Embed Size (px)
Citation preview
P1100 SERIES
• Vertically positioned fl oating piston means longer life
• Simple cold end design assembly, easy maintenance
• Large piston diameter and longer pump stroke mean slower speeds and smooth operation
• Pump packing is easily adjusted through a large access port, which allows for extended packing life
• Splash oil lubricated drive provides extended pump life and minimizes maintenance requirements
• Carbon dioxide cylinder fi lling
• Nitrous oxide cylinder fi lling
• Carbon dioxide
• Nitrous oxide
• Cold end and drive assembly, TEFC electric motor
• Galvanized steel base plate with drive and guard
• NEMA 1 pushbutton starter • Surge chamber • Relief valve and burst disc • Pressure gauge and snubber • Safety bypass relief valve arrangement
automatically returns liquid to tank at 1000 psi (69 bar)
• Oil lubricated drive end (oil shipped loose)
FEATURES & BENEFITS APPLICATIONS
LIQUIDS PUMPED
TYPICAL SCOPE OF SUPPLY
CYLINDER FILLING PUMP SPECIFICATIONS
Flow Rate
gpm 5.8
lpm 21.9
lb/min 50
Suction Pressure
psi Min. 200
Max. 450
bar Min. 13.7
Max. 31
Pump Design Rating @1000 psi (69 bar)
hp 7.5
kw 5.6
Maximum Working Pressure
psi 1,200
bar 82.7
Skid Settings
High pressure relief valve setting 1,200 psi (82.7 bar)
High pressure bypass relief valve setting1,000 psi (69 bar)
Burst disc pressure point 2000 psi (138 bar)
60 HZ performance
Liquid Nitrous Oxide is a potentially dangerous fl uid and must be handled with extreme care. See Compressed Gas Association standard CGA G-8.3-2016 for further information. Under certain combinations of temperature and pressure Nitrous Oxide can explosively decompose with serious consequences. Nitrous Oxide is an oxidizer that actively supports combustion. Nitrous Oxide handling equipment must be cleaned for Oxygen service. Design and construction of storage and piping systems for pumping liquid Nitrous Oxide must assure material compatibility and be such as to prevent loss of prime or “dry running” of pumps. Nitrous Oxide is an active solvent for many materials and material compatibility with Nitrous Oxide must be confi rmed before their use. For additional historical information relating to hazards associated with Nitrous Oxide decomposition refer to Chemical Safety Board report number 2016-04-I-FL Dated February 2017.
FOR PUMPS INTENDED TO BE USED IN NITROUS OXIDE SERVICE
Bulletin No. ACD P1100-R2.17© 2017 ACD LLC, Printed in USA
MANUFACTURING
2321 S. Pullman Street Santa Ana, CA 92705 USATel 800.525.4216 (USA only)Tel +1.949.261.7533 • Fax [email protected] • acdllc.com
GLOBAL SERVICE
NORTH AMERICAAtlantaAtlanta, Georgia, USA+1 404.696.8113 • Fax +1 [email protected] • cryoindservice.com
California (ACD Service) Santa Ana, California, USA+1.714.568.0201 • Fax [email protected] • acdcom.com
HoustonHouston, Texas, USA+1 281.590.4800 • Fax +1 [email protected] • cryoindservice.com
PittsburghImperial, Pennsylvania, USA+1 724.695.1910 • Fax +1 [email protected] • cryoindservice.com
Red DeerRed Deer, Alberta, Canada+1.403.352.4436 • Fax [email protected] • cryoindservice.com
TorontoToronto, Ontario, Canada+1 416.502.1950 • Fax +1 [email protected] • cryoindservice.com
INTERNATIONALAustraliaDandenong, Victoria, Australia+61.3.9791.7888 • Fax [email protected] • cryoquip.com
ChinaHangzhou, China+86.571.8619.4799 • Fax [email protected] • cryoindservice.com
Europe (ACD CRYO)CH-4142 Muenchenstein Switzerland+41.61.413.0230 • Fax: [email protected] • acdcryo.com
D-79415 Bad Bellingen Germany+49.7635.8105.0 • Fax: [email protected] • acdcryo.com
United Arab EmiratesJebel Ali Free Zone, Dubai, UAETel: [email protected] • acdcom.com
IndiaA Division of Rhine Engineering Pvt. Ltd.Vadodara, Gujarat, India+91.265.283 0113 • Fax +91.265.283 [email protected] • acdcom.comKolkatta, West Bengal, India+91.973.216 [email protected] • acdcom.com
KoreaYongin-si, Gyeonggi-do, Korea+82.31.286.6114 • Fax [email protected] • cryoindservice.com
Malaysia Shah Alam, Selangor D.Ehsan, Malaysia+60 (3) 5740.4800 • Fax +60 (3) [email protected] • cryoindservice.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
P1100 SERIES
OVERALL DIMENSIONS: TYPICAL P1100 SKID
3K
2K
1K
207
138
69
0 1 2 3 4 5 6
4 8 11 15 19 23
Flow Rate – gpm
Flow Rate – lpm
Dis
char
ge
Pre
ssur
e –
psi
Dis
char
ge
Pre
ssur
e –
bar
Mounting Holes,.50[13]Ø Thru4 Places
934" [247]
3818" [970]
34" [19]
3514" [895]
Suction Inlet3/4" NPT(F)
23 58" [600]
958" [245]
1834" [476]
434" [121]
1634" [425]47
8" [123]
32 " [830]
218
58
" [56]
Discharge1/2" NPT(F)
By-Pass1/2" NPT(F)
H.P. Relief1/2" NPT(F)
PUMP PERFORMANCE CURVE
inch/[mm]
• Dual cylinder manifold with bypass and adjustable pressure regulator
• NEMA 4 pushbutton starter
OPTIONAL ACCESSORIES
