Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Rechter Halter/RHLinker Halter/LH
P92 CXCBLSystem P92
Halter mit Stechbreiten 3 mm | Holders for cutting width 3 mm
P92 CXCBRSystem P92
WG380 Bezeichnung/Ref. ID-Nr. EUR/St. Ø
max h h1 h2 b P S L L1 L2 Promo Preis/Price
Menge/Amount
P92 CXCBL 2020 K30 14 10096 115,16 L 28 20 20 5 20 14 3,0 125 34,0 26 48,00P92 CXCBL 2020 K30 17 10098 115,16 L 34 20 20 5 20 17 3,0 125 37,0 29 48,00P92 CXCBL 2525 M30 17 10110 119,10 L 34 25 25 - 25 17 3,0 150 37,0 - 52,00
P92 CXCBR 2020 K30 14 10095 115,16 R 28 20 20 5 20 14 3,0 125 34,0 26 48,00P92 CXCBR 2020 K30 17 10097 115,16 R 34 20 20 5 20 17 3,0 125 37,0 29 48,00P92 CXCBR 2525 M30 17 10109 119,10 R 34 25 25 - 25 17 3,0 150 37,0 - 52,00
BemerkungBei Haltern mit einer Schneidenauslage von 17 mm (P = 17 mm), sollten beim Längsdrehen mittlere Vorschübe verwendet werden.
Halter und Platten mit dem gleichen Maß „S“ passen zusammen.
CommentTool holders with an extension of 17 mm offer an enlarged range for parting off. When used for turning, moderate feeds should be applied.
Holder and inserts with the same „S“ dimension fit together.
Firma Company
Ort Place
Ansprechpartner Contact person
Telefon Phone
Datum/Unterschrift Date/Signature
EmpfehlungAusgefülltes Blatt per Fax oder Mail schicken oder Sie geben bei der Bestellung: SCTD Promo SELECT als Stichwort an.
RecommendationSend the leaflet as an order or refer to SCTD Promo SELECT when ordering.
Bestellung | Order No:
SCTD Promo SelectPLACUTA DE TAIERE
Aplicatiile de taiere cu placute inguste duc la reduceri masive de costuri , energie si material
Oferta valabila pana in 28.02.2017
A dif erent world of performance
* Der Promopreis wird erst bei einer Abnahme von 100 Wendeplatten gültig.
* The promoprice will be valid beginning with an order about 100 inserts.
PROMOTIE
WG300Denumire
PM NANO-SPEED
EUR/ buc.
Pret in promotie
PM CARBO-SPEED
EUR/buc.
Pret in promotie L R S
Cantitate /Amount
ID-Nr. ID-Nr.
SCTD 1,5 50010 10,97 7,68 50012 12,01 8,41 N 16 0,2 1,5 +0,15 0
SCTD 2 50014 11,44 8,00 50016 12,48 8,74 N 20 0,2 2,0 +0,15 0
SCTD 2,5 50018 11,69 8,18 50020 12,73 8,91 N 20 0,2 2,5 +0,15 0
SCTD 3,0 53869 12,30 8,61 53871 13,24 9,27 N 20 0,2 3,0 +0,15 0
SCTL 1,5 6D 50022 12,31 8,62 50024 13,35 9,35 L 16 0,2 1,5 +0,15 6
SCTL 2 6D 50026 12,79 8,95 50028 13,83 9,68 L 20 0,2 2,0 +0,15 6
SCTL 2,5 6D 50030 13,09 9,16 50032 14,12 9,89 L 20 0,2 2,5 +0,15 6
SCTL 3,0 6D 53884 13,55 9,49 53886 14,58 10,21 L 20 0,2 3,0 +0,15 6
SCTR 1,5 6D 50034 12,31 8,62 50036 13,35 9,35 R 16 0,2 1,5 +0,15 6
SCTR 2 6D 50038 12,79 8,95 50040 13,83 9,68 R 20 0,2 2,0 +0,15 6
SCTR 2,5 6D 50042 13,09 9,16 50044 14,12 9,89 R 20 0,2 2,5 +0,15 6
SCTR 3,0 6D 53888 13,55 9,49 53890 14,58 10,21 R 20 0,2 3,0 +0,15 6
SCTD/R/LSystem P92
enlarged view
Placute pentru debitare | Inserts for parting off
new!Rechter Halter/RHLinker Halter/LH
WG380 Bezeichnung/Ref. ID-Nr. EUR/
St.Ø
max h h1 h2 b P S L L1 L2 Promo Preis
Menge/ Amount
