14
Page 1 of 14 (Rev. 02/2020) ORY6S_ss_v6.2 In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us Ouray 600 Sistema Project: Type: Qty: Date: Customer: Series U6 Ouray 600 U6 * Refer to page 10 for sensor details Order Code: Pole Order Code: - - - Series Height Finish Options U6 #1 #2 #3 #4 Series Optics Mounting Options Fixture # Light Engine - Rivnut Pairs RN - - - - - - - - Fixture # CCT Finish Voltage *Refer to chart on page 4 for Rivnut locations *Rivnut Locations U6 U6 U6 LED WARRANTY 5 YEAR Optics Fixed Mounting SBx Short Pole Bracket Sistema Mount SQx Square Pole Bracket Sistema Mount * May be combined with adjustable mounting * Refer to page 4 for locating mountings R1 Type I R2 Type II R3 Type III R5R Type V (Round) R4 Type IV R5S Type V (Square) PP Plane Projector R3W Type III (Wide) R5Q Type V (Rectangu- lar) Light Engine CCT Adjustable Mounting Finish WH White BK Black BZ Bronze SP Specify Premium Color Voltage UNV Options 32700K and 3000K are IDA-Approved *For other CCT, please consult factory SV Silver 303 3000K 40 4000K 8 120V, 240V or 277V only 7 120V or 277V only 6 DM, HLXX, TLR or IMS only. Cannot be combined. 5 Type I, II, III, and IV only 9 Glass is included with CO and PP options and does not need to be specified separately BL Semi-Matte Black 120- 277 HS 5 House Side Shield (180°) DM 6 Dimming (0-10V) GL 9 Tempered Glass Lens TLR 6,8 Twist Lock Receptacle 7-Pin with Shorting Cap HL30 6,8 Hi-Lo Switching Low Output 30% HL50 6,8 Hi-Lo Switching Low Output 50% AT 1 Adjustable Tilt AS Adjustable Swivel XX None 120 4 120V 240 4 240V 277 4 277V 347 347V 480 480V 4 Specify for HLXX option Pole Motion Sensor with optional photocell See page 11 for order code 2 347/480V and HLXX options cannot be combined with 5G140 * Based on RI distributions at 3000K CCT no glass Power Cord Length 8 10 12 14 16 18 XX 8’ 10’ 12’ 14’ 16’ 18’ XX’ CO 9 Comfort Optics (Not available with PP optics) * Add length of arm and height of pole to determine power cord length TLRP 8 Twist Lock Receptacle 3-Pin with Photocell IMS 6,7 Internal Motion Sensor 273 2700K 1 AT mounting not IDA approved - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5G350 77W/8,561lm 5G530 107W/12,450lm 5G700 148W/15,576lm 5G105 230W/21,623lm 5G140 2 306W/25,707lm

Ouray 600 Sistema [U6] seluxU6. 13 3/4” (350mm) 241/8” (613mm) Ouray 600 Sistema. 4 3/8” (111mm) 1 4 5. 2. 1. Fixture Housing - Die cast low copper . marine grade aluminum body

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Ouray 600Sistema

Project:

Type: Qty:

Date: Customer:

Series U6 Ouray 600

U6

* Refer to page 10 for sensor details

Order Code:

Pole Order Code: - - -Series Height Finish Options

U6#1

#2

#3

#4

Series Optics Mounting OptionsFixture # Light Engine

-

Rivnut Pairs

RN - - - - - - - -

Fixture #

CCT Finish Voltage

* Refer to chart on page 4 for Rivnut locations

*Rivnut Locations

U6

U6

U6

LED WARRANTY

5YEAR

Optics

Fixed Mounting

SBx Short Pole Bracket Sistema Mount

SQx Square Pole BracketSistemaMount

*May be combined with adjustable mounting

* Refer to page 4 for locating mountings

R1 Type I

R2 Type II

R3 Type III

R5R Type V (Round)

R4 Type IV

R5S Type V (Square)

PP Plane Projector

R3W Type III (Wide)

R5Q Type V (Rectangu-lar)

Light Engine

CCT

Adjustable Mounting

Finish WH White

BK Black

BZ Bronze

SP Specify Premium Color

Voltage UNV

Options

32700K and 3000K are IDA-Approved

*For other CCT, please consult factory

SV Silver

303 3000K

40 4000K

8 120V, 240V or 277V only

7 120V or 277V only

6 DM, HLXX, TLR or IMS only. Cannot be combined.

5 Type I, II, III, and IV only

9 Glass is included with CO and PP options and does not need to be specified separately

BL Semi-Matte Black

120- 277

HS5 House Side Shield (180°)

DM6 Dimming (0-10V)

GL9 Tempered Glass Lens

TLR6,8 Twist Lock Receptacle 7-Pin with Shorting Cap

HL306,8 Hi-Lo Switching Low Output 30%

HL506,8 Hi-Lo Switching Low Output 50%

AT1 Adjustable Tilt

AS Adjustable Swivel

XX None

1204 120V

2404 240V

2774 277V

347 347V

480 480V

4Specify for HLXX option

Pole Motion Sensor with optional photocell See page 11 for order code

2 347/480V and HLXX options cannot be combined with 5G140

* Based on RI distributions at 3000K CCT no glass

Power Cord Length

8 10 12 14 16 18 XX8’ 10’ 12’ 14’ 16’ 18’ XX’

