Click here to load reader
Upload
osculati-spa
View
600
Download
159
Embed Size (px)
DESCRIPTION
The most complete catalogue of Europe, with more than 900 pages and 18000 products
Citation preview
43
33
- Moo
ring b
uoys
, fend
ers
Mooring buoys, fenders3Marina and pile fenders made of solid injection moulded soft EVA This fender ensures maximum protection against shocks and atmospheric agents. Does not leave residues or stains on boats even in case of violent shocks. Can be mounted on concrete quays and floating pontoons.
Marina fenders | Docking fenders | Pontoon Marina and pile fenders
Code mm Colour Type33.519.02 800x90x45 blue THREE33.519.03 730x175x140 blue MAXFENDER33.519.33 730x175x140 white MAXFENDER33.519.04 900x250x180 blue BIGFENDER33.519.44 900x250x180 white BIGFENDER33.519.05 800x230x310 blue ANGLE33.519.06 800x90x70 blue ZERO SYSTEM33.519.07 1000x300x160 blue MEGA 133.519.08 330x250x110 blue BEND FENDER33.519.09 800x450x30 blue COVER FENDER
33.519.03/33
33
.519.0
3/33 33.519.03/33
33.519.03/33
33
.519.0
5
33.519.05
33.519.04
33
.519.0
4/44
33.519.04
33.519.07
33.519.08
33
.519.0
8
33.519.
02
33
.519.0
2
33.519.09
33.519.06
33.519
.06
33.519.02
33.519.0
5
33.519.07
33.5
19.0966 www.OSCULATI.com
33 - Mooring buoys, fenders
Mooring buoys, fenders 33
Buoys Buoy series CCSupplied without central rod.
PolyformModel Colour Thrust Tie-rods OPTIONAL Tie-rod total length
White Fluo red redeye
cm in kg lbs long standard Long Standard
CC2 33.603.01 33.602.01 36 14 25 55 2.5 10 33.613.01 33.612.01 104 73CC3 33.603.02 33.602.02 47 18.5 55 121 3.6 4 33.613.02 33.612.02 124 89CC4 33.603.03 33.602.03 55 21.5 85 187 5.4 4 33.613.03 33.612.03 152 96CC5 33.603.04 33.602.04 70 27.5 170 375 10.5 2 33.613.04 33.612.04 166 112CC6 - 33.602.05 86 34 350 770 16 2 33.613.05 33.612.05 243 115
Blown polyethylene buoysSpecially suited for small boats or for temporary mooring.
Buoys Buoys White Yellow Red Floating l Height cm33.170.00BI 33.170.00GI 33.170.00RO 10 39
Two-cone blown polyethylene buoysFitted with double ring on one side; available colours: orange, white or yellow.
Buoys Buoys Colour Litre size cm Orange White Yellow
33.171.10AR 33.171.10BI 33.171.10GI 5 22x4933.171.11AR 33.171.11BI 33.171.11GI 9 27x6033.171.12AR 33.171.12BI 33.171.12GI 15 32x8033.171.13AR 33.171.13BI - 55 50x103
Blown polyethylene buoys with through-rod Filled with expanded polyurethane; swivelling stainless steel rings.
BuoysColour Litres Useful thrust kg
mm
Rod mm White Red
33.168.01BI 33.168.01RO 25 13 320x800 1333.168.02BI 33.168.02RO 55 28 500x1030 13
Two-cone reinforced ABS bicoloured buoyColours white and red; fitted with central seal made of black soft PVC; very sturdy central rod.Filled with polyurethane foam, resistant to hydrocarbons, unsinkable; available sizes according tothe buoyancy litre capacity.
Buoys Buoys Code Litre size cm Height cm Pole mm33.171.20 18 33 63 1233.171.35 37 45 75 1233.171.63 53 51 82 1233.171.99 85 60 98 12
White/red ABS buoyFilled with polyurethane, unsinkable, fitted with steel central rod.
Buoys Buoys Code mm Thrust kg mm33.172.13 700 125 1833.172.14 1000 355 24467Sailing with you, since 1958
43
33
- Moo
ring b
uoys
, fend
ers
Mooring buoys, fenders3Reflective self-adhesive tapeIdeal for marking any obstacles or over-hang areas; can be used on boat-trailers, tenders, life jackets,buoys, IOR signals or any other object. Available colours: red or white. From 15/02/85, the use is required for all buoys in Lombardy waters under Order 8862/83.
Reflecting tapes Colour Roll White Red
33.110.00BI 33.110.00RO 2.5 m x 25 mm 2
Polythene buoys fitted with central holeSuitable for fences or run enclosures; available colours: white, orange or yellow.
Buoys Buoys White Yellow Red mm
Internal bore mm
Height mm
Thrust kg
33.136.00BI 33.136.00GI 33.136.00RO 170 20 145 1.733.135.20BI 33.135.20GI 33.135.20RO 260 30 190 8.5
Diver and racing buoys
Racing buoyMade of inflatable PVC , bright orange colour, specially designed to signal the turns on sailingraces, size 80cmx120h.
Buoys Diver and racing buoysCode cm Colour33.174.00 80x120h orange33.174.01 80x120h yellow
Giant racing buoysMade of inflatable PVC, bright orange colour; fitted with two fast inflating/deflating valves and 4 lowermooring fairleads; include transparent size-pocket for advertising messages, size 100x70cm.
Buoys Diver and racing buoysCode cm Colour33.175.01 90 x 150 h orange33.175.11 90 x 150 h yellow33.175.02 150 x 160 h orange33.175.22 150 x 160 h yellow
33.166.01
33.166.03
Inflatable diver signal buoyFitted with inflatable flag.
Scuba buoysCode Version cm Total height cm Hooking rope OPTIONAL33.166.01 MINI 38 50 33.167.0133.166.03 BIG 38 63 33.167.0133.166.05 "TORPEDO" 28 88 33.167.01
33.166.05
"Levilene" floating rope suitable for diver signal buoy33.167.01 Size 4mm x 20 meters.
Buoys Diver and racing buoys68 www.OSCULATI.com
34 - Oars
Oars Boat hooks Oars and paddles Hooks and clips for oar-holders and general purpose applications Sockets and rowlocks
PM
Boat hooks Nylon boat hooksFitted with anodized aluminium pole and handle.
Mooring hooks Boat hooks Length cm Handle mm130 160 210
34.459.13 34.459.16 34.459.01 25
Black Polypropylene boat hookVery sturdy grip,gold anodized aluminium pole with rubber handle.
Mooring hooks Boat hooks Code Handle mm Length cm Spare hook34.171.50 30 185 34.171.40
Boat hook with mirror polished lacquered wooden pole Mooring hooks Boat hooks Code Material hook Stick mm Total length m Spare hook
34.459.11 chromed brass 30 2 34.171.3034.459.08 stainless steel 30 2 34.171.3534.459.12 chromed brass 36 2.6 34.171.2034.459.09 stainless steel 36 2.6 34.171.25
Aluminium telescopic boat hook, BASE typeGrey nylon boat hook, anodized aluminium handle, double knob grip.
Boat hooks Boat hooks
Code Min/max length cm Pipes mm34.458.90 120/212 25/30
COLOR telescopic boat hookGrey nylon hook, epoxy resin coated aluminium handle with double knob grip.469Sailing with you, since 1958
Mooring hooks
Code Colour Min/max length cm Pipe mm34.458.80 White 120/210 25/3034.458.81 Blue 120/210 25/30
34.458.80
34.458.81
43
34
- Oar
sOars4
Aluminium telescopic boat hooks
White nylon hook, anodized aluminium pole and white polished rubber handle; very light, it floats,adjustable in all positions with its special cam.
Mooring hooks Boat hooks Code Length min/max cm Pipe mm34.459.00 100/200 25/3034.459.02* 60/100 25/30
* Suitable for safety kits.
TRI-TELESCOPIC boat hookMade of mirror polished anodized aluminium, with nylon hook and handle; very sturdy, made with3 sturdy concentric tubes; can be adjusted in any position with its cam.
Mooring hooks Boat hooks Code Length min/max cm Pipe mm34.460.00 115/285 25/30/35
34.915.41/42
34.915.41/42
Professional telescopic boat hookMade of anodized aluminium, natural finish (includes hook). Its rotation locking device enables fast locking at any point, very sturdy.
Mooring hooks | Boat hookCode Model Length min/max cm Shaft section mm34.915.41 Bi-telescopic (2 pipes) 120/209 25/2934.915.42 Tri-telescopic (3 pipes) 105/245 25/29/32
34.915.41
34.915.42
Professional telescopic boat hook with rollerMade of anodized aluminium, includes hook.
Mooring hooks | Boat hook | Boathook Boat hooks Code Model Length min/max cm Shaft section mm34.916.41 Bi-telescopic 120/209 25/2934.916.42 Tri-telescopic 105/245 25/29/32
Professional boat hookMade of natural anodized aluminium with anti-skid bi-component technolpolymer hook. Quick lock in all positions via rotation.
Boat hooksCode Version Min-max length cm Pole section mm34.917.42 tri-telescopic (3 poles) 90-240 25/29/3234.917.43 tri-telescopic (3 poles) 142-360 25/29/3270 www.OSCULATI.com
34 - Oars
Oars 34
Watch the video
Use
Easy Mooring telescopic boat hookPATENT 1) Allows the operator to hook the eye of the buoy and retrieve the mooring line witha single movement.
2) It can also be used as boat hook.3) Easy extension in less than 1 second.Technical Features:- Telescopic extension from 1 to 2.4 m with a single movement (double telescopicextension).- Made from carbon fibre and polycarbonate.- Extremely light.- Floating.- Fluorescent for night use.- Completely rust-proof.- Optional accessories can be added.
Boathook| Telescopic Boat hook | Mooring line Code Description34.458.50 Complete Easy mooring34.458.51 Spare mooring hook34.458.52 Spare closing connecting rod
Black polypropylene boat hook
Very sturdy grip. Mooring hooks white black Hole size mm
34.171.40BI 34.171.40NE 30
Boat hooks in chromed brass
Mooring hooks Boat hooks Code Hole mm For wooden rods mm
34.171.20 32 3534.171.30 27 30
Stainless steel AISI 316 boat hooks
AISI 316
Mooring hooks Boat hooks Code Hole mm For wooden rods mm34.171.25 34 35/3634.171.35 28 30
Boat hook with stainless steel bayonet34.459.14 Includes a 160 mm snap hook and a plate that can fitted into any boat hook; the buoy caneasily be handled, secure docking, weight of 80 + 350 grams.
Mooring hooks
Oars and paddlesABS paddles34.459.30 Meets safety regulations required for boats that navigate 1 mile from the coast;specially designed for surf-boards; can be stacked; clip-on mounting with 3 special pins.
Paddles Oars and paddles
Mini telescopic emergency paddlePaddle and handle made of bright orange plastic to be easily visible, anodized aluminium pole.Especially suited for life rafts and small tenders
Paddles Oars and paddlesCode pole mm mm34.459.18 22-25 55 x 107
Mini telescopic paddlePaddle and handle made of black plastic, anodized aluminium pole. Epoxy-resin coated.
Telescopic paddle | Mini paddle
Code Poles mm cm34.459.19 29-25 70-118
Telescopic paddleWhite ABS blades, white nylon boat hook, anodized aluminium handle. Practical and very sturdy.
Paddles
Oars and paddles
Code Handle mm Length min/max cm34.459.20471Sailing with you, since 1958
30 90/160
43
34
- Oar
sOars4
Paddles with white ABS blade and nylon boat hook handleAluminium pole, very functional and sturdy.
Paddles
Oars and paddles
Code Length cm Handle mm34.459.24 130 3034.459.25 160 30
Demountable telescopic oar with boat hookImpact-resistant plastic blade, silver anodized aluminium pole.
Oars Oars and paddlesCode mm
Length mmmin max
34.452.20 30/35 80 180
Anodized aluminium demountable oars
Fitted with white plastic blade. Version with two similar slugs when disassembled.Oars
Oars and paddles
Code mm Length cmtot ball handle
34.453.13 35 132 67 7534.453.16 35 160 92 7534.453.19 35 180 102 85
Anodized aluminium oars
Fitted with white plastic blade, pole and handle.Oars
Oars and paddles
Code Length cm mm34.454.01 190 3534.454.02 160 35
Assembling oars, suitable for inflatable boats Impact-resistant grey plastic blade, aluminium anodized silver pole.
Oars
Oars and paddles
Code mm
Length cmtot blade handle
34.452.13 35 132 55 8534.452.15 35 147 55 10034.452.17 35 167 55 120
Demountable canoe/kayak paddlesMade of anodized aluminium with ABS pole
Paddles
Code Length mm Handle mm Technical characteristics34.470.11 150 28 It can be disassembled into 2 pieces34.470.12 220 28 It can be disassembled into 2 pieces, the paddles can rotate by 75
34.470.11
34.470.1272 www.OSCULATI.com
34 - Oars
Oars 34
Canoe paddlesMade of anodized aluminium with ABS blades.
