4
OWNER’S MANUAL SOUNDBAR DISPLAY MOUNT ADAPTER SM-SBAR-BKT-UNIV

OWNER’S MANUAL SOUNDBAR DISPLAY MOUNT ADAPTER€¦ · but can be used with any other manufacturers’ models. DEPTH ADJUSTMENTS HEIGHT ADJUSTMENTS Soundbar Display Display Soundbar

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: OWNER’S MANUAL SOUNDBAR DISPLAY MOUNT ADAPTER€¦ · but can be used with any other manufacturers’ models. DEPTH ADJUSTMENTS HEIGHT ADJUSTMENTS Soundbar Display Display Soundbar

OWNER’S MANUAL SOUNDBAR DISPLAYMOUNT ADAPTER

SM-SBAR-BKT-UNIV

Page 2: OWNER’S MANUAL SOUNDBAR DISPLAY MOUNT ADAPTER€¦ · but can be used with any other manufacturers’ models. DEPTH ADJUSTMENTS HEIGHT ADJUSTMENTS Soundbar Display Display Soundbar

pg.2

SM-SBAR-BKT-UNIV Assembly Manual

ADJUSTING THE BRACKETThe SM-SBAR-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth and height relative to the display. This is achieved by a sliding Tray bracket and by changing the orientation of the Hook bracket.

NOTE: This Strong™ bracket has been designed to work with any Episode® Soundbar products but can be used with any other manufacturers’ models.

DEPTH ADJUSTMENTS

HEIGHT ADJUSTMENTS

Soundbar

DisplayDisplay

Soundbar

Display

Soundbar

Soundbar

Display

Soundbar

DisplayDisplay

Soundbar

Display

Soundbar

0.75in. (0.75 in.)

5.51in. (5.51 in.)

1.79in.

0.75in. (0.75 in.)0.33 in.

Page 3: OWNER’S MANUAL SOUNDBAR DISPLAY MOUNT ADAPTER€¦ · but can be used with any other manufacturers’ models. DEPTH ADJUSTMENTS HEIGHT ADJUSTMENTS Soundbar Display Display Soundbar

pg.3 © 2014 STRONG

SM-SBAR-BKT-UNIV Assembly Manual

ASSEMBLY STEPS1.Install the Hook Brackets to the rear of the display. Once installed, the brackets will be between the

display and the wall mount.

NOTE: On larger displays only the bottom screw will be used.

2. Insert the Tray brackets into the rear of the Hook Brackets. Keep the set screws loose to allow for adjusting the depth of the soundbar once installed in step 3.

3. Cut the provided Trim piece (optional) to the width of the sound bar. Use as needed.

4. Secure the Trim piece (optional) to the soundbar via the the Trim piece.

attached

adhesive on

Page 4: OWNER’S MANUAL SOUNDBAR DISPLAY MOUNT ADAPTER€¦ · but can be used with any other manufacturers’ models. DEPTH ADJUSTMENTS HEIGHT ADJUSTMENTS Soundbar Display Display Soundbar

SM-SBAR-BKT-UNIV Assembly Manual

5. Attach the Soundbar to the installed Tray brackets and secure with the screws provided with the Episode™ soundbar.

6. Adjust the soundbar to the desired depth in relation to the display.

7. Tighten the set screw for each tray bracket. If using a non Episode™ soundbar, verify that screws have been provided by the manufacturer.

All Strong™ products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to

repaired under this warranty must be returned to SnapAV or a designated service

LIFETIME LIMITED WARRANTY

Lifetime

For Technical Support : 1.866.838.5052

© 2014 STRONG140914