ORDER: PURCHASE ORDER NO. - Apex Conveyor1 3/8" Diameter x 18 Gauge Roller Conveyor 138SRGA- SPECIFICATIONS WIDTHS: 10", 13", 16" and 22" Between Frame (B.F.) LENGTHS: 5' and 10' straight

Distributor:_________________________________________________________ Date:______________

QUOTATION Conditions Dry and Clean Oil/Grease Moisture/Humidity Food handling Dust /Abrasives Corrosive Outdoors Washdown Heat or Cold (Degree_________) High Speed (RPM___________)

Bearings Standard Machined Precision Plastic Bushing Other________

Lubrication Oiled Greased

1. Roller Diameter

2. Tube Gauge or Load

3. Tube Material Plain steel Galvanized steel Aluminum Stainless steel Plastic CoveredIf covered type:______________________

4. Shaft Size

Hex Round

Dimension______________ inchesShaft Material Steel Aluminum Stainless SteelShaft Rentension Spring Cottered Other________

5. Between Frame (B.F.)

6. Shaft Length(STANDARD 1/4"-7/16"=B.F.+1")(STANDARD 1/2"-1 1/16"=B.F.+1 1/2")

7. Chain Driven RollerNumber of Sprockets:_________

Sprocket Series 40 50 60Number of Teeth_____________Sprocket Location "A" ____________ inches "B" ____________ inches

8. Line Shaft RollerNumber of grooves:_________________ "A" ____________ inches "B" ____________ inches

Special Notes:

ORDER: PURCHASE ORDER NO.__________________________

Roller Data Worksheet

GRAVITY ROLLER POWERED ROLLER

CHAIN DRIVEN ROLLER

QUANTITY OF ROLLERS REQUIRED:______________________

LINE SHAFT DRIVEN ROLLER

Distributor:______________________________________________________Date:______________

Salesperson:__________________________________ Address:______________________________________________

1. Type of conveyor 13. Motor: Gravity Belt Live Roller Voltage___________Phase______Cycles_______ Roller Slider bed Flat belt Line shaft If existing (horsepower)________________ Skatewheel Roller bed V-belt Chain Standard open Totally enclosed

Washdown Explosion proof2. Conveyor: Length:____________Width____________ DC Other_____________

3.Conveyor height: 14. Drive location? Horizontal_______________inches End bottom End top Center bottom Decline/Incline______inches-bottom______inches-top If decline/incline net change in elevation______inches 15. Motor mount location?

End bottom End top End side4. If existing system, what are roller centers?____________ Center bottom Center side

If top mounted clearance required?___________inches5. Package type Cartons Pallets Crates 16. Speed of Conveyor: Wood boxes Paper rolls Bags Constant speed at ________feet per minute Tote pans Cloth rolls Baskets Variable speed from ______to_______feet per minute Bundles Drums (steel or plastic) Others_________________________ 17. Will pneumatic devices be used? Describe package bottom Available air pressure:______________P.S.I. Runners* Flat Other_______________ *(Sketch required) 18. Are guardrails required? Yes No

If yes what type? Fixed Adjustable How High?_____________inches

Length Width Heigth Weight19. Incline/decline belt: Is feed belt required?

Average Yes No Length?_______inches Maximum Is nose over required?

Yes No 7. If cartons are handled, are flaps open? Yes No 20. Additional Information:

8. Type of conditions: Dry and clean Oil or grease Moisture or humidity Food handling Dust or abrasives Corrosive Heat or cold (Degree_________)

9. Shock Load: If load is dropped: Length of Drop?______________________________ Location? (I.e. end, middle)___________________

10. Total live load: Carton wt._____ x No.on conveyor_____= Live load________

11. Total hours of operation: Per day?____________________ Per week?___________________

12. Number of start/stops: No load:__________________ Loaded:__________________ Starts/stops per minute:__________

13. Motor: Voltage___________Phase______Cycles_______ If existing (horsepower)________________ Standard open Totally enclosed Washdown Explosion proof DC Other_____________

Minimum

6. Size, weight of packages to be handled:

Conveyor Data Worksheet

Skatewheel Conveyor

SW- SPECIFICATIONS

WIDTHS: 12", 15" 18" and 24"Over all width(OAW), other widths available.LENGTHS: 5' and 10' straight sections, other lengths available.CURVES: 90 and 45 Degree with 24" inside radiusFRAMES: 2-1/2" x 1" Flange x 12 ga galvanized steel CROSS MEMBERS : 12 ga galvanized bolt in constructionWHEELS: 1-15/16" Diameater with .625" tread

AXLES: 1/4"dia. SteelCOUPLINGS: Hook and Rod or Bolted Butt typeCAPACITY: 10' support centers; 50 lbs per foot loading Straight Section - Steel5' support centers; 50 lbs per roller with 120 lbs per for loading

Some other options Include:

- Palstic or Aluminum Wheels and Aluminum Frames

- Stainless Steel Roll Tubes and or Frames 12SW-6- 6 55 30

12SW-8- 8 59 32

12SW-10 10 63 34

Curved & Spured Section - Steel 12SW-12- 12 67 36

12SW-16 16 75 40

12SW-20 20 79 42

12SWC-90 10 WPF 90 24" 40

12SWC-45 10 WPF 45 24" 21 15SW-6- 6 58 31

12SWS-30 10 WPF 30 Spur 24" 39 15SW-8- 8 62 33

12SWS-45 10 WPF 45 Spur 24" 40 15SW-10- 10 66 35

15SW-12- 12 70 37

15SW-16- 16 78 41

15SW-26- 26 82 43

15SWC-90 12 WPF 90 24" 46

15SWC-45 12 WPF 45 24" 23

15SWS-30 12 WPF 30 Spur 24" 43

15SWS-45 12 WPF 45 Spur 24" 44 18SW-12- 12 72 38

18SW-14- 14 76 40

18SW-16- 16 80 42

18SW-18- 18 84 44

18SWC-90 16 WPF 90 24" 49 18SW-20- 20 88 46

18SWC-45 16 WPF 45 24" 25 18-SW-32- 32 112 58

18SWS-30 16 WPF 30 Spur 24" 47

18SWS-45 16 WPF 45 Spur 24" 48

24SW-16- 16 88 46

24SW-18- 18 92 48

24SWC-90 20WPF 90 36" 72 24SW-20- 20 96 50

24SWC-45 20WPF 45 36" 37 24SW-24- 24 104 54

24SWS-30 20WPF 30 Spur 36" 57 24SW-28- 28 112 58

24SWS-45 20WPF 45 Spur 36" 58 24SW-44- 44 144 74

16" BF (18" OAW)

Model Number Wheels per foot Weight 10'0" Weight 5'0"

Wheels per foot Weight 10'0" Weight 5'0"

22" BF (24" OAW)

13" BF (15" OAW)

Model Number Wheels per foot Weight 10'0" Weight 5'0"

22" BF (24" OAW)

Model Number Pattern Degree WeightInside Radius

Model Number Pattern Degree WeightInside Radius

Pattern Degree Weight

16" BF (18" OAW)

Inside Radius

Model Number Degree Weight

10" BF (12" OAW)

Inside Radius

Model Number

Pattern

Wheels per foot Weight 10'0" Weight 5'0"

10" BF (12" OAW)

Model Number

13" BF (15" OAW)

Model Number

1 3/8" Diameter x 18 Gauge Roller Conveyor

138SRGA- SPECIFICATIONS

WIDTHS: 10", 13", 16" and 22" Between Frame (B.F.)

LENGTHS: 5' and 10' straight sections

CURVES: 90 and 45 degree (24" inside radius)

FRAMES: 2 1/2" x 1" flange x 12 gauge galvanized steel (3 1/2" x 1" on set low )

CROSS MEMBERS : 12 gauge galvanized bolted construction

ROLLERS: 1 3/8" x 18 gauge galvanized steel tube with self-aligned ball bearings, crimped in for firm bearing seat. Axle spring retained.

AXLES: 1/4"dia. steel

COUPLINGS: Hook and rod or bolted butt typeCAPACITY: 50 lbs per roller 10' support centers; 50 lbs per foot loading Straight section - steel 5' support centers; 120 lbs per foot loadingAvailable options:Aluminum roll tubes and/or framesStainless steel roll tubes and/or frames 138SRGA-10-1.5-XXX 1 1/2" 118 77

Between frame widths and lengths 138SRGA-10-3-XXX 3" 77 56

Spurs and merges 138SRGA-10-4.5-XXX 4 1/2" 63 49

138SRGA-10-6-XXX 6" 56 46

Curved section - steel 138SRGA-10-9-XXX 9" 49 42

138SRGA-10-12-XXX 12" 46 40

138SRGA-10-1.5S-90 1 1/2" 90 48

138SRGA-10-1.5S-45 1 1/2" 45 24 138SRGA-13-1.5-XXX 1 1/2" 135 85

138SRGA-10-3S-90 3" 90 35 138SRGA-13-3-XXX 3" 85 60

138SRGA-10-3S-45 3" 45 17 138SRGA-13-4.5-XXX 4 1/2" 69 52

138SRGA-13-6-XXX 6" 60 48

138SRGA-13-9-XXX 9" 52 44

138SRGA-13-12-XXX 12" 48 41

138SRGA-13-1.5S-90 1 1/2" 90 51

138SRGA-13-1.5S-45 1 1/2" 45 26

138SRGA-13-3S-90 3" 90 36

138SRGA-13-3S-45 3" 45 18 138SRGA-16-1.5-XXX 1 1/2" 152 94

138SRGA-16-3-XXX 3" 96 64

138SRGA-16-4.5-XXX 4 1/2" 74 55

138SRGA-16-6-XXX 6" 64 50

138SRGA-16-1.5S-90 1 1/2" 90 54 138SRGA-16-9-XXX 9" 55 45

138SRGA-16-1.5S-45 1 1/2" 45 27 138SRGA-16-12-XXX 12" 50 52

138SRGA-16-3S-90 3" 90 37

138SRGA-16-3S-45 3" 45 19

138SRGA-22-1.5-XXX 1 1/2" 185 110

138SRGA-22-3-XXX 3" 110 73

138SRGA-22-1.5S-90 1 1/2" 90 141 138SRGA-22-4.5-XXX 4 1/2" 85 60

138SRGA-22-1.5S-45 1 1/2" 45 68 138SRGA-22-6-XXX 6" 73 54

138SRGA-22-3S-90 3" 90 86 138SRGA-22-9-XXX 9" 60 48

138SRGA-22-3S-45 3" 45 43 138SRGA-22-12-XXX 12" 54 43

16" BF (18" OAW)

