Upload
duongdan
View
221
Download
0
Embed Size (px)
Citation preview
Tolerances
* Standard tolerances
Additional limitations of the tolerance range are available on demand.
Tolerances according to EN ISO 1127Outer diameter tolerances Wall thickness tolerancesTolerance class Permissible tolerances Tolerance class Permissible tolerancesD1 +/- 1.50 % with min. +/- 0.75 mm T1 +/- 15.00 % with min. +/- 0.60 mmD2 +/- 1.00 % with min. +/- 0.50 mm T2 +/- 12.50 % with min. +/- 0.40 mmD3* +/- 0.75 % with min. +/- 0.30 mm T3* +/- 10.00 % with min. +/- 0.20 mmD4* +/- 0.50 % with min. +/- 0.10 mm T4 +/- 7.50 % with min. +/- 0.15 mm
Tolerances according to DVGW-Worksheet W 541 for tubes for drinking waterOuter diameter Wall thickness Outer diameter Wall thicknessDia. [mm] Tolerance [mm] WT [mm] Tolerance [mm] Dia. [mm] Tolerance [mm] WT [mm] Tolerance [mm]12.00 +/- 0.10 1.00 +/- 0.10 42.00 +/- 0.21 1.50 +/- 0.1015.00 +/- 0.10 1.00 +/- 0.10 54.00 +/- 0.27 1.50 +/- 0.1018.00 +/- 0.10 1.00 +/- 0.10 64.00 +/- 0.32 2.00 +/- 0.1522.00 +/- 0.11 1.20 +/- 0.10 76.10 +/- 0.38 2.00 +/- 0.1628.00 +/- 0.14 1.20 +/- 0.10 88.90 +/- 0.44 2.00 +/- 0.1735.00 +/- 0.18 1.50 +/- 0.10 On demand: special geometries
Tolerances according to DIN 28181 for heat exchanger tubesPermissible diameter deviations Permissible wall thickness deviationsDia. [mm] Tolerance class 1 [mm] Tolerance class 2 [mm] Dia. [mm] WT ≤ 2 [mm] WT > 2 [mm]16 +/- 0.10 +/- 0.30 16 +/- 0.20 +/- 0.10 %20 +/- 0.10 +/- 0.30 20 +/- 0.20 +/- 0.10 %25 +/- 0.12 +/- 0.30 25 +/- 0.20 +/- 0.10 %30 +/- 0.15 +/- 0.30 30 +/- 0.20 +/- 0.10 %38 +/- 0.20 +/- 0.40 38 +/- 0.20 +/- 0.10 %