Upload
hoangdan
View
218
Download
0
Embed Size (px)
Citation preview
2
Putting you in a leading position, no matter
whether the solution you need is simple or complex
Can you imagine defending a unique position for more than 20 years? No? But this
is precisely what we have done. Ever since Festo invented the valve terminal, we
have been the leader, both in terms of the scope of our product portfolio and the
development of new and better functions. And we mean to hold on to that position
– to help you, our customers, create a lead for yourselves over your competitors.
You will find suggestions on how to do this on the following pages.
Simple and inexpensive:
5 valve terminal ranges with
bus node CTEU
Whenever you need solutions
which are simple but nonethe-
less compatible with fieldbus
systems: Festo offers 5 inexpen-
sive valve terminal ranges
equipped with a bus node CTEU.
This strikingly simple fieldbus
technology replaces existing
installations with multi-pin
connectors or individual wiring –
and doesn’t cost any etxra!
The basis for this communication
interface for all CTEU-compatible
valve terminals is the Festo
specific “I-Port” as a universal
M12 connector. This offers the
flexibility of accepting the new
fieldbus/Ethernet bus modules
type CTEU or being configured
for IO Link.
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 2
These valve terminals are cre-
ated for automation in the 21st
century and are unique in the
world thanks to function inte-
gration and a holistic approach:
In combination with CPX, these
valve terminals are able to
display their strengths to the
full as an automation platform
for electrical I/O, standard, pro-
portional and servopneumatics,
sensors and compact vision
systems and with motion
control.
Keeping complex tasks firmly
under control with valve
terminals MPA or VTSA
combined with the modular
electrical terminal CPX
With CPX and valve terminals,
it is possible for the first time
to combine functions such as:
• Front-end control
• Motion control
• Measurement and control
• Diagnostics and condition
monitoring
and implement universal
communication via a fieldbus
system and Ethernet from the
field level up to the master
control level.
What is more, CPX opens up
these valve terminals for use
with all normal fieldbus systems
and all electrical installation
standards. A complete pneu-
matic control chain can be
controlled via just one fieldbus
connection, while the integrated
motion control functions allow
electrical and servopneumatic
positioning. And the heavy-duty
front-end controllers make it
possible to carry out comprehen-
sive process optimization using
their signal pre-processing
functions.
3
A full range of integrated automation options from Festo.
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 3
For a rapid initial selection:
universal terminals and terminals for
specific requirements at a glance.
Universal terminals
Individual valves and valve terminals
in one range VTUG
Modular valve terminals
on sub-bases MPA, VTSA
Compact valve terminals CPV
Specific requirements
ISO standard
- Multi-pin/fieldbus
(sizes 02, 01, 1, 2, 3) VTSA
- Individual connections VSVA/VTIA
Weight-optimised (polymer) VTUB
Pilot valves (semicon, PA) VTOC
Easy to clean CDVI
ATEX
- Zone 2 (cat. 3) CPV, MPA,
CPX- Zone 1 (cat. 2) CPV-EXi
4
Overview: The world of Festo valve terminals
The valve terminal selection table …
… will guide you quickly to the right
solution. It shows a wealth of valve
terminal variants, together with their key
technical features and recommendations
for industry-specific requirements or
particular applications. De
cen
tra
lise
d
Flow rate (litres/min. per valve, max.)
Valve terminals
Electrical periphery
Electrical inputs(max. per valve terminal)
1100/1400
CPX terminal: multifunctional, modular, flexible periphery. Independent platform, comprehensive diagnositics and function integration.Options: remote I/O, remote control and motion control.
CPI systemdecentralised installation system. Up to 16 I/O modules and valve terminals.
3 platforms, for I/O modules, valve terminals and master modules.
400
800
1600
200
200
650
360
300
700
900
800
800
500 VB20
VB20
VB20
400 VB12
1000
500
1000
10
8 16 72 92 144 512 8 16 24
12
550/700
1800/1800
3)
VSVA/VTIA – ISO 15407-1Modular, individual connectors M8/M12,
C type
CPX/VTSA/VTSA-F – ISO 15407-2 and 5599-2Modular, high pneumatic functionality, with electrical I/O
CPX/MPA-S/MPA-F/MPA-LUniversal, modular, flexible, serial valve control, with electrical I/O
CPV Universal, compact, high performance
VTUGUniversal, compact sub-base,
high flow rate
VUVB/VTUBUniversal, highly economical
VTOCCompact, flexible 2x 3/2-waypilot valves
CDVIClean Design IP65/67
3000/3000
4500/-
CTEU/CAPC
Flexible fieldbus and installation concept for up to 2 I/O modules orvalve terminals.
For fast help with planning, why not use the valve terminal configurator in the electronic
catalogue of Festo? Available via www.festo.com, this assists you with the configuration
of almost 20 valve terminal ranges to meet your requirements.