Model Number Roller Centers

Weight 10'0"

Weight 5'0"

Roller Centers

Weight 10'0"

Weight 5'0"

22" BF (24" OAW)

13" BF (15" OAW)


Weight 10'0"

Weight 5'0"

22" BF (24" OAW)

Model Number Roller Centers Degree Weight

Model Number Roller Centers Degree Weight

Roller Centers Degree Weight

16" BF (18" OAW)

Model Number Degree Weight

10" BF (12" OAW)

Model Number

Roller Centers

Roller Centers

Weight 10'0"

Weight 5'0"

10" BF (12" OAW)

Model Number

13" BF (15" OAW)

Model Number

1.9" Diameter x 16 Gauge Roller Conveyor196SRGA- SPECIFICATIONS

WIDTHS: 5" to 60" Between Frames (B.F.)LENGTHS: 5' and 10' straight sectionsCURVES: 90 and 45 degree (32 1/2" radius up to 30" B.F. over 31" B.F. have 48" radius)FRAMES: 3 1/2" x 1 1/2" flange x 10 gauge hot rolled steel (4 1/2" x 1 1/2" on set low) CROSS MEMBERS : 12 gauge galvanized bolted constructionROLLERS: 1.9" x 16 gauge galvanized steel tube with self-aligned ball bearings, crimped in for firm bearing seat. Axle spring retained. AXELS: 7/16" Hex SteelCOUPLINGS: Bolted butt typeCAPACITY: 250 lbs per roller 10' support centers; 135 lbs per foot 5' support centers; 310 lbs per foot 196SRGA-6-2-XXX 2" 142 73

196SRGA-6-3-XXX 3" 114 59Available options: 196SRGA-6-4.5-XXX 4 1/2" 96 50Aluminum roll tubes and/or frames 196SRGA-6-6-XXX 6" 86 45Stainless steel roll tubes and/or frames 196SRGA-6-9-XXX 9" 76 40Between frames widths and lengths 196SRGA-6-12-XXX 12" 72 38Spurs and merges 196SRGA-12-2-XXX 2" 199 102

196SRGA-12-3-XXX 3" 153 78196SRGA-12-4.5-XXX 4 1/2" 123 63196SRGA-12-12-XXX 6" 107 55196SRGA-12-9-XXX 9" 90 47196SRGA-12-12-XXX 12" 84 44

196SRGA-6-SC-XX 6" 32 1/2" 64 196SRGA-18-2-XXX 2" 256 130196SRGA-12-SC-XX 12" 32 1/2" 91 196SRGA-18-3-XXX 3" 192 98196SRGA-18-SC-XX 18" 32 1/2" 119 196SRGA-18-4.5-XXX 4 1/2" 150 77196SRGA-24-SC-XX 24" 32 1/2" 183 196SRGA-18-18-XXX 6" 127 66196SRGA-30-SC-XX 30" 32 1/2" 231 196SRGA-18-9-XXX 9" 104 54196SRGA-36-SC-XX 36" 48" 266 196SRGA-18-12-XXX 12" 95 49196SRGA-42-SC-XX 42" 48" 302 196SRGA-24-2-XXX 2" 313 159196SRGA-48-SC-XX 48" 48" 338 196SRGA-24-3-XXX 3" 230 117196SRGA-54-SC-XX 54" 48" 374 196SRGA-24-4.5-XXX 4 1/2" 176 90

196SRGA-24-24-XXX 6" 147 76196SRGA-24-9-XXX 9" 118 61196SRGA-24-12-XXX 12" 106 55

196SRGA-6-DC-XX 6" 32 1/2" 196SRGA-30-2-XXX 2" 370 187196SRGA-12-DC-XX 12" 32 1/2" 196SRGA-30-3-XXX 3" 269 136196SRGA-18-DC-XX 18" 32 1/2" 146 196SRGA-30-4.5-XXX 4 1/2" 203 104196SRGA-24-DC-XX 24" 32 1/2" 225 196SRGA-30-30-XXX 6" 168 86196SRGA-30-DC-XX 30" 32 1/2" 282 196SRGA-30-9-XXX 9" 133 68196SRGA-36-DC-XX 36" 48" 326 196SRGA-30-12-XXX 12" 117 61196SRGA-42-DC-XX 42" 48" 370 196SRGA-36-2-XXX 2" 427 216196SRGA-48-DC-XX 48" 48" 414 196SRGA-36-3-XXX 3" 308 156196SRGA-54-DC-XX 54" 48" 458 196SRGA-36-4.5-XXX 4 1/2" 230 117


196SRGA-6-TC-XX 6" 32 1/2" 196SRGA-42-2-XXX 2" 484 244196SRGA-12-TC-XX 12" 32 1/2" 196SRGA-42-3-XXX 3" 346 175196SRGA-18-TC-XX 18" 32 1/2" 128 196SRGA-42-4.5-XXX 4 1/2" 257 130196SRGA-24-TC-XX 24" 32 1/2" 162 196SRGA-42-42-XXX 6" 209 106196SRGA-30-TC-XX 30" 32 1/2" 190 196SRGA-42-9-XXX 9" 161 82196SRGA-36-TC-XX 36" 48" 338 196SRGA-42-12-XXX 12" 140 72196SRGA-42-TC-XX 42" 48" 368 196SRGA-48-2-XXX 2" 541 273196SRGA-48-TC-XX 48" 48" 396 196SRGA-48-3-XXX 3" 385 195196SRGA-54-TC-XX 54" 48" 437 196SRGA-48-4.5-XXXX 4 1/2" 284 144Wt. based on 3" nominal roller centers 196SRGA-48-48-XXX 6" 229 117

196SRGA-48-9-XXX 9" 175 89196SRGA-48-12-XXX 12" 151 78196SRGA-54-2-XXX 2" 598 301196SRGA-54-3-XXX 3" 424 214196SRGA-54-4.5-XXX 4 1/2" 311 157196SRGA-54-54-XXX 6" 250 127196SRGA-54-9-XXXX 9" 189 96196SRGA-54-12-XXX 12" 162 83

Tapered Roller

Model Number Between Frame Radius 90

Degree

54

Width BF

24

30

36

18

42

48


Degree

Radius

Curved section - steel

Straight section - steel

Split Roller(Dual)

90 Degree

Straight Roller

Model Number Between Frame

Weight 10'0" Weight 5'0"Model Number Roller Centers

6

12

1.9" Diameter x 12 Gauge Roller Conveyor192SRGA- SPECIFICATIONS

WIDTHS: 5" to 60" Between Frames (B.F.)LENGTHS: 5' and 10' straight sectionsCURVES: 90 and 45 degree (32 1/2" radius up to 30" BF over 31" BF have 48" radius)FRAMES: 3 1/2" x 1 1/2" flange x 10 gauge hot rolled steel (4 1/2" x 1 1/2" on set low) CROSS MEMBERS : 12 gauge galvanized bolted constructionROLLERS: 1.9" x 12 gauge galvanized steel tube with self-aligned ball bearings, crimped in for firm bearing seat. Axle spring retained. AXELS: 7/16" hex steelCOUPLINGS: Bolted butt typeCAPACITY: 250 lbs per roller 10' support centers; 135 lbs per foot 5' support centers; 310 lbs per foot 192SRGA-6-2-XXX 2" 166 85

192SRGA-6-3-XXX 3" 130 67

Available options: 192SRGA-6-4.5-XXX 4 1/2" 107 55

Stainless steel roll tubes and/or frames 192SRGA-6-6-XXX 6" 94 49

Between frames widths and lengths 192SRGA-6-9-XXX 9" 82 43

Special bearings 192SRGA-6-12-XXX 12" 76 40

Spurs and merges 192SRGA-12-2-XXX 2" 248 126192SRGA-12-3-XXX 3" 185 95192SRGA-12-4.5-XXX 4 1/2" 145 74192SRGA-12-12-XXX 6" 123 63192SRGA-12-9-XXX 9" 101 52192SRGA-12-12-XXX 12" 92 48

192SRGA-6-SC-XX 6" 32 1/2" 74 192SRGA-18-2-XXX 2" 329 166192SRGA-12-SC-XX 12" 32 1/2" 112 192SRGA-18-3-XXX 3" 240 122192SRGA-18-SC-XX 18" 32 1/2" 150 192SRGA-18-4.5-XXX 4 1/2" 182 93192SRGA-24-SC-XX 24" 32 1/2" 239 192SRGA-18-18-XXX 6" 151 78192SRGA-30-SC-XX 30" 32 1/2" 300 192SRGA-18-9-XXX 9" 120 62192SRGA-36-SC-XX 36" 48" 349 192SRGA-18-12-XXX 12" 107 55192SRGA-42-SC-XX 42" 48" 399 192SRGA-24-2-XXX 2" 410 207192SRGA-48-SC-XX 48" 48" 448 192SRGA-24-3-XXX 3" 295 150192SRGA-54-SC-XX 54" 48" 498 192SRGA-24-4.5-XXX 4 1/2" 220 112