Paddles
Oars and paddles
Code Type Length cm Handle mm34.470.01 simple 152 3034.470.02 double, blade at 90 215 30
Professional kayak paddleFitted with oval anodized aluminium pole, perfect grip.
Kayak paddle
Code Version Length cm Pipe mm34.471.02 double 210 32
Twin canoe jointed paddles34.470.03 Can be used as two single paddles 150 cm each or 215 cm long if used as a double kayak paddle.
Paddles Oars and paddles
Laminated wood paddlesMirror lacquered polyurethane coating, with rubber handle.
Paddles
34.447.00 34.447.02
Code Length cm Code Length cm34.447.00 141 34.447.02 157
Evaporated beech jointed oarsVery sturdy, lacquered with polyurethane, they can be taken apart at the stainless steel joint.
Rowing
Oars and paddles
Code mm Length m34.456.25 46 2.534.456.30 46 3
Wooden paddlesGlass lacquered polyurethane; very sturdy, fitted with plastic collar; fine finish.
Oars
Oars and paddles
fir with curved blade* handles mm steamed beech handles mm mahogany with curved blade handles mm Length m- - 34.446.18 36 1.8- 34.455.20 46 34.446.20 36 234.458.22 46 34.455.22 46 34.446.22 36 2.2- - 34.446.24 36 2.4534.458.25 46 34.455.25 46 - 2.5- 34.455.30 46 - 3
* Its a true oarsmans paddle
Ash Jointed OarsMade of European ash, fitted with stainless steel clip-on joint; very sturdy, perfect finish.
Rowing
Oars and paddles
Code Length m mm34.454.16 1.65 3634.454.19 1.90 3634.454.21 2.10 36473Sailing with you, since 1958
43
34
- Oar
sOars4
Hooks and clips for oar-holders and general purpose applications
34.355.xx 34.355.xx
Plastic Spring Clips suitable for holding heavy oars, paddles or boat hooks C-Clips | Spring clips
mm white black
20 34.354.03 34.355.03 1025 34.354.04 34.355.04 1030 34.354.05 34.355.05 1035 34.354.00 34.355.00 1040 34.354.01 34.355.01 1045 34.354.02 34.355.02 10
Nylon Spring ClipsTo be mounted with 2 screws.
C-Clips | Spring Clips Hooks and clips for oar-holders and general mm white black17/23 34.354.25 34.355.25 1022/28 34.354.28 34.355.28 1027/35 34.354.34 34.355.34 1034/45 34.354.44 34.355.44 10
Spring clips, suitable for holding poles, oars, boat awnings, boat hooks,fishing rods, etcMade from UV stabilized black Santoprene, sturdy and very elastic. 10-pcs packs.
Spring Clips white black For pipe mm
34.358.16 34.358.17 16/18 1034.358.19 34.358.18 19/20 1034.358.22 34.358.23 22/24 1034.358.25 34.358.26 25/26 1034.358.28 34.358.29 28/30 1034.358.38 34.358.39 37/40 10
Stainless steel spring clips to lock boat hooks, fishing-rods, etc.. Spring Clips | Oar storage Hooks and clips for oar-holders and general purpose applicationsCode For pipe mm
34.357.00 30/35
Mirror polished stainless steel holding hooks for boat hooks
34.212.30 Suitable for holding any type of boat hooks with from 22mm to 32mm; sold in pairs.Mooring hooks Hooks and clips for oar-holders and general purpose applications
Stainless steel spring clips, suitable for holding boat hooks,fishing poles, etc.
34.356.00 Fits 25/32 mm poles, sold in pairs. Spring clips | Retaining Clips Hooks and clips for oar-holders and general purpose applications
Spring clips for fixing boat hooksStainless steel + nylon
Spring Clips Hooks and clips for oar-holders and general Code Universal for mm Kit34.359.00 25/35 2 pcs
Folding Storage bracket for boat hooks/fishing rodsMade of electro-polished S.S., with foldable nylon support
Clips Hooks and clips for oar-holders and general purpose applicationsCode Base mm For boat hooks mm34.357.20 55x71 32/3574 www.OSCULATI.com
34 - Oars
Oars 34
Storage bracket for boat hooksPATENT/
BREVETTATODesigned for sailing boats, to be installed on staysails or shrouds. One of the housings has an internal spring keeping the boat hook underpressure.
AISI 316Oar-holding clipsCode For handles mm
34.459.10 28/32
Multipurpose fixing clipIt can be fixed to a bulkhead by a screw, or snap-hooked to the pulpit (for pipes 22/28 mm). It can be used to hang clothes to dry, ropes, electric cables and any other object. Made of white nylon + stainless steel spring.
Fixing clips Hooks and clips for oar-holders and general purpose applicationsCode34.358.00 4
Hooks with suction cupsTwo white nylon hooks with transparent suction cup
Rope holders | Multipurpose storage Hooks and clips for oar-holders and general purpose applicationsCode mm34.212.50 70
34
.346.0
1
34
.346.0
2
BATSYSTEM Pivoton multipurpose storage systemBREVETTATO/
PATENTThe kit consists of a RAILGRIP bracket for 25-mm hoses plus a range ofstorage solutions to combine with the bracket system.
Boat storage | Hooks and clips for oar-holders and general purpose applicationsCode Product description Colour34.346.01 Railgrip hooking White/blue34.346.02 Button for wall mounting White34.347.01 Mug/can/bottle holder 70-mm White/blue34.347.02 SS thermos flask/bottle holder 90-mm White/blue34.347.03 Object holder White/blue34.347.04 SS hook 50x100 mm White/blue34.347.05 SS hook 85x140 mm White/blue34.347.06 Nylon cordura bag 230x310 mm Dark blue
34.347.02 34.347.05
34.347.06 34.347.03
34.347.03 34.347.01 34.347.04/05
34.347.01
BATSYSTEM RailcupThis handy mug hooks over the 25-mm pulpit very easily. The hook also serves as a handle.
BATSYSTEM | Glass and can holders Hooks and clips for oar-holders and general Code Colour34.348.01 White/blue475Sailing with you, since 1958
43
34
- Oar
sOars4
Super clothes pegsMade of plastic, their ingenious safety system avoid the peg from opening even in the most difficultsituation. Stainless steel internal spring.
Rope holders Hooks and clips for oar-holders and general purpose applicationsCode mm Colour Package34.358.20 100x33 white 8 pcs
Stainless steel hooking system for ropes, electric cables, water pipes, etc. Rope holdersCode Description
34.360.01 Version for screw mounting. 4 pcs kit complete with stainless steel cable
Sockets and rowlocksPlastic Collars for oars
Oars Sockets and rowlocksCode inner mm Code inner mm34.565.01 34/35 34.565.03 43/4434.565.02 39/40 34.565.04 53/54
34.170.14 34.170.18
Rowlock and socketMade of chromed brass.
Rowlocks Sockets and rowlocksCode Description Fork mm Stem mm mm34.170.14 rowlock 64 14 -34.170.18 bushing - - 110x55x40 (overhang)
Chromed brass rowlock, suitable for small fishing boatsIncludes bushing with 2 holes 34.430.13.
Rowlocks Sockets and rowlocksCode Total length mm Pin mm34.150.01 150 12
Chromed brass rowlocksJust the rowlock.
Rowlocks | RowingCode stem mm
mm Bushing OPTIONALA B C
34.430.00 12 38 48 68 34.170.16; 34.430.1334.170.11 12 41 53 72 34.170.16; 34.430.1334.170.12 14 41 59 72 34.170.17; 34.430.14; 34.430.1534.193.00 14 51 68 98 34.170.17; 34.430.14; 34.430.15
Side Socket for chromed brass rowlocks Rowlocks Sockets and rowlocksCode Hole mm mm For rowlocks
34.170.16 12 50x38x21 34.430.00; 34.170.1134.170.17 14 50x38x21 34.170.12; 34.190.00
34.430.13 34.430.15
Socket for chromed brass rowlocks Rowlocks | Rowlock socket Sockets and rowlocksCode Hole mm For rowlocks
34.430.13 2 60x23 34.430.00; 34.170.11; 34.150.0134.430.14 4 60x35 34.170.12; 34.193.0034.430.15 2 80x30 34.170.12; 34.193.0076 www.OSCULATI.com
34 - Oars
Oars 34
Chromed brass rowlock with blind socket
Includes blind socket, specially suited for plastic boats with interspace; the rowlockhas a bayonet fitting; this product is a perfect alternative to most plastic rowlocks thatbreak easily; the socket has a wide area for covering any pre-existing plastic socketholes.
Rowlocks Sockets and rowlocksCode Stem mm A mm B mm34.160.10 12 42 5234.160.11 12 46 56
Nylon rowlocks
Very sturdy and light, white colour. Rowlocks Sockets and rowlocksCode Stem mm A mm B mm
34.432.00 15 34 53
JARNFORDLINGS Delrin rowlocksSnap-on fitting.
RowlocksCode A mm B mm34.435.01 38 4534.435.02 42 56
34.435.03 Nylon socket, flush mount 34.435.04 Nylon socket, wall mount
34.4
35.03
34.4
35.04
Sockets for nylon rowlocks RowlocksFlush mount Wall mount For rowlocks
34.435.03 34.435.04 34.435.01-02
Black nylon rowlock
Floating, type Rio 3,10/4,10; includes bayonet socket. Rowlocks Sockets and rowlocksCode For legs mm A mm B mm
34.437.00 12 32 46
Special chromed brass rowlock
Foldable inner stringer, suitable for all types of boats, convenient, trouble-proof. Rowlocks Sockets and rowlocksCode Stem mm A mm B mm
34.433.00 12 42 50
34.430.12
Chromed brass rowlocks for inflatable tenderFor inflatables removable oars for rubber row boat
Rowlocks Sockets and rowlocksCode Pin length mm Type of dinghy34.430.10 35 Zodiac34.430.12 23 Lomac, Bat, Radial, Nova, Reeves, Axemar, Asso and Nuova Jolly
34.430.10 34.430.11
Plastic rowlocks for inflatable tendersFitted with brass snap-on pin for paddle 35 mm.
Rowlocks | Accessories for inflatables Sockets and rowlocksCode mm Length mm34.430.06 12 3534.430.08 12.5 26.534.430.09 12 23
34.430.09 34.430.08 34.430.06477Sailing with you, since 1958
4- Wind
indi
cato
rs, fl
ags,
key r
ings
Wind indicators, flags, key rings Windex and wind indicators Flags, "Gran Pavese" flags and burgees Flag poles Key rings and document holders Signals
PM
Windex and wind indicatorsWINDEXThe famous Swedish wind indicator fitted with arrows, mounted onto a stone for sliding movement;very sensitive and stable, fitted with a bowline corner indicator; comes in an elegant package.
WindexCode Type Arrow mm Resing base35.388.01 "DINGHI" and sports boat 23035.388.02 "15" up to 11 m 380 35.388.06* OPTIONAL35.388.03 up to 15 m boat 584
* To mount WINDEX 15 on the side or on the top of the mast.
Small resin baseMount WINDEX 15 on the side or on the top of the mast.
Windex Windex and wind indicatorsCode For wind vane35.388.06 35.388.02
Wind indicator Wind indicator strips35
78 www.OSCULATI.com
To be mounted on the side of the mast with a bayonet bracket. Counter-weight balance; indicates minimal wind; framed fag to avoid inaccurate indications.
Wind indicators Windex and wind indicatorsCode Material size mm35.387.00 stainless steel with nylon flag 160x100.
Made of nylon with Velcro fastener, red/green pairs, packed in cardboard displays.
Wind indicators Windex and wind indicatorsCode Type35.660.01 normal 1 red + 1 green35.660.02 large 1 red + 1 green
Tell Tales kit for sail trimming
35.662.00 14 wind indicator strips (7 red ones + 7 green ones), made of ultra lightnylon, mounted onto the sail with adhesive disks; help optimize sail adjustment.
Tell tales | Windex and wind indicators
TELL TALES for sail trimming
35.661.00 Permanent wind indicator strips. Package content: 16 self-adhesive discs, 8 red strips, 8 blue strips.
Sail trimming | tell tales Windex and wind indicators
35 - Wind indicators, flags, key ringsWind indicators, flags, key rings 35 Flags, "Gran Pavese" flags and burgeesItalian ensign made of heavy polyester
Indelible colour, intense tone; sewn internally with nylon thread, fitted with the coat-of-arms of the MerchantNavy (on both sides) with bright clear colours; include nylon line for mounting; top quality product.
