacecraft interactions

CLASS Design SOURCE AIAA

------------.. ..-------------------------_._---------------------------SCOPE Environmental effects of Space System s

Effects of Microwave Beams on the IonosphereUpper Atmosphere Modifications Due to Discharges of Water Vapourfrom Space Launch Vehicle ExhuastsModification of the Ionosphere by Large Space VehiclesArgon-Ion Contamination of the Plasmaspher eMagnetospheric Modification by Gas Releases from Large SpaceStructure sSpacecraft Charging : a ReviewSpacecraft Charging During Eclipse PassageOccurrence of Arcing and its Effects on Space SystemsSurface Discharge Effects

DOCUMENT MIL-STD 1540B

TITLE : Test Requirements for Space Vehicles

AGENCY/AUTH: Dept of Airforce U .S .

REFERENCES MIL-STD 1541 ,

ABSTRTCT Definitions of tests to be tailored for all space equipment

CLASS Testing SOURCE military

--------- ..------------------------------------- . . ..--------------------SCOPE 1 .1 This standard establishes uniform definitions,

enviromental criteria, test requirements, and test methods forspace vehicles and thier subsystems and components .

1 .2 The tailored application of theses test requirements to aparticular space program is intended to ensure a high level ofconfidence in achieving a successful space mission . This standardis intended for use in the procurement of space vehicle hardware,including space vehicles and airborne support equipment thatremain in the Space Shuttle Orbiter during orbital flight, as wellas orbital satellits .

1 .3 The tests specified herein are c1ass .if .iEd as development,qualification, acceptance, prelaunch cvalidation or other tests .

CARDNUMBER 1007 DOCUMENT MIL-E 8983 B

TITLE: Mil Spec for Electronic Equipment Extended Space Environment

AGENCY/AUTH: DOC.? U .S .

REFERENCES MIL-14 371, MIL-B-5087, MIL-C-5541, MIL-N-7513, MIL-S7742, MIL-A-8Plus other s

ABSTRACT Good top level specification for the design of space hardware

CLASS Design SOURCE Military

-----------------------------------------------------------------------

SCdP E This specification sets forth the general requirements forthe design and manufacture of electronic equipment forunmanned space vehicles . The detailed performance andindividual test requirements shall be as specified in theequipment specification or contract .

DOCUMENT MIL-STD-45662 A

TITLE : Calibration System Requirements


REFERENCES

ABSTRACT Specifies calibration system s

CLASS Testing SOURCE Military

------------------------------------------------------------------- -SCOPE 1 .1 This standard provides for the establishment and

maintenance of a calibration system to control the accuracy of themeasuring and test equipment used to a .:sure that supplies andservices presented to the government for acceptance are inconformance with prescribed technical requirements .

9

CARDNUMBER 1009 DOCUMENT MIL-STD-758 Br'

TITLE : Reliability Program for Systems « Equipment Development & Produc


REFERENCES MIL-RDBK-217, MIL-STD-105, MIL-STD-721, MIL-STD-781, MIL-STD-965

ABSTRACT General requirement, not just space top leve l

CLASS Program SCURCE Military

-----------------_--------------__---_------------------_-------------

SCOPE 1 .1 This standard provides general requirements and specific ta sksfor reliability programs during the development, production, andinitial deployment of systems and equipment .

DOCUMENT FED-STD-209 3

TITLE : Clean Room & Work Station Requirements Controlled Environments

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

----------------------------- ..- ..------------- ..---- .. ..--------.._------

DOCUMENT GSFC-S-700-42

TITLE: Connectors Elec . Rectangular. Power & Coaxial Contacts for Spac e

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------..-----------------------------------------------------------SCOPE

CARDNUMBER 1012 DOCUMENT GSFC-S-700-42/ 2

TITLE: Connectors, Electrical Rectangular Polarised Shell, for Spac e

AGENCY / AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

----..--------------------- - --------------- ..-------------------------

SCOAE

CARDNUMBER 1013 DOCUMENT GSFC-S-700-42/ 2

TITLE : Contacts, Power, Coaxial, Removable, for Electrical Connector s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

------- -------------------------------------------------------------

SCOPE

08/04/9 0

CARDNUMBER 101 4

TITLE: ESA Software Engineering Standard

AGENCY/AUTH : European Space Agency

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT ESA SSC (84) 1

..------------------------ .. ..-----------------------------------------

SCOPE

CARDNUMBER 1015 DOCUMENT MIL-STD-975 E

TITLE: NASA Standard Elec . Electronic & Electromechanical Parts Lis t


REFERENCES

ABSTRACT

CLASS SOURC E

--------------------------------------------------------------------

SCOPE

CARDNUMBER 1016 DOCUMENT

TITLE : Report on Orbital Debri s

AGENCY/AUTH : Interagency Group for Nat . Security Council 1989

REFERENCES

ABSTRACT

CLASS SOURCE

--------- -------------------------------------------------- ..--------

SCOPE

CARDNUMBER 101 7

TITLE: GSFC Aerospace Standards

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT X-560-63-2

SCOPE

CARDNUMHER 101 8

TITLE : CTS Test Plan

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT CTS-3100- 1

SOURCE

----------------------------------------------------------------------

SCOPE

CARDNUMBER 101 9

TITLE : IRÎG Telemetry Standards

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT 106/7 1

SCOPE

04/04/9 0

CARDNUMBER 102 0

TITLE: IRIG Document Antenna Patterns

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S

SCOPE

SOURCE

DOCUMENT 106/61

DOCUMENT NUB 5300-4 (1C )

TITLE : Inspection System Provisions for Aeronautical & Space Syste m

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

_ ..------------------------------------------------- ..____-- ..._-----___

SCOPE

CARDNUMBER 1022 DOCUMENT NHB 8060-1A

TITLE : Flammability, Odar & Offgassing Requirements & Test Procedures

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------------------------------------- -----------------SCOPE

04/04/9 0

CARDNUMBER 1023 DOCUMENT 15 M 0000 2

TITLE : Elec . Electronic & Electromechanical Parts Program Requirement s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------------__-__----- .--------__-------_- ..------------

SCOPE

04/04/9 0

.

CARDNUMBER. 1024 DOCUMENT MSFC-SPEC-52 1

TITLE : EMC Requirements on Spacelab Payload Equipment

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

CARDNUMBER 1025 DOCUMENT MSFC-SPEC-52 2

TITLE : Design Criteria for Controlling Stress Corrosion Cracking

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

DOCUMENT MSFC-HDBK-52 7

TITLE : Material Selection for MSFC Spacelab Payload s

AGENCY / AUTY :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------------------- ----SCOPE

DOCUMENT JA 31 (78-13 )

TITLE : MSFC Letter, Subjects Dynamic Environ . Design & Test Criteri a

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

--------------------- ..------------------------ ..----------------------

SCOPE

DOCUMENT JSC 0268 1

TITLE : Material Design Guidelines & Test Data Handboo k

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

CARDNUMBER 1029 DOCUMENT JSC 1112 3

TITLE : Space Transportation System Payload Safety Guidelines Handbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------- ..----------------------------------------- ..-----------------

SCOPE

CARDNUMBER 1030 DOCUMENT SPR-R-002 2

TITLE: General Specification, Vacuum Stability Requirements of Polymer i

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------- ..- ..-----------------------------.._ .._-------------SCOPE

08/0ti/90Provided

•CARDNUMBER 1032

PRECEDING PAGE BLAN K

DOCUMENT MIL-STD-461 C

TITLE: Electromagnetic Emission & Susceptibility, Cotitrol of EM I


REFERENCES MIL-E-6051, MIL-STD-285, MIL-STD-462, MIL-STD-463, MIL-STD-480,MIL-STD-•704, MIL-STD-1377(NAVY), MIL-STD-1385(NAVY),MIL-STD-1512(USAF), MIL-STD-1541(USAF), MIL-STD-1542(USAF),

NAT-STD-3516, NAT-STD-3614, NAT-STD-365 9

MIL-HDBK-235, MIL-HDBK-237, MIL-HDBK-241, MIL-HDBK-253AFSC DH 1-4, AFSC DH 2-5, AFSC DH 2- 7AMC Pamphlet 706-23 5 , AMC Pamphlet 706-41 0

ABSTRACT

CLASS Design SOURCE MIL STD

------------ ..--------------------------------------------------------

SCOPE This Standard establishes the documentation and designrequirements•for the control of the electromagnetic emission an d

• susceptibility characteristics of electronic, electrical andelectromechanlcal equipment and subsystems (as defined herein)designed or procured for use by activities and agencies of theDepartment of Defense . Such equipment and subsystems may be usedindependantly or as an integral part of other subsystems orsystems .

08/04/90Provided

0

CARDNUMBER 1033 DOCUMENT MIL-STD-46 2

TITLE : Electromagnetic Interference Characteristics, Measurement o f


REFERENCES MIL-STD-461, MIL-STD-463,

ABSTRACT

CLASS Design SOURCE Mil Std

-----------------------------------------------------------------------SCOPE This-standard establishes techniques to be used for th e

measurement and determination of the electromagnetic interference

characteristics (emission and susceptibility) of electrical,electronic, and electromechanical equipment, as required by

MIL-STD-461

CARDNUMBER. 1034 DOCUMENT NHB 1700-7 A

TITLE : Safety Policy & Standards for Payload using the ST S

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

CARDNUMBER 103 5

TITLE : STS Payload Ground Safety Handbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT KHB 1700- 7

SCOPE

04/04/9 0

CARDNUMBER 1036 DOCUMENT MSFC SPEC 52 2

TITLE: Design Criteria for Controlling Stress Corrosion Checking

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

0

CARDNUMBER 103 7

TITLE : MMS Electrical System SPEC

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT GSFC S-700-1 4

SCOPE

04/04/90

40CARDNUMBER 10 2 8

TITLE : Solar Cell Radiation Handbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT JPL DOC #82-6 9

---------------------..----------------------------------------------SCOPE

04/04/9 0

CARDNUMBER 103 9

TITLE : MMS Mechanical System SPEC

AGENCY/ AYJTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT GSFCS-700-1 3

SOURC E

--- ..------------------------------------------------- ..--------------

SCOPE

0

CARDNUMBER 1040 DOCUMENT GSFC S-700-4 0

TITLE : MMS Electromagnetic Compatibility SPEC

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

CARDNUMBER 1041 DOCUMENT NSS-HP-1740- 1

TITLE: NASA Aerospace Pressure Vessel Safety Standard

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S

SCOPE

SOURCE

04/04/9 0

0

CARDNUMBER 1.042 DOCUMENT G SFC S-700-4 2

TITLE : MMS Connectors, Electrical Rectangular for Spaceflight us e

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

SCOPE

04/04/9 0

•CARDNUMBER 1043 DOCUMENT JSC 1404 6

TITLE : Payload Interface Verification Requirement s

AGENCY / AiJTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

•CARDNUMBER 1044 DOCUMENT GSFC 731-0005-8 3

TITLE : General Fracture control. Plan for Payloads Using ST S

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S SOURC E

-------------------------------------------------------------------

SCOPE

DOCUMENT SPAR DOC#258585 3

TITLE: Radarsat Environmental & Test SPEC

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

SCOPE

SOURCE

4)

04/04/9 0

CARDNUMBER 1046 DOCUMENT SPAR DOC#258584 7

TITLE: Radarsat Safety Engineering Requirment s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

SCOPE

CARDNUMBER 104 7

TITLE: PCM Telecommand STD ESA TTC-A--01

AGENCY/AUTH : European Space Aqency

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT ESA TTC-A-0 1

----------------------__-----------------------------------------------SCOPE

04/04/9 0

0

CARONUMBER 104 8

TITLE : PCM Telemetry Standard

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT ESA TTC-A-0 2

SCOPE

CARDNUMBER 1049 DOCUMENT ESA TTC-B-0 1

TITLE: Spacecraft Data Handling Interference Standards

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

---- ..- ..-------------------------------------------------------------

SCOPE

CARDNUM$ER 1050 DOCUMENT ASTM E 595-7 7

TITLE: Total Mass Loss & Collected Volatile Condensable Material s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/90

•CARDNUMBER 1051 DOCUMENT NHB 5300-4

TITLE : Requirements for Electrical Soldered Connections

AGENCX/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

---------------------------------------------- ..-..-------------------SCOPE

CARDNUMBER 105 2

TITLE: Soldering Electrical Connections

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT NASA SP- 5 00 2

SCOPE

04/04/9 0

CARDNUMBER 1053 DOCUMENT X-764-71-314

TITLE : A Compulation of Low Outgassing Polymeric Material s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