192SRGA-6-DC-XX 6" 32 1/2" 192SRGA-30-2-XXX 2" 492 248192SRGA-12-DC-XX 12" 32 1/2" 192SRGA-30-3-XXX 3" 350 177192SRGA-18-DC-XX 18" 32 1/2" 183 192SRGA-30-4.5-XXX 4 1/2" 258 131192SRGA-24-DC-XX 24" 32 1/2" 292 192SRGA-30-30-XXX 6" 208 106192SRGA-30-DC-XX 30" 32 1/2" 367 192SRGA-30-9-XXX 9" 159 81192SRGA-36-DC-XX 36" 48" 427 192SRGA-30-12-XXX 12" 138 71192SRGA-42-DC-XX 42" 48" 488 192SRGA-36-2-XXX 2" 573 288192SRGA-48-DC-XX 48" 48" 549 192SRGA-36-3-XXX 3" 405 204192SRGA-54-DC-XX 54" 48" 610 192SRGA-36-4.5-XXX 4 1/2" 296 150


192SRGA-6-TC-XX 6" 32 1/2" 192SRGA-42-2-XXX 2" 654 329192SRGA-12-TC-XX 12" 32 1/2" 192SRGA-42-3-XXX 3" 460 232192SRGA-18-TC-XX 18" 32 1/2" 141 192SRGA-42-4.5-XXX 4 1/2" 333 169192SRGA-24-TC-XX 24" 32 1/2" 178 192SRGA-42-42-XXX 6" 265 135192SRGA-30-TC-XX 30" 32 1/2" 209 192SRGA-42-9-XXX 9" 197 101192SRGA-36-TC-XX 36" 48" 372 192SRGA-42-12-XXX 12" 168 86192SRGA-42-TC-XX 42" 48" 405 192SRGA-48-2-XXX 2" 736 370192SRGA-48-TC-XX 48" 48" 436 192SRGA-48-3-XXX 3" 515 259192SRGA-54-TC-XX 54" 48" 481 192SRGA-48-4.5-XXX 4 1/2" 371 188

Wt. based on 3" nominal roller centers 192SRGA-48-48-XXX 6" 294 149192SRGA-48-9-XXX 9" 217 110192SRGA-48-12-XXX 12" 184 94192SRGA-54-2-XXX 2" 817 410192SRGA-54-3-XXX 3" 570 287192SRGA-54-4.5-XXX 4 1/2" 409 207192SRGA-54-54-XXX 6" 323 163192SRGA-54-9-XXX 9" 236 120192SRGA-54-12-XXX 12" 199 101

Between Frame Radius 90

Degree

90 Degree

Between Frame

Tapered Roller (non standard)

Model Number

12Curved section - steel


6

Straight Roller

Model Number

Width BF Weight 10'0" Weight 5'0"

Straight section - steel

Split Roller(Dual)


Degree

Radius

54

24

30

36

18

42

48

1.9" Diameter x 9 Gauge Roller Conveyor199SRHA- SPECIFICATIONS

WIDTHS: 5" to 60" Between Frames (B.F.)LENGTHS: 5' and 10' straight sectionsCURVES: 90 and 45 degree (32 1/2" radius up to 30" B.F. over 31" B.F. have 48" radius)FRAMES: 3 1/2" x 1 1/2" flange x 10 gauge hot rolled steel (4 1/2" x 1 1/2" on set low ) CROSS MEMBERS : 12 gauge galvanized bolted constructionROLLERS: 1.9" x 9 gauge hot rolled steel tube with self-aligned ball bearings, crimped in for firm bearing seat. Axle spring retained. AXELS: 7/16" hex steelCOUPLINGS: Bolted butt typeCAPACITY: 250 lbs per roller 10' support centers; 135 lbs per foot 5' support centers; 310 lbs per foot 199SRHA-6-2- 2" 185 95

199SRHA-6-3- 3" 143 73

Available options: 199SRHA-6-4.5- 4 1/2" 115 60

Stainless steel roll tubes and/or frames 199SRHA-6-6- 6" 101 52

Between frames widths and lengths 199SRHA-6-9- 9" 86 45

Special Bearings 199SRHA-6-12- 12" 79 42

Spurs and merges 199SRHA-12-2- 2" 286 145199SRHA-12-3- 3" 211 107199SRHA-12-4.5- 4 1/2" 162 83199SRHA-12-12- 6" 135 70199SRHA-12-9- 9" 109 57199SRHA-12-12- 12" 98 51

199SRHA-6-SC- 6" 32 1/2" 82 199SRHA-18-2- 2" 386 195199SRHA-12-SC- 12" 32 1/2" 128 199SRHA-18-3- 3" 278 141199SRHA-18-SC- 18" 32 1/2" 173 199SRHA-18-4.5- 4 1/2" 208 106199SRHA-24-SC- 24" 32 1/2" 282 199SRHA-18-18- 6" 170 87199SRHA-30-SC- 30" 32 1/2" 354 199SRHA-18-9- 9" 133 68199SRHA-36-SC- 36" 48" 414 199SRHA-18-12- 12" 116 60199SRHA-42-SC- 42" 48" 474 199SRHA-24-2- 2" 486 245199SRHA-48-SC- 48" 48" 535 199SRHA-24-3- 3" 346 175199SRHA-54-SC- 54" 48" 595 199SRHA-24-4.5- 4 1/2" 254 129

199SRHA-24-24- 6" 205 105199SRHA-24-9- 9" 156 80199SRHA-24-12- 12" 135 69

199SRHA-6-DC- 6" 32 1/2" 199SRHA-30-2- 2" 586 295199SRHA-12-DC- 12" 32 1/2" 199SRHA-30-3- 3" 413 209199SRHA-18-DC- 18" 32 1/2" 212 199SRHA-30-4.5- 4 1/2" 301 152199SRHA-24-DC- 24" 32 1/2" 345 199SRHA-30-30- 6" 240 122199SRHA-30-DC- 30" 32 1/2" 433 199SRHA-30-9- 9" 179 92199SRHA-36-DC- 36" 48" 507 199SRHA-30-12- 12" 153 79199SRHA-42-DC- 42" 48" 580 199SRHA-36-2- 2" 687 345199SRHA-48-DC- 48" 48" 654 199SRHA-36-3- 3" 481 242199SRHA-54-DC- 54" 48" 728 199SRHA-36-4.5- 4 1/2" 347 175

199SRHA-36-36- 6" 275 139199SRHA-36-9- 9" 203 103199SRHA-36-12- 12" 172 88

199SRGA-6-TC-XX 6" 32 1/2" 199SRHA-42-2- 2" 787 396199SRGA-12-TC-XX 12" 32 1/2" 199SRHA-42-3- 3" 548 276199SRGA-18-TC-XX 18" 32 1/2" 156 199SRHA-42-4.5- 4 1/2" 393 199199SRGA-24-TC-XX 24" 32 1/2" 196 199SRHA-42-42- 6" 310 157199SRGA-30-TC-XX 30" 32 1/2" 230 199SRHA-42-9- 9" 226 115199SRGA-36-TC-XX 36" 48" 409 199SRHA-42-12- 12" 190 97199SRGA-42-TC-XX 42" 48" 445 199SRHA-48-2- 2" 887 446199SRGA-48-TC-XX 48" 48" 480 199SRHA-48-3- 3" 616 310199SRGA-54-TC-XX 54" 48" 529 199SRHA-48-4.5- 4 1/2" 440 222

Wt. based on 3" nominal roller centers 199SRHA-48-48- 6" 345 174199SRHA-48-9- 9" 250 127199SRHA-48-12- 12" 209 106199SRHA-54-2- 2" 988 496199SRHA-54-3- 3" 684 344199SRHA-54-4.5- 4 1/2" 486 245199SRHA-54-54- 6" 379 192199SRHA-54-9- 9" 273 138199SRHA-54-12- 12" 227 116

54

Split Roller(Dual)

Model Number Between Frame Radius

48

42

36

30

Weight 10'0" Weight 5'0"

Straight section - steelModel Number

90 Degree


90 Degree

Roller Centers

6

24

12

18

Straight Roller

Model Number Between Frame


Radius


Degree

2.5" Diameter x 14 Gauge Roller Conveyor254SRHA- SPECIFICATIONS

WIDTHS: 5" to 60" Between Frames (B.F.)LENGTHS: 5' and 10' straight sectionsCURVES: 90 and 45 Degree (32 1/2" Radius up to 30" B.F. over 31" B.F. have 48" Radius)FRAMES: 3 1/2" x 1 1/2" Flange x 10 gauge hot rolled steel (4 1/2" x 11/2" on set low ) CROSS MEMBERS : 12 gauge galvanized bolted constructionROLLERS: 2.5" X 14 gauge hot rolled steel tube self-aligned ball bearings, crimped in for firm bearing seat. Axle spring retained. AXELS: 7/16" Hex SteelCOUPLINGS: Bolted Butt typeCAPACITY: 350 lbs per roller 10' support centers; 135 lbs per foot 5' support centers; 310 lbs per foot 254SRHA-6-2-XXX 2" 185 95

254SRHA-6-3-XXX 3" 143 73

Available options: 254SRHA-6-4.5-XXX 4 1/2" 115 60

Stainless steel roll tubes and/or frames 254SRHA-6-6-XXX 6" 101 52

Between frames widths and lengths 254SRHA-6-9-XXX 9" 86 45

Special Bearings 254SRHA-6-12-XXX 12" 79 42

Spurs and merges 254SRHA-12-2-XXX 2" 286 145254SRHA-12-3-XXX 3" 211 107254SRHA-12-4.5-XXX 4 1/2" 162 83254SRHA-12-12-XXX 6" 135 70254SRHA-12-9-XXX 9" 109 57254SRHA-12-12-XXX 12" 98 51

