OWNER S MANUAL - CARiD...Two Preloaded 8.8" Wide Touch Screen Universal Replacement Headrest Monitors Package OWNER S MANUAL HDVD-9BK SD USB AV2 HDVD-9BG HDVD-9GR HDVD-9GRDK Specifications

Two Preloaded 8.8" Wide Touch Screen UniversalReplacement Headrest Monitors Package

OWNER S MANUAL

HDVD-9BK

AV2SD USB

HDVD-9BG HDVD-9GR HDVD-9GRDK

Specifications

DC 12V

9W

8.8 TFT-LCD

16 :9 Wide

1440x234

DVD-AV1-AV2

Ac t i ve Ma t r i x TFT

Power Requirements

Power Consumption

Screen Size

Screen Format

Resolution Pixel

A/V Input

Dimensions(With shroud)

LCD Panel Type

Compatible video standard NTSC/PAL au to se lec t

Note : This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

11 .6 (L )X8 .7 (W)X4 .7 (H ) i nches

1 EAA/V Output

Caution

Please read and observe all warnings and instructions in this manualand those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

WARNING

WARNING

CAUTION

The lightning bolt with arrowhead inside in an equilateraltriangle is intended to alert the user to the presence of

dangerous voltage within the product s enclosure that may beof sufficient magnitude to constitute a risk of electric shock topeople.

The exclamation point inside an equilateral triangle is intendedto alert the user to the presence of important operating andmaintenance (servicing) instructions in the literature accompanyingthe product.

Installation of all TV monitorsmust be out of the driver sfield of vision.

Do not try and service theseproducts yourself, aqualified service center orfactory service center for allrepairs.

locale

Be careful not to drop orapply under pressure to thefront panel of your videomonitor. If the screen cracksdue to misuse, your warrantywill be void!

Do not mount the product whereit will obstruct the deployment ofthe airbag or in an area where itwould affect the driver s abilityto control the vehicle. Also becareful to avoid mounting theproduct where it can becomehazardous during sudden stopsor in the event of an accident.

Use extra caution with any liquidsin your car. If you or your childspills any liquid on these products,pull your vehicle to the roadsideand turn the key off to disconnect

or wipe the products with a towel. Do notoperate the equipment until all liquids haveeither evaporated or you have had the monitorinspected at a service center by a qualifiedtechnician. Severe harm or danger can result.

Use only a damp cloth to cleanthe screen and use only purifiedwater on the cloth. wring out allexcess water prior to wiping thescreen. Do not use any cleanersor chemicals to clean the screen.In most cases a dry cloth will do!

POWER AV MENU

,

,

Troubleshooting

Symptom Items to Check Actions to be Taken

Remote control doesnot work properly.

Is the power turned on?

Is the audio which is connected withthe audio cable set to receivethe DVD signal output?

Is audio cable connected securely?

Is the monitor which is connectedwith the audio cable turned on?

Is the audio output setin the correct position?

Is the remote control facingthe remote sensor?

Is the distance too far?

Is there any obstacle in the middle?

Is the battery weak?

Check the car battery capacity.

Select the correct input mode for the audio receiver.

Connect the audio cable into the jacks securely.

Turn on the monitor connected with the audio cable.

Set the Audio Output to the correct position,and then turn on the DVD player again by pressingthe POWER button.

Point the remote control toward the remote sensor ofthe product.

Use the remote control within 15 feet.

Remove the obstacle.

Replace with new battery.

Buttons do not work.

No sound

When a disc is brought from a cold environment to a warm one, there may be moistureon the the disc, or condensation on the pickup lens. It will affect disc playback.

1. Remove the disc from the DVD player.2. Turn on the power and leave it on for an hour to vaporize the condensation.

Moisture or condensation on lens

Quality installations are best

performed by qualified and

certified installers.

Don t touch the unit if there isa flash of lightning. You mayreceive an electric shock.

Do not cover or stop up heaterducts or vents. It may cause afire or receive an electric shock.

Watching the monitor for anextended period of timewithout the engine runningmay deplete the vehicle sbattery charge.

This product is designed foroperation with a 12 Volt DC,negative ground vehicle. Itis not suitable for operationunder other conditions orvoltages.

CAUTION

Operating Notes

Do not bring magnetic devicessuch as credit card or magneticcard near the magnets.

1. The operating temperature of this product is limited to 14 ~+140 F.

2. If your vehicle is extremely hot or cold you must allow time for your air

conditioner or heater to cool or heat the vehicle until operating temperatures

have returned to normal operating ranges.

3. Optimal picture quality is achieved when viewed from directly front of the

monitor (+/-30degrees).