CARDNUMBER 105 4

TITLE: NHB 1700-1 (U1 )

AGENCY/AUTH: Basic Safety Requirements

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT

..---..----------------- --------------- ..------------------------------

SCOPE

06/04/9 0

0

CARDNUMBER 1055 DOCUMENT S-320-G- 1

TITLE: General Environmental Test Specification for Spacecraf t

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

DOCUMENT NATO AQAP- 6

TITLE : Measurements & Ga .lzbration Sy stem Requirements for Industry

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

CARDNUMBER 1057 DOCUMENT JFK GP 359

TITLE : Liquid Propeiiants Safety Handboo k

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

0CARDNUMBER 105 8

TITLE : Handling Hazardous Materials

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT NASA SP-503 2

SCOPE

04/04/90

•CARDNUMBER 1059

TITLE : Microwave & Radar Hazards Handbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT JFK SP 4-42- S

SCOPE

04/04/90

CARDNUMBER 1060 DOCUMENT NASA tN D-714 1

TITLE : Apollo Experience Report Spacecraft Pyrotechnic ^yyste m

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

------------------------------------------------------------------------SCOPE

04/04/9 0

•CARDNUMBER 1062


DOCUMENT SPAR # 258585 3

TITLE: Radarsat Environmental Design & Test Specificatio n

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

10/04/9 0

•CARDNUMBER 1063 DOCUMENT MIL-STD-48 3

TITLE : Configuration Management Practices for Systems, Equipment


REFERENCES DOD-D-1000, MIL-Q-9858, MIL-L-9931, MIL-P-15024, MIL-I-45208, MIL-S-83490, DOD-STD-100, MIL-STD-129, MIL-STD-130,DOD-STD-480, MIL-ST

D-481, MIL-STD-482, MIL-STD-490, MIL-STD-499, MIL-STD-1167, MIL-STD-1168, MIL-STD-152 1

ABSTRACT

CLASS SOURCE

------------------------------------------------------------------ .--

SCOPE 1 .1 This standard establishes requirements for configuration

management .

08/04/90

0CARDNUMBER 1064

TITLE : Specification Practices


REFERENCE S

ABSTRACT

CLASS SOURCE

DOCUMENT MIL-STD-49 0

SCOPE

04/04/90

0CARDNUMBER 1065

TITLE: Explosives Safety Handbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CL'4SS SOURCE

DOCUMENT JFK GP-46 9

SCOPE

08/04/9 0

0

CARDNUMBER 1066 DOCUMENT MIL-HNBK 235 1A

TITLE : Electromagnetic Environment Considerations for Desigr & Procure m


REFERENCES

ABSTRACT

CL?'&SS SOURCE

------- -------------------------------------------------------------

'SCOPE

08/04/9 0

•CAP'.i)NUMBER 1067 DOCUMENT MIL-HNDB-237A

TITLE: Electromagnetic compatibility Management Guide for Platforms ,


REFERENCES

ABSTRACT

CLASS SOURCE

------ - ---------------•-------------------------------------- .----SCOPE

44/04/9 0

•CARDNUMBER 1 0 68 DOCUMENT ASTM E268-84 A

-TITLE : Electromagnetic Testing, standard Definitions of Term s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

__- ...__ - --_-_--_-_.--------------------------- -_____--__---____-_ - --__

SCCJPE

04/04/9 0

•CARDNUMBER 1 0 69 DOCUMENT NAT-STD-351 6

TITLE : Electromagnetic Compatibility for Aircraft Ele.c .&Elctronic Equi p

AGENCY/AUTH :

REFERENCES

ABSTRACT

CI.,ASS SOURC E

-----------------------------------------------------------------------

SCai`'E

08/04/90

0

CARDNUMff3ER 1071 .

TITLE : Electromagnetic Compat . (EMC) and Grounding Requir . for Space Sys

AGENCY/AUTH : DOD U .S . USAF

REFERENCES MIL-E-4158, MIL-F-15733, MIL-STD-188-124, MIL-STD-220A,

MIL-STD-285, MIL-STD-461, MIL-STD--462, MIL-S`.rD-463,

MIL-STD-889,MIL-STD-1541,MIL-HDBK-419

NACSIM 5203 (C), NACSEM 5204 (C )

pRrC[D1N G PAGE BLAN~;

DOCUMENT MIL-ST.7-1542 A

A t3 S'I't2AC'l '


SCOPE The purpose of this standard is to specify tl ;,e design, performanceancl verification requirements for electrical subsystems for spacesystem facilities, including electromagnetic compatibi.l it:y ( E MC.),electrical power clr.ounding, bonding, shielding, lightnin gprotection, and r.C'l.,,MPk Fa'.I' secur ity . These reclu irement.s areinterre]_atcc:l and interdependent, and therfore rcctuire a ndir.teqrszted approach in the design .

04/04/90

- 19.::ARDNïJME3FR :L 073 DOCUMENT ANCI C95-- 3 -7 3

r.,"ITLE : Radiation, Electromagnetic, Potentially Hazardou s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CI:.,Af3S

SCOPE

SOURCE

08/04/9 0

CARDNUMBER - 1.ü 74 DOCUMENT MIL-S•°8357 6

TITLE : Solar Cell Arrays, Space Vehicle, Design & Testing, Ground Spec .

AGENCY/AU'CH : DOD U .S .

REFERENCES

ABSTRACT

CLASS SOURC E

SCOPE

04/04/9 0

•CARDNUMBER 1 07 5

TITLE: Particulate Matter in the Atmospher e

AGENCY / AUTFi :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT ASTM T)1704 -713

SCOPE

04/04/9 0

0

CARDNUMBER 1.076 DOCUMENT ARP 78 5-•6 3

TITLE : Particle Contamination of air in dust Controlled Spaces

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S

SCOPE

SOURCE

04/04/9 0

•CARDtdUMBER 1 0 77 DOCUMENT A STM E722-8 0

TITLE : Electronics, Radiation Hardness Test of Determining Neutron Ene r

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOt.I12CP,

-----------------------------------------------------

SCOP E

04/04/9 0

•CARDNUMBER 1 078 DOCUMENT ASTM E7 20 -8 0

TITLE : Electronics, Selection of Neutron Activation Foil s

AGENCït / AUTH :

REFERENCES

ABSTRACT

C%aASS

SCOPE

SOURCE

10/04/90

0

CARDNUMBER 1079 DOCUMENT MIL-STD-1686A

TITLE : Electrostatic Discharge Control Program for Protection


REFERENCES MIL- E-17555, MIL-STD-785, MIL-STD-1285, DOD-HDBK-263

ABSTRACT

CL.ASS SC7UI3Ci :̂

----------------------------------------- ----------------------------

SCaPE 1 .1 The purpose of this standard is to establish therequircments for an E S D control prcacjram to minimize the effects o fESD on parts, assemblies, and equipment . An effective E S1.7 controlprogram wi1.l increase reliability, decrease maintenance actionsand lifetime cost . This standard may be tailored for various typesof acquisistions .

08/04/9 0

•CARDNUMBER 1080 DOCUMENT MIL--A-17161 D

TITLE : Absorber, Radio Frequency Radiation, General Specification for

AGENCY/AUTH: DOD U . S .

REFERENCES

ABSTRACT

CL.ASS SOURCE

------------------------------------------

SCOPE

AM&

10/m4/9 0

ECARDNUMSER 1081 DOCUMENT MIL-STD-1621A

TITLE : Acoustical & Vibrational Standard Reference Quantities


REFERENCES

ABSTRACT

CLASS SOURCE

---------------------------------------------------------------------

SCOI'E 1 .1 This standard covers reference quantities to be used inreporting of all acoustical and vibrational quantiti_e ., expressedin terms of levels . it also defines acoustical terms an dprescribes the plott4g format for acoustical measurements .

CARDNUMBER 1 0 82 DOCUMENT MIL HNDBK 5 E

TITLE: Aerospace Vehicle Structures, Metalic Materials & Elements f or

AGENCY/AUTH: DOD U .S ., also FAA Wright Patterson AFB

REFERENCES

ABSTRACT Comprehensive manual for the use of metal in aerospace structures .The data is presented in two volumes and they are quite large . Thedata is for detailed design .

CLASS L)esig n SOURCE Mil Handbook

--------------------------------------------------------------------

SCUPI~~. This document is intended pri.mari.l.y as a source of desig nallowables which are those strength properties of metallicmaterials and elements (primarily fasteners) that are widely usedin the design of aerospace structures . This document also containsinformation and data for other properties and characteristics ,such as .f rac.t:ur. e toughness strength fatigue strength, creep:;trcngth, rupture stroncjth, fatigue cracking propaqati.on rate andresistance to stress corrosion cracking . The use of this type ofinformation is not manadatory, Those properties presented a sdes icIn allowables are listed as A and B or S values . Data forother properties are presented as typical .

DOCUMENT ASTM E349-7 2

TITLE: Standard Definitions of Terms Relating to Space Simulatio n

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S SOURCE

SCOPE

04/04/90

0CARDNUMBER 1084 DOCUMENT ASTM E 434-7 1

TITLE : Standard Test Method for Calorimetric Deter . of Hemispherica l

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

-------------•---- ---------------------------------------------------

SCOPE

04/04/90

CARDNUMBER 1085 DOCUMENT ASTM-E49 0

TITLE : Standard Solar Constant & Air Mass Zero Solar Spectral Irradianc

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

---------------------------------------- ....--------.. ..-------------•---SCOPE

0

04/04/9 0

0CARDNUMBER 1086 DOCUMENT ASTM-491-7 3

TITLE: Standard Practice for Solar Simulation for Thermal Balance Tes t

AGENCY / AUTH :

REFERENCES

ABSTRACT

CLASS

SCOPE

SOURCE

0

04/04/9 0

•CARDNUMBER 1087 DOCUMENT ASTM-E512-7 3

TITLE : Standard Practice for Combined, Simulated Space Envir . Testing

ACENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

0

04/04/9 0

CARDNUMBER 10 8 8 DOCUMENT ElA 365-6 9

TITLE : Performance Test Procedure for Solar Cells & Cal . Procedure

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

06/04/9 0

0CARDNUMBER 1089 DOCUMENT IEEE C95 .1-8 2

TITLE : Safety Levels with Respect to Human Exposure to Radio Frequency

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

----------------------------------------- ..--------------------------SCOPE

0

04/04/9 0

0CARDNUMBER 1090 DOCUMENT IEEE C95 .5-8 1

TITLE : Recommended Prctice for Measurement of Hazardous Electromagnetic

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

-------------------------------- ..------------------------------------

SCOPE

06/04/9 0

0CARDNUMBER 1091 DOCUMENT ASTM E834-8 1

TITLE : Standard Practice for Determining Vacuum Chamber Gaseous Envir .