CO9 Comfort Optics (Not available with PP optics)

* Add length of arm and height of pole to determine power cord length

TLRP8 Twist Lock Receptacle3-Pin with Photocell

IMS6,7

Internal Motion Sensor

273 2700K

1 AT mounting not IDA approved

- - - - - --

-

-

-

- -

- - - - -- - -

- - - - -- - -

- - - - -- - -

5G350 77W/8,561lm

5G530 107W/12,450lm

5G700 148W/15,576lm

5G105 230W/21,623lm

5G1402 306W/25,707lm

Page 2 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Specifications

U6

13 3/4”(350mm)

241/8” (613mm)

Ouray 600 Sistema

4 3/8” (111mm)

1

45 2

1. Fixture Housing - Die cast low copper marine grade aluminum body and door. Optional tempered glass lens.

2. Gasketing - Continuous molded silicone gas-ket provides weatherproofing, dust and insect control at all luminaire connections.

3. Access Door - Die cast low-copper marine grade aluminum door. Hinges open for tooless access to LED light engine and is retained in place with fixed hinge.

4. LED Array - High Flux LEDs mounted to metal core PCB and attached to external heat sink for maximum LED performance and life. CCT tolerance within a 3 step bin and provided with a minimum CRI of 80. LED array has a reported lumen maintenance of 93% at 50,000 hours. L70 calculated greater than 100,000 hours. Exposed face rated to IP65.

5. LED Optics - Technical Optics (R1, R2, R3, R3W, R4, R5S, R5Q, and R5R) use Selux signa-ture light pattern acrylic lens holder to secure proprietary silicone optics. Internal micro house side shield available for distributions types I, II, III and IV. Plane Projector (PP) optics available for uplighting. Comfort Optics (CO) option provided with fully diffuse glass.

6. LED Driver - LEDs are driven by RoHS com-pliant constant current programmable LED driver. Driver includes 0-10V dimming to 10%, meets the requirements of IP66. Driver assembly located inside the head and accessible through the hinged door. 7. Surge Protection - 3-Pole Surge Protection device safeguards electrical components from indirect lighting strikes and surges up to (20kA standard). RoHS compliant.

Exterior Luminaire Finish -Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatmentprocess where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accor-dance with test specifications for coatings from ASTM and PCI.

Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are avail-able, please specify from your Selux color selec-tion guide. Hot Dip Galvanized finish (GV) on all steel parts also available.

5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that Ouray LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the fixture, LED driver and LED light engine when in-stalled and operated according to Selux instruc-tions. Fixture suitable for ambiant temperatures of 45ºC (113ºF). For details and exclusions, see “Selux Terms and Condition of Sale.”

Listings and Ratings: Tested to IESNA LM-79-08 and LM-80 test sandards at 25ºC ambient temperature. Rated for wet location.

Visit selux.us for our LED End of Life recycling policy.

Page 3 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Mounting Details

1 34 "

44mm

3116 "

77mm

4 34 "

120mm

78 "

23mm

1 34 "

44mm

3116 "

77mm

78 "

23mm

4 34 "

120mm

SB Short Pole Bracket

EPA = 0.6ft2 (0.06m2)

Weight = 27lbs. (13kg)

SQ Square Pole Bracket

EPA = 0.6ft2 (0.06m2)

Weight = 27lbs. (13kg)

1 3/4” (44mm)

3 1/16” (77mm)

7/8” (23mm)

4 3/4” (120mm)

1 3/4” (44mm)

3 1/16” (77mm)

7/8” (23mm)

4 3/4”(120mm)

Ouray 600 Sistema

Adjustable arm located between fixture head and fixed mounting.

AT Adjustable Tilt

AS Adjustable Swivel

EPA = 0.1ft2 (0.01m2)

Weight = 2.5lbs. (1.1kg)AT/AS mounting only - Add to primary mounting values.

EPA = 0.1ft2 (0.01m2)

Weight = 2.5lbs. (1.1kg)AT/AS mounting only - Add to primary mounting values.

21516 "

75mm

21516 "

75mm

6 18 "

155mm6 18 "

155mm

21516 "

75mm

2 1516"

75mm

2 15/16” (75mm)

2 15/16”(75mm)

6 1/8” (155mm)

6 1/8” (155mm)

2 15/16” (75mm)

2 15/16” (75mm)

Tilt +/- 90° in 2.5° increments Swivel +/- 90° in 2.5° increments

Page 4 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Ouray 600 Sistema

Use checkboxes provided in chart below. Columns #0 through #9 indicate heights starting with 3" (76mm) + 9" (229 mm) below top of pole and proceeding downwards in increments of 12 inches (305mm). Rows A,G,M, and S indicate angular placement around pole starting with 0° at handhole and proceeding clockwise.

(NOTE: If using Adobe Acrobat to enter data (checks) in chart on right, the following instructions will be carried out automatically)

When specifying non-standard configurations, enter “SB/SQ + total number of arms specified)” on con-figuration matrix on page 1 in the fixture mounting field. Example: SS4 (specifying 4 mounting arms)

Build up the Mounting Arm Location Codes from chart on right (“Height Code” + “Angular Location Code”) i.e. “4G”= 4 feet from top of pole, 90º clockwise from handhole.