4. Do not open the housing and attempt to make any repairs yourself. Refer

servicing to qualified personnel.

5. DVD Players use an invisible laser beam which can cause hazardous radiation

exposure. Be sure to operate the unit correctly as instructed.

6. Do not cut the car power supply off while a disc is playing. It can cause

damage to the DVD Player.

7. If the buttons get stuck, please try to press the up of buttons, it will get back.

It won't impact using normal.

8. If you cann't find the files name in list when playing, please reset units or

turn off/on over again.

9. If the unit cann't be change mode when playing some special files which the unit

didn't support, please reset units or turn off/on over again.

CautionDisc Information

DVD features

DVD discs provide high-resolution images with high-quality sound. This DVD playercan play not only DVD discs of various versions, but also S-VCD, VCD, audio CD andMp3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. Inaddition, a CD or a CD-RW which was recorded on special software cannot be played.

Region code

Your DVD player is designed and manufactured to region management informationthat is recorded on a DVD disc. Please check the region code.1: North America 2: Japan 3: Korea and Southeast Asia4: Australia, Mid & South America 5: Russia 6: China

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information).Don t stick a label or a glue-based note on either side of the disc.Don t use discs that have glue or a damaged label with exposed adhesive residue.It might result in damage to your DVD player.Don t put discs in the sunshine.Park your car in the shade.

How to handle the discs

Only use round discs. Discs with other shapes like a star, a heart, etc. may causedamage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dryone. Before playback, wipe the disc outward from the center with a clean cloth. Do notuse any type of solvent such as thinner, benzene, commercially available cleaners orantistatic spray. To avoid damaging your DVD player, don t use a scratched disc.

How To Control The Monitor

AV2SD USB

1. Power On/Off

<Unit>

To power on the unit, press POWER button on the monitor;or press POWER button on the remote control.

AV2SD USB

To power the off unit, press MPWR or PWR on the monitor;or press POWER button on the remote control.

2. Mode Change

MENU MODE MPWR

AV2SD USB AV2

SD USB

PLAY

MENU

STOP

PREV

NEXT PWR

VOL-

MODE

VOL+

(1) Press any place on the monitor screen with your finger softly ,and you will see the MODE button on the monitor .

(2) Press the MODE button to change an Input Mode.(AV1-AV2-DVD)

AV2SD USB

PLAY

MENU

STOP

PREV

NEXT PWR

VOL-

MODE

VOL+

AV2SD USB

MODEMENU MPWR

1

2

Installation

Product installed

AV2

1. Remove the existing headrest from the seat.

2. Adjust the posts of the new headrest to fit the holes in the seat where theheadrest will be installed. The post can be moved together or apartgrasp one post in each hand, move the posts in opposing directions(like they were walking) while pushing them toward each other or awayfrom each other.

3. Insert the cable in the proper hole. Insert the posts into the holes in theseat and carefully work the headrest into position. Make sure the cableis not pinched.

4. Run the cable down the seat and out to the location of the video sourceunit (such as a DVD player).

5. See the picture on the right and you can adjustthe distance between the tubes to requiredspace(pole width adjustments 4 ~ 8.2 .)

How to use the Adapter tubes

Since the spacing of the mounting holes

can vary on different veicles we supply

two adapter tubes. Use these tubes when

the headrest mounting holes in your seat

are too large for the posts of the headrest

monitor.

AV2SD USB

SDUSB

AV2SD USB

MENU MODE MPWR


3. Picture Control Menu

AV2SD USB

MODEMENU

MENU

CONTRASTBRIGHTNESSCOLORFMRESET

50

(1) When the MENU button on the monitor screen is

pressed, the picture setting menu will be shown.

(2) Use to achieve the desired settings for

CONTRAST,BRIGHTNESS, COLOR,

FM and RESET.

CONTRAST : Contrast between light and shade

BRIGHTNESS : Dim Bright

COLOR : Control of color

SHARPNESS : Sharpness of view

FM : 87.7 89.1MHz

RESET : Brings its factory defaults

(3) Press the button continuously to highlight

the desired picture setting menu to control, and

adjust the values with the left /right arrow buttons

while menu OSD is still displayed on the screen for

changing the values.

(4) When using a Remote Controller, press MENU button

on the Remote Controller to bring out the menu, and

adjust the values.

MENU

If there is no more touch control for 5 secondswhile any buttons or the Picture Control Menuare being shown on the monitor, all buttons &menu will be disappeared automatically.