Flags Flags, "Gran Pavese" flags and burgeesCode cm Code cm Code cm35.453.01 20x30 35.453.05 60x90 35.453.08 130x20035.453.02 30x45 35.453.15 70x100 35.453.09 150x22535.453.03 40x60 35.453.06 80x12035.453.04 50x75 35.453.07 100x150
FRENCH flag KitKit includes the three required flags N+C+ French flag.
Flags Flags, "Gran Pavese" flags and burgeesCode cm Category35.446.10 30x40 3a/4a/5a35.446.20 50x75 2a/1a
Italian ensign made with light polyesterFitted with the coat-of-arms of the Merchant Navy.
Flags Flags, "Gran Pavese" flags and burgeesCode cm35.459.01 20x3035.459.02 30x45
Italian courtesy flag made of polyester35.453.00 Without the coat-of-arms of the Merchant Navy; size 20x30.
Flags Flags, "Gran Pavese" flags and burgees
Self-adhesive Italian ensignFitted with the coat-of-arms of the Merchant Navy, on both sides; polished crystal model, brightlong-lasting colours.
Flags Flags, "Gran Pavese" flags and burgeesCode cm Code cm35.452.80 11x16 35.452.82 30x4535.452.81 20x30 35.452.83 15x22
Sardinia Corsica Sicily
Campania Toscana
Italian Regional flagsMade of polyester bunting, printed with indelible colours.
Flags Region 20x30 30x45Corsica 35.451.01 35.451.02
Elba 35.418.01 35.418.02Sardinia 35.443.01 35.443.02
Sicily 35.427.01 35.427.02Tuscany 35.425.01 35.425.02
Venetian BurgeeMade of polyester.
Flags Flags, "Gran Pavese" flags and burgees12x24 cm 22x46 cm 30x60 cm35.479.01 35.479.02 35.479.03
European Union
European Union flagMade of polyester, indelible colours.
Flags Flags, "Gran Pavese" flags and burgeesType 20x30 30x45EU + Italy (corner) 35.440.01 35.440.02European Union 35.461.01 35.461.02479Sailing with you, since 1958
43
35
- Wind
indi
cato
rs, fl
ags,
key r
ings
Wind indicators, flags, key rings5Flag - Austria
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.455.01 35.455.02 35.455.03 35.455.04 35.455.05
Flag - Belgium
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.471.01 35.471.02 35.471.03 35.471.04 35.471.05
Flag - Croatia
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.457.01 35.457.02 35.457.03 35.457.04 35.457.05
Flag - Denmark
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.431.01 35.431.02 35.431.03 - -
Flag - Egypt
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.436.01 35.436.02 35.436.03 - -
Flag - Arab Emirates
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.434.01 35.434.02 35.434.03 - -
Flag - Finland
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.433.01 35.433.02 35.433.03 - -
Flag - France
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.456.01 35.456.02 35.456.03 35.456.04 35.456.05
Flag - Germany
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.454.01 35.454.02 35.454.03 35.454.04 35.454.05
Flag - Greece
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.452.01 35.452.02 35.452.03 35.452.04 35.452.05
Flag - UK merchant
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.449.01 35.449.02 35.449.03 35.449.04 35.449.05
Flag - Kuwait
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.435.01 35.435.02 35.435.03 - -
Flag - Malta
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.439.01 35.439.02 35.439.03 - -
Flag - Norway
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.432.01 35.432.02 35.432.03 - -80 www.OSCULATI.com
35 - Wind indicators, flags, key ringsWind indicators, flags, key rings 35Flag - The Netherlands
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.448.01 35.448.02 35.448.03 35.448.04 35.448.05
Flag - Poland
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.463.01 35.463.02 35.463.03 - -
Flag - Portugal
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.437.01 35.437.02 35.437.03 - -
Flag - Russia
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.460.01 35.460.02 35.460.03 35.460.04 35.460.05
Flag - Slovenia
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.441.01 35.441.02 35.441.03 35.441.04 35.441.05
Flag - Spain
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.450.01 35.450.02 35.450.03 - -
Flag - Sweden
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.429.01 35.429.02 35.429.03 - -
Flag - Switzerland
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.458.01 35.458.02 35.458.03 35.458.04 35.458.05
Flag - Tunisia
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.438.01 35.438.02 35.438.03 - -
Flag - Turkey
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.442.01 35.442.02 35.442.03 35.442.04 -
Flag - Ukraine
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.462.01 35.462.02 35.462.03 35.462.04 35.462.05
Flag - Hungary
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.465.01 35.465.02 35.465.03 - -481Sailing with you, since 1958
43
35
- Wind
indi
cato
rs, fl
ags,
key r
ings
Wind indicators, flags, key rings5Flag - The USA
Made of polyester, indelible colours.Flags 20x30 30x45 40x60 50x75 70x100
35.444.01 35.444.02 35.444.03 35.444.04 -
Scuba diving flag
Made of polyester.FlagsCode cm
35.480.01 20x3035.480.02 30x45
35.4
45.04
35.4
45.01
35.4
46.01
35.4
45.05
Signal flags made of woolen fabricSizes cm 20x30; wool material.
FlagsCode Description Version35.445.04 A Underwater35.445.01 C -35.446.01 N -35.445.05 Q -
"Gran Pavese" flags set40 piece set with international navigation codes, made of polyester, printed with bright colours,includes rope.
Flags Flags, "Gran Pavese" flags and burgeesCode cm35.453.10 14x2035.453.11 20x3035.453.12 30x45
Pocket container for "Gran Pavese" flags35.453.13 Made of 100% cotton; designed to store all Gran Pavese flags (Art. 35.453.10/11),maximum size of 20x30cm.
Flags Flags, "Gran Pavese" flags and burgees
40 "Gran Pavese" flags with bag35.453.20 The flags comply with the International Navigational Code; each set includes rope, mountingtoggle and clear letters sewn on the side; comes in an elegant foldable bag; flag size 30x42cm.
Flags Flags, "Gran Pavese" flags and burgees
Gran Pavese flag set made of heavy nylon
Includes bag made of the same material; high quality product.
Flags Flags, "Gran Pavese" flags and burgeesCode cm35.370.00 23x3035.370.01 30x4535.370.10 45x60
International code table, printed onplywood board
Made of marine plywood. Signals Flags, "Gran Pavese" flags and burgeesCode mm
35.452.89 400x290
Type-approved protest flags
Made of etamine, backstay mounting with Velcro, red colour, letter "B", size 20x30cm.
Flags Flags, "Gran Pavese" flags and burgeesCode mm35.660.80 200x30082 www.OSCULATI.com
35 - Wind indicators, flags, key ringsWind indicators, flags, key rings 35 Flag poles
Stainless steel conical flagstaff
FlagstaffCode Length cm For flags cm mm Base OPTIONAL35.195.00 40 max 20x30 14 35.390.03; 35.390.1135.196.00 60 max 40x60 20 35.390.12
Teak-wood flagstaffORIGINAL TEAK
Flagstaff Flag polesCode Length cm71.607.50 6071.607.52 7571.607.54 9071.607.56 120
35.390.13 Stainless steel flag pole
35.390.03
35.390.11-12-13
Spare stainless steel base Flagstaffs Flag polesCode For poles
mmCan be used with poles Material
35.390.03 14 35.390.00; 35.195.00 Chromed plastic35.390.11 14 35.390.02; 35.195.00 AISI 316 stainless steel35.390.12 20 35.390.01; 35.392.01; 35.196.00 AISI 316 stainless steel35.390.13 25 35.390.10; 35.392.02; 35.392.03; 35.392.04; 71.607.50; 71.607.52; 71.607.54; 71.607.56 AISI 316 stainless steel
Stainless steel conical flagstaffsMirror polished finish, includes base; fitted with adjustable flag mounting rings; supplied with toprubber bumper; very sturdy. All models include butterfly locking nut. Raked to 60.
FlagstaffsCode Length cm
For flag cm
mm
Base made of Spare base Just the pole
35.390.00 40 max 20x30 14 chromed ABS 35.390.03 35.195.0035.390.02 40 max 20x30 14 stainless steel 35.390.11 35.195.0035.390.01 60 max 40x60 20 stainless steel 35.390.12 35.196.0035.390.10 80 max 60x90 25 stainless steel 35.390.13 -35.390.15 120 max 80x120 25 stainless steel 35.390.13 -
Mirror polished stainless steel flagstaff with hook flag fitting
PATENT AISI 316
Stainless steel terminal ball, stainless steel ends and eyelets, suitable for flags.
FlagstaffCode Length mm mm Base OPTIONAL35.392.01 610 20 35.390.12; 35.390.2035.392.02 750 25 35.390.13; 35.390.2535.392.03 900 25 35.390.13; 35.390.2535.392.04 1200 25 35.390.13; 35.390.25483Sailing with you, since 1958
43
35
- Wind
indi
cato
rs, fl
ags,
key r
ings
Wind indicators, flags, key rings5
Flag poles, wing-shape sectionPATENT Made of mirror polished AISI 316 stainless steel.
Bayonet fixing to our bases 35.390.20/25.
AISI 316
Flag poles Flag polesCode Length mm Section mm Clamp holders35.392.50 610 38x24 35.390.2035.392.51 750 38x24 35.390.2035.392.52 900 45x29 35.390.2535.392.53 1200 45x29 35.390.25
Flush recessed flagstaff socketAISI 316 Made of mirror polished AISI 316 stainless steel; clip-on base fitting.
PATENT
Flagstaff Flag polesCode Base mm Depth mm For poles35.390.20 60x45 40 35.392.0135.390.25 60x45 40 35.392.02; 35.392.03; 35.392.04
Flagstaff sleeve socketAISI 316 Designed for mounting onto a pushpit rail; made of mirror polished AISI 316
stainless steel.
Flagstaff Flag polesCode Pulpit pipe mm For poles mm35.394.02 25 20/2535.394.03 30 20/25
Flagstaff, pushpit or handrail mountingMade of mirror polished stainless steel; includes flag mounting rings and unbreakable terminal ball.
Flagstaffs Flag polesCode Length cm For pipes/handrails mm35.391.00 40 22/25
Flagstaff socket, pushpit or handrail mounting
Made of chromed brass, clamp fitting; universal for all poles with of 22/25mm. Flagstaff Flag polesCode Pole mm
35.191.14 1435.191.20 20
Flagstaff socket with reduced rake
Made of chromed brass, 10 inclination, the other bases from this series have a 30inclination.
Flagstaff Flag polesCode For poles mm35.158.01 2035.158.02 2584 www.OSCULATI.com
35 - Wind indicators, flags, key ringsWind indicators, flags, key rings 35 Key rings and document holders
Key rings 35.825.xx, 35.824.xx, 35.823.xx, 35.822.xx, 35.821.xx can be customized with ones own logo or image.
Floatable cord for sunglasses
Key rings Key rings and document holdersCode Description35.818.00 Made of soft lacquered floating rubber, available in various colours.
Floatable document holder
Made of nylon fibre with floating polyethylene sheets; functional and very sturdy;made with customers logo upon request for at least 100 pieces.
Waterproof holders Key rings and document holdersCode cm35.776.50 20x2535.776.51 25x35
Floating key-chains with floating corkFitted with keyring top.
Key ringsCode Shape Size mm
35.841.00 ball 50 1035.841.10 double ball 50 1035.841.20 ball 35 1035.841.30 oval floater 105x50x25 10
"Monkeys fist" key ring35.820.00 Made of coloured braided nylon, includes mirror polished brass shackle 5 mm.
Key rings Key rings and document holders
EUROCOVER floating key ring, fender shape "Polyform
35.508.00 Includes shackle and golden brass chain, holds up to five keys; can beused for marketing, for printing the shipyards logo, the number of cabin, hotel roomsetc, size 80x30 mm.
Key rings Key rings and document holders
Hoisting block key ring
35.828.00 Made of Tufnol and stainless steel.Key rings Key rings and document holders
35.839.00
35.831.00
Pendant polished brass key rings Key rings Code Shape Code Shape Code Shape
35.831.00 Propeller 35.837.00 Lamp 35.839.00 Bell
35.835.00 Diving helmet 35.838.00 Whistle
6 sailor-shaped key rings
35.528.06 Height 50 mm.Key rings Key rings and document holders
Patented floating key ring
35.830.00 Fitted with small internal PVC pocket, which inflates by chemicalreaction when the key ring falls into the water, thus taking the keys afloat. Compact sizes (thickness 56x40x16mm) holds up to 120 grams when activated.
Key rings Key rings and document holders485Sailing with you, since 1958
43
35
- Wind
indi
cato
rs, fl
ags,
key r
ings
Wind indicators, flags, key rings5
35.825.98 - example of customised key ring with 1-colour print
35.825.99 - example of customised key ring with 4-colour print
Soft rubber floating key ringFitted with brass chain. Convenient and practical, it holds two large keys or three small ones.Logo customized printing.