P92 CXCBL 1212 K15 08 30109 115,16 L 16 12 12 4 12 8 1,5 125 19 19 48,00P92 CXCBL 1212 K15 14 44739 115,16 L 28 12 12 4 12 14 1,5 125 25 22 48,00P92 CXCBL 1616 K15 08 30100 115,16 L 16 16 16 - 16 8 1,5 125 19 - 48,00P92 CXCBL 1616 K15 14 44740 115,16 L 28 16 16 - 16 14 1,5 125 25 - 48,00P92 CXCBL 2020 K15 14 44741 115,16 L 28 20 20 - 25 14 1,5 125 25 - 48,00P92 CXCBL 1616 K20+25 11 33452 115,16 L 22 16 16 - 16 11 2+2,5 125 19,5 - 48,00P92 CXCBL 1616 K20+25 17 33473 115,16 L 34 16 16 5 16 17 2+2,5 125 34 26 48,00P92 CXCBL 2020 K20+25 14 33454 115,16 L 28 20 20 - 20 14 2+2,5 125 30 - 48,00P92 CXCBL 2020 K20+25 17 33474 115,16 L 34 20 20 - 20 17 2+2,5 125 34 - 48,00
P92 CXCBR 1212 K15 08 30125 115,16 R 16 12 12 4 12 8 1,5 125 19 19 48,00P92 CXCBR 1212 K15 14 44734 115,16 R 28 12 12 4 12 14 1,5 125 25 22 48,00P92 CXCBR 1616 K15 08 30126 115,16 R 16 16 16 - 16 8 1,5 125 19 - 48,00P92 CXCBR 1616 K15 14 44735 115,16 R 28 16 16 - 16 14 1,5 125 25 - 48,00P92 CXCBR 2020 K15 14 44736 115,16 R 28 20 20 - 25 14 1,5 125 25 - 48,00P92 CXCBR 1616 K20+25 11 33451 115,16 R 22 16 16 - 16 11 2+2,5 125 19,5 - 48,00P92 CXCBR 1616 K20+25 17 33470 115,16 R 34 16 16 5 16 17 2+2,5 125 34 26 48,00P92 CXCBR 2020 K20+25 14 33453 115,16 R 28 20 20 - 20 14 2+2,5 125 30 - 48,00P92 CXCBR 2020 K20+25 17 33471 115,16 R 34 20 20 - 20 17 2+2,5 125 34 - 48,00
P92 CXCBLSystem P92
Halter mit Stechbreiten 1,5 - 2,5 mm | Holders for cutting width 1,5 - 2,5 mm
P92 CXCBRSystem P92
BemerkungBei Haltern mit einer Schneidenauslage von 17 mm (P = 17 mm), sollten beim Längsdrehen mittlere Vorschübe verwendet werden.
Halter und Platten mit dem gleichen Maß „S“ passen zusammen. TOP! 2+2,5 Platten passen in den gleichen Plattensitz.
CommentTool holders with an extension of 17 mm offer an en-larged range for parting off. When used for turning, moderate feeds should be applied.
Holder and inserts with the same „S“ dimension fit together. TOP! 2+2,5 mm inserts fit in the same tool holder.
Geometria de debitare SupernovaMuchie aschietoare honuita impreuna cu flancuri intarite si rupator de span larg. Recomandat pentru oteluri aliate si oteluri inoxidabile
SUPERNOVA Parting off geometry...Slightly honed cutting edge with reinforced flanks and large chip trough.Recommended for alloy steels and stainless steels.
O acoperire de inalta calitate cu nitrizi dezvoltata special pentru prelucrarea in general a otelurilor si a otelurilor inoxidabile.A super nitride coating, which has been developed espe-cially to machine steels in general and stainless steels.
O noua generatie de acoperire cu nitrizi, rezistenta la uzura si temperature de lucru ridicate. A fost dezvoltata special pentru prelucrarea oteluriolor inalt sau slab aliate.A new generation of a heat-and wear resisting nitride coating. It has been developed especially to machine low and high alloy steels.
* Der Promopreis wird erst bei einer Abnahme von 100 Wendeplatten gültig.
* The promoprice will be valid beginning with an order about 100 inserts.
Intersection main cutting edge
WG300Bezeichnung/Ref.
PM NANO-SPEED
EUR/St.
Promo Preis
Nanospeed
PM CARBO-SPEED
EUR/St.
Promo Preis
CarbospeedL R S Menge/
Amount
ID-Nr. ID-Nr.
