24
Orient paper mills Amlai,shahdol(mp) Major vocational training Project report on 1.chipper house 2.pulp mill 3.Tissue paper plant

Orient Paper Mills

Embed Size (px)

Citation preview

Page 1: Orient Paper Mills

Orient paper millsAmlai,shahdol(mp)

Major vocational training

Project report on

1.chipper house 2.pulp mill3.Tissue paper plant

Submitted to: submitted by:Miss kriti sexena Harsh mohan pathak

(G.E.C.)

Page 2: Orient Paper Mills

Acknowledgement

The success of any project is never limited to the individual undertaking the project.The completion of the report which is presented here in was possible by the splendid cooperation of many individuals .I express my deep sense of gratitude and thanx to senior president Mr. VK Verma and vice president of human resourses of development Mr DN Swain and all others.

I take this oppertiunity to extend my sensior thanx to all staffs and worker of orient paper mill for rendering their knowledge and help while the whole period of training.

Page 3: Orient Paper Mills

Introduction

Orient Paper Mills is one of India's major players in Paper with a wide range of writing, printing, industrial and speciality papers.

Fully integrated with facilities for production of high strength pulp combined with reafforestation, high speed paper machines and independent power generation, Orient Paper Mills is in total control right from raw materials to the production of a variety of superior papers and boards.

The Orient Paper Mills  plants at AMLAI, Madhya Pradesh have manufacturing facilities to produce a variety of grades and types of papers. Judicious deployment of new technology, abiding commitment to total quality management systems and ingenuity in research and product development have enabled Orient Paper Mills to carve out an important niche not only in the Indian market but in several other countries as well.

The Company has recently set up state-of-the-art facilities to produce a spectrum of Soft Tissue Paper of world class quality. To perpetuate progress, the Paper Division of Orient Paper Mills continually improving its people, products and processes as it marches ahead in its quest for even higher standards of excellence.

Page 4: Orient Paper Mills

Plant layout

Page 5: Orient Paper Mills

Chipper house

Drum chipper is the production of wood products of special equipment, the products are widely used in particle board plantsDrum type wood chipper,wood shredder,wood logs chipping machineDrum chipper is the production of wood products of special equipment, the products are widely used in particle board plants, medium and high-density fibreboard plant, Wo straw plant, bio-power plants, wood chips and other plants and manufacturers of industrial production in the preparation section before the preferred equipment.The product mix of advanced, cutting-chip high-quality materials, raw materials adaptive light, easy operation and maintenance. Cutting path of the main raw material is wood, timber harvesting, processing residues (such as, branches, slab, slab, core logs, veneer waste, etc.), can also be used to cutting non-wood raw materials (such as sugar cane, reed, bamboo, etc.).Machine from the body, knife-roller, upper and lower feed roller, conveyor, hydraulic system components.The body using high-strength steel welded together, the whole machine is supported by the foundation.Knife roller is installed on two or three, four Flying with the Flying Bolt specializes in manufacturing, through the pressure block, the Flying roller on a fixed knife. Cutting of raw materials according to different thickness, the feed roller assembly can make use of the

Page 6: Orient Paper Mills

hydraulic system in a certain range of plus or minus. Cutting down the qualified film material falling through the mesh holes, from the bottom of discharge, the chip is expected to be carried out in the cutting machine.Hydraulic systems: for by the oil pump to the fuel tank, you can start to build enclosures for easy blade replacement; can be looked up in the maintenance of the feed roller assembly to facilitate adjustment of Flying, at the end of the gap between the knife and removable comb plate.

Technical specifications:

ModelBX215BX216BX218BX2113Imported materials and dimensions mm160*400230*500300*680450*700Flying the number of2222Knife roll speed592590650500Maximum diameter of the processing of raw materials mm160230

Page 7: Orient Paper Mills

300450Chip size mm30303038Production capacity3-47-812-1515-30Power of main motor kw4555110200-250Feed roller motor power kw2.2-33-44-57.5*2Pump motor power kw1.5*11.5*11.5*13*1Weightkg29904070700011840Overall dimensionsmm1470*1550*9701800*1900*1210

Page 8: Orient Paper Mills

2200*2150*15003670*2517*2050Electrical power transmission machine kw3333

Page 9: Orient Paper Mills

Pulp mill

A pulp mill is a manufacturing facility that converts wood chips or other plant fibre source into a thick fibre board which can be shipped to a paper mill for further processing. Pulp can be manufactured using mechanical, semi-chemical or fully chemical methods (kraft and sulfite processes). The finished product may be either bleached or non-bleached, depending on the customer requirements.

