Upload
dangtu
View
219
Download
0
Embed Size (px)
Citation preview
Owner's Manual
Model No. 486.24586
Sleeve HitcH
®
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.www.sears.com/craftsman
• Safety• Assembly• Operation• Maintenance• Parts
PRINTEDINUSA FORMNO.41362(05/20/10)
CAUTION:Before using this product, read thismanualandfollowallSafetyRulesandOperatingInstructions.
STOP
DO NOT RETURN TO STOREFor Missing Parts or AssemblyQuestions Call 1-866-576-8388
this is an attachment for “Garden tractors” with 23” or larger rear tires only. The sleeve hitch is not designed to fit or be used on “Yard tractors” or “lawn tractors” that have 22” or smaller rear tires.
2 Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
tABle OF cONteNtS
SAFETYRULES .............................................................. 2ACCESSORIES ............................................................... 3HARDWAREPACKAGECONTENTS ............................. 3CARTONCONTENTS ..................................................... 4TOOLSFORASSEMBLY ................................................ 4SLEEVEHITCHASSEMBLY ........................................... 5
LOCATETRACTORMODELNUMBER .......................... 5MOUNTINGASSEMBLY(917MODELTRACTORS)...... 6MOUNTINGASSEMBLY(247MODELTRACTORS)...... 7MAINTENANCE/OPERATION ....................................... 10REPAIRPARTSLIST..................................................... 11PARTSORDERING/SERVICE .........................BackPage
MODELNUMBER: 486.24586
SERIALNUMBER: __________________
DATEOFPURCHASE: __________________
Themodelnumberandserialnumberswillbefoundonadecalattachedtotheframe.
Youshouldrecordboththeserialnumberandthedateofpurchaseandkeepinasafeplaceforfuturereference.
WARRANTY
SAFETY
Anypowerequipmentcancauseinjuryifoperatedimproperlyoriftheuserdoesnotunderstandhowtooperatetheequipment.Exercisecautionatalltimes,whenusingpowerequipment.
• Readthisownersmanualandyourvehicleandimplementownersmanualsbeforeusingthishitch.
• Donotallowchildrentooperatevehicleorsleevehitch.
• Donotallowadultstooperatethevehicleorsleevehitch without proper instructions.
• Donotallowanyonetorideonsleevehitch.• Alwaysplacesleevehitchinloweredpositionwhenattachinganimplement.
• Beforeloweringandoperatingtheimplement,besureno one is near the area of operation.
• Lowerthesleevehitchandimplementwhenleavingvehicleunattended.
• Vehiclebrakingandstabilitymaybeaffected.Driveslowlywhensleevehitchandimplementareinraisedposition. Stay off of steep slopes.
• Keepallnutsandboltstightandbesuretheequipmentisinsafeoperatingcondition.
Lookforthissymboltopointoutimportantsafetyprecautions.Itmeans—Attention!! Become alert!! Your safety is involved.
ONE YEAR FULL WARRANTY
Whenoperatedandmaintainedaccordingtotheinstructionssuppliedwithit,ifthisSleeveHitchfailsduetoadefectinmaterialorworkmanshipwithinoneyearfromthedateofpurchase,call1-800-4-MY-HOME®toarrangeforfreerepair(orreplacementifrepairprovesimpossible).
Ifthisproductisusedforcommercialorrentalpurposes,thiswarrantyappliesforonly90daysfromthedateofpurchase.
Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
DONOTRETURNTOSTOREforMissingPartsorAssemblyQuestionsCall1-866-576-8388AttachmentHotline
3Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
HARDWARe PAcKAGe cONteNtS
NOte:Bolt(C),LockWasher(L)andNut(K)willonlybeusedifthemountingholesinthetractordonotalreadycontainboltsandnuts.
