Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
TRIO MAXPANEL SYSTEM
Trio Maxi is a multi functional panel formwork system for concrete walls.
The system features a variety of panel heights (up to 3.30m)and widths which enable the
formation of a clearly defined grid plan for any wall length.
Trio Max is aligned at its connection points via the use of formwork clamps making it extremely
durable for full speed concreting whilst resisting vibration.
Fewer components are required when using Trio Max which results in quick and easy working
with minimum storage space needed.
Trio Max is developed and produced in accordance
to European standards.
1
2
9
TRIO MAXOVERVIEW
3
87 6
54
1 Formwork Clamp
2 Formwork Clamp Long
3 Scaffold Bracket
4 Compensation Waler
5 Tie Rod
6 Wing Nut Plate
7 Push-Pull Props
8 base Plate, Brace Connector
9 Stop End Tie
TRIO MAXPANEL COMBINATIONS
Guarantees the largest possible range of sizes with the least possible amount of panels
Reduced storage space on building sites
Increased amount of castings per element, held on the construction site
Reduced costs for through varied combinations for every ground plan
Stockpiling of horizontal lying panels viable
Stepped or slanted panels at different heights, offset walls, length adjustments
and corner solutions are possible
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 330
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
Trio Maxi Panel 270
TRIO MAXPANEL SIZES
Height Width
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
330 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
270 cm
240 cm
120 cm
90 cm
72 cm
60 cm
55 cm
50 cm
45 cm
40 cm
30 cm
25 cm
24 cm
20 cm
240 cm
120 cm
90 cm
72 cm
60 cm
55 cm
50 cm
45 cm
40 cm
30 cm
25 cm
24 cm
20 cm
WeightPanel Type
400 kg
195 kg
142 kg
120 kg
107 kg
101.5 kg
96 kg
88 kg
83 kg
72 kg
61.5 kg
61 kg
58 kg
331 kg
163 kg
118.5 kg
100 kg
89.5 kg
85 kg
80 kg
73 kg
68.5 kg
60 kg
52 kg
50 kg
48.5 kg
TRIO MAXPANEL SIZES
Height Width WeightPanel Type
164 kg
73.5 kg
60 kg
49.5 kg
44 kg
41.5 kg
39.5
35 kg
33 kg
28.5 kg
24.5 kg
24 kg
23 kg
Weight (galv.)
99 kg
83.2 kg
36.5 kg
Weight
124 kg
81 kg
45.6 kg
Weight
138 kg
107.5 kg
72.5 kg
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Trio Maxi Panel 120
Panel Type
Inner Corner Panel 330
Inner Corner Panel 270
Inner Corner Panel 120
Panel Type (Powder Coated)
Articulated Corner 330
Articulated Corner 270
Articulated Corner 120
Panel Type (galv.)
Universal Panel 330
Universal Panel 270
Universal Panel 120
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
120 cm
Height
330 cm
270 cm
120 cm
Height
330 cm
270 cm
120 cm
Height
330 cm
270 cm
120 cm
240 cm
120 cm
90 cm
72 cm
60 cm
55 cm
50 cm
45 cm
40 cm
30 cm
25 cm
24 cm
20 cm
Width
30 cm
30 cm
30 cm
Width
30 cm
30 cm
30 cm
Width
72 cm
72 cm
72 cm
TRIO MAXCOMPONENTS
The Formwork element frame
consist of a closed steel profile,
hollow on the inside and an
18mm layered sheet composed
of Birch veneer.
Available in 3.3m, 2.7m, 1.2m and
0.6m.
For the shuttering of right-angled
corners, from the inside.
Trio Max Panels Inner Corner Panel 90°
Aluminium frame, shuttering skin
consists of 11 mm full-plastic
sheets.
Aluminium frame with
integrated 10 mm thick
shuttering skin, bonded 7-ply
multiplex veneer.
Small panels serve for optimal
adaptation to floor plans
Stripping Corners
Universal Panels Wall Thickness Compensator
Foundation Tie Clamp Foundation Stap
Straightens and draws all panels
together. Only one clamp is
needed for all panels
compensating up to 26cm.
Galvanized.
Formwork Clamp Long Formwork Clamp
Articulared Corner Panel
Used for shaft shuttering. 3m
tolerance per side enables
precise setting up and easy
solutions.
A Universal Panel with pre-drilled
holes and a 3-hole grid at anchor
level, can be delivered in
every height.
Used to adjust the wall thickness
in 5, 6 and 10 cm increments.
Available in steel or aluminium.
Mounted at the profile, and
secured with a bolt
Connection for composed
elements with 6 cm edge
profile
Straightens and draws all panels
together. Only one clamp is
needed for all panels
compensating up to 12cm.
Galvanized.
TRIO MAXCOMPONENTS
Bridges lengths adjusments and
increases rigidity of inter panel
connection.
Fastens onto the integrated track
on the panels.
Made of high quality steel.
Used to lift panels safely and
efficiently.
Compensation Waler Lifting Hook
for the assembly of a secure 80 or
120 cm wide working platform.
Simply fastens to the vertical or
horizontal panel.
High quality powder coating, on
request available galvanized.
Push Pull Props
Wing Nut Plate
Scaffolding Bracket
Allows for the simple adjustment
of wall and column formwork.
Push Pull Props attach to panels
with a Brace Connector.
Available in four standard
lengths. Additional lengths are
available on request.
Fixes to the Tie Rods.
Tie Rods
Information45 | 60 | 75 | 90 | 180 cm
20 | 24 I 25 I 30 I 40 I 45 I 45 I 50 I 55 I 60 I 72 I 90 I 120 I 240 cm
120 I 270 I 330 cm
120 x 30 I 270 x 30 I 330 x 30 cm
120 x 72 I 270 x 72 I 330 x 72 cm
80 kN
Galvanized
Plywood resin coated birch 220g
Formwork Clamp
High quality form lining on panels
Integrated safety with Formsafe Edge Protection
High load capacity ensures quicker pours
TRIO MAXOVERVIEW
Tel: 0151 532 0179
www.formsafesystems.com
Product Description
Panel Widths
Panel Heights
Corner Panels
Universal Panels
Max Concrete Pressure
Corrosion Protection
Form Lining
Standard Connection
Special Features
Advantages
Guarantees the largest
possible range of sizes wih the
least amount of panels.
Stepped or slanted panels at
different heights offset walls
length adjustments and corner
solutions are possible.
Parts such as the Push-Pull
Props,Walers and Scaffold
Brackets can be fastened to
the integrated track.