Key rings
Code Description/Colour Screen printing
35.825.00 Mixed colours Standard 1035.825.01 White Standard 1035.825.02 Blue Standard 1035.825.03 Red Standard 1035.825.04 Yellow Standard 1035.825.05 Green Standard 1035.825.06 Fuchsia Standard 1035.825.07 Orange Standard 1035.825.08 Grey Standard 10
35.825.98* 1-colour print customized key rings. Add printing system code 35.825.91 Customized 300
35.825.99 4-colour print customized key rings Customized 200
* 35.825.91 Printing system.
35.823.98 - example of customised key ring with 1-colour print
35.823.99 - example of customised key ring with 4-colour print
Soft foam motorboat key rings, motorboat versionFitted with brass chain. Convenient and practical, it holds two large keys or three small ones.Logo customized printing.
Key rings
Code Description/Colour Screen printing
35.823.00 Mixed colours Standard 1035.823.01 White Standard 1035.823.02 Blue Standard 1035.823.03 Red Standard 1035.823.04 Yellow Standard 1035.823.05 Green Standard 1035.823.06 Fuchsia Standard 1035.823.07 Orange Standard 10
35.823.98* 1-colour print customized key rings. Add printing system code 35.825.91 Customized 300
35.823.99 4-colour print customized key rings Customized 200
* 35.825.91 Printing system.
35.822.98 - example of customised key ring with 1-colour print
35.822.99 -example of customised key ring with 4-colour print
Soft foam sail boat key ringsFitted with brass chain. Convenient and practical, it holds two large keys or three small ones.Logo customized printing.
Key rings
Code Description/Colour Screen printing
35.822.00 Mixed colours Standard 1035.822.01 White Standard 1035.822.02 Blue Standard 1035.822.03 Red Standard 1035.822.04 Yellow Standard 1035.822.05 Green Standard 1035.822.06 Fuchsia Standard 1035.822.07 Orange Standard 10
35.822.98* 1-colour print customized key rings. Add printing system code 35.825.91 Customized 300
35.822.99 4-colour print customized key rings Customized 200
* 35.825.91 Printing system.86 www.OSCULATI.com
35 - Wind indicators, flags, key ringsWind indicators, flags, key rings 35
35.824.98 - example of customised key ring with 1-colour print
35.824.99 - example of customised key ring with 4-colour print
Genuine American key ringsFitted with brass chain. Convenient and practical, it holds two large keys or three small ones.Logo customized printing.
Key ringsCode Design of the outboard brand Screen printing
35.824.00 Mixed Standard 1035.824.01 Evinrude Standard 1035.824.02 Johnson Standard 1035.824.03 Mercury Standard 1035.824.04 Yamaha Standard 1035.824.05 Mariner Standard 1035.824.06 Suzuki Standard 1035.824.07 Honda Standard 1035.824.08 Tohatsu Standard 1035.824.09 Selva Standard 10
35.824.98* 1-colour print customized key rings. Add printing system code 35.825.91 Customized 300
35.824.99 4-colour print customized key rings Customized 200
* 35.825.91 Printing system.
35.821.98 - example of customised key ring with 1 colour print
35.821.99 - example of customised key ring with 4-colour print
Soft foam anchor key ringsFitted with brass chain. Convenient and practical, it holds two large keys or three small ones.Logo customized printing.
Key ringsCode Description/Colour Screen printing
35.821.00 Mixed colours Standard 1035.821.01 White Standard 1035.821.02 Blue Standard 1035.821.03 Red Standard 1035.821.04 Yellow Standard 1035.821.05 Green Standard 1035.821.06 Fuchsia Standard 1035.821.07 Orange Standard 10
35.821.98* 1-colour print customized key rings. Add printing system code 35.825.91 Customized 300
35.821.99 4-colour print customized key rings Customized 200
* 35.825.91 Printing system.
Soft foam steering wheel key ringAvailable in various colours
Key ringsCode
35.827.00 10
35.511.01 35.511.04
35.511.05
Mini-fender floating key ring Made of flexible PVC, the customers logo may be printed; size 28x80mm (length).
Key rings Standard fender * Spherical fender ColourHead Body
35.511.01 35.511.03 blue white35.511.02 35.511.04 blue red35.511.05 - red white
* Specific logo on request487Sailing with you, since 1958
43
35
- Wind
indi
cato
rs, fl
ags,
key r
ings
Wind indicators, flags, key rings5 SignalsNautical code stickers variousHard wearing and high clarity
Stickers | Code flags | knots Signals
Code Chart type cm35.452.90 Intenational codes with symbols 11x1735.452.91 most common Knots 24x1635.452.92 International code with simbols and the meaning of the flags 16x2435.452.93 International codes, intelligent signals, danger repeaters 16x2435.452.95 Country Flags 16x2435.452.96 Nocturnal signals and light semaphores, accident and storm signal 16x2435.452.97 Acoustical signals of the international codes 16x2435.452.98 Race signals of the international code 16x2435.452.99 Marine Code International Navigation Standards meaning of buoys, right of way, emergency signals,navigation lights, warning lights, harbour entry lights, tide warning signals 24x1635.453.80 Racing course, standardized signal racing flags and section where to write information 24x16
35.452.91
35.452.90 35.452.92 35.453.80 e 35.452.99
35.452.96 35.452.93 35.452.98 35.452.95 35.452.97
Self-adhesive WC labels
35.453.82 Made of PVC, with warning signals for marine WC purposes, 120mm.Italian language, only.
Compass card label
35.452.87 150-mm . Italian language, only.Signals Signals
35.464.01 35.464.02
Type-approved EC labelsMade of red PVC on white background; required for EC boats. Italian language, only.
Signals SignalsCode Figure mm35.464.01 Extinguisher 100x8035.464.02 Self-inflating 127x8088 www.OSCULATI.com
36 - Cleaning kits, canvasses
36
Cleaning kits, canvasses
Cleaning accessories SHURHOLD boat cleaning material YACHTICON cleaning products
SHURHOLD boat cleaning materialHigh-quality product, very sturdy, specifically designed for boat usage, 100% rust-proof.
36.833-855.00
36.730-740-760.00
Aluminium handlesTriple anodized aluminium, clip-on fitting; fixed or telescopic version.
Brushes SHURHOLD boat cleaning materialCode Length cm Type Code Length cm Type36.730.00 76 fixed 36.833.00 109/183 telescopic36.740.00 102 fixed 36.855.00 160/274 telescopic36.760.00 153 fixed
Handle adaptors
36.101.00 Threaded adapter suitable for standardthread brushes
Brushes SHURHOLD boat cleaning material
Handle adapters
36.102.00 30 sloped, the two end holes provide a180 rotation.
Brushes SHURHOLD boat cleaning material
Handle extension
36.103.00 Length 76 cm. Brushes SHURHOLD boat cleaning material
Hooks to recover line and bight36.569.06 Threaded adapter 36.101.00 required
*NO*489Sailing with you, since 1958
ScrubbersFitted with a polyurethane lacquered marine wooden structure, anti-shock corners, fibrepremium, light alloy clip-on connector; available in 2 different sizes.
BrushesBrush 10" Brush 6" Fibertype material
36.990.00 36.950.00 hard white polyester36.985.00 36.955.00 medium yellow polyester- 36.970.00 soft blue nylon36.980.00 36.960.00 soft yellow polyester- 36.965.00 soft + medium red polyester
36.965.00
36.965.00
43
36
- Clea
ning k
its, c
anva
sses
Cleaning kits, canvasses6Scrubbers suitable for difficult applicationsUseful for cleaning windshields, hulls, rudders; fitted with long fibres.
Brushes SHURHOLD boat cleaning materialBrush Fiber8" Round 5" type material
36.310.00 - soft blue nylon36.308.00 36.050.00 soft yellow polyester
HAMMERHEAD SOFT scrubber36.945.00 Can either be used by hand or with any clip-on SHURHOLD handle; designed formaximum comfort, fitted with side cushion; suitable for hull or deck cleaning.
Brushes SHURHOLD boat cleaning material
MocioFitted with light alloy clip-on connector.
Brushes SHURHOLD boat cleaning materialCode Version36.112.00 classical and low cost36.118.00 made of rayon, universal model36.113.00 synthetic chamois, extra assorbing36.117.00 made of synthetic leather, very efficient
Glass wipersMade of stainless steel, fitted with clip-on connector.
Brushes Length mm complete windshield washer only spare rubber254 36.141.00 36.151.50305 36.141.20 36.151.51407 36.141.60 -610 36.142.40 -
Patented water removing bladeThe flexible blade can also follow curved surfaces.
Cleaning kits SHURHOLD boat cleaning materialCode Description36.142.65 Handle36.142.60 Flexible blade length 300 mm adjustable at 180
Swivel scrubber with clip-on connector DIP and GO
36.170.01 Scrubber without pad.It matches pads 36.170.10; 36.170.20; 36.170.30.
Brushes
Synthetic polish wool pad
36.171.00 To put over scrubber 36.170.01 Brushes
Abrasive pads Brushes SHURHOLD boat cleaning materialCode Abrasion Colour To be applied onto a brush
36.170.10 light white 36.170.01 236.170.20 medium black 36.170.01 236.170.30 heavy brown 36.170.01 2
SHURHOLD gaff hook
36.180.40 Fitted with safety protection. SHURHOLD SHURHOLD boat cleaning material
Boat hook attachment
36.190.10 Three in one model. SHURHOLD SHURHOLD boat cleaning material90 www.OSCULATI.com
36 - Cleaning kits, canvasses
Cleaning kits, canvasses 36
36.947.03
36.947
.04
36.947.02
Manual SHURHOLD brushesIdeal for cleaning the waterline, propellers, teak decks, difficult angles, canvasses, rusted areas onstainless steel pulpits, etc...
Brushes SHURHOLD boat cleaning materialCode model Version36.947.01 276 fitted with extra-long handle 50cm36.947.02 274 with short handle36.947.03 272 with soft side bumper andhandle suitable for handling high pressure36.947.04 270 "type light" especially suitable for carpets, canvas, covers, frabrics, etc..
36.947.01
Fishing netsMade of stainless steel, clip-on mounting.
Fishing netsCode landing net Size36.182.20 long small, cm 30x33x3836.182.00 long long, cm 43x51x7636.182.25 fine big, cm 43x51x76
SHURHOLD - Broom
36.120.00 Angled design. Light and compact. Designed for hard-to-reach places. Broom
WASH MITTS
Cleaning accessories | SHURHOLD SHURHOLD boat cleaning materialCode Description36.285.00 Made of lambwool. Top quality. Excellent for washing and cleaning, either dry or wet.
Wiping cloth and synthetic sponges Cleaning kits | SHURHOLDCode Description
36.220.00 Extra large (43x69 cm) absorbing/wiping cloth, it absorbs 50% more than shammy leather36.210.00 Extra absorbing synthetic sponge (17.5x7.5 cm)
Magic Wool scrubbing padFine bronze wool brush. Removes rust and oxidation from stainless steel, brass and metals without leaving scratches. Also suitable for cleaning solar panels and removing limescale deposits from glass and ceramics.Code Description36.286.00 Pack of 3
Pipe Cleaner36.287.00 Flexible brush to clean 12-25mm pipes, flexible pvc hose, electric cables and all other types of tubes. 491Sailing with you, since 1958
43
36
- Clea
ning k
its, c
anva
sses
Cleaning kits, canvasses6PM
Cleaning accessoriesAnodized aluminium telescopic brush with rotational closing tap.Easy to use, sturdy, fitted with shock-proof, anti-slip rubber handle; supplied with hose connector located at the end of the brush to allow water flow direct to the area beingcleaned; medium strength brush, suitable for all surfaces.
Brushes
Code Version Handle Brush mm length cm mm
36.190.00 STANDARD 100/170 19/22,5 200x90x7036.190.02 DE LUXE* 100/170 22/25 240x90x160
* With double edged brush and window cleaning squeegee blade.
36.190.00 36.190.02
Cleaning kit36.302.15 Includes: one telescopic mooring hook (75/130cm) + 1 cotton mop + one heavy fiber brush;all items are interchangeable.
Brushes
Hooks to recover line and bight36.569.06
*NO*
Abrasive brush with nylon handle36.330.02 Removes vegetation and rust on metals; medium strength; cushion size 150x90mm.
Brushes Cleaning accessories
Natural chamois leather DAINO SALTFull leather treated with special tanning for salty environments; the way natural leather dries cannotbe compared to that of synthetic leathers.
BrushesCode Size36.215.02 giant (0,45/0,60 m2, approx cm 60/70 x 70/85)*36.215.01 large (0,35/0,42 m2, approx cm 45/55 x 65/75)*
* As they are full leathers the sizes are aproximate
Synthetic leatherHigh absorbtion. It comes in an elegant tube case.
Cleaning accessoriesCode cm36.216.00 40x70
MocioSuper-absorbing synthetic material mocio.