Note

AV2SD USB

3. Description of Remoto Control Menu for DVD Player

PLAYPlay DVD

STOPStop DVD play

PREVMove to the previous

chapter or track

NEXTMove to the nextchapter or track

PLAY

STOP

PREV

NEXT PWR

VOL-

MODE

VOL+

VOL-Volume Down

VOL+Volume Up

MODE

PWRDVD PlayerPower On/Off

MENU

MENUBrightness

ContrastTint

ColorSharpnss

Reset

Use these buttons to select either fastforward or fast reverse playback.

Connection Diagram

Connect the wires as indicated:

a. Red: Connect to a switched(+) 12 volt source (ACC). Use a lead that has(+) 12Vwhen the ignition on or in the ACC position so the monitors turns off when the key isin the off position. Wiring the monitors hot could cause your battery to run downwhen the engine is not running.b. Black: Connect to a good chassis ground.c. Reversing the polarity of the red and black leads will damage the monitor.d. Connect the video input connector to the video output from the source unit(i.e. DVD player)e. Test the syetem.

AV2SD USB

RF Wireless Stereo Headphone

(A CH:914MHz B CH:915MHz)

VIDEO OUTPUT

AUDIO OUTPUT

AUDIO OUTPUT

VIDEO INPUT

AUDIO INPUT

AUDIO INPUT

AV1 AV2 DVD


1 2 3 4 5 6 7

88

AV2SD USB

Headphone output

Adjustable steel Pipe

PIPE

AV2 Inputs

HEADPHONE JACK

STOP

When this button is pressed,playback is stopped.

9 10

SD Inputs

USB Inputs

9

10

SD/USB Functions

1. When USB or SD is inputed, the monitor will be displayed as shown below. But whenyou input USB that the function can not change into SD state (only the SD ismoving). And you can select the desired menu by

2.

pressing the MODE button on theremote control of monitor.

Use the (arrow and ENTER) buttons to select and set desired settings.

00:00

000/003

00:00 kbps

S

\

..

..

REMOTE IR SENSOR11

11

Remote ControDVD Functions

PBC

[DVD]/[AUDIO]/[MP3]

[VCD]

You can turn the PBC (Play Back Control) function on or off by pressing this button.When PBC is loaded, the PBC function is enabled automatically. This function issimilar to selection of DVD title. Please note that this function does not work withMP3 dics.

Zoom

[DVD]

Some DVDs are programmed to allow you to zoom intothe image, magnifying it. Pressing the ZOOM buttondoes this in steps, according to the chart to the right.

[VCD]/[AUDIO]/[MP3]

GO TO

The GO TO function allows you to begin playback at a specific location on the disc. Todo this, press GO TO and navigate the screen which follows to select this playbacklocation.

TitleMove to the desired title.

Chapter

Move to the desired chapter.

AudioSelects the desired audio output.

SubtitleSelect the desired subtitle.

Angle

Watch the different view angle.

TT TimeTotal time.

CH TimeChapter time.

Repeat

Sets the repeat play.

Time Display

Watch play time.

OSD

2 X

3 X

4 X

1 / 2

1 / 3

1 / 4

ZOOM X 2

CONDITION

ZOOM X 3

ZOOM X 4

ZOOM X 1 / 2

ZOOM X 1 / 3

ZOOM X 1 / 4

Off

Menu

Title

Chapter

Audio

Subtitle

01 / 0201 / 02

06 / 6106 / 61

5.1CH Chinese5.1CH Chinese

OFF

Bitrate 31Bitrate 31 Title Elapsed 0:20:02Title Elapsed 0:20:02

This button does not function in PBC mode.

This button does not function in this mode.

Remote Control

Turns the DVD Player/Monitor on or off.

(IPOD) (not function in this unit)

DVD AV1 AV2

AV SELECT

P/N

This button permits you to chooseamong Multi, PAL and NTSC.

Use to move to the desired menu.

DISPLAY

Press to show elapsed or remainingtime of a chapter or a title.

NUMERIC button

Use when making a selection on themenu screen.

MODE

DVD SD USB

POWER1

2 MUTE

Press this button to switch off theaudio during playback. Press againto restore the audio.

3

VOL-/VOL+ (not function in this unit)

MENU (OSD on monitor)

Press this button to open the on-screen menu system to setup andcontrol various parameters of themonitor and DVD player.

UP/DOWN

MENU (DVD menu)

This button permits you to view themenu on the DVD.

SUBTITLEUse this button to select the menufor choosing a subtitle language.

TITLE (Title menu)

When a DVD is playing, press thisbutton to view the Title Menu.

PBC (Video CD only)

Press this button to access the specialPlayback Control functions for VCD2.0 format Video CD S.

Use this button to switch betweenthree modes

To start playback of iPOD, pressthis button. Press again to pausethe playback. If playback is paused,press this button to resumeplayback.