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 4
De
cen
tra
lise
d
Pre
ssu
re s
en
sor
Pro
po
rtio
na
l pre
ssu
re r
eg
ula
tor
En
d-p
osi
tio
n c
on
tro
lle
r S
oft
Sto
p
Se
rvo
pn
eu
ma
tic
po
siti
on
ing
sys
tem
Mu
lti-
axi
s in
terf
ace
fo
r e
lect
ric
axe
s
Sa
fety
te
chn
olo
gy
valv
es
So
ft s
tart
/exh
au
st v
alv
es
Ele
ctri
cal v
olt
ag
e z
on
es
Ve
rtic
al s
tack
ing
Mu
lti-
pin
IO L
ink
, I-
Po
rt
AS
Inte
rfa
ce
De
vice
Ne
t
Pro
fib
us
Inte
rbu
s
CA
No
pe
n
CC
Lin
k
Eth
erC
at
Eth
ern
et/
IP
Mo
db
us/
TCP
Pro
fin
et/
IO R
T
Inte
gra
ted
co
ntr
oll
er
Dir
ect
ly a
ctu
ate
d
Pil
ote
d
Va
cuu
m
Se
vera
l pre
ssu
re z
on
es
IP4
0
IP6
5
IP6
7
Exp
losi
on
-pro
of
Sta
tus
bit
Mo
du
le/c
ha
nn
el-
ori
en
ted
Pre
ven
tve
ma
inte
na
nce
/CM
S
We
b-b
ase
d,
we
b m
on
ito
r
No. of valve coils (max. per valve terminal)
16 24
12
5
DiagnosticsProtectionclass
Valve
properties
Electrical connectionFunction integration
Communication protocol
1) Via CPI system 2) For example: manual pressure regulators, pressure gauges, flow control plates, flow control/shut-off plates (hot-swap), pressure supply, integrated non-return functions/back-pressure valves 3) Via CTEU/CAPC system, up to 32 inputs or 96 valves 4) MPA-L only
32 40 48 56 64 128 512
1) 1)
2)
2) 4)
2)
3)
1) 1) 1)
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 5
Valve terminal VTUG/
individual valves VUVG
The universal valve terminal at
an attractive price. Small, with
high flow rates and all major
functions.
Valve terminal VTUB
Flexible and simple, with an
excellent price/performance
ratio. Sizes VB12 or VB20.
Valve terminal CPV
Maximum performance density
in a minimum of space. Direct
integration of all common bus
interfaces. Compact, with a
fixed grid dimension.
Valve terminal CDVI
Clean and modular, in
IP65/IP67. Easy to clean and
corrosion-resistant, suitable for
all zones up to the splash zone.
Pilot valve terminal VTOC
Compact and flexible, ideal for
piloting process valves in the
semicon, photovoltaics and
process industries.
Valve terminal VSVA
(ISO 15407-1, 5599-1,
individual connections)
Pre-assembled, for medium to
high flow rates. 4 valve sizes
can be combined without the
need for adapters. Integrated
safety functions possible.
Valve terminals VTSA/VTSA-F
(ISO 15407-2, 5599-2, plug-in)
Modular, convertible and
expandable sub-base concept,
based on ISO standard, for
everything up to complete
installation solutions. Offers
maximum pneumatic function
integration and many safety
functions.
Modular valve terminals
MPA1/MPA2/MPA-F
Fieldbus or multi-pin terminals
or individual valves with IP65
metal valve bodies and
subbases. Serial stacking for
fulldiagnostic and condition
monitoring functionality and
integrated proportional
pneumatics. MPA-F: 30% higher
flow rate than MPA 1/2.
Highly modular valve terminal
MPA-L
Plastic sub-bases. Up to 32
valve positions/coils, expand-
able in small increments.
6
Festo’s world of valve terminals in detail
A brief overview of selected valve terminals and peripheral
products, together with services and support facilities.
More information can be found on our Internet Support
Portal: www.festo.com
Here you will find detailed descriptions of almost 20 valve
terminal ranges – just enter the type (e.g. VTSA).
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 6
7
Modular electrical terminal CPX
A world-wide unique platform for
function integration, including
electrical I/O, standard, pro por-
tional and servopneumatics,
sensors and compact vision
systems and motion control.
Decentralised installation
system CPI
Highly modular control and
energy supply concept with a
single transition point for all
common fieldbuses and Ethernet
protocols.
Bus node CTEU
Impressively simple fieldbus
technology: For fieldbus-capable
valve terminals for the price of a
multi-pin solution. Optional
adapter CAPC as a small installa-
tion system.
AS-interface components
Extremely simple, economical and
flexible installation and control of
distributed individual valves, sen-
sors and safety technology. A sin-
gle source for pneumatic as well
as electrical components.
IO Link/I-Port
Standardised point-to-point com-
munication link for diagnostics
and parameterization of sensors,
actuators, valves and valve termi-
nals. The I-Port is a Festo-specific
communic a tion link with inte-
grated Festo Plug and Work®-con-
cept. For ultra-simple system
assembly and commissioning.
Fieldbus direct connection
Space-optimised connection of
valve terminals using directly
integrated fieldbus node.
Advantage: Everything from a
single source – and optimised
pneumatic diagnostics.
Fieldbus/Ethernet
Designed to be more
communicative! Festo supports all
established fieldbus systems. For
a high degree of integration of
electric, pneumatic and motion
control functions on a single
platform and from a single source.