Enter Mounting Arm Location Codes on page 1 in the blanks provided that follow the Pole Option blanks. Example: 0A-2G-0M-2S

(1) Pair of Rivnuts required per arm.

ANGULAR LOCATION CODE

CLOCKWISE FROM HANDHOLE

DISTANCE FROM TOP OF POLE

HEIGHT CODE NOTE: Arms mounted at same height level must be spaced apart at 180º, unless AT or AS mounting is specified.

0 1 2 3 4 5 6 7 8 9 xx3'' 1' 2' 3' 4' 5' 6' 7' 8' 9' Distance

from top

A 0º

G 90º

M 180º

S 270º

3” (76mm)

9” (229mm)

12” (305mm)

12” (305mm)

12” (305mm)

12” (305mm)

12” (305mm)

12” (305mm)

12” (305mm)

12” (305mm)

Specify Mounting Configurations(Luminaire shown for illustrative purposes only - not to scale)

Page 5 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Allowable EPA calculated according to AASHTO 1994 and include allowance for 1/3 gust factor. See Mounting Configuration pages for fixture arm weight and EPA values.

Optional Base Covers for PolesDie cast aluminum, two-piece field installable base covers.

Ouray 600 Sistema

BC3 Optional Base Cover (AT535) Die cast aluminum, two-piece field installable base cover.

Ø5” (127mm)

5 3/16” (131mm)

Ø12 7/16” (316mm)

BC9 Optional Base Cover (AT64) Die cast aluminum, two-piece field installable base cover.

81/8” (205mm)

Ø203/8” (518mm)

Ø6” (152mm)

BC10 Optional Base Cover (AT74) Die cast aluminum, two-piece field installable base cover.

Ø20 3/8” (518mm)

8 1/8” (205mm)

Ø7” (178mm)

BC13 Optional Base Cover (A40) Die cast aluminum, two-piece field installable base cover.

Ø12 7/16” (316mm)

5 3/16” (131mm)

Ø4” (102mm)

Pole Data Chart

Pole SeriesBolt

CircleHeight Finish Options90

mph100

mph110

mph120

mph130

mph140

mph150

mph160

mph170

mph180

mph

U-A35 31/2" Round Straight Aluminum Pole 73/4" 2.1 1.2 0.6 - - - - - - - 16 16ft WH White

BK Black

BL Semi-Matte Black

BZ Bronze

SV Silver

SP Specify Premium Color

BC3 Decorative Cast Aluminium Base Cover (AT535)

BC9 Decorative Cast Aluminium Base Cover (AT64)

BC10 Decorative Cast Aluminium Base Cover (AT74)

BC13 Decorative Cast Aluminium Base Cover (A40)

REC GFCI Receptacle with weather-proof cover

REC2 GFCI Receptacle with weather-proof padlockable in-use cover

REC3 USB and Duplex Receptacle with weather proof cover

REC4 USB &and Duplex Receptacle with weatherproof padlockable in-use cover

MS Motion Sensor w/ Optional Photocell

U-A40 4" Round Straight Aluminum Pole 71/2" 8.3 6.2 4.7 3.6 3.0 2.5 2.1 1.7 1.5 1.2

U-AT535 5" to 3.5" Round Tapered Aluminum Pole 85/8" 9.1 6.9 5.4 4.3 3.4 2.9 2.4 2.0 1.7 1.5

U-AT64 6" to 4" Round Tapered Aluminum Pole 91/2" 14.3 11.2 9.0 7.4 6.2 5.2 4.4 3.8 3.3 2.9

U-A40 4" Round straight Aluminum Pole 71/2" 6.6 4.8 3.5 2.6 2.1 1.7 1.4 1.1 0.9 0.7 18 18ft

U-AT535 5" to 3.5" Round tapered Aluminum Pole 85/8" 9.2 7.0 5.4 4.2 3.4 2.8 2.3 2.0 1.7 1.4

U-AT64 6" to 4" Round tapered Aluminum Pole 91/2" 11.9 9.2 7.3 6.0 4.9 4.2 3.5 3.0 2.6 2.2

U-AT74 7" to 4" Round tapered Aluminum Pole 109/16" 17.5 13.8 11.2 9.2 7.7 6.5 5.6 4.8 4.1 3.5

U-A40 4" Round Straight Aluminum Pole 71/2" 5.2 3.7 2.5 1.7 1.3 1.0 0.7 - - - 20 20ft

U-AT535 5" to 3.5" Round Tapered Aluminum Pole 85/8" 7.6 5.6 4.2 3.2 2.5 2.0 1.6 1.4 1.1 0.9

U-AT64 6" to 4" Round tapered Aluminum Pole 91/2" 9.9 7.5 5.9 4.7 3.9 3.2 2.7 2.3 1.9 1.6

U-AT74 7" to 4" Round tapered Aluminum Pole 109/16" 14.9 11.6 9.3 7.6 6.4 5.4 4.5 3.8 3.3 2.8

U-AT64 6" to 4" Round tapered Aluminum Pole 91/2" 6.0 4.2 3.0 2.2 1.7 1.3 1.0 0.8 0.6 - 25 25ft

U-AT74 7" to 4" Round tapered Aluminum Pole 109/16" 9.8 7.4 5.7 4.5 3.6 3.0 2.4 2.0 1.6 1.3

U-AT106 10" to 6" Round tapered Aluminum Pole 141/4" 24.2 19.2 15.5 12.7 10.4 8.6 7.1 5.9 4.8 3.9 30 30ft

U-AT106 10" to 6" Round tapered Aluminum Pole 14 1/4" 18.3 14.4 11.5 9.2 7.4 6.0 4.7 3.6 2.7 2.0 35 35ft

Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.