RIGHT( )/LEFT( ) ARROWS(not function in this unit)

Use to incease or decreasevolume level.

Use these buttons(press once)to skip to the next or last track,chapter or file on the iPOD inthe player. But if you use thesebuttons (press continuous) toselect either fast forward or fastreverse playback.

MONITORiPOD

Vol+

Vol-

Remote Control DVD Functions

Repeat

Pressing REPEAT button changesthe play mode as follows:

[DVD]

OSD CONDITION

Chapter

Title

All

Repeat chapter

Repeat title

All

Repeat off

[VCD]

The REPEAT button does not functionwhen a VCD disc is being played.


[AUDIO]

OSD CONDITION

Track

All

Repeat single

All

Repeat off

[MP3]


OSD CONDITION

Repeat One

Repeat Folder

Folder

Single

Repeat folder

All

Random play

Shuffle

Random

Single

Repeat folder one time

Single play

NTSC/PAL

This button is used to select the video standard for the DVD mode between NTSCand PAL formats.

Angle

Some DVD s are recorded with additional footage which allows you to view a scenefrom a different camera angle. If the ANGLE feature is enabled in the Setup Menu(see page 14) and the disc has this option,an angle mark will be displayed onthe screen. When that occurs, press the ANGLE button to see these alternate viewingangles.

A-B (repeat from A to B)

VOL-/+ button

AUDIO

ENTER

ZOOM

UP/DOWN/RIGHT/LEFT ARROWS

PLAY/PAUSE

GO TO

STOP

SKIP FORWARD/BACK

FAST FORWARD/REVERSE PLAY

Use these buttons to select either fastforward or fast reverse playback.

Use this button to select the beginningand end of a track which you wish to haverepeat in playback.

Use to incease or decrease volume level.

Use this button to select one of theaudio soundtracks programmed on aDVD disc. It is alse used to select theaudio output mode for the DVDplayback.

Press this button to confirm the itemyou have found and highlighted usingthe arrow buttons. Usually this is doneto confirm a selection or item to beplayed on the DVD.

If your DVD disc supports zooming into see the program differently, pressingthis button will enable you to changethe amount of zoom.

Use thes buttons to navigate thevarious menus and screens for themonitor and DVD systems.

To start playback of a disc, press thisbutton. Press again to pause theplayback. If playback is paused, pressthis button to resume playback.

Use to search for a title or a chapter onyour DVD disc.

Press this button to stop the playbackof the current disc.

Use these buttons to skip to the nextor last track, chapter or file on thedisc in the player.

RETURN

SETUP

Press this button to display the Setupmenu. The Setup menu enables youto enter the settings required for theunit to work properly.

REPEAT

Press this button to change the playbackmode to repeat.

Press this button to return to the root menu.

Power And Mode Selection

How to Swivel The Monitor

You can adjust the swive l angle as shown below.

How to Watch The Monitor

UNIT REMOTE CONTROLLER

1. Connect the monitor to the external devices.

2. Press the button on either the remote control or the unit once to turnthe power on.Press the same button to turn the power off.

POWER

POWER

3. Turn on the external devices and view.

DVD Functions

Prev( )

Press this button to advance the player from the current chapter.

to the previouschapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move to the previous track.

Next( )

Press this button to advance the player from the current chapter .to the next chapter

[DVD]/[VCD]

[AUDIO]/[MP3]

Press this button to move from the current track .to the next track

Repeat(A-B)

You can set the player to repeat a segment over and over until you cancel it. To dothis, you mark the beginning of the desired segment (A) and the end of segment (B).The selected segment will berepeated automatically until canceled.

[DVD]/[VCD]/[AUDIO]

OSD CONDITION

A

A B

Start point of repeat

Ending point repeat function

Make this arrow to swivel the monitor

AV2

SDUSB

Power and Mode Selection

Selecting an AV mode

1. Turn the power ON on the unit and on the external devices.

2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button onthe unit or on the remote control.