Allows comprehensive diagnos-
tics and condition monitoring,
pre-processing and seamless
integration into your control
system .
Electrical connection technology
Perfectly matched: The modular
system NEBU for connecting ca-
bles.
After-Sales Service
Hot line, spare parts service,
repair service, emergency service
or on-site technical customer
service – as a single service or
as a modular service package.
Energy Saving Services
Achieve energy and other cost
savings of up to 60% together
with increased productivity – an
investment that will generally pay
for itself within a short time.
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 7
Advanced function integration
Beck Automation AG,
Oberengstringen, Switzerland
If a company wishes to develop
stylish solutions, it needs
inventive but also reliable
partners. “Festo is just such a
partner,” explains Christian
Beck, one of the managing
partners of the Swiss company
Beck Automation AG. This
company supplies hand ling
robots for the in-mould labeling
process. For Beck, international
service is just as important as
excellence in technology.
Decentralization as a magic
formula
KUKA Systems GmbH,
Augsburg, Germany
Solar modules on a 10-second
high-speed tuning cycle to
produce crystalline photovoltaic
modules. Trimming, taping on
the fly and framing are under-
taken by fully-automatic robotic
systems. Festo pneuma tic
proportional technology ensures
that the contact pressure of the
tape roller is correct. The
decentralised electro - pneumatic
control chain with CPX/MPA
directly on the robot tool makes
the process faster and more
reliable and saves energy.
Individual control
elumatec GmbH,
Mühlacker, Germany
A good appearance is important
for successful sales! This also
applies to aluminium and plastic
profiles, as the manu facturer
elumatec knows: “Our machines
need to be fast and precise and
also sensitive.” This is why
elumatec chooses Festo valve
terminal technology. “In order to
be able to actuate cylinders with
different pressures, we use the
functionality of Festo products
for creating of pressure zones
and for the vertical stacking of
modules.”
8
Attractive solutions – from every point of view
The whole is greater than the sum of its parts. Whoever takes this rule to heart becomes
stronger. Just like us at Festo. We always aim to use our individual strengths to create a
holistic solution. Our customers greatly appreciate this. Here are just a few examples:
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 8
Commissioning and mainte-
nance: As easy as child’s play
CeraCon GmbH,
Weikersheim, Germany
People seldom give a thought to
foam seals, but these provide re-
liable protection from air, dust
and humidity. CeraCon’s new
one-component system and
proportional technology from
Festo is generating innovation
in the seal industry. During the
preparation and dosing of the
materials, a valve terminal
CPX/MPA with diagnostic
functionality forms a bridgehead
to the master machine control
system. Standardised network-
ing and a neat installation
structure, easy implementation
and high function density
provide benefits for CeraCon as
commissioning and maintenance
become as easy as child’s play.
Seminar on higher plant
efficiency
Karlsberg Brauerei GmbH,
Homburg, Germany
One important concept for
increasing machine availability
and reducing downtime is Total
Productive Maintenance, or TPM.
This is used by, for example, the
brewery Karlsberg Brauerei GmbH
in Homburg to achieve a
continuous increase in plant
efficiency. The Festo Didactic
seminar “Fundamentals of Total
Productive Maintenance (TPM)”
provided the company with an
introduction to this concept.
Reducing costs with ready-to-
install control cabinets
Ziemann Group,
Ludwigsburg, Germany
The Ziemann Group in Ludwigs-
burg develops and builds
brewery installations for clients
worldwide. The extremely
economical operation of these
installations allow breweries to
run production operations with
extremely low life-cycle costs.
In designing these installations,
Ziemann concentrates totally on
its own core competences.
Control cabinets for the produc-
tion systems in the brewing
rooms and refrigerated areas
are supplied by Festo as ready-
to-install units. These control
the pneuma tic process valves
and provide individual diagnos-
tics for each valve. A pressure
measurement module on each
valve manifold checks the
supply pressure.
9
Our range of products and services provide
everything you need:
• Complete portfolio for every requirement
• Clear installation concepts, also for
combined installations
• Comprehensive ncentrated services covering
everything from engineering to after sales
• Support tools for all phases from engineering
to operation, e.g. for correct dimensioning
• Attractive electrical and pneumatic concepts
• Maximum function integration
• Diagnostic and condition monitoring packages
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 9
3. Concepts with a protected
installation area: lower
protection class possible,
fewer connections
• IP20 connection system
CageClamp for control
cabinets. Flexible, reliable, fast
• Multi-pin connectors in control
cabinets save hardware costs
• CageClamp IP20 on machines
and in safety covers AK-8KL for
CPX gives IP65/67
• Pneumatic multi-pin connector
for CPV or VTUG saves a vast
amount of installation work
• Protective cover CAFR – for
electric shock protection
without a control cabinet
1. Concentration of a number of
valves and I/O on one point with
central installation
Example of CPX/VTSA with
Profibus:
• Price per channel for 4
5/2-way valves 100%
• Price per channel for 16
5/2-way valves 40% less
• Price per channel for 32
5/2-way valves 50% less
Example of CPX/MPA with
Profibus:
• Price per channel for 16
3/2-way valves 100%
• Price per channel for 32
3/2-way valves 16% less
• Price per channel for 128
3/2-way valves 28% less
2. More performance – greatly
reduced price per channel on
high-capacity I/O modules
• 8 digital inputs instead of 4:
price per channel 40% less
• 16 digital inputs instead of 8:
25% less
• 8 digital outputs instead of 4:
15% less
• 4 analogue inputs instead of
2: 20% less
More channels per modules
means, for example, overhead
costs with decentralised valve
terminals which are up to 34%
lower!