254SRHA-6-SC-XX 6" 32 1/2" 56 254SRHA-18-2-XXX 2" 386 195254SRHA-12-SC-XX 12" 32 1/2" 65 254SRHA-18-3-XXX 3" 278 141254SRHA-18-SC-XX 18" 32 1/2" 73 254SRHA-18-4.5-XXX 4 1/2" 208 106254SRHA-24-SC-XX 24" 32 1/2" 96 254SRHA-18-18-XXX 6" 170 87254SRHA-30-SC-XX 30" 32 1/2" 118 254SRHA-18-9-XXX 9" 133 68254SRHA-36-SC-XX 36" 48" 128 254SRHA-18-12-XXX 12" 116 60254SRHA-42-SC-XX 42" 48" 138 254SRHA-24-2-XXX 2" 486 245254SRHA-48-SC-XX 48" 48" 149 254SRHA-24-3-XXX 3" 346 175254SRHA-54-SC-XX 54" 48" 159 254SRHA-24-4.5-XXX 4 1/2" 254 129

254SRHA-24-24-XXX 6" 205 105254SRHA-24-9-XXX 9" 156 80254SRHA-24-12-XXX 12" 135 69

254SRHA-6-DC-XX 6" 32 1/2" 254SRHA-30-2-XXX 2" 586 295254SRHA-12-DC-XX 12" 32 1/2" 254SRHA-30-3-XXX 3" 413 209254SRHA-18-DC-XX 18" 32 1/2" 90 254SRHA-30-4.5-XXX 4 1/2" 301 152254SRHA-24-DC-XX 24" 32 1/2" 118 254SRHA-30-30-XXX 6" 240 122254SRHA-30-DC-XX 30" 32 1/2" 144 254SRHA-30-9-XXX 9" 179 92254SRHA-36-DC-XX 36" 48" 157 254SRHA-30-12-XXX 12" 153 79254SRHA-42-DC-XX 42" 48" 169 254SRHA-36-2-XXX 2" 687 345254SRHA-48-DC-XX 48" 48" 182 254SRHA-36-3-XXX 3" 481 242254SRHA-54-DC-XX 54" 48" 195 254SRHA-36-4.5-XXX 4 1/2" 347 175

254SRHA-36-36-XXX 6" 275 139254SRHA-36-9-XXX 9" 203 103254SRHA-36-12-XXX 12" 172 88

254SRGA-6-TC-XX 6" 32 1/2" 254SRHA-42-2-XXX 2" 787 396254SRGA-12-TC-XX 12" 32 1/2" 254SRHA-42-3-XXX 3" 548 276254SRGA-18-TC-XX 18" 32 1/2" 156 254SRHA-42-4.5-XXX 4 1/2" 393 199254SRGA-24-TC-XX 24" 32 1/2" 196 254SRHA-42-42-XXX 6" 310 157254SRGA-30-TC-XX 30" 32 1/2" 230 254SRHA-42-9-XXX 9" 226 115254SRGA-36-TC-XX 36" 48" 409 254SRHA-42-12-XXX 12" 190 97254SRGA-42-TC-XX 42" 48" 445 254SRHA-48-2-XXX 2" 887 446254SRGA-48-TC-XX 48" 48" 480 254SRHA-48-3-XXX 3" 616 310254SRGA-54-TC-XX 54" 48" 529 254SRHA-48-4.5-XXX 4 1/2" 440 222

Wt. based on 3" nominal roller centers 254SRHA-48-48-XXX 6" 345 174254SRHA-48-9-XXX 9" 250 127254SRHA-48-12-XXX 12" 209 106254SRHA-54-2-XXX 2" 988 496254SRHA-54-3-XXX 3" 684 344254SRHA-54-4.5-XXX 4 1/2" 486 245254SRHA-54-54-XXX 6" 379 192254SRHA-54-9-XXX 9" 273 138254SRHA-54-12-XXX 12" 227 116

Straight Roller


6

Curved Section - Steel

Weight 10'0" Weight 5'0"

Straight Section - Steel

54

Width BF

24

30

36

18

42

48

12

Between Frame Radius 90

Degree


Degree

Split Roller(Dual)

Model Number



Degree


251SRPA- SPECIFICATIONS

WIDTHS: 9" TO 72" Between Frames (B.F.)LENGTHS: 5' and 10' straight sectionsCURVES: 90 and 45 Degree (32 1/2" radius up to 30" B.F. over 31" B.F. have 48" radius)FRAMES: 4" x 5.4 lb. structural steelCROSS MEMBERS : 2" x 2" x 3/16 structural angle (3" structural channel on wider frames)ROLLERS: 2 1/2 X 11 gauge hot rolled steel tube with self-aligned bearings, crimped in for firm bearing seat. Axle spring retained. AXELS: 11/16" hex steelCOUPLINGS: Bolted butt typeCAPACITY: 750 lbs per roller 10' support centers; 350 lbs per foot 5' support centers; 775 lbs per foot

Available options: 251SRPA-6-3-XXX 3" 299 158Stainless steel roll tubes and/or frames 251SRPA-6-4.5-XXX 4 1/2" 239 128Between frames widths and lengths 251SRPA-6-6-XXX 6" 210 113Special Bearings 251SRPA-6-9-XXX 9" 180 98Spurs and merges 251SRPA-6-12-XXX 12" 165 91

251SRPA-12-3-XXX 3" 347 182251SRPA-12-4.5-XXX 4 1/2" 273 145251SRPA-12-6-XXX 6" 236 126

Straight Roller 251SRPA-12-9-XXX 9" 191 104Model Number 251SRPA-12-12-XXX 12" 180 98

251SRPA-18-3-XXX 3" 444 230251SRPA-6-SC-XX 6" 32 1/2" 143 251SRPA-18-4.5-XXX 4 1/2" 340 178251SRPA-12-SC-XX 12" 32 1/2" 211 251SRPA-18-6-XXX 6" 288 152251SRPA-18-SC-XX 18" 32 1/2" 279 251SRPA-18-9-XXX 9" 236 126251SRPA-24-SC-XX 24" 32 1/2" 436 251SRPA-18-12-XXX 12" 210 113251SRPA-30-SC-XX 30" 48 546 251SRPA-24-3-XXX 3" 541 279251SRPA-36-SC-XX 36" 48" 634 251SRPA-24-4.5-XXX 4 1/2" 407 212251SRPA-42-SC-XX 42" 48" 721 251SRPA-24-6-XXX 6" 341 179251SRPA-48-SC-XX 48" 48" 809 251SRPA-24-9-XXX 9" 274 145251SRPA-54-SC-XX 54" 48" 897 251SRPA-24-12-XXX 12" 241 129251SRPA-60-SC-XX 60 48" 985 251SRPA-30-3-XXX 3" 637 327

Split Roller(Dual) 251SRPA-30-4.5-XXX 4 1/2" 475 246Model Number 251SRPA-30-6-XXX 6" 393 205

251SRPA-30-9-XXX 9" 312 164251SRPA-6-DC-XX 6" 251SRPA-30-12-XXX 12" 149 83251SRPA-12-DC-XX 12" 251SRPA-36-3-XXX 3" 734 375251SRPA-18-DC-XX 18" 32 1/2" 341 251SRPA-36-4.5-XXX 4 1/2" 542 279251SRPA-24-DC-XX 24" 32 1/2" 534 251SRPA-36-6-XXX 6" 446 231251SRPA-30-DC-XX 30" 48 668 251SRPA-36-9-XXX 9" 349 183251SRPA-36-DC-XX 36" 48" 775 251SRPA-36-12-XXX 12" 301 159251SRPA-42-DC-XX 42" 48" 883 251SRPA-42-3-XXX 3" 831 424251SRPA-48-DC-XX 48" 48" 990 251SRPA-42-4.5-XXX 4 1/2" 609 313251SRPA-54-DC-XX 54" 48" 1092 251SRPA-42-6-XXX 6" 498 257251SRPA-60-DC-XX 60" 48" 1205 251SRPA-42-9-XXX 9" 387 202

251SRPA-42-12-XXX 12" 165 91251SRPA-48-3-XXX 3" 928 472251SRPA-48-4.5-XXX 4 1/2" 676 346251SRPA-48-6-XXX 6" 550 283251SRPA-48-9-XXX 9" 425 221251SRPA-48-12-XXX 12" 362 189251SRPA-54-3-XX 3" 1024 520251SRPA-54-4.5-XXX 4 1/2" 743 380251SRPA-54-6-XXX 6" 503 260251SRPA-54-9-XXX 9" 462 239251SRPA-54-12-XXX 12" 392 204251SRPA-60-3-XXX 3" 1121 569251SRPA-60-4.5-XXX 4 1/2" 811 414251SRPA-60-6-XXX 6" 655 336251SRPA-60-9-XXX 9" 500 258251SRPA-60-12-XXX 12" 423 220

Radius

Weight 10'0"

Weight 5'0"

Straight section - steelRoller

Centers

12"

18"


Between Frame

90 Degree

9"

48"

Radius

Model NumberWidth BF

Between Frame

90 Degree

54"

60"

24"

30"

36"

42"


351SRPA- SPECIFICATIONS

WIDTHS: 9" TO 72" Between Frames (B.F.)LENGTHS: 5' and 10' straight sectionsCURVES: 90 and 45 Degree (32 1/2" radius up to 30" B.F. over 31" B.F. have 48" radius)FRAMES: 5"" x 6.7 lb. structural steelCROSS MEMBERS : 2" x 2" x 3/16 structural angle (3" structural channel on wider frames)ROLLERS: 3 1/2 X 1 gauge(.300 wall) hot rolled steel tube with self-aligned bearings, crimped in for firm bearing seat. Axle spring retained. AXELS: 1-1/16" hex steelCOUPLINGS: Bolted butt typeCAPACITY: 1200 lbs per roller 10' support centers; 660 lbs per foot 5' support centers; 1660 lbs per foot