A35Round Straight Aluminum Pole

AT535 / AT64/AT74/AT106 Tapered Aluminum Pole

A40Round Straight Aluminum Pole

18” (457mm)

26” (660mm)

Pole

Hei

gh

t

18” (457mm)

Pole width3.5"(90mm)

Pole width4"(102mm)

BC5 Decorative Cast Aluminum Base Cover (A35 Pole Only) Die cast aluminum, two-piece field installable base cover.

Ø3.5” (90mm)

5 1/4” (133mm)

Ø12 7/16” (316mm)

Page 6 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

5 5/16" [135mm]

8 15/16" [227mm] SQUARE

Ă3 3/4" [Ă95mm]

Ă7 1/2" [Ă191mm]BOLT CIRCLE

CONDUIT OPENING

HANDHOLE SIDE OF POLE.

BOLT CIRCLE DETAIL (Not to Scale)USE CAUTION WHEN SETTING ANCHOR BOLTS. BOLTS MUST BE VERTICALLY STRAIGHT AND CENTERED ON DIMENSIONS SHOWN.

Bolt Circle for A35 & S35 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown

Anchor Bolt Detail for A35 & S35

3 1/4” (83mm)

3/4” x 17” Partially Galvanized Anchor Bolts

3/4” -10 Galvanized Heavy Hex Nut

3/4” (19mm) ID Galvanized Flat Washers

Concrete footing designed and supplied by others

1/2” (13mm) for leveling

3/4” - 10 Galvanized Heavy Hex Leveling Nut

Bolt Circle for A40 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown

A40 POLE ONLY

Hand Hold Location

8 15/16”(227mm)

Ø7 1/2” (191mm) Bolt Circle

Ø3 3/4” (95mm) Conduit Opening

5 5/16”(135mm)

3 1/4

" [8

2mm

]

1/2" [13mm]FOR LEVELING

3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT

3/4-10 UNC GALVANIZED HEAVY HEX NUT

3/4 I.D. GALVANIZEDFLAT WASHER

3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT

CONCRETE

3/4” -10 UNC x 17" Partially Galvanized Anchor Bolt

3/4” ID Galvanized Flat Washers

Concrete footing designed and supplied by others

3/4” -10 Galvanized Heavy Hex Nut

3/4” -10 UNC Galvanized Hex Leveling Nut

3 1/4” (83mm)

1/2” (13mm) for leveling

Anchor Bolt Detail for A40

Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.

Ă4 1/2" [Ă114mm]

9 5/8" [244mm] SQUARE

Ă8 5/8" [Ă219mm]

6 1/8" [155mm]

CONDUIT OPENING

BOLT CIRCLE

HANDHOLE SIDE OF POLE.

Bolt Circle for AT535 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown

Anchor Bolt Detail for AT535

Hand Hold Location

9 5/8” (244mm)

Ø8 5/8” (219mm) Bolt Circle

Ø4 1/2” (114mm) Conduit Opening

6 1/8” (155mm)

3 1/4

" [8

2mm

]

1/2" [13mm]FOR LEVELING

3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT

3/4-10 UNC GALVANIZED HEAVY HEX NUT

3/4 I.D. GALVANIZEDFLAT WASHER

3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT

CONCRETE

3 1/4” (82mm)

3/4” -10 Galvanized Heavy Hex Nut

3/4” ID Galvanized Flat Washers

Concrete footing designed and supplied by others

1/2” (13mm) for leveling

3/4” - 10 Galvanized Heavy Hex Leveling Nut

3/4” -10 x 17" Partially Galvanized Heavy Hex Nut

Ouray 600 Sistema

A35/S35 POLE ONLY

Hand Hold Location

Ø7 3/4” (197mm) Bolt Circle

Ø3” (76mm) Conduit Opening

8” (203mm)

5 5/16”(135mm)

Page 7 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.

6 3/4" [172mm]

10 5/16" [262mm] SQUARE

Ă5 1/2" [Ă140mm]

Ă9 1/2" [Ă241mm]

CONDUIT OPENING

BOLT CIRCLE

HANDHOLE SIDE OF POLE.