Wood and other plant materials used to make pulp contain three main components (apart from water): cellulose fibres (desired for papermaking), lignin (a three-dimensional polymer that binds the cellulose fibres together) and hemicelluloses, (shorter branched carbohydrate polymers). The aim of pulping is to break down the bulk structure of the fibre source, be it chips, stems or other plant parts, into the constituent fibres.

Chemical pulping achieves this by degrading the lignin and hemicellulose into small, water-soluble molecules which can be washed away from the cellulose fibers without depolymerizing the cellulose fibres (chemically depolymerizing the cellulose weakens the fibres). The various mechanical pulping methods, such as groundwood (GW) and refiner mechanical (RMP) pulping, physically tear the cellulose fibres one from another. Much of the lignin remains adhering to the fibres. Strength is impaired because the fibres may be cut. There are a number of related hybrid pulping methods that use a combination of chemical and thermal treatment to begin an abbreviated chemical pulping process, followed

Page 10: Orient Paper Mills

immediately by a mechanical treatment to separate the fibres. These hybrid methods include thermomechanical pulping (TMP) and chemithermomechanical pulping (CTMP). The chemical and thermal treatments reduce the amount of energy subsequently required by the mechanical treatment, and also reduce the amount of strength loss suffered by the fibres.

The mill

Much of the information about the technology in following subsections is from the book by C.J. Biermann.. The chemistry of the various pulping processes can be found in Sjöström's book.

Preparation of fibre source

The most common fibre source for pulp mills is pulpwood. Other common sources are bagasse and fibre crops. The first step in all mills using wood (trees) as the fibre source is to remove the bark. Bark contains relatively few usable fibers and darkens the pulp. The removed bark is burned, along with other unusable plant material, to generate steam to run the mill. Almost all wood is then chipped before it processed further to free the fibers.

Removal of the bark is done in a barker (or debarker). The bark adhesion is about 3-5 kg/cm2 in the growing season (summer) and 2-3 times higher in the dormant season (winter). The bark of frozen logs is even more difficult to remove.

In chemical pulp mills the bark is introducing unwanted contaminants as calcium, silica and aluminum that are causing scaling and gives an extra load for the chemical recovery system. Birch bark contains betulin, a terpenoid that easily makes deposits in a pulp mill.

Page 11: Orient Paper Mills

Tissue and pilot plant

Tissue paper is a lightweight, light crêped paper. Tissue can be made both from virgin and recycled paper pulp.

Properties

Tissue papers is used to make a huge range of products with different properties and quality demands. Key properties are: strength, absorbency, basis weight, thickness (bulk), brightness, stretch, appearance and comfort.

Production

Main article: Fourdrinier machine

Tissue paper is produced on a paper machine that has a single large steam heated drying cylinder (yankee dryer) fitted with a hot air hood. The raw material is paper pulp. The yankee cylinder is sprayed with adhesives to make the paper stick. Creping is done by the yankee's doctor blade that is scraping the dry paper off the cylinder surface. The crinkle (crêping) is controlled by the strength of the adhesive, geometry of the doctor blade, speed difference between the yankee and final section of the paper machine and paper pulp characteristics.

The properties are controlled by pulp quality, crêping and additives (both in base paper and as coating). The wet strength is often an important paramenter for tissue paper.

Page 12: Orient Paper Mills

Applications

Hygienic tissue paper

Hygienic tissue paper is commonly used for facial tissue (paper handkerchiefs), napkins, bathroom tissue and household towels. Paper has been used for hygiene purposes for centuries, but tissue paper as we know it today was not produced in USA before the mid-1940s. In Western Europe large scale industrial production started in the beginning of 1960s.

Facial tissues

Main article: Facial tissue

Facial tissue (paper handkerchiefs) refers to a class of soft, absorbent, disposable paper that is suitable for use on the face. The term is commonly used to refer to the type of facial tissue, usually sold in boxes, that is designed to facilitate the expulsion of nasal mucus from the nose although it may refer to other types of facial tissues including napkins and wipes.

The first tissue handkerchiefs were introduced in the 1920's. They have been refined over the years, especially for softness and strength, but their basic design has remained constant. Today each person in Western Europe uses about 200 tissue handkerchiefs a year, with a variety of 'alternative' functions including the treatment of minor wounds, the cleaning of face and hands and the cleaning of spectacles.

The importance of the paper tissue on minimising the spread of an infection has been highlighted in light of fears over a swine flu epidemic. In the UK, for example, the Government ran a campaign called “Catch it, bin it, kill it”, which encouraged people to cover their mouth with a paper tissue when coughing or sneezing.

Page 13: Orient Paper Mills

Paper towels

Main article: Paper towel

Paper towels are the second largest application for tissue paper in the consumer sector. This type of paper has usually a basis weight of 20 to 24 g/m2. Normally such paper towels are two-ply. This kind of tissue can be made from 100% chemical pulp to 100% recycled fibre or a combination of the two. Normally, some long fibre chemical pulp is included to improve strength.