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

- .» ..----------------------- .. ..----------------------------------------SCOPE

04/04/9 0

0

CARDNUMBER 1092 DOCUMENT Plastec R12-6 2

TITLE : Effects of Space Environment on Plastics

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

06/04/9 0

•CARDNUMBER 1093 DOCUMENT SAE AMS 3084A-8 6

TITLE : Lubricant Space Appplications, Minimal Outgassin g

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

-------------------------- ..-..---------------------------------------SCOPE

0

04/04/9 0

CARDNUMBER 1094 DOCUMENT IPCTM-6502 .6 .48 6

TITLE : Outgassing Multilayer Printed Wiring Boards Test Methods Manua l

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

---------- - -----..------------------------ ..--------------------------SCOFE

04/04/9 0

•CARDNUMBER 1095 DOCUMENT ASTM F1227-8 9

TITLE: Standard Test Method for TotalLoss of Materials and Compensatio n

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------------------------------- ------ -.----------------

SCOPE

0

06/04/9 0

0

CARDNUMBER 1096 DOCUMENT SAE AIR 1167-7 0

TITLE : Environmentai Criteria & Tests for. Aerospace Ground Equipment

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------------------------------------- ..------------------SCOPE

04/04/9 0

•CARDNUMBER 1097 DOCUMENT ASTM E668-7 8

TITLE : Standard Practice Foil the Application of Thermolumi .nescence

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOLTI:CL

-------_------------ ...-..----------_ .._------------- --------------------------SCOPE

04/04/90

0CARDNUMBER 1098 DOCUMENT ASTM E720• - 8 6

TITLE: Standard Guide for Selection of a Set of Neutron Activation Foi l

AGENCY / AUTiï :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/90

0

CARDNUMBER 1099 DOCUMENT ASNT 101Sec14-5 9

TITLE: Electronic Radiation Sources Nondestructive Testing Handboo k

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S

SCOPE

SOURCE

----------------------------------------

06/04/90

0CARDNUMBER 110 0

TITLE: Radiation Detection & Recording

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS S

SCOPE

SOURCE

DOCUMENT ASNT 1 28 Sec4-8 5

-------------------------------------------

DOCUMENT IEEE C95-3- 7 3

TITLE: Techniques & Instrumentation for the Measurement of Potential s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

06/04/9 0

CARDNUMBER 1102 DOCUMENT ANS 6 .4 .2-8 5

TITLE : Specification for Radiation Shielding Mater~als

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

SCOPE

SOURCE

06/04/90

•CARDNUMBER 1103 DOCUMENT ASTM F 25-6 8

TITLE : Standard Test Method for Sizing & Counting Airborne Particulat e

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

-•-,------------------------------------------------------------------

SCOP E

•

-04/04/90

•CARDNUMBER 1104 DOCUMENT ASTM E251-8 6

TITLE : Standard Test Methods for Performance Charac . of Bonded Resista n

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

---------------------- ..-..---------------_-,--..------- ..---------------SCOPE

04/04/9 0

•CARDNUMBER 1 105 DOCUMENT IEEE 4-7 8

TITLE : Standard Techniques for High Voltage Testin g

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

-----------------------

SCOPE

SOURCE

04/04/90

•CARDNUMBER 1106 DOCUMENT

TITLE: S/C Environmental Design & Test Specificatio n

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

-------------------------------------- ..-- ..------------_-------------

SCaPE

04/04/90


TITLE: S/C General Design & Interface Requirements

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

--------------------------------------------------------------------

SCOPE

04/'04/9 0

0

-CARDNUMBER 110 8

TITLE: Development Plan

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT

SOURC E

-----_- ..-------- ...- ...------ - ------- ..--..- ------------------------------SCOPE

CARDNUMBER 1109

TITLE: PA Plan

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT

SOURCE

---- ..------------------------------------------------------®--------

SCOPE

0

04/04/90


TITLE : Product Assurance Requirements on Sub Contractor s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

.,-..----------------..-- ..-----------------------------_ ..---------------SCOPE

04/04/9 0

0CARDNUM^" ~ 111 1

TITLE : Approved Materials & Processes

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT

..---..----..-------------------------------------------- ..------_-----_ wSCOPE

04/04/9(1

ECARDNUMBER 111 2

TITLE: EGSE Requirements Specification s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT

---------------------------------------------------------------------

SCOPE

DOCUMENT

TITLE : MGSE Requirements Specifications

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

-..-..- ..--------------------------------------------_------------------

04/04/90

•CARDNUMBER 111 4

TI'CLE : Ground Station PA Plan

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT

SOURCE

--------..----------------------------------- ..- ..--..------------- ..----SCOPE

04/04/9 0

0

CARDNUMBER 1115 DOCUMENT

TITLE : Launch Vehicle Interface Requirement s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLA,SS SOURC E

------- .----------------- ..-- ..--------------------------- I-------------SCOPE

04/04/9 0


TI TLE : EGSE & Check-out Software Specii:icatior.

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

-------------------------------------------------------- .------------

SCOPE

04/04/9 0

0

CARDNUMBER 111 7

TITLE : AIT & Verification Plan

AGENCY/AUTH :

REFERENCES

ABSTRACT

Cr.,ASS

DOCUMENT

SOURCE

SCOPE

08/04/90Provided

0CARDNUM$ER 1 1 18 DOCUMENT MIL-STD-889 B

TITLE: Dissimilar Metal s


REFERENCES MIL-S-8802

ABSTRACT

CLASS Design SOURCE Mil St d

--------------------------------------------------------- - ----------

SCOPE This Standard defines and classifies dissimilar metals, andestablishes requirements for protecting coupled dissimilarmetals, with attention directed to the anodic member of thecouple, against corrosion .


DOCUMENT TES/LC/43610

TITLE : Satellite Test Requirements

ACENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

------------------------- ..--------_------_-..------------------------SCOPE

04/04/9 0

0

CARDNUMBER 112 1

TITLE: Test Facilities Plan

AGIENCY /AUTii :

REFERENCES

ABSTRACT

CLASS

DOCUMENT PLN/LCS/4385 1

SOURC E

----------- ------------ ..--------------------------------------------SCOPE

CARDNUMBER 1122 DOCUMENT TTC-B-O1 (ESA )

TITLE: S/C Data Handling Interface Standards

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

-----------------------------------.-------- ..--..---------------------

SCOPE

04/04/9 0

•CARDNUMBER 112 3

TITLE : PCM Telecommand Standard

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT ESA-PSS-4 5

SOURCE

----- ------------------------------------- ..-------------------------SCOPE

04/04/90

•CARDNUMBER 112 4

TZTLE! PCM Telecon ►mand Standard

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT ESA-PSS-4 6

SOURCE

-------------.--------- ..----- ----------------------------------------

SCOPE

0

04/04/9 0

•CARDNUMBER 11 2 5

TITLE : Telemetry Cading Standards

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT TTC-A-03(ESA)

SCOPE

04/04/9 0

•CARDNUMBER 112 6

TITLE: Ranging Standard

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT TTC-A-04 ESA

SCOPE

04/04/9 0

0

CARDNUMBER 112 7

TITLE : Radio Frequency Modulation Standard s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT TTC-A-05 ESA

---------------------------------------------------- ..--------..-------

SCOPE

04/04/9 0

CARDNUMBER 1128 DOCUMENT ESA-PSS-2 5

TI'- E : Specification for Silicon Solar Cell s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

08/04/9 0

•CARDNUMBER 112 9

TITLE : ESA Software Engineering Standards

AGENCY/AÜTH: European Space Agency

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT ESA BSSC ( 84 )

-----------------------------------------------------------------------SCOPE

04/04/9 0

0

CARDNUMBER 1130 DOCUMENT K-STSM-14 .1RevB

TITLE : Launch Site Accommodations HandbooY for STS Payload

AGENCY/AUTHt

REFERENCES

ABSTRACT

CLASS SOURCE

-------------- ..--------------------------------------..-----------SCOPE

04/04/9 0

•

CARDNUMBER 113 1

TITLE : Payload Integration Plan

AGENCY/AUTH :

REFERENCES

ABSTRACT

Cl .ASS

DOCUMENT (STS/Payload )

SOURCE

---------------------------------------------- .------- ..---__---------

SCOPE

04/04/90

~

CARDNUMBER 1132 DOCUMENT NHB 1700 .1(V1-A )

TITLE : Safety Policy & Requirements for Payloads Using the STS System

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--- .»------------------..--.----------------..---------------- ..---------

SCOPE

04/04/9 0

•CARDNUMBER 11.33 DOCUMENT

TITLE : STS/Payload Interface Control Document

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

SCOPE

04/04/90

isCARDNUMBER 113 4

TITLE : STS Reimbursen,ent Guide

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT JSC 1180 2

SCOPE

04!04/50

•CARDNUMBER 113 5 DOCUMENT SD77-SH-0214 A

TITLE : Space Transportation System Models Configuration Management/Cont

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

------ - ------..--- ..--------------------------------------------------

SCOPE

04/04/9 0

0CARDNUMBER 1136 DOCUMENT JSC 184 6 8

TITLE : Mission Integration Control Board Configuration Management Proc .

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

--.. ..---..--------------------------------------------------....---------SCOPE

04/04/9 0


TITLE : Shuttle/Payload Integration Activities Pla n

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

----------------------------------------------------------------SCOPE

04/04/90


TITLE : Space Shuttle System Payload Accommodation s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

SCOPE

SOURCE

.

04/04/9 0

CAFJ)NUMBER 1139 DOCUMENT JSC 14686,Jan 7 9

TITLE : Criteria/Guidelines for Payload Thermal Math . Models for Integrat

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

---------------------------- -------------------------------------------SCOPE

04/04/9 0

0CARDNUMBER 1140 DOCUMENT MSFC-STD-512A

TITLE : Requirements for Weightless Environment

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

-04/04/9 0

0CARDNUMBER 114 1

TITLE: EVA Description & Desiq, . Criterial.

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLAS.i SOURCE

DOCUMENT NASA/ JSC 1061 5

SCOPE

04/04/9 0

•CARDNUMBER 1142 DOCUMENT GSFC-S-700-42/ 1

TITLE: Connectors, Electrical Rectangular, Polarized Shell for Space F l

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

------------------------------------------------------------------- ---SCOPE

04/04/9 0

0CARDNUMBER 1143 DOCUMENT GSFC-S-700-42/ 2

TITLE : Contacts, Power & Coaxial Removable, for Electrical Connector s

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

--------------------------------------------------------------------SCOPE

DOCUMENT MIL-STD-83575A

TITLE: Wiring Harness,Space Vehicle,Design & Testing (See DOD-W-83575A )

REFERENCES MIL-C-17, MIL-W-'5088, MIL-W-5846, MIL-C-38999,MIL-C-39012, MIL-C-55544, MIL-W-81044, MIL-W-81381, MIL-C-83723, MIL-C-83733, MIL-STD-143, MI]~•-STD-86 3

ABSTRACT

CLASS SOURCE

---------------------------------------------------------------------

SCOPE This specification covers the general design and testingrequirements for electrical wiring harnesses and cables that areto be installed in space vehicles .

08/04/90

0CA^'--"',JMBER 1145 DOCUMENT MIL-C-3899 9

TITLE: Connector, Electrical, Circular, Miniature, High Density ,


REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

os/o4/9 0

CARDNUMBER 1146 DOCUMENT MIL-C-8372 3

TITLE : Connectors, Electrical, Circul.ar, (environment resisting )


REFERENCES

ABSTRACT

CLASS SOURCE

SCOPE

04/04/9 0

0CARDNUMBER 114 7

TITLE : Armament Design Handbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT AFSC DH2- 5

SCOPE

04/04/90

CARDNUMBER 114 8

TITLE: EMC Design liandbook

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT AFSC DH-1- 4

SOURCE

----..-_-..-- .._ ..------------------------------------------------------

SCOPE

04/04/9 0

•CARDNUMHER 114 9

TïTLE: Range Safety Manual

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT AFWTR 127--].

SCOPE

S}9/04/y 0

CARDNUMBER 1150 DOCUMENT MIL B-5087B(ASG)

TITLE : Bonding, Elec . and Lightning Protection for Aerospace Sywtems


REFERENCES MIL-L-6806, MIL-STD-143, MS25083, MS33586, MS35337, MS 3 5339, AN526, AN735, AN742, AN935, AN960, NAS679, NAS68 0

ABSTRACT

CLASS SOURCE

----- ------------------------- ..---- ..----------------------------------SCOPE 1 .1 This specification covers the characteristics,

application, and testing of electrical bonding (see 6 .2 .2) for

aerospace systems, as well as bonding for the installation and

interconnection of electrical and elecronic equipment therein, and

lightning protection .

08/04/9 0

•CAR.D2diINiBER 1151 DOCUMENT MIL E-60 51 D

TITLE: Elect romagnetic Compatibility Requirements Systems (Amendment 1 )

AGENCY,+' AUTH : DOD U .S .

REFERENCES MIL-C-5, MIL-B-5087, MIL-0-11693, MIL-C-12889,MIL-C-15733, MIL-l'--2401 4MIL-STD-454, KIL-S':t'D-461, MIL-STD-462, MIL-STD-704, MIL-STD-831,MS25384, M59029 8AFSM 80-7, AFSCM 80-9 VOL 1V

ABSTRACT

CLASS Design SOURCE DOD US

-------------_------ ..- W - . . ..- ..--- ..------..---------------------------------SCOPE This specification outlines the overall requirements for systems

electromagnetic compatibility, including control of the systemelectromagnetic environment, lightning protection, staticelectricity, bonding and grounding, It is applicable to completesystems, i.ncluding all associated subsystems/equipments .

08/04/9 0

0- CARDNUx+SBER 1153

PRECEDiNG PAG E BLAN K

DOCUMENT MIL-STD-8' 3

TITLE : Minimization of Hazards of Electromagnetic Radiation to Electro n


REFERENCES

ABSTRACT

CLASS SOURCE

---------------..----------_- ..------ - ----_--- .. -----_-..---_------SCORE

04/04/9 0

CARDNUMBER 1154

TITLE : .,referred Finishes

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT

SCOPE

09/04/9 0

0CARDNUMBER 1156


DOCUMENT MIL--STD-151 2

TITLE : Electro Explosive Subystems Flec . Initiated, test Methods & Des i

AGENCY /ALTTH : DOD U .S .