3. Play the external device.

DVD Functions

Fast Reverse Searching( )

Pressing FR button repeatedly changesthe play mode as follow:

[DVD]

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewind search

4X rewind search

Pressing FR buttonchanges the play mode as follow:

repeatedly

[AUDIO]

[MP3]Pressing FR buttonchanges the play mode as follows:

repeatedly

FR 16X

FR 32X

PLAY

8X rewind search

16X rewind search

32X rewind search

Play

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewind search

4X rewind search

FR 16X

FR 32X

PLAY

8X rewind search

16X rewind search

32X rewind search

Play

OSD CONDITION

FR 2X

FR 4X

FR 8X

2X rewind search

4X rewind search

FR 16X

FR 32X

PLAY

8X rewind search

16X rewind search

32X rewind search

Play

Fast Forward Searching( )

Pressing FF button changesthe play mode as follow:

repeatedly

[DVD]

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forward search

4X searchforward

Pressing FF buttonchanges the play mode as follow:

repeatedly

[AUDIO]/[VCD]

[MP3]Pressing FF buttonchanges the play mode as follows:

repeatedly

FF 16X

FF 32X

PLAY

8X searchforward

16X searchforward

32X searchforward

Play

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forward search

4X searchforward

FF 16X

FF 32X

PLAY

8X searchforward

16X searchforward

32X searchforward

Play

OSD CONDITION

FF 2X

FF 4X

FF 8X

2X forward search

4X searchforward

FF 16X

8X searchforward

16X searchforward

FF 32X

PLAY

32X searchforward

Play

Picture Control

FM

87.7

(FM function added 87.7 87.9 88.1 88.3 88.588.7 88.9 89.1MHz)

To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button untilyou arrive at the screen for that item. Use the arrow buttons to adjust the value.Press the MENU button to make another adjustment or leave the MENU system.

Contrast/Brightness/Color/FM

CONTRAST

BRIGHTNESS

COLOR

50

1. Bring up the on-screen function menu by pressing the MENU button on the unitor the remote control.

2. Press the MENU button on the unit or the remote control of monitor until you seethe item you wish to adjust.

3. Use the arrow buttons to adjust the value.

4. Press the MENU button to make another adjustment or leave the MENU system.

DVD Functions

Subtitle(SUB-T)

This button is used to select the language for the on-screen display system.(This title menu may vary, depending on the particular DVD.)

[DVD]

OSD

1 / 2

Title

Slow( )

Used to display the title menu of the loaded DVD disc.This function is only present on discs which support it.

[DVD]

[DVD]/[VCD] CONDITION

1 / 4

1 / 8

2X slow forward

4X slow forward

8X slow forward

Use this button to play a disc in slow-forward orslow-reverse. Slow playback can be done at fivedifferent speeds. Pressing this button repeatedlydecreases the speed in steps. Pressing a sixthtime returns playback to the normal speed. 1 / 16

1 / 2

1 / 4

1 / 8

1 / 16

Play

16X slow forward

2X slow rewind

4X slow rewind

8X slow rewind

16X slow rewind

Play

1 / 32 32X slow forward

1 / 32 32X slow rewind

50

50

DVD Functions

Display

Pressing the DISPLAY on theremote control changes the play mode asfollows:

button

[DVD]

OSD CONDITION

Title Elapsed

Title Remain

Chapter Elapsed

Display the Title Elapsed

Display the Title Remain

Display the Chapter Elapsed

[VCD]

Whenever press the button,title chapterwill be displayed as follows:

Pressing the display button displaysinformation about the current CD on thescreen as follows:

[AUDIO]

OSD CONDITION

Single Elapsed

Single Remain

Display the single elapsed

Display the single remain

Display the total elapsed

[MP3]Your DVD player will display the counterautomatically when you play the MP3 disc.

Number Buttons

The 0 through 9 number buttons are used to enter the number of the track, the numberof the DVD chapter, the time, the date, etc.

OSD CONDITION

Single Elapsed

Single Remain

Display time

Left display time

No sign

Chapter Remain

Display Off

Display the Chapter Remaining

No sign

Display Off

Total Elapsed

Total Remain Display the total remaining

[DVD]

Select a track by pressing thecorresponding number button.

[AUDIO]

You can select a track in the folder bypressing the corresponding number button.

[DVD]

OSD CONDITION

Select Track:__ Select track no

OSD CONDITION

__:__ Select track no

DVD Setup

Setup Menu-Main PageWhen the button is pressed, the setup menu will be displayed as shownbelow. Select the menu category and make changes according to your preferences.

SETUP

1. Press the button if the disc is playing.STOP

2. Press the button to display setup menu.SETUP

3. Use the (arrow and ENTER) buttons to select and set desired settings.

4. Press the button again to turn off the setup menu.SETUP

TV DisplayTV DisplayAngle MarkAngle MarkOSD LangOSD Lang

Screen SaverScreen Saver

PSOnENG

On

Go To General Setup PageGo To General Setup Page

General Setup PageGeneral Setup Page

DVD Functions

Stop( )

In DVD mode, Press STOP to stop playback.To resume playback, press PLAY/PAUSE. Ifyou press STOP and then PLAY/PAUSE twice,the player will begin playback at the firstscene of the movie.