Bolt Circle for AT64 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown

Anchor Bolt Detail for AT64

Hand Hold Location

10 5/16” (262mm) Square

Ø9 1/2” (241mm) Bolt Circle

Ø5 1/2” (140mm) Conduit Opening

6 3/4” (172mm)

3 1/2

" [8

9mm

]

1/2" [13mm]FOR LEVELING

3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT

3/4-10 UNC GALVANIZED HEAVY HEX NUT

3/4 I.D. GALVANIZEDFLAT WASHER

CONCRETE

3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT

3 1/2” (89mm)

3/4” -10 Galvanized Heavy Hex Nut

3/4” ID Galvanized Flat Washers

Concrete footing designed and supplied by others

1/2” (13mm) for leveling

3/4” - 10 Galvanized Heavy Hex Leveling Nut

3/4” -10 x 17" Partially Galvanized Heavy Hex Nut

11 1/4" [286mm] SQUARE

7 1/2" [190mm]

Ă10 9/16" [Ă268mm]

Ă6" [Ă152mm]CONDUIT OPENING

HANDHOLE SIDE OF POLE.

BOLT CIRCLE

Bolt Circle for AT74 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown

Anchor Bolt Detail for AT74

Hand Hold Location

11 1/4” (286mm) Square

Ø10 9/16” (268mm) Bolt Circle

Ø6” (152mm) Conduit Opening

7 1/2” (190mm)

1"-8 UNC X 36" PARTIALLYGALVANIZED ANCHOR BOLT

1" I.D. GALVANIZEDFLAT WASHER

CONCRETE

4 1/8

" [1

05m

m]

1/2" [13mm]FOR LEVELING

1"-8 UNC GALVANIZED HEAVY HEX NUT

1"-8 UNC GALVANIZEDHEAVY HEX LEVELING NUT

4 1/8” (105mm)

1"-8 UNCGalvanized Heavy Hex Nut1” ID Galvanized Flat Washers

Concrete footing designed and supplied by others

1/2” (13mm) for leveling

1"-8 Galvanized Heavy Hex Leveling Nut

1"-8 UNC x 36"Partially Galvanized Heavy Hex Nut

1'-1 3/16" [335mm] SQUARE

10 1/16" [256mm]

Ă1'-2 1/4" [Ă362mm]

Ă9 5/8" [Ă244mm]CONDUIT OPENING

HANDHOLE SIDE OF POLE.

BOLT CIRCLE

Bolt Circle for AT106 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown

Anchor Bolt Detail for AT106

Hand Hold Location

1'-1 3/16” (335mm) Square

Ø1'-2 1/4" (362mm) Bolt Circle

Ø9 5/8” (244mm) Conduit Opening

10 1/16” (256mm)

CONCRETE

1" I.D. GALVANIZEDFLAT WASHER

1"-8 UNC X 36" PARTIALLYGALVANIZED ANCHOR BOLT

4 3/4

" [1

21m

m]

15/16" [24mm]FOR LEVELING

1"-8 UNC GALVANIZED HEAVY HEX NUT

1"-8 UNC GALVANIZEDHEAVY HEX LEVELING NUT

4 3/4” (121mm)

1"-8 UNCGalvanized Heavy Hex Nut

1” ID Galvanized Flat Washers

Concrete footing designed and supplied by others

15/16” (24mm) for leveling

1"-8 UNCGalvanized Heavy Hex Leveling Nut

1"-8 UNC x 36"Partially Galvanized Heavy Hex Nut

Ouray 600 Sistema

Page 8 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Ouray 600 Sistema

Pole Information

Pole Data Chart (For "SQ" mounting only)

9 3/4" [249mm]

4” (102mm)

U-AQ40Square Aluminum Pole

12” (305mm)

Pole

Hei

gh

t

Pole SeriesBolt

CircleHeight Finish Options90

mph100

mph110

mph120

mph130

mph140

mph150

mph160

mph170

mph180

mph

U-AQ40 4" Square Aluminum Pole 9" 9.6 6.8 4.8 3.2 2.0 1.0 - - - - 16 16ft WH White

BK Black

BL Semi-Matte Black

BZ Bronze

SV Silver

SP Specify Premium Color

BC Decorative Cast Aluminium Base Cover

REC GFCI Receptacle with weather-proof cover

REC2 GFCI Receptacle with weather-proof padlockable in-use cover

REC3 USB and Duplex Receptacle with weather proof cover

REC4 USB &and Duplex Receptacle with weatherproof padlockable in-use cover

MS Motion Sensor w/ Optional Photocelll

U-AQ50 5" Square Aluminum Pole 11” 10.7 7.5 5.1 3.3 1.8 0.7 - - - -

U-AQ60 6" Square Aluminum Pole 121/2" 15.8 11.2 7.8 5.2 3.1 1.5 - - - -

U-AQ40 4" Square Aluminum Pole 9” 7.2 4.7 3.0 1.6 - - - - - - 18 18ft

U-AQ50 5" Square Aluminum Pole 11” 7.9 5.0 2.9 1.3 - - - - - -

U-AQ60 6" Square Aluminum Pole 121/2” 11.9 7.8 4.8 2.5 0.7 - - - - -

U-AQ50 5" Square Aluminum Pole 11” 5.4 2.9 1.1 - - - - - - - 20 20ft

U-AQ60 6" Square Aluminum Pole 121/2” 8.5 4.9 2.2 - - - - - - -

U-AQ50 5" Square Aluminum Pole 11” - - - - - - - - - - 25 25ft

U-AQ60 6" Square Aluminum Pole 121/2” 1.5 - - - - - - - - -

3 58 "

92mm

9 1516"

252mm

Ă9 [Ă229mm]

6 3/8 [162mm]

HANDHOLESIDE OF POLE.