REFERENCES MIL-B-5087, MIL-E-5400, MIL-E-6051, MIL-E-8189, MIL-E-8983, MIL-I-

23659, FED-STD-595, MIL-STD-171, MIL-STD-186, VAIL- -STD-202, MIL-STD

-331, MIL-STD-453, MIL-STD-454, MIL-STD-461, MIL-STD-681, MIL-STD-709, MIL-STD-810 ,MIL-STD-863, MIL-STD-882, MI1.,-^TD-14'72, MS5170 0

ABSTRACT

CLASS SOURCE

SCOPE 1 .1 The purpose of this document is to establish uniformdesign and. qu<<V-f ication requirements and test methods for thedesign, development, and acceptance of all electroexplosivesubsystems and component parcs .

08/04/9 0

CARDNUMBER 115 7 DOCUMENT MIL-STD-C-554 1

TITLE : Chemical Conversion Coatings on Aluminum & Aluminum Alloy s


REFERENCES

ABSTRACT

CLASS SOURCE

-------------------------------------------------------------------------SCOPE

04/04/9 0

0CARDNUMBER 1 15 8

TITLE : Payload Verification Reqisirements

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

------------------------- -------------------

DOCUNiENT JSC 14046,Rev a

SCOPE

04/04/9 0

0CARDNUMBER 1 :159 DOCUMENT K-CM-04 . 2

TITLE : Instructions for KSC CP Configuration Control Board tJperation s

AGENCY / AUTt-i :

REFERENCES

ABSTRACT

CLASS SOURC E

-----------------------------------------------

SCOPE

04/04/9 0

CARDNUMBER 1160 DOCUMENT JSC 169 7 9

TITrLEa Shuttle Orbitor Failure Modes & Effects Associated with Standard

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURC E

------------- ..----------------------------------------------- -------SCOPE

04/04/9 0

eCARDNUMBEP 116 1

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT GSFC-S -311 Pg . 4

SOURCE

-------------------------------.----- ..-.------------------------------SCOÉ E

04/04/9 0

goCARDNUMBER 116 2

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT GSFC--S•-311 Pg .1 1

SCOPE

04/04/9 0

•CARDNUMBER 116 3

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT rSFC-S-311 Pg .12

SOURC E

--------------------- ....---- -------- ------------- -------------------..-SCOPE

04/04/9 0

eCARDNUMBER 1164

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT GSFC-S-311 Pq . 1 3

SOURC E

------------- .___-__-_._--------------------------- ..---_-_--_--_------

SCOPE


sCARDNUMBER 1165 DOCUMENT CAL 35 1

TITLE: Military Comsat Orbit Investigation

AGENCY/AUTH : Canadian Astronautics Ltd

REFERENCES

ABSTRACT Trade-off study of effectivness of orbits for milsatcomCompleted in 198 5

CLAS S, Design SOURCE Commercia l

-----------------------------------------------------------------------

SCOPE ?rade-off analysis of generic orbitsMolniya 8 and 12 hou rCircular inclined geosynchronousGeostationaryElliptical inclined geosynchronousCircular polarNear pola rElliptical inclined non-synchronousPeriod greater than 24 hours

O4/n4/9 0

•CARDNUMBER 1 1 6 6

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT GSFC-S-311 Pg .1 5

SOURCE

--------------------------------------------------------------------------SCOPE

04/04/9 0

CARDNUMBER 116 7

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT GSFC-S-311 Pg .1 6

:̀ 73 OURCE

-----------------------------------------------------------------------

SCOPE

08/04/90Provided

0CARDNUMBER 1158 DOCUMENT MIL-STD-1472 C

TITLE : Human Engineering Design Criteria for Military Systems


REFERENCES Includes four pages of references to Mil Specs for lighting, soundpressure, et c

ABSTRACT Only useful for design of equipment which will be used by directinteraction with humans, this would include ground support andmission support equipment . Not of relevance to free flyingspacecraft .


----------------- ..--- . . .. ..------ --------------------------------------SCOPE This standard establishes general human engineering design

criteria for military systems, subsystems equipment andfacil .i .ties .

10

08/04/90Provided

•CARDNUMBER 1169 DOCUMENT MIL-HDBK-23 A

TITLE : Structural. Sandwich Composites

AGENCY/AUTH : DOD U .S . & FAA

REFERENCES

ABSTRACT Standarizaticn handbook, used by design engineers .

CLASS Design SOURCE Mil Handbook

----------------------------------------------------------------------SCOPE Mil handbook 23 ha s been pi: e pareca for the use in the des j design of

structural sandwich composite :;, primarily for tii.cfht vc:.al7icl(I ., .:Information presented includes desiqn procedures, fabricationmethods, inspection procedures, and repair techniques for boicl)mi ] .itary and commercial. vehicles, Methods and procedures oI:.hc?rthan those given herein are a :.l .so acceptable>, provided they gi.vc'.romparable results or are properly subtantiated .

08 /04/90Provided

•CARDNUMBER 117 0 DOCUMENT MIL-HDBK-I,7 A

TITLE : Plastics for Aerospace Vehicles

AGENCX/AUTH: DOD U .S . & Faa

REFERENCES

AH.STRACT Standardi.zati.on handbook for design engineers

CLASS Design SOURCE Mil Handboo k

SCOPF' 1 .1 .1 The purpose of this handbook is to (1) provide a

0

standardized bt:s .is acceptable to the Air Force, Navy, the Army andthe T'AA, for the design and constructi . :'.i of fiber reinforcedplastic co :,,posi.tos primarily for aerospace vehicles . (2) toprovide appropriate data on the mechanical prc>pc~rti.cs- of suchcomposite-, and (3) to provide ri.~sicln techniques and analyticalprocedures whicli account for the anisotropy of these comosites andpermit computation of direc:tionat. properties . These designtechniques are provided for guideline purposc:s, and shall not bet.-ont;tru~.ad as rerlui.rerments unless spccifical . .ly identi.f iu.cl in ac.ontract .

0

09/04/9 0

eCA.f2DNUMBER 11 . 7 1 DOCUMENT MIL-STD-152 2

TITLE: Standard General Requirements for Safe Design and Operation


REFERENC FS 4 pages of references

ABSTRACT

C%ASS SOURCE

-------------- -----------------------------------------------âCOF E 1 .1. This standard is to be used for the design of all

pressurized systems for missiles, space vehicles, and groundsupport equipment . The sources for design standards are forreference pulr:posG;, only, and to place the specific designstandard in its proper perspective, 1-11hoi.r_ inclusion in thisdocument does not imply total appl icabi lii:y to any contract onwhich thie, standard may be required unless rr.orau .i_rernentJ arespecifically stated .

-09/04/9a

sCAF!DNUMBER 1 1 72 DOCUMENT MIL-STD-13O F

TITLE : Identification Marking o f US Military Property

AGENCY/AUTH: DOD U .S .

REFERENCES DDD-L-20, MIL-E-1, M :[L-f3°-18, MIL-N-7513, MIL-B-10 1 54, MIL-M-13231,MIL-L-15040, M :I L-N- 1 8307, MIL-E-2 19 8 1 , MIL--M-385 1 0, MIL-P-83497 ,

FED-STD-182, FED-STD-183, FI:U-S'I'I)--184, ï'EU-ST!)-185, MIL-STD-190, M:IL-S7'i)--1168, MIL-STI)--1285, MIL°-S`I'I)-1473 ,

ABSTRACT

CLA SS

-----------------------------

SC)lJE2C:Na

SCOPE 1 .1 This standard provides the item marking requirements aw

meth(.)tls for. identification of items of military property produ<.oc1,

stocked, st:ored and issued by or for the I)opert;ment~ of i)efet7se .

Military items covered by the following documents are excluded

from the provisions of this standard unless otherwise specified in

detail SpeC:: ]. fiGati.o21s, standards, or contract .

09/04/90

0CAFnNUMHER 1173 DOCUMENT MIL-E--8383 8

TITLE : Electronic Eguipment, Aerospace, Extended Space. Environment, Ge n

AGENCY/AUTH :

REFERENCES MIL-M-3171, MIL-B-5087, MIL-C-5541, MIL-N-7513, MIL-S-7742, MIL-A-8625, MII,-V-14072, MIL-N-18307, MIL-C-3899 9 , MIL-C-3 9 012, MIL-M-45202, MIL-Ç-45743, MIL--I-°46058, MIL .-C-55544, MI.L-W-83575, MIL-C-83723, MIL-C-83733, MIL-STD-143, MIL-STD-454, M7L-f3`1 .'C}-81 0 , MIL-STI3-891, MII.,-S7D--151.2, MIL-S`1'1J-1539 ,

ABSTRACT

CLASS SOURC E

SCOPE 1 .1 This speci.fi.c:atiori sets forth the ~,4ener_a]. reciuiremenk:s forthe ri e ._,iqn and manufacture of Gl.ect.ron .i.c equipment for urimatanecispace vehicles . The detailed performance, and individual 1-lestreclu ï.rements shall be as specified in the equi.prrrr :r7tor che e:ontrac: k .

09/04/9 0

ECARDNÜMSER 1174 DOCUMENT MIL-F-833,4 2

TITLE< Forg~.ng, Titanium Alloys, for Aircraft and Aerospace Applicatio n

AGENCY/ AUTH :

REFERENC ES MIL-I-6866, MIL-I--8950,MIL-T-9047, MIL-H--81200

ABSTRACT

CLASS SOURCE

------------------------------------------------------------

SCOPI; 1 .1 This speci fTicai:ion covcr .: unalloynd ti .f~anit,ni and titanl .u ;iialloy fc,rgings :stditakale for aircraft and aerospace components .

1,

09/04/9 0

•CARDNUMBER 1175 DOCUMENT MIL-I`-7190I3

TITLE: Forgings, steel, for Aircraft/Aerospace Equipment and Specia l

AGENCY/AUTH :

REFERENCES MIL-H-6875, FES-STD-151, MIL-STD-163, MIL-STD-183, MIL-STD-1949, M

IL-STD-686 6

Ak3STRACT

CLASS SOUR C E

-_- ._------------------------------------------------------ -_

SCOI'E 1 . 1 This specif ic.at ion c.nvers steel fcax°rlinq s suitable for usein the construction of aircraft/aerospace equipment, specialordnance, and related accessories .

CARDNUMBER 1176 DO CUMENT MIL-M-38510 F

TITLE: Military Specificati.crn, Microcircuits, General . Spec . for

AGENCY/AUTH :

REFERENCES MIL-M-55565, FED-STD- 209, FED-STD-595, MIL-STD-129, MIL-STD -280, MIL-STD883, MIL-STD-976, MIL-STD 1331, MIL-STD-4566 2

ABSTRAC T

C: LA :3 S SC.)UI2C E

-----------------------------------------

SC;OPL 1 .I. 'Phis specification establishes the gencr.al requirementsfor monolithic, multichip, and hybrid microcircuits and the

qua].ity and reà.iabi .lity assux-~ance xequiremc.nts which rntast be motin the, acquisition of microcircuits . Dct_ai1 rcquircricrits, spc:e:iiict.;hi3l"i:1C;1:. .E?rl sl .t :i c :i of, microcircuits, and other provision .,.:; which aresensitive to the particular use intended shall be specified in theapp1ic:able device spec.ifâ.cation . Multiple levels of productasstdrnzace requirements and control are provided for in i.hiu,speci :E icat .i.on

09/04/90-

•CARDNUI4BER 117 7

TITLE: Test Requirements for Space Vehicle s


REFERENCES MIL-STb-810, MIL-STD-1 .541

ABSTRACT

CLASS SOURCE

DOCUMENT MIL-STD-1540A

------------------------------------------- ----------

SCOPE 1 .1 This standard provides uniform definitions, criteri .a, andriencral 7_°ocla_iromrbnts for a space vehicle ground test program . Whenthese test rociuirc*mc.ntn are incorporated in detailed test plansfor particular space vehicles, a high level of confidence inacha.eving succ.o ;; :;ful space missions can be esta}7 .l.â. .>hecl .

09/04/9 0

0CARDNUMBER 1178 DOCUMENT MIL-aTD-810 D

TITLE: EnvirnnmenCa] Test Methods and Engineering Guidelines


REFERENCES MIL-S-901, MIL-STD-167, MIL-STD-210,MIL-STD-781, MIL-STD-1165, MIL-STD-1540, MIL-STD-1670, MIL-STD-4566 2

ABSTRACT

CLASS :sOt .JRC Y.