SCTD 1,5 50010 10,97 4,39 50012 12,01 4,80 N 16 0,2 1,5 +0,15 0
SCTD 2 50014 11,44 4,58 50016 12,48 4,99 N 20 0,2 2,0 +0,15 0
SCTD 2,5 50018 11,69 4,68 50020 12,73 5,09 N 20 0,2 2,5 +0,15 0
SCTD 3,0 53869 12,30 4,92 53871 13,24 5,30 N 20 0,2 3,0 +0,15 0
SCTL 1,5 6D 50022 12,31 4,92 50024 13,35 5,34 L 16 0,2 1,5 +0,15 6
SCTL 2 6D 50026 12,79 5,12 50028 13,83 5,53 L 20 0,2 2,0 +0,15 6
SCTL 2,5 6D 50030 13,09 5,24 50032 14,12 5,65 L 20 0,2 2,5 +0,15 6
SCTL 3,0 6D 53884 13,55 5,42 53886 14,58 5,83 L 20 0,2 3,0 +0,15 6
SCTR 1,5 6D 50034 12,31 4,92 50036 13,35 5,34 R 16 0,2 1,5 +0,15 6
SCTR 2 6D 50038 12,79 5,12 50040 13,83 5,53 R 20 0,2 2,0 +0,15 6
SCTR 2,5 6D 50042 13,09 5,24 50044 14,12 5,65 R 20 0,2 2,5 +0,15 6
SCTR 3,0 6D 53888 13,55 5,42 53890 14,58 5,83 R 20 0,2 3,0 +0,15 6
SCTD/R/LSystem P92
Vergrößerungs-ansicht
enlarged view
Stechdrehplatten zum Abstechen | Inserts for parting off
SUPERNOVA Stechgeometrie...Gehonte Hauptschneide mit verstärkten Flanken und geräumiger Spankammer. Besonders geeignet für legierte und rostfreie Stähle.
SUPERNOVA Parting of geometry...Slightly honed cutting edge with reinforced flanks and large chip trough.Recommended for alloy steels and stainless steels.
new! Bara strunjire stanga/RH
Bara strunjire stanga/LH
WG380 Denumire ID-Nr. EUR/
buc.Ø
max h h1 h2 b P S L L1 L2Pret
promotie Cantitate
Amount
P92 CXCBL 1212 K15 08 30109 115,16 L 16 12 12 4 12 8 1,5 125 19 19 10,00P92 CXCBL 1212 K15 14 44739 115,16 L 28 12 12 4 12 14 1,5 125 25 22
P92 CXCBL 1616 K15 08 30100 115,16 L 16 16 16 - 16 8 1,5 125 19 -
P92 CXCBL 1616 K15 14 44740 115,16 L 28 16 16 - 16 14 1,5 125 25 -
P92 CXCBL 2020 K15 14 44741P 115,16 L 28 20 20 - 25 14 1,5 125 25 -
P92 CXCBL 1616 K20+25 11 33452 115,16 L 22 16 16 - 16 11 2+2,5 125 19,5 -
P92 CXCBL 1616 K20+25 17 33473P 115,16 L 34 16 16 5 16 17 2+2,5 125 34 26
P92 CXCBL 2020 K20+25 14 33454 115,16 L 28 20 20 - 20 14 2+2,5 125 30 -
P92 CXCBL 2020 K20+25 17 33474 115,16 L 34 20 20 - 20 17 2+2,5 125 34 -
P92 CXCBR 1212 K15 08 30125 115,16 R 16 12 12 4 12 8 1,5 125 19 19
P92 CXCBR 1212 K15 14 44734 115,16 R 28 12 12 4 12 14 1,5 125 25 22
P92 CXCBR 1616 K15 08 30126 115,16 R 16 16 16 - 16 8 1,5 125 19 -
P92 CXCBR 1616 K15 14 44735 115,16 R 28 16 16 - 16 14 1,5 125 25 -
P92 CXCBR 2020 K15 14 44736P 115,16 R 28 20 20 - 25 14 1,5 125 25 -
P92 CXCBR 1616 K20+25 11 33451 115,16 R 22 16 16 - 16 11 2+2,5 125 19,5 -
P92 CXCBR 1616 K20+25 17 33470 115,16 R 34 16 16 5 16 17 2+2,5 125 34 26
P92 CXCBR 2020 K20+25 14 33453P 115,16 R 28 20 20 - 20 14 2+2,5 125 30 -
P92 CXCBR 2020 K20+25 17 33471 115,16 R 34 20 20 - 20 17 2+2,5 125 34 -
P92 CXCBLSystem P92
Bare de debitare/strunjire cu latimea de taiere de 1,5 – 2,5 mm | Holders for cutting width 1,5 - 2,5 mm
P92 CXCBRSystem P92
Barele de debitare/ strunjire ce permit o adancime de taiere de 17 mm ofera un diametru maxim de taiere mai mare. La folosirea acestora pentru strunjire se recomanda avansuri moderate.