AcceSSORieS
A B D EC
H
J
F
G
K
L
M
N
I
O
Q
P
electRic ASSiSt Kit - MODel 486.24545
Thefollowingaccessoriesarerecommendedforusewithyourunit.Call1-800-4-MY-HOME®tofindoutiftheyareavailable.Ifavailable,theymaybepurchasedatmostCraftsmanoutletsorbycalling1-800-4-MY-HOME®.
ReF PARt NO. QTY DeScRiPtiONA 47947 2 Bolt,Hex5/8-11x2"B 47951 2 Bolt,Hex5/8-11x1-3/4"C 43087 4 Bolt,Hex3/8-16x1-1/4"D 43063 1 HexBolt,5/16-18x1"E 43350 4 Bolt,Carriage3/8-16x1"F HA3980 3 ClevisPin,5/8"x1-3/4"G 712-0242 2 HexJamNut,5/8-11H 712-0261 2 NylockNut,5/8-11I 47810 1 NylockNut,5/16"
ReF PARt NO. QTY DeScRiPtiONJ HA21362 4 NylockNut,3/8-16K 43015 4 HexNut,3/8-16L 43003 4 LockWasher,3/8"M 43070 2 FlatWasherN 23625 1 SpacerO 25685 1 SpacerPlateP 43343 3 Pin,HairCotter3/32"Q 714-0117 1 Pin,HairCotter,5/32"
4 Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
TOOLS FOR ASSEMBLY
cARtON cONteNtS
1
3
4 5
6
2 7
8
ReF QTY DeScRiPtiON1 1 SleeveHitchFrameAssembly2 1 RightMountingBracket3 1 Left Mounting Bracket4 4 LiftingLinkPlate
ReF QTY DeScRiPtiON5 4 HitchPin6 1 LiftLeverAssembly(withRightPivotBracket7 1 LeftPivotBracket8 1 SleeveHitchLiftAssembly
TOOLS NEEDED FOR ASSEMBLY(1) 1/2"WrenchorAdjustableWrench(2) 9/16"WrenchesorAdjustableWrenches(1) 15/16"WrenchesorAdjustableWrenches
5Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
Lookundertheseatofyourtractorandlocatethemodelnumber.Fortractorswithmodelnumbersbeginningwith917,proceedtoMOUNTINGBRACKETASSEMBLYonpage6.Fortractorswithmodelnumbersbeginningwith247,proceedtoSLEEVEHITCHASSEMBLYonpage7.
193653
®
MODEL 917. 000000
SERIAL 000000A000000
193653
®
MODEL 247. 000000
SERIAL 000000A000000
917 MODEL TRACTORS GO TO PAGE 6
247 MODEL TRACTORS GO TO PAGE 7
LOCATE TRACTOR MODEL NUMBER
FIGURE 1
STEP 1: (SEE FIGURE 1)• Assemblea5/16"x1"hexbolt,aspaceranda5/16"nylocknuttotheholeintheRightPivotBracket.
5/16" X 1" HEX BOLT
5/16" NYLOCK NUT
SPACER PIVOT
BRACKET
3/8-16 x 1" CARRIAGE BOLT
3/8" NYLOCK NUT
LIFT LEVERASSEMBLY
SLEEVE HITCH FRAME
LEFT PIVOT BRACKET
RIGHT PIVOT BRACKET
SteP 2: (SEE FIGURE 2)• PlacetheLeftPivotBracketontotheendoftheLiftLeverAssembly(theRightPivotBracketcomesalreadyinstalledontheassembly).
• AttachtheRightandLeftPivotBracketstotheSleeveHitchFrameAssemblyusingfour3/8"x1"carriageboltsand3/8"nylocknuts.
FIGURE 2
SLEEVE HITCH ASSEMBLY
6 Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
FIGURE 2
LIFT LEVERASSEMBLY
SLEEVE HITCHFRAME ASSEMBLY
WELD PIN 5/8" NYLOCK NUT
SPACER PLATE (SEE NOTE)
HEX BOLT 5/8" x 1-3/4"
STEP 1: (SEE FIGURE 2)• HooktheSleeveHitchFrameassemblyontotheweldpins.Attachthebottomoftheassemblytothetractorhitchusinga5/8"x1-3/4"hexboltanda5/8"nylocknut.