Cleaning accessories Cleaning accessoriesCode Connection36.218.00 European standard screw connection92 www.OSCULATI.com
36 - Cleaning kits, canvasses
Cleaning kits, canvasses 36
Paper clothTNT cloth with cellulose ideal for cleaning, especially for plexiglass or glass windscreens and glazedpartitions.
Cleaning accessories Cleaning accessoriesCode cm36.214.00 25 sheets 40x36
Boat hook attachment with rollersMade of polished stainless steel, equipped with 2 thermopolymer rollers, to allow movement along theboat once the mooring line has been retrieved. The attachment snaps onto all aluminium handles SHURHOLD, SWOBBIT, BLUE MARICNE, etc....
Cleaning accessories | Boat hook Cleaning accessoriesCode mm36.720.00 250x250
Special handle fitted with rubber suction pads36.184.00 Suitable for attaching into the boat during cleaning operations or for external maintenanceworks.
Brushes Cleaning accessories
Reinforced PVC hose on rollerABS roller, equipped with nozzle and gun.
Cleaning kitsCode Pipe length m external cm Gun spray joint OPTIONAL36.703.00 15 35 x 11 36.188.99; 36.189.00; 36.189.01; 36.189.02
Chromed brass joint36.189.06 Suitable for connecting two hoses.
Brushes Cleaning accessories
Boat washing spray hose and accessories Brushes | Spray hose | Spray gun | jet wash Cleaning accessoriesCode Description
36.189.00 spray spare made of ABS, boat washer with adjustable jet, fitted with lock/unlock distribution lever; female thread 1/236.189.01 Male joint 3/4 screw-in on gun spray 36.189.0036.189.02 Snap in joint 1/2, with flow lock if gun spray not inserted; can be used from the spray gun from the tap side.36.189.03 Female hose adaptor with thread size 136.189.04 Female hose adaptor with thread size 3/436.189.05 reducing coupling for adapting joint 36.189.02 size 3/4 with tap size 1/2
Spray hose with 7 jet types
36.188.98 Fitted with tank for automatic shampoo dispensing. Soft rubber handle. Including trigger joint.
Cleaning kits Cleaning accessories
Boat washing spray gun
36.188.99 Professional metal pistol coated with anti-shock rubber. Adjustable jet with lock/unlock evaporation lever; supplied with snap-on joints36.189.01.
Brushes Cleaning accessories
Boat washing kitIncludes: white PVC 12x18mm hose with polyester reinforced fiber, high pressure , resistant up to15 BAR + adjustable water-jet pistol with clip-on connectors and 3 clip-on water joints.
BrushesLength 15 m Length 25 m Joints36.464.15 36.464.25 1/2 - 3/4 - 1"493Sailing with you, since 1958
43
36
- Clea
ning k
its, c
anva
sses
Cleaning kits, canvasses6
YACHTICON cleaning productsYACHTICON Ship Shape cleaning kit36.303.00 It includes: 1) two-piece light alloy handle - 2) mooring hook - 3) Tampico brush with sideprotrusion to reach corners, medium strength, high water absorption capacity, it can be used withwater and cleansing agents - 4) Scrub brush, suitable for cleaning decks and horizontal surfaces. Forinterior use it can be combined with traditional floor absorbing rags - 5) Mop: made of microfiber onone side and sponge on the other. It can be used by hand with or without water for delicate areas - 6)Comfortable Canvas bag, suitable for carrying all the above items.
Cleaning kits | Yachticon
YACHTICON anodized light alloy handle with water flow system YachticonCode cm
36.569.01 150
YACHTICON telescopic handle made of light alloy with QuickRelease hook Telescopic handle | Yachticon | Yachticon Code cm
36.569.00 75/180
YACHTICON boat hooks36.569.05
Yachticon | Cleaning kits
Hooks to recover line and bight36.569.06
*NO*
YACHTICON oval brush with medium nylon fibreSuitable for a deep clening of the deck, central water flow system.
Yachticon | Cleaning kitCode mm36.560.01 200x135x90
36.560.12
36.560.10 36.560.11
USA-type brushPainted wooden body with perimetral rubber buffer, central water flow system.
Yachticon | Cleaning kitsCode cm Fibre36.560.10 200x85 SOFT36.560.11 200x85 MEDIUM36.560.12 200x85 HARD
36.561.12
36.561.10 36.561.11
Brush with plastic body Yachticon | Cleaning kitsCode cm Fibre
36.561.10 210x55 SOFT36.561.11 210x55 MEDIUM36.561.12 210x55 HARD94 www.OSCULATI.com
36 - Cleaning kits, canvasses
Cleaning kits, canvasses 36
36.565.01 36.565.02
Abrasive pad holder made of nylonTo clean bottom, deck, bulbs, rudder, etc. Fitted with special quick hooks to secure the abrasive pads.
Yachticon | Abrasive pad holdersCode mm Version36.565.01 232x92 For manual use36.565.02 225x92 To be mounted on handle 36.569.00
36.566.01 36.566.02
36.566.03
Abrasive cleaning pads
Abrasive pad | Cleaning kitCode Colour Type Use mm36.566.01 Black HARD - energetic abrasion Rust, barnacles, paint, etc. 260x115
36.566.02 Blue MEDIUM - regular abrasion Surface algae 260x115
36.566.03 White SOFT - light abrasion General cleaning 260x115
Cleaning gloveMicrofibre on one side and sponge on the other.
Yachticon | GloveCode Type36.566.05 GLOVE
Yachtion Microfibre Wash Mit36.566.10 Made with hundreds of soft microfibre strands to give you high cleaning power with littleeffort. Ideal for cleaning large surfaces quickly.
Microfibre mit | Cleaning kit
YACHTICON Magic SpongeImpregnated with highly efficient detergent, just add water to remove algae, black streaks, limescale,rust, tea/coffee stains, and grime from the waterline. Also to be used to clean RIB tubes, PVC surfaces, glass, toilets, basins and other surfaces.
Sponge | Cleaning kitsCode mm36.566.08 120x60x55
YACHTICON Window Cleaner36.566.06 Ideal for cleaning large windows, removes all types of dirt. Suitable for use with brush 36.569.01 with water flow
Window cleaners | Cleaning kits
Yachticon Scrubbing BrushBrush with medium resistance bristles. Ideal for cleaning hard to reach areas.
Brush | Cleaning kitsCode Dimensions36.566.14 180x50x45
YACHTICON soft fibre brush with handle36.475.01 Suitable for cleaning glass, portlights and other delicate surfaces. Ergonomic plastic handle. Brush 250 x 70 mm
Brush | Cleaning kits
495Sailing with you, since 1958
437 - S
crew
s and
nuts
Screws and nuts Bolts and screws in packs Boxes with assorted screws Stainless steel screws Stainless steel nuts, bolts and screws: A4 - AISI 316 Stainless steel nuts, bolts and screws: A2 - AISI 304 Fixing parts: pins, clamps and screw covers
PM
Bolts and screws in packsStainless steel bolts and screws (A4). All packs are sold at the same price. Packs are supplied with description of the content in 4 languages and barcode.
Bolts and screws in packs - Pan head selftapping screws DIN 7981 / Tapping screws, raised countersunk head with cross recessDIN 7983 / Slotted countersunk flat head screws DIN 963 + nut DIN 934 + washer DIN 125 / Hex head screws DIN 933 + nut DIN 934+ washer DIN 125
Bolts and screws
Pan head selftapping screws DIN 7981
Tapping screws, raised countersunk head with cross recess DIN 7983
Chipboard screws DIN 7505A
Self-locking nuts DIN 982
Code
mm Code
mmCode
mm Code
mm
37.050.01 2.9x10 20 37.051.01 2.9x13 20 - - - - - -37.050.02 3.5x13 18 37.051.02 3.5x16 18 37.054.02 3x15 20 - - -37.050.04 3.9x16 14 37.051.04 3.9x19 13 37.054.04 3.5x20 18 37.056.04 4 5
- - - - - - - - - 37.056.05 5 437.050.06 4.2x25 11 37.051.06 3.9x25 10 - - - 37.056.06 6 337.050.08 4.8x25 9 37.051.08 4.2x32 9 37.054.08 4x25 14 37.056.08 8 237.050.10 4.8x32 7 37.051.10 4.8x25 9 37.054.10 4.5x30 10 - - -37.050.12 5.5x25 5 - - - - - - - - -37.050.14 5.5x38 4 37.051.14 5.5x50 4 37.054.14 5x45 8 - - -37.050.16 6.3x25 4 37.051.16 6.3x50 3 37.054.16 6x40 6 - - -37.050.18 6.3x50 3 - - - - - - -
Self-locking nuts DIN 982 / Split pins DIN 94Screws and nuts96 www.OSCULATI.com
Slotted csk fkat head screws DIN 963 + nut DIN 934 + washer DIN 125
Hex head screws DIN 933 + nut DIN 934 + washer DIN 125
Split pins DIN 94
Code mm
Code mm
Code mm
37.052.01 3x20 8 - - - 37.055.01 1.5x25 2037.052.02 4x20 7 - - - 37.055.02 2x35 1537.052.04 4x40 5 - - - 37.055.04 3x40 737.052.06 5x20 5 37.053.06 5x20 5 37.055.06 4x50 437.052.08 5x50 3 37.053.08 5x40 4 - - -37.052.10 6x30 4 37.053.10 6x30 3 - - -37.052.12 6x60 2 37.053.12 6x60 2 - - -
- - - 37.053.14 8x60 2 - - -37.052.16 8x60 2 - - - - - -
37 - Screws and nuts
Screws and nuts 37
Example of stand with assorted packs
Bolts and screws in packs - Counter stand, only / Set including 291assorted packs + counter stand
Bolts and screwsCode Description37.100.99 Counter rack, only
37.100.00Set including 291 assorted packs + counter display
(7 packs for each type of screws 37.050.xx; 37.051.xx; 37.052.xx; 37.053.xx; 37.054.xx + 4 packs for each type of nuts and split pins 37.056.xx; 37.055.xx)
Boxes with assorted screwsProfessional packages for advanced users; fitted with various types of items; packaged in a sturdy, practical container, anti-shock and transparent cover to easily locate the items, fitted with safety slide closure; different range of diameters lengths of the most commonly used boating screws, nuts and bolts.
Compact box
37.300.01 Size: 175x145x32mm Total items: 540 Include: 220 self-tapping screws (DIN 7981) - 320 self-tapping screws (DIN 7982).
Screws Boxes with assorted screws
Compact box
37.300.02 Size: 175x145x32mm Total items: 600 Include: 90 self-tapping screws (DIN 7981) - 135 self-tapping screws (DIN 7982) - 50 hexagonalhead screws (DIN 933) - 50 countersunk screws (DIN 963) - 90 hexagon nuts(DIN 934) - 40 self-lockinghexagon nuts (DIN 982) - 85 flat washers (DIN 125) - 60 washers three times larger than the hole.
Screws Boxes with assorted screws
Compact box
37.300.03 Size: 175x145x32mm Total items: 390 Include: 46 hexagonal head screws (DIN 933) - 64 countersunk screws (DIN 963) - 90 hexagonnuts(DIN 934) - 40 self-locking hexagon nuts (DIN 982) - 90 flat washers (DIN 125) - 60 washers threetimes larger than the hole.
Screws Boxes with assorted screws
Medium box
37.300.04 Size: 240x195x42mm Total items: 850 Include: 150 self-tapping screws (DIN 7981) - 148 self-tapping screws (DIN 7982) - 94hexagonal head screws (DIN 933) - 97 countersunk screws (DIN 963) - 115 hexagonnuts(DIN 934) - 64 self-locking hexagon nuts (DIN 982) - 105 flat washers (DIN 125) -70 washers three times larger than the hole - 7 threaded rod slugs, 20cm long (DIN 975).
Screws Boxes with assorted screws
Large box37.300.05 Size: 340x260x57mm Total items: 2000 Include: 192 self-tapping screws (DIN 7981) - 200 self-tapping screws (DIN 7982) - 168 Fastar countersunk Philips screws - 16 bolt sleeves (DIN 571) - 138 hexagonal head screws(DIN 933) - 129 countersunk screws (DIN 963) - 124 cap screws (DIN 84) - 42 Allen screws (DIN 912)- 240 hexagon nuts(DIN 934) - 71 self-locking hexagon nuts (DIN 982) - 17 blind nuts (DIN 1587) - 20 wing nuts (DIN 315) - 215 flat washers (DIN 125) - 130 washers three times larger than the hole - 70 crown washers (DIN 6798) -80 grower washers (DIN 127) - 15 threaded rod slugs, 20cm long (DIN 975) - 48 pins (DIN 127) - 38 stainless steel studs - 30 various stainless steel items: fillets, tightening clamps, pin with rings, shackle opening tool.497Sailing with you, since 1958
Screws Boxes with assorted screws
43
37
- Scr
ews a
nd nu
tsScrews and nuts7
Stainless steel screwsStainless steel screws and nuts made of A2 (AISI 304) or A4 (AISI 316) . Sold in convenient carton packages. See detailed lists at the end of this catalogue.