3 58 "

92mm

9 1516"

252mm

Ă9 [Ă229mm]

6 3/8 [162mm]

HANDHOLESIDE OF POLE.

3 58 "

92mm

9 1516"

252mm

Ă9 [Ă229mm]

6 3/8 [162mm]

HANDHOLESIDE OF POLE.

3 5/8(92mm)

Ø9"(229mm)

6 3/8"(162mm)

9 5/16"(252mm)

Handholeside of pole

4 5/8(117mm)

Ø11"(279mm)

7 3/4"(198mm)

11 9/16"(294mm)

Handholeside of pole

5 5/8(143mm)

Ø1’ 1/2"(318mm)

8 3/16"(225mm)

1’ 3/4"(324mm)

Handholeside of pole

Square Pole Anchor Bolt Template Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown.

3 1/8” (79mm)

1/2” (13mm)

for leveling

3/4-10 UNC x 17" partially galvanized anchor bolt

3/4-10 UNC galvanized heavy hex nut

3/4 I.D. galvanized flat washer

3/4-10 UNC galvanized heavy hex leveling nut

Concrete

3/4-10 UNC x 17" partially galvanized anchor bolt

3/4-10 UNC galvanized heavy hex nut

3/4 I.D. galvanized flat washer

3/4-10 UNC galvanized heavy hex leveling nut

Concrete

3 1/4” (82mm)

1/2” (13mm)

for leveling

1"-8 UNC x 36" partially galvanized anchor bolt

1"-8 UNC x 17' galvanized heavy hex nut

1" I.D. galvanized flat washer

1"-8 UNC galvanized heavy hex leveling nut

Concrete

3 1/4” (82mm)

1/2” (13mm)

for leveling

Base Cover (BC)Optional Base Cover

(U-AQ40)

OPTIONAL BASE COVER

OVERALL HEIGHT

9 3/4" [249mm]

13” (330mm)

Square

OPTIONAL BASE COVER

OVERALL HEIGHT

9 3/4" [249mm]

6 1/2” (165mm)

4” (101.6mm)

OPTIONAL BASE COVER

OVERALL HEIGHT

9 3/4" [249mm]

13” (330mm)

Square

OPTIONAL BASE COVER

OVERALL HEIGHT

9 3/4" [249mm]

6 1/2” (165mm)

5” (127mm)

OPTIONAL BASE COVER

OVERALL HEIGHT

9 3/4" [249mm]

14.5” (330mm)

Square

OPTIONAL BASE COVER

OVERALL HEIGHT

9 3/4" [249mm]

7 1/2” (184mm)

6” (152.4mm)

Optional Base Cover(U-AQ50)

Optional Base Cover(U-AQ60)

Anchor Bolt Detail for Square Pole

4" 5" 6"

Page 9 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Wiring Diagrams

Standard Wiring (120V-480V)*

DRIVER(S) /LIGHT ENGINE

SURGEPROTECTOR

BLACK

WHITE

BARE

RED

ORANGE

L1

N

DIM(+)

DIM(-)

FROMFEEDCORD

TLRP1 Wiring (120V/240V/277V)

FROMFEEDCORD

L1

N

DIM(+)

DIM(-)

BLACK

WHITE

BARE

RED

ORANGE

SURGEPROTECTOR

DRIVER(S)/LIGHT ENGINE

TLRP1

RED

WHITE

GREEN

BLACK

WHITE

GREEN

BLACK

WHITE

GREEN

DIM (-)

DIM (+)

BROWN

ORANGE

CAPPEDINSIDE

FIXTURE

CAPPEDINSIDE

FIXTURE

FROMFEEDCORD

L1

N

SPARE

SPARE

BLACK

WHITE

BARE

RED

ORANGE

SURGEPROTECTOR

DRIVER(S) /LIGHT ENGINE

TLR/TLRP2/TLRP3

RED

DIM (+)

DIM (-)

WHITE

GREEN

TLR/TLRP2/TLRP3 Wiring (120V-480V)*

Hi-Lo Switching Option (HL30/HL50) Wiring120/240/277V. When red is energized, light output will beat "Lo" level.

SURGEPROTECTOR

BLACK

WHITE

BARE

ORANGE

RED

L1

N

SPARE

L2

FROMFEEDCORD

RELAY

DRIVER(S) /LIGHT ENGINE

CAPPEDINSIDE

FIXTURE

* (347/480V with 5G350 has a transformer - not shown)

Ouray 600 Sistema

Page 10 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

(REC) GFCI RECEPTACLE DETAIL (120V)

(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)

GFCI Receptacle (REC) - 120V 15A GFCI duplex receptacle with weather-proof, self-closing cover; located 36” (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. For use with 120V applica-tions only. For use with luminaires with other than 120V rating, please consult factory for wire segregation.

(REC) GFCI RECEPTACLE DETAIL (120V)

(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)

GFCI Receptacle (REC2) - 120V 15A GFCI duplex receptacle with weather-proof, self-closing, padlockable in-use cover; located 36” (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. For use with 120V applications only. For use with luminaires with other than 120V rating, please consult factory for wire segregation.