4. Benefit from higher
productivity
A decentralised machine concept
requires greater investment. But
it can speed up cycle times by
10%, thus making the investment
pay for itself within just a few
weeks. Diagnostic functions are
also well worthwhile and improve
the total cost of ownership (TCO)
of your end customers (see
point 5, page 12). With remote
maintenance, for example, you
can offer completely new types of
service concepts or maintenance
contracts and new forms of
guarantees.
10
Reducing the cost of electrical and motion control solutions
Within the overall costs of an installation, the costs of the components themselves are
often the smallest item. You can therefore reduce overall costs by planning ahead. Below
you will find some hints and tips that will help you to get more out of your budget.
Technological optimization for more economic production
Deal with one component
instead of over 200. In factory
and process automation, it is
possible to optimize overall
costs and increase reliability.
For example, with well-thought-
out control cabinet concepts,
even for high-volume
production.
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 10
11
Electrical criteria and motion control
Electrical criteria
No. of valvesNo. of digital I/O
• Analogue I/O• Temperature measurement • Pressure measurement• Displacement measurement
I/O parameterizable
Motion control for electric drives• Asynchronous• Synchronous• 2.5 D
Motion cont. servopneumatic drives• Soft-Stop end-position cushioning• Positioning system
• IO Link/I-Port• Fieldbus• Ethernet• Fieldbus and Ethernet
in combination• Pre-processing
(front-end control)- CEC-C1 diagnostics- CEC-M1 motion- PC Worx
Diagnostic functions• LEDs• Hand-held control unit • Module-oriented• Channel-oriented• CMS• Limit values • SMS/e-mail alarm• CPX web monitor• CPX-FMT maintenance tool
Centralised
8 ... 128
Preferred tubing
length < 3 m
Yes
Yes
Yes
Yes
Yes
Up to 31
Up to 8
Up to 8
Up to 8
Up to 8
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Decentralised
32 ... 128
Distance between
modules up to 8 - 10 m
–
–
–
–
–
–
–
–
–
–
–
Yes
Yes
Yes, with CPX
Yes
Yes
Yes
Yes
Yes
Yes
–
–
–
Yes
Yes
Yes
Hybrid
… 512
Yes
Yes
Yes
Yes
Yes (local I/O)
Up to 31
Up to 8
Up to 8
Up to 8
Up to 8
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes (local I/O)
Yes
Yes (local I/O)
Yes
Yes
Yes
On-site (Fieldbus Direct)
2 … 32 (48)
–
–
–
–
–
–
–
–
–
–
Yes
Yes
–
–
–
–
–
Yes
–
Yes
–
Yes
–
–
–
–
Fieldbus I/O
Bandwidth
Typical
16 32 64 128 5128
Fieldbus I/O
Bandwidth
Typical
16 32 64 128 5128
Fieldbus I/O
Bandwidth
Typical
16 32 64 128 5128
Fieldbus I/O
Bandwidth
Typical
16 32 64 128 5128
ASi I/Os
Bandwidth
Typical
4 82
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 11
A further benefit: our
Condition Monitoring
Service. This continuously
monitors critical processes
and avoids unplanned
downtime. This service can
be matched exactly to your
requirements and we can
also provide support during
implementation. Ask our
specialists!
3a. Optimizing installation
space by up to 70%
The closer valves and I/O
modules are to the application,
the less installation space is
required. What is more, a multi-
pin connector can be up to 40%
smaller than a fieldbus
connector.
3b. Optimizing installation
space by up to 50%
Halve the installation width by
installing higher-capacity I/O
modules (see point 2, page 10).
3c. Optimizing installation
space: Decentral I/O modules
for three platforms
• Compact – minimal installation
space
• Robust – aluminium housings
with metal threads
• Economical – high channel
density
12
Reducing the cost of pneumatic components and safety technology
Do you know our integrated
technology? It offers system so-
lutions that deliver maximum
performance with minimal di-
mensions. These are ideal wher-
ever a compact neat design or
fast installation and mainte-
nance is important.
1. Saving flow rate by up to 50%
The principle is to be as close as
possible to the application; e.g.
by mounting on handling units or
robots.
2. Optimizing cycle times
by up to 30%
Will fast valves or a higher flow
rate boost performance? A
precise answer is provided by a
simulation which also takes into
account tubing cross-section and
length.
4. Function integration
for demonstrable efficiency
gains of up to 60%
Modules for temperatur e
measurement, manual pressure
regulators, pressure sensors
or proportional valves can now
be ordered fully integrated,
pre- assembled and tested on
CPX/MPA. This saves space
and simplifies installation,
commissioning and
programming.