Screws
Self tapping screw, cross head, round head, UNI 6954 DIN 7981 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-7981-02.9X010 2.9 x 10 200 13.00 A4-7981-03.9X038 3.9 x 38 50 11.65 A4-7981-04.8X025 4.8 x 25 50 12.05A4-7981-02.9X013 2.9 x 13 200 14.00 A4-7981-04.2X010 4.2 x 10 100 11.10 A4-7981-04.8X032 4.8 x 32 50 13.50A4-7981-02.9X019 2.9 x 19 200 17.80 A4-7981-04.2X016 4.2 x 16 100 12.90 A4-7981-04.8X038 4.8 x 38 50 16.25A4-7981-03.5X010 3.5 x 10 200 16.00 A4-7981-04.2X019 4.2 x 19 100 14.40 A4-7981-04.8X045 4.8 x 45 25 11.40A4-7981-03.5X013 3.5 x 13 200 16.60 A4-7981-04.2X022 4.2 x 22 100 15.30 A4-7981-04.8X050 4.8 x 50 25 12.35A4-7981-03.5X016 3.5 x 16 200 17.80 A4-7981-04.2X025 4.2 x 25 100 16.30 A4-7981-05.5X016 5.5 x 16 50 14.40A4-7981-03.5X019 3.5 x 19 100 10.30 A4-7981-04.2X032 4.2 x 32 50 11.20 A4-7981-05.5X032 5.5 x 32 25 11.40A4-7981-03.5X025 3.5 x 25 100 14.40 A4-7981-04.2X038 4.2 x 38 50 13.05 A4-7981-05.5X038 5.5 x 38 25 12.35A4-7981-03.5X032 3.5 x 32 100 15.90 A4-7981-04.2X045 4.2 x 45 50 16.25 A4-7981-05.5X050 5.5 x 50 25 17.70A4-7981-03.9X010 3.9 x 10 200 18.60 A4-7981-04.2X050 4.2 x 50 25 10.45 A4-7981-06.3X019 6.3 x 19 50 19.50A4-7981-03.9X016 3.9 x 16 100 11.80 A4-7981-04.8X013 4.8 x 13 100 16.80 A4-7981-06.3X025 6.3 x 25 25 12.35A4-7981-03.9X019 3.9 x 19 100 13.50 A4-7981-04.8X016 4.8 x 16 100 18.60 A4-7981-06.3X032 6.3 x 32 25 14.20A4-7981-03.9X025 3.9 x 25 100 15.30 A4-7981-04.8X019 4.8 x 19 50 10.75A4-7981-03.9X032 3.9 x 32 50 11.20 A4-7981-04.8X022 4.8 x 22 50 11.65
Self tapping screw cross head / countersunk, UNI 6955 DIN 7982 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-7982-02.9X010 2.9 x 10 200 13.00 A4-7982-03.9X032 3.9 x 32 50 11.20 A4-7982-04.8X025 4.8 x 25 50 12.05A4-7982-02.9X013 2.9 x 13 200 14.00 A4-7982-03.9X038 3.9 x 38 50 11.65 A4-7982-04.8X032 4.8 x 32 50 13.50A4-7982-02.9X019 2.9 x 19 200 17.80 A4-7982-04.2X010 4.2 x 10 100 11.10 A4-7982-04.8X038 4.8 x 38 50 16.25A4-7982-03.5X010 3.5 x 10 200 16.00 A4-7982-04.2X016 4.2 x 16 100 12.90 A4-7982-04.8X045 4.8 x 45 25 11.40A4-7982-03.5X013 3.5 x 13 200 16.60 A4-7982-04.2X019 4.2 x 19 100 14.40 A4-7982-04.8X050 4.8 x 50 25 12.35A4-7982-03.5X016 3.5 x 16 200 17.80 A4-7982-04.2X022 4.2 x 22 100 15.30 A4-7982-05.5X016 5.5 x 16 50 14.40A4-7982-03.5X019 3.5 x 19 100 10.30 A4-7982-04.2X025 4.2 x 25 100 16.30 A4-7982-05.5X022 5.5 x 22 50 17.20A4-7982-03.5X025 3.5 x 25 100 14.40 A4-7982-04.2X032 4.2 x 32 50 11.20 A4-7982-05.5X032 5.5 x 32 25 11.40A4-7982-03.5X032 3.5 x 32 100 15.90 A4-7982-04.2X038 4.2 x 38 50 13.05 A4-7982-05.5X038 5.5 x 38 25 12.35A4-7982-03.5X038 3.5 x 38 50 9.75 A4-7982-04.2X045 4.2 x 45 50 16.25 A4-7982-05.5X050 5.5 x 50 25 17.70A4-7982-03.9X010 3.9 x 10 200 18.60 A4-7982-04.2X050 4.2 x 50 25 10.45 A4-7982-06.3X019 6.3 x 19 50 19.50A4-7982-03.9X016 3.9 x 16 100 11.80 A4-7982-04.8X013 4.8 x 13 100 16.80 A4-7982-06.3X025 6.3 x 25 25 12.35A4-7982-03.9X019 3.9 x 19 100 13.50 A4-7982-04.8X016 4.8 x 16 100 18.60 A4-7982-06.3X032 6.3 x 32 25 14.20A4-7982-03.9X022 3.9 x 22 100 15.00 A4-7982-04.8X019 4.8 x 19 50 10.75 A4-7982-06.3X045 6.3 x 45 25 19.32A4-7982-03.9X025 3.9 x 25 100 15.30 A4-7982-04.8X022 4.8 x 22 50 11.65 A4-7982-06.3X060 6.3 x 60 10 9.96
Machine screw - Cheese head with slot UNI 6107 DIN 84 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-84-03X012 3 x 12 200 17.80 A4-84-04X030 4 x 30 50 12.05 A4-84-06X020 6 x 20 50 18.05A4-84-03X016 3 x 16 200 19.60 A4-84-04X035 4 x 35 50 13.05 A4-84-06X030 6 x 30 50 23.70A4-84-03X020 3 x 20 100 12.00 A4-84-04X040 4 x 40 50 15.80 A4-84-06X040 6 x 40 25 13.95A4-84-03X025 3 x 25 100 13.80 A4-84-04X050 4 x 50 25 12.35 A4-84-06X050 6 x 50 10 9.66A4-84-03X030 3 x 30 100 15.30 A4-84-05X020 5 x 20 50 14.90 A4-84-06X060 6 x 60 10 11.63A4-84-03X035 3 x 35 50 11.20 A4-84-05X030 5 x 30 50 18.65 A4-84-08X030 8 x 30 10 12.54A4-84-04X016 4 x 16 100 16.30 A4-84-05X040 5 x 40 25 12.35 A4-84-08X040 8 x 40 10 17.10A4-84-04X020 4 x 20 100 17.80 A4-84-05X050 5 x 50 25 14.87 A4-84-08X050 8 x 50 10 20.35A4-84-04X025 4 x 25 50 10.75 A4-84-05X060 5 x 60 25 20.00 A4-84-08X060 8 x 60 10 26.4998 www.OSCULATI.com
37 - Screws and nuts
Screws and nuts 37
Threaded hexagon setscrew UNI 5739 DIN 933 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-933-04X012 4 x 12 100 17.30 A4-933-06X060 6 x 60 25 16.00 A4-933-10X050 10 x 50 10 12.36A4-933-04X020 4 x 20 100 20.50 A4-933-06X070 6 x 70 10 9.58 A4-933-10X060 10 x 60 10 14.69A4-933-04X030 4 x 30 50 13.50 A4-933-06X080 6 x 80 10 10.88 A4-933-10X080 10 x 80 5 11.06A4-933-04X040 4 x 40 50 18.05 A4-933-06X100 6 x 100 10 15.15 A4-933-10X100 10 x 100 5 15.38A4-933-05X020 5 x 20 50 10.75 A4-933-08X030 8 x 30 25 13.25 A4-933-10X120 10 x 120 5 22.40A4-933-05X030 5 x 30 50 13.05 A4-933-08X040 8 x 40 25 15.77 A4-933-12X050 12 x 50 10 16.74A4-933-05X040 5 x 40 50 15.80 A4-933-08X050 8 x 50 10 8.28 A4-933-12X060 12 x 60 10 20.45A4-933-05X050 5 x 50 25 12.12 A4-933-08X060 8 x 60 10 9.20 A4-933-12X080 12 x 80 5 15.25A4-933-06X020 6 x 20 50 11.65 A4-933-08X070 8 x 70 10 12.18 A4-933-12X100 12 x 100 5 19.34A4-933-06X030 6 x 30 50 14.90 A4-933-08X080 8 x 80 10 13.95 A4-933-12X120 12 x 120 5 28.45A4-933-06X040 6 x 40 25 9.75 A4-933-08X100 8 x 100 5 11.15A4-933-06X050 6 x 50 25 11.20 A4-933-10X040 10 x 40 10 10.33
Machine screw, slot head - countersunk UNI 6109 DIN 963Code
mmPrice per
package Code
mmPrice per
package Code
mmPrice per
package
A4-963-03X012 3 x 12 200 17.80 A4-963-05X020 5 x 20 50 14.90 A4-963-06X080 6 x 80 10 23.24A4-963-03X016 3 x 16 200 19.60 A4-963-05X030 5 x 30 50 18.65 A4-963-06X100 6 x 100 5 23.47A4-963-03X020 3 x 20 100 12.00 A4-963-05X040 5 x 40 25 12.35 A4-963-08X030 8 x 30 10 12.54A4-963-03X025 3 x 25 100 13.80 A4-963-05X050 5 x 50 25 5.87 A4-963-08X040 8 x 40 10 17.10A4-963-03X030 3 x 30 100 15.30 A4-963-05X060 5 x 60 25 20.00 A4-963-08X050 8 x 50 10 20.35A4-963-03X040 3 x 40 50 14.90 A4-963-06X020 6 x 20 50 18.05 A4-963-08X060 8 x 60 10 26.49A4-963-04X016 4 x 16 100 16.30 A4-963-06X030 6 x 30 50 23.70 A4-963-08X070 8 x 70 5 16.08A4-963-04X020 4 x 20 100 17.80 A4-963-06X040 6 x 40 25 13.95 A4-963-08X080 8 x 80 5 21.34A4-963-04X030 4 x 30 50 12.05 A4-963-06X050 6 x 50 25 24.15 A4-963-08X100 8 x 100 5 32.12A4-963-04X040 4 x 40 50 15.80 A4-963-06X060 6 x 60 10 11.63A4-963-04X050 4 x 50 25 12.35 A4-963-06X070 6 x 70 10 17.48
Countersunk socket screw, UNI 5933 DIN 7991 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-7991-03X012 3 x 12 50 8.90 A4-7991-04X040 4 x 40 25 9.52 A4-7991-06X030 6 x 30 25 9.02A4-7991-03X020 3 x 20 50 10.25 A4-7991-04X050 4 x 50 25 12.57 A4-7991-06X040 6 x 40 25 11.62A4-7991-03X030 3 x 30 50 13.95 A4-7991-05X020 5 x 20 50 11.20 A4-7991-06X060 6 x 60 10 7.90A4-7991-04X016 4 x 16 50 8.90 A4-7991-05X040 5 x 40 25 10.20 A4-7991-06X070 6 x 70 10 10.79A4-7991-04X020 4 x 20 50 10.25 A4-7991-05X050 5 x 50 25 14.40 A4-7991-06X100 6 x 100 5 10.22A4-7991-04X030 4 x 30 50 13.95 A4-7991-06X020 6 x 20 50 13.05
Hexagon nut DIN 934 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-934-03 3 200 10.20 A4-934-06 6 200 18.60 A4-934-12 12 25 15.57A4-934-04 4 200 11.00 A4-934-08 8 100 18.10A4-934-05 5 200 13.00 A4-934-10 10 25 10.95
Self-locking hexagon nut DIN 982 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-982-04 4 (DIN 985 low type) 50 20.40 A4-982-06 6 25 9.32 A4-982-10 10 10 12.84A4-982-05 5 25 7.90 A4-982-08 8 10 5.85 A4-982-12 12 5 9.99
Domed cap hexagon nut UNI 5721 DIN 1587 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-1587-04 4 25 20.95 A4-1587-06 6 10 8.09 A4-1587-10 10 5 13.99A4-1587-05 5 25 18.60 A4-1587-08 8 10 16.28 A4-1587-12 12 5 19.84
Washer UNI 6592 DIN 125 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-125-03 3 200 5.60 A4-125-06 6 200 14.80 A4-125-12 12 50 19.50A4-125-04 4 200 6.60 A4-125-08 8 100 12.00A4-125-05 5 200 8.60 A4-125-10 10 50 12.05499Sailing with you, since 1958
53
37
- Scr
ews a
nd nu
tsScrews and nuts7
Washer x 3 nominal diameter Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-9021A-03X009 3 x 9 200 7.60 A4-9021A-06X018 6 x 18 100 15.30 A4-9021A-12X036 12 x 36 10 10.23A4-9021A-04X012 4 x 12 200 13.00 A4-9021A-08X024 8 x 24 50 17.65A4-9021A-05X015 5 x 15 200 19.60 A4-9021A-10X030 10 x 30 25 13.72
Serrated lock washer DIN 6798 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-6798-04 4 200 9.20 A4-6798-06 6 200 16.60 A4-6798-10 10 100 24.10A4-6798-05 5 200 13.00 A4-6798-08 8 200 28.80 A4-6798-12 12 50 16.75
Grower washers UNI 1751 DIN 127 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A4-127-03 3 200 6.60 A4-127-06 6 200 14.80 A4-127-12 12 50 14.40A4-127-04 4 200 7.60 A4-127-08 8 200 25.80A4-127-05 5 200 9.20 A4-127-10 10 100 17.80
Stainless steel nuts, bolts and screws: A2-AISI 304Screws are sold in practical cardboard boxes.