[DVD]/[AUDIO]

In MP3 mode, Pressing STOP will stopaudio playback. Press PLAY/PAUSE to beginplayback of the first title on the disc.

the

[MP3]

Menu

Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,depending on the programming of the disc.

[DVD]

OSD CONDITION

1 Time Press Play Key To Continue Stop

OSD CONDITION

1 Time Stop Stop

Arrows( / / / )

In addition to navigating the various menus, you can use the arrow buttons to define the areaof the screen you want to enlarge in ZOOM mode.

[DVD]

After pressing STOP button, select the desired folder and set the condition by pressingENTER button.

Disc Stop2 Time

Setup

Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVDsettings to suit your equipment and preferences.

[MP3]

DVD Setup

General Setup1. TV Aspect RatioIn the Setup function called TV Display, you set the player to output the video signal at thesame aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B(Letterbox).

Normal / PS 4:3 PAN SCANChoose this setting if you want the movie to fill the entire screen.(This might mean that the left and right edges won t be seen)

Normal / LB 4:3Choose this setting if you want to see the movie in its original aspect ratio.(The movie might appear with black bars at the top and bottom of the screen.)

Wide 16:9 WIDE SCREENChoose this setting if your DVD Player is connected to a widescreen TV.(This opition is available only if the disc has a 16:9 display aspect ratio.)

2. Angle ViewingSome DVD discs contain programming which allows youto view a scene from a few different camera angles. Youcan tell when a scene is so recorded when an Angle Markis displayed on the screen. This mark will only appear if youhave enabled the Angle Mark featurein the DVD Setup menu.

On: When selected, the screen will be shown withangle mark.

Off: When selected, no angle mark is shown onthe screen.

3. OSD Language

Use this option to set the OSD language.When selected, change to set the on-screen displaylanguage.

Angle MarkAngle MarkOSD LangOSD Lang


OnENG

On

Set TV Display ModeSet TV Display Mode


Normal/LBWide

TV DisplayTV Display PS Normal/PS

OSD LangOSD LangScreen SaverScreen Saver

ENGOn

Set Angle MarkSet Angle Mark


Off

TV DisplayTV Display PSAngle MarkAngle Mark On On

Screen SaverScreen Saver On

Set OSD LanguageSet OSD Language


TV DisplayTV Display PSAngle MarkAngle Mark OnOSD LangOSD Lang ENG

English

Korean

French

German

Italian

Spanish

Portuguese

Dutch

English

Korean

French

German

Italian

Spanish

Portuguese

Dutch

DVD Functions

Eject

Audio

Change the audio output format.(A the disc supports available audiotype.)

vailable only if

[DVD]

Changes the audio output format.(Available only of the disc supports available audiotype.)

[VCD]/[AUDIO]

OSD CONDITION

Mute Mute

Mute offMute off

Vol+/Vol-

Use these buttons to adjust the audio output level of the speaker from 0 to 20.

Mute

Press MUTE to turn off the audio part of thecurrently playing program. Press it again toreturn the audio volume to the level at whichyou were last listening.

OSD CONDITION

Play Disc

Pause

Play or Pause( )

When this button is pressed, the disc is ejected. When this button is pressed for morethan 3 seconds, the disc is unconditionally ejected. Use this function if you encounterdifficultly ejecting a disc.

An invalid button press.

[MP3]

OSD CONDITION

2 Channel

5.1 Channel

1 / 2 : Ac3 2CH English

2 / 2 : Ac3 5.1CH English

OSD CONDITION

Stereo

Mono Left

Stereo

Mono Left

Mono Right

Mix Mono

Mono Right

Mix Mono

Whenever this button is pressed, the modeswitches from pause to play or play to pause.

DVD Setup

Audio Setup

4. Screen Saver

The screen saver is useful to prevent your displayfrom becoming damaged. The screen saver pictureappears when you leave the DVD player in stop modefor about two minutes.

Angle MarkAngle MarkOSD LangOSD Lang

OnENG



TV DisplayTV Display PS

Go To Speaker Setup PageGo To Speaker Setup Page

Audio Setup PageAudio Setup Page

Speaker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

Speaker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

OffScreen SaverScreen Saver On On

Dual MonoUse this function to set the input audiosignal to match your speaker setup.

DynamicUse this function to change the settingfrom the factory.

Set DRC OffSet DRC Off

Dual MonoDual Mono STR

Dynamic

Dolby Digital SetupDolby Digital Setup

L-MonoR-Mono

Dual MonoDual Mono Stereo

Mix-Mono


Dynamic

FULL

3 / 4

1 / 2

1 / 4

OFF

1. Dolby Digital Setup

Dynamic

Dual Mono (1 + 1) SetupDual Mono (1 + 1) Setup


L-MonoR-Mono

Dual MonoDual Mono STR Stereo

Mix-Mono

DVD Setup

Show below are two examples of Audio Setups.