5. Optimised machine
utilization through diagnostics
There is a wide choice of
diagnostic functions and
diagnostic depth, with
optimization of the strategic
diagnostic approach. Herer
are a few examples:
Technology that delivers greater economy
• Reducing downtime by a
factor of 8 with channel-
oriented diagnostics. Allows
immediate detection of the
type of fault and its location.
• The valve terminal MPA is
more reliable, safer and more
economical thanks to serial
linking, special Festo valve
ASICs and pressure sensors.
• CPX Web Monitor – optional
for all valve terminals
connected to CPX via
Ethernet. Comprehensive
diagnostics without program-
ming costs using standard
browsers.
• Condition Monitoring
Systems for preventive
maintenance to avoid
breakdowns. Only from
Festo: specially for valves!
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 12
13
Pneumatic Centralised Decentralised On-site* Hybridcriteria MPA VTSA MPA CPV MPA VTSA CPV
No. of valves 1 … 128 1 … 32 2 … 32 4/6/8 8 ... 48* 1 … 512 1 … 32 + 4 … 512
decentral
MPA/CPV
up to 480
Flow rate 360 700 360 200** – 360 700 200**
700 1400 700 400 – 700 1400 400
900 1800 800 – 900 1800 800
3000 1600 10 ... 1600* 3000 1600
4500 4500
Vertical stacking• Manual regulator Yes Yes Yes – Yes* Yes Yes –
• Flow control plate – Yes Yes Yes Yes* – Yes Yes
• Pressure shut-off plate Yes Yes Yes – Yes* Yes Yes –
• Air supply plate – Yes – – – – Yes –
Valve size mix• 2 sizes Yes Yes Yes – – Yes Yes –
• 3 sizes – Yes – – – – Yes –
• 4 sizes – Yes – – – – Yes –
• 5 sizes – Yes – – – – Yes –
Function integration• Pressure sensor Yes – – – – Yes – –
• Proportional pressure regulator Yes – – – – Yes – –
• Single-channel valve diagnostics Yes Yes – – – Yes Yes –
• CMS valves Yes – – – Yes* Yes – –
• Voltage zones, electrically isolated Yes Yes – – – Yes Yes –
Safety technology• Interlock function – – – – Yes* – – –
• Valves for press control, – Yes – – – – Yes –
with two-channel interlinking• Valves for manual clamps – Yes – – – – Yes –
• Valves for lifting/turning cylinders – Yes – – – – Yes –
• Valves with piston rod sensing – Yes – – – – Yes –
• Soft start and exhaust valve – Yes – – – – Yes –
• Switch-off concepts – Yes – – – – Yes –
up to performance level d (cat. 3)• Profisafe switch-off module up to
performance level e (cat. 3) and SIL 3 Yes Yes – – – Yes Yes –
* Depending on the valve terminal range CPV, MPA-L, VTUB, VTUG, VTOC ** CPV-SC, IP40
Pneumatic criteria and safety technology
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 13
Award-winning!
In recognition of its capacity for
innovation, Festo was accorded
the German Future Award 2010
from the Federal German
President.
We feel that there is a part of
this award in each of our new
products, thus reflecting Festo’s
intention that each product
represents the optimum in terms
of functionality and future-
oriented technology. Our great
inspiration is bionics –
unravelling nature’s original
archetype to discover the
fundamental technical principle
and creating a bionic adaptation
fit for an industrial application.
The latest electronics
from Festo.
Several hundred people work at
Festo in its electronics develop-
ment department, in specialised
laboratories, in research and in
Festo’s own electronics
production operations. We
produce well over one million
printed circuit boards each year
and test these to the strictest
standards. This ensures that our
valve terminals can be integrated
perfectly into industrial
communication systems – and
that you can rely on us to supply
start-of-the-art technology.
Virtual reality –
for faster design work …
… and dependable production.
Our research and development
department uses this
technology to simulate and
optimize fluidic processes. This
reduces time to market – and
enables complex connections
to be precsiely calculated in
advance.
The quality of Festo’s product
portfolio and production
operations …
… ensures we can deliver
maximum process reliability
and performance in pneumatics,
electrical engineering and
networking.
14
We enjoy a challenge!
Our in-house research and development department is fully equipped with state-of-the-art
the devices it needs to create objective-oriented innovations in all our major competence
areas – electronics, pneumatics, motion control and industrial networking.
Future-oriented tech-
nology.
This means many
innovative catalogue
products, tested
under real-life conditi-
ons, for your benefit.
www.festo.de
Gewinner 2010
Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 14
3. Acoustics, analysis
• Sound measurement
Whisper-quiet pneumatic
products in accordance with
Festo’s own standard and
DIN 45635-1 or ISO 3745
is created in our sound
measurement toom, which
is a certified and authorized
test facility.
• Microscopes and X-rays
Analysis of material samples
and identification of
consequential faults using a
scanning electron microscope,
a laser scanning microscope
and X-ray examination.
• Spectral analysis
Detects the smallest particles
and invisible elements such
as contamination in oils.