2 3/4” (70mm)

4 1/2” (114mm)

5/8” (15mm)

3 9/16” (91mm)

6 11/16” (170mm)

2 1/4” (58mm)

Ouray 600 Sistema

USB & Duplex Receptacle (REC3) (not shown) - 120V 15A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5 Amp, 5 Volt USB outlets. With weather-proof, self-closing cover; located 36" (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.

Note: Must be used in conjunction with GFCI breaker by others

USB & Duplex Receptacle (REC4) (not shown)- 120V 15A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5 Amp, 5 Volt USB outlets. With weather-proof, self-closing padlockable in-use cover; located 36" (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.

Note: Must be used in conjunction with GFCI breaker by others

39 16"

91m

m

C L

31 2"89

mm

C L

35 8"92

mm

C L

OUR

AY

400

OUR

AY

500

OUR

AY

600

REV

ISIO

NS

REV

.EC

ND

ESC

RIPT

ION

DA

TEBY

APP

R BY

DREV.

MA

TERI

AL:

SEE

BO

M

PRO

DUC

T SE

RIES

:

R

DWG

SIZ

E

THIS

DRA

WIN

G IS

THE

PRO

PERT

Y O

F SE

LUX

CO

RPO

RATIO

N A

ND

IS

PRO

TEC

TED

BY

CO

PYRI

GHT

LA

W. I

T M

AY

ON

LY B

E C

OPI

ED O

R RE

PRO

DUC

ED W

ITH P

RIO

R, W

RITT

EN A

UTHO

RIZA

TION

FO

R TH

E PU

RPO

SE O

F M

AN

UFA

CTU

RIN

G A

ND

/OR

SUBM

ISSI

ON

FO

R SE

LUX

CO

RPO

RATIO

N.

DW

G. #

: IM

SFI

NIS

H:

OUR

AY

- IM

S SE

NSO

R V

IEW

S

T (8

45) 6

91-7

723

F (8

45) 6

91-6

749

DA

TE: 1

1/26

/201

8

SCA

LE: 1

:2

DRA

WN

BY:

SHEE

T: 1

OF

1

TOLE

RAN

CES

UN

LESS

OTH

ERW

ISE

NO

TED

:D

ECIM

AL

INC

H:

.XX

.02"

.X

XX

.010

"

DEC

IMA

L M

ETRI

C:

X.X

.5

X.XX

.25

FRA

CTIO

NS:

1/

32 [.

79m

m]

AN

GUL

AR:

1

1/2

5 LU

MEN

LA

NE

P.O

. BO

X 10

60HI

GHL

AN

D, N

Y 12

528

CHE

CKE

D B

Y:

APP

ROV

ED B

Y:

Internal Motion Sensor (IMS Option)• WattStopper FSP-211• WattStopper FSP-L3• FSIR-100 Remote (supplied separately)

FSIR-100 Remote

3 9/16(91mm)

Optional Accessories

TWIST LOCK RECEPTACLE WITH PHOTOCELL (TLRP)

212 "

63mm

Ă 2 78 "

74mm

Ø 2 7/8” (74mm)

2 1/2” (63mm)

TWIST LOCK RECEPTACLE (TLR)

2 38 "

60mm

Ă 2 78 "

73mm

Ø 2 7/8” (73mm)

2 3/8” (60mm)

Pole (Generic view)

(TLPC) 3-Pin Twist Lock Receptacle with Photocell (TLR) 7-Pin Twist Lock Receptacle with shorting cap

TLR = 7-Pin Twist Lock Receptacle with Shorting Cap TLPC = TE Connectivity BF Series (BF-PV) 3-Pin

Page 11 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

12"305.00

OVERALLPOLEHEIGHT

Hand Hole Location

TYPE 27 (270°)

TYPE 18 (180°)

TYPE 09 (90°)

HAND HOLELOCATION

TYPE 00 (0°)

TOP VIEW

SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°IN 90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)

DREV.

DWG SIZE

TYPE 27 (270Ā)

TYPE 18 (180Ā)

TYPE 09 (90Ā)

HAND HOLDLOCATION

TYPE 00 (0Ā)

TOP VIEW

SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0ĀIN 90Ā INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)

POLE DEPICTED IS GENERIC PLEASEREFERENCE CUSTOMER ORDER

FOR SPECIFIC POLE MODEL NUMBERTYPE 18 SHOWN

SCALE: 1:16

ADRAWN BY: FAH

DRW

JLJ

REVISIONSREV. ECN DESCRIPTION DATE BY APPR BY

01 XXXX CREATED FOR MARKETING 09/21/2016 FAH DRW

A 0017.17TO DETAIL MODIFICATION TOPOLES AND COLUMNS FOR

SENSOR MOUNTING ORIENTATIONLOGIC

07/12/2017 FAH DRW

12"305.00

NOMINALPOLE

HEIGHTMINUS 12"

NOMINALPOLE HEIGHT

HAND HOLELOCATIONA

4 X Ă .136 3.45 THRU8-32 UNC THRU

2 X Ă .188 4.76 THRU

2.00050.80

3.00076.20

1.00025.40

.50012.70

3.50088.90

3.25082.55

1.62541.28

1.75044.45

1.00025.40

DETAIL ASCALE 1 : 1

MATERIAL: SEE BOM

PRODUCT SERIES:

R

THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND ISPROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED ORREPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THEPURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUXCORPORATION.