Go To Dolby Digital SetupGo To Dolby Digital Setup


Speaker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

Speaker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

Set Stereo SetupSet Stereo Setup

STR

Go To Equalizer PageGo To Equalizer Page


Speaker Setup

Spdif Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

Speaker Setup

Spdif Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

2. Equalizer Settings

Bass BoostBass BoostSuper BassSuper BassTreble BoostTreble Boost

OffOffOff

Select Equalizer TypeSelect Equalizer Type

Equalizer PageEqualizer Page

RockPopLiveDanceTechno

ClassicSoft

EQ TypeEQ Type None None

DVD Setup

Password Setup1. Password Mode

In the Password setup, you must first enter the current 6-digit passcode, andthen you have the opportunity to change it. The factory default passcode is .Once you have changed and confirmed the password, press the ENTER button.

136900

2. Password Change

Password

Password ModePassword Mode

Password Setup PagePassword Setup Page

OffPassword Mode OnPassword Mode On On

Change PasswordChange Password

Password Setup PagePassword Setup Page

Password Mode OnPassword Mode On OnPassword Change Old Password

New Password

Confirm PWD

OK

Password Setup, which is required for using the Parental Controls settings,is divided into two modules: Turning on the Password function, and settinga Password. The first step is to turn it on in the Password Mode setting.

Please Enter Old PasswordPlease Enter Old Password

DVD Setup

EQ Equalizer TypeIn this menu you can choose the desired presetequalizer mode.

(Choose from Rock, Pop, Live, Dance, Techno,Classic or Soft)

Bass BoostThe Bass Boost function increases the volumelevel of the bass frequencies.

Super BassSuper Bass Boost further increases the volumelevel of the bass frequencies.

Treble BoostTreble Boost increases the volume level of the upperfrequencies.

Bass BoostBass BoostSuper BassSuper BassTreble BoostTreble Boost

OffOffOff

Select Equalizer TypeSelect Equalizer Type


RockPopLiveDanceTechno

ClassicSoft

EQ TypeEQ Type None None

Super BassSuper BassTreble BoostTreble Boost

OffOff

Boss BoostBoss Boost


EQ TypeEQ Type None

OffBass BoostBass Boost Off On

Treble BoostTreble Boost Off

Super BassSuper Bass


EQ TypeEQ Type None

Off

Bass BoostBass Boost OffOnSuper BassSuper Bass Off

Treble BoostTreble Boost


EQ TypeEQ Type None

Off

Bass BoostBass Boost Off

OnSuper BassSuper Bass OffTreble BoostTreble Boost Off

DVD Setup

Use the Disc Menu option to select the displaylanguage for a DVD s disc menu display language.(not the same as the players menu)

1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Disc Menu.4. Press the ENTER button.5. Press the / buttons to select Disc Menu.

5. Disc Menu

The Parental Control settings limit the player to only play content at or below a certainmovie rating. The ratings systems in different countries vary. In the USA, the MotionPicture Association of America(MPAA) rates movies as G, PG, PG-13, etc.In this menu item, you can set what is the highest level of rating you wish to allow theunit to play.

1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Parental.4. Press the ENTER button.5. Press the / buttons to select desired

parental level.

6. Parental

If you select RESET when in the DEFAULT settingsmode, all the settings of the Setup Menu will bereturned to the factory defaut settings, except forParental Level, Region and Password values.

1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Default.4. Press the ENTER button to select Reset.

7. Default

PBCAudioSubtitle

OnENG

Preferred Menu LanguagePreferred Menu Language

Preference PagePreference Page

FrenchSpanish

TV TypeTV Type Ntsc English

ParentalDefault

JapaneseKorean

Chinese

ThaiRussian

Disc MenuDisc Menu ENG

PBCAudioSubtitle

OnENG

Load Factory SettingLoad Factory Setting


TV TypeTV Type Ntsc

Disc MenuDisc Menu ENGParental

ResetDefault

PBCAudioSubtitle

OnENG

Set Parental ControlSet Parental Control


TV TypeTV Type Ntsc 1 KID SAF

2 G

3 PG

4 PG 13

5 PGR

6 R

7 NC17

8 ADULT

1 KID SAF

2 G

3 PG

4 PG 13

5 PGR

6 R

7 NC17

8 ADULT

ParentalDefault


DVD Setup

Video Setup

Sharpness can be adjusted by highlighting it in the menu and then using theUP/DOWN arrow buttons to increase or decrease the sharpness.