4. Climatic tests
Continuous hot/cold cycle
In accordance with Festo stan-
dards: how long will mechanical
and electronic components last
at ambient temperatures of
between -40 and +150 °C?
5. Fire and water
Water jet tests to verify
protection class IP65/67 in
accordance with Festo’s own
standard, DIN EN 60529 and
NEMA 250 to ensure that these
components will survive a harsh
industrial environment.
6. Clean room classes
Festo products are tested in
our own Competence Center to
ensure they comply with VDI
guideline 2083 or Federal
Standard 209 F Airborne. The
result: Many inexpensive Festo
products can also be used in
clean rooms.
7. Endurance tests
In accordance with various Festo
standards. In order to ensure
maximum process reliability,
valves, valve terminals, electrical
I/O and fieldbus interfaces,
together with plugs, cables and
tubing/fitting combinations, are
exhaustively tested by bending,
stretching and connecting/
disconnecting.
8. Explosion protection
Festo carries out testing and
certification of pneumatic and
electrical explosion-proof
products, for example in
accordance with the directive
94/9/EC or EN 60079. For the
latest information, declarations
of conformity and other
documentation, see
www.festo.com/en/ex
Systematic innovation
15
A brief tour of our facilities
1. Mechanical engineering
• Tensile/compression tests …
… in accordance with
DIN EN 10002 to ensure
that the materials meet our
demanding requirements even
at extreme temperatures.
• Corrosion resistance …
… in accordance with
DIN EN 50018, DIN EN 50021
and an internal Festo standard
to ensure hard-wearing
finishes for metallic surfaces
and selected plastics.
• Vibration/shock tests
In accordance with
FN942017-5 and DIN/IEC 68.
2. Electrical engineering
Certified EMC laboratory
Conformity testing of everything
up to and including fully
assembled valve terminals in
accordance with the EMC
directives 89/336 EEC and
2004/ 108EC. Festo’s in-house
EMC laboratory also acts as an
accredited test facility!
Ventilinseluebers_en.qxp 28.07.2011 13:24 Uhr Seite 15
13
52
37
en
20
11
/07
Festo worldwide
ArgentinaFesto S.A.Edison 2392(1640) MartínezProv. Buenos AiresTel. +54 (011) 4717 82 00,Fax +54 (011) 47 17 82 82E-mail: [email protected]
AustraliaFesto Pty. Ltd.Head Office (Melbourne)179-187 Browns RoadP.O. Box 261Noble Park Vic. 3174Call Toll Free 1300 88 96 96Fax Toll Free 1300 88 95 95Tel. +61(0)3 97 95 95 55,Fax +61(0)3 97 95 97 87E-mail: [email protected]
AustriaFesto Gesellschaft m.b.H.Linzer Straße 2271140 WienTel. +43 (0)1 910 75-0, Fax +43 (0)1 910 75-250E-mail: [email protected]
BelarusIP FestoMasherov avenue, 78220035 MinskTel. +375 (0)17 204 85 58,Fax +375 (0)17 204 85 59E-mail: [email protected]
BelgiumFesto Belgium saRue Colonel Bourg 1011030 BruxellesTel. +32 (0)2 702 32 11, Fax +32 (0)2 702 32 09E-mail: [email protected]
BelgiumFesto Belgium nvKolonel Bourgstraat 1011030 BrusselTel. +32 (0)2 702 32 11, Fax +32 (0)2 702 32 09E-mail: [email protected]
BrazilFesto Brasil LtdaRua Guiseppe Crespi, 76KM 12,5 - Via Anchieta04183-080 São Paulo SP-BrazílTel. +55 (0)11 50 13 16 00,Fax +55 (0)11 50 13 18 68E-mail: [email protected]
BulgariaFesto EOOD1592 SofiaBul. Christophor Kolumb 9Tel. +359 (0)2 960 07 12,Fax +359 (0)2 960 07 13E-mail: [email protected]
CanadaFesto Inc.5300 Explorer DriveMississauga, Ontario L4W 5G4Tel. +1 (0)905 624 90 00,Fax +1 (0)905 624 90 01E-mail: [email protected]
ChileFesto S.A.Avenida Américo Vespucio, 760PudahuelSantiagoTel. +56 2 690 28 00, Fax +56 2 690 28 60E-mail: [email protected]
ChinaFesto (China) Ltd.1156 Yunqiao Road,Jinqiao Export Processing Zone,Pudong,201206 ShanghaiTel. +86 21 60 81 51 00, Fax +86 21 58 54 03 00E-mail: [email protected]