SCOPE

09/04/9 0

0CARDNUMBER 118 0


DOCUMENT MIL-S-0045743 D

TITLE: Soderir.g, Manual type, High Reliability, Elect . & Electro . Equip

AGENCY/AUTH »

REFERENCES QQ-S-571, P4IL-F-14255, MIL-P-23809,MIL-P-46843, MIL-STD-202, MIL-S

TD-42 9

ABSTRACT

CL,AS S ::ï QURCi:

-------------------------------------------------------------SCOP£' 1.1 'I'h .ts ;,,pecrii:ic::<At,.ion covers :olderinq, high reliability

electrical and electronic c.onnecticnc, with rilaniml- ecalderinqapparatus as applicable to quided mi :~ :> .il.cs and certain aerospaceequipment requiring applicable to general soldering rcaquirement:s .

©9/04/9 0

0CARDNUMBER 1181 DOCUMENT MIL-S'(.'D-454K

TITLE: Standard Genera7. Requirements for Electronic Equipment


REFERENCES MIL-I-983, MIL-E-4158, MIL-E-5400, MIL-E-8189, MIL-E - 8983, MIL-P-112 6 8, MIL-E-11991, MIL-E-16400, MIL-F-19870, MIL--T-21200, MIL-T-28800, FAA-G-210 0

ABSTRACT

CLASS SO11RCE

SCOPE

---------------------------------------------------------------

1. . 1 This standard co v~.~_- s the common r eqt?i.r. e :ne n ts to be u sed .inmilitary specifications for electronic equipment .

09/04/9 0

0CARDNUMBER 1182 DOCUMENT MIL-STD-1246A

TITLE : Product Cleanlines :s Levels and c.'ontamirtitvion Control Prograrr


REFERENCES ;ED-°TD-209 . ASTM-F-24, ASTM-F-25, ASTM-D-2390, ASTM-D-2391, A,,TM-D-2429, ASTM--D-2544,SAE--ARP-598, SkE-_?iRF' .-74 3

ABSTRACT

CLASS SOURCE

--------------------- ---------------------------------------SC:7PE 1 . 1 This standard provides a basis and a unifor.-an method

spec,ifyin<<f product, c:leanlâness levols and contamination c°ont;z•ralprogram x c;qu i r emenl.s .

09/04/9 0

0GARDNUMBFR 11 83 DOCUMENT MIL-STD-151 5

TITLE: Fastener Systems for Aerospace Application s


REFERENCES MS17855

AF3STRACT

C.Ï,AS S

SC'C)P !

SOURCE

------------------------------------------------1 .1 This standard covers the methods of fastening, materials,finishes, test methods, and hole size and criteria of fastenersand fastening systems used in the design and construction ofacrospacc system . In addition, it pr.rav .i.des a comprehensiveprcsE:ot;ation of approved engineering practices, procedures,processes, and characteristics for fasteners .

09/04/9 0

0

CARDNUMBER 1184DOCUMENT MIL-STD-470A

TITLE : Maintainability Program for Systems & Equipment


REFERENCES MI L- S`,:'D-280, MIL-STD-471, MIL-STD-721, MIL-STD--785, MIL-STD-1388,

MIL-STD-1629, MIL-HDBK-47 2

ABSTRACT

CLASS SOURCE

------ ---------------------..--------

SCOPE 1 .1 This standard prcvides task descriptions for

maintainability programs . The Tasks, as tailored, will be applied

to systems and equipment development, acquisitions and

modifications . Software maintainability is not covered by this

standard .

09/04/90

CARDNUMBER 1185 DOCUMENT MIL-P-9024 G

TITLE: Packaging, Handling, and Transportability in System/Equip Acqui s

AGENCY/AUTH :

REFERENCES 3 pages

ABSTRACT

CLASS SOURC E

---------------------------------------------------- - ----------- ..---SCOPE 1 .1 This specification establishes packaging, materials

handling, and transportability requirements and criteria foracquisition of systems and equipment . It requires an interfacebetween these functions and the system engineering managementprocess as set forth in MIL-STD-499 and related configurationmanagement requirements contained in the applicable MIS-STD-480Jeries directives and MIL-STD-490 .

09/04/9 0

•CARDNUMBER 1.186 DOCUMENT MIL-T-28800 D

TITLE : Test Equipment for use with Elect . and Electro . Equipment

AGENCY/AUTH :

REFERENCES 3 pages of references

ABSTRACT

CLASS SOURCE

------------------------ ..-------------------------------------------

SCOPE 1 .1 This specification covers the general requirements fortest equipment, hereinafter referred to as the test equipment,(see 6 .4 .2 .15) used in testing electrical and electronicequipment . The test equipment may be of Military or commercial

design and includes general purpose, special purpose, peculiar,console mounted, and automatic test equipment (ATE) . Thisspecification should also be used for built-in test equipment(BITE) ( see 6 .4 .2 .6) when the requirements for built-in test (BIT)( see 6 .4 .2 .5) are not included in the system specification .

~ Detailed requirements for a particular test equipment should be

tailored in a detail specification for that equipment as specified

in 6 .5 (see 6 .4 .2 .12) .

09/04/9 0

0CARDNUMBER 11 .87 DOCUMENT MIL-STD-1653 A

TITLE : Power Cable Assenblies

AGENCY/AUTH :

REFERENCES W-C-596, MIL-C-3432, MIL-C-28777/5, MIL-T-28800, MS2548, MS3102, M

S3106, MS3107, MS3436, MS3507, MS9038 4

ABSTRACT

CLASS SOURCE

-----------------------------------------------------------------------SCOPE 1 .1 This standard specifies the configuration requirements of

input power cable assemblies for Organizational (f lightline) andIntermediate (shop) electronic test equipment, classified as TypeI in MIL-T-28800, and rated up to 10 amperes . It also shows therelevant connections for thest equipment and power sourcereceptacles .

0

09/04/90

CARDNUMBER 1 2,88 DOCUMENT MIL-STD-154 3

TITLE: Reliability Program Requirments for Space Missile Systems


REFERENCES MIL-Q-9858, MIL-STD-280, MIL-STD-480, MIL-STD-721, MIL-STD-756, MI

L-STD-891, MIL-HDBK-21 7

ABSTRACT

CLASS SOURCE

--------------------------------------- - ------- I ----------- ..--------

SCOPE 1 .1 This standard establishes uniform reliability programpractices and procedures for use during design, development,fabrication, test and operation of space and missile systems .

0

09/04/9 0

•CARDNUMBER 1189 DOCUMENT MIL-S-8512 D

TITLE : Support Equipment, Aeronautical, Special General Spec . for Desig

AGENCY/AUTH :

REFERENCES 3 pages

ABSTRACT

CLASS SOURCE

---------------------------SCORE 1 .1 This specification covers general requirements for design

and construction of ground support equipment and provisions to beincorporated in detail specifications for specific items o fequipment .

09/04/9 0

0CARDNUMBER 1190 DOCUMENT MIL-M-3831 0

TITLE: Mass Properties Control Requir . for Missile and Space Vehicle s

AGENCY/AUTH :

REFERENCES MIL-P-116

ABSTRACT

CLASS SOURC E

--------------------------------------------------------------------

SCOPE 1 .1 This document establishes a system for the management ofmass properies during procurement and use of surface-to-surfaceballistic vehicles and space vehicles, or portions thereof . It isdesigned to permit the acquisition of systematized, verifiable andcontrollable mass properties of vehicle systems, to facilitaterapid establishment and reporting of inputs for theweight/performance relationship, and to enable parametricextrapolation from the reported systems to newly evolving systems .

09/04/9 0

0CARDNUMBER 119 1

TITLE : Parts Control Program


REFERENCES

ABSTRACT

CLASS

DOCUMENT MIL-STD-965 A

SOURCE

-------- -------------------------------------------------------------SCOPE 1 .1 The purpose of this standard is to establish the

guidelines and requirements for implementation of a parts controlprogram .

09/04/9 0

.̂ARDNUMHER 1192 DOCUMENT MIL-STD-785 B

TITLE : Reliability Program for Systems and Equipment Develop . & Product


REFERENCES MIL-STD-105, MIL-STD-721, MIL-STD-781, MIL-STD-965, MIL-STD-785B,MIL-HDBK-217

ABSTRACT

CLASS SOURCE

---------------------------------------------------------------------

SCOPE 1 .1 This standard provides general requirements and specifictasks for reliability programs during the development, production,and initial deployment of systems and equipment .

0

09/04/9 0

0CARDNUMBER 119 3

TITLE : Interface Control Document

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT P87-B

SOURCE

----------------- ..- ..---------------------------------------------- ..--

SCOPE 1 .1 This Interface Control document (ICD) dWfines th einterface between the Experiment designated as the TBD and theP87-B Space System during both the ground operations and theflight mission . Mechanical and Electrical interface details arespecified in the Mechanical Interface Control Drawing (MICD) andElectrical Interface Control Drawing (EICD) respectively .Supporting agreements and hardware and data schedules arecontained in Appendix 1 . It is intended that these dates andlanguage commitments be implemented as stated . To the extent that

~ Appendix 1 is in conflict with existing contracts, the contractsshall control and problems arising from these conflicts shall besettled by subsequent agreemei,ts between the sponsoring USAF' andcontracting agencies .

09/04/9 0

0CARDNUMBER 1194 DOCUMENT SS-GYS-101 B

TITLE : System Specification for the Navstar Global Positioning System

AGENCY/AUTH :

REFERENCES SS-SVS-101A, SS-US-101B, SS-CS-101B, MIL-STD-130D,

ABSTRACT

CLASS SOURCE

---------------------------------------------------------- ..----------SCOPE 1 .1 This specification establishes the performance, design,

development and test requirements for the Global PositioningSystem (GPS) Phase 1 .

09/04/9 0

•CARDNUMBER 1195 DOCUMENT YEN `78-31 2

TITLE: Design Requirements for the Phase III Space Segment of the NAVST

AGENCY/AUTH :

REFERENCES 5 pages

ABSTRACT

CLASS SOURCE

--------------- ..-J---------------- ----..--------------------------- ----SCOPE 1 .1 This specification establishes the performance design ,

development, test, production and orbital requirments for thespace segment of the Navstar Globla Positioning System (GPS) .

•

09/04/9 0

•CARDNUMBER 119 6

TITLE: SATSAT PA Program

AGENCY/AUTH :

REFERENCES 2 Pages

ABSTRACT

CLASS

DOCUMENT 80070 3

SOURCE SPAR

_-------------- ..---° .------------------------------------------..-------

SCOPE 1 .1 This document describes the product assurance program

implemented by Spar Aerospace Ltd . Satellite and Aerospace System s

ï:ivision (S&ASD), for the control of quality during theprocurement, manufacturing, test and preparation for delivery and

also during design modification phases of the SARSAT Follow-on

Production (FOP) project . It is designed to meet the intent of,

and be consistent with, accepted quality assurance specifications

such as NASA Publication NHB 5300 .4 (1B) Quality Program

Provisions for Aeronautical and space system Contractors .

09/04/9 0

eCARDNUMBER 1197

TITLE : SPAR PA Program

AGENCY/AUTH :

DOCUMENT 81025 0

REFERENCES MIL-STD-105D, MIL-STD-202F, MIL-HDBK-217E, MIL-STD-750C, MIL-STD-883C, 811161, 811162, ANSI-ASTM STD .E595-84, NHB-5300 .4,MIL-S-19500G, MIL-M-38510F, AFETRM 127- 1

ABSTRAC T

CLASS SOURCE SPAR

-----------------------------------------------------------------------SCOPE

09/04/9 0

0CARDNUMBER 17 .98 DOCUMENT 227265 4

TITLE : Electromagnetic Interference (EMI) Requirments Specification

AGENCY /AtTTH :

REFERENCES MIL-STD-461B, MIL-STD-462

ABSTRACT

CLASS SOURCE RCA

SCOPE 1 .0 This specification establishes the EMI requirements-applicable to the protoflight components of RCA Communicationspacecraft . These EMI requirements shall be used as the basis forthe EMI test program to be performed at the component level .

09/04/90

0CARDNUMBER 1199 DOCUMENT 230396 4

TITLE : Subcontractors Product Assurance Requir . for a Comm . Satellite

AGENCY/AUTH :

REFERENCES MSFC-HDBK-527D/JSC 09604, MSFC-SPEC-522, MSFC-SPEC-250, ASTM-E-595-83, MSFC-STD-506, JSC 18327, NHB 8060 .1, MSFC-STD-355, MIL-STD-202, MIL-STD-750, MIL-STD-883, MIL-STD-490, MIL-STD-975, MIL-M-38510, MIL-S-19500, MIL-STD-1520, MIL-HDBK-5, MIL-T-27, MIL-STD-129, MIL-C-3098, MIL-R-6106, MIL-F-23419, MIL-R-39016, MIL-HDBK-21 7

ABSTRACT

CLASS SOURCE RCA

SCOEE 1 .1 This-document-specifies the-subcontractor-Product---Assurance requirements for a communication satellite program .Emphasis is placed on subcontractor implemertation of existinghigh reliability, long life space hardware program control . TheSubcontractor shall provide the data and planning documents listedin Table 1 as part of the product assurance proposal response .