Available options: 351SRPA-6-4-XXX 4" 239 128Stainless steel roll tubes and/or frames 351SRPA-6-6-XXX 6" 210 113Between frames widths and lengths 351SRPA-6-9-XXX 9" 180 98Special Bearings 351SRPA-6-12-XXX 12" 165 91Spurs and merges 351SRPA-12-4-XXX 4" 273 145

351SRPA-12-6-XXX 6" 236 126351SRPA-12-9-XXX 9" 191 104351SRPA-12-12-XXX 12" 180 98

Straight Roller 351SRPA-18-4-XXX 4" 340 178Model Number 351SRPA-18-6-XXX 6" 288 152

351SRPA-18-9-XXX 9" 236 126351SRPA-6-SC-XX 6" 32 1/2" 143 351SRPA-18-12-XXX 12" 210 113351SRPA-12-SC-XX 12" 32 1/2" 211 351SRPA-24-4-XXX 4" 407 212351SRPA-18-SC-XX 18" 32 1/2" 279 351SRPA-24-6-XXX 6" 341 179351SRPA-24-SC-XX 24" 32 1/2" 436 351SRPA-24-9-XXX 9" 274 145351SRPA-30-SC-XX 30" 48 546 351SRPA-24-12-XXX 12" 241 129351SRPA-36-SC-XX 36" 48" 634 351SRPA-30-4-XXX 4" 475 246351SRPA-42-SC-XX 42" 48" 721 351SRPA-30-6-XXX 6" 393 205351SRPA-48-SC-XX 48" 48" 809 351SRPA-30-9-XXX 9" 312 164351SRPA-54-SC-XX 54" 48" 897 351SRPA-30-12-XXX 12" 149 83351SRPA-60-SC-XX 60 48" 985 351SRPA-36-4-XXX 4" 542 279

Split Roller(Dual) 351SRPA-36-6-XXX 6" 446 231Model Number 351SRPA-36-9-XXX 9" 349 183

351SRPA-36-12-XXX 12" 301 159351SRPA-6-DC-XX 6" 351SRPA-42-4-XXX 4" 609 313351SRPA-12-DC-XX 12" 351SRPA-42-6-XXX 6" 498 257351SRPA-18-DC-XX 18" 32 1/2" 341 351SRPA-42-9-XXX 9" 387 202351SRPA-24-DC-XX 24" 32 1/2" 534 351SRPA-42-12-XXX 12" 165 91351SRPA-30-DC-XX 30" 48 668 351SRPA-48-4-XXX 4" 676 346351SRPA-36-DC-XX 36" 48" 775 351SRPA-48-6-XXX 6" 550 283351SRPA-42-DC-XX 42" 48" 883 351SRPA-48-9-XXX 9" 425 221351SRPA-48-DC-XX 48" 48" 990 351SRPA-48-12-XXX 12" 362 189351SRPA-54-DC-XX 54" 48" 1092 351SRPA-54-4-XXX 4" 743 380351SRPA-60-DC-XX 60" 48" 1205 351SRPA-54-6-XXX 6" 503 260

351SRPA-54-9-XXX 9" 462 239351SRPA-54-12-XXX 12" 392 204351SRPA-60-4-XXX 4" 811 414351SRPA-60-6-XXX 6" 655 336351SRPA-60-9-XXX 9" 500 258351SRPA-60-12-XXX 12" 423 220

48"

54"

60"

42"

Model NumberWidth BF

Between Frame

90 Degree

Between Frame

90 DegreeRadius

18"

24"

30"

36"

Radius

Weight 10'0"

Weight 5'0"

Straight section - steelRoller

Centers


9"

12"

110

BALL TRANSFER UNITSBT(X)- SPECIFICATIONS

Square pattern

Staggered pattern

balls per ft.

wt. per ft.

balls per ft.

wt. per ft.

balls per ft.

wt. per ft.

balls per ft.

wt. per ft.

balls per ft.

wt. per ft.

balls per ft.

wt. per ft.

13 In. 36 28 20 22 6 17 13 In. 18 19 20 13 6 1015 In. 42 32 20 23 6 18 15 In. 22 32 20 15 6 1117 In. 48 35 24 26 8 20 17 In. 26 35 24 17 8 1319 In. 54 38 28 28 8 21 19 In. 29 38 28 19 8 1421 In. 60 42 28 30 8 22 21 In. 32 42 28 21 8 1623 In. 66 45 32 32 10 24 23 In. 35 45 32 23 10 1725 In. 72 48 36 34 10 25 25 In. 38 48 36 25 10 1927 In. 78 52 36 36 10 26 27 In. 41 52 36 27 10 2029 In. 84 55 36 38 12 28 29 In. 44 55 36 29 12 2231 In. 90 58 44 40 12 29 31 In. 47 58 44 31 12 2333 In. 96 62 44 42 12 30 33 In. 50 62 44 33 12 2535 In. 102 65 48 44 12 31 35 In. 53 65 48 35 12 2637 In. 108 69 52 47 14 33 37 In. 56 69 52 37 14 2839 In. 114 72 52 49 14 34 39 In. 59 72 52 39 14 2941 In. 120 75 52 51 14 36 41 In. 62 75 52 41 14 3143 In. 126 79 60 53 16 37 43 In. 65 79 60 43 16 3245 In. 132 82 60 55 16 38 45 In. 68 82 60 45 16 3447 In. 138 85 64 57 18 40 47 In. 71 85 64 47 18 3549 In. 144 88 64 59 18 41 49 In. 74 88 64 49 18 3751 In. 150 92 68 61 18 42 51 In. 77 92 68 51 18 38

Wt. for BTB frames for BTA frame deduct 2.3 lbs./ft. Wt ave.in./ft1.26 1.00 0.32 0.75

Between Frame (B.F.)

X= 6"Staggered Pattern

Between Frame (B.F.)

X=4" X=8"2" 3"

X = Pattern for between frames (B.F.)

X = Pattern for between frames (B.F.)

BALL ASSEMBLIES: 1" steel ball x 1-13/16 overall housing diameter. mounting bolts 1/4-20.

PLATES: Balls are attached in square/staggered pattern to a 10 gauge galvanized formed plate

CAPICITY: 50 lbs. per ball with maximum unit load not to exceed capicity of 4 balls (200#) frame capacity is 1300 lbs. Maximun distributed live load with support on 10' centers; 3200 lbs with supports on 5' centers

6" Square Pattern

FRAMES: 2-1/2" X 1" X 12 gauge (steel balls in set high position) or 3-1/2" X 1-1/2" X 10 gauge (steel balls in set high position ) (1/4" above frame).

X/2 = Amount staggered for (B.F.)Y = Pattern for length of conveyorY/2 = Amount staggered for length

Y = Pattern for length of conveyor

Supports

PS-1-(oaw) 6"-8" 8 TS-1-(BF) 12"-18" 7PS-2 8"-11" 8 TS-2-(BF) 18"-30" 10PS-3 11"-14" 9 TS-3-(BF) 24"-40" 12PS-4 14"-18" 11 TS-4-(BF) 30"-52" 15PS-5 18"-22" 14 TS-5-(BF) 40"-72" 21PS-6 22"-31" 20 TS-6-(BF) 60"-110" 25PS-7 24"-34" 23PS-8 34"-44" 24PS-9 44"-54" 27

PS-10 * 54"-72" 30PS-11 * 66"-84" 36PS-12 * 80"-100" 39

PS-13 * 96"-120" 42

* welded cross members

MT-1-OAW 14"-48" 46MT-2-OAW 14"-60" 52MT-3-OAW 14"-72" 58Add Tier 7

HDS-1-(oaw) 10"-12" 16HDS-2 12"-15" 18HDS-3 15"-18" 20HDS-4 18"-21" 27HDS-5 21"-24" 29HDS-6 24"-30" 32HDS-7 30"-36" 35HDS-8 36"-48" 43HDS-9 48"-60" 49HDS-10 60"-72" 10HDS-11 72"-84" 62

HDS-12 84"-96" 68

Accessories:Castered SupportSway BraceSizemic SupportsStainless SteelAluminum

Multi Tier Supports w/2 Teirs

Model No. Adjustable Height Wt.

Model No. Adjustable Height Wt. Wt.Adjustable

Height

Tripod Supports

Model No.

"H" Type Supports

Heavy duty "H" type support

Includes 1 pair Knee Braces

Model No. Adjustable Height Wt.