In the Video Setup, you can make adjustments to various elements of the picture quality.

BrightnessContrastGamma

0000None

Color

Video Quality SetupVideo Quality Setup

MediumLow

Color MID High

HueSaturationLuma DelayLuma Delay

00001 T1 T

Picture Quality

Video Setup PageVideo Setup Page

Component YUV

Quality

Divx VOD

Component YUV

Quality

Divx VOD

Go TO Video Quality Setup PageGo TO Video Quality Setup Page


0000None

Color


MediumLow

Color MID High


00001 T1 T

BrightnessUse this option to adjust the display brightness. When you reach desiredbrightness level, use the / buttons and press the ENTER button.



00001 T1 T

Brightness

Brightness 0


0000None

Color MID

Brightness

DVD Setup

Preference1. TV TypeChoose the proper TV format appropriate to themonitor you have connected to the player fromthe following: NTSC, PAL or Multi type.

1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to TV Type.4. Press the ENTER button.5. Press the / buttons to select TV Type.

2. PBC (Play Back Control)This feature is only available when a SVCD discis loaded. It allows you to disable or enable thePBC (Play Back Control) menu of VCD discs.

1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to PBC.4. Press the ENTER button.5. Press the / buttons to select TV TypeOn/Off.

3. AudioUse the audio language menu to select the subtitlelanguage that you prefer. If the disc you are playinghas that language available, it will display subtitlesin that language.

1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Audio.4. Press the ENTER button.5. Press the / buttons to select desired

audio language.

4. SubtitleIn the Subtitle menu, you can select a subtitlelanguage. Please note that subtitle will onlyappear in this language if the disc programminghas included it.

1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Subtitle.4. Press the ENTER button.5. Press the / buttons to select desired

subtitle.

PBC

Subtitle

On

Preferred Audio LanguagePreferred Audio Language


FrenchSpanish

TV TypeTV Type Ntsc English

ParentalDefault

JapaneseKorean

Chinese

ThaiRussian


Audio ENG

PBCAudio

OnENG

Preferred Subtitle LanguagePreferred Subtitle Language


FrenchSpanish

TV TypeTV Type Ntsc

ParentalDefault

JapaneseKorean

Chinese

RussianDisc MenuDisc Menu ENG

Subtitle

Thai

Others

Thai

Others

AudioSubtitle

ENG

Set PBC StateSet PBC State


TV TypeTV Type NtscOn

ParentalDefault


Off

PBC On

PBCAudioSubtitle

OnENG

Set TV StandardSet TV Standard


ParentalDefault


PALMultiNTSC

TV TypeTV Type Ntsc

Contrast

Use this option to adjust the contrast level.Use the / buttons and press the ENTER button, when you reach thedesired contrast level. The contrast control increases or decreases the ratio ofbright and dark screen sections.

Brightness

Gamma

00

None

Contrast


Color MID


00001 T1 T

Contrast 00

Contrast

Contrast 0

DVD Setup

Gamma

HueSelect screen hue level using the direction / buttons and press the ENTER button.

BrightnessContrast

0000

Gamma


MediumLow

Color MID


00001 T1 T None

Gamma None High

BrightnessContrast

0000

Hue


Color MID

SaturationLuma DelayLuma Delay

001 T1 T

Gamma NoneHue 00

Hue

Hue 0

In some systems, you might experience a loss in the strength of the dark sections ofthe displayed picture. This can be helped by changing the Gamma setting, whichboosts the dark level but leaves the other levels unchanged.

DVD Setup

SaturationSelect screen saturation level using the direction / buttons and press theENTER button.

Luma DelaySelect the Luma Delay menu and select the preferred video image quality.

BrightnessContrast

0000

Saturation


Color MID

Luma DelayLuma Delay 1 T1 T

Gamma NoneHue 00Saturation 00

Saturation

Saturation 0

BrightnessContrast

0000

Luma DelayLuma Delay


Color MID

Gamma NoneHue 00Saturation 00Luma DelayLuma Delay 1 T1 T 0T

1 T1 T

POWER ACOUSTIK AUDIO ACCESSORIES CAR AUDIO ACCESSORIES

http://www.carid.com/power-acoustik/

http://www.carid.com/audio-accessories.html

Documents

OWNER S MANUAL - CARiD...Two Preloaded 8.8" Wide Touch Screen Universal Replacement Headrest Monitors Package OWNER S MANUAL HDVD-9BK SD USB AV2 HDVD-9BG HDVD-9GR HDVD-9GRDK Specifications