09/04/9 0


TITLE : Quality Assurance Program Plan for a Communication Satellite Pro

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE RCA

------..----------------------- ..---------------- ..--------------------SCOPE 1 .1 This Quality Assurance (QA) Program Plan describes

procedures and practices RCA will employ to assure compliance withcontract quality requirements for a Communication SatelliteProgram . RCA emphasizes defect prevention and controls qualitythroughout all phases of contract performance . Provision is madefor prompt corrective and preventive actions when deficiencies ornonconformances appear imminent or are discovered .

09/04/9 0

•CARDNUMBER 1 ;01 DOCUMENT 230836 9

TITLE: Reliability Program Plan for Communication Satellite Programs

AGENCY/AUTH :

REFERENCES MIL-HDBK-217, MIL-STD-721, MIL-Q--9858,

ABSTRACT

CLASS SOURCE RCA

------------------------ ..------------------------------------ -------SCOPE 1 .1 This Reliability Program Plan establishes the detailed

requirements and methods of implementation for a comprehensivereliability program. It is part of a total Product AssuranceProgram and provides reliability objectives and controls ofdesign, development, manufacture, and test of Contract End Item(CEI) equipments .

09/04/90


TITLE : Parts, Materials, and Processes Program Plan for Comm . Satellite

AGENCY/AUTH :

REFERENCES MSFC-SPEC-522A, MSFC-SPEC-250A, MSFC-HDBK-527D/, JSC 20810, MSFC-STD-506B, NHB 8060 .18

ABSTRACT

CLASS SOURCE RCA

------------------------------------------------------..--------------SCOPE

09/04/9 0

0CARDNUNiBER 1203

wDOCUMENT 230837 5

TITLE: software Quality Assurance Plan for a Comm . Satellite Program

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE RCA

SCOPE 1 .0 This SoftwareyQuality-

Assurance~Program~(SQAP)~isapplicable to all computer software, as stated herein, which isdeveloped, modifed, or acquired for use on a communicationsatellite program . The SQAP is applicable throughout all phases ofthe project from preproposal planning to contract completion .

0

09/04/9 0


TITLE: Configuration Management Plan for Communication Satellite Progra

AGENCY/AUTH :

REFERENCES DOD-D-1000A, MIL-S-83490, MIL-STD-100, DOD-D-480A

ABSTRACT

CLASS SOURCE RCA

------------------------------------------------------------------SCOPE 1 .1 This configuration

-

management plan statesWhow the-

RCAProject Management Office (PMO) will use configuration managementdisciplines to accomplish the program objectives .

0

09/04/9 0

•CARDNUMBER 1205 DOCUMENT 262902 6

TITLE : System Safety Plan for Anik E Bus Subsystem

AGENCY/AUTH :

REFERENCES MIL-STD-454J, JSC 13830A

ABSTRACT

CLASS SOURCE RCA

--- ..----------------------------------------------------------------SCOPE 1 .1 This plan reflects the guidance and practices of RCA

product Assurance and System Safety management and OperatingInstructions as applied to the Anik E Program .

09/04/9 0

0CARDNUMBER 120 6

TITLE : Anik E Data Management Pla n

AGENCY/AUTH :

REFERENCES 2308775, 810211

ABSTRACT

CLASS

DOCUMENT 262902 7

SOURCE RCA

--------------------------------------- ..----------------------------SCOPE 1 .0 This plan identifies the policies and procedures to be

utilized for anik E data management . The documentation to besubmitted and the submission schedules for the various data itemsare as set forth in the Statement of Work, SPAR Aerospace Limiteddocument No . 810211, Appendix D, the issues in effect at the timeof Contract signing .

10/04/90

•CARDNUMBER 1207

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT MIL-C-8372 3

SOURCE

------------ ..------ .»------------------------------- ..- ..------------ ..-SCOPE

10/04/9 0

•CARDNUMBER 1208 DOCUMENT MIL-A-83577 B

TITLE: Assemblies, Moving Mechancial, for Space and Launch Vehicle s

AGENCY/AUTH :

REFERENCES 4 pages

ABSTRACT

CLASS SOURCE

--------------------------------------------------------------------SCOPE 1 .1 This specification sets forth he general requirements for

the design, manufacture, quality control, and testing of movingmechancial assemblies to be used on space and launch vehicles .

10/04/9 0

•CARDNUMBER 1209 DOCUMENT MIL-C-5541D

TITLE : Chemical Conversion Coatings on Aluminum and Aluminum Alloys

AGENCY/AUTH :

REFERENCES MIL-P-23377, MIL-C-81706, MIL-P-85582, FED-STD-141

ABSTRACT

CLASS SOURCE

-----..-------------------------------------------------- - ------------SCOPE 1 .1 This specification covers the requirements for two classe s

of chemical conversion coatings formed by the reaction of chemicalconversion materials and the sufaces of aluminum and aluminumalloys . This specification is intended specifically to providecomponents of military weapon systems with maximum corrosionresistance . The coating also provides a surface having betterpaint adhesion than uncoated aluminum . It is not intended as ageneral purpose coating for commercial and decorativeapplications, (see 6 .1) .

10/04/90

CARDNUMBER 1 21 0

TITLE : Electromagnetic ( radiated)

AG3ENCX / AUTH ~

DOCUMENT MIL-HDBK-235 1A

REFERENCES MIL-STD-461, MIL-STD-463, MIL-STD-1385, MIL-STD-1512, MIL-HDBK-235PART 2, MIL-HDBK-235 PART 3, MIL-HDBK-234 PART 4, MIL-HDBK-237, MIL-HDBK-253, AFSC DH1-4, AFSC DH2- 7

ABSTRACT

CLASS SOURCE

----------..---------------------------------------- ..-..--------------SCOPE 1 .1 The intent of this handbook is to provide guidance and

establish a uniform approach for the protection of militaryelectronics from the adverse effects of the electromagneticenvironment . The handbook is applicable to any electrical andelectronic equipment, subsystem or system which may be exposed toan electr,-,magnetic environment during its life cycle .

10/04/9 0

eCARDNUMBER 1211 DOCUMENT DOD-E-83578 A

TITLE: Explosive Ordnance for Space Vehicles (metric)

AGENCY/AUTH :

REFERENCES QQ-N-290, QQ-C-320, MIL-M-3171, MIL-C-5541, MIL-H-6088, MIL-H-6875, MIL-F-7179, MIL-S-7742, MIL-A-8625, MIL-S-8879, MIL-S-13572, MIL-C-26074, MIL-M-45202, MIL-H-81200, MIL-STD-29, MIL-STD-889, MIL-STD-1167, HIL-STD-1168, MIL-STD-1246, MIL-STD-1515, MIL-STD-1540, MIL-STD-1568, MIL-STD-1576, MS-3354 0

ABSTRACT

CLASS SOURCE

..-------- ..------..--------------------------..------------------- ..----SCOpE 1 .1 This specification sets forth the general requirements for

the design, manufacture, and testing of explosive ordnance . Therequirements stated in the specification are a composite of thosethat have been found to be cost effet-tive for high reliabilityspace vehicle applications .

10/04/90

0CARDNUMBER 1212 DOCUMENT MIL-STD-237 A

TITLE: Interim Notice EMC (Navy)

AGENCY/AUTH :

REFERENCES MIL-E-6051, MIL-STD-449, MIL-STD-461, MIL-STD-462, MIL-STD-469, MIL-STD-480, MIL-STD-1605, MIL-STD-2169, MIL-HDBK-,23 5

ABSTRACT

CLASS SOURCE

------- ------------------------------ .. ..-------------------------..- ..-SCOPE 1.1 This document is intended to provide managers resposible

for the design, development and acquisition of DOD platforms,system and equipments with the guidance necessary to establish aneffective program for achieving the desired degree of EMC . Thehandbook describes the steps which must be taken to ensure thatEMC considerations are incorporated during the life cycle toachieve the desired compatibility for the life cycle of theplatform, system, or equipment .

10/04/9 0

0CARDNUMBER 121 3

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS SOURCE

DOCUMENT

SCOPE

10/04/9 0

0CARDNUMBER 1214 DOCUMENT DOD-W-83575 A

TITLE : Wiring Harness, Space Vehicle, Design and Testing,

AGENCY/AUTH :

REFERENCES MIL-C-17, MIL-W-5088, MIL-W-5846, MIL-C-24308, MIL-C-38999, MIL-C-39012, MIL-C-55544, MIL-W-81044, MIL-W-81381, MIL-C-83723, MIL-C-83733, MIL-STD-863, MIL-HDBK-21 6

ABSTRACT

CLASS SOURCE

-..------------------------------------------------------------------SCOPE 1 .1 This specification sets forth the general design and

testing requirements for electrical wiring harnesses (see 6 .2 .5)and cable assemblies (see 6 .2 .4) that are to be installed in spacevehicles .

10/04/90

•CARDNUMBER 1215 DOCUMENT MIL-S-8357 6

TITLE : Solar Cell Arrays, Space Vehicle, Design and Testin g

AGENCY/AUTH :

REFERENCES MIL-T-152, MIL-F-7179, MIL-S-45743 ; MIL-C-83443, MIL-W-83575, MIL-STD-130, MIL-STD-143, MIL-STD-454, MIL-STD-889, MIL-STD-891, MIL-STD-1246, MIL-STD-1540, MIL-BU-40 0

ABSTRACT

CLASS SOURCE

---------------•--------------- .. ..-- ..- ..-------------------------------SCOPE 1 .0 This specification establishes the general design,

fabrication, performance, and testing requirements for solar cellpanels (6 .3 .4) and solar cell arrays ((6 .3 .5) to be installed onspace vehicles to convert solar energy into electrical energy aspart of the vehicle electrical system .

10/04/9 0

•CARDNUMBER 121 6

TITLE: Calibration Systems Requirment s


REFERENCES

ABSTRACT

CLASS SOURCE


---------------------------- -------- ..---------------------------------SCOPE 1 .1 This MIL-~~TD provides requirements for the establishmen t

and maintenar.ce of a calibration system to control the accuracy ofmeasuring and test equipment (M&TE) and measurement standards usedto assure that supplies and services delivered to the Governmentcomply with prescribed technical requirements .

10/04/9 0

CARDNUMSER 1.21 7

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS

DOCUMENT

SOURCE

----------------------------------------------------------------------

SCOPE

10/04/90

CARDNUMi3ER 1218 DOCUMENT MIL-STD-975 H

TITLE : NASA Standard Elect, Electronic,and Electromechanical Part List


REFERENCES 6 pages

ABSTRACT

CLASS SOURCE

------------------------------------------- ..------------------------SCOPE 1 .1 This standard establishes a list of Electrical ,

Electronic, and Electromechanical (EEE) Parts for use in theselection, procurement and application for flight andmission-essential ground support equipment .

10/04/9 0

0CARDNUMBER 1220 DOCUMENT MIL-STD-1527A

TITLE: Standard General requirements for safe Design and Operation

AGENCY/AU~.'H :

Ÿ2EFERENCF ..~i MIL-E-6051, MIL-S-8512, MIL-STD-1540, MIL-STD-1472, MIL-HDf3K--5, MIL-HDBK-1 7

ABSTRACT

CLASS SOURCE

-------------------------------------- ..---------------------- .. ..-----

PRECEDIPlG PAG E BLAN K

SCOPE

10/04/9 0

CARDNUMBER 122 1

TITLE :

AGENCY/AUTH :

REFERENCES 7 pages

ABSTRACT

CLASS

DOCUMENT MIL-STD 154 7

SOURCE

------------------------------------------------------------------ ..-SCOPE 1.1 This standard establishes the minimum technical

requirements for electronic parts, materials, and processes usedin the design, development, and fabrication of space and launchvehicles . The term "electronic" is used in a broad sense in thisstandard and includes electrical, electromagnetic,electromechanical, and electro-optical parts associated withelectronic assemblies such as computers, communication equipment,electrical power, guidance, instrumentation, and space vehicles .The following categories of information are provided in thestandard for use by the circuit designer, part specialists,material specialists, process specialists, and reliabilityengineers .