Self tapping screw cross head - oval, UNI 6954 DIN 7981 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-7981-02.9X010 2.9 x 10 200 7.4 A2-7981-03.9X038 3.9 x 38 100 12.4 A2-7981-04.8X032 4.8 x 32 100 14.3A2-7981-02.9X013 2.9 x 13 200 8 A2-7981-04.2X010 4.2 x 10 200 11.6 A2-7981-04.8X038 4.8 x 38 50 9A2-7981-02.9X019 2.9 x 19 200 9.6 A2-7981-04.2X013 4.2 x 13 200 12.4 A2-7981-04.8X045 4.8 x 45 50 11.85A2-7981-03.5X010 3.5 x 10 200 8.6 A2-7981-04.2X016 4.2 x 16 200 13.8 A2-7981-04.8X050 4.8 x 50 50 13.05A2-7981-03.5X013 3.5 x 13 200 9.4 A2-7981-04.2X019 4.2 x 19 100 8.1 A2-7981-05.5X016 5.5 x 16 50 8.1A2-7981-03.5X016 3.5 x 16 200 9.8 A2-7981-04.2X022 4.2 x 22 100 8.7 A2-7981-05.5X022 5.5 x 22 50 9.65A2-7981-03.5X019 3.5 x 19 200 10.8 A2-7981-04.2X025 4.2 x 25 100 9.2 A2-7981-05.5X032 5.5 x 32 50 12.05A2-7981-03.5X025 3.5 x 25 100 8.1 A2-7981-04.2X032 4.2 x 32 100 11.7 A2-7981-05.5X038 5.5 x 38 50 13.1A2-7981-03.5X032 3.5 x 32 100 9 A2-7981-04.2X038 4.2 x 38 100 13.9 A2-7981-05.5X050 5.5 x 50 25 9.95A2-7981-03.5X038 3.5 x 38 100 10.4 A2-7981-04.2X045 4.2 x 45 100 17.6 A2-7981-06.3X019 6.3 x 19 50 11A2-7981-03.9X010 3.9 x 10 200 10.6 A2-7981-04.2X050 4.2 x 50 50 10.95 A2-7981-06.3X025 6.3 x 25 50 13.05A2-7981-03.9X016 3.9 x 16 200 12.2 A2-7981-04.8X013 4.8 x 13 100 9.6 A2-7981-06.3X032 6.3 x 32 25 8A2-7981-03.9X019 3.9 x 19 200 14.4 A2-7981-04.8X016 4.8 x 16 100 10.6 A2-7981-06.3X045 6.3 x 45 25 10.82A2-7981-03.9X022 3.9 x 22 100 8.4 A2-7981-04.8X019 4.8 x 19 100 11.3 A2-7981-06.3X060 6.3 x 60 25 13.2A2-7981-03.9X025 3.9 x 25 100 8.8 A2-7981-04.8X022 4.8 x 22 100 12.4A2-7981-03.9X032 3.9 x 32 100 11.7 A2-7981-04.8X025 4.8 x 25 100 12.8
Self tapping screw cross head, countersunk, UNI 6955 DIN 7982 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-7982-02.9X010 2.9 x 10 200 7.40 A2-7982-03.9X038 3.9 x 38 100 12.40 A2-7982-04.8X032 4.8 x 32 100 14.30A2-7982-02.9X013 2.9 x 13 200 8.00 A2-7982-04.2X010 4.2 x 10 200 11.60 A2-7982-04.8X038 4.8 x 38 50 9.00A2-7982-02.9X019 2.9 x 19 200 9.60 A2-7982-04.2X013 4.2 x 13 200 12.40 A2-7982-04.8X045 4.8 x 45 50 11.85A2-7982-03.5X010 3.5 x 10 200 8.60 A2-7982-04.2X016 4.2 x 16 200 13.80 A2-7982-04.8X050 4.8 x 50 50 13.05A2-7982-03.5X013 3.5 x 13 200 9.40 A2-7982-04.2X019 4.2 x 19 100 8.10 A2-7982-05.5X016 5.5 x 16 50 8.10A2-7982-03.5X016 3.5 x 16 200 9.80 A2-7982-04.2X022 4.2 x 22 100 8.70 A2-7982-05.5X022 5.5 x 22 50 9.65A2-7982-03.5X019 3.5 x 19 200 10.80 A2-7982-04.2X025 4.2 x 25 100 9.20 A2-7982-05.5X032 5.5 x 32 50 12.05A2-7982-03.5X025 3.5 x 25 100 8.10 A2-7982-04.2X032 4.2 x 32 100 11.70 A2-7982-05.5X038 5.5 x 38 50 13.10A2-7982-03.5X032 3.5 x 32 100 9.00 A2-7982-04.2X038 4.2 x 38 100 13.90 A2-7982-05.5X050 5.5 x 50 25 9.95A2-7982-03.5X038 3.5 x 38 100 10.40 A2-7982-04.2X045 4.2 x 45 100 17.60 A2-7982-06.3X019 6.3 x 19 50 11.00A2-7982-03.9X010 3.9 x 10 200 10.60 A2-7982-04.2X050 4.2 x 50 50 10.95 A2-7982-06.3X025 6.3 x 25 50 13.05A2-7982-03.9X016 3.9 x 16 200 12.20 A2-7982-04.8X013 4.8 x 13 100 9.60 A2-7982-06.3X032 6.3 x 32 25 8.00A2-7982-03.9X019 3.9 x 19 200 14.40 A2-7982-04.8X016 4.8 x 16 100 10.60 A2-7982-06.3X045 6.3 x 45 25 10.82A2-7982-03.9X022 3.9 x 22 100 8.40 A2-7982-04.8X019 4.8 x 19 100 11.30 A2-7982-06.3X060 6.3 x 60 25 13.20A2-7982-03.9X025 3.9 x 25 100 8.80 A2-7982-04.8X022 4.8 x 22 100 12.40A2-7982-03.9X032 3.9 x 32 100 11.70 A2-7982-04.8X025 4.8 x 25 100 12.8000 www.OSCULATI.com
37 - Screws and nuts
Screws and nuts 37
Flat countersunk Phillips-head screws for chipboard panels, wood andplastic - DIN 7505A
Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-7505A-03X015 3 x 15 100 6.30 A2-7505A-04X035 4 x 35 100 12.30 A2-7505A-05X050 5 x 50 50 14.40A2-7505A-03X020 3 x 20 100 6.50 A2-7505A-04X040 4 x 40 100 13.70 A2-7505A-05X060 5 x 60 50 17.10A2-7505A-03X030 3 x 30 100 10.50 A2-7505A-04X050 4 x 50 100 19.50 A2-7505A-05X070 5 x 70 25 11.05
A2-7505A-03.5X015 3.5 x 15 100 7.80 A2-7505A-04.5X025 4.5 x 25 100 11.90 A2-7505A-05X080 5 x 80 25 13.30A2-7505A-03.5X020 3.5 x 20 100 8.30 A2-7505A-04.5X030 4.5 x 30 100 13.70 A2-7505A-06X025 6 x 25 50 12.40A2-7505A-03.5X025 3.5 x 25 100 9.60 A2-7505A-04.5X035 4.5 x 35 100 15.90 A2-7505A-06X030 6 x 30 50 13.75A2-7505A-03.5X030 3.5 x 30 100 11.00 A2-7505A-04.5X040 4.5 x 40 100 18.60 A2-7505A-06X035 6 x 35 50 15.55A2-7505A-03.5X040 3.5 x 40 100 15.40 A2-7505A-04.5X050 4.5 x 50 50 13.30 A2-7505A-06X040 6 x 40 50 17.30A2-7505A-04X015 4 x 15 100 8.70 A2-7505A-05X025 5 x 25 100 15.40 A2-7505A-06X050 6 x 50 50 21.15A2-7505A-04X020 4 x 20 100 9.20 A2-7505A-05X030 5 x 30 50 9.25 A2-7505A-06X060 6 x 60 25 13.07A2-7505A-04X025 4 x 25 100 10.10 A2-7505A-05X035 5 x 35 50 9.95 A2-7505A-06X070 6 x 70 25 15.97A2-7505A-04X030 4 x 30 100 11.00 A2-7505A-05X040 5 x 40 50 10.85 A2-7505A-06X080 6 x 80 25 18.87
Self tapping screw cross head - oval UNI 6956 DIN 7983 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-7983-02.9X010 2.9 x 10 200 7.40 A2-7983-03.9X038 3.9 x 38 100 12.40 A2-7983-04.8X032 4.8 x 32 100 14.30A2-7983-02.9X013 2.9 x 13 200 8.00 A2-7983-04.2X010 4.2 x 10 200 11.60 A2-7983-04.8X038 4.8 x 38 50 9.00A2-7983-02.9X019 2.9 x 19 200 9.60 A2-7983-04.2X013 4.2 x 13 200 12.40 A2-7983-04.8X045 4.8 x 45 50 11.85A2-7983-03.5X010 3.5 x 10 200 8.60 A2-7983-04.2X016 4.2 x 16 200 13.80 A2-7983-04.8X050 4.8 x 50 50 13.05A2-7983-03.5X013 3.5 x 13 200 9.40 A2-7983-04.2X019 4.2 x 19 100 8.10 A2-7983-05.5X016 5.5 x 16 50 8.10A2-7983-03.5X016 3.5 x 16 200 9.80 A2-7983-04.2X022 4.2 x 22 100 8.70 A2-7983-05.5X022 5.5 x 22 50 9.65A2-7983-03.5X019 3.5 x 19 200 10.80 A2-7983-04.2X025 4.2 x 25 100 9.20 A2-7983-05.5X032 5.5 x 32 50 12.05A2-7983-03.5X025 3.5 x 25 100 8.10 A2-7983-04.2X032 4.2 x 32 100 11.70 A2-7983-05.5X038 5.5 x 38 50 13.10A2-7983-03.5X032 3.5 x 32 100 9.00 A2-7983-04.2X038 4.2 x 38 100 13.90 A2-7983-05.5X050 5.5 x 50 25 9.95A2-7983-03.5X038 3.5 x 38 100 10.40 A2-7983-04.2X045 4.2 x 45 100 17.60 A2-7983-06.3X019 6.3 x 19 50 11.00A2-7983-03.9X010 3.9 x 10 200 10.60 A2-7983-04.2X050 4.2 x 50 50 10.95 A2-7983-06.3X025 6.3 x 25 50 13.05A2-7983-03.9X016 3.9 x 16 200 12.20 A2-7983-04.8X013 4.8 x 13 100 9.60 A2-7983-06.3X032 6.3 x 32 25 8.00A2-7983-03.9X019 3.9 x 19 200 14.40 A2-7983-04.8X016 4.8 x 16 100 10.60 A2-7983-06.3X045 6.3 x 45 25 10.82A2-7983-03.9X022 3.9 x 22 100 8.40 A2-7983-04.8X019 4.8 x 19 100 11.30 A2-7983-06.3X060 6.3 x 60 25 13.20A2-7983-03.9X025 3.9 x 25 100 8.80 A2-7983-04.8X022 4.8 x 22 100 12.40A2-7983-03.9X032 3.9 x 32 100 11.70 A2-7983-04.8X025 4.8 x 25 100 12.80
Hexagon head, wood screw UNI 704 DIN 571 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-571-06X030 6 x 30 25 10.15 A2-571-08X050 8 x 50 10 8.72 A2-571-10X060 10 x 60 10 17.26A2-571-06X040 6 x 40 25 12.17 A2-571-08X060 8 x 60 10 9.94 A2-571-10X070 10 x 70 10 18.48A2-571-06X050 6 x 50 25 14.20 A2-571-08X070 8 x 70 10 11.16 A2-571-10X080 10 x 80 10 20.68A2-571-06X060 6 x 60 25 15.72 A2-571-08X080 8 x 80 10 12.58 A2-571-10X100 10x1000 10 24.75A2-571-06X070 6 x 70 10 7.70 A2-571-08X100 8 x 100 10 15.63A2-571-08X040 8 x 40 10 7.90 A2-571-10X050 10 x 50 10 15.63