SMALL PARTS CONVEYOR

SPC SPECIFICATIONS

BELT WIDTHS: 4" TO 12"LENGTHS: From 3' to 30'BED: Slider bed, Formed steel 2 1/2" high x Width(Belt width + 1")DRIVE PULLEY: 2 5/8" dia Crowned Steel with 1" welded shaftTAKE-UP: Screw adjustment at tail pullie to provide belt tentionTAKE-UP PULLIE: 2 1/2" 11 ga roller flat face with 11/16 hex shaftBEARINGS: Sealed Greased bearingsMOTOR: 1/12 to 1/4 Hp Gear MotorBELT SPEED: Fixed 60 FPM (other speed avalible)CAPACITY: Max Load 100 lbs dist lengthSUPPORTS: Adjustable 28" to 40"

Belt Width 4 In. 6 In. 8 In. 10 In. 12 In.Bed Width 5 In. 7 In. 9 In. 11 In. 13 In.Bed Length(A)

3 Ft. 83 108 112 116 1204 Ft. 86 112 116 121 1255 Ft. 89 115 120 125 1306 Ft. 92 119 124 130 1357 Ft. 95 122 128 134 1408 Ft. 98 126 132 139 1459 Ft. 101 129 136 143 150

10 Ft. 104 133 140 148 15511 Ft. 107 136 144 152 16012 Ft. 110 140 148 157 16513 Ft. 113 143 152 161 17014 Ft. 116 147 156 166 17515 Ft. 119 150 160 170 18020 Ft. 122 154 164 175 185

Other bed widths and conveyor lengths avalable

BOX BED BELT CONVEYOR

Overall length "A"

Bed Width

Belt Width

BBBC SPECIFICATIONS5"

BELT WIDTHS: 6" TO 30" PVC 120 BLACKLENGTHS: From 3' TO 100'BOX BED: 12 Gauge formed box bed 5" high (Other Sizes & Capicity Avalible)DRIVE PULLEY: 4 1/2" Crowned with 1 3/16 shaft or 6" Crowned with 1 7/16 shaftTAKE-UP: Screw adjustment at tail pullie to provide belt tentionTAKE-UP PULLEY: 4 1/2" Crowned with 1 3/16 shaft or 6" Crowned with 1 7/16 shaftBEARINGS: Sealed Greased bearingsMOTOR: 1/3 to 2 Hp 56C Face And ReducerBELT SPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"

WEIGHTSBelt Wdith 6 9 12 15 18 21 24 27 30 33 36Bed Width 9 12 15 18 21 24 27 30 33 36 39

5 Ft. 4- 1/2 In. 457 459 461 463 465 467 469 471 473 475 47710 Ft. 4- 1/2 In. 529 561 593 625 657 689 721 753 785 817 84915 Ft. 4- 1/2 In. 624 660 696 732 768 804 840 876 912 948 98420 Ft. 4- 1/2 In. 720 760 800 840 880 920 960 1000 1040 1080 112025 Ft. 4- 1/2 In. 815 859 903 947 991 1035 1079 1123 1167 1211 125530 Ft. 4- 1/2 In. 911 959 1007 1055 1103 1151 1199 1247 1295 1343 139135 Ft. 4- 1/2 In. 1006 1058 1110 1162 1214 1266 1318 1370 1422 1474 152640 Ft. 4- 1/2 In. 1103 1158 1213 1268 1323 1378 1433 1488 1543 1598 165345 Ft. 4- 1/2 In. 1187 1252 1317 1382 1447 1512 1577 1642 1707 1772 183750 Ft. 4- 1/2 In. 1294 1357 1420 1483 1546 1609 1672 1735 1798 1861 192455 Ft. 6 In. 1388 1456 1524 1592 1660 1728 1796 1864 1932 2000 206860 Ft. 6 In. 1485 1556 1627 1698 1769 1840 1911 1982 2053 2124 219565 Ft. 6 In. 1597 1655 1713 1771 1829 1887 1945 2003 2061 2119 217770 Ft. 6 In. 1676 1755 1834 1913 1992 2071 2150 2229 2308 2387 246675 Ft. 6 In. 1770 1854 1938 2022 2106 2190 2274 2358 2442 2526 261080 Ft. 6 In. 1867 1954 2041 2128 2215 2302 2389 2476 2563 2650 273785 Ft. 6 In. 1961 2053 2145 2237 2329 2421 2513 2605 2697 2789 288190 Ft. 6 In. 2058 2153 2248 2343 2438 2533 2628 2723 2818 2913 300895 Ft. 6 In. 2154 2253 2352 2451 2550 2649 2748 2847 2946 3045 3144

100 Ft. 6 In. 2249 2352 2455 2558 2661 2764 2867 2970 3073 3176 3279

Bed Length

(A)

Sugested Pulley

Diameter

OPTIONS INCLUDE: Special belting, Center drives, Side mounted or overhead mounted drives, Auxiliary take-ups, Nose-overs,Side tables, Floor supports,Guard rails,Belt speed and Motors

SLIDER BED BELT CONVEYORA

Pop-Out Rollers Pop-Out Rollers

H

Bed Width

B.F.

Belt Width

SBBC SPECIFICATIONS 7"

BELT WIDTHS: 6" TO 36" PVC 120 BLACKLENGTHS: From 3' TO 100'SLIDER BED: 7" x 1.5 Channels with 12 ga DeckDRIVE PULLEY: 4 1/2" Crowned with 1 3/16 shaft or 6" Crowned with 1 7/16 shaftTAKE-UP: Screw adjustment at tail pullie to provide belt tentionTAKE-UP PULLEY: 4 1/2" Crowned with 1 3/16 shaft or 6" Crowned with 1 7/16 shaftBEARINGS: Sealed Greased bearingsMOTOR: 1/3 to 2 Hp 56C Face And ReducerBELT SPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"



100 Ft. 6 In. 2187 2352 2517 2682 2847 3012 3177 3342 3507 3672 4002

Bed Length(A

)

Sugested Pulley

Diameter


ROLLER BED BELT CONVEYOR"A"

Pop Out Roller Pop Out Roller

"H"

Bed Width

B.F.

Belt Width

RBBC SPECIFICATIONS

BELT WIDTHS: 6" TO 84" PVC 120 BLACKLENGTHS: From 3' TO 100' 7"FRAME: 7" x 1-1/2" x12 Gauge channel frameROLLER BED: 1.9 X 16 ga galv steel rolls on 6" ctrs(Other sizes & capicity avalible)DRIVE PULLEY: 4 1/2" Crowned with 1 3/16 shaft or 6" Crowned with 1 7/16 shaftTAKE-UP: Screw adjustment at tail pullie to provide belt tentionTAKE-UP PULLEY: 4 1/2" Crowned with 1 3/16 shaft or 6" Crowned with 1 7/16 shaftBEARINGS: Sealed Greased bearingsMOTOR: 1/3 to 2 Hp 56C Face And ReducerBELT SPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"



100 Ft. 6 In. 2249 2352 2455 2558 2661 2764 2867 2970 3073 3176 3279

Bed Length(A

)

Sugested Pulley

Diameter


INCLINE SLIDER/ROLLER BELT CONVEYORA

H3

A = Horizontal Length H1= Net LiftH2 = Infeed HeightH3 = Discharge Height

H1

H2

ISBBC & IRBBC SPECIFICATIONS

6" Crowned with 1 3/16" shaft

BED ROLLERS: 1.9 x 16 ga Galvanized on 6" ctrs

TAKE-UP: Screw adjustment at tail pulley to provide belt tention

WEIGHTSBelt Wdith 6 9 12 15 18 21 24 27 30 33 36Overall Width 11 14 17 20 23 26 29 32 35 38 41

10 Ft. 45. In. 646 752 858 964 1070 1176 1283 1389 1495 1601 170712 Ft. 55. In. 667 777 886 995 1105 1214 1324 1433 1542 1652 176114 Ft. 65. In. 680 797 914 1031 1148 1265 1383 1500 1617 1734 185116 Ft. 75. In. 710 826 942 1058 1174 1290 1406 1521 1637 1753 186918 Ft. 85. In. 732 851 970 1089 1208 1327 1447 1566 1685 1804 192320 Ft. 95. In. 753 876 998 1120 1243 1365 1488 1610 1732 1855 197722 Ft. 105. In. 777 903 1028 1153 1279 1404 1530 1655 1780 1906 203124 Ft. 115. In. 796 925 1054 1183 1312 1441 1570 1698 1827 1956 208526 Ft. 125. In. 818 950 1082 1214 1346 1478 1611 1743 1875 2007 213928 Ft. 135. In. 839 975 1110 1245 1381 1516 1652 1787 1922 2058 219330 Ft. 145. In. 861 999 1138 1277 1415 1554 1693 1831 1970 2108 224732 Ft. 155. In. 882 1024 1166 1308 1450 1592 1734 1875 2017 2159 230134 Ft. 165. In. 904 1049 1194 1339 1484 1629 1775 1920 2065 2210 235536 Ft. 175. In. 800 961 1122 1283 1444 1605 1766 1926 2087 2248 240938 Ft. 185. In. 947 1098 1250 1402 1553 1705 1857 2008 2160 2311 246340 Ft. 195. In. 968 1123 1278 1433 1588 1743 1898 2052 2207 2362 251742 Ft. 205. In. 990 1148 1306 1464 1622 1780 1939 2097 2255 2413 257144 Ft. 215. In. 1001 1160 1320 1480 1640 1799 1959 2119 2279 2438 259848 Ft. 225. In. 1011 1173 1334 1495 1657 1818 1980 2141 2302 2464 262548 Ft. 235. In. 1022 1185 1348 1511 1674 1837 2000 2163 2326 2489 265250 Ft. 245. In. 1033 1197 1362 1527 1691 1856 2021 2185 2350 2514 2679

or 8" Crowned with 1 7/16" shaft

Horizontal Distance (A)

Net lift at 25 degrees

OPTIONS INCLUDE: Special belting, Center drives, Side mounted or overhead mounted drives, Auxiliary take-ups, Nose-overs, Side tables, Floor supports, Guard rails, Return Pans, Belt speed and Motors

BELT SPEED: Fixed 60 FPM (other speed avalible)MOTOR: 1/2 to 2 Hp 56C Face (Brake optional)BEARINGS: Sealed Greased bearings

DOUBLE NOSE-OVER: Adjustable from 0˚ to 25˚

RETURN ROLLER: 1.9" X 16 ga galv.SNUB ROLLER: 2 1/2" x 11 ga hot rolled

TAKE-UP PULLEY: 4 1/2" Crowned with 1 3/16" shaft or

Shown with optional center drive & feeder

SLIDER BED: 12 Ga or 14 Ga with welded angle stiffeners

BELT WIDTHS: 6" TO 42" PVC RUFF TOP BLACKFRAME: 7" x 1.5" Channels 12 ga Hot Rolled or Galvanized