DWG. #: 6-48B323-00FINISH: PER SO

EXTERIOR SENSOR POLE MOD REFERENCE

T (845) 691-7723F (845) 691-6749

DATE: 9/21/2016

SHEET:1 OF 2

TOLERANCES UNLESS OTHERWISE NOTED:DECIMAL INCH:

.XX ā .02"

.XXX ā .010"

DECIMAL METRIC:

X.X ā .5X.XX ā .25

FRACTIONS: ā 1/32 [.79mm] ANGULAR: ā 1 1/2 Ā

5 LUMEN LANEP.O. BOX 1060HIGHLAND, NY 12528

CHECKED BY:

APPROVED BY:

ES01

A

General Pole Drawing For Example Only

OverallPole

Height

TYPE 27 (270°)

TYPE 18 (180°)

TYPE 09 (90°)

HAND HOLELOCATIONTYPE 00 (0°)

TOP VIEW

SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)

Sensor angular orientation from hand hole 0°

90° increments clockwise around pole (Type 00,09,18,27)

Pole Motion Sensor

The Selux outdoor rated sensor incorporates Passive Infrared (PIR) technology for motion sensing and also includes a built in photocell. Designed to mount directly through a 1/2” KO in a single gang faceplate on pole/column, the SBO utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size while preventing false tripping from the environment.

Series Optics Hand Hole Orientation Program Color Photocell

Feature Voltage

MS

Motion Sensor

1 270° coverage - Single Sensor

00D0 (0V=0%)

WH WhiteY Yes UNV

09 D1 (1V=10%) BK Black N No 347

18 D3 (3V=30%)BZ Bronze

480

27 D5 (5V=50%)

NOTE: Motion sensor comes programmed at 30% dimmed level with a 5 min. delay as default. All programming required after shipping by others.

12”(305mm)

Ouray 600 Sistema

Page 12 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

• 100% Digital PIR Detection, excellent RF Immunity

• 270° coverage pattern

• Up to 30ft mounting

• IP66 Rated for outdoor applications

• Built-in 1kV surge protection

• No minimum load requirements

• Made for LED light source

• Interchangeable hot and load wires - impossible to wire backwards

• Adjustable time delays, max/min dim levels and ramp rates

• Programming button accessible without opening sensor or removing gaskets

• No field calibration or sensitivity adjustments required

• Non-volatile setting memory

• Convenient test mode

• Suitable for Title 24 applications.

Motion Sensor Wiring Diagram

Pole Motion Sensor

LINECORD

BLKWHTBLKVIO

SBO SENSORGRY

GRN

WH

T

BLK

BLK

WH

TG

RN RED

ORG

BLK

WH

TG

RN

ORGRE

D

FIXT

URE

FEED

CO

RD

WEATHERPROOF WIRE CONNECTOR,600V 18-8GA

(SUPPLIED)

ATTACH CORD TO BACK OF SENSOR MOUNTING PLATEWITH 2 ZIP TIES (NOT SUPPLIED)

Ouray 600 Sistema

Page 13 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Photometry

Ouray 600 Sistema

Catalog #: U6-R1-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8561lmInput Watts: 77W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 4573 at 57.5° from vertical.IES classification: Type IIMounting Height: 20’ (6 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%

R1 Optics / 77W LED / 3000K CCT

Catalog #: U6-R2-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8624lm Input Watts: 77W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 4554 at 60° from vertical.IES classification: Type III Mounting Height: 20’ (6 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%

R2 Optics / 77W LED / 3000K CCT

Catalog #: U6-R5R-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8598lm Input Watts: 77W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 5480 at 62.5° from vertical.IES classification: Type III Mounting Height: 20’ (6 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%

R3 Optics / 77W LED / 3000K CCT

Page 14 of 14 (Rev. 02/2020) ORY6S_ss_v6.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Photometry

Ouray 600 Sistema

Catalog #: U6-R4-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8699lm Input Watts: 77W Efficacy: 112 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 5607 at 62.5° from vertical.IES classification: Type IIIMounting Height: 16’ (4.9 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%

R4 Optics / 77W LED / 3000K CCT

Catalog #: U4-R3W-5G350-30-XX-UNV Delivered Lumens: 12036lmInput Watts: 126W Efficacy: 96 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 4092 at 40° from vertical.IES classification: Type VSMounting Height: 16’ (4.9 m)BUG Rating: B3-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%

R3W Optics / 126W LED / 3000K CCT

Catalog #: U6-PP-XX-XX-5G350-30-XX-UNV Delivered Lumens: 7693lm Input Watts: 77W Efficacy: 99 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 4225 at 55° from vertical.IES classification: Type IIIMounting Height: 20’ (6 m)BUG Rating: B2-U0-G1Power Factor: 0.998Total Harmonic Distortion: 10.5%

PP Optics / 77W LED / 3000K CCT

*Complete photometric matrix is available for download from website along with all House Shield photometry.