ColombiaFesto Ltda.Autopista Bogotá - Medellín Km 6 (costado sur)Tenjo, CundinamarcaTel. +57 (1) 865 77 88,Fax +57 (1) 865 77 88 Ext.287E-mail: [email protected]
CroatiaFesto d.o.o.Nova Cesta 18110000 ZagrebTel. +385 (0)1 619 19 69,Fax +385 (0)1 619 18 18E-mail: [email protected]
Czech RepublicFesto, s.r.o.Modřanská 543/76147 00 Praha 4Tel. +420 261 09 96 11, Fax +420 241 77 33 84E-mail: [email protected]
DenmarkFesto A/SIslevdalvej 1802610 RødovreTel. +45 70 21 10 90, Fax +45 44 88 81 10E-mail: [email protected]
EstoniaFesto OY AB Eesti FiliaalLaki 11B12915 TallinnTel. +372 666 15 60, Fax +372 666 15 61E-mail: [email protected]
FinlandFesto OYMäkituvantie 9P.O. Box 8601511 VantaaTel. +358 (09) 87 06 51,Fax +358 (09) 87 06 52 00E-mail: [email protected]
FranceFesto EurlZA des Maisons Rouges8 rue du clos sainte Catherine94360 Bry-sur-MarneTel. +33 (0) 820 20 46 40 (numéro indigo),Fax +33 (0) 820 20 46 41E-mail: [email protected]
GermanyFesto AG & Co. KGPostfach73726 EsslingenRuiter Straße 8273734 EsslingenTel. +49 (0)711 347 0, Fax +49 (0)711 347 26 28E-mail: [email protected]
GreeceFesto Ltd.40 Hamosternas Ave.P.C. 11853 AthensTel. +30 210 341 29 00, Fax +30 210 341 29 05E-mail: [email protected]
Hong KongFesto Ltd.6/F New Timely Factory Building,497 Castle Peak Road,Kowloon, Hong KongTel. + 852 27 43 83 79, Fax + 852 27 86 21 73E-mail: [email protected]
HungaryFesto Kft.Csillaghegyi út 32-34.1037 BudapestHotline +36 1 436 51 00Tel. +36 1 436 51 11, Fax +36 1 436 51 01E-mail: [email protected]
IndiaFesto Controls Private Ltd.237B,Bommasandra Industrial Area,Bangalore Hosur Highway,Bangalore 560 099Tel. +91 (0)80 22 89 41 00,Fax +91 (0)80 27 83 20 58 / 27 83 33 62E-mail: [email protected]
IndonesiaPT. FestoJL. Sultan Iskandar Muda No. 68Arteri Pondok IndahJakarta 12240Tel. +62 (0)21 27 50 79 00,Fax +62 (0)21 27 50 79 98E-mail: [email protected]
IranFesto Pneumatic S.K.# 2, 6th street, 16th avenue,Km 8, Special Karaj RoadP.O.Box 15815-1485Teheran 1389793761Tel. +98 (0)21 44 52 24 09,Fax +98 (0)21 44 52 24 08E-mail: [email protected]
IrelandFesto LimitedUnit 5 Sandyford ParkSandyford Industrial EstateDublin 18Tel. +353 (0)1 295 49 55,Fax +353 (0)1 295 56 80E-mail: [email protected]
IsraelFesto Pneumatic Israel Ltd.P.O. Box 1076Ha'atzma'ut Road 48Yehud 56100Tel. +972 (0)3 632 22 66,Fax +972 (0)3 632 22 77E-mail: [email protected]
ItalyFesto SpAVia Enrico Fermi 36/3820090 Assago (MI)Tel. +39 02 45 78 81, Fax +39 02 488 06 20E-mail: [email protected]
JapanFesto K.K.1-26-10 HayabuchiTsuzuki-kuYokohama 224-0025Tel. +81 (0)45 593 56 10 / -5611,Fax +81 (0)45 593 56 78E-mail: [email protected]
Korea SouthFesto Korea Co., Ltd.470-1 Gasan-dongGeumcheon-guSeoul #153-803Tel. +82 (0)2 850 71 14, Fax +82 (0)2 864 70 40E-mail: [email protected]
LatviaFesto SIAA. Deglava iela 601035 RigaTel. +371 67 57 78 64, Fax +371 67 57 79 46E-mail: [email protected]
LithuaniaFesto, UABPartizanų 63M50306 KaunasLietuvaTel. +370 (8)7 32 13 14, Fax +370 (8)7 32 13 15E-mail: [email protected]
MalaysiaFesto Sdn. Berhad10 Persiaran IndustriBandar Sri DamansaraWilayah Persekutuan52200 Kuala LumpurTel. +60 (0)3 62 86 80 00,Fax +60 (0)3 62 75 64 11E-mail: [email protected]
MexicoFesto Pneumatic, S.A.Av. Ceylán 3,Col. Tequesquináhuac54020 TlalnepantlaEstado de MéxicoTel. +52 (01)55 53 21 66 00,Fax +52 (01)55 53 21 66 55E-mail: [email protected]
NetherlandsFesto B.V.Schieweg 622627 AN DelftTel. +31 (0)15 251 88 99,Fax +31 (0)15 251 88 67E-mail: [email protected]
New ZealandFesto Ltd.20 Fisher CrescentMount WellingtonAucklandTel. +64 (0)9 574 10 94, Fax +64 (0)9 574 10 99E-mail: [email protected]