Doar barele de debitare/ strunjire si placutele cu aceeasi dimensiune “S” se pot folosi impreuna.Dimensiunile S de 2 si 2.5 mm pot fi folosite pe aceeasi bara de debitare/ strunjire.
Tool holders with an extension of 17 mm offer an en-larged range for parting off. When used for turning, moderate feeds should be applied.
Holder and inserts with the same „S“ dimension fit together. TOP! 2+2,5 mm inserts fit in the same tool holder.
Supernitrid-Schicht zur Bearbeitung von Stählen allgemein und rostfreien Stählen empfohlen.A super nitride coating, which has been developed espe-cially to machine steels in general and stainless steels.
Die neueste Generation der Powernitrid-Schicht ist zur Bearbeitung von Stählen allgemein und hoch legierten Stählen empfohlen.A new generation of a heat-and wear resisting nitride coating. It has been developed especially to machine low and high alloy steels.
SCTL.. linke Platte | LH insert SCTR.. rechte Platte | RH insert
* Der Promopreis wird erst bei einer Abnahme von 100 Wendeplatten gültig.
* The promoprice will be valid beginning with an order about 100 inserts.
Hauptschneide (Spaneinlauf)
Intersection main cutting edge
10,0010,0010,0010,0010,0010,0010,0010,00
10,0010,00
10,00
10,0010,0010,0010,0010,0010,00
Bara strunjire dreapta/RHBara strunjire stanga/LH
P92 CXCBLSystem P92
Bare de debitare/strunjire cu latimea de taiere de 3 mm | Holders for cutting width 3 mm
P92 CXCBRSystem P92
WG380 Denumire ID-Nr. EUR/buc. Ø
max h h1 h2 b P S L L1 L2 Pret in promotie
Cantitate/Amount
P92 CXCBL 2020 K30 14 10096 115,16 L 28 20 20 5 20 14 3,0 125 34,0 26 10,00P92 CXCBL 2020 K30 17 10098 115,16 L 34 20 20 5 20 17 3,0 125 37,0 29
P92 CXCBL 2525 M30 17 10110 119,10 L 34 25 25 - 25 17 3,0 150 37,0 -
P92 CXCBR 2020 K30 14 10095 115,16 R 28 20 20 5 20 14 3,0 125 34,0 26
P92 CXCBR 2020 K30 17 10097 115,16 R 34 20 20 5 20 17 3,0 125 37,0 29
P92 CXCBR 2525 M30 17 10109 119,10 R 34 25 25 - 25 17 3,0 150 37,0 -
Firma
Adresa
Persoana contact
Telefon
Data/ Semnatura
Barele de debitare/ strunjire ce permit o adancime de taiere de 17 mm ofera un diametru maxim de taiere mai mare. La folosirea acestora pentru strunjire se recomanda avansuri moderate.
Doar barele de debitare/ strunjire si placutele cu aceeasi dimensiune “S” se pot folosi impreuna.Dimensiunile S de 2 si 2.5 mm pot fi folosite pe aceeasi bara de debitare/ strunjire.
Formular de comanda:
SCTD Promo SelectDIE Abstechplatte | THE parting off insert
Differenz der Spanbreiteneröffnet Anwendungen, die zu enormen Material-, Kosten- und Energieeinsparungen führen können.
The cost cuttersApplication of small width safe an enormous amount of material, costs and energy.
A dif erent world of performance
%
10,0010,00
10,0010,0010,00
gy.
CommentTool holders with an extension of 17 mm offer an enlarged range for parting off. When used for turning, moderate feeds should be applied.
Holder and inserts with the same „S“ dimension fit together.
Preturile promotionale din acest pliant sunt valabile doar la cumpararea unui pachet format din o bara de strunjire si 20 placute sau multiplii
acestora.
Distribuitor:ATMA GRUP S.R.L. Str. Emile Zola nr. 20 Timişoara,Romania
[email protected] Phone: 0040-256 303386
Fax: 0040-256 274108