Threaded hexagon setscrew UNI 5739 DIN 933 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-933-04X012 4 x 12 100 14.3 A2-933-06X045 6 x 45 50 16.2 A2-933-08X080 8 x 80 25 29.37A2-933-04X020 4 x 20 100 17.1 A2-933-06X050 6 x 50 50 17.45 A2-933-08X100 8 x 100 10 17.89A2-933-04X030 4 x 30 100 21.5 A2-933-06X055 6 x 55 25 12.65 A2-933-08X120 8 x 120 10 24.04A2-933-04X040 4 x 40 50 15.1 A2-933-06X060 6 x 60 25 13.35 A2-933-10X040 10 x 40 25 20.37A2-933-05X016 5 x 16 100 14.6 A2-933-06X065 6 x 65 25 17 A2-933-10X050 10 x 50 25 26.07A2-933-05X020 5 x 20 100 16.2 A2-933-06X070 6 x 70 25 18.65 A2-933-10X060 10 x 60 25 31.1A2-933-05X030 5 x 30 100 20.1 A2-933-06X075 6 x 75 25 20.82 A2-933-10X080 10 x 80 10 17.73A2-933-05X040 5 x 40 50 12.75 A2-933-06X080 6 x 80 25 21.47 A2-933-10X100 10 x 100 10 26.06A2-933-05X050 5 x 50 50 18.9 A2-933-06X100 6 x 100 10 12.77 A2-933-10X120 10 x 120 10 37.84A2-933-06X016 6 x 16 100 16.3 A2-933-08X025 8 x 25 25 9.85 A2-933-12X045 12 x 45 25 33.92A2-933-06X020 6 x 20 100 17.8 A2-933-08X030 8 x 30 25 10.97 A2-933-12X060 12 x 60 10 17.23A2-933-06X025 6 x 25 100 20.3 A2-933-08X040 8 x 40 25 13.15 A2-933-12X080 12 x 80 10 25.76A2-933-06X030 6 x 30 50 12.1 A2-933-08X050 8 x 50 25 15.92 A2-933-12X100 12 x 100 10 32.72A2-933-06X035 6 x 35 50 13.55 A2-933-08X060 8 x 60 25 18 A2-933-12X120 12 x 120 5 24.04A2-933-06X040 6 x 40 50 14.9 A2-933-08X070 8 x 70 25 25.8 A2-933-12X150 12 x 150 parz filet 5 29.91501Sailing with you, since 1958
53
37
- Scr
ews a
nd nu
tsScrews and nuts7
Convex countersunk head machine screw cross recedded UNI 7689 DIN 966 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-966-03X012 3 x 12 200 9.2 A2-966-05X030 5 x 30 50 9.65 A2-966-06X045 6 x 45 25 9.8A2-966-03X016 3 x 16 200 10 A2-966-05X035 5 x 35 50 11.15 A2-966-06X050 6 x 50 25 12.45A2-966-03X020 3 x 20 200 11 A2-966-05X040 5 x 40 50 13.35 A2-966-06X060 6 x 60 25 16.05A2-966-03X030 3 x 30 200 14.2 A2-966-05X045 5 x 45 25 8.85 A2-966-08X030 8 x 30 25 17.1A2-966-04X016 4 x 16 100 8.1 A2-966-05X050 5 x 50 25 10.52 A2-966-08X040 8 x 40 25 25.02A2-966-04X020 4 x 20 100 8.8 A2-966-06X020 6 x 20 50 10.25 A2-966-08X050 8 x 50 25 29.67A2-966-04X030 4 x 30 100 10.8 A2-966-06X025 6 x 25 50 11.35 A2-966-08X060 8 x 60 10 14.73A2-966-04X040 4 x 40 50 9.1 A2-966-06X030 6 x 30 50 12.45 A2-966-08X070 8 x 70 10 17.91A2-966-05X020 5 x 20 100 14.8 A2-966-06X035 6 x 35 50 13.5 A2-966-08X080 8 x 80 10 24.88A2-966-05X025 5 x 25 50 8.8 A2-966-06X040 6 x 40 25 8.22
Machine screw cross head - countersunk, UNI 7688 DIN 965 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-965-03X012 3 x 12 200 9.20 A2-965-05X025 5 x 25 50 8.80 A2-965-06X050 6 x 50 25 12.45A2-965-03X016 3 x 16 200 10.00 A2-965-05X030 5 x 30 50 9.65 A2-965-06X060 6 x 60 25 16.05A2-965-03X020 3 x 20 200 11.00 A2-965-05X035 5 x 35 50 11.15 A2-965-08X020 8 x 20 25 12.07A2-965-03X025 3 x 25 200 12.80 A2-965-05X040 5 x 40 50 13.35 A2-965-08X025 8 x 25 25 14.22A2-965-03X030 3 x 30 100 7.60 A2-965-05X045 5 x 45 25 8.85 A2-965-08X030 8 x 30 25 17.10A2-965-04X016 4 x 16 100 8.10 A2-965-05X050 5 x 50 25 10.52 A2-965-08X035 8 x 35 25 23.60A2-965-04X020 4 x 20 100 8.80 A2-965-06X020 6 x 20 50 10.25 A2-965-08X040 8 x 40 25 25.02A2-965-04X025 4 x 25 100 9.80 A2-965-06X025 6 x 25 50 11.35 A2-965-08X045 8 x 45 25 27.52A2-965-04X030 4 x 30 100 10.80 A2-965-06X030 6 x 30 50 12.45 A2-965-08X050 8 x 50 25 29.67A2-965-04X035 4 x 35 50 8.50 A2-965-06X035 6 x 35 50 13.50 A2-965-08X060 8 x 60 10 14.73A2-965-04X040 4 x 40 50 9.10 A2-965-06X040 6 x 40 25 8.22 A2-965-08X070 8 x 70 10 17.91A2-965-05X020 5 x 20 100 14.80 A2-965-06X045 6 x 45 25 9.80 A2-965-08X080 8 x 80 10 24.88
Machine screw, slot head - countersunk UNI 6109 DIN 963 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-963-03X012 3 x 12 200 9.80 A2-963-05X025 5 x 25 100 17.30 A2-963-06X060 6 x 60 25 14.80A2-963-03X016 3 x 16 200 10.60 A2-963-05X030 5 x 30 100 19.00 A2-963-06X070 6 x 70 25 23.92A2-963-03X020 3 x 20 200 12.00 A2-963-05X035 5 x 35 50 11.55 A2-963-06X080 6 x 80 10 12.04A2-963-03X025 3 x 25 200 14.00 A2-963-05X040 5 x 40 50 12.45 A2-963-06X100 6 x 100 10 25.50A2-963-03X030 3 x 30 100 8.40 A2-963-05X045 5 x 45 50 13.90 A2-963-06X120 6 x 120 5 29.34A2-963-03X040 3 x 40 50 7.90 A2-963-05X050 5 x 50 25 7.97 A2-963-06X150 6 x 150 5 42.31A2-963-04X016 4 x 16 100 8.80 A2-963-05X060 5 x 60 25 10.65 A2-963-08X030 8 x 30 25 15.95A2-963-04X020 4 x 20 100 9.60 A2-963-06X020 6 x 20 100 18.50 A2-963-08X040 8 x 40 25 23.40A2-963-04X025 4 x 25 100 10.90 A2-963-06X025 6 x 25 50 10.75 A2-963-08X050 8 x 50 25 27.72A2-963-04X030 4 x 30 100 12.20 A2-963-06X030 6 x 30 50 11.85 A2-963-08X060 8 x 60 10 13.75A2-963-04X035 4 x 35 50 7.05 A2-963-06X035 6 x 35 50 12.90 A2-963-08X070 8 x 70 10 16.70A2-963-04X040 4 x 40 50 8.40 A2-963-06X040 6 x 40 50 14.20 A2-963-08X080 8 x 80 10 23.24A2-963-04X050 4 x 50 25 6.65 A2-963-06X045 6 x 45 25 9.80 A2-963-08X100 8 x 100 5 17.30A2-963-05X020 5 x 20 100 15.10 A2-963-06X050 6 x 50 25 12.17 A2-963-08X120 8 x 120 5 40.68
Machine screw - Cheese head with slot UNI 6107 DIN 84 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-84-03X012 3 x 12 200 9.8 A2-84-05X025 5 x 25 100 17.3 A2-84-06X040 6 x 40 50 14.2A2-84-03X016 3 x 16 200 10.6 A2-84-05X030 5 x 30 50 9.9 A2-84-06X045 6 x 45 25 9.8A2-84-03X020 3 x 20 200 12 A2-84-05X035 5 x 35 50 11.55 A2-84-06X050 6 x 50 25 12.17A2-84-03X030 3 x 30 100 8.4 A2-84-05X040 5 x 40 50 12.45 A2-84-06X060 6 x 60 25 14.8A2-84-03X040 3 x 40 50 7.9 A2-84-05X045 5 x 45 50 13.9 A2-84-06X070 6 x 70 25 23.92A2-84-04X016 4 x 16 200 16.4 A2-84-05X050 5 x 50 25 7.97 A2-84-06X080 6 x 80 10 12.04A2-84-04X020 4 x 20 100 9.6 A2-84-05X060 5 x 60 25 10.65 A2-84-08X030 8 x 30 25 15.95A2-84-04X030 4 x 30 100 12.2 A2-84-06X020 6 x 20 50 9.65 A2-84-08X040 8 x 40 25 23.4A2-84-04X040 4 x 40 50 8.4 A2-84-06X025 6 x 25 50 10.75 A2-84-08X050 8 x 50 25 27.72A2-84-04X050 4 x 50 50 12.3 A2-84-06X030 6 x 30 50 11.85 A2-84-08X060 8 x 60 10 13.75A2-84-05X020 5 x 20 100 15.1 A2-84-06X035 6 x 35 50 12.9 A2-84-08X080 8 x 80 10 23.2402 www.OSCULATI.com
37 - Screws and nuts
Screws and nuts 37
Machine screw - Large cheese head - cross head - round UNI 7687 DIN 7985 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-7985-04X020 4 x 20 100 8.80 A2-7985-05X045 5 x 45 25 8.85 A2-7985-08X030 8 x 30 25 17.10A2-7985-04X025 4 x 25 100 9.80 A2-7985-05X050 5 x 50 25 10.52 A2-7985-08X035 8 x 35 25 23.60A2-7985-04X030 4 x 30 100 10.80 A2-7985-06X020 6 x 20 50 10.25 A2-7985-08X040 8 x 40 25 25.02A2-7985-04X035 4 x 35 50 8.50 A2-7985-06X025 6 x 25 50 11.35 A2-7985-08X045 8 x 45 25 27.52A2-7985-04X040 4 x 40 50 9.10 A2-7985-06X030 6 x 30 50 12.45 A2-7985-08X050 8 x 50 25 29.67A2-7985-05X020 5 x 20 50 7.80 A2-7985-06X035 6 x 35 50 13.50 A2-7985-08X060 8 x 60 10 14.73A2-7985-05X025 5 x 25 50 8.80 A2-7985-06X040 6 x 40 25 8.22 A2-7985-08X070 8 x 70 10 17.91A2-7985-05X030 5 x 30 50 9.65 A2-7985-06X045 6 x 45 25 9.80 A2-7985-08X080 8 x 80 10 24.88A2-7985-05X035 5 x 35 50 11.15 A2-7985-06X050 6 x 50 25 12.45A2-7985-05X040 5 x 40 50 13.35 A2-7985-06X060 6 x 60 25 16.05
Socket head cap screw UNI 5931 DIN 912 Bolts and screws
Code mm
Price per package
Code mm
Price per package
Code mm
Price per package
A2-912-04X010 4 x 10 50 7.80 A2-912-05X040 5 x 40 50 16.15 A2-912-08X016 8 x 16 25 10.60A2-912-04X016 4 x 16 50 8.05 A2-912-05X050 5 x 50 25 12.10 A2-912-08X020 8 x 20 25 11.97A2-912-04X020 4 x 20 50 8.20 A2-912-05X060 5 x 60 25 15.82 A2-912-08X030 8 x 30 25 13.42A2-912-04X030 4 x 30 50 10.60 A2-912-06X016 6 x 16 50 10.45 A2-912-08X040 8 x 40 25 16.82A2-912-04X040 4 x 40 50 13.10 A2-912-06X020 6 x 20 50 12.00 A2-912-08X050 8 x 50 25 21.17A2-912-05X010 5 x 10 50 8.30 A2-912-06X030 6 x 30