DRIVE PULLEY: 4 1/2" or 6" Crowned with 1 3/16" shaftINCLINE: Up to 25 Degrees

FBDLR138 SPECIFICATIONS

TREAD ROLLERS & FRAME: 1-3/8" X 18 ga steel rolls In a 7" x 1 1/2" x 12 ga. Frame with pop-out roller designBED WIDTHS: 12" - 30"ROLLER CENTERS: 1-1/2", 3", 4-1/2",6", 9", & 12" centersPRESSURE ROLLS: 1-3/8" x 18 ga. Adjustable pressure zonesLENGTHS: From 3' TO 100'DRIVE PULLEY: 4" Crowned with 1 3/16 shaft on end drive(6" Crowned with 1 7/16 shaft on center drive)TAKE-UP: Screw adjustment at tail pullie to provide belt tentionTAKE-UP PULLEY/END PULLIE: 4" Crowned with 1 3/16 shaftBEARINGS: Sealed Greased bearingsMOTOR: 1/3 to 2 Hp 56C Face And ReducerBELT SPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"

B.F. 10 13 16 19 22 25 28 30Bed Width 13 16 19 22 25 28 31 33

Driving Belt5 Ft. 385 416 447 478 504 540 571 602

10 Ft. 507 555 603 650 690 746 794 84215 Ft. 630 694 759 822 877 953 1017 108220 Ft. 752 833 915 994 1063 1159 1240 132225 Ft. 1.5" Roll Centers 874 972 1071 1167 1250 1365 1463 156130 Ft. 997 1112 1226 1339 1436 1571 1686 180135 Ft. 1119 1251 1382 1511 1623 1778 1909 204140 Ft. 1241 1390 1538 1683 1809 1984 2132 228145 Ft. 1364 1529 1694 1855 1996 2190 2355 252150 Ft. 1486 1668 1850 2027 2182 2396 2578 276155 Ft. 1608 1807 2006 2200 2369 2603 2802 300060 Ft. 1730 1946 2162 2372 2555 2809 3025 324065 Ft. 1853 2085 2318 2544 2742 3015 3248 348070 Ft. 1975 2224 2474 2716 2928 3221 3471 372075 Ft. 1.5" Roll Centers 2097 2363 2630 2888 3115 3428 3694 396080 Ft. 2220 2503 2785 3060 3301 3634 3917 420085 Ft. 2342 2642 2941 3233 3488 3840 4140 443990 Ft. 2464 2781 3097 3405 3674 4046 4363 467995 Ft. 2587 2920 3253 3577 3861 4253 4586 4919

100 Ft. 2709 3059 3409 3749 4047 4459 4809 5159Deduct per foot for 3" ctrs 3.1 3.54 3.98 4.42 4.86 5.3 5.75 7.5

Bed Length(A)

OPTIONS INCLUDE: Center drives, Side mounted or overhead mounted drives, Auxiliary take-ups,Side tables, Floor supports,Guard rails,Belt speed and Motors

FLAT BELT DRIVEN 1-3/8" LIVE ROLLER

6" 8" 12"

"A"

"H"

Bed Width

B.F.

Belt Width

7"

FBDLR196 SPECIFICATIONS

TREAD ROLLERS & FRAME: 1.9" x 16 ga steel rolls(12 ga & 9ga avalable) In a 7" x 1 1/2" x 12 ga. frameBED WIDTHS: 15" - 84"ROLLER CENTERS: 2", 3", 4-1/2",6", 9", & 12" centersPRESSURE ROLLS: 1.9 x 16 ga. Adjustable cam pressure zonesLENGTHS: From 6' TO 100'DRIVE PULLEY: 4" Crowned with 1 3/16 shaft on end drive(6" Crowned with 1 7/16 shaft on center drive)TAKE-UP: Screw adjustment at tail pullie to provide belt tentionTAKE-UP PULLEY/END PULLIE: 4" Crowned with 1 3/16 shaftBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)MOTOR: 1/3 to 2 Hp 56C Face And ReducerBELT SPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"

B.F. 15 18 21 24 27 30 33 36Bed Width 18 21 24 27 30 33 36 39Belt Width

5 Ft. 380 416 452 488 524 560 596 63210 Ft. 520 556 607 659 710 762 813 88015 Ft. 799 835 918 1000 1083 1165 1248 137720 Ft. 939 975 1073 1171 1269 1367 1465 162525 Ft. 3" Roll Centers 1079 1115 1228 1342 1455 1569 1683 187430 Ft. 1219 1255 1384 1513 1642 1771 1900 212235 Ft. 1358 1394 1539 1683 1828 1973 2117 237140 Ft. 1498 1534 1694 1854 2014 2175 2335 261945 Ft. 1638 1674 1849 2025 2201 2376 2552 286750 Ft. 1778 1814 2005 2196 2387 2578 2769 311655 Ft. 1917 1953 2160 2367 2573 2780 2987 336460 Ft. 2057 2093 2315 2537 2760 2982 3204 361365 Ft. 2197 2233 2470 2708 2946 3184 3421 386170 Ft. 2337 2372 2626 2879 3132 3386 3639 410975 Ft. 3" Roll Centers 2476 2512 2781 3050 3319 3587 3856 435880 Ft. 2616 2652 2936 3221 3505 3789 4074 460685 Ft. 2756 2792 3092 3391 3691 3991 4291 485590 Ft. 2896 2931 3247 3562 3878 4193 4508 510395 Ft. 3035 3071 3402 3733 4064 4395 4726 5352

100 Ft. 3175 3521 3868 4214 4561 4907 5254 5600

Bed Length(A)


FLAT BELT DRIVEN 1.9" LIVE ROLLER

6" 8" 12"

LSLR138 SPECIFICATIONS

TREAD ROLLERS & FRAME: 1-3/8 x 18 ga steel rolls In a7" x 1 1/2" x 12 ga. frameBED WIDTHS: 10" - 28"ROLLER CENTERS: 1.5", 3", 4-1/2",6", 9", & 12" centersLINE SHAFT: 1" dia with 3/16" polyurethane drive belts. Nominal 15 lbs drive per rollerLENGTHS: From 6' TO 100'Coulpings: Flexible jaw couplings with shock absorbing insert both endsCENTER DRIVE: Reversable drive; may be located almost anywere on length of conveyorROLLER CHAIN: Drive shaft is driven by # 50 chain with takeup on motor baseBEARINGS: Sealed Greased bearingsMOTOR: 1/3 to 2 Hp 56C Face And ReducerSPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"

Bed Length(A) B.F. 10 12 14 16 18 22 24 26Bed Width 13 15 17 19 21 25 27 29


100 Ft. 3848 3289 3669 4012 4240 4601 4810 5190


LINE SHAFT LIVE ROLLER - 1-3/8" x 18 GA.


TREAD ROLLERS & FRAME: 1.9" x 16 ga steel rolls(12 ga & 9ga avalable) In a 4 1/2" x 1 1/2" x 12 ga. frameBED WIDTHS: 15" - 84"ROLLER CENTERS: 2", 3", 4-1/2",6", 9", & 12" centersLINE SHAFT: 1" dia with 3/16" polyurethane drive belts. Nominal 15 lbs drive per rollerLENGTHS: From 6' TO 100'Coulpings: Flexible jaw couplings with shock absorbing insert both endsCENTER DRIVE: Reversable drive; may be located almost anywere on length of conveyorROLLER CHAIN: Drive shaft is driven by # 50 chain with takeup on motor baseBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)MOTOR: 1/3 to 2 Hp 56C Face And ReducerSPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"



100 Ft. 3848 3289 3669 4012 4240 4601 4810 5190


LINE SHAFT LIVE ROLLER - 1.9 X 16 GA


TREAD ROLLERS & FRAME: 1.9" x 16 ga steel rolls(12 ga & 9ga avalable) In a 4 1/2" x 1 1/2" x 12 ga. frameBED WIDTHS: 15" - 84"ROLLER CENTERS: 2", 3", 4-1/2",6", 9", & 12" centersLINE SHAFT: 1" dia with 3/16" polyurethane drive belts. Nominal 15 lbs drive per rollerLENGTHS: From 6' TO 100'Coulpings: Flexible jaw couplings with shock absorbing insert both endsCENTER DRIVE: Reversable drive; may be located almost anywere on length of conveyorROLLER CHAIN: Drive shaft is driven by # 50 chain with takeup on motor baseBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)MOTOR: 1/3 to 2 Hp 56C Face And ReducerSPEED: Fixed 60 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40"



100 Ft. 3848 3289 3669 4012 4240 4601 4810 5190


LINE SHAFT LIVE ROLLER - 1.9 X 16 GA

CDLR192 SPECIFICATIONS

TREAD ROLLERS & FRAME: 1.9" x 12 ga steel rolls In a 3 1/2" x 1 1/2" x 12 ga. Frame (4 1/2 on drive side)BED WIDTHS: 15" - 84"ROLLER CENTERS: , 4",5",6", 9", & 12" centersDRIVE CHAIN: No. 40 or No. 50 Chain driven roll to rollLENGTHS: From 6' TO 80'(Load & Chain Loop Dependant)CHAIN GUARD: Two piece clam shell type guard, totally enclosed drive chainDRIVE: Mounted underneath center of conveyory,but may be mounted Overhead,End or Side MountBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)MOTOR: 1/3 to 2 Hp 56C Face And ReducerCONVEYOR SPEED: Fixed 45 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40" on 10' centers and should be lagged to floorSpur and Curve: Information available upon request

Between Frame(B.F) 12 17 22 27 32 37 42 47Effective

Width(E.W.) 15 20 25 30 35 40 45 50

Overall Width 18 23 28 33 38 43 48 535 Ft. 319 349 379 409 439 469 499 529

10 Ft. 474 504 504 504 504 504 504 50415 Ft. 629 659 689 719 749 779 809 83920 Ft. 784 814 844 874 904 934 964 99425 Ft. 939 969 999 1029 1059 1089 1119 114930 Ft. 1094 1124 1154 1184 1214 1244 1274 130435 Ft. 1249 1279 1309 1339 1369 1399 1429 145940 Ft. 1404 1434 1464 1494 1524 1554 1584 16145 Ft. 282 300 317 335 352 370 387 405

10 Ft. 474 491 509 526 544 561 579 59630 Ft. 1094 1111 1129 1146 1164 1181 1199 121640 Ft. 1404 1421 1439 1456 1474 1491 1509 152650 Ft. 1713 1731 1748 1766 1783 1801 1818 183660 Ft. 2023 2041 2058 2076 2093 2111 2128 214670 Ft. 2333 2351 2368 2386 2403 2421 2438 245680 Ft. 2643 2661 2678 2696 2713 2731 2748 2766

Bed Length(A)

OPTIONS INCLUDE: Center drives, Side mounted or overhead mounted drives, Tread plated, Right angle transfers, Floor supports,Guard rails,Washdown application, Intermediat Support roller for closer roller centers.