Wrapping Tissue

Main article: Wrapping tissue

Wrapping tissue is a type of thin, translucent paper used for wrapping and cushioning fragile items.

Toilet Tissue

Main article: Toilet paperRolls of toilet paper have been available since the end of the 19th century. Today, more than 20 billion rolls of toilet tissue are used each year in Western Europe.[2]

Table napkins

Table napkins can be made of tissue paper. These are made from one up to four plies and in a variety of qualities, sizes, folds, colours and patterns depending on intended use and prevailing fashions. The composition of raw materials varies a lot from deinked to chemical pulp depending on quality.

The Industry

Out of the world's estimated production of 21 million tonnes of tissue, Europe produces approximately six million tonnes.

Page 14: Orient Paper Mills

The European tissue market is worth approximately 10 billion Euros annually and is growing at a rate of around 3%. The European market represents around 23% of the global market. Of the total paper and board market tissue accounts for 10%. In North America, people are consuming around three times as much tissue as in Europe.

In Europe, the industry is represented by The European Tissue Symposium (ETS), a trade association. The members of ETS represent the majority of tissue paper producers throughout Europe. and about 90% of total European tissue production. ETS was founded in 1971 and is based in Brussels since 1992.

Sustainability

The paper tissue industry, along with the rest of the paper manufacturing sector, has worked hard to minimise its impact on the environment. Recovered fibres now represent some 46.5% of the paper industry’s raw materials. The industry relies heavily on biofuels (about 50% of its primary energy) and it is highly energy-efficient. Its specific primary energy consumption has decreased by 16% and the specific electricity consumption has decreased by 11%, due to measures such as improved process technology and investment in combined heat and power (CHP). Specific carbon dioxide emissions from fossil fuels decreased by 25% due to process-related measures and the increased use of low-carbon and biomass fuels. Once consumed, most forest-based paper products start a new life as recycled material or biofuel

EDANA, the trade body for the non-woven absorbent hygiene products industry (which includes products such as household wipes for use in the home) has reported annually on the industry’s environmental performance since 2005. The industry’s impact on the environment is, in fact, relatively small. For example, less than 1% of all commercial wood production ends up as wood pulp in absorbent hygiene products. In addition, the industry contributes

Page 15: Orient Paper Mills

less than 0.5% of all solid waste and around 2% of municipal solid waste (MSW) compared with paper and board, garden waste and food waste which each comprise between 18 and 20 percent of MSW.

There has been a great deal of interest, in particular, in the use of recovered fibres to manufacture new tissue paper products. However, whether this is actually better for the environment than using new fibres is open to question. A Life Cycle Assessment study indicated that neither fibre type can be considered environmentally preferable. In this study both new fibre and recovered fibre offer environmental benefits and shortcomings.

Total environmental impacts vary case by case, depending on for example the location of the tissue paper mill, availability of fibres close to the mill, energy options and waste utilization possibilities. There are opportunities to minimise environmental impacts when using each fibre type.

When using recovered fibres, it is beneficial to:

Source fibres from integrated deinking operations to eliminate the need for thermal drying of fibre or long distance transport of wet pulp,

Manage deinked sludge in order to maximise beneficial applications and minimise waste burden on society; and

Select the recovered paper depending on the end-product requirements and that also allows the most efficient recycling process.

When using new fibres, it is beneficial to:

Manage the raw material sources to maintain legal, sustainable forestry practices by implementing processes such as forest certification systems and chain of custody standards2; and

Page 16: Orient Paper Mills

Consider opportunities to introduce new and more renewable energy sources and increase the use of biomass fuels to reduce emissions of carbon dioxide.

When using either fibre type, it is beneficial to:

Improve energy efficiency in tissue manufacturing; Examine opportunities for changing to alternative, non fossil

based sources, of energy for tissue manufacturing operations Deliver products that maximise functionality and optimize

consumption; and Investigate opportunities for alternative product disposal

systems that minimize the environmental impact of used products.

The Confederation of European Paper Industries has published reports focusing on the industry’s environmental credentials. In 2002, it noted that “a little over 60% of the pulp and paper produced in Europe comes from mills certified under one of the internationally recognised eco-management schemes”. There are a number of ‘eco-labels’ designed to help consumers identify paper tissue products which meet such environmental standards. Eco-labelling entered mainstream environmental policy-making in the late seventies, first with national schemes such as the German Blue Angel programme, to be followed by the Nordic Swan (1989). In 1992 a European eco-labelling regulation, known as the EU Flower, was also adopted. The stated objective is to support sustainable development, balancing environmental, social and economical criteria.

Page 17: Orient Paper Mills

Thanking you