NOte:Ifyourtractorhitchhasridgesthatpreventthesleevehitchassemblyfromrestingflat,placethespacerplateunderneaththesleevehitchassembly.
SteP 2: (SEE FIGURE 2)• ProceedtoLIFTASSEMBLYinstructionsonpage8.
MOUNTING BRACKET ASSEMBLY
FIGURE 1A
3/8" HEX NUT
3/8" LOCK WASHER
LEFT MOUNTING BRACKET
3/8" x 1-1/4" HEX BOLT
RIGHT MOUNTING BRACKET
IF YOUR TRACTOR LOOKS LIKE FIGURE 1A• Installtwo3/8"x1-1/4"hexboltsintheleftsideofthe
tractor as shown. Attach the Left Mounting Bracket (pinattopfacingin)totheboltsusingtwo3/8"lockwashersand3/8"hexnuts.Repeatontherightside.
FIGURE 1B
ORIGINAL NUT
LEFT MOUNTINGBRACKET
3/8" FLAT WASHER(TOP HOLE ONLY)
REMOVE NUTSFROM BOLTS
RIGHT MOUNTINGBRACKET
3/8" LOCK WASHER(If new bolt and nut are needed)
IF YOUR TRACTOR LOOKS LIKE FIGURE 1B• Removethenutsfromthetwoboltsshownineachsideofthetractor,leavingtheboltsinplace.
• AttachtheLeftMountingBracket(pinattopfacingin)totheboltsusingtheoriginalnutsanda3/8"flatwasher.Repeatfortheotherside.
NOte:Ifnoboltandnutarepresentinahole,usea3/8"x1-1/4"hexbolt,3/8"lockwasherand3/8"hexnuttoattachtheMountingBrackettothehole.
THIS ASSEMBLY IS FOR 917 TRACTOR MODELS ONLY.
7Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
FIGURE 1
STEP 1: (SEE FIGURE 1)• HooktheSleeveHitchFrameassemblyontotheshoulderboltsofthetractorframe.Attachthebottomoftheassemblytothetractorhitchusinga5/8"x1-3/4"hexboltanda5/8"nylocknut.
SteP 2: (SEE FIGURE 1)• ProceedtoLIFTASSEMBLYinstructionsonpage8.
LIFT LEVER ASSEMBLY
SLEEVE HITCHFRAME ASSEMBLY
SHOULDERBOLT 5/8" NYLOCK NUT
HEX BOLT 5/8" x 1-3/4"
MOUNTING BRACKET ASSEMBLY
THIS ASSEMBLY IS FOR 247 TRACTOR MODELS ONLY.
8 Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
ASSEMBLY
FIGURE 1
5/8"x 2"HEX BOLT
5/8" NYLOCK NUT
5/8" JAM NUT
5/8"x 1-3/4"HEX BOLT
LIFTING LINK
STEP 1: (SEE FIGURE 1)• Assemblethetwo5/8"jamnutshalfwayontothetwo5/8"x2"hexbolts.ScrewtheboltsintothenutsthatareweldedtotheSleeveHitchLiftAssembly.Tightenthejamnutsagainsttheweldednuts.
• AssembletheLiftingLinktotheSleeveHitchLiftAssemblyusinga5/8"x1-3/4"hexboltanda5/8"nylocknut.UsethebottomholeintheLiftingLink(givesthelowestimplementdepthsetting).Tightenthenutonlyuntilsnug.Donotsqueezeweldedarmstogether.
SteP 2: (SEE FIGURE 2)• AttachtheSleeveHitchLiftAssemblytotheSleeveHitchFrameAssemblyusingthree5/8"x1-3/4"clevispinsand3/32"haircotterpins.
• InstalltheHitchPininthesleevehitchandsecureitwiththe5/32"haircotterpin.