10/04/90

0CARDNUMBER 122 2

TITLE :

AGENCY/AUTH :

REFERENCES

ABSTRACT

CLASS


SOURCE

----------------------- .. ..------------------- ..--------------..--------SCOPE 1 .1 This standard establishes the requirements for materials ,

processes and techniques, and identifies the tasks required toimplement an effective corrosion prevention and control programduring the conceptual, validation, development and productionphases of aerospace weapon systems . The intent is to minimize lifecycle cost due to corrosion and to obtain improved reliability .

10/04/9 0


TITLE : Grounding, Bonding, and Shielding for Electronic Equip . and Fac i


REFERENCES

ABSTRACT

CLASS SOURCE

------ ..-----.--------------------------------------------------------

SCOPE

10/04/90


TITLE : Electroexplosive Subsystem safety Requirements & Test Methods

AGENCY/AUTH :

REFERENCES QQ-B-575, DOD-E-8983, DOD-E-83578, FED-STD-228, FED-STD-595, MIL-STD-202, MIL-STD-410, MIL-STD-453, MIL-STD-1167, MIL-STD-1168, MIL-STD-1512, MIL-STD-1546, MIL-STD--1547, DOD-5154 .4S, DODADL-TD-3, AFTO-11A-1-4 7

ABSTRACT

CLASS SOURCE

SCOPE 1 .1 The pupo.,e of this document is to insure the safety-o f- -personnel, launch site facilities, and space vehicles from thehazards resulting from electroexplosive subsystem unintentionalinitiation or failure to fire . The requirements and *est methodscontained in this document are not intended to insure al lelectroexplosive subsystem performance requirements except inthose cases where failure to perform would create a hazard to theitems listed above . The electroexplosive subsystem is composed ofall components from the power source to, and including, the EED(Electroexplosive device) ; Safe and Arm devices, Arm/Disarmswitches, relays and all electrical wiring used to monitor,control arm, and fire ordnance are specifically included . Thisstandard applies to all space vehicle systems (e .g ., launchvehicles, upper stages, boosters, payloads, and related systemsusing EED's)

10/04/90


TITLE : Standard & Specifications, Order of Preference for the Selection


REFERENCES MIL-STD-490, MIL-STD-961, MIL-STD-962

ABSTRACT

Cu 5S SOURCE

--------------------------------------------------------------------SCOPE 1 .1 This standard sets forth the order to preference for the

selection of standard and specifications used in the design,acquisition, construction and support of material for theDepartment of Defense in compliance with the Office of Managementand Budget (OMB) Circular A-119 on using commercial practices andnon-Government standards .

10/04/9 0

•CARDNUMBER 1226 DOCUMENT MIL-STD-109

TITLE : Quality Assurance Terms and Definitions


REFERENCES

ABSTRACT

CLASS SOURCE

--------- ..-----------------------_-----------------------------------SCOPE This document provides a standardized interpretation of quality

assurance terms and definitions to be applied throughout theproduct quality .

10/04/9 0

0CARDNUMBER 1227 DOCUMENT MIL-C-8344 3

TITLE : Cells, Solar, Silicon

AGENCY/AUTH :

REFERENCES MIL-S-3464, MIL-S-19500, MIL-F-22191., MIL-S-45743, FED-STD-147

ABSTRACT

CLASS SOURCE

-------------------------------------------- ..-----------------------SCOPE 1 .1 This specification covers the general requirements for

silicon solar calls with transparent covers (see 6 .1) .

10/04/9 0


TITLE : Guidance for the Design and Test System Protected Against th e

AGENCY / AiJTH :

REFERENCES MIL-B-5087, MIL-E-6051, MIL-STD-220, MIL-STD-285, MIL-STD-461, MIL-STD-462, MIL-STD-463, MIL-STD-1310, MIL-STD-1377, MIL-STD-1385, MIL-HDBK-235, MIL-HDBK-23 7

ABSTRACT

CLASS SOURCE

SCOPE 1 .1 The purpose of this document is to provide programmanagers with guidance for the design and test of electronicsystems which are to be immune to the detrimental effects ofelectromagnetic energy .

10/04/9 0

isCARDNUMBER 1229 DOCUMENT MIL-HDBK-24 1

TITLE: Design Guide for Electromagnetic Interference (EMI) Reduction in

AGENCY/AUTH :

REFERENCES MIL-T-27, MIL-E-16400, MIL-F-18870, MIL-T-28800, MIL-STD-461, MIL-STD-463, MIL-STD-785, MIL-STD-139 9

ABSTRACT

CLASS SOURCE

---- ---------------------- ..------- ..-----_.---------------------------

SCOPE 1 .1 This handbook offers guidance to power supply designers intechniques which have been found effective in reducing conductedand radiated interference generated by power supplies . It is acompilation of information from library sources, pertinentmilitary laboratory programs including contracts to universitiesand industry, and practical fixes derived from the experience ofengineers .

0

10/04/90

.CARDNUMBER 1230 DOCUMENT MIL-STD-463

TITLE : Definitions & Sytems of Units, Electromagnetic Interference

AGENCY/AUTH :

REFERENCES MIL-B-5087(ASG), MIL-STD--188-120, MIL-STD-285, MIL-HDBK-216

ABSTRACT

CLASS SOURCE

------------------------------------- ----------------------------------SCOPE 1.1 This standard is designed to assist in reaching a more

common understanding of the meaning of terms used in the variousmilitary standards which provide a basis for assuringelectromagnetic compatibility within the operational militaryenvironment . Definitions of terms and abbreviations are limited tostatements of meaning related to this and applicable standards,rather than encyclopedia or text book discussions .

10/04/9 0

sCARDNUMBER 1231 DOCUMENT MIL-STD-48 0

TITLE : Configuration Control-Engineering Changes, Deviations and Waiver

AGENCY / AUTH :

REFERENCES MIL-STD-109, MIL-STD-280, MIL-STD-483, MIL-STD-490, MIL-STD-882, MIL-STD-1388-1, MIL-STD-1388-2, MIL-STD-1520, MIL-STD-1521, MIL-STD-216 7

ABSTRACT

CLASS SCURCE

------------------------------------------------- ..----------------- -SCOPE 1 .1 This standard establishes the requirements, formats, and

procedures to be utilized in the preparation of configurationcontrol documentation .

10/04/9 0

0CARDNUMBER 123 2

TITLE: Radio Metric and Orbit Data

AGENCY/AUTH :

DOCUMENT CCSDS 501 .0-B- 1

REFERENCES (1) "Procedures Manual for the Consultative Committee for SpaceData Systems", Issue 1, Consultative Committee for Space DataSystem, August 1985 or later issue .

[2] "Introduction of the Improved IAU System of AstronomicalConstants, Time Scale, and Reference Frames into the AstronauticalAlmanac",Supplement to the Astronomical Almanac 1984, U .S .Government Printing Office, Washington, D .C ., 1983 .

[3] "Time Code Formats", Recommendation CCSDS 301 .0-B-1, Issue 1,Blue Book, Consultative Committee for Space Data Systems, January1987 or later issue .

The latest issues of CCSDS documents m&y be obtained from theCCSDS Secretariat at the address indicated on page i .

~,ABSTRACT

CLASS SOURCE CCSDS

-------------- . . ..-- .. ..-----..-..---------------------------------------- ..SCOPE 1 .1 The purpose of this document is to establish common

recommendations for adequately exchanging data involved in orbitcomputation (extrapolation, reconstitution, . . .) to providecross-support among missions and facilities of member Agencies ofthe Consultative Committee for Space Data Systems (CCSDS) . Inaddition, it provides focusing for the development ofmulti-mission support capabilities within the respective Agenciesto eliminate the need for arbitrary, unique capabilities for eachmission .

The topic areas to be covered include radio metric data,spacecraft orbital elements, solar systems epbemerides, trackingstation lo^ations, astrometric data, reference systems,astrodynamic constants, and spacecraft dynamic parameters . Theseparameters define the scope of the panel activities, and allshould deal explicitly with the technical definitions andconventions associated with inter-agency cross-support involvingthe transfer of orbital elements and ground-based conventionalradio metric data, i .e ., doppler and range .

10/04/90

eCARDNUMBER 1233 DOCUMENT CCSDS 301 .0-B- 1

TITLE : Time Code Formats

AGENCY/AUTH :

RFFERENCES [1] "Procedures Manual for the Consultative Committee for SpaceData Systems", Issue 1, Consultative Committee for Space DataSystems, August 1985 or later Issue .

[2] Bureau International de l'Heure Annual Report . Available fromMonsieur le Directeur, Bureau International de l'Heure, 61 Avenuede l'Observatoire, 75014 Paris, France, Also available from :Superintendent, U .S . Naval Observatory, Time Service Division,Washington, D .C . 20390 .

[3] Bureau International de l'Heure Circular D, Monthly Report .Available from Monsieur le Directeur, Bureau International del'Heure, 61 Avenue de l'Observatoire, 75014 Paris, France . Canalso be requested as Time Service Publication Series 15 from :Superintendent, U .S . Naval Observatory, Time Service Division,Washington, D .C . 2039 0

[4] Recommendations and Reports of the CCIR, XVth plenaryAssembly, Geneva 1982, Vol . VII : Standard Fre;uencies and Time, asmodified in 1983 and 1985, or later issue .

[5] "SI units and recommendations for the use of their multiples

and of certain other units :, International Standard ISO 1000,International Organization for Standardization, second edition,

1981 .

The latest issue of CCSDS documents may be obtained from the CCSDSSecretariat at the address indicated on page I .

ABSTRACT

CLASS SOURCE CCSDS

------------..-------------------------------------------------------

SCOPE 1 .2 Time codes are digital representations of timeinformation . Three standard CCSDS-Recommended time codes aredescribed (one"unsegmented" and two "segmented" codes) which usethe international standard second as the fundamental unit of time .

10/04/9 0

®CARDNUMBER 1234 DOCUMENT CCSDS 102 .0-B-2

TITLE : Packet Telemetry

AGENCY/AUTH :

REFERENCES [1] "Procedures Manual for the Consultative Committee for SpaceData Systems :, Issue 1, Consultative Committee for Space DataSystem, August 1985 or later issue .

L 2] "Telemetry Channel Coding", recommendation CCSDS 101 .0-B-2,Issue 2, Blue Book, Consultative Corunittee for Space Data Systems,January 1987 or later issue .

[3] "Telecommand, Part 2 : Data Routing Service, ArchitecturalSpecification", Recommendation CCSDS 202 .0-B-1, Issue 1, BlueBook, Consultative Committee for Space Data Systems, January1987 or later issue .

[4] "Telemetry : Concept and Rationale", CCSDS 100 .0-G-1, Issue 1Green Book, Consultative Committee for Space Data Systems 1987 orlater issue .

The latest issues of these documents may be obtained from theCCSDS Secret.ariat at the address indicated on page i .

ABSTRACT

CLASS SOURCE CCSDS

--------------------------------------------------------------------SCOPE 1 .2 Packet Telemetry is a concept which facilitates the

transmission of space-acquired data from source to user in astandardized and highly automated manner . Packet Telemetryprovides a mechanism for implementing common data structures andprotocols which may enhance the developments and operation ofspace mission systems .

10/04/9 0

•CARDNUMBER 1235 DOCUMENT CCSDS 101 .0-B-2

TITLE : Telemetry Channel Codin g

AGENCY/AUTH :

REFERENCES [1] "Procedures Manual for the Consultative Committee for SpaceData Systems", Issue 1, Consultative Committee for Space DataSystems, August 1985 or later issue .

[2] Tracking and Data Relay Satellite System (TDRSS) User'sGuide, GSFC STDN 101 .2, Rev . 5, ' NASA-Goddard Space Flight Centre,Greenbelt, Maryland, September 1984 .

[3] "Packet Telemetry", Recommendation CCSDS 102 .0-B-2, Issue 2,

Blue Book, Consultative Committee for Space Data Systems, January

1987 or later issue .

[4] Perlman M ., and Lee, J ., Reed-Solomon Encoders - Conventional

vs . Berlekamp's Architecture, JPL Publication 82-71, NASA-JetPropulsion Laboratory, T'asadena, California, December 1, 1982 .

[5] "Telemetry Concept and Rationale", CCSDS 100 .0-G-1, Issue 1,Green Book, Consultative Committee for Space Data Systems, January1987 or later issue .

The latest issues of the CCSDS documents may be obtained from theCCSDS Secretariat at the address indicated on page i .

