Upload
stephane-schein
View
212
Download
0
Embed Size (px)
DESCRIPTION
(for ICP, AAS, Fluorescence X, Rotrode electrode emission) Pour Point °C Viscosity cSt ‣ Choose your elements indicating their concentration in mg/kg ‣ Indicate the nature of the base oil, the nature of the oil blank if necesary, the mass in the bottle and the number of Number of bottles (100g, 200G or other) Flash Point °C -7 (+20) 175 mini.
Citation preview
Volume:100 or 250 ml
Number of bottles :
PRINT THIS PAGE AND SEND BY FAX TO
0208 950 1603 FOR AN IMMEDIATE QUOTATION
• Those custom-made multi-elements are soluble in aromatic and paraffinic hydrocarbides such as mineral oils, xylene and cetones as MIBK.• To manufacture those solutions, we use organometallic mono-elements, their concentration is 5000 ppm, 2000 ppm for the Sc, 100 ppm for AS, Hg and Se.• The different concentrations are measured by gravimetry (precision lower than +/- 2%) and controled by ICP.
Company:
Name:
Tel:
Fax:
Email:
Date:
Custom Made Solution of Organo-Metallic Standards in an Organic Oil Quotation Request
(for ICP, AAS, Fluorescence X, Rotrode electrode emission)
ACN CHEMICALS UK Ltd. - Second Floor, 27 Gloucester Place, London, W1U 8HU, United KingdomTel: +44 (0) 207 193 9114 - Fax:+44 (0) 208 950 1603 - Email: [email protected] - Web: www.spectracer.co.uk
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Ag Cd La Pb Ti
Al Co Li S V
As Cr Mg Sb W
B Cu Mn Sc Y
Ba Fe Mo Se Zn
Be Hg Na Si Other
Bi In Ni Sn Other
Ca K P Sr Other
‣Choose your elements indicating their concentration in mg/kg‣ Indicate the nature of the base oil, the nature of the oil blank if necesary, the mass in the bottle and the number of
bottles required.
Mix OilOil - 20 Oil - 75
or other mix
Oil BlankOil - 20Oil - 75
Mass in bottle
(100g, 200G or other)
Number of bottles
Reference Density 25°C
Viscosity cSt
Pour Point °C
Flash Point °C
Trace level
Oil - 20 0.84-0.86 14-18 at 40°C -7 (+20) 175 mini. <0.10 ppm
Oil - 75 0.86-0.89 65-72 at 40°C -15 (+20) 215 mini. <0.15 ppm
Specification of oil base for the preparation of mixes