AccessingPASOLINK NEO with

web based LCT

1. User should prepare the followings:

-computer (PC), with the followings:

Hardware:

-HD: 100 MB or higher empty capacity

- 1,6 GHz CPU, RAM: 256 MB (minimum)

- Display: LCD 1,024 × 768

- CD-ROM drive

- Serial port

- USB port

Software:

- OS: Windows 2000/Xp

- IE6.0 SP2

- Java Runtime Environment V1.5.0_05 or higher

-USB cable with USB-B connector (USB A-B cable)

-the USB driver for PASOLINK NEO

2. Installation of the USB driver

2.1. Switch on the PASOLINK NEO equipment and the PC.

2.2. Connect the USB cable with its USB-B connector to the LCT port of the equipment. Connect theother end of the cable to one USB port of the PC.

2.3. The found new hardware wizard appears. Select “Install from a list or specific location [Advanced]”and click on “Next” button

2.4. Insert the CD-ROM of the USB driver into the PC and select “Search for the best driver in these locations” andcheck “Search removal media [floppy, CD-ROM...],” then, click on “Next” button. If you have the driver on a USB stick or in a folder on your PC you should choose „Include this location in the search” and specify the location wherethe driver is.

2.5. During the installation the following window will appear.

2.6. Click on the “Continue Anyway” button in the Hardware Installation alert pop-up

2.7. USB driver installation will be started, the necessary files for the new hardware will be installed

2.8. At the end of the installation the last window of the „Found New Hardware Wizard” appears.

2.9. Click on the “Finish” button. This is the end of the USB driver installation.

3. Dial-up setting (Windows XP)

3.1. Click on “Start”�“Setting”�“Control Panel” and on “Network

Connections” icon to start the Dialup setting.

3.2. The “Network Connections” window appears. Click on “Create a new connection” in theNetwork Tasks category.

3.3. The “Welcome to the New Connection Wizard” window appears. Click on “Next” button tocontinue.

3.4. Select “Connect to the network at my workplace” and click on “Next” button to continue.

3.5. Select “Dial-up connection” and click on “Next” button to continue.

3.6. On the “New Connection Wizard” window, enter “LCT” in the“Company Name” entry field and clickon “Next” button to continue.

3.7. Enter „1234” in the “Phone number” field and click on “Next” button to continue.

3.8. Verify that the connection “LCT” has displayed as the connection registered. You can also create a shortcuton your desktop if you need. Click on “Finish” button.

3.9. On „Connect LCT” dialog, click „Properties”3.10. Verify that „Modem-USB Modem Driver [COM(#)]” is selected on the Generaltab „Connect using:” check box, and „Show icon in notification area when connected inthe LCT Properties dialog. Then, click on“Configure” button.

3.11. On „Connect LCT” dialog, click „Properties” 3.12. Retain the default setting on the„Options” tab, click the „Security” tab.

3.13. Retain the default setting on the “Security” tab, click the „Networking” tab.

3.14. On the Networking tab, verify that PPP... is displayed in the „Type of dial-up server I amcalling” setting field, uncheck “File and Printer... and Client for Microsoft....”, “Client forMicrosoft Networks”. Then click on „Internet Protocol (TCPIP)” and then on the „Properties”button.

.

3.15. Verify that both „Obtain an IP addressautomatically” and „Obtain DNS server addressautomatically” are selected.

3.16. In the „Advanced TCP/IP Settings”dialog, mark check box of „Use defaultgateway on remote network” and for thePPP link is unchecked, then Click „OK”.

Click on „Advanced” button.

3.17. Retain the default setting on the „Advanced” tab and click „OK”.

4. Accessing the PASOLINK NEO

4.1. Switch on the PASOLINK NEO equipment and the PC.

4.2. Connect the USB cable with its USB-B connector to the LCT port of the equipment. Connect theother end of the cable to one USB port of the PC.

4.3. Click on „Start” menu button, select „Connect to”-> „LCT”,then, “Connect LCT” dial-up dialogappears.

4.4. Click on „Dial” button.

4.5. Open the Internet explorer and enter the address „http://172.17.254.253” and then press „Enter”.

4.6. The „LCT login” window appears.

You can select the username „User” which does not require a password (only for monitoring)

Or you can choose username „Admin” and password „12345678” (to access the LCT and for monitoring)

After you selected the proper username and password click on the „Login” button.