CHAIN DRIVEN 1.9" LIVE ROLLER

4" Roll Centers

9" Roll Centers


TREAD ROLLERS & FRAME: 1.9" x 12 ga steel rolls In a 3 1/2" x 1 1/2" x 12 ga. Frame (4 1/2 on drive side)BED WIDTHS: 15" - 84"ROLLER CENTERS: , 4",5",6", 9", & 12" centersDRIVE CHAIN: No. 40 or No. 50 Chain driven roll to rollLENGTHS: From 6' TO 80'(Load & Chain Loop Dependant)CHAIN GUARD: Two piece clam shell type guard, totally enclosed drive chainDRIVE: Mounted underneath center of conveyory,but may be mounted Overhead,End or Side MountBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)MOTOR: 1/3 to 2 Hp 56C Face And ReducerCONVEYOR SPEED: Fixed 45 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40" on 10' centers and should be lagged to floorSpur and Curve: Information available upon request

Between Frame(B.F) 12 17 22 27 32 37 42 47Effective

Width(E.W.) 15 20 25 30 35 40 45 50

Overall Width 18 23 28 33 38 43 48 535 Ft. 319 349 379 409 439 469 499 529


10 Ft. 474 491 509 526 544 561 579 59630 Ft. 1094 1111 1129 1146 1164 1181 1199 121640 Ft. 1404 1421 1439 1456 1474 1491 1509 152650 Ft. 1713 1731 1748 1766 1783 1801 1818 183660 Ft. 2023 2041 2058 2076 2093 2111 2128 214670 Ft. 2333 2351 2368 2386 2403 2421 2438 245680 Ft. 2643 2661 2678 2696 2713 2731 2748 2766

Bed Length(A)



4" Roll Centers

9" Roll Centers


TREAD ROLLERS & FRAME: 2.5 X 11 ga steel rolls, 11/16 hex axels In a 4" X 5.4 Steel Frame (6" x 8.2 on drive side) with 3" X 4.1# cross membersEFFECTIVE WIDTHS(EW): 15" - 84" (BF-3")ROLLER CENTERS: , 4.5",5",6",7.5",10",12",15"DRIVE CHAIN: No. 50 or No. 60 Chain driven roll to rollLENGTHS: From 6' TO 80'(Load & Chain Loop Dependant)CHAIN GUARD: Two piece 10 ga. HRS clam shell type guard, totally enclosed drive chainDRIVE: Mounted underneath center of conveyory,but may be mounted Overhead,End or Side MountBEARINGS: Sealed Greased bearings (750# cap/roller @ 18" bf 35 F.P.M.)MOTOR: 3/4 to 2 Hp 56C Face And ReducerCONVEYOR SPEED: Fixed 35 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40" on 10' centers and should be lagged to floorSpur and Curve: Information available upon request

Between Frame(B.F) 12 17 22 27 32 37 42 47

Effective Width(E.W.) 15 20 25 30 35 40 45 50

Overall Width 18 23 28 33 38 43 48 535 Ft. 389 419 450 480 511 541 571 602


10 Ft. 675 699 723 746 770 794 817 84130 Ft. 1820 1844 1868 1891 1915 1939 1962 198640 Ft. 2393 2417 2440 2464 2488 2511 2535 255950 Ft. 2965 2989 3013 3036 3060 3084 3108 313160 Ft. 3538 3562 3585 3609 3633 3656 3680 370470 Ft. 4110 4134 4158 4182 4205 4229 4253 427680 Ft. 4683 4707 4730 4754 4778 4801 4825 4849

Bed Length(A)



4.5" Roll Centers

9" Roll Centers

SLR196SR SPECIFICATIONS

TREAD ROLLERS & FRAME: 1.9" x 16 ga steel rolls In a 7"" x 1 1/2" x 12 ga. frameBED WIDTHS: 15" - 60"ROLLER CENTERS: 3" centersPRESSURE ROLLS: 62mm Polyurithain Skatewheel with 608-RR percision bearingLENGTHS: From 2' TO UnlimitedDRIVE ROLLER: 1.9 dia 24 volt brushless dc motor with controller cardADJUSTMENT: Individual roller tentioning to allow minimun to no slip on rdive rollerBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)POWER SUPPLY: Dual Voltage 110/220 Volt 300 watt power supplySPEED: Individual roller zone speed sdjustment from 10 to 120 f.p.m.SUPPORTS: Adjustable 28" to 40"



100 Ft. 3175 3521 3868 4214 4561 4907 5254 5600

OPTIONS INCLUDE: Side tables, Floor supports,Guard rails.

SIMPLE LIVE ROLLER 1.9" DIA

SLR196SR SPECIFICATIONS

TREAD ROLLERS & FRAME: 1.9" x 16 ga steel rolls In a 7"" x 1 1/2" x 12 ga. frameBED WIDTHS: 15" - 60"ROLLER CENTERS: 3" centersPRESSURE ROLLS: 62mm Polyurithain Skatewheel with 608-RR percision bearingLENGTHS: From 2' TO UnlimitedDRIVE ROLLER: 1.9 dia 24 volt brushless dc motor with controller cardADJUSTMENT: Individual roller tentioning to allow minimun to no slip on rdive rollerBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)POWER SUPPLY: Dual Voltage 110/220 Volt 300 watt power supplySPEED: Individual roller zone speed sdjustment from 10 to 120 f.p.m.SUPPORTS: Adjustable 28" to 40"



100 Ft. 3175 3521 3868 4214 4561 4907 5254 5600


SIMPLE LIVE ROLLER 1.9" DIA

SLRA196SR SPECIFICATIONS

TREAD ROLLERS & FRAME: 1.9" x 16 ga steel rolls In a 7"" x 1 1/2" x 12 ga. frameBED WIDTHS: 15" - 60"ROLLER CENTERS: 3" centersPRESSURE ROLLS: 62mm Polyurithain Skatewheel with 608-RR percision bearingLENGTHS: From 2' TO UnlimitedDRIVE ROLLER: 1.9 dia 24 volt brushless dc motor with controller cardADJUSTMENT: Individual roller tentioning to allow minimun to no slip on rdive rollerBEARINGS: Sealed Greased bearings (Precision Quiet Brgs Avable)POWER SUPPLY: Dual Voltage 110/220 Volt 300 watt power supplySPEED: Individual roller zone speed sdjustment from 10 to 120 f.p.m.SUPPORTS: Adjustable 28" to 40"ZONES: 18" to 36"



100 Ft. 3175 3521 3868 4214 4561 4907 5254 5600

SIMPLE LIVE ROLLER ACCUMULATOR



TREAD ROLLERS & FRAME: 3.5 X .300 wall steel rolls In a 6" x 8.2# Steel Frame (MC 8" x 8.5 on drive side)BED WIDTHS: 15" - 84"ROLLER CENTERS: 6",7.5",12"DRIVE CHAIN: No. 60 or No. 80 Chain driven roll to rollLENGTHS: From 6' TO 80'(Load & Chain Loop Dependant)CHAIN GUARD: Two piece clam shell type guard, totally enclosed drive chainDRIVE: Mounted underneath center of conveyory,but may be mounted Overhead,End or Side MountBEARINGS: Sealed Greased bearings MOTOR: 3/4 to 2 Hp 56C Face And ReducerCONVEYOR SPEED: Fixed 35 FPM (other speed avalible)SUPPORTS: Adjustable 28" to 40" on 10' centers and should be lagged to floorSpur and Curve: Information available upon request

0 6 12 18 24Between

Frame(B.F) 35 41 47 53 59Effective

Width(E.W.) 39 45 51 57 63

Overall Width 42 3/4 48 3/4 54 3/4 60 3/4 66 3/4 6" RC

12" RC6" RC

12" RC6" RC

12" RC6" RC

12" RC6" RC

12" RC6" RC

12" RC6" RC

12" RC6" RC

12" RC

70 Ft.

80 Ft.

Other roller BF's and conveyor lengths avalable

Bed Length(A)

30 Ft.

40 Ft.

50 Ft.

60 Ft.



10 Ft.

20 Ft.

Documents

ORDER: PURCHASE ORDER NO. - Apex Conveyor1 3/8" Diameter x 18 Gauge Roller Conveyor 138SRGA- SPECIFICATIONS WIDTHS: 10", 13", 16" and 22" Between Frame (B.F.) LENGTHS: 5' and 10' straight