NigeriaFesto Automation Ltd.Motorways Centre, First Floor, Block CAlausa, Ikeja,LagosTel. +234 (0)1 794 78 20,Fax +234 (0)1 555 78 94E-mail: [email protected]
NorwayFesto ASOle Deviks vei 20666 OsloTel. +47 22 72 89 50, Fax +47 22 72 89 51E-mail: [email protected]
PeruFesto S.R.L.Amador Merino Reyna 480San IsidroLimaTel. +51 (1) 219 69 60, Fax +51 (1) 219 69 71E-mail: [email protected]
PhilippinesFesto Inc.Festo BuildingKM 18, West Service RoadSouth Superhighway1700 Paranaque CityMetro ManilaTel. +63 (0)2 776 68 88, Fax +63 (0)2 823 42 19E-mail: [email protected]
PolandFesto Sp. z o.o.Janki k/Warszawyul. Mszczonowska 705090 RaszynTel. +48 (0)22 711 41 00,Fax +48 (0)22 711 41 02E-mail: [email protected]
PortugalFesto – Automação, Unipessoal, Lda.Rua Manuel Pinto De Azevedo, 567Apartado 80134109-016 PortoContact Center: 707 20 20 43Tel. +351 22 615 61 50, Fax +351 22 615 61 89E-mail: [email protected]
RomaniaFesto S.R.L.St. Constantin 17010217 BucurestiTel. +40 (0)21 310 31 90,Fax +40 (0)21 310 24 09E-mail: [email protected]
RussiaOOO Festo-RFMichurinskiy prosp., 49119607 MoscowTel. +7 495 737 34 00, Fax +7 495 737 34 01E-mail: [email protected]
SingaporeFesto Pte. Ltd.6 Kian Teck WaySingapore 628754Tel. +65 62 64 01 52, Fax +65 62 61 10 26E-mail: [email protected]
SlovakiaFesto spol. s r.o.Gavlovicová ul. 183103 Bratislava 3Tel. +421 (0)2 49 10 49 10,Fax +421 (0)2 49 10 49 11E-mail: [email protected]
SloveniaFesto d.o.o. LjubljanaIC Trzin, Blatnica 81236 TrzinTel. +386 (0)1 530 21 00,Fax +386 (0)1 530 21 25E-mail: [email protected]
South AfricaFesto (Pty) Ltd.22-26 Electron AvenueP.O. Box 255Isando 1600Tel. +27 (0)11 971 55 00,Fax +27 (0)11 974 21 57E-mail: [email protected]
SpainFesto Pneumatic, S.A.U.Avenida Granvia, 159Distrito Económico Granvia L'H08908 Hospitalet de LlobregatBarcelonaTel.: 901243660, Fax: 902243660Tel. +34 93 261 64 00, Fax +34 93 261 64 20E-mail: [email protected]
SwedenFesto ABStillmansgatan 1Box 21038200 21 MalmöTel. +46 (0)20 38 38 40, Fax +46 (0)40 38 38 10E-mail: [email protected]
SwitzerlandFesto AGMoosmattstrasse 248953 Dietikon ZHTel. +41 (0)44 744 55 44,Fax +41 (0)44 744 55 00E-mail: [email protected]
TaiwanFesto Co., Ltd.Head Office244509, Kung 8th RoadLinkou 2nd Industrial ZoneLinkou Dist., New Taipei CityTaiwan, R.O.C.Tel. +886 (0)2 26 01-92 81,Fax +886 (0)2 26 01 92 86-7E-mail: [email protected]
ThailandFesto Ltd.67/1 Phaholyothin Rd.,T. Klong 1, A. KlongluangPathumthani 12120Tel. +66 29 01 88 00, Fax +66 29 01 88 30E-mail: [email protected]
TurkeyFesto San. ve Tic. A.S.Tuzla Mermerciler OrganizeSanayi Bölgesi 6/1834956 Tuzla - Istanbul/TRTel. +90 (0)216 585 00 85,Fax +90 (0)216 585 00 50E-mail: [email protected]
UkraineFesto UkrainaDP Festovul. Borisoglebskaya,1104070, KievTel. +380 (0)44 239 24 30,Fax +380 (0)44 463 70 96E-mail: [email protected]
United KingdomFesto LimitedApplied Automation CentreCaswell RoadBrackmills Trading EstateNorthampton NN4 7PYTel. ++44 (0)1604 / 66 70 00,Fax ++44 (0)1604 / 66 70 01E-mail: [email protected]
United StatesFesto Corporation (New York)395 Moreland RoadP.O. Box 18023Hauppauge, NY 11788Call Toll-free 800/993 3786Fax Toll-free 800/963 3786Tel. +1(631) 435 08 00, Fax +1(631) 435 80 26E-mail: [email protected]
VenezuelaFesto C.A.Av. 23 esquina con calle 71N° 22-62, Edif. Festo.Sector ParaísoMaracaibo - VenezuelaTel. +58 (261) 759 11 20/759 41 20/759 44 38,Fax +58 (261) 759 04 55E-mail: [email protected]
VietnamFesto Co., Ltd (Cong Ty Tnhh Festo)No. 206 Tran Nao StreetWard Binh AnDistrict 2Ho Chi Minh CityTel. +84 (0)8 740 69 09, Fax +84 (0)8 740 69 10E-mail: [email protected]
Ventilinseluebers_en.qxp 28.07.2011 13:24 Uhr Seite 16