ABSTRACT

CLASS SOURCE CCSDS

---..- .»-.. ..-..- .. .» .. ..----------------------------------------------------SCOPE 1 .2 Several space telemetry channel coding schemes are

described in this document . The characteristics of the codes arespecified only to the extent necessary to ensure interoperabilityand cross-support . The specification does not attempt to quantifythe relative coding gain or the merits of each approach discussed,nor the design requirements for encoders or decoders . Someperformance information is include in Referenc [5] .

CARDNUMBER 1236 DOCUMENT CCSDS 201 .0-B- 1

TITLE : Part 1 Channel Service Architectural Specification

AGENCY/AUTH :

REFERENCES [1] "Procedures Manual for the Consultative for Space Dat aSystems", Issue 1, Consultative Committee for Space Data Systems,August 1985 or later issue .

(2) "Telecommand, Summary of Concept and Service",CCSDS200 .0-G-6, Issue 6, Green Book, Consultative Committee forSpace Data Systems, January 1987 or later issue .

[3] "Telecommand, Part 3 : Data Management Service, ArchitecturalDefinition", recommendation CCSDS 203 .0-B-1, Issue 1 Blue Book,Consultative Committee for Space Data Systems, January 1987 orlater issue .

(4) "Telecommand, Part 2 : Data Routing Service, ArchitecturalSpecification", Recommendation CCSDS 202 .0-B-1, Issue 1, BlueBook, consultative Committe for Space Data Systems, January 1987or later issue .

[5] "RF and Modulation", Recommendation CCSDS 401, Blue Book,Consultative Committee for Space Data Systems, January 1987 orlater issue .

ABSTRACT

CLASS SOURCE CCSDS

--------------------------------------------- -----------------------SCOPE 1 .1 The purpose of this document is to establish a common

recommendation ehich defines the systems architecture of aspacecraft telecommand"Channel Service" . the intent of thisarchitecture is to provice a common framework within whichAgencies participating in the Consultative Committee for SpaceData Systems (CCSDS) may implement compatible future spacecrafttelecommanding systems .

This recommendation primarily addresses the data unit formats andfunctions which are implemented within the Coding layer and thePhysical layer of the CCSDS telecommand Channel Service . The

(6) "CCSDS System Description, Volume 1 : Recommended Interfacesand Access Points," Issue 0, Green Book, Consultative Committeefor Space Data Systems, January 1986 or later issue .

The latest issues of these documents may be obtained from theCCSDS Secretariat at the address indicated on page i .

associated detailed operational protocols which operate acrossthese layers, and the flow of control information required toinitialize the layers and direct the transfer of data between-em, are not presently addressed within this document : Theseremain items for potential extension of this recommendation .

The operating principles and procedure for the CCSDS are definedin Reference [1] . The context of the Channel Service within theoverall Telecommand System is described in Reference [2] . This isa working document, subject to update as experience is gained,which provides an inter-Agency coordination mechanism thatensures that compatible implementations are facilitated .


0CARDNUMBER 1237 DOCUMENT SPAR-R .110 7

TITLE: Vulnerability of Communications Spacecraft to ASAT Laser Weapons

AGENCY/AUTH : SPAR

REFERENCES

ABSTrtACT On Microfiche, see title Completed in 198 1

CLASS Design SOURCE Commercial SPAR

------------------------------•------ ..------------ ..-------------- ----SCOPE See title

18/oa/90Provided - Class

0CARDNUMBER 1238 DOCUMENT AGARD # 40 6

TITLE : The Aerospace Environment at High Altitude and its Impl for S/C

AGENCY/AUTH : AGARD

REFERENCES

ABSTRACT See unclassified Volume 71 Progress in Astronautics and Aeronauti cs

CLASS Design SOURCE Institution AGAR

------------------------------------ ----------------------------------SCOPE

19/04/90Provided - Clas s

CARDNUMBER 1239 DOCUMENT 6 .17 CRC List

TITLE : NATO IV Space Segment Technical Specifications First Draft

AGENCY/AUTH : NATO NICSMA

REFERENCES 6 .7 CRC List

ABSTRACT First cut design spec for NATO SATCOM Phase I V

CLASS Design SOURCE Military NATO

----------------------------------------------------- ..---------------SCOPE This working paper contains only part of the technical

specification of the NATO SATCOM Phase IV satellite, namely, somegeneral background information and the first draft of thecommunications subsystem specifications prepared by CmC forNICSMA . The invitation for bids (IFB) which is planned to beissued in mid 198 0 will also include technical specifications forseveral other subsystems ; it is assumed that these "bus"specifications (which only inderctly support the NICS userrequirements defining the satellite payload) will be incorporatedin due course by the managerial aerospace authority (SPO) .


0CARDNUMBER 1240 DOCUMENT 6 .7 CRC List

TITLE: NATO IV Space Segment Performance Specifications :Comms Subsystem

AGENCY/ALTTH :, NATO NICSMA

REFERENCES NIC'S Stage II Architecture Report (NICSMA D/81 )

ABSTRACT This report has been prepared by the SHAPE Technical Centre forthe NATO Integrated Communications System Management Agency

(NICSMA) under the terms of the NICS Special Project SAT/15 .


------------------------- -------------- ..-SCOPE This report contains only part of the technical specification of

the NATO SATCOM Phase IV satellite, namely, background informationand the specifications of the communications subsystem,includingthe ground based equipment required for operationa lpayload control and to enhance NATO SGTs to use th eNATO IV satellite effectively . The invitation for bids (IFB)will also include technical specifications for several othersubsystems supporting the payload ; these "bus" specifications willbe incorporated by NICSMA . The same applies to other requirementsto be included in the IFB such as environmental specifications,flight support operations, testing, training, etc .

19/04/90Provided - Clas s

sCARDNUMBER 1241 DOCUMENT 6 .8 CRC List

TITLE : Joint MILSATCOM Threat Summary

AGENCY/AUTH : U .S. Defense Intelligence Agency

REFERENCES

ABSTRACT


-------------•----------------------------------------------------_---SCOPE


CARDNUMBER 1242 DOCUMENT 6 .9 CRC List

TITLE: Confidential. Title

AGENCY/AUTH : U .S . Defense Intelligence Agency

REFERENCES

ABSTRACT


----------------------------------- .-----------------------------------SCOPE


sCARDNUMBER 1243 DOCUMENT STC TM-68 4

TITLE: An Assestnent of the Airborne and Spaceborne ECM Threat,SATCOM

AGENCY'/AUTH: NATO

REFERENCES

ABSTRACT February 1987


--------------------------------------------------------------------SCOPE


•CARDNUMBER 1244

DOCUMENT DREO Rep # 84 2

TITLE: Nuclear Vulnerability and Survivability of a Satellit e

AGENCY/AUTH : DREO P . Bhartia

REFERENCES

ABSTRACT April 1981,


---------------------------------- .--SCOPE --


CARDNUMBER 1245 DOCUMENT DREV Rep 4322/8 4

TITLE: The Potential Threat: of ASAT Laser Weapons to Geostationary S/C

AGENCY/AUTH : DREV J .P . Morency

REFERENCES

ABSTRACT July 1984, before the year 200 0


SCOPE -----•-------

UnclassifiedtECURITV CLAi>ri/ICATION O F iO11M

(hi0hat ehtsification of Tïtle, AYstraot, Keywords)

olect office o

r CONTROL DATADOCUMENTtfrawity Ct~ssilitetitrrt of tHlo, body of abatraet aed ledexine anrwtetlon must be sntsrrrd wharf the ovdrsll document Is classifisdl

ORIGINATOR (the nome .~f►d address of the orpanization preparing the document. 2. SECURITY CLASSIFICATIO NOrganizations for whom the dotument wu prepared . e.g. Establishment sponsoring (overall security classification of the document.a contractor's report, or tasking apency, are entered in section 8 .) including spec ial warning terms if applicable)

Routes Incorporated202-329 I%iarch Rd . Kanata, Ont,. K2K J?ïl Unclassified

3. TITLE (the complete documen+ title as i ndicated on the t i tle pape . Its classification should be i ndi cated by the appropriatea bbrevi ►tion (S,C,R or U) in o .rentheses after th,y tiUe. )

Space ~ualification Specification for ~~iilitary Satellites(U )

4. AUTHORS "st nane, first name , midole initial) Payne William F.

Buckingham ttonaldDaniels Frederick R .Townsend Peter L .

5 . DATE OF PUBLICATION ( month and year of publication of 6a. NO. OF PAGES ( total 6b, NO. OF REFS (total c i ted i ndocument) Containinp mformatton. Include document)

April 1990 Annexes,90

ndices, etc. )2

23

S

7 . OESCRIPTIVE NOTES (the category of the document, e.g. techn icai report, technical note or memorandum. If appropriate, enter the type o freport, e .g. interim, progress, summary, annual or final. Give ne inclusive dates when e Specific reporting penod is covered. )

Technical Note - Final ttepor~t

sponsoring the reselerch and development. Include th elaborator ySPONSORING ACTIVITY ( the ttame of the departmentaddress.)

CrZC O~AT

9a. PROJECT OR GRANT NO. (if appropriate, the applicai' le rese,arch 9b . CONTRACT NO. (if appropriate, the applicable number under

and development project or grant number under which it . document wh i ch the document was wr itten )was written. Pleise specify whether prolect or grant)

N/A 36001-9-359 4/01 5 V10a ORIGINATOR'S DOCUMENT NUMI3 ER (the officid document 10b. OTHER DOCUMENT NOS. (Any other numbers which may

number by which the document is identified by the originating be assigned this document either by the originator or by th e

activity. This nutnber must be unique to this document) sponsor)

K 34-90

11 . DOCUMENT AVAILABtLITY (any limrtauc - . on further dtsseminatton of the document, other than those i~,nposed by security classification)

( x1 Unlimited distributionDistribution limited to defence uepartmem!, and defence contractors : further distribution only as approve d

Distribution limited to defence departments and Canadian defence contreetors ; further distribution oniy as approve d

Distribution limited to government departments and agencies ; further distribution only as epprove d

Distribution limited to defence departments; further distribution only as approved( 1 Other (please specify) :

12 . DOCUMENT ANNOUNCEMENT 4M limitation to the biblioq►~Vmc announcement of this document . This will normally correspond t o

the Document Avnltlilty (11). However, where further distribution (beyond the audience specified in 11) is possibte, a wide r

annou,lcement audience may be seleated. )

~._. ., .

Unclassifie d

SECURITV CLASSIFICATION OF FOAM

DC003 i 1!Cô/81

Iinn Q!a{,f`jadpCUMtTr tu►sMtcATtON or ro11M

13. ABSt HACT I o(eief and factual summary of the aoarnentt It may On eppeer elsewhere in the ►ody of the document itself . It is hiphlydesir+ble that the abstract of classif ied documents be uncessified, Each persOreph of the abstract siudl begin with an indication of the ~security clessificetron of the information in the perpreph lunleis the document itself is uncWsified) represented as (S), IC), (R), or lUl.It is not necessay to i nclude two sbstrects in both office! loiqupes unless the text is bdâqueq.

1.1 )tiftsposp eot pttaft

50~~ The Gbjetotivr was to compile and oxqanisea reference materialso that it can. sabtsrqueatlt be used to qtrsarats a ooheresst set ofonviromisntal speioLtioationt for Caaadian Perces spaos-baseadhardware prooorsuats . ,

1.2 toopet o!.' atmy

~ Zhrehe sources of ra

have been oataloqne,d. Dorinq the study Pontas also identified

• Standard military documents= both classified andnnolassilieaci .

• Documents lrroae institutions and qoveirmwnt aqesnoiss .• Cosseroiallf produced documents .

1n eZistinM collection of papWs and stpaaifiaations wasprovided by CAC/M2o to Routes, for review and inclusion in thisrrport' thoso 1o2ausents daalia4 with suvitoanetntal qualification

other relevant doonsianta which are listed in the 7lppeuidiz. Thisappetndiz is described in section S

. //

14. KEYWORDS, DESCRIPTORS or IDENTIFIERS jtechniully meaningful terms or short phrases that clwecteti :e a document and could behelpful in cataloguing the document They should bit selected so that no security classification is re0uired. Identifiers, such as equipmentmodel designation, trade name, military project code nerne, geographic location may also be i ncluded. If possible keywords should be selectedfrom a published theseurus- e .g . Theseurus of Engineering and Scientific Terms REST) and that theseuruswidentnfied. If it is not poss i ble toselect indexing tnrms which are Unclassified, the classification of each should be indicated as with the title. )

Specifications, Standards, Handbooks

Online Search

Spacecraft Design

Spacecraft Qulification

Spacecraft Testing

Document Sources

Database i,:ethod s

Unclassified

rrr . .w .~~ w, ♦ ww .w .w .w .w~~ we eAb .•

~