FIGURE 2
(3) 3/32" HAIR COTTER PINS
5/32" HAIR COTTER PIN
HITCH PIN
(3) CLEVIS PINS
LIFT ASSEMBLY
9Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
NOteS
10 Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
• Cleanoffaftereachuse.
• Oilpivotpointsasneeded.
• Storeinadrylocation.
MAiNteNANce
• Movetheliftleverbackwardtolowerthesleevehitch.
• Attachanimplementusingthesleevehitchpin.Tightenthe5/8"x2"stabilizerboltsagainsttheimplementhitchandthentightenthejamnuts.SeeFigure5onPage5.
iMPORtANt:Someimplementsmayrequirethatthestabilizerboltsnotbetightened.Refertoyourimplementowner'smanual.
• Thesleevehitchisassembledinthelowestpositionbyfollowingtheassemblyinstructions.Iftheimplementattachedtothesleevehitchisnotlevelfronttobackduringoperation,movethehexbolttoadifferentholeintheliftinglink(3holesavailable)thatgivesbetterleveling.
OPeRAtiON
• Totowanimplementthathasatowhitch,simplyremovethreeclevispinsandthenremovetheSleeveHitchLiftAssemblyfromtheSleeveHitchFrameAssembly.
• ToremovetheentireSleeveHitchattachment,removethe5/8"x1-3/4"hexboltand5/8"nylocknutwhichfastenthebottomofthesleevehitchtothetractorhitch,thenlifttheattachmentoffthetractor.
11Call1-866-576-8388formissingpartsorassemblyhelpDONOTRETURNTOSTORE
ReF PARt NO. QTY DeScRiPtiON1 67054 1 SleeveHitchFrame2 25715 1 PivotBracket,Left3 25714 1 PivotBracket,Right4 43350 4 Bolt,Carriage3/8-16x1"5 HA21362 4 HexLockNut,3/8-166 65404 1 SleeveHitchLiftAssembly7 64625 1 LiftLeverAssembly8 24732 1 LiftingLinkPlate9 47947 2 Bolt,Hex5/8-11x2"10 712-0242 2 HexJamNut,5/8-1111 HA3980 3 ClevisPin,5/8"x1-3/4"12 47951 2 Bolt,Hex5/8-11x1-3/4"13 712-0261 2 NylockNut,5/8-1114 47950 1 Pin,SleeveHitch
ReF PARt NO. QTY DeScRiPtiON15 43343 3 Pin,HairCotter3/32"16 46471 1 Grip,Plastic17 43063 1 Bolt,5/16-18x1"18 23625 1 Spacer19 47810 1 NylockNut,5/16"20 65370 1 MountingBracket,Right21 65369 1 Mounting Bracket, Left22 714-0117 1 Pin,HairCotter,5/32"23 25685 1 SpacerPlate24 43070 2 FlatWasher25 43087 4 Bolt,Hex3/8-16x1-1/4"26 43003 4 LockWasher,3/8"27 43015 4 HexNut,3/8-16
41362 1 Owner'sManual
RePAiR PARtS FOR MODel 486.24586 Sleeve HitcH
27
14
2
5
6
7
8
11
11
11
12
12
13
14
15
15
22
15
16
A
A
17
1819
3 21
20
25
26
24
9
10
13
23
ASSEMBLYPARtS
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC MC Marque de commerce / MD Marque déposée de Sears Brands, LLC © Sears Brands, LLC
Get it fixed, at your home or ours!Your Home
For expert troubleshooting and home solutions advice:
www.managemyhome.com
For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliancesand items like garage door openers and water heaters.
1-800-4-MY-HOME® (1-800-469-4663)Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)www.sears.com www.sears.ca
To purchase a protection agreement on a product serviced by Sears: 1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparación a domicilio, y para ordenar piezas:
1-888-SU-HOGAR®
(1-888-784-6427)
Au Canada pour service en français:1-800-LE-FOYERMC
(1-800-533-